summaryrefslogtreecommitdiff
path: root/board/bf527-ezkit
diff options
context:
space:
mode:
Diffstat (limited to 'board/bf527-ezkit')
-rw-r--r--board/bf527-ezkit/bf527-ezkit.c20
-rw-r--r--board/bf527-ezkit/video.c148
2 files changed, 147 insertions, 21 deletions
diff --git a/board/bf527-ezkit/bf527-ezkit.c b/board/bf527-ezkit/bf527-ezkit.c
index 2cbfa8d..a911880 100644
--- a/board/bf527-ezkit/bf527-ezkit.c
+++ b/board/bf527-ezkit/bf527-ezkit.c
@@ -24,13 +24,6 @@ int checkboard(void)
return 0;
}
-phys_size_t initdram(int board_type)
-{
- gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
- gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE;
- return gd->bd->bi_memsize;
-}
-
#ifdef CONFIG_BFIN_MAC
static void board_init_enetaddr(uchar *mac_addr)
{
@@ -75,3 +68,16 @@ int misc_init_r(void)
return 0;
}
+
+#ifdef CONFIG_USB_BLACKFIN
+void board_musb_init(void)
+{
+ /*
+ * BF527 EZ-KITs require PG13 to be high for HOST mode
+ */
+ bfin_write_PORTG_FER(bfin_read_PORTG_FER() & ~PG13);
+ bfin_write_PORTGIO_DIR(bfin_read_PORTGIO_DIR() | PG13);
+ bfin_write_PORTGIO_SET(PG13);
+ SSYNC();
+}
+#endif
diff --git a/board/bf527-ezkit/video.c b/board/bf527-ezkit/video.c
index 57652be..8f6ea23 100644
--- a/board/bf527-ezkit/video.c
+++ b/board/bf527-ezkit/video.c
@@ -12,40 +12,111 @@
#include <malloc.h>
#include <asm/blackfin.h>
#include <asm/mach-common/bits/dma.h>
-#include <i2c.h>
+#include <spi.h>
#include <linux/types.h>
#include <stdio_dev.h>
-#define DMA_SIZE16 2
-
#include <asm/mach-common/bits/ppi.h>
#include <asm/mach-common/bits/timer.h>
-#include <asm/bfin_logo_230x230.h>
-
#define LCD_X_RES 320 /* Horizontal Resolution */
#define LCD_Y_RES 240 /* Vertical Resolution */
-#define LCD_BPP 24 /* Bit Per Pixel */
-#define LCD_PIXEL_SIZE (LCD_BPP / 8)
+#define DMA_BUS_SIZE 16
+
+#ifdef CONFIG_MK_BF527_EZKIT_REV_2_1 /* lq035q1 */
+
+#if !defined(CONFIG_LQ035Q1_USE_RGB888_8_BIT_PPI) && \
+ !defined(CONFIG_LQ035Q1_USE_RGB565_8_BIT_PPI)
+# define CONFIG_LQ035Q1_USE_RGB565_8_BIT_PPI
+#endif
+
+/* Interface 16/18-bit TFT over an 8-bit wide PPI using a
+ * small Programmable Logic Device (CPLD)
+ * http://blackfin.uclinux.org/gf/project/stamp/frs/?action=FrsReleaseBrowse&frs_package_id=165
+ */
+
+#ifdef CONFIG_LQ035Q1_USE_RGB565_8_BIT_PPI
+#include <asm/bfin_logo_rgb565_230x230.h>
+#define LCD_BPP 16 /* Bit Per Pixel */
+#define CLOCKS_PPIX 2 /* Clocks per pixel */
+#define CPLD_DELAY 3 /* RGB565 pipeline delay */
+#endif
+
+#ifdef CONFIG_LQ035Q1_USE_RGB888_8_BIT_PPI
+#include <asm/bfin_logo_230x230.h>
+#define LCD_BPP 24 /* Bit Per Pixel */
+#define CLOCKS_PPIX 3 /* Clocks per pixel */
+#define CPLD_DELAY 5 /* RGB888 pipeline delay */
+#endif
+
+/*
+ * HS and VS timing parameters (all in number of PPI clk ticks)
+ */
+
+#define H_ACTPIX (LCD_X_RES * CLOCKS_PPIX) /* active horizontal pixel */
+#define H_PERIOD (336 * CLOCKS_PPIX) /* HS period */
+#define H_PULSE (2 * CLOCKS_PPIX) /* HS pulse width */
+#define H_START (7 * CLOCKS_PPIX + CPLD_DELAY) /* first valid pixel */
+
+#define U_LINE 4 /* Blanking Lines */
+
+#define V_LINES (LCD_Y_RES + U_LINE) /* total vertical lines */
+#define V_PULSE (2 * CLOCKS_PPIX) /* VS pulse width (1-5 H_PERIODs) */
+#define V_PERIOD (H_PERIOD * V_LINES) /* VS period */
+
+#define ACTIVE_VIDEO_MEM_OFFSET ((U_LINE / 2) * LCD_X_RES * (LCD_BPP / 8))
+
+/*
+ * LCD Modes
+ */
+#define LQ035_RL (0 << 8) /* Right -> Left Scan */
+#define LQ035_LR (1 << 8) /* Left -> Right Scan */
+#define LQ035_TB (1 << 9) /* Top -> Botton Scan */
+#define LQ035_BT (0 << 9) /* Botton -> Top Scan */
+#define LQ035_BGR (1 << 11) /* Use BGR format */
+#define LQ035_RGB (0 << 11) /* Use RGB format */
+#define LQ035_NORM (1 << 13) /* Reversal */
+#define LQ035_REV (0 << 13) /* Reversal */
+
+#define LQ035_INDEX 0x74
+#define LQ035_DATA 0x76
-#define DMA_BUS_SIZE 16
-#define LCD_CLK (12*1000*1000) /* 12MHz */
+#define LQ035_DRIVER_OUTPUT_CTL 0x1
+#define LQ035_SHUT_CTL 0x11
-#define CLOCKS_PER_PIX 3
+#define LQ035_DRIVER_OUTPUT_MASK (LQ035_LR | LQ035_TB | LQ035_BGR | LQ035_REV)
+#define LQ035_DRIVER_OUTPUT_DEFAULT (0x2AEF & ~LQ035_DRIVER_OUTPUT_MASK)
+
+#define LQ035_SHUT (1 << 0) /* Shutdown */
+#define LQ035_ON (0 << 0) /* Shutdown */
+
+#ifndef CONFIG_LQ035Q1_LCD_MODE
+#define CONFIG_LQ035Q1_LCD_MODE (LQ035_NORM | LQ035_RL | LQ035_TB | LQ035_BGR)
+#endif
+
+#else /* t350mcqb */
+#include <asm/bfin_logo_230x230.h>
+
+#define LCD_BPP 24 /* Bit Per Pixel */
+#define CLOCKS_PPIX 3 /* Clocks per pixel */
/* HS and VS timing parameters (all in number of PPI clk ticks) */
-#define H_ACTPIX (LCD_X_RES * CLOCKS_PER_PIX) /* active horizontal pixel */
-#define H_PERIOD (408 * CLOCKS_PER_PIX) /* HS period */
+#define H_ACTPIX (LCD_X_RES * CLOCKS_PPIX) /* active horizontal pixel */
+#define H_PERIOD (408 * CLOCKS_PPIX) /* HS period */
#define H_PULSE 90 /* HS pulse width */
#define H_START 204 /* first valid pixel */
#define U_LINE 1 /* Blanking Lines */
-#define V_LINES (LCD_Y_RES + U_LINE) /* total vertical lines */
+#define V_LINES (LCD_Y_RES + U_LINE) /* total vertical lines */
#define V_PULSE (3 * H_PERIOD) /* VS pulse width (1-5 H_PERIODs) */
#define V_PERIOD (H_PERIOD * V_LINES) /* VS period */
#define ACTIVE_VIDEO_MEM_OFFSET (U_LINE * H_ACTPIX)
+#endif
+
+#define LCD_PIXEL_SIZE (LCD_BPP / 8)
+#define DMA_SIZE16 2
#define PPI_TX_MODE 0x2
#define PPI_XFER_TYPE_11 0xC
@@ -53,6 +124,40 @@
#define PPI_PACK_EN 0x80
#define PPI_POLS_1 0x8000
+#ifdef CONFIG_MK_BF527_EZKIT_REV_2_1
+static struct spi_slave *slave;
+static int lq035q1_control(unsigned char reg, unsigned short value)
+{
+ int ret;
+ u8 regs[3] = {LQ035_INDEX, 0, 0};
+ u8 data[3] = {LQ035_DATA, 0, 0};
+ u8 dummy[3];
+
+ regs[2] = reg;
+ data[1] = value >> 8;
+ data[2] = value & 0xFF;
+
+ if (!slave) {
+ /* FIXME: Verify the max SCK rate */
+ slave = spi_setup_slave(CONFIG_LQ035Q1_SPI_BUS,
+ CONFIG_LQ035Q1_SPI_CS, 20000000,
+ SPI_MODE_3);
+ if (!slave)
+ return -1;
+ }
+
+ if (spi_claim_bus(slave))
+ return -1;
+
+ ret = spi_xfer(slave, 24, regs, dummy, SPI_XFER_BEGIN | SPI_XFER_END);
+ ret |= spi_xfer(slave, 24, data, dummy, SPI_XFER_BEGIN | SPI_XFER_END);
+
+ spi_release_bus(slave);
+
+ return ret;
+}
+#endif
+
/* enable and disable PPI functions */
void EnablePPI(void)
{
@@ -80,7 +185,7 @@ void Init_PPI(void)
*pPPI_DELAY = H_START;
*pPPI_COUNT = (H_ACTPIX-1);
- *pPPI_FRAME = 0;
+ *pPPI_FRAME = V_LINES;
/* PPI control, to be replaced with definitions */
*pPPI_CONTROL = PPI_TX_MODE | /* output mode , PORT_DIR */
@@ -188,9 +293,20 @@ void DisableTIMER1(void)
SSYNC();
}
+void EnableTIMER12(void)
+{
+ *pTIMER_ENABLE |= TIMEN1 | TIMEN0;
+ SSYNC();
+}
+
int video_init(void *dst)
{
+#ifdef CONFIG_MK_BF527_EZKIT_REV_2_1
+ lq035q1_control(LQ035_SHUT_CTL, LQ035_ON);
+ lq035q1_control(LQ035_DRIVER_OUTPUT_CTL, (CONFIG_LQ035Q1_LCD_MODE &
+ LQ035_DRIVER_OUTPUT_MASK) | LQ035_DRIVER_OUTPUT_DEFAULT);
+#endif
Init_Ports();
Init_DMA(dst);
EnableDMA();
@@ -199,6 +315,9 @@ int video_init(void *dst)
Init_PPI();
EnablePPI();
+#ifdef CONFIG_MK_BF527_EZKIT_REV_2_1
+ EnableTIMER12();
+#else
/* Frame sync 2 (VS) needs to start at least one PPI clk earlier */
EnableTIMER1();
/* Add Some Delay ... */
@@ -209,6 +328,7 @@ int video_init(void *dst)
/* now start frame sync 1 */
EnableTIMER0();
+#endif
return 0;
}