summaryrefslogtreecommitdiff
path: root/board/balloon3/balloon3.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/balloon3/balloon3.c')
-rw-r--r--board/balloon3/balloon3.c228
1 files changed, 228 insertions, 0 deletions
diff --git a/board/balloon3/balloon3.c b/board/balloon3/balloon3.c
new file mode 100644
index 0000000..2d6eabe
--- /dev/null
+++ b/board/balloon3/balloon3.c
@@ -0,0 +1,228 @@
+/*
+ * Balloon3 Support
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+#include <serial.h>
+#include <asm/io.h>
+#include <spartan3.h>
+#include <command.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void balloon3_init_fpga(void);
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+int board_init(void)
+{
+ /* arch number of vpac270 */
+ gd->bd->bi_arch_number = MACH_TYPE_BALLOON3;
+
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = 0xa0000100;
+
+ /* Init the FPGA */
+ balloon3_init_fpga();
+
+ return 0;
+}
+
+struct serial_device *default_serial_console(void)
+{
+ return &serial_stuart_device;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
+
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+ gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+ gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
+
+ return 0;
+}
+
+#ifdef CONFIG_CMD_USB
+int usb_board_init(void)
+{
+ writel((readl(UHCHR) | UHCHR_PCPL | UHCHR_PSPL) &
+ ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE),
+ UHCHR);
+
+ writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
+
+ while (readl(UHCHR) & UHCHR_FSBIR)
+ ;
+
+ writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR);
+ writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE);
+
+ /* Clear any OTG Pin Hold */
+ if (readl(PSSR) & PSSR_OTGPH)
+ writel(readl(PSSR) | PSSR_OTGPH, PSSR);
+
+ writel(readl(UHCRHDA) & ~(0x200), UHCRHDA);
+ writel(readl(UHCRHDA) | 0x100, UHCRHDA);
+
+ /* Set port power control mask bits, only 3 ports. */
+ writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB);
+
+ /* enable port 2 */
+ writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS |
+ UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR);
+
+ return 0;
+}
+
+void usb_board_init_fail(void)
+{
+ return;
+}
+
+void usb_board_stop(void)
+{
+ writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
+ udelay(11);
+ writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
+
+ writel(readl(UHCCOMS) | 1, UHCCOMS);
+ udelay(10);
+
+ writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
+
+ return;
+}
+#endif
+
+#if defined(CONFIG_FPGA)
+/* Toggle GPIO103 and GPIO104 -- PROGB and RDnWR */
+int fpga_pgm_fn(int nassert, int nflush, int cookie)
+{
+ if (nassert)
+ writel(0x80, GPCR3);
+ else
+ writel(0x80, GPSR3);
+ if (nflush)
+ writel(0x100, GPCR3);
+ else
+ writel(0x100, GPSR3);
+ return nassert;
+}
+
+/* Check GPIO83 -- INITB */
+int fpga_init_fn(int cookie)
+{
+ return !(readl(GPLR2) & 0x80000);
+}
+
+/* Check GPIO84 -- BUSY */
+int fpga_busy_fn(int cookie)
+{
+ return !(readl(GPLR2) & 0x100000);
+}
+
+/* Check GPIO111 -- DONE */
+int fpga_done_fn(int cookie)
+{
+ return readl(GPLR3) & 0x8000;
+}
+
+/* Configure GPIO104 as GPIO and deassert it */
+int fpga_pre_config_fn(int cookie)
+{
+ writel(readl(GAFR3_L) & ~0x30000, GAFR3_L);
+ writel(0x100, GPCR3);
+ return 0;
+}
+
+/* Configure GPIO104 as nSKTSEL */
+int fpga_post_config_fn(int cookie)
+{
+ writel(readl(GAFR3_L) | 0x10000, GAFR3_L);
+ return 0;
+}
+
+/* Toggle RDnWR */
+int fpga_wr_fn(int nassert_write, int flush, int cookie)
+{
+ udelay(1000);
+
+ if (nassert_write)
+ writel(0x100, GPCR3);
+ else
+ writel(0x100, GPSR3);
+
+ return nassert_write;
+}
+
+/* Write program to the FPGA */
+int fpga_wdata_fn(uchar data, int flush, int cookie)
+{
+ writeb(data, 0x10f00000);
+ return 0;
+}
+
+/* Toggle Clock pin -- NO-OP */
+int fpga_clk_fn(int assert_clk, int flush, int cookie)
+{
+ return assert_clk;
+}
+
+/* Toggle ChipSelect pin -- NO-OP */
+int fpga_cs_fn(int assert_clk, int flush, int cookie)
+{
+ return assert_clk;
+}
+
+Xilinx_Spartan3_Slave_Parallel_fns balloon3_fpga_fns = {
+ fpga_pre_config_fn,
+ fpga_pgm_fn,
+ fpga_init_fn,
+ NULL, /* err */
+ fpga_done_fn,
+ fpga_clk_fn,
+ fpga_cs_fn,
+ fpga_wr_fn,
+ NULL, /* rdata */
+ fpga_wdata_fn,
+ fpga_busy_fn,
+ NULL, /* abort */
+ fpga_post_config_fn,
+};
+
+Xilinx_desc fpga = XILINX_XC3S1000_DESC(slave_parallel,
+ (void *)&balloon3_fpga_fns, 0);
+
+/* Initialize the FPGA */
+void balloon3_init_fpga(void)
+{
+ fpga_init();
+ fpga_add(fpga_xilinx, &fpga);
+}
+#else
+void balloon3_init_fpga(void) {}
+#endif /* CONFIG_FPGA */