summaryrefslogtreecommitdiff
path: root/board/atmel
diff options
context:
space:
mode:
Diffstat (limited to 'board/atmel')
-rw-r--r--board/atmel/atngw100/atngw100.c18
-rw-r--r--board/atmel/atstk1000/Makefile9
-rw-r--r--board/atmel/atstk1000/atstk1000.c15
-rw-r--r--board/atmel/atstk1000/flash.c2
4 files changed, 24 insertions, 20 deletions
diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c
index fa1a2aa..004d8da 100644
--- a/board/atmel/atngw100/atngw100.c
+++ b/board/atmel/atngw100/atngw100.c
@@ -26,6 +26,7 @@
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
#include <asm/arch/hmatrix.h>
+#include <asm/arch/portmux.h>
#include <netdev.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -51,18 +52,18 @@ int board_early_init_f(void)
/* Enable SDRAM in the EBI mux */
hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
- gpio_enable_ebi();
- gpio_enable_usart1();
+ portmux_enable_ebi(16, 23, 0, PORTMUX_DRIVE_HIGH);
+ portmux_enable_usart1(PORTMUX_DRIVE_MIN);
#if defined(CONFIG_MACB)
- gpio_enable_macb0();
- gpio_enable_macb1();
+ portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
+ portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
#endif
#if defined(CONFIG_MMC)
- gpio_enable_mmci();
+ portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW);
#endif
#if defined(CONFIG_ATMEL_SPI)
- gpio_enable_spi0(1 << 0);
+ portmux_enable_spi0(1 << 0, PORTMUX_DRIVE_LOW);
#endif
return 0;
@@ -88,10 +89,11 @@ phys_size_t initdram(int board_type)
return actual_size;
}
-void board_init_info(void)
+int board_early_init_r(void)
{
gd->bd->bi_phy_id[0] = 0x01;
gd->bd->bi_phy_id[1] = 0x03;
+ return 0;
}
#ifdef CONFIG_CMD_NET
@@ -107,7 +109,7 @@ int board_eth_init(bd_t *bi)
#ifdef CONFIG_ATMEL_SPI
#include <spi.h>
-#define ATNGW100_DATAFLASH_CS_PIN GPIO_PIN_PA3
+#define ATNGW100_DATAFLASH_CS_PIN GPIO_PIN_PA(3)
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
diff --git a/board/atmel/atstk1000/Makefile b/board/atmel/atstk1000/Makefile
index 155d46a..f9b26e5 100644
--- a/board/atmel/atstk1000/Makefile
+++ b/board/atmel/atstk1000/Makefile
@@ -24,12 +24,13 @@
include $(TOPDIR)/config.mk
-LIB := $(obj)lib$(BOARD).a
+LIB := $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o flash.o
+COBJS-y += $(BOARD).o
+COBJS-y += flash.o
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
$(LIB): $(obj).depend $(OBJS)
$(AR) $(ARFLAGS) $@ $(OBJS)
diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c
index 94523b5..c36cb57 100644
--- a/board/atmel/atstk1000/atstk1000.c
+++ b/board/atmel/atstk1000/atstk1000.c
@@ -24,8 +24,8 @@
#include <asm/io.h>
#include <asm/sdram.h>
#include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
#include <asm/arch/hmatrix.h>
+#include <asm/arch/portmux.h>
#include <netdev.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -78,14 +78,14 @@ int board_early_init_f(void)
/* Enable SDRAM in the EBI mux */
hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
- gpio_enable_ebi();
- gpio_enable_usart1();
+ portmux_enable_ebi(sdram_config.data_bits, 23, 0, PORTMUX_DRIVE_HIGH);
+ portmux_enable_usart1(PORTMUX_DRIVE_MIN);
#if defined(CONFIG_MACB)
- gpio_enable_macb0();
- gpio_enable_macb1();
+ portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_LOW);
+ portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_LOW);
#endif
#if defined(CONFIG_MMC)
- gpio_enable_mmci();
+ portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW);
#endif
return 0;
@@ -111,10 +111,11 @@ phys_size_t initdram(int board_type)
return actual_size;
}
-void board_init_info(void)
+int board_early_init_r(void)
{
gd->bd->bi_phy_id[0] = 0x10;
gd->bd->bi_phy_id[1] = 0x11;
+ return 0;
}
#ifdef CONFIG_CMD_NET
diff --git a/board/atmel/atstk1000/flash.c b/board/atmel/atstk1000/flash.c
index 4d380f3..0ba06dd 100644
--- a/board/atmel/atstk1000/flash.c
+++ b/board/atmel/atstk1000/flash.c
@@ -22,7 +22,7 @@
#include <common.h>
#ifdef CONFIG_ATSTK1000_EXT_FLASH
-#include <asm/cacheflush.h>
+#include <asm/arch/cacheflush.h>
#include <asm/io.h>
#include <asm/sections.h>