diff options
Diffstat (limited to 'board/atmel')
| -rw-r--r-- | board/atmel/atngw100/atngw100.c | 18 | ||||
| -rw-r--r-- | board/atmel/atstk1000/Makefile | 9 | ||||
| -rw-r--r-- | board/atmel/atstk1000/atstk1000.c | 15 | ||||
| -rw-r--r-- | board/atmel/atstk1000/flash.c | 2 |
4 files changed, 24 insertions, 20 deletions
diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c index fa1a2aa..004d8da 100644 --- a/board/atmel/atngw100/atngw100.c +++ b/board/atmel/atngw100/atngw100.c @@ -26,6 +26,7 @@ #include <asm/arch/clk.h> #include <asm/arch/gpio.h> #include <asm/arch/hmatrix.h> +#include <asm/arch/portmux.h> #include <netdev.h> DECLARE_GLOBAL_DATA_PTR; @@ -51,18 +52,18 @@ int board_early_init_f(void) /* Enable SDRAM in the EBI mux */ hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE)); - gpio_enable_ebi(); - gpio_enable_usart1(); + portmux_enable_ebi(16, 23, 0, PORTMUX_DRIVE_HIGH); + portmux_enable_usart1(PORTMUX_DRIVE_MIN); #if defined(CONFIG_MACB) - gpio_enable_macb0(); - gpio_enable_macb1(); + portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH); + portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH); #endif #if defined(CONFIG_MMC) - gpio_enable_mmci(); + portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW); #endif #if defined(CONFIG_ATMEL_SPI) - gpio_enable_spi0(1 << 0); + portmux_enable_spi0(1 << 0, PORTMUX_DRIVE_LOW); #endif return 0; @@ -88,10 +89,11 @@ phys_size_t initdram(int board_type) return actual_size; } -void board_init_info(void) +int board_early_init_r(void) { gd->bd->bi_phy_id[0] = 0x01; gd->bd->bi_phy_id[1] = 0x03; + return 0; } #ifdef CONFIG_CMD_NET @@ -107,7 +109,7 @@ int board_eth_init(bd_t *bi) #ifdef CONFIG_ATMEL_SPI #include <spi.h> -#define ATNGW100_DATAFLASH_CS_PIN GPIO_PIN_PA3 +#define ATNGW100_DATAFLASH_CS_PIN GPIO_PIN_PA(3) int spi_cs_is_valid(unsigned int bus, unsigned int cs) { diff --git a/board/atmel/atstk1000/Makefile b/board/atmel/atstk1000/Makefile index 155d46a..f9b26e5 100644 --- a/board/atmel/atstk1000/Makefile +++ b/board/atmel/atstk1000/Makefile @@ -24,12 +24,13 @@ include $(TOPDIR)/config.mk -LIB := $(obj)lib$(BOARD).a +LIB := $(obj)lib$(BOARD).a -COBJS := $(BOARD).o flash.o +COBJS-y += $(BOARD).o +COBJS-y += flash.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) $(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c index 94523b5..c36cb57 100644 --- a/board/atmel/atstk1000/atstk1000.c +++ b/board/atmel/atstk1000/atstk1000.c @@ -24,8 +24,8 @@ #include <asm/io.h> #include <asm/sdram.h> #include <asm/arch/clk.h> -#include <asm/arch/gpio.h> #include <asm/arch/hmatrix.h> +#include <asm/arch/portmux.h> #include <netdev.h> DECLARE_GLOBAL_DATA_PTR; @@ -78,14 +78,14 @@ int board_early_init_f(void) /* Enable SDRAM in the EBI mux */ hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE)); - gpio_enable_ebi(); - gpio_enable_usart1(); + portmux_enable_ebi(sdram_config.data_bits, 23, 0, PORTMUX_DRIVE_HIGH); + portmux_enable_usart1(PORTMUX_DRIVE_MIN); #if defined(CONFIG_MACB) - gpio_enable_macb0(); - gpio_enable_macb1(); + portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_LOW); + portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_LOW); #endif #if defined(CONFIG_MMC) - gpio_enable_mmci(); + portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW); #endif return 0; @@ -111,10 +111,11 @@ phys_size_t initdram(int board_type) return actual_size; } -void board_init_info(void) +int board_early_init_r(void) { gd->bd->bi_phy_id[0] = 0x10; gd->bd->bi_phy_id[1] = 0x11; + return 0; } #ifdef CONFIG_CMD_NET diff --git a/board/atmel/atstk1000/flash.c b/board/atmel/atstk1000/flash.c index 4d380f3..0ba06dd 100644 --- a/board/atmel/atstk1000/flash.c +++ b/board/atmel/atstk1000/flash.c @@ -22,7 +22,7 @@ #include <common.h> #ifdef CONFIG_ATSTK1000_EXT_FLASH -#include <asm/cacheflush.h> +#include <asm/arch/cacheflush.h> #include <asm/io.h> #include <asm/sections.h> |