diff options
Diffstat (limited to 'board/atmel')
-rw-r--r-- | board/atmel/at91cap9adk/Makefile | 2 | ||||
-rw-r--r-- | board/atmel/at91cap9adk/at91cap9adk.c | 7 | ||||
-rw-r--r--[-rwxr-xr-x] | board/atmel/at91rm9200dk/Makefile | 2 | ||||
-rw-r--r-- | board/atmel/at91sam9260ek/Makefile | 2 | ||||
-rw-r--r-- | board/atmel/at91sam9260ek/at91sam9260ek.c | 8 | ||||
-rw-r--r-- | board/atmel/at91sam9261ek/Makefile | 2 | ||||
-rw-r--r-- | board/atmel/at91sam9261ek/at91sam9261ek.c | 12 | ||||
-rw-r--r-- | board/atmel/at91sam9263ek/Makefile | 2 | ||||
-rw-r--r-- | board/atmel/at91sam9263ek/at91sam9263ek.c | 11 | ||||
-rw-r--r-- | board/atmel/at91sam9rlek/Makefile | 2 | ||||
-rw-r--r-- | board/atmel/at91sam9rlek/at91sam9rlek.c | 12 | ||||
-rw-r--r-- | board/atmel/atngw100/atngw100.c | 25 |
12 files changed, 61 insertions, 26 deletions
diff --git a/board/atmel/at91cap9adk/Makefile b/board/atmel/at91cap9adk/Makefile index f2b9c12..2d2ff2c 100644 --- a/board/atmel/at91cap9adk/Makefile +++ b/board/atmel/at91cap9adk/Makefile @@ -45,7 +45,7 @@ clean: rm -f $(SOBJS) $(OBJS) distclean: clean - rm -f $(LIB) core *.bak .depend + rm -f $(LIB) core *.bak $(obj).depend ######################################################################### diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c index a3eaf19..c5082a0 100644 --- a/board/atmel/at91cap9adk/at91cap9adk.c +++ b/board/atmel/at91cap9adk/at91cap9adk.c @@ -196,7 +196,7 @@ static void at91cap9_macb_hw_init(void) /* Need to reset PHY -> 500ms reset */ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | - AT91_RSTC_ERSTL | (0x0D << 8) | + (AT91_RSTC_ERSTL & (0x0D << 8)) | AT91_RSTC_URSTEN); at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); @@ -204,6 +204,11 @@ static void at91cap9_macb_hw_init(void) /* Wait for end hardware reset */ while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); + /* Restore NRST value */ + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | + (AT91_RSTC_ERSTL & (0x0 << 8)) | + AT91_RSTC_URSTEN); + /* Re-enable pull-up */ writel(pin_to_mask(AT91_PIN_PB22) | pin_to_mask(AT91_PIN_PB25) | diff --git a/board/atmel/at91rm9200dk/Makefile b/board/atmel/at91rm9200dk/Makefile index 5b4cdcf..2d806d0 100755..100644 --- a/board/atmel/at91rm9200dk/Makefile +++ b/board/atmel/at91rm9200dk/Makefile @@ -38,7 +38,7 @@ clean: rm -f $(SOBJS) $(OBJS) distclean: clean - rm -f $(LIB) core *.bak .depend + rm -f $(LIB) core *.bak $(obj).depend ######################################################################### diff --git a/board/atmel/at91sam9260ek/Makefile b/board/atmel/at91sam9260ek/Makefile index f93540a..7c8a612 100644 --- a/board/atmel/at91sam9260ek/Makefile +++ b/board/atmel/at91sam9260ek/Makefile @@ -45,7 +45,7 @@ clean: rm -f $(SOBJS) $(OBJS) distclean: clean - rm -f $(LIB) core *.bak .depend + rm -f $(LIB) core *.bak $(obj).depend ######################################################################### diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c index ef4d486..836a0c4 100644 --- a/board/atmel/at91sam9260ek/at91sam9260ek.c +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -80,8 +80,8 @@ static void at91sam9260ek_nand_hw_init(void) /* Configure SMC CS3 for NAND/SmartMedia */ at91_sys_write(AT91_SMC_SETUP(3), - AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) | - AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)); + AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | + AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); @@ -149,7 +149,7 @@ static void at91sam9260ek_macb_hw_init(void) /* Need to reset PHY -> 500ms reset */ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | - AT91_RSTC_ERSTL | (0x0D << 8) | + (AT91_RSTC_ERSTL & (0x0D << 8)) | AT91_RSTC_URSTEN); at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); @@ -159,7 +159,7 @@ static void at91sam9260ek_macb_hw_init(void) /* Restore NRST value */ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | - AT91_RSTC_ERSTL | (0x0 << 8) | + (AT91_RSTC_ERSTL & (0x0 << 8)) | AT91_RSTC_URSTEN); /* Re-enable pull-up */ diff --git a/board/atmel/at91sam9261ek/Makefile b/board/atmel/at91sam9261ek/Makefile index 7702a9c..d7b063d 100644 --- a/board/atmel/at91sam9261ek/Makefile +++ b/board/atmel/at91sam9261ek/Makefile @@ -45,7 +45,7 @@ clean: rm -f $(SOBJS) $(OBJS) distclean: clean - rm -f $(LIB) core *.bak .depend + rm -f $(LIB) core *.bak $(obj).depend ######################################################################### diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c index 3de234c..647aab5 100644 --- a/board/atmel/at91sam9261ek/at91sam9261ek.c +++ b/board/atmel/at91sam9261ek/at91sam9261ek.c @@ -82,13 +82,13 @@ static void at91sam9261ek_nand_hw_init(void) /* Configure SMC CS3 for NAND/SmartMedia */ at91_sys_write(AT91_SMC_SETUP(3), - AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) | - AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)); + AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | + AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); at91_sys_write(AT91_SMC_PULSE(3), - AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5) | - AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5)); + AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | + AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); at91_sys_write(AT91_SMC_CYCLE(3), - AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7)); + AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | @@ -97,7 +97,7 @@ static void at91sam9261ek_nand_hw_init(void) #else /* CFG_NAND_DBW_8 */ AT91_SMC_DBW_8 | #endif - AT91_SMC_TDF_(1)); + AT91_SMC_TDF_(2)); at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOC); diff --git a/board/atmel/at91sam9263ek/Makefile b/board/atmel/at91sam9263ek/Makefile index 5adb0bc..00a6b00 100644 --- a/board/atmel/at91sam9263ek/Makefile +++ b/board/atmel/at91sam9263ek/Makefile @@ -45,7 +45,7 @@ clean: rm -f $(SOBJS) $(OBJS) distclean: clean - rm -f $(LIB) core *.bak .depend + rm -f $(LIB) core *.bak $(obj).depend ######################################################################### diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c index ba7fc71..927fc91 100644 --- a/board/atmel/at91sam9263ek/at91sam9263ek.c +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c @@ -83,8 +83,8 @@ static void at91sam9263ek_nand_hw_init(void) /* Configure SMC CS3 for NAND/SmartMedia */ at91_sys_write(AT91_SMC_SETUP(3), - AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) | - AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)); + AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | + AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); @@ -147,7 +147,7 @@ static void at91sam9263ek_macb_hw_init(void) /* Need to reset PHY -> 500ms reset */ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | - AT91_RSTC_ERSTL | (0x0D << 8) | + (AT91_RSTC_ERSTL & (0x0D << 8)) | AT91_RSTC_URSTEN); at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); @@ -155,6 +155,11 @@ static void at91sam9263ek_macb_hw_init(void) /* Wait for end hardware reset */ while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); + /* Restore NRST value */ + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | + (AT91_RSTC_ERSTL & (0x0 << 8)) | + AT91_RSTC_URSTEN); + /* Re-enable pull-up */ writel(pin_to_mask(AT91_PIN_PC25), pin_to_controller(AT91_PIN_PC0) + PIO_PUER); diff --git a/board/atmel/at91sam9rlek/Makefile b/board/atmel/at91sam9rlek/Makefile index a86a926..90029cb 100644 --- a/board/atmel/at91sam9rlek/Makefile +++ b/board/atmel/at91sam9rlek/Makefile @@ -45,7 +45,7 @@ clean: rm -f $(SOBJS) $(OBJS) distclean: clean - rm -f $(LIB) core *.bak .depend + rm -f $(LIB) core *.bak $(obj).depend ######################################################################### diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c index 10423d2..509e7c3 100644 --- a/board/atmel/at91sam9rlek/at91sam9rlek.c +++ b/board/atmel/at91sam9rlek/at91sam9rlek.c @@ -82,13 +82,13 @@ static void at91sam9rlek_nand_hw_init(void) /* Configure SMC CS3 for NAND/SmartMedia */ at91_sys_write(AT91_SMC_SETUP(3), - AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) | - AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)); + AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | + AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); at91_sys_write(AT91_SMC_PULSE(3), - AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5) | - AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5)); + AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | + AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); at91_sys_write(AT91_SMC_CYCLE(3), - AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7)); + AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | @@ -97,7 +97,7 @@ static void at91sam9rlek_nand_hw_init(void) #else /* CFG_NAND_DBW_8 */ AT91_SMC_DBW_8 | #endif - AT91_SMC_TDF_(1)); + AT91_SMC_TDF_(2)); at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_PIOD); diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c index 375f0e7..f2c3e79 100644 --- a/board/atmel/atngw100/atngw100.c +++ b/board/atmel/atngw100/atngw100.c @@ -60,6 +60,9 @@ int board_early_init_f(void) #if defined(CONFIG_MMC) gpio_enable_mmci(); #endif +#if defined(CONFIG_ATMEL_SPI) + gpio_enable_spi0(1 << 0); +#endif return 0; } @@ -89,3 +92,25 @@ void board_init_info(void) gd->bd->bi_phy_id[0] = 0x01; gd->bd->bi_phy_id[1] = 0x03; } + +/* SPI chip select control */ +#ifdef CONFIG_ATMEL_SPI +#include <spi.h> + +#define ATNGW100_DATAFLASH_CS_PIN GPIO_PIN_PA3 + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus == 0 && cs == 0; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + gpio_set_value(ATNGW100_DATAFLASH_CS_PIN, 0); +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + gpio_set_value(ATNGW100_DATAFLASH_CS_PIN, 1); +} +#endif /* CONFIG_ATMEL_SPI */ |