summaryrefslogtreecommitdiff
path: root/board/atmel/at91cap9adk/at91cap9adk.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/atmel/at91cap9adk/at91cap9adk.c')
-rw-r--r--board/atmel/at91cap9adk/at91cap9adk.c283
1 files changed, 283 insertions, 0 deletions
diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c
new file mode 100644
index 0000000..bde6aa9
--- /dev/null
+++ b/board/atmel/at91cap9adk/at91cap9adk.c
@@ -0,0 +1,283 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop <at> leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/AT91CAP9.h>
+
+#define MP_BLOCK_3_BASE 0xFDF00000
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+static void at91cap9_serial_hw_init(void)
+{
+#ifdef CONFIG_USART0
+ AT91C_BASE_PIOA->PIO_PDR = AT91C_PA22_TXD0 | AT91C_PA23_RXD0;
+ AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_US0;
+#endif
+
+#ifdef CONFIG_USART1
+ AT91C_BASE_PIOD->PIO_PDR = AT91C_PD0_TXD1 | AT91C_PD1_RXD1;
+ AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_US1;
+#endif
+
+#ifdef CONFIG_USART2
+ AT91C_BASE_PIOD->PIO_PDR = AT91C_PD2_TXD2 | AT91C_PD3_RXD2;
+ AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_US2;
+#endif
+
+#ifdef CONFIG_USART3 /* DBGU */
+ AT91C_BASE_PIOC->PIO_PDR = AT91C_PC31_DTXD | AT91C_PC30_DRXD;
+ AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SYS;
+#endif
+
+
+}
+
+static void at91cap9_nor_hw_init(void)
+{
+ /* Ensure EBI supply is 3.3V */
+ AT91C_BASE_CCFG->CCFG_EBICSA |= AT91C_EBI_SUP_3V3;
+
+ /* Configure SMC CS0 for parallel flash */
+ AT91C_BASE_SMC->SMC_SETUP0 = AT91C_FLASH_NWE_SETUP |
+ AT91C_FLASH_NCS_WR_SETUP |
+ AT91C_FLASH_NRD_SETUP |
+ AT91C_FLASH_NCS_RD_SETUP;
+
+ AT91C_BASE_SMC->SMC_PULSE0 = AT91C_FLASH_NWE_PULSE |
+ AT91C_FLASH_NCS_WR_PULSE |
+ AT91C_FLASH_NRD_PULSE |
+ AT91C_FLASH_NCS_RD_PULSE;
+
+ AT91C_BASE_SMC->SMC_CYCLE0 = AT91C_FLASH_NWE_CYCLE |
+ AT91C_FLASH_NRD_CYCLE;
+
+ AT91C_BASE_SMC->SMC_CTRL0 = AT91C_SMC_READMODE |
+ AT91C_SMC_WRITEMODE |
+ AT91C_SMC_NWAITM_NWAIT_DISABLE |
+ AT91C_SMC_BAT_BYTE_WRITE |
+ AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS |
+ (AT91C_SMC_TDF & (1 << 16));
+}
+
+#ifdef CONFIG_CMD_NAND
+static void at91cap9_nand_hw_init(void)
+{
+ /* Enable CS3 */
+ AT91C_BASE_CCFG->CCFG_EBICSA |= AT91C_EBI_CS3A_SM | AT91C_EBI_SUP_3V3;
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ AT91C_BASE_SMC->SMC_SETUP3 = AT91C_SM_NWE_SETUP |
+ AT91C_SM_NCS_WR_SETUP |
+ AT91C_SM_NRD_SETUP |
+ AT91C_SM_NCS_RD_SETUP;
+
+ AT91C_BASE_SMC->SMC_PULSE3 = AT91C_SM_NWE_PULSE |
+ AT91C_SM_NCS_WR_PULSE |
+ AT91C_SM_NRD_PULSE |
+ AT91C_SM_NCS_RD_PULSE;
+
+ AT91C_BASE_SMC->SMC_CYCLE3 = AT91C_SM_NWE_CYCLE |
+ AT91C_SM_NRD_CYCLE;
+
+ AT91C_BASE_SMC->SMC_CTRL3 = AT91C_SMC_READMODE |
+ AT91C_SMC_WRITEMODE |
+ AT91C_SMC_NWAITM_NWAIT_DISABLE |
+ AT91C_SMC_DBW_WIDTH_EIGTH_BITS |
+ AT91C_SM_TDF;
+
+ AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_PIOABCD;
+
+ /* RDY/BSY is not connected */
+
+ /* Enable NandFlash */
+ AT91C_BASE_PIOD->PIO_PER = AT91C_PIO_PD15;
+ AT91C_BASE_PIOD->PIO_OER = AT91C_PIO_PD15;
+}
+#endif
+
+#ifdef CONFIG_HAS_DATAFLASH
+static void at91cap9_spi_hw_init(void)
+{
+ AT91C_BASE_PIOD->PIO_BSR = AT91C_PD0_SPI0_NPCS2D |
+ AT91C_PD1_SPI0_NPCS3D;
+ AT91C_BASE_PIOD->PIO_PDR = AT91C_PD0_SPI0_NPCS2D |
+ AT91C_PD1_SPI0_NPCS3D;
+
+ AT91C_BASE_PIOA->PIO_ASR = AT91C_PA28_SPI0_NPCS3A;
+ AT91C_BASE_PIOA->PIO_BSR = AT91C_PA4_SPI0_NPCS2A |
+ AT91C_PA1_SPI0_MOSI |
+ AT91C_PA0_SPI0_MISO |
+ AT91C_PA3_SPI0_NPCS1 |
+ AT91C_PA5_SPI0_NPCS0 |
+ AT91C_PA2_SPI0_SPCK;
+ AT91C_BASE_PIOA->PIO_PDR = AT91C_PA28_SPI0_NPCS3A |
+ AT91C_PA4_SPI0_NPCS2A |
+ AT91C_PA1_SPI0_MOSI |
+ AT91C_PA0_SPI0_MISO |
+ AT91C_PA3_SPI0_NPCS1 |
+ AT91C_PA5_SPI0_NPCS0 |
+ AT91C_PA2_SPI0_SPCK;
+
+ /* Enable Clock */
+ AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SPI0;
+}
+#endif
+
+#ifdef CONFIG_MACB
+static void at91cap9_macb_hw_init(void)
+{
+ unsigned int gpio;
+
+ /* Enable clock */
+ AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_EMAC;
+
+ /*
+ * Disable pull-up on:
+ * RXDV (PB22) => PHY normal mode (not Test mode)
+ * ERX0 (PB25) => PHY ADDR0
+ * ERX1 (PB26) => PHY ADDR1 => PHYADDR = 0x0
+ *
+ * PHY has internal pull-down
+ */
+ AT91C_BASE_PIOB->PIO_PPUDR = AT91C_PB22_E_RXDV |
+ AT91C_PB25_E_RX0 |
+ AT91C_PB26_E_RX1;
+
+ /* Need to reset PHY -> 500ms reset */
+ AT91C_BASE_RSTC->RSTC_RMR = (AT91C_RSTC_KEY & (0xA5 << 24)) |
+ (AT91C_RSTC_ERSTL & (0x0D << 8)) |
+ AT91C_RSTC_URSTEN;
+ AT91C_BASE_RSTC->RSTC_RCR = (AT91C_RSTC_KEY & (0xA5 << 24)) |
+ AT91C_RSTC_EXTRST;
+
+ /* Wait for end hardware reset */
+ while (!(AT91C_BASE_RSTC->RSTC_RSR & AT91C_RSTC_NRSTL));
+
+ /* Re-enable pull-up */
+ AT91C_BASE_PIOB->PIO_PPUER = AT91C_PB22_E_RXDV |
+ AT91C_PB25_E_RX0 |
+ AT91C_PB26_E_RX1;
+
+#ifdef CONFIG_RMII
+ gpio = AT91C_PB30_E_MDIO |
+ AT91C_PB29_E_MDC |
+ AT91C_PB21_E_TXCK |
+ AT91C_PB27_E_RXER |
+ AT91C_PB25_E_RX0 |
+ AT91C_PB22_E_RXDV |
+ AT91C_PB26_E_RX1 |
+ AT91C_PB28_E_TXEN |
+ AT91C_PB23_E_TX0 |
+ AT91C_PB24_E_TX1;
+ AT91C_BASE_PIOB->PIO_ASR = gpio;
+ AT91C_BASE_PIOB->PIO_BSR = 0;
+ AT91C_BASE_PIOB->PIO_PDR = gpio;
+#else
+#error AT91CAP9A-DK works only in RMII mode
+#endif
+
+ /* Unlock EMAC, 3 0 2 1 sequence */
+#define MP_MAC_KEY0 0x5969cb2a
+#define MP_MAC_KEY1 0xb4a1872e
+#define MP_MAC_KEY2 0x05683fbc
+#define MP_MAC_KEY3 0x3634fba4
+#define UNLOCK_MAC 0x00000008
+ *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x3c)) = MP_MAC_KEY3;
+ *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x30)) = MP_MAC_KEY0;
+ *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x38)) = MP_MAC_KEY2;
+ *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x34)) = MP_MAC_KEY1;
+ *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x40)) = UNLOCK_MAC;
+}
+#endif
+
+#ifdef CONFIG_USB_OHCI_NEW
+static void at91cap9_uhp_hw_init(void)
+{
+ /* Unlock USB OHCI, 3 2 0 1 sequence */
+#define MP_OHCI_KEY0 0x896c11ca
+#define MP_OHCI_KEY1 0x68ebca21
+#define MP_OHCI_KEY2 0x4823efbc
+#define MP_OHCI_KEY3 0x8651aae4
+#define UNLOCK_OHCI 0x00000010
+ *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x3c)) = MP_OHCI_KEY3;
+ *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x38)) = MP_OHCI_KEY2;
+ *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x30)) = MP_OHCI_KEY0;
+ *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x34)) = MP_OHCI_KEY1;
+ *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x40)) = UNLOCK_OHCI;
+}
+#endif
+
+int board_init(void)
+{
+ /* Enable Ctrlc */
+ console_init_f();
+
+ /* arch number of AT91CAP9ADK-Board */
+ gd->bd->bi_arch_number = MACH_TYPE_AT91CAP9ADK;
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ at91cap9_serial_hw_init();
+ at91cap9_nor_hw_init();
+#ifdef CONFIG_CMD_NAND
+ at91cap9_nand_hw_init();
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+ at91cap9_spi_hw_init();
+#endif
+#ifdef CONFIG_MACB
+ at91cap9_macb_hw_init();
+#endif
+#ifdef CONFIG_USB_OHCI_NEW
+ at91cap9_uhp_hw_init();
+#endif
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+ return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+#ifdef CONFIG_MACB
+ /*
+ * Initialize ethernet HW addr prior to starting Linux,
+ * needed for nfsroot
+ */
+ eth_init(gd->bd);
+#endif
+}
+#endif