1 files changed, 168 insertions, 0 deletions
diff --git a/board/armadeus/apf27/lowlevel_init.S b/board/armadeus/apf27/lowlevel_init.S
new file mode 100644
index 0000000..4293cb1
--- /dev/null
+++ b/board/armadeus/apf27/lowlevel_init.S
@@ -0,0 +1,168 @@
+/*
+ * (C) Copyright 2013 Philippe Reynes <tremyfr@yahoo.fr>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <config.h>
+#include <generated/asm-offsets.h>
+#include <version.h>
+#include <asm/macro.h>
+#include <asm/arch/imx-regs.h>
+#include "apf27.h"
+
+	.macro init_aipi
+	/*
+	 * setup AIPI1 and AIPI2
+	 */
+	write32 AIPI1_PSR0, ACFG_AIPI1_PSR0_VAL
+	write32 AIPI1_PSR1, ACFG_AIPI1_PSR1_VAL
+	write32 AIPI2_PSR0, ACFG_AIPI2_PSR0_VAL
+	write32 AIPI2_PSR1, ACFG_AIPI2_PSR1_VAL
+
+	/* Change SDRAM signal strengh */
+	ldr r0, =GPCR
+	ldr r1, =ACFG_GPCR_VAL
+	ldr r5, [r0]
+	orr r5, r5, r1
+	str r5, [r0]
+
+	.endm /* init_aipi */
+
+	.macro init_clock
+	ldr r0, =CSCR
+	/* disable MPLL/SPLL first */
+	ldr r1, [r0]
+	bic r1, r1, #(CSCR_MPEN|CSCR_SPEN)
+	str r1, [r0]
+
+ 	/*
+	 * pll clock initialization predefined in apf27.h
+	 */
+	write32 MPCTL0, ACFG_MPCTL0_VAL
+	write32 SPCTL0, ACFG_SPCTL0_VAL
+
+	write32 CSCR, ACFG_CSCR_VAL|CSCR_MPLL_RESTART|CSCR_SPLL_RESTART
+
+	/*
+	 * add some delay here
+	 */
+	mov r1, #0x1000
+	1:  subs r1, r1, #0x1
+	bne 1b
+
+	/* peripheral clock divider */
+	write32 PCDR0, ACFG_PCDR0_VAL
+	write32 PCDR1, ACFG_PCDR1_VAL
+
+	/* Configure PCCR0 and PCCR1 */
+	write32 PCCR0, ACFG_PCCR0_VAL
+	write32 PCCR1, ACFG_PCCR1_VAL
+
+	.endm /* init_clock */
+
+	.macro init_ddr
+	/* wait for SDRAM/LPDDR ready (SDRAMRDY) */
+	ldr		r0, =IMX_ESD_BASE
+	ldr		r4, =ESDMISC_SDRAM_RDY
+2:	ldr		r1, [r0, #ESDMISC_ROF]
+	ands		r1, r1, r4
+	bpl		2b
+
+	/* LPDDR Soft Reset Mobile/Low Power DDR SDRAM. */
+	ldr		r0, =IMX_ESD_BASE
+	ldr		r4, =ACFG_ESDMISC_VAL
+	orr		r1, r4, #ESDMISC_MDDR_DL_RST
+	str		r1, [r0, #ESDMISC_ROF]
+
+	/* Hold for more than 200ns */
+	ldr		r1, =0x10000
+1:	subs		r1, r1, #0x1
+	bne		1b
+
+	str		r4, [r0]
+
+	ldr		r0, =IMX_ESD_BASE
+	ldr		r1, =ACFG_SDRAM_ESDCFG_REGISTER_VAL
+	str		r1, [r0, #ESDCFG0_ROF]
+
+	ldr		r0, =IMX_ESD_BASE
+	ldr		r1, =ACFG_PRECHARGE_CMD
+	str		r1, [r0, #ESDCTL0_ROF]
+
+	/* write8(0xA0001000, any value) */
+	ldr		r1, =PHYS_SDRAM_1+ACFG_SDRAM_PRECHARGE_ALL_VAL
+	strb		r2, [r1]
+
+	ldr		r1, =ACFG_AUTOREFRESH_CMD
+	str		r1, [r0, #ESDCTL0_ROF]
+
+	ldr 		r4, =PHYS_SDRAM_1	/* CSD0 base address	*/
+
+	ldr 		r6,=0x7		/* load loop counter	*/
+1:	str 		r5,[r4]		/* run auto-refresh cycle to array 0 */
+	subs 		r6,r6,#1
+	bne 1b
+
+	ldr		r1, =ACFG_SET_MODE_REG_CMD
+	str		r1, [r0, #ESDCTL0_ROF]
+
+	/* set standard mode register */
+	ldr		r4, = PHYS_SDRAM_1+ACFG_SDRAM_MODE_REGISTER_VAL
+	strb		r2, [r4]
+
+	/* set extended mode register */
+	ldr		r4, =PHYS_SDRAM_1+ACFG_SDRAM_EXT_MODE_REGISTER_VAL
+	strb		r5, [r4]
+
+	ldr		r1, =ACFG_NORMAL_RW_CMD
+	str		r1, [r0, #ESDCTL0_ROF]
+
+	/* 2nd sdram */
+	ldr		r0, =IMX_ESD_BASE
+	ldr		r1, =ACFG_SDRAM_ESDCFG_REGISTER_VAL
+	str		r1, [r0, #ESDCFG1_ROF]
+
+	ldr		r0, =IMX_ESD_BASE
+	ldr		r1, =ACFG_PRECHARGE_CMD
+	str		r1, [r0, #ESDCTL1_ROF]
+
+	/* write8(0xB0001000, any value) */
+	ldr		r1, =PHYS_SDRAM_2+ACFG_SDRAM_PRECHARGE_ALL_VAL
+	strb		r2, [r1]
+
+	ldr		r1, =ACFG_AUTOREFRESH_CMD
+	str		r1, [r0, #ESDCTL1_ROF]
+
+	ldr 		r4, =PHYS_SDRAM_2	/* CSD1 base address */
+
+	ldr 		r6,=0x7		/* load loop counter */
+1:	str 		r5,[r4]		/* run auto-refresh cycle to array 0 */
+	subs 		r6,r6,#1
+	bne 1b
+
+	ldr		r1, =ACFG_SET_MODE_REG_CMD
+	str		r1, [r0, #ESDCTL1_ROF]
+
+	/* set standard mode register */
+	ldr		r4, =PHYS_SDRAM_2+ACFG_SDRAM_MODE_REGISTER_VAL
+	strb		r2, [r4]
+
+	/* set extended mode register */
+	ldr		r4, =PHYS_SDRAM_2+ACFG_SDRAM_EXT_MODE_REGISTER_VAL
+	strb		r2, [r4]
+
+	ldr		r1, =ACFG_NORMAL_RW_CMD
+	str		r1, [r0, #ESDCTL1_ROF]
+	.endm /* init_ddr */
+
+.globl lowlevel_init
+lowlevel_init:
+
+	init_aipi
+	init_clock
+#ifdef CONFIG_SPL_BUILD
+	init_ddr
+#endif
+
+	mov	pc, lr