summaryrefslogtreecommitdiff
path: root/board/amcc
diff options
context:
space:
mode:
Diffstat (limited to 'board/amcc')
-rw-r--r--board/amcc/ebony/init.S77
-rw-r--r--board/amcc/katmai/init.S10
-rw-r--r--board/amcc/luan/init.S170
-rw-r--r--board/amcc/luan/luan.c99
-rw-r--r--board/amcc/luan/u-boot.lds13
-rw-r--r--board/amcc/ocotea/init.S82
-rw-r--r--board/amcc/sequoia/sdram.c21
-rw-r--r--board/amcc/sequoia/sequoia.c4
-rw-r--r--board/amcc/yucca/init.S83
-rw-r--r--board/amcc/yucca/yucca.c316
10 files changed, 149 insertions, 726 deletions
diff --git a/board/amcc/ebony/init.S b/board/amcc/ebony/init.S
index cc8f8b4..c86076e 100644
--- a/board/amcc/ebony/init.S
+++ b/board/amcc/ebony/init.S
@@ -22,53 +22,7 @@
#include <ppc_asm.tmpl>
#include <config.h>
-
-/* General */
-#define TLB_VALID 0x00000200
-
-/* Supported page sizes */
-
-#define SZ_1K 0x00000000
-#define SZ_4K 0x00000010
-#define SZ_16K 0x00000020
-#define SZ_64K 0x00000030
-#define SZ_256K 0x00000040
-#define SZ_1M 0x00000050
-#define SZ_16M 0x00000070
-#define SZ_256M 0x00000090
-
-/* Storage attributes */
-#define SA_W 0x00000800 /* Write-through */
-#define SA_I 0x00000400 /* Caching inhibited */
-#define SA_M 0x00000200 /* Memory coherence */
-#define SA_G 0x00000100 /* Guarded */
-#define SA_E 0x00000080 /* Endian */
-
-/* Access control */
-#define AC_X 0x00000024 /* Execute */
-#define AC_W 0x00000012 /* Write */
-#define AC_R 0x00000009 /* Read */
-
-/* Some handy macros */
-
-#define EPN(e) ((e) & 0xfffffc00)
-#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a) ( (a)&0x00000fbf )
-
-#define tlbtab_start\
- mflr r1 ;\
- bl 0f ;
-
-#define tlbtab_end\
- .long 0, 0, 0 ; \
-0: mflr r0 ; \
- mtlr r1 ; \
- blr ;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
- .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
+#include <asm-ppc/mmu.h>
/**************************************************************************
* TLB TABLE
@@ -81,16 +35,23 @@
*
*************************************************************************/
- .section .bootpg,"ax"
- .globl tlbtab
+ .section .bootpg,"ax"
+ .globl tlbtab
tlbtab:
- tlbtab_start
- tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
- tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
- tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X )
- tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
- tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
- tlbtab_end
+ tlbtab_start
+
+ tlbentry(0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+ /*
+ * TLB entries for SDRAM are not needed on this platform.
+ * They are dynamically generated in the SPD DDR(2) detection
+ * routine.
+ */
+
+ tlbentry(CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X)
+ tlbentry(CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X)
+ tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I)
+ tlbtab_end
diff --git a/board/amcc/katmai/init.S b/board/amcc/katmai/init.S
index f5900bc..6b024ee 100644
--- a/board/amcc/katmai/init.S
+++ b/board/amcc/katmai/init.S
@@ -46,6 +46,11 @@
.globl tlbtabA
tlbtabA:
tlbtab_start
+
+ /*
+ * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+ * speed up boot process. It is patched after relocation to enable SA_I
+ */
tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G)
/*
@@ -81,6 +86,11 @@ tlbtabA:
.globl tlbtabB
tlbtabB:
tlbtab_start
+
+ /*
+ * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+ * speed up boot process. It is patched after relocation to enable SA_I
+ */
tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G)
/*
diff --git a/board/amcc/luan/init.S b/board/amcc/luan/init.S
index 7830ebd..d5ee117 100644
--- a/board/amcc/luan/init.S
+++ b/board/amcc/luan/init.S
@@ -1,73 +1,31 @@
/*
-*
-* See file CREDITS for list of people who contributed to this
-* project.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation; either version 2 of
-* the License, or (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-* MA 02111-1307 USA
-*/
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
#include <ppc_asm.tmpl>
#include <config.h>
-
-/* General */
-#define TLB_VALID 0x00000200
-
-/* Supported page sizes */
-
-#define SZ_1K 0x00000000
-#define SZ_4K 0x00000010
-#define SZ_16K 0x00000020
-#define SZ_64K 0x00000030
-#define SZ_256K 0x00000040
-#define SZ_1M 0x00000050
-#define SZ_16M 0x00000070
-#define SZ_256M 0x00000090
-
-/* Storage attributes */
-#define SA_W 0x00000800 /* Write-through */
-#define SA_I 0x00000400 /* Caching inhibited */
-#define SA_M 0x00000200 /* Memory coherence */
-#define SA_G 0x00000100 /* Guarded */
-#define SA_E 0x00000080 /* Endian */
-
-/* Access control */
-#define AC_X 0x00000024 /* Execute */
-#define AC_W 0x00000012 /* Write */
-#define AC_R 0x00000009 /* Read */
-
-/* Some handy macros */
-
-#define EPN(e) ((e) & 0xfffffc00)
-#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a) ( (a)&0x00000fbf )
-
-#define tlbtab_start\
- mflr r1 ;\
- bl 0f ;
-
-#define tlbtab_end\
- .long 0, 0, 0 ; \
-0: mflr r0 ; \
- mtlr r1 ; \
- blr ;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
- .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
+#include <asm-ppc/mmu.h>
/**************************************************************************
* TLB TABLE
@@ -80,53 +38,37 @@
*
*************************************************************************/
- .section .bootpg,"ax"
- .globl tlbtab
+ .section .bootpg,"ax"
+ .globl tlbtab
tlbtab:
- tlbtab_start
-
-#if (CFG_LARGE_FLASH == 0xffc00000) /* if booting from large flash */
- /* large flash */
- tlbentry( 0xffc00000, SZ_1M, 0xffc00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I|SA_W )
- tlbentry( 0xffd00000, SZ_1M, 0xffd00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I|SA_W )
- tlbentry( 0xffe00000, SZ_1M, 0xffe00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I|SA_W )
- tlbentry( 0xfff00000, SZ_1M, 0xfff00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I|SA_W )
-
- tlbentry( 0xff800000, SZ_1M, 0xff800000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
- tlbentry( 0xff900000, SZ_1M, 0xff900000, 1, AC_R|AC_W|AC_X|SA_G|SA_I|SA_W )
-#else /* else booting from small flash */
- tlbentry( 0xffe00000, SZ_1M, 0xffe00000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
- tlbentry( 0xfff00000, SZ_1M, 0xfff00000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
-
- tlbentry( 0xff800000, SZ_1M, 0xff800000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
- tlbentry( 0xff900000, SZ_1M, 0xff900000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
- tlbentry( 0xffa00000, SZ_1M, 0xffa00000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
- tlbentry( 0xffb00000, SZ_1M, 0xffb00000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
-#endif
-
- tlbentry( CFG_EPLD_BASE, SZ_256K, 0xff000000, 1, AC_R|AC_W|SA_G|SA_I )
-
-#if (CFG_SRAM_BASE != 0) /* if SRAM up high and SDRAM at zero */
- tlbentry( 0x00000000, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
- tlbentry( 0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-#elif (CFG_SMALL_FLASH == 0xff900000) /* else SRAM at 0 */
- tlbentry( 0x00000000, SZ_1M, 0xff800000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
-#elif (CFG_SMALL_FLASH == 0xfff00000)
- tlbentry( 0x00000000, SZ_1M, 0xffe00000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
-#else
- #error DONT KNOW SRAM LOCATION
-#endif
-
- /* internal ram (l2 cache) */
- tlbentry( CFG_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_I )
-
- /* peripherals at f0000000 */
- tlbentry( CFG_PERIPHERAL_BASE, SZ_4K, CFG_PERIPHERAL_BASE, 1, AC_R|AC_W|SA_G|SA_I )
-
- /* PCI */
-#if (CONFIG_COMMANDS & CFG_CMD_PCI)
- tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 9, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 9, AC_R|AC_W|SA_G|SA_I )
-#endif
- tlbtab_end
+ tlbtab_start
+
+ /*
+ * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+ * speed up boot process. It is patched after relocation to enable SA_I
+ */
+ tlbentry(0xfff00000, SZ_1M, 0xfff00000, 1, AC_R|AC_W|AC_X|SA_G)
+
+ tlbentry(0xffc00000, SZ_1M, 0xffc00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry(0xffd00000, SZ_1M, 0xffd00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry(0xffe00000, SZ_1M, 0xffe00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry(0xff900000, SZ_1M, 0xff900000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry(CFG_EPLD_BASE, SZ_256K, 0xff000000, 1, AC_R|AC_W|SA_G|SA_I)
+
+ /*
+ * TLB entries for SDRAM are not needed on this platform.
+ * They are dynamically generated in the SPD DDR(2) detection
+ * routine.
+ */
+
+ /* internal ram (l2 cache) */
+ tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_I)
+
+ /* peripherals at f0000000 */
+ tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, CFG_PERIPHERAL_BASE, 1, AC_R|AC_W|SA_G|SA_I)
+
+ /* PCI */
+ tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 9, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 9, AC_R|AC_W|SA_G|SA_I)
+ tlbtab_end
diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c
index 06a57f6..778aafc 100644
--- a/board/amcc/luan/luan.c
+++ b/board/amcc/luan/luan.c
@@ -106,105 +106,6 @@ int checkboard(void)
/*************************************************************************
- * long int fixed_sdram()
- *
- ************************************************************************/
-static long int fixed_sdram(void)
-{ /* DDR2 init from BDI2000 script */
- mtdcr( 0x10, 0x00000021 ); /* MCIF0_MCOPT2 - zero DCEN bit */
- mtdcr( 0x11, 0x84000000 );
- mtdcr( 0x10, 0x00000020 ); /* MCIF0_MCOPT1 - no ECC, 64 bits, 4 banks, DDR2 */
- mtdcr( 0x11, 0x2D122000 );
- mtdcr( 0x10, 0x00000026 ); /* MCIF0_CODT - die termination on */
- mtdcr( 0x11, 0x00800026 );
- mtdcr( 0x10, 0x00000081 ); /* MCIF0_WRDTR - Write DQS Adv 90 + Fractional DQS Delay */
- mtdcr( 0x11, 0x82000800 );
- mtdcr( 0x10, 0x00000080 ); /* MCIF0_CLKTR - advance addr clock by 180 deg */
- mtdcr( 0x11, 0x80000000 );
- mtdcr( 0x10, 0x00000040 ); /* MCIF0_MB0CF - turn on CS0, N x 10 coll */
- mtdcr( 0x11, 0x00000201 );
- mtdcr( 0x10, 0x00000044 ); /* MCIF0_MB1CF - turn on CS0, N x 10 coll */
- mtdcr( 0x11, 0x00000201 );
- mtdcr( 0x10, 0x00000030 ); /* MCIF0_RTR - refresh every 7.8125uS */
- mtdcr( 0x11, 0x08200000 );
- mtdcr( 0x10, 0x00000085 ); /* MCIF0_SDTR1 - timing register 1 */
- mtdcr( 0x11, 0x80201000 );
- mtdcr( 0x10, 0x00000086 ); /* MCIF0_SDTR2 - timing register 2 */
- mtdcr( 0x11, 0x42103242 );
- mtdcr( 0x10, 0x00000087 ); /* MCIF0_SDTR3 - timing register 3 */
- mtdcr( 0x11, 0x0C100D14 );
- mtdcr( 0x10, 0x00000088 ); /* MCIF0_MMODE - CAS is 4 cycles */
- mtdcr( 0x11, 0x00000642 );
- mtdcr( 0x10, 0x00000089 ); /* MCIF0_MEMODE - diff DQS disabled */
- mtdcr( 0x11, 0x00000400 ); /* ODT term disabled */
-
- mtdcr( 0x10, 0x00000050 ); /* MCIF0_INITPLR0 - NOP */
- mtdcr( 0x11, 0x81b80000 );
- mtdcr( 0x10, 0x00000051 ); /* MCIF0_INITPLR1 - PRE */
- mtdcr( 0x11, 0x82100400 );
- mtdcr( 0x10, 0x00000052 ); /* MCIF0_INITPLR2 - EMR2 */
- mtdcr( 0x11, 0x80820000 );
- mtdcr( 0x10, 0x00000053 ); /* MCIF0_INITPLR3 - EMR3 */
- mtdcr( 0x11, 0x80830000 );
- mtdcr( 0x10, 0x00000054 ); /* MCIF0_INITPLR4 - EMR DLL ENABLE */
- mtdcr( 0x11, 0x80810000 );
- mtdcr( 0x10, 0x00000055 ); /* MCIF0_INITPLR5 - MR DLL RESET */
- mtdcr( 0x11, 0x80800542 );
- mtdcr( 0x10, 0x00000056 ); /* MCIF0_INITPLR6 - PRE */
- mtdcr( 0x11, 0x82100400 );
- mtdcr( 0x10, 0x00000057 ); /* MCIF0_INITPLR7 - refresh */
- mtdcr( 0x11, 0x99080000 );
- mtdcr( 0x10, 0x00000058 ); /* MCIF0_INITPLR8 */
- mtdcr( 0x11, 0x99080000 );
- mtdcr( 0x10, 0x00000059 ); /* MCIF0_INITPLR9 */
- mtdcr( 0x11, 0x99080000 );
- mtdcr( 0x10, 0x0000005A ); /* MCIF0_INITPLR10 */
- mtdcr( 0x11, 0x99080000 );
- mtdcr( 0x10, 0x0000005B ); /* MCIF0_INITPLR11 - MR */
- mtdcr( 0x11, 0x80800442 );
- mtdcr( 0x10, 0x0000005C ); /* MCIF0_INITPLR12 - EMR OCD Default */
- mtdcr( 0x11, 0x80810380 );
- mtdcr( 0x10, 0x0000005D ); /* MCIF0_INITPLR13 - EMR OCD exit */
- mtdcr( 0x11, 0x80810000 );
- udelay( 10*1000 );
-
- mtdcr( 0x10, 0x00000021 ); /* MCIF0_MCOPT2 - execute preloaded init */
- mtdcr( 0x11, 0x28000000 ); /* set DC_EN */
- udelay( 100*1000 );
-
- mtdcr( 0x40, 0x0000F800 ); /* MQ0_B0BAS: base addr 00000000 / 256MB */
- mtdcr( 0x41, 0x1000F800 ); /* MQ0_B1BAS: base addr 10000000 / 256MB */
-
- mtdcr( 0x10, 0x00000078 ); /* MCIF0_RDCC - auto set read stage */
- mtdcr( 0x11, 0x00000000 );
- mtdcr( 0x10, 0x00000070 ); /* MCIF0_RQDC - read DQS delay control */
- mtdcr( 0x11, 0x8000003A ); /* enabled, frac DQS delay */
- mtdcr( 0x10, 0x00000074 ); /* MCIF0_RFDC - two clock feedback delay */
- mtdcr( 0x11, 0x00000200 );
-
- return 512 << 20;
-}
-
-
-/*************************************************************************
- * long int initdram
- *
- ************************************************************************/
-long int initdram( int board_type )
-{
- long dram_size = 0;
-
-#if defined(CONFIG_SPD_EEPROM)
- dram_size = spd_sdram (0);
-#else
- dram_size = fixed_sdram ();
-#endif
-
- return dram_size;
-}
-
-
-/*************************************************************************
* int testdram()
*
************************************************************************/
diff --git a/board/amcc/luan/u-boot.lds b/board/amcc/luan/u-boot.lds
index d122f49..72ce685 100644
--- a/board/amcc/luan/u-boot.lds
+++ b/board/amcc/luan/u-boot.lds
@@ -68,19 +68,6 @@ SECTIONS
cpu/ppc4xx/start.o (.text)
board/amcc/luan/init.o (.text)
- cpu/ppc4xx/kgdb.o (.text)
- cpu/ppc4xx/traps.o (.text)
- cpu/ppc4xx/interrupts.o (.text)
- cpu/ppc4xx/serial.o (.text)
- cpu/ppc4xx/cpu_init.o (.text)
- cpu/ppc4xx/speed.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
- lib_generic/zlib.o (.text)
-
-/* . = env_offset;*/
-/* common/environment.o(.text)*/
*(.text)
*(.fixup)
diff --git a/board/amcc/ocotea/init.S b/board/amcc/ocotea/init.S
index 7e0b132..d211c71 100644
--- a/board/amcc/ocotea/init.S
+++ b/board/amcc/ocotea/init.S
@@ -22,55 +22,7 @@
#include <ppc_asm.tmpl>
#include <config.h>
-
-/* General */
-#define TLB_VALID 0x00000200
-#define _256M 0x10000000
-
-/* Supported page sizes */
-
-#define SZ_1K 0x00000000
-#define SZ_4K 0x00000010
-#define SZ_16K 0x00000020
-#define SZ_64K 0x00000030
-#define SZ_256K 0x00000040
-#define SZ_1M 0x00000050
-#define SZ_8M 0x00000060
-#define SZ_16M 0x00000070
-#define SZ_256M 0x00000090
-
-/* Storage attributes */
-#define SA_W 0x00000800 /* Write-through */
-#define SA_I 0x00000400 /* Caching inhibited */
-#define SA_M 0x00000200 /* Memory coherence */
-#define SA_G 0x00000100 /* Guarded */
-#define SA_E 0x00000080 /* Endian */
-
-/* Access control */
-#define AC_X 0x00000024 /* Execute */
-#define AC_W 0x00000012 /* Write */
-#define AC_R 0x00000009 /* Read */
-
-/* Some handy macros */
-
-#define EPN(e) ((e) & 0xfffffc00)
-#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a) ( (a)&0x00000fbf )
-
-#define tlbtab_start\
- mflr r1 ;\
- bl 0f ;
-
-#define tlbtab_end\
- .long 0, 0, 0 ; \
-0: mflr r0 ; \
- mtlr r1 ; \
- blr ;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
- .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
+#include <asm-ppc/mmu.h>
/**************************************************************************
* TLB TABLE
@@ -83,19 +35,23 @@
*
*************************************************************************/
- .section .bootpg,"ax"
- .globl tlbtab
+ .section .bootpg,"ax"
+ .globl tlbtab
tlbtab:
- tlbtab_start
- tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
- tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
- tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X )
- tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
- tlbentry( CFG_SDRAM_BASE + 0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
- tlbentry( CFG_SDRAM_BASE + 0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
- tlbentry( CFG_SDRAM_BASE + 0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
- tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
- tlbtab_end
+ tlbtab_start
+
+ tlbentry(0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+ /*
+ * TLB entries for SDRAM are not needed on this platform.
+ * They are dynamically generated in the SPD DDR(2) detection
+ * routine.
+ */
+
+ tlbentry(CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X)
+ tlbentry(CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X)
+ tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I)
+ tlbtab_end
diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c
index 77f1438..f8b837e 100644
--- a/board/amcc/sequoia/sdram.c
+++ b/board/amcc/sequoia/sdram.c
@@ -6,7 +6,7 @@
* Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
* Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
*
- * (C) Copyright 2006
+ * (C) Copyright 2006-2007
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* This program is free software; you can redistribute it and/or
@@ -379,16 +379,18 @@ void denali_core_search_data_eye(unsigned long memory_size)
long int initdram (int board_type)
{
#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+ ulong speed = get_bus_freq(0);
+
mtsdram(DDR0_02, 0x00000000);
mtsdram(DDR0_00, 0x0000190A);
mtsdram(DDR0_01, 0x01000000);
mtsdram(DDR0_03, 0x02030602);
- mtsdram(DDR0_04, 0x13030300);
- mtsdram(DDR0_05, 0x0202050E);
- mtsdram(DDR0_06, 0x0104C823);
+ mtsdram(DDR0_04, 0x0A020200);
+ mtsdram(DDR0_05, 0x02020308);
+ mtsdram(DDR0_06, 0x0102C812);
mtsdram(DDR0_07, 0x000D0100);
- mtsdram(DDR0_08, 0x02360001);
+ mtsdram(DDR0_08, 0x02430001);
mtsdram(DDR0_09, 0x00011D5F);
mtsdram(DDR0_10, 0x00000300);
mtsdram(DDR0_11, 0x0027C800);
@@ -402,13 +404,16 @@ long int initdram (int board_type)
mtsdram(DDR0_22, 0x00267F0B);
mtsdram(DDR0_23, 0x00000000);
mtsdram(DDR0_24, 0x01010002);
- mtsdram(DDR0_26, 0x5B260181);
+ if (speed > 133333333)
+ mtsdram(DDR0_26, 0x5B26050C);
+ else
+ mtsdram(DDR0_26, 0x5B260408);
mtsdram(DDR0_27, 0x0000682B);
mtsdram(DDR0_28, 0x00000000);
mtsdram(DDR0_31, 0x00000000);
mtsdram(DDR0_42, 0x01000006);
- mtsdram(DDR0_43, 0x050A0200);
- mtsdram(DDR0_44, 0x00000005);
+ mtsdram(DDR0_43, 0x030A0200);
+ mtsdram(DDR0_44, 0x00000003);
mtsdram(DDR0_02, 0x00000001);
wait_for_dlllock();
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
index b2b82c7..daaffe0 100644
--- a/board/amcc/sequoia/sequoia.c
+++ b/board/amcc/sequoia/sequoia.c
@@ -336,6 +336,10 @@ int misc_init_r(void)
}
#endif /* CONFIG_440EPX */
+ mfsdr(SDR0_SRST1, reg); /* enable security/kasumi engines */
+ reg &= ~(SDR0_SRST1_CRYP0 | SDR0_SRST1_KASU0);
+ mtsdr(SDR0_SRST1, reg);
+
/*
* Clear PLB4A0_ACR[WRP]
* This fix will make the MAL burst disabling patch for the Linux
diff --git a/board/amcc/yucca/init.S b/board/amcc/yucca/init.S
index c9eca68..c92dcf7 100644
--- a/board/amcc/yucca/init.S
+++ b/board/amcc/yucca/init.S
@@ -1,4 +1,7 @@
/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
* Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
*
* See file CREDITS for list of people who contributed to this
@@ -19,56 +22,10 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
-/* port to AMCC 440SPE evaluatioon board - SG April 12,2005 */
#include <ppc_asm.tmpl>
#include <config.h>
-
-/* General */
-#define TLB_VALID 0x00000200
-
-/* Supported page sizes */
-
-#define SZ_1K 0x00000000
-#define SZ_4K 0x00000010
-#define SZ_16K 0x00000020
-#define SZ_64K 0x00000030
-#define SZ_256K 0x00000040
-#define SZ_1M 0x00000050
-#define SZ_16M 0x00000070
-#define SZ_256M 0x00000090
-
-/* Storage attributes */
-#define SA_W 0x00000800 /* Write-through */
-#define SA_I 0x00000400 /* Caching inhibited */
-#define SA_M 0x00000200 /* Memory coherence */
-#define SA_G 0x00000100 /* Guarded */
-#define SA_E 0x00000080 /* Endian */
-
-/* Access control */
-#define AC_X 0x00000024 /* Execute */
-#define AC_W 0x00000012 /* Write */
-#define AC_R 0x00000009 /* Read */
-
-/* Some handy macros */
-
-#define EPN(e) ((e) & 0xfffffc00)
-#define TLB0(epn,sz) ((EPN((epn)) | (sz) | TLB_VALID ))
-#define TLB1(rpn,erpn) (((rpn) & 0xfffffc00) | (erpn))
-#define TLB2(a) ((a) & 0x00000fbf)
-
-#define tlbtab_start\
- mflr r1 ;\
- bl 0f ;
-
-#define tlbtab_end\
- .long 0, 0, 0 ;\
-0: mflr r0 ;\
- mtlr r1 ;\
- blr ;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
- .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+#include <asm-ppc/mmu.h>
/**************************************************************************
* TLB TABLE
@@ -89,12 +46,18 @@
.globl tlbtabA
tlbtabA:
tlbtab_start
- tlbentry(0xfff00000, SZ_16M, 0xfff00000, 4, AC_R|AC_W|AC_X|SA_G)
- tlbentry(CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry(CFG_SDRAM_BASE + 0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry(CFG_SDRAM_BASE + 0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry(CFG_SDRAM_BASE + 0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+ /*
+ * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+ * speed up boot process. It is patched after relocation to enable SA_I
+ */
+ tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G)
+
+ /*
+ * TLB entries for SDRAM are not needed on this platform.
+ * They are dynamically generated in the SPD DDR(2) detection
+ * routine.
+ */
tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
tlbentry(CFG_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I)
@@ -126,12 +89,18 @@ tlbtabA:
.globl tlbtabB
tlbtabB:
tlbtab_start
- tlbentry(0xfff00000, SZ_16M, 0xfff00000, 4, AC_R|AC_W|AC_X|SA_G)
- tlbentry(CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry(CFG_SDRAM_BASE + 0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry(CFG_SDRAM_BASE + 0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry(CFG_SDRAM_BASE + 0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+ /*
+ * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+ * speed up boot process. It is patched after relocation to enable SA_I
+ */
+ tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G)
+
+ /*
+ * TLB entries for SDRAM are not needed on this platform.
+ * They are dynamically generated in the SPD DDR(2) detection
+ * routine.
+ */
tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
tlbentry(CFG_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I)
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index e9b34dd..90eaab1 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -44,8 +44,6 @@ int compare_to_true(char *str );
char *remove_l_w_space(char *in_str );
char *remove_t_w_space(char *in_str );
int get_console_port(void);
-unsigned long ppcMfcpr(unsigned long cpr_reg);
-unsigned long ppcMfsdr(unsigned long sdr_reg);
int ppc440spe_init_pcie_rootport(int port);
void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
@@ -221,7 +219,7 @@ int board_early_init_f (void)
|
+-------------------------------------------------------------------*/
/* Read Pin Strap Register in PPC440SP */
- sdr0_pinstp = ppcMfsdr(SDR0_PINSTP);
+ mfsdr(SDR0_PINSTP, sdr0_pinstp);
bootstrap_settings = sdr0_pinstp & SDR0_PINSTP_BOOTSTRAP_MASK;
switch (bootstrap_settings) {
@@ -246,7 +244,7 @@ int board_early_init_f (void)
* Boot Settings in IIC EEprom address 0x50 or 0x54
* Read Serial Device Strap Register1 in PPC440SPe
*/
- sdr0_sdstp1 = ppcMfsdr(SDR0_SDSTP1);
+ mfsdr(SDR0_SDSTP1, sdr0_sdstp1);
boot_selection = sdr0_sdstp1 & SDR0_SDSTP1_ERPN_MASK;
ebc_data_width = sdr0_sdstp1 & SDR0_SDSTP1_EBCW_MASK;
@@ -564,277 +562,6 @@ int checkboard (void)
return 0;
}
-static long int yucca_probe_for_dimms(void)
-{
- int dimm_installed[MAXDIMMS];
- int dimm_num, result;
- int dimms_found = 0;
- uchar dimm_addr = IIC0_DIMM0_ADDR;
- uchar dimm_spd_data[MAX_SPD_BYTES];
-
- for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
- /* check if there is a chip at the dimm address */
- switch (dimm_num) {
- case 0:
- dimm_addr = IIC0_DIMM0_ADDR;
- break;
- case 1:
- dimm_addr = IIC0_DIMM1_ADDR;
- break;
- }
-
- result = i2c_probe(dimm_addr);
-
- memset(dimm_spd_data, 0, MAX_SPD_BYTES * sizeof(char));
- if (result == 0) {
- /* read first byte of SPD data, if there is any data */
- result = i2c_read(dimm_addr, 0, 1, dimm_spd_data, 1);
-
- if (result == 0) {
- result = dimm_spd_data[0];
- result = result > MAX_SPD_BYTES ?
- MAX_SPD_BYTES : result;
- result = i2c_read(dimm_addr, 0, 1,
- dimm_spd_data, result);
- }
- }
-
- if ((result == 0) &&
- (dimm_spd_data[64] == MICRON_SPD_JEDEC_ID)) {
- dimm_installed[dimm_num] = TRUE;
- dimms_found++;
- debug("DIMM slot %d: DDR2 SDRAM detected\n", dimm_num);
- } else {
- dimm_installed[dimm_num] = FALSE;
- debug("DIMM slot %d: Not populated or cannot sucessfully probe the DIMM\n", dimm_num);
- }
- }
-
- if (dimms_found == 0) {
- printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
- hang();
- }
-
- if (dimm_installed[0] != TRUE) {
- printf("\nERROR - DIMM slot 0 must be populated before DIMM slot 1.\n");
- printf(" Unsupported configuration. Move DIMM module from DIMM slot 1 to slot 0.\n\n");
- hang();
- }
-
- return dimms_found;
-}
-
-/*************************************************************************
- * init SDRAM controller with fixed value
- * the initialization values are for 2x MICRON DDR2
- * PN: MT18HTF6472DY-53EB2
- * 512MB, DDR2, 533, CL4, ECC, REG
- ************************************************************************/
-static long int fixed_sdram(void)
-{
- long int yucca_dimms = 0;
-
- yucca_dimms = yucca_probe_for_dimms();
-
- /* SDRAM0_MCOPT2 (0X21) Clear DCEN BIT */
- mtdcr( 0x10, 0x00000021 );
- mtdcr( 0x11, 0x84000000 );
-
- /* SDRAM0_MCOPT1 (0X20) ECC OFF / 64 bits / 4 banks / DDR2 */
- mtdcr( 0x10, 0x00000020 );
- mtdcr( 0x11, 0x2D122000 );
-
- /* SET MCIF0_CODT Die Termination On */
- mtdcr( 0x10, 0x00000026 );
- if (yucca_dimms == 2)
- mtdcr( 0x11, 0x2A800021 );
- else if (yucca_dimms == 1)
- mtdcr( 0x11, 0x02800021 );
-
- /* On-Die Termination for Bank 0 */
- mtdcr( 0x10, 0x00000022 );
- if (yucca_dimms == 2)
- mtdcr( 0x11, 0x18000000 );
- else if (yucca_dimms == 1)
- mtdcr( 0x11, 0x06000000 );
-
- /* On-Die Termination for Bank 1 */
- mtdcr( 0x10, 0x00000023 );
- if (yucca_dimms == 2)
- mtdcr( 0x11, 0x18000000 );
- else if (yucca_dimms == 1)
- mtdcr( 0x11, 0x01800000 );
-
- /* On-Die Termination for Bank 2 */
- mtdcr( 0x10, 0x00000024 );
- if (yucca_dimms == 2)
- mtdcr( 0x11, 0x01800000 );
- else if (yucca_dimms == 1)
- mtdcr( 0x11, 0x00000000 );
-
- /* On-Die Termination for Bank 3 */
- mtdcr( 0x10, 0x00000025 );
- if (yucca_dimms == 2)
- mtdcr( 0x11, 0x01800000 );
- else if (yucca_dimms == 1)
- mtdcr( 0x11, 0x00000000 );
-
- /* Refresh Time register (0x30) Refresh every 7.8125uS */
- mtdcr( 0x10, 0x00000030 );
- mtdcr( 0x11, 0x08200000 );
-
- /* SET MCIF0_MMODE CL 4 */
- mtdcr( 0x10, 0x00000088 );
- mtdcr( 0x11, 0x00000642 );
-
- /* MCIF0_MEMODE */
- mtdcr( 0x10, 0x00000089 );
- mtdcr( 0x11, 0x00000004 );
-
- /*SET MCIF0_MB0CF */
- mtdcr( 0x10, 0x00000040 );
- mtdcr( 0x11, 0x00000201 );
-
- /* SET MCIF0_MB1CF */
- mtdcr( 0x10, 0x00000044 );
- mtdcr( 0x11, 0x00000201 );
-
- /* SET MCIF0_MB2CF */
- mtdcr( 0x10, 0x00000048 );
- if (yucca_dimms == 2)
- mtdcr( 0x11, 0x00000201 );
- else if (yucca_dimms == 1)
- mtdcr( 0x11, 0x00000000 );
-
- /* SET MCIF0_MB3CF */
- mtdcr( 0x10, 0x0000004c );
- if (yucca_dimms == 2)
- mtdcr( 0x11, 0x00000201 );
- else if (yucca_dimms == 1)
- mtdcr( 0x11, 0x00000000 );
-
- /* SET MCIF0_INITPLR0 # NOP */
- mtdcr( 0x10, 0x00000050 );
- mtdcr( 0x11, 0xB5380000 );
-
- /* SET MCIF0_INITPLR1 # PRE */
- mtdcr( 0x10, 0x00000051 );
- mtdcr( 0x11, 0x82100400 );
-
- /* SET MCIF0_INITPLR2 # EMR2 */
- mtdcr( 0x10, 0x00000052 );
- mtdcr( 0x11, 0x80820000 );
-
- /* SET MCIF0_INITPLR3 # EMR3 */
- mtdcr( 0x10, 0x00000053 );
- mtdcr( 0x11, 0x80830000 );
-
- /* SET MCIF0_INITPLR4 # EMR DLL ENABLE */
- mtdcr( 0x10, 0x00000054 );
- mtdcr( 0x11, 0x80810000 );
-
- /* SET MCIF0_INITPLR5 # MR DLL RESET */
- mtdcr( 0x10, 0x00000055 );
- mtdcr( 0x11, 0x80800542 );
-
- /* SET MCIF0_INITPLR6 # PRE */
- mtdcr( 0x10, 0x00000056 );
- mtdcr( 0x11, 0x82100400 );
-
- /* SET MCIF0_INITPLR7 # Refresh */
- mtdcr( 0x10, 0x00000057 );
- mtdcr( 0x11, 0x8A080000 );
-
- /* SET MCIF0_INITPLR8 # Refresh */
- mtdcr( 0x10, 0x00000058 );
- mtdcr( 0x11, 0x8A080000 );
-
- /* SET MCIF0_INITPLR9 # Refresh */
- mtdcr( 0x10, 0x00000059 );
- mtdcr( 0x11, 0x8A080000 );
-
- /* SET MCIF0_INITPLR10 # Refresh */
- mtdcr( 0x10, 0x0000005A );
- mtdcr( 0x11, 0x8A080000 );
-
- /* SET MCIF0_INITPLR11 # MR */
- mtdcr( 0x10, 0x0000005B );
- mtdcr( 0x11, 0x80800442 );
-
- /* SET MCIF0_INITPLR12 # EMR OCD Default*/
- mtdcr( 0x10, 0x0000005C );
- mtdcr( 0x11, 0x80810380 );
-
- /* SET MCIF0_INITPLR13 # EMR OCD Exit */
- mtdcr( 0x10, 0x0000005D );
- mtdcr( 0x11, 0x80810000 );
-
- /* 0x80: Adv Addr clock by 180 deg */
- mtdcr( 0x10, 0x00000080 );
- mtdcr( 0x11, 0x80000000 );
-
- /* 0x21: Exit self refresh, set DC_EN */
- mtdcr( 0x10, 0x00000021 );
- mtdcr( 0x11, 0x28000000 );
-
- /* 0x81: Write DQS Adv 90 + Fractional DQS Delay */
- mtdcr( 0x10, 0x00000081 );
- mtdcr( 0x11, 0x80000800 );
-
- /* MCIF0_SDTR1 */
- mtdcr( 0x10, 0x00000085 );
- mtdcr( 0x11, 0x80201000 );
-
- /* MCIF0_SDTR2 */
- mtdcr( 0x10, 0x00000086 );
- mtdcr( 0x11, 0x42103242 );
-
- /* MCIF0_SDTR3 */
- mtdcr( 0x10, 0x00000087 );
- mtdcr( 0x11, 0x0C100D14 );
-
- /* SET MQ0_B0BAS base addr 00000000 / 256MB */
- mtdcr( 0x40, 0x0000F800 );
-
- /* SET MQ0_B1BAS base addr 10000000 / 256MB */
- mtdcr( 0x41, 0x0400F800 );
-
- /* SET MQ0_B2BAS base addr 20000000 / 256MB */
- if (yucca_dimms == 2)
- mtdcr( 0x42, 0x0800F800 );
- else if (yucca_dimms == 1)
- mtdcr( 0x42, 0x00000000 );
-
- /* SET MQ0_B3BAS base addr 30000000 / 256MB */
- if (yucca_dimms == 2)
- mtdcr( 0x43, 0x0C00F800 );
- else if (yucca_dimms == 1)
- mtdcr( 0x43, 0x00000000 );
-
- /* SDRAM_RQDC */
- mtdcr( 0x10, 0x00000070 );
- mtdcr( 0x11, 0x8000003F );
-
- /* SDRAM_RDCC */
- mtdcr( 0x10, 0x00000078 );
- mtdcr( 0x11, 0x80000000 );
-
- /* SDRAM_RFDC */
- mtdcr( 0x10, 0x00000074 );
- mtdcr( 0x11, 0x00000220 );
-
- return (yucca_dimms * 512) << 20;
-}
-
-long int initdram (int board_type)
-{
- long dram_size = 0;
-
- dram_size = fixed_sdram();
-
- return dram_size;
-}
-
#if defined(CFG_DRAM_TEST)
int testdram (void)
{
@@ -1267,42 +994,3 @@ int onboard_pci_arbiter_selected(int core_pci)
#endif
return (BOARD_OPTION_NOT_SELECTED);
}
-
-/*---------------------------------------------------------------------------+
- | ppcMfcpr.
- +---------------------------------------------------------------------------*/
-unsigned long ppcMfcpr(unsigned long cpr_reg)
-{
- unsigned long msr;
- unsigned long cpr_cfgaddr_temp;
- unsigned long cpr_value;
-
- msr = (mfmsr () & ~(MSR_EE));
- cpr_cfgaddr_temp = mfdcr(CPR0_CFGADDR);
- mtdcr(CPR0_CFGADDR, cpr_reg);
- cpr_value = mfdcr(CPR0_CFGDATA);
- mtdcr(CPR0_CFGADDR, cpr_cfgaddr_temp);
- mtmsr(msr);
-
- return (cpr_value);
-}
-
-/*----------------------------------------------------------------------------+
-| Indirect Access of the System DCR's (SDR)
-| ppcMfsdr
-+----------------------------------------------------------------------------*/
-unsigned long ppcMfsdr(unsigned long sdr_reg)
-{
- unsigned long msr;
- unsigned long sdr_cfgaddr_temp;
- unsigned long sdr_value;
-
- msr = (mfmsr () & ~(MSR_EE));
- sdr_cfgaddr_temp = mfdcr(SDR0_CFGADDR);
- mtdcr(SDR0_CFGADDR, sdr_reg);
- sdr_value = mfdcr(SDR0_CFGDATA);
- mtdcr(SDR0_CFGADDR, sdr_cfgaddr_temp);
- mtmsr(msr);
-
- return (sdr_value);
-}