diff options
Diffstat (limited to 'board/amcc')
| -rw-r--r-- | board/amcc/kilauea/init.S | 227 | ||||
| -rw-r--r-- | board/amcc/kilauea/memory.c | 5 | ||||
| -rw-r--r-- | board/amcc/makalu/Makefile | 2 | ||||
| -rw-r--r-- | board/amcc/makalu/init.S | 125 | ||||
| -rw-r--r-- | board/amcc/makalu/makalu.c | 5 | ||||
| -rw-r--r-- | board/amcc/makalu/memory.c | 188 |
6 files changed, 135 insertions, 417 deletions
diff --git a/board/amcc/kilauea/init.S b/board/amcc/kilauea/init.S index 8cd534c..bf47d6b 100644 --- a/board/amcc/kilauea/init.S +++ b/board/amcc/kilauea/init.S @@ -1,8 +1,11 @@ /* + * Copyright (c) 2008 Nuovation System Designs, LLC + * Grant Erickson <gerickson@nuovations.com> + * * (C) Copyright 2007-2008 * Stefan Roese, DENX Software Engineering, sr@denx.de. * - * Based on code provided from UDTech and AMCC + * Originally based on code provided from UDTech and AMCC * * See file CREDITS for list of people who contributed to this * project. @@ -30,125 +33,135 @@ #include <ppc_defs.h> #define mtsdram_as(reg, value) \ - addi r4,0,reg ; \ - mtdcr memcfga,r4 ; \ - addis r4,0,value@h ; \ - ori r4,r4,value@l ; \ - mtdcr memcfgd,r4 ; + addi r4,0,reg ; \ + mtdcr memcfga,r4 ; \ + addis r4,0,value@h ; \ + ori r4,r4,value@l ; \ + mtdcr memcfgd,r4 ; + +#if defined(CONFIG_DDR_ECC) + .extern ecc_init +#endif /* defined(CONFIG_DDR_ECC) */ .globl ext_bus_cntlr_init ext_bus_cntlr_init: +#if !defined(CFG_INIT_DCACHE_CS) #if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) /* - * DDR2 setup + * DDR2 SDRAM Controller Setup */ - /* Following the DDR Core Manual, here is the initialization */ - - /* Step 1 */ - - /* Step 2 */ - - /* Step 3 */ - - /* base=00000000, size=256MByte (6), mode=7 (n*10*8) */ - mtsdram_as(SDRAM_MB0CF, 0x00006701); - - /* SET SDRAM_MB1CF - Not enabled */ - mtsdram_as(SDRAM_MB1CF, 0x00000000); - - /* SET SDRAM_MB2CF - Not enabled */ - mtsdram_as(SDRAM_MB2CF, 0x00000000); - - /* SET SDRAM_MB3CF - Not enabled */ - mtsdram_as(SDRAM_MB3CF, 0x00000000); - - /* SDRAM_CLKTR: Adv Addr clock by 180 deg */ - mtsdram_as(SDRAM_CLKTR, 0x80000000); - - /* Refresh Time register (0x30) Refresh every 7.8125uS */ - mtsdram_as(SDRAM_RTR, 0x06180000); + /* Set Memory Bank Configuration Registers */ + mtsdram_as(SDRAM_MB0CF, CFG_SDRAM0_MB0CF); + mtsdram_as(SDRAM_MB1CF, CFG_SDRAM0_MB1CF); + mtsdram_as(SDRAM_MB2CF, CFG_SDRAM0_MB2CF); + mtsdram_as(SDRAM_MB3CF, CFG_SDRAM0_MB3CF); + + /* Set Memory Clock Timing Register */ + mtsdram_as(SDRAM_CLKTR, CFG_SDRAM0_CLKTR); + + /* Set Refresh Time Register */ + mtsdram_as(SDRAM_RTR, CFG_SDRAM0_RTR); + + /* Set SDRAM Timing Registers */ + mtsdram_as(SDRAM_SDTR1, CFG_SDRAM0_SDTR1); + mtsdram_as(SDRAM_SDTR2, CFG_SDRAM0_SDTR2); + mtsdram_as(SDRAM_SDTR3, CFG_SDRAM0_SDTR3); + + /* Set Mode and Extended Mode Registers */ + mtsdram_as(SDRAM_MMODE, CFG_SDRAM0_MMODE); + mtsdram_as(SDRAM_MEMODE, CFG_SDRAM0_MEMODE); + + /* Set Memory Controller Options 1 Register */ + mtsdram_as(SDRAM_MCOPT1, CFG_SDRAM0_MCOPT1); + + /* Set Manual Initialization Control Registers */ + mtsdram_as(SDRAM_INITPLR0, CFG_SDRAM0_INITPLR0); + mtsdram_as(SDRAM_INITPLR1, CFG_SDRAM0_INITPLR1); + mtsdram_as(SDRAM_INITPLR2, CFG_SDRAM0_INITPLR2); + mtsdram_as(SDRAM_INITPLR3, CFG_SDRAM0_INITPLR3); + mtsdram_as(SDRAM_INITPLR4, CFG_SDRAM0_INITPLR4); + mtsdram_as(SDRAM_INITPLR5, CFG_SDRAM0_INITPLR5); + mtsdram_as(SDRAM_INITPLR6, CFG_SDRAM0_INITPLR6); + mtsdram_as(SDRAM_INITPLR7, CFG_SDRAM0_INITPLR7); + mtsdram_as(SDRAM_INITPLR8, CFG_SDRAM0_INITPLR8); + mtsdram_as(SDRAM_INITPLR9, CFG_SDRAM0_INITPLR9); + mtsdram_as(SDRAM_INITPLR10, CFG_SDRAM0_INITPLR10); + mtsdram_as(SDRAM_INITPLR11, CFG_SDRAM0_INITPLR11); + mtsdram_as(SDRAM_INITPLR12, CFG_SDRAM0_INITPLR12); + mtsdram_as(SDRAM_INITPLR13, CFG_SDRAM0_INITPLR13); + mtsdram_as(SDRAM_INITPLR14, CFG_SDRAM0_INITPLR14); + mtsdram_as(SDRAM_INITPLR15, CFG_SDRAM0_INITPLR15); + + /* Set On-Die Termination Registers */ + mtsdram_as(SDRAM_CODT, CFG_SDRAM0_CODT); + mtsdram_as(SDRAM_MODT0, CFG_SDRAM0_MODT0); + mtsdram_as(SDRAM_MODT1, CFG_SDRAM0_MODT1); + + /* Set Write Timing Register */ + mtsdram_as(SDRAM_WRDTR, CFG_SDRAM0_WRDTR); - /* SDRAM_SDTR1 */ - mtsdram_as(SDRAM_SDTR1, 0x80201000); - - /* SDRAM_SDTR2 */ - mtsdram_as(SDRAM_SDTR2, 0x32204232); + /* + * Start Initialization by SDRAM0_MCOPT2[SREN] = 0 and + * SDRAM0_MCOPT2[IPTR] = 1 + */ + mtsdram_as(SDRAM_MCOPT2, SDRAM_MCOPT2_SREN_EXIT | \ + SDRAM_MCOPT2_IPTR_EXECUTE); - /* SDRAM_SDTR3 */ - mtsdram_as(SDRAM_SDTR3, 0x080b0d1a); + /* + * Poll SDRAM0_MCSTAT[MIC] for assertion to indicate the + * completion of initialization. + * + * do { + * mfsdram(SDRAM_MCSTAT, val); + * } while ((val & SDRAM_MCSTAT_MIC_MASK) != SDRAM_MCSTAT_MIC_COMP); + */ + li r4,SDRAM_MCSTAT + lis r2,SDRAM_MCSTAT_MIC_COMP@h + ori r2,r2,SDRAM_MCSTAT_MIC_COMP@l +0: mtdcr memcfga,r4 + mfdcr r3,memcfgd + clrrwi r3,r3,31 + cmpw cr7,r3,r2 + bne+ cr7,0b + + /* Set Delay Control Registers */ + mtsdram_as(SDRAM_DLCR, CFG_SDRAM0_DLCR); + mtsdram_as(SDRAM_RDCC, CFG_SDRAM0_RDCC); + mtsdram_as(SDRAM_RQDC, CFG_SDRAM0_RQDC); + mtsdram_as(SDRAM_RFDC, CFG_SDRAM0_RFDC); - mtsdram_as(SDRAM_MMODE, 0x00000442); - mtsdram_as(SDRAM_MEMODE, 0x00000404); + /* + * Enable Controller by SDRAM0_MCOPT2[DCEN] = 1: + * + * mcopt2 = mfsdram(SDRAM_MCOPT2); + */ + li r4,SDRAM_MCOPT2 + mtdcr memcfga,r4 + mfdcr r3,memcfgd - /* SDRAM0_MCOPT1 (0X20) No ECC Gen */ - mtsdram_as(SDRAM_MCOPT1, 0x04322000); + /* + * mtsdram(SDRAM_MCOPT2, mcopt2 | SDRAM_MCOPT2_DCEN_ENABLE); + */ + mtdcr memcfga,r4 + oris r3,r3,SDRAM_MCOPT2_DCEN_ENABLE@h + ori r3,r3,SDRAM_MCOPT2_DCEN_ENABLE@l + mtdcr memcfgd,r3 - /* NOP */ - mtsdram_as(SDRAM_INITPLR0, 0xa8380000); - /* precharge 3 DDR clock cycle */ - mtsdram_as(SDRAM_INITPLR1, 0x81900400); - /* EMR2 twr = 2tck */ - mtsdram_as(SDRAM_INITPLR2, 0x81020000); - /* EMR3 twr = 2tck */ - mtsdram_as(SDRAM_INITPLR3, 0x81030000); - /* EMR DLL ENABLE twr = 2tck */ - mtsdram_as(SDRAM_INITPLR4, 0x81010404); - /* MR w/ DLL reset - * Note: 5 is CL. May need to be changed +#if defined(CONFIG_DDR_ECC) + /* + * ecc_init(CFG_SDRAM_BASE, CFG_MBYTES_SDRAM << 20); */ - mtsdram_as(SDRAM_INITPLR5, 0x81000542); - /* precharge 3 DDR clock cycle */ - mtsdram_as(SDRAM_INITPLR6, 0x81900400); - /* Auto-refresh trfc = 26tck */ - mtsdram_as(SDRAM_INITPLR7, 0x8D080000); - /* Auto-refresh trfc = 26tck */ - mtsdram_as(SDRAM_INITPLR8, 0x8D080000); - /* Auto-refresh */ - mtsdram_as(SDRAM_INITPLR9, 0x8D080000); - /* Auto-refresh */ - mtsdram_as(SDRAM_INITPLR10, 0x8D080000); - /* MRS - normal operation; wait 2 cycle (set wait to tMRD) */ - mtsdram_as(SDRAM_INITPLR11, 0x81000442); - mtsdram_as(SDRAM_INITPLR12, 0x81010780); - mtsdram_as(SDRAM_INITPLR13, 0x81010400); - mtsdram_as(SDRAM_INITPLR14, 0x00000000); - mtsdram_as(SDRAM_INITPLR15, 0x00000000); - - /* SET MCIF0_CODT Die Termination On */ - mtsdram_as(SDRAM_CODT, 0x0080f837); - mtsdram_as(SDRAM_MODT0, 0x01800000); - mtsdram_as(SDRAM_MODT1, 0x00000000); - - mtsdram_as(SDRAM_WRDTR, 0x00000000); - - /* SDRAM0_MCOPT2 (0X21) Start initialization */ - mtsdram_as(SDRAM_MCOPT2, 0x20000000); - - /* Step 5 */ - lis r3,0x1 /* 400000 = wait 100ms */ - mtctr r3 - -pll_wait: - bdnz pll_wait - - /* Step 6 */ - - /* SDRAM_DLCR */ - mtsdram_as(SDRAM_DLCR, 0x030000a5); - - /* SDRAM_RDCC */ - mtsdram_as(SDRAM_RDCC, 0x40000000); - - /* SDRAM_RQDC */ - mtsdram_as(SDRAM_RQDC, 0x80000038); - - /* SDRAM_RFDC */ - mtsdram_as(SDRAM_RFDC, 0x00000209); - - /* Enable memory controller */ - mtsdram_as(SDRAM_MCOPT2, 0x28000000); -#endif /* #ifndef CONFIG_NAND_U_BOOT */ + mflr r13 + lis r3,CFG_SDRAM_BASE@h + ori r3,r3,CFG_SDRAM_BASE@l + lis r4,(CFG_MBYTES_SDRAM << 20)@h + ori r4,r4,(CFG_MBYTES_SDRAM << 20)@l + bl ecc_init + mtlr r13 +#endif /* defined(CONFIG_DDR_ECC) */ +#endif /* !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */ +#endif /* !defined(CFG_INIT_DCACHE_CS) */ blr diff --git a/board/amcc/kilauea/memory.c b/board/amcc/kilauea/memory.c index 1d7a3fa..b7e2344 100644 --- a/board/amcc/kilauea/memory.c +++ b/board/amcc/kilauea/memory.c @@ -1,4 +1,7 @@ /* + * Copyright (c) 2008 Nuovation System Designs, LLC + * Grant Erickson <gerickson@nuovations.com> + * * (C) Copyright 2007 * Stefan Roese, DENX Software Engineering, sr@denx.de. * @@ -30,10 +33,12 @@ void sdram_init(void) return; } +#if defined(CONFIG_NAND_U_BOOT) long int initdram(int board_type) { return (CFG_MBYTES_SDRAM << 20); } +#endif /* defined(CONFIG_NAND_U_BOOT) */ #if defined(CFG_DRAM_TEST) int testdram (void) diff --git a/board/amcc/makalu/Makefile b/board/amcc/makalu/Makefile index 39328c2..4def0d4 100644 --- a/board/amcc/makalu/Makefile +++ b/board/amcc/makalu/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o cmd_pll.o memory.o +COBJS = $(BOARD).o cmd_pll.o SOBJS = init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/board/amcc/makalu/init.S b/board/amcc/makalu/init.S index 11c5b19..4d0f460 100644 --- a/board/amcc/makalu/init.S +++ b/board/amcc/makalu/init.S @@ -1,8 +1,11 @@ /* + * Copyright (c) 2008 Nuovation System Designs, LLC + * Grant Erickson <gerickson@nuovations.com> + * * (C) Copyright 2007-2008 * Stefan Roese, DENX Software Engineering, sr@denx.de. * - * Based on code provided from Senao and AMCC + * Originally based on code provided from Senao and AMCC * * See file CREDITS for list of people who contributed to this * project. @@ -23,126 +26,6 @@ * MA 02111-1307 USA */ -#include <config.h> -#include <ppc4xx.h> - -#include <ppc_asm.tmpl> -#include <ppc_defs.h> - -#define mtsdram_as(reg, value) \ - addi r4,0,reg ; \ - mtdcr memcfga,r4 ; \ - addis r4,0,value@h ; \ - ori r4,r4,value@l ; \ - mtdcr memcfgd,r4 ; - .globl ext_bus_cntlr_init ext_bus_cntlr_init: - - /* - * DDR2 setup - */ - - /* Following the DDR Core Manual, here is the initialization */ - - /* Step 1 */ - - /* Step 2 */ - - /* Step 3 */ - - /* base=00000000, size=128MByte (5), mode=2 (n*10*4) */ - mtsdram_as(SDRAM_MB0CF, 0x00005201); - - /* base=08000000, size=128MByte (5), mode=2 (n*10*4) */ - mtsdram_as(SDRAM_MB1CF, (0x08000000 >> 3) | 0x5201); - - /* SDRAM_CLKTR: Adv Addr clock by 180 deg */ - mtsdram_as(SDRAM_CLKTR,0x80000000); - - /* Refresh Time register (0x30) Refresh every 7.8125uS */ - mtsdram_as(SDRAM_RTR, 0x06180000); - - /* SDRAM_SDTR1 */ - mtsdram_as(SDRAM_SDTR1, 0x80201000); - - /* SDRAM_SDTR2 */ - mtsdram_as(SDRAM_SDTR2, 0x32204232); - - /* SDRAM_SDTR3 */ - mtsdram_as(SDRAM_SDTR3, 0x080b0d1a); - - mtsdram_as(SDRAM_MMODE, 0x00000442); - mtsdram_as(SDRAM_MEMODE, 0x00000404); - - /* SDRAM0_MCOPT1 (0X20) No ECC Gen */ - mtsdram_as(SDRAM_MCOPT1, 0x04322000); - - /* NOP */ - mtsdram_as(SDRAM_INITPLR0, 0xa8380000); - /* precharge 3 DDR clock cycle */ - mtsdram_as(SDRAM_INITPLR1, 0x81900400); - /* EMR2 twr = 2tck */ - mtsdram_as(SDRAM_INITPLR2, 0x81020000); - /* EMR3 twr = 2tck */ - mtsdram_as(SDRAM_INITPLR3, 0x81030000); - /* EMR DLL ENABLE twr = 2tck */ - mtsdram_as(SDRAM_INITPLR4, 0x81010404); - /* MR w/ DLL reset - * Note: 5 is CL. May need to be changed - */ - mtsdram_as(SDRAM_INITPLR5, 0x81000542); - /* precharge 3 DDR clock cycle */ - mtsdram_as(SDRAM_INITPLR6, 0x81900400); - /* Auto-refresh trfc = 26tck */ - mtsdram_as(SDRAM_INITPLR7, 0x8D080000); - /* Auto-refresh trfc = 26tck */ - mtsdram_as(SDRAM_INITPLR8, 0x8D080000); - /* Auto-refresh */ - mtsdram_as(SDRAM_INITPLR9, 0x8D080000); - /* Auto-refresh */ - mtsdram_as(SDRAM_INITPLR10, 0x8D080000); - /* MRS - normal operation; wait 2 cycle (set wait to tMRD) */ - mtsdram_as(SDRAM_INITPLR11, 0x81000442); - mtsdram_as(SDRAM_INITPLR12, 0x81010780); - mtsdram_as(SDRAM_INITPLR13, 0x81010400); - mtsdram_as(SDRAM_INITPLR14, 0x00000000); - mtsdram_as(SDRAM_INITPLR15, 0x00000000); - - /* SET MCIF0_CODT Die Termination On */ - mtsdram_as(SDRAM_CODT, 0x0080f837); - mtsdram_as(SDRAM_MODT0, 0x01800000); -#if 0 /* test-only: not sure if 0 is ok when 2nd bank is used */ - mtsdram_as(SDRAM_MODT1, 0x00000000); -#endif - - mtsdram_as(SDRAM_WRDTR, 0x00000000); - - /* SDRAM0_MCOPT2 (0X21) Start initialization */ - mtsdram_as(SDRAM_MCOPT2, 0x20000000); - - /* Step 5 */ - lis r3,0x1 /* 400000 = wait 100ms */ - mtctr r3 - -pll_wait: - bdnz pll_wait - - /* Step 6 */ - - /* SDRAM_DLCR */ - mtsdram_as(SDRAM_DLCR, 0x030000a5); - - /* SDRAM_RDCC */ - mtsdram_as(SDRAM_RDCC, 0x40000000); - - /* SDRAM_RQDC */ - mtsdram_as(SDRAM_RQDC, 0x80000038); - - /* SDRAM_RFDC */ - mtsdram_as(SDRAM_RFDC, 0x00000209); - - /* Enable memory controller */ - mtsdram_as(SDRAM_MCOPT2, 0x28000000); - blr diff --git a/board/amcc/makalu/makalu.c b/board/amcc/makalu/makalu.c index 9baec9a..adf604f 100644 --- a/board/amcc/makalu/makalu.c +++ b/board/amcc/makalu/makalu.c @@ -351,3 +351,8 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_strerror(rc)); } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ + +void sdram_init(void) +{ + return; +} diff --git a/board/amcc/makalu/memory.c b/board/amcc/makalu/memory.c deleted file mode 100644 index b03b60b..0000000 --- a/board/amcc/makalu/memory.c +++ /dev/null @@ -1,188 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/processor.h> - -void sdram_init(void) -{ - return; -} - -long int initdram(int board_type) -{ - /* - * Same as on Kilauea, Makalu generates exception 0x200 - * (machine check) after trap_init() in board_init_f, - * when SDRAM is initialized here (late) and d-cache is - * used earlier as INIT_RAM. - * So for now, initialize DDR2 in init.S very early and - * also use it for INIT_RAM. Then this exception doesn't - * occur. - */ -#if 0 - u32 val; - - /* base=00000000, size=128MByte (5), mode=2 (n*10*4) */ - mtsdram(SDRAM_MB0CF, 0x00005201); - - /* SET SDRAM_MB1CF - Not enabled */ - mtsdram(SDRAM_MB1CF, 0x00000000); - - /* SET SDRAM_MB2CF - Not enabled */ - mtsdram(SDRAM_MB2CF, 0x00000000); - - /* SET SDRAM_MB3CF - Not enabled */ - mtsdram(SDRAM_MB3CF, 0x00000000); - - /* SDRAM_CLKTR: Adv Addr clock by 90 deg */ - mtsdram(SDRAM_CLKTR, 0x80000000); - - /* Refresh Time register (0x30) Refresh every 7.8125uS */ - mtsdram(SDRAM_RTR, 0x06180000); - - /* SDRAM_SDTR1 */ - mtsdram(SDRAM_SDTR1, 0x80201000); - - /* SDRAM_SDTR2 */ - mtsdram(SDRAM_SDTR2, 0x32204232); - - /* SDRAM_SDTR3 */ - mtsdram(SDRAM_SDTR3, 0x080b0d1a); - - mtsdram(SDRAM_MMODE, 0x00000442); - mtsdram(SDRAM_MEMODE, 0x00000404); - - /* SDRAM0_MCOPT1 (0X20) No ECC Gen */ - mtsdram(SDRAM_MCOPT1, 0x04322000); - - /* NOP */ - mtsdram(SDRAM_INITPLR0, 0xa8380000); - /* precharge 3 DDR clock cycle */ - mtsdram(SDRAM_INITPLR1, 0x81900400); - /* EMR2 twr = 2tck */ - mtsdram(SDRAM_INITPLR2, 0x81020000); - /* EMR3 twr = 2tck */ - mtsdram(SDRAM_INITPLR3, 0x81030000); - /* EMR DLL ENABLE twr = 2tck */ - mtsdram(SDRAM_INITPLR4, 0x81010404); - /* MR w/ DLL reset - * Note: 5 is CL. May need to be changed - */ - mtsdram(SDRAM_INITPLR5, 0x81000542); - /* precharge 3 DDR clock cycle */ - mtsdram(SDRAM_INITPLR6, 0x81900400); - /* Auto-refresh trfc = 26tck */ - mtsdram(SDRAM_INITPLR7, 0x8D080000); - /* Auto-refresh trfc = 26tck */ - mtsdram(SDRAM_INITPLR8, 0x8D080000); - /* Auto-refresh */ - mtsdram(SDRAM_INITPLR9, 0x8D080000); - /* Auto-refresh */ - mtsdram(SDRAM_INITPLR10, 0x8D080000); - /* MRS - normal operation; wait 2 cycle (set wait to tMRD) */ - mtsdram(SDRAM_INITPLR11, 0x81000442); - mtsdram(SDRAM_INITPLR12, 0x81010780); - mtsdram(SDRAM_INITPLR13, 0x81010400); - mtsdram(SDRAM_INITPLR14, 0x00000000); - mtsdram(SDRAM_INITPLR15, 0x00000000); - - /* SET MCIF0_CODT Die Termination On */ - mtsdram(SDRAM_CODT, 0x0080f837); - mtsdram(SDRAM_MODT0, 0x01800000); - mtsdram(SDRAM_MODT1, 0x00000000); - - mtsdram(SDRAM_WRDTR, 0x00000000); - - /* SDRAM0_MCOPT2 (0X21) Start initialization */ - mtsdram(SDRAM_MCOPT2, 0x20000000); - - /* Step 5 */ - do { - mfsdram(SDRAM_MCSTAT, val); - } while ((val & SDRAM_MCSTAT_MIC_COMP) != SDRAM_MCSTAT_MIC_COMP); - - /* Step 6 */ - - /* SDRAM_DLCR */ - mtsdram(SDRAM_DLCR, 0x030000a5); - - /* SDRAM_RDCC */ - mtsdram(SDRAM_RDCC, 0x40000000); - - /* SDRAM_RQDC */ - mtsdram(SDRAM_RQDC, 0x80000038); - - /* SDRAM_RFDC */ - mtsdram(SDRAM_RFDC, 0x00000209); - - /* Enable memory controller */ - mfsdram(SDRAM_MCOPT2, val); - val |= SDRAM_MCOPT2_DCEN_ENABLE; - mtsdram(SDRAM_MCOPT2, val); -#endif - return (CFG_MBYTES_SDRAM << 20); -} - -#if defined(CFG_DRAM_TEST) -int testdram (void) -{ - printf ("testdram\n"); -#if defined (CONFIG_NAND_U_BOOT) - return 0; -#endif - uint *pstart = (uint *) 0x00000000; - uint *pend = (uint *) 0x00001000; - uint *p; - - for (p = pstart; p < pend; p++) { - *p = 0xaaaaaaaa; - } - - for (p = pstart; p < pend; p++) { - if (*p != 0xaaaaaaaa) { -#if !defined (CONFIG_NAND_SPL) - printf ("SDRAM test fails at: %08x\n", (uint) p); -#endif - return 1; - } - } - - for (p = pstart; p < pend; p++) { - *p = 0x55555555; - } - - for (p = pstart; p < pend; p++) { - if (*p != 0x55555555) { -#if !defined (CONFIG_NAND_SPL) - printf ("SDRAM test fails at: %08x\n", (uint) p); -#endif - return 1; - } - } -#if !defined (CONFIG_NAND_SPL) - printf ("SDRAM test passed!!!\n"); -#endif - return 0; -} -#endif |