diff options
Diffstat (limited to 'board/amcc')
| -rw-r--r-- | board/amcc/luan/luan.c | 17 | ||||
| -rw-r--r-- | board/amcc/sequoia/cmd_sequoia.c | 17 | ||||
| -rw-r--r-- | board/amcc/sequoia/sequoia.c | 7 | ||||
| -rw-r--r-- | board/amcc/yosemite/yosemite.c | 7 |
4 files changed, 35 insertions, 13 deletions
diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c index 7b16f8a..0067ce0 100644 --- a/board/amcc/luan/luan.c +++ b/board/amcc/luan/luan.c @@ -39,8 +39,6 @@ extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ ************************************************************************/ int board_early_init_f(void) { - volatile epld_t *x = (epld_t *) CFG_EPLD_BASE; - mtebc( pb0ap, 0x03800000 ); /* set chip selects */ mtebc( pb0cr, 0xffc58000 ); /* ebc0_b0cr, 4MB at 0xffc00000 CS0 */ mtebc( pb1ap, 0x03800000 ); @@ -66,8 +64,6 @@ int board_early_init_f(void) mtdcr( uic0sr, 0x00000000 ); /* clear all interrupts */ mtdcr( uic0sr, 0xffffffff ); - x->ethuart &= ~EPLD2_RESET_ETH_N; /* put Ethernet+PHY in reset */ - return 0; } @@ -79,7 +75,18 @@ int board_early_init_f(void) int misc_init_r(void) { volatile epld_t *x = (epld_t *) CFG_EPLD_BASE; - x->ethuart |= EPLD2_RESET_ETH_N; /* take Ethernet+PHY out of reset */ + + /* set modes of operation */ + x->ethuart |= EPLD2_ETH_MODE_10 | EPLD2_ETH_MODE_100 | + EPLD2_ETH_MODE_1000 | EPLD2_ETH_DUPLEX_MODE; + /* clear ETHERNET_AUTO_NEGO bit to turn on autonegotiation */ + x->ethuart &= ~EPLD2_ETH_AUTO_NEGO; + + /* put Ethernet+PHY in reset */ + x->ethuart &= ~EPLD2_RESET_ETH_N; + udelay(10000); + /* take Ethernet+PHY out of reset */ + x->ethuart |= EPLD2_RESET_ETH_N; return 0; } diff --git a/board/amcc/sequoia/cmd_sequoia.c b/board/amcc/sequoia/cmd_sequoia.c index f3803c0..6b9043a 100644 --- a/board/amcc/sequoia/cmd_sequoia.c +++ b/board/amcc/sequoia/cmd_sequoia.c @@ -25,6 +25,7 @@ #include <common.h> #include <command.h> #include <i2c.h> +#include <asm/io.h> /* * There are 2 versions of production Sequoia & Rainier platforms. @@ -39,7 +40,7 @@ * All Sequoias & Rainiers select from two possible EEPROMs in Boot * Config F. One for 33MHz PCI, one for 66MHz PCI. The following * values are for the 33MHz PCI configuration. Byte 5 (0 base) is - * the only value affected for a 66MHz PCI and simply needs a +0x10. + * the only value affected for a 33MHz PCI and simply needs a | 0x08. */ #define NAND_COMPATIBLE 0x01 @@ -56,6 +57,7 @@ static char *config_labels[] = { "CPU: 416 PLB: 166 OPB: 83 EBC: 55", "CPU: 500 PLB: 166 OPB: 83 EBC: 55", "CPU: 533 PLB: 133 OPB: 66 EBC: 66", + "CPU: 667 PLB: 133 OPB: 66 EBC: 66", "CPU: 667 PLB: 166 OPB: 83 EBC: 55", NULL }; @@ -97,6 +99,11 @@ static u8 boot_configs[][17] = { 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 }, { + (NOR_COMPATIBLE), + 0x87, 0x78, 0xa2, 0x56, 0x09, 0x57, 0xa0, 0x30, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { (NAND_COMPATIBLE | NOR_COMPATIBLE), 0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xa0, 0x30, 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 @@ -200,8 +207,12 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } /* check CPLD register +5 for PCI 66MHz flag */ - if (in8(CFG_BCSR_BASE + 5) & 0x01) - buf[5] += 0x10; + if ((in_8((void *)(CFG_BCSR_BASE + 5)) & CFG_BCSR5_PCI66EN) == 0) + /* + * PLB-to-PCI divisor = 3 for 33MHz sync PCI + * instead of 2 for 66MHz systems + */ + buf[5] |= 0x08; if (i2c_write(I2C_EEPROM_ADDR, 0, 1, buf, 16) != 0) printf("Error writing to EEPROM at address 0x%x\n", I2C_EEPROM_ADDR); diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index f823117..4e47ab3 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2006 + * (C) Copyright 2006-2007 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * (C) Copyright 2006 @@ -24,6 +24,7 @@ #include <common.h> #include <asm/processor.h> +#include <asm/io.h> #include <ppc440.h> DECLARE_GLOBAL_DATA_PTR; @@ -362,8 +363,8 @@ int checkboard(void) printf("Board: Rainier - AMCC PPC440GRx Evaluation Board"); #endif - rev = in8(CFG_BCSR_BASE + 0); - val = in8(CFG_BCSR_BASE + 5) & 0x01; + rev = in_8((void *)(CFG_BCSR_BASE + 0)); + val = in_8((void *)(CFG_BCSR_BASE + 5)) & CFG_BCSR5_PCI66EN; printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33); if (s != NULL) { diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c index 912f09e..6ec922a 100644 --- a/board/amcc/yosemite/yosemite.c +++ b/board/amcc/yosemite/yosemite.c @@ -1,4 +1,6 @@ /* + * (C) Copyright 2006-2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. * * See file CREDITS for list of people who contributed to this * project. @@ -22,6 +24,7 @@ #include <common.h> #include <ppc4xx.h> #include <asm/processor.h> +#include <asm/io.h> #include <spd_sdram.h> DECLARE_GLOBAL_DATA_PTR; @@ -181,8 +184,8 @@ int checkboard(void) printf("Board: Yellowstone - AMCC PPC440GR Evaluation Board"); #endif - rev = *(u8 *)(CFG_CPLD + 0); - val = *(u8 *)(CFG_CPLD + 5) & 0x01; + rev = in_8((void *)(CFG_BCSR_BASE + 0)); + val = in_8((void *)(CFG_BCSR_BASE + 5)) & CFG_BCSR5_PCI66EN; printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33); if (s != NULL) { |