diff options
Diffstat (limited to 'board/amcc/yucca/yucca.c')
| -rw-r--r-- | board/amcc/yucca/yucca.c | 30 |
1 files changed, 15 insertions, 15 deletions
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index 52486cc..11d1743 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -737,27 +737,27 @@ void yucca_setup_pcie_fpga_rootpoint(int port) case 0: rootpoint = FPGA_REG1C_PE0_ROOTPOINT; endpoint = 0; - power = FPGA_REG1A_PE0_PWRON; + power = FPGA_REG1A_PE0_PWRON; green_led = FPGA_REG1A_PE0_GLED; - clock = FPGA_REG1A_PE0_REFCLK_ENABLE; + clock = FPGA_REG1A_PE0_REFCLK_ENABLE; yellow_led = FPGA_REG1A_PE0_YLED; reset_off = FPGA_REG1C_PE0_PERST; break; case 1: rootpoint = 0; endpoint = FPGA_REG1C_PE1_ENDPOINT; - power = FPGA_REG1A_PE1_PWRON; + power = FPGA_REG1A_PE1_PWRON; green_led = FPGA_REG1A_PE1_GLED; - clock = FPGA_REG1A_PE1_REFCLK_ENABLE; + clock = FPGA_REG1A_PE1_REFCLK_ENABLE; yellow_led = FPGA_REG1A_PE1_YLED; reset_off = FPGA_REG1C_PE1_PERST; break; case 2: rootpoint = 0; endpoint = FPGA_REG1C_PE2_ENDPOINT; - power = FPGA_REG1A_PE2_PWRON; + power = FPGA_REG1A_PE2_PWRON; green_led = FPGA_REG1A_PE2_GLED; - clock = FPGA_REG1A_PE2_REFCLK_ENABLE; + clock = FPGA_REG1A_PE2_REFCLK_ENABLE; yellow_led = FPGA_REG1A_PE2_YLED; reset_off = FPGA_REG1C_PE2_PERST; break; @@ -794,27 +794,27 @@ void yucca_setup_pcie_fpga_endpoint(int port) case 0: rootpoint = FPGA_REG1C_PE0_ROOTPOINT; endpoint = 0; - power = FPGA_REG1A_PE0_PWRON; + power = FPGA_REG1A_PE0_PWRON; green_led = FPGA_REG1A_PE0_GLED; - clock = FPGA_REG1A_PE0_REFCLK_ENABLE; + clock = FPGA_REG1A_PE0_REFCLK_ENABLE; yellow_led = FPGA_REG1A_PE0_YLED; reset_off = FPGA_REG1C_PE0_PERST; break; case 1: rootpoint = 0; endpoint = FPGA_REG1C_PE1_ENDPOINT; - power = FPGA_REG1A_PE1_PWRON; + power = FPGA_REG1A_PE1_PWRON; green_led = FPGA_REG1A_PE1_GLED; - clock = FPGA_REG1A_PE1_REFCLK_ENABLE; + clock = FPGA_REG1A_PE1_REFCLK_ENABLE; yellow_led = FPGA_REG1A_PE1_YLED; reset_off = FPGA_REG1C_PE1_PERST; break; case 2: rootpoint = 0; endpoint = FPGA_REG1C_PE2_ENDPOINT; - power = FPGA_REG1A_PE2_PWRON; + power = FPGA_REG1A_PE2_PWRON; green_led = FPGA_REG1A_PE2_GLED; - clock = FPGA_REG1A_PE2_REFCLK_ENABLE; + clock = FPGA_REG1A_PE2_REFCLK_ENABLE; yellow_led = FPGA_REG1A_PE2_YLED; reset_off = FPGA_REG1C_PE2_PERST; break; @@ -884,21 +884,21 @@ void pcie_setup_hoses(int busno) /* * Reson for no scanning is endpoint can not generate * upstream configuration accesses. - */ + */ } else { ppc4xx_setup_pcie_rootpoint(hose, i); env = getenv("pciscandelay"); if (env != NULL) { delay = simple_strtoul(env, NULL, 10); if (delay > 5) - printf("Warning, expect noticable delay before " + printf("Warning, expect noticable delay before " "PCIe scan due to 'pciscandelay' value!\n"); mdelay(delay * 1000); } /* * Config access can only go down stream - */ + */ hose->last_busno = pci_hose_scan(hose); bus = hose->last_busno + 1; } |