diff options
Diffstat (limited to 'board/amcc/taishan/taishan.c')
| -rw-r--r-- | board/amcc/taishan/taishan.c | 22 |
1 files changed, 11 insertions, 11 deletions
diff --git a/board/amcc/taishan/taishan.c b/board/amcc/taishan/taishan.c index cd432cb..28bdab5 100644 --- a/board/amcc/taishan/taishan.c +++ b/board/amcc/taishan/taishan.c @@ -29,7 +29,7 @@ #include <ppc4xx_enet.h> #include <netdev.h> -#ifdef CFG_INIT_SHOW_RESET_REG +#ifdef CONFIG_SYS_INIT_SHOW_RESET_REG void show_reset_reg(void); #endif @@ -63,7 +63,7 @@ int board_early_init_f (void) EBC_BXAP_TH_ENCODE(3) | EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | EBC_BXAP_PEN_DISABLED); - mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CFG_FLASH_BASE) | + mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | EBC_BXCR_BS_64MB | EBC_BXCR_BU_RW|EBC_BXCR_BW_32BIT); /*-------------------------------------------------------------------------+ @@ -173,9 +173,9 @@ int board_early_init_f (void) mtsdr(sdr_pfc1,reg); /* Set GPIO 10 and 11 as output */ - GpioOdr = (volatile unsigned int*)(CFG_PERIPHERAL_BASE+0x718); - GpioTcr = (volatile unsigned int*)(CFG_PERIPHERAL_BASE+0x704); - GpioOr = (volatile unsigned int*)(CFG_PERIPHERAL_BASE+0x700); + GpioOdr = (volatile unsigned int*)(CONFIG_SYS_PERIPHERAL_BASE+0x718); + GpioTcr = (volatile unsigned int*)(CONFIG_SYS_PERIPHERAL_BASE+0x704); + GpioOr = (volatile unsigned int*)(CONFIG_SYS_PERIPHERAL_BASE+0x700); *GpioOdr &= ~(0x00300000); *GpioTcr |= 0x00300000; @@ -202,7 +202,7 @@ int checkboard (void) } putc ('\n'); -#ifdef CFG_INIT_SHOW_RESET_REG +#ifdef CONFIG_SYS_INIT_SHOW_RESET_REG show_reset_reg(); #endif @@ -248,7 +248,7 @@ int pci_pre_init(struct pci_controller * hose ) * may not be sufficient for a given board. * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) +#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) void pci_target_init(struct pci_controller * hose ) { /*--------------------------------------------------------------------------+ @@ -263,7 +263,7 @@ void pci_target_init(struct pci_controller * hose ) * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping * options to not support sizes such as 128/256 MB. *--------------------------------------------------------------------------*/ - out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE ); + out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); out32r( PCIX0_PIM0LAH, 0 ); out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 ); @@ -272,12 +272,12 @@ void pci_target_init(struct pci_controller * hose ) /*--------------------------------------------------------------------------+ * Program the board's subsystem id/vendor id *--------------------------------------------------------------------------*/ - out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID ); - out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID ); + out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); + out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY ); } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ +#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ /************************************************************************* * is_pci_host |