diff options
Diffstat (limited to 'board/amcc/makalu/makalu.c')
| -rw-r--r-- | board/amcc/makalu/makalu.c | 57 |
1 files changed, 11 insertions, 46 deletions
diff --git a/board/amcc/makalu/makalu.c b/board/amcc/makalu/makalu.c index 3b4a9c1..b7933a0 100644 --- a/board/amcc/makalu/makalu.c +++ b/board/amcc/makalu/makalu.c @@ -26,7 +26,8 @@ #include <ppc405.h> #include <libfdt.h> #include <asm/processor.h> -#include <asm-ppc/io.h> +#include <asm/gpio.h> +#include <asm/io.h> #if defined(CONFIG_PCI) #include <pci.h> @@ -189,6 +190,11 @@ int board_early_init_f (void) */ mtsdr(SDR0_SRST, 0); + /* Reset PCIe slots */ + gpio_write_bit(CFG_GPIO_PCIE_RST, 0); + udelay(100); + gpio_write_bit(CFG_GPIO_PCIE_RST, 1); + return 0; } @@ -239,45 +245,6 @@ int pci_pre_init(struct pci_controller * hose ) } #endif /* defined(CONFIG_PCI) */ -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller * hose ) -{ - /*-------------------------------------------------------------------+ - * Disable everything - *-------------------------------------------------------------------*/ - out32r( PCIX0_PIM0SA, 0 ); /* disable */ - out32r( PCIX0_PIM1SA, 0 ); /* disable */ - out32r( PCIX0_PIM2SA, 0 ); /* disable */ - out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */ - - /*-------------------------------------------------------------------+ - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 - * strapping options to not support sizes such as 128/256 MB. - *-------------------------------------------------------------------*/ - out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE ); - out32r( PCIX0_PIM0LAH, 0 ); - out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 ); - - out32r( PCIX0_BAR0, 0 ); - - /*-------------------------------------------------------------------+ - * Program the board's subsystem id/vendor id - *-------------------------------------------------------------------*/ - out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID ); - out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID ); - - out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY ); -} -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ - #ifdef CONFIG_PCI static struct pci_controller pcie_hose[2] = {{0},{0}}; @@ -292,15 +259,13 @@ void pcie_setup_hoses(int busno) for (i = 0; i < 2; i++) { - if (is_end_point(i)) { - printf("PCIE%d: will be configured as endpoint\n", i); + if (is_end_point(i)) ret = ppc4xx_init_pcie_endport(i); - } else { - printf("PCIE%d: will be configured as root-complex\n", i); + else ret = ppc4xx_init_pcie_rootport(i); - } if (ret) { - printf("PCIE%d: initialization failed\n", i); + printf("PCIE%d: initialization as %s failed\n", i, + is_end_point(i) ? "endpoint" : "root-complex"); continue; } |