diff options
Diffstat (limited to 'board/amcc/kilauea')
| -rw-r--r-- | board/amcc/kilauea/Makefile | 50 | ||||
| -rw-r--r-- | board/amcc/kilauea/cmd_pll.c | 297 | ||||
| -rw-r--r-- | board/amcc/kilauea/config.mk | 32 | ||||
| -rw-r--r-- | board/amcc/kilauea/init.S | 154 | ||||
| -rw-r--r-- | board/amcc/kilauea/kilauea.c | 392 | ||||
| -rw-r--r-- | board/amcc/kilauea/memory.c | 79 | ||||
| -rw-r--r-- | board/amcc/kilauea/u-boot-nand.lds | 137 | ||||
| -rw-r--r-- | board/amcc/kilauea/u-boot.lds | 137 |
8 files changed, 1278 insertions, 0 deletions
diff --git a/board/amcc/kilauea/Makefile b/board/amcc/kilauea/Makefile new file mode 100644 index 0000000..b8da25f --- /dev/null +++ b/board/amcc/kilauea/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2007 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o cmd_pll.o memory.o +SOBJS = init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend *~ + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/amcc/kilauea/cmd_pll.c b/board/amcc/kilauea/cmd_pll.c new file mode 100644 index 0000000..b2666dd --- /dev/null +++ b/board/amcc/kilauea/cmd_pll.c @@ -0,0 +1,297 @@ +/* + * (C) Copyright 2000, 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/* + * ehnus: change pll frequency. + * Wed Sep 5 11:45:17 CST 2007 + * hsun@udtech.com.cn + */ + + +#include <common.h> +#include <config.h> +#include <command.h> +#include <i2c.h> + +#ifdef CONFIG_CMD_EEPROM + +#define EEPROM_CONF_OFFSET 0 +#define EEPROM_TEST_OFFSET 16 +#define EEPROM_SDSTP_PARAM 16 + +#define PLL_NAME_MAX 12 +#define BUF_STEP 8 + +/* eeprom_wirtes 8Byte per op. */ +#define EEPROM_ALTER_FREQ(freq) \ + do { \ + int __i; \ + for (__i = 0; __i < 2; __i++) \ + eeprom_write (CFG_I2C_EEPROM_ADDR, \ + EEPROM_CONF_OFFSET + __i*BUF_STEP, \ + pll_select[freq], \ + BUF_STEP + __i*BUF_STEP); \ + } while (0) + +#define PDEBUG +#ifdef PDEBUG +#define PLL_DEBUG pll_debug(EEPROM_CONF_OFFSET) +#else +#define PLL_DEBUG +#endif + +typedef enum { + PLL_ebc20, + PLL_333, + PLL_4001, + PLL_4002, + PLL_533, + PLL_600, + PLL_666, /* For now, kilauea can't support */ + RCONF, + WTEST, + PLL_TOTAL +} pll_freq_t; + +static const char +pll_name[][PLL_NAME_MAX] = { + "PLL_ebc20", + "PLL_333", + "PLL_400@1", + "PLL_400@2", + "PLL_533", + "PLL_600", + "PLL_666", + "RCONF", + "WTEST", + "" +}; + +/* + * ehnus: + */ +static uchar +pll_select[][EEPROM_SDSTP_PARAM] = { + /* 0: CPU 333MHz EBC 20MHz, for test only */ + { + 0x8c, 0x12, 0xec, 0x12, 0x88, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + }, + + /* 0: 333 */ + { + 0x8c, 0x12, 0xec, 0x12, 0x98, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + }, + + /* 1: 400_266 */ + { + 0x8e, 0x0e, 0xe8, 0x13, 0x98, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + }, + + /* 2: 400 */ + { + 0x8e, 0x0e, 0xe8, 0x12, 0x98, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + }, + + /* 3: 533 */ + { + 0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + }, + + /* 4: 600 */ + { + 0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + }, + + /* 5: 666 */ + { + 0x8d, 0x03, 0x78, 0x13, 0x98, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + }, + + {} +}; + +static uchar +testbuf[EEPROM_SDSTP_PARAM] = { + 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, + 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff +}; + +static void +pll_debug(int off) +{ + int i; + uchar buffer[EEPROM_SDSTP_PARAM]; + + memset(buffer, 0, sizeof(buffer)); + eeprom_read(CFG_I2C_EEPROM_ADDR, off, + buffer, EEPROM_SDSTP_PARAM); + + printf("Debug: SDSTP[0-3] at offset \"0x%02x\" lists as follows: \n", off); + for (i = 0; i < EEPROM_SDSTP_PARAM; i++) + printf("%02x ", buffer[i]); + printf("\n"); +} + +static void +test_write(void) +{ + printf("Debug: test eeprom_write ... "); + + /* + * Write twice, 8 bytes per write + */ + eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET, + testbuf, 8); + eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8, + testbuf, 16); + printf("done\n"); + + pll_debug(EEPROM_TEST_OFFSET); +} + +int +do_pll_alter (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + char c = '\0'; + pll_freq_t pll_freq; + if (argc < 2) { + printf("Usage: \n%s\n", cmdtp->usage); + goto ret; + } + + for (pll_freq = PLL_ebc20; pll_freq < PLL_TOTAL; pll_freq++) + if (!strcmp(pll_name[pll_freq], argv[1])) + break; + + switch (pll_freq) { + case PLL_ebc20: + case PLL_333: + case PLL_4001: + case PLL_4002: + case PLL_533: + case PLL_600: + EEPROM_ALTER_FREQ(pll_freq); + break; + + case PLL_666: /* not support */ + printf("Choose this option will result in a boot failure." + "\nContinue? (Y/N): "); + + c = getc(); putc('\n'); + + if ((c == 'y') || (c == 'Y')) { + EEPROM_ALTER_FREQ(pll_freq); + break; + } + goto ret; + + case RCONF: + pll_debug(EEPROM_CONF_OFFSET); + goto ret; + case WTEST: + printf("DEBUG: write test\n"); + test_write(); + goto ret; + + default: + printf("Invalid options" + "\n\nUsage: \n%s\n", cmdtp->usage); + goto ret; + } + + printf("PLL set to %s, " + "reset the board to take effect\n", pll_name[pll_freq]); + + PLL_DEBUG; +ret: + return 0; +} + +U_BOOT_CMD( + pllalter, CFG_MAXARGS, 1, do_pll_alter, + "pllalter- change pll frequence \n", + "pllalter <selection> - change pll frequence \n\n\ + ** New freq take effect after reset. ** \n\ + ----------------------------------------------\n\ + PLL_ebc20: Board: AMCC 405EX(r) Evaluation Board\n\ + \t Same as PLL_333 \n\ + \t except \n\ + \t EBC: 20 MHz \n\ + ----------------------------------------------\n\ + PLL_333: Board: AMCC 405EX(r) Evaluation Board\n\ + \t VCO: 666 MHz \n\ + \t CPU: 333 MHz \n\ + \t PLB: 166 MHz \n\ + \t OPB: 83 MHz \n\ + \t DDR: 83 MHz \n\ + ------------------------------------------------\n\ + PLL_400@1: Board: AMCC 405EX(r) Evaluation Board\n\ + \t VCO: 800 MHz \n\ + \t CPU: 400 MHz \n\ + \t PLB: 133 MHz \n\ + \t OPB: 66 MHz \n\ + \t DDR: 133 MHz \n\ + ------------------------------------------------\n\ + PLL_400@2: Board: AMCC 405EX(r) Evaluation Board\n\ + \t VCO: 800 MHz \n\ + \t CPU: 400 MHz \n\ + \t PLB: 200 MHz \n\ + \t OPB: 100 MHz \n\ + \t DDR: 200 MHz \n\ + ----------------------------------------------\n\ + PLL_533: Board: AMCC 405EX(r) Evaluation Board\n\ + \t VCO: 1066 MHz \n\ + \t CPU: 533 MHz \n\ + \t PLB: 177 MHz \n\ + \t OPB: 88 MHz \n\ + \t DDR: 177 MHz \n\ + ----------------------------------------------\n\ + PLL_600: Board: AMCC 405EX(r) Evaluation Board\n\ + \t VCO: 1200 MHz \n\ + \t CPU: 600 MHz \n\ + \t PLB: 200 MHz \n\ + \t OPB: 100 MHz \n\ + \t DDR: 200 MHz \n\ + ----------------------------------------------\n\ + PLL_666: Board: AMCC 405EX(r) Evaluation Board\n\ + \t VCO: 1333 MHz \n\ + \t CPU: 666 MHz \n\ + \t PLB: 166 MHz \n\ + \t OPB: 83 MHz \n\ + \t DDR: 166 MHz \n\ + -----------------------------------------------\n\ + RCONF: Read current eeprom configuration. \n\ + -----------------------------------------------\n\ + WTEST: Test EEPROM write with predefined values\n\ + -----------------------------------------------\n" + ); + +#endif /* (CONFIG_COMMANDS & CFG_CMD_EEPROM) */ diff --git a/board/amcc/kilauea/config.mk b/board/amcc/kilauea/config.mk new file mode 100644 index 0000000..f5800eb --- /dev/null +++ b/board/amcc/kilauea/config.mk @@ -0,0 +1,32 @@ +# +# (C) Copyright 2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +ifndef TEXT_BASE +TEXT_BASE = 0xFFFA0000 +endif + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif diff --git a/board/amcc/kilauea/init.S b/board/amcc/kilauea/init.S new file mode 100644 index 0000000..4338744 --- /dev/null +++ b/board/amcc/kilauea/init.S @@ -0,0 +1,154 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * Based on code provided from UDTech and AMCC + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <ppc4xx.h> + +#include <ppc_asm.tmpl> +#include <ppc_defs.h> + +#define mtsdram_as(reg, value) \ + addi r4,0,reg ; \ + mtdcr memcfga,r4 ; \ + addis r4,0,value@h ; \ + ori r4,r4,value@l ; \ + mtdcr memcfgd,r4 ; + + .globl ext_bus_cntlr_init +ext_bus_cntlr_init: +#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) + + /* + * DDR2 setup + */ + + /* Following the DDR Core Manual, here is the initialization */ + + /* Step 1 */ + + /* Step 2 */ + + /* Step 3 */ + + /* base=00000000, size=256MByte (6), mode=7 (n*10*8) */ + mtsdram_as(SDRAM_MB0CF, 0x00006701); + + /* SET SDRAM_MB1CF - Not enabled */ + mtsdram_as(SDRAM_MB1CF, 0x00000000); + + /* SET SDRAM_MB2CF - Not enabled */ + mtsdram_as(SDRAM_MB2CF, 0x00000000); + + /* SET SDRAM_MB3CF - Not enabled */ + mtsdram_as(SDRAM_MB3CF, 0x00000000); + + /* SDRAM_CLKTR: Adv Addr clock by 90 deg */ + mtsdram_as(SDRAM_CLKTR, 0x80000000); + + /* Refresh Time register (0x30) Refresh every 7.8125uS */ + mtsdram_as(SDRAM_RTR, 0x06180000); + + /* SDRAM_SDTR1 */ + mtsdram_as(SDRAM_SDTR1, 0x80201000); + + /* SDRAM_SDTR2 */ + mtsdram_as(SDRAM_SDTR2, 0x32204232); + + /* SDRAM_SDTR3 */ + mtsdram_as(SDRAM_SDTR3, 0x080b0d1a); + + mtsdram_as(SDRAM_MMODE, 0x00000442); + mtsdram_as(SDRAM_MEMODE, 0x00000404); + + /* SDRAM0_MCOPT1 (0X20) No ECC Gen */ + mtsdram_as(SDRAM_MCOPT1, 0x04322000); + + /* NOP */ + mtsdram_as(SDRAM_INITPLR0, 0xa8380000); + /* precharge 3 DDR clock cycle */ + mtsdram_as(SDRAM_INITPLR1, 0x81900400); + /* EMR2 twr = 2tck */ + mtsdram_as(SDRAM_INITPLR2, 0x81020000); + /* EMR3 twr = 2tck */ + mtsdram_as(SDRAM_INITPLR3, 0x81030000); + /* EMR DLL ENABLE twr = 2tck */ + mtsdram_as(SDRAM_INITPLR4, 0x81010404); + /* MR w/ DLL reset + * Note: 5 is CL. May need to be changed + */ + mtsdram_as(SDRAM_INITPLR5, 0x81000542); + /* precharge 3 DDR clock cycle */ + mtsdram_as(SDRAM_INITPLR6, 0x81900400); + /* Auto-refresh trfc = 26tck */ + mtsdram_as(SDRAM_INITPLR7, 0x8D080000); + /* Auto-refresh trfc = 26tck */ + mtsdram_as(SDRAM_INITPLR8, 0x8D080000); + /* Auto-refresh */ + mtsdram_as(SDRAM_INITPLR9, 0x8D080000); + /* Auto-refresh */ + mtsdram_as(SDRAM_INITPLR10, 0x8D080000); + /* MRS - normal operation; wait 2 cycle (set wait to tMRD) */ + mtsdram_as(SDRAM_INITPLR11, 0x81000442); + mtsdram_as(SDRAM_INITPLR12, 0x81010780); + mtsdram_as(SDRAM_INITPLR13, 0x81010400); + mtsdram_as(SDRAM_INITPLR14, 0x00000000); + mtsdram_as(SDRAM_INITPLR15, 0x00000000); + + /* SET MCIF0_CODT Die Termination On */ + mtsdram_as(SDRAM_CODT, 0x0080f837); + mtsdram_as(SDRAM_MODT0, 0x01800000); + mtsdram_as(SDRAM_MODT1, 0x00000000); + + mtsdram_as(SDRAM_WRDTR, 0x00000000); + + /* SDRAM0_MCOPT2 (0X21) Start initialization */ + mtsdram_as(SDRAM_MCOPT2, 0x20000000); + + /* Step 5 */ + lis r3,0x1 /* 400000 = wait 100ms */ + mtctr r3 + +pll_wait: + bdnz pll_wait + + /* Step 6 */ + + /* SDRAM_DLCR */ + mtsdram_as(SDRAM_DLCR, 0x030000a5); + + /* SDRAM_RDCC */ + mtsdram_as(SDRAM_RDCC, 0x40000000); + + /* SDRAM_RQDC */ + mtsdram_as(SDRAM_RQDC, 0x80000038); + + /* SDRAM_RFDC */ + mtsdram_as(SDRAM_RFDC, 0x00000209); + + /* Enable memory controller */ + mtsdram_as(SDRAM_MCOPT2, 0x28000000); +#endif /* #ifndef CONFIG_NAND_U_BOOT */ + + blr diff --git a/board/amcc/kilauea/kilauea.c b/board/amcc/kilauea/kilauea.c new file mode 100644 index 0000000..2ee896a --- /dev/null +++ b/board/amcc/kilauea/kilauea.c @@ -0,0 +1,392 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <ppc4xx.h> +#include <ppc405.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <asm/processor.h> +#include <asm/io.h> + +#if defined(CONFIG_PCI) +#include <pci.h> +#include <asm/4xx_pcie.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +/* + * Board early initialization function + */ +int board_early_init_f (void) +{ + u32 val; + + /*--------------------------------------------------------------------+ + | Interrupt controller setup for the AMCC 405EX(r) PINE evaluation board. + +--------------------------------------------------------------------+ + +---------------------------------------------------------------------+ + |Interrupt| Source | Pol. | Sensi.| Crit. | + +---------+-----------------------------------+-------+-------+-------+ + | IRQ 00 | UART0 | High | Level | Non | + | IRQ 01 | UART1 | High | Level | Non | + | IRQ 02 | IIC0 | High | Level | Non | + | IRQ 03 | TBD | High | Level | Non | + | IRQ 04 | TBD | High | Level | Non | + | IRQ 05 | EBM | High | Level | Non | + | IRQ 06 | BGI | High | Level | Non | + | IRQ 07 | IIC1 | Rising| Edge | Non | + | IRQ 08 | SPI | High | Lvl/ed| Non | + | IRQ 09 | External IRQ 0 - (PCI-Express) | pgm H | Pgm | Non | + | IRQ 10 | MAL TX EOB | High | Level | Non | + | IRQ 11 | MAL RX EOB | High | Level | Non | + | IRQ 12 | DMA Channel 0 FIFO Full | High | Level | Non | + | IRQ 13 | DMA Channel 0 Stat FIFO | High | Level | Non | + | IRQ 14 | DMA Channel 1 FIFO Full | High | Level | Non | + | IRQ 15 | DMA Channel 1 Stat FIFO | High | Level | Non | + | IRQ 16 | PCIE0 AL | high | Level | Non | + | IRQ 17 | PCIE0 VPD access | rising| Edge | Non | + | IRQ 18 | PCIE0 hot reset request | rising| Edge | Non | + | IRQ 19 | PCIE0 hot reset request | faling| Edge | Non | + | IRQ 20 | PCIE0 TCR | High | Level | Non | + | IRQ 21 | PCIE0 MSI level0 | High | Level | Non | + | IRQ 22 | PCIE0 MSI level1 | High | Level | Non | + | IRQ 23 | Security EIP-94 | High | Level | Non | + | IRQ 24 | EMAC0 interrupt | High | Level | Non | + | IRQ 25 | EMAC1 interrupt | High | Level | Non | + | IRQ 26 | PCIE0 MSI level2 | High | Level | Non | + | IRQ 27 | External IRQ 4 | pgm H | Pgm | Non | + | IRQ 28 | UIC2 Non-critical Int. | High | Level | Non | + | IRQ 29 | UIC2 Critical Interrupt | High | Level | Crit. | + | IRQ 30 | UIC1 Non-critical Int. | High | Level | Non | + | IRQ 31 | UIC1 Critical Interrupt | High | Level | Crit. | + |---------------------------------------------------------------------- + | IRQ 32 | MAL Serr | High | Level | Non | + | IRQ 33 | MAL Txde | High | Level | Non | + | IRQ 34 | MAL Rxde | High | Level | Non | + | IRQ 35 | PCIE0 bus master VC0 |falling| Edge | Non | + | IRQ 36 | PCIE0 DCR Error | High | Level | Non | + | IRQ 37 | EBC | High |Lvl Edg| Non | + | IRQ 38 | NDFC | High | Level | Non | + | IRQ 39 | GPT Compare Timer 8 | Risin | Edge | Non | + | IRQ 40 | GPT Compare Timer 9 | Risin | Edge | Non | + | IRQ 41 | PCIE1 AL | high | Level | Non | + | IRQ 42 | PCIE1 VPD access | rising| edge | Non | + | IRQ 43 | PCIE1 hot reset request | rising| Edge | Non | + | IRQ 44 | PCIE1 hot reset request | faling| Edge | Non | + | IRQ 45 | PCIE1 TCR | High | Level | Non | + | IRQ 46 | PCIE1 bus master VC0 |falling| Edge | Non | + | IRQ 47 | GPT Compare Timer 3 | Risin | Edge | Non | + | IRQ 48 | GPT Compare Timer 4 | Risin | Edge | Non | + | IRQ 49 | Ext. IRQ 7 |pgm/Fal|pgm/Lvl| Non | + | IRQ 50 | Ext. IRQ 8 - |pgm (H)|pgm/Lvl| Non | + | IRQ 51 | Ext. IRQ 9 |pgm (H)|pgm/Lvl| Non | + | IRQ 52 | GPT Compare Timer 5 | high | Edge | Non | + | IRQ 53 | GPT Compare Timer 6 | high | Edge | Non | + | IRQ 54 | GPT Compare Timer 7 | high | Edge | Non | + | IRQ 55 | Serial ROM | High | Level | Non | + | IRQ 56 | GPT Decrement Pulse | High | Level | Non | + | IRQ 57 | Ext. IRQ 2 |pgm/Fal|pgm/Lvl| Non | + | IRQ 58 | Ext. IRQ 5 |pgm/Fal|pgm/Lvl| Non | + | IRQ 59 | Ext. IRQ 6 |pgm/Fal|pgm/Lvl| Non | + | IRQ 60 | EMAC0 Wake-up | High | Level | Non | + | IRQ 61 | Ext. IRQ 1 |pgm/Fal|pgm/Lvl| Non | + | IRQ 62 | EMAC1 Wake-up | High | Level | Non | + |---------------------------------------------------------------------- + | IRQ 64 | PE0 AL | High | Level | Non | + | IRQ 65 | PE0 VPD Access | Risin | Edge | Non | + | IRQ 66 | PE0 Hot Reset Request | Risin | Edge | Non | + | IRQ 67 | PE0 Hot Reset Request | Falli | Edge | Non | + | IRQ 68 | PE0 TCR | High | Level | Non | + | IRQ 69 | PE0 BusMaster VCO | Falli | Edge | Non | + | IRQ 70 | PE0 DCR Error | High | Level | Non | + | IRQ 71 | Reserved | N/A | N/A | Non | + | IRQ 72 | PE1 AL | High | Level | Non | + | IRQ 73 | PE1 VPD Access | Risin | Edge | Non | + | IRQ 74 | PE1 Hot Reset Request | Risin | Edge | Non | + | IRQ 75 | PE1 Hot Reset Request | Falli | Edge | Non | + | IRQ 76 | PE1 TCR | High | Level | Non | + | IRQ 77 | PE1 BusMaster VCO | Falli | Edge | Non | + | IRQ 78 | PE1 DCR Error | High | Level | Non | + | IRQ 79 | Reserved | N/A | N/A | Non | + | IRQ 80 | PE2 AL | High | Level | Non | + | IRQ 81 | PE2 VPD Access | Risin | Edge | Non | + | IRQ 82 | PE2 Hot Reset Request | Risin | Edge | Non | + | IRQ 83 | PE2 Hot Reset Request | Falli | Edge | Non | + | IRQ 84 | PE2 TCR | High | Level | Non | + | IRQ 85 | PE2 BusMaster VCO | Falli | Edge | Non | + | IRQ 86 | PE2 DCR Error | High | Level | Non | + | IRQ 87 | Reserved | N/A | N/A | Non | + | IRQ 88 | External IRQ(5) | Progr | Progr | Non | + | IRQ 89 | External IRQ 4 - Ethernet | Progr | Progr | Non | + | IRQ 90 | External IRQ 3 - PCI-X | Progr | Progr | Non | + | IRQ 91 | External IRQ 2 - PCI-X | Progr | Progr | Non | + | IRQ 92 | External IRQ 1 - PCI-X | Progr | Progr | Non | + | IRQ 93 | External IRQ 0 - PCI-X | Progr | Progr | Non | + | IRQ 94 | Reserved | N/A | N/A | Non | + | IRQ 95 | Reserved | N/A | N/A | Non | + |--------------------------------------------------------------------- + +---------+-----------------------------------+-------+-------+------*/ + /*--------------------------------------------------------------------+ + | Initialise UIC registers. Clear all interrupts. Disable all + | interrupts. + | Set critical interrupt values. Set interrupt polarities. Set + | interrupt trigger levels. Make bit 0 High priority. Clear all + | interrupts again. + +-------------------------------------------------------------------*/ + + mtdcr (uic2sr, 0xffffffff); /* Clear all interrupts */ + mtdcr (uic2er, 0x00000000); /* disable all interrupts */ + mtdcr (uic2cr, 0x00000000); /* Set Critical / Non Critical interrupts */ + mtdcr (uic2pr, 0xf7ffffff); /* Set Interrupt Polarities */ + mtdcr (uic2tr, 0x01e1fff8); /* Set Interrupt Trigger Levels */ + mtdcr (uic2vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ + mtdcr (uic2sr, 0x00000000); /* clear all interrupts */ + mtdcr (uic2sr, 0xffffffff); /* clear all interrupts */ + + mtdcr (uic1sr, 0xffffffff); /* Clear all interrupts */ + mtdcr (uic1er, 0x00000000); /* disable all interrupts */ + mtdcr (uic1cr, 0x00000000); /* Set Critical / Non Critical interrupts */ + mtdcr (uic1pr, 0xfffac785); /* Set Interrupt Polarities */ + mtdcr (uic1tr, 0x001d0040); /* Set Interrupt Trigger Levels */ + mtdcr (uic1vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ + mtdcr (uic1sr, 0x00000000); /* clear all interrupts */ + mtdcr (uic1sr, 0xffffffff); /* clear all interrupts */ + + mtdcr (uic0sr, 0xffffffff); /* Clear all interrupts */ + mtdcr (uic0er, 0x0000000a); /* Disable all interrupts */ + /* Except cascade UIC0 and UIC1 */ + mtdcr (uic0cr, 0x00000000); /* Set Critical / Non Critical interrupts */ + mtdcr (uic0pr, 0xffbfefef); /* Set Interrupt Polarities */ + mtdcr (uic0tr, 0x00007000); /* Set Interrupt Trigger Levels */ + mtdcr (uic0vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ + mtdcr (uic0sr, 0x00000000); /* clear all interrupts */ + mtdcr (uic0sr, 0xffffffff); /* clear all interrupts */ + + /* + * Note: Some cores are still in reset when the chip starts, so + * take them out of reset + */ + mtsdr(SDR0_SRST, 0); + + /* + * Configure FPGA register with PCIe reset + */ + out_be32((void *)CFG_FPGA_BASE, 0xff570cc0); /* assert PCIe reset */ + mdelay(50); + out_be32((void *)CFG_FPGA_BASE, 0xff570cc3); /* deassert PCIe reset */ + + /* Configure 405EX for NAND usage */ + val = SDR0_CUST0_MUX_NDFC_SEL | + SDR0_CUST0_NDFC_ENABLE | + SDR0_CUST0_NDFC_BW_8_BIT | + SDR0_CUST0_NRB_BUSY | + (0x80000000 >> (28 + CFG_NAND_CS)); + mtsdr(SDR0_CUST0, val); + + /* + * Configure PFC (Pin Function Control) registers + * -> Enable USB + */ + val = SDR0_PFC1_USBEN | SDR0_PFC1_USBBIGEN | SDR0_PFC1_GPT_FREQ; + mtsdr(SDR0_PFC1, val); + + return 0; +} + +int misc_init_r(void) +{ +#ifdef CFG_ENV_IS_IN_FLASH + /* Monitor protection ON by default */ + flash_protect(FLAG_PROTECT_SET, + -CFG_MONITOR_LEN, + 0xffffffff, + &flash_info[0]); +#endif + + return 0; +} + +int board_emac_count(void) +{ + u32 pvr = get_pvr(); + + /* + * 405EXr only has one EMAC interface, 405EX has two + */ + if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA)) + return 1; + else + return 2; +} + +static int board_pcie_count(void) +{ + u32 pvr = get_pvr(); + + /* + * 405EXr only has one EMAC interface, 405EX has two + */ + if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA)) + return 1; + else + return 2; +} + +int checkboard (void) +{ + char *s = getenv("serial#"); + u32 pvr = get_pvr(); + + if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA)) + printf("Board: Haleakala - AMCC PPC405EXr Evaluation Board"); + else + printf("Board: Kilauea - AMCC PPC405EX Evaluation Board"); + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + putc('\n'); + + return (0); +} + +/************************************************************************* + * pci_pre_init + * + * This routine is called just prior to registering the hose and gives + * the board the opportunity to check things. Returning a value of zero + * indicates that things are bad & PCI initialization should be aborted. + * + * Different boards may wish to customize the pci controller structure + * (add regions, override default access routines, etc) or perform + * certain pre-initialization actions. + * + ************************************************************************/ +#if defined(CONFIG_PCI) +int pci_pre_init(struct pci_controller * hose ) +{ + return 0; +} +#endif /* defined(CONFIG_PCI) */ + +#ifdef CONFIG_PCI +static struct pci_controller pcie_hose[2] = {{0},{0}}; + +void pcie_setup_hoses(int busno) +{ + struct pci_controller *hose; + int i, bus; + int ret = 0; + bus = busno; + char *env; + unsigned int delay; + + for (i = 0; i < board_pcie_count(); i++) { + + if (is_end_point(i)) + ret = ppc4xx_init_pcie_endport(i); + else + ret = ppc4xx_init_pcie_rootport(i); + if (ret) { + printf("PCIE%d: initialization as %s failed\n", i, + is_end_point(i) ? "endpoint" : "root-complex"); + continue; + } + + hose = &pcie_hose[i]; + hose->first_busno = bus; + hose->last_busno = bus; + hose->current_busno = bus; + + /* setup mem resource */ + pci_set_region(hose->regions + 0, + CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE, + CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE, + CFG_PCIE_MEMSIZE, + PCI_REGION_MEM); + hose->region_count = 1; + pci_register_hose(hose); + + if (is_end_point(i)) { + ppc4xx_setup_pcie_endpoint(hose, i); + /* + * Reson for no scanning is endpoint can not generate + * upstream configuration accesses. + */ + } else { + ppc4xx_setup_pcie_rootpoint(hose, i); + env = getenv ("pciscandelay"); + if (env != NULL) { + delay = simple_strtoul(env, NULL, 10); + if (delay > 5) + printf("Warning, expect noticable delay before " + "PCIe scan due to 'pciscandelay' value!\n"); + mdelay(delay * 1000); + } + + /* + * Config access can only go down stream + */ + hose->last_busno = pci_hose_scan(hose); + bus = hose->last_busno + 1; + } + } +} +#endif + +#if defined(CONFIG_POST) +/* + * Returns 1 if keys pressed to start the power-on long-running tests + * Called from board_init_f(). + */ +int post_hotkeys_pressed(void) +{ + return 0; /* No hotkeys supported */ +} +#endif /* CONFIG_POST */ + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + u32 val[4]; + int rc; + + ft_cpu_setup(blob, bd); + + /* Fixup NOR mapping */ + val[0] = 0; /* chip select number */ + val[1] = 0; /* always 0 */ + val[2] = gd->bd->bi_flashstart; + val[3] = gd->bd->bi_flashsize; + rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", + val, sizeof(val), 1); + if (rc) + printf("Unable to update property NOR mapping, err=%s\n", + fdt_strerror(rc)); +} +#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/amcc/kilauea/memory.c b/board/amcc/kilauea/memory.c new file mode 100644 index 0000000..1d7a3fa --- /dev/null +++ b/board/amcc/kilauea/memory.c @@ -0,0 +1,79 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/processor.h> +#include <i2c.h> + +void sdram_init(void) +{ + return; +} + +long int initdram(int board_type) +{ + return (CFG_MBYTES_SDRAM << 20); +} + +#if defined(CFG_DRAM_TEST) +int testdram (void) +{ + printf ("testdram\n"); +#if defined (CONFIG_NAND_U_BOOT) + return 0; +#endif + uint *pstart = (uint *) 0x00000000; + uint *pend = (uint *) 0x00001000; + uint *p; + + for (p = pstart; p < pend; p++) { + *p = 0xaaaaaaaa; + } + + for (p = pstart; p < pend; p++) { + if (*p != 0xaaaaaaaa) { +#if !defined (CONFIG_NAND_SPL) + printf ("SDRAM test fails at: %08x\n", (uint) p); +#endif + return 1; + } + } + + for (p = pstart; p < pend; p++) { + *p = 0x55555555; + } + + for (p = pstart; p < pend; p++) { + if (*p != 0x55555555) { +#if !defined (CONFIG_NAND_SPL) + printf ("SDRAM test fails at: %08x\n", (uint) p); +#endif + return 1; + } + } +#if !defined (CONFIG_NAND_SPL) + printf ("SDRAM test passed!!!\n"); +#endif + return 0; +} +#endif diff --git a/board/amcc/kilauea/u-boot-nand.lds b/board/amcc/kilauea/u-boot-nand.lds new file mode 100644 index 0000000..27dfe08 --- /dev/null +++ b/board/amcc/kilauea/u-boot-nand.lds @@ -0,0 +1,137 @@ +/* + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + + /* Align to next NAND block */ + . = ALIGN(0x4000); + common/environment.o (.ppcenv) + /* Keep some space here for redundant env and potential bad env blocks */ + . = ALIGN(0x10000); + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss (NOLOAD) : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + + _end = . ; + PROVIDE (end = .); +} diff --git a/board/amcc/kilauea/u-boot.lds b/board/amcc/kilauea/u-boot.lds new file mode 100644 index 0000000..1f7653d --- /dev/null +++ b/board/amcc/kilauea/u-boot.lds @@ -0,0 +1,137 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ +/* To compile successfully, uncomment the following section. + * To go in ram, remove the section. + * Added by SunHe. + */ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/ppc4xx/start.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss (NOLOAD) : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} |