diff options
Diffstat (limited to 'board/amcc/bamboo/bamboo.h')
| -rw-r--r-- | board/amcc/bamboo/bamboo.h | 401 |
1 files changed, 401 insertions, 0 deletions
diff --git a/board/amcc/bamboo/bamboo.h b/board/amcc/bamboo/bamboo.h new file mode 100644 index 0000000..612e9af --- /dev/null +++ b/board/amcc/bamboo/bamboo.h @@ -0,0 +1,401 @@ +/* + * (C) Copyright 2005 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/*----------------------------------------------------------------------------+ + | FPGA registers and bit definitions + +----------------------------------------------------------------------------*/ +/* + * PowerPC 440EP Board FPGA is reached with physical address 0x80001FF0. + * TLB initialization makes it correspond to logical address 0x80001FF0. + * => Done init_chip.s in bootlib + */ +#define FPGA_BASE_ADDR 0x80002000 + +/*----------------------------------------------------------------------------+ + | Board Jumpers Setting Register + | Board Settings provided by jumpers + +----------------------------------------------------------------------------*/ +#define FPGA_SETTING_REG (FPGA_BASE_ADDR+0x3) +/* Boot from small flash */ +#define FPGA_SET_REG_BOOT_SMALL_FLASH 0x80 +/* Operational Flash versus SRAM position in Memory Map */ +#define FPGA_SET_REG_OP_CODE_SRAM_SEL_MASK 0x40 +#define FPGA_SET_REG_OP_CODE_FLASH_ABOVE 0x40 +#define FPGA_SET_REG_SRAM_ABOVE 0x00 +/* Boot From NAND Flash */ +#define FPGA_SET_REG_BOOT_NAND_FLASH_MASK 0x40 +#define FPGA_SET_REG_BOOT_NAND_FLASH_SELECT 0x00 +/* On Board PCI Arbiter Select */ +#define FPGA_SET_REG_PCI_EXT_ARBITER_SEL_MASK 0x10 +#define FPGA_SET_REG_PCI_EXT_ARBITER_SEL 0x00 + +/*----------------------------------------------------------------------------+ + | Functions Selection Register 1 + +----------------------------------------------------------------------------*/ +#define FPGA_SELECTION_1_REG (FPGA_BASE_ADDR+0x4) +#define FPGA_SEL_1_REG_PHY_MASK 0xE0 +#define FPGA_SEL_1_REG_MII 0x80 +#define FPGA_SEL_1_REG_RMII 0x40 +#define FPGA_SEL_1_REG_SMII 0x20 +#define FPGA_SEL_1_REG_USB2_DEV_SEL 0x10 /* USB2 Device Selection */ +#define FPGA_SEL_1_REG_USB2_HOST_SEL 0x08 /* USB2 Host Selection */ +#define FPGA_SEL_1_REG_NF_SELEC_MASK 0x07 /* NF Selection Mask */ +#define FPGA_SEL_1_REG_NF0_SEL_BY_NFCS1 0x04 /* NF0 Selected by NF_CS1 */ +#define FPGA_SEL_1_REG_NF1_SEL_BY_NFCS2 0x02 /* NF1 Selected by NF_CS2 */ +#define FPGA_SEL_1_REG_NF1_SEL_BY_NFCS3 0x01 /* NF1 Selected by NF_CS3 */ + +/*----------------------------------------------------------------------------+ + | Functions Selection Register 2 + +----------------------------------------------------------------------------*/ +#define FPGA_SELECTION_2_REG (FPGA_BASE_ADDR+0x5) +#define FPGA_SEL2_REG_IIC1_SCP_SEL_MASK 0x80 /* IIC1 / SCP Selection */ +#define FPGA_SEL2_REG_SEL_FRAM 0x80 /* FRAM on IIC1 bus selected - SCP Select */ +#define FPGA_SEL2_REG_SEL_SCP 0x80 /* Identical to SCP Selection */ +#define FPGA_SEL2_REG_SEL_IIC1 0x00 /* IIC1 Selection - Default Value */ +#define FPGA_SEL2_REG_SEL_DMA_A_B 0x40 /* DMA A & B channels selected */ +#define FPGA_SEL2_REG_SEL_DMA_C_D 0x20 /* DMA C & D channels selected */ +#define FPGA_SEL2_REG_DMA_EOT_TC_3_SEL 0x10 /* 0 = EOT - input to 440EP */ + /* 1 = TC - output from 440EP */ +#define FPGA_SEL2_REG_DMA_EOT_TC_2_SEL 0x08 /* 0 = EOT (input to 440EP) */ + /* 1 = TC (output from 440EP) */ +#define FPGA_SEL2_REG_SEL_GPIO_1 0x04 /* EBC_GPIO & USB2_GPIO selected */ +#define FPGA_SEL2_REG_SEL_GPIO_2 0x02 /* Ether._GPIO & UART_GPIO selected */ +#define FPGA_SEL2_REG_SEL_GPIO_3 0x01 /* DMA_GPIO & Trace_GPIO selected */ + +/*----------------------------------------------------------------------------+ + | Functions Selection Register 3 + +----------------------------------------------------------------------------*/ +#define FPGA_SELECTION_3_REG (FPGA_BASE_ADDR+0x6) +#define FPGA_SEL3_REG_EXP_SLOT_EN 0x80 /* Expansion Slot enabled */ +#define FPGA_SEL3_REG_SEL_UART_CONFIG_MASK 0x70 +#define FPGA_SEL3_REG_SEL_UART_CONFIG1 0x40 /* one 8_pin UART */ +#define FPGA_SEL3_REG_SEL_UART_CONFIG2 0x20 /* two 4_pin UARTs */ +#define FPGA_SEL3_REG_SEL_UART_CONFIG3 0x10 /* one 4_pin & two 2_pin UARTs */ +#define FPGA_SEL3_REG_SEL_UART_CONFIG4 0x08 /* four 2_pin UARTs */ +#define FPGA_SEL3_REG_DTR_DSR_MODE_4_PIN_UART 0x00 /* DTR/DSR mode for 4_pin_UART */ +#define FPGA_SEL3_REG_RTS_CTS_MODE_4_PIN_UART 0x04 /* RTS/CTS mode for 4_pin_UART */ + +/*----------------------------------------------------------------------------+ + | Soft Reset Register + +----------------------------------------------------------------------------*/ +#define FPGA_RESET_REG (FPGA_BASE_ADDR+0x7) +#define FPGA_RESET_REG_RESET_USB20_DEV 0x80 /* Hard Reset of the GT3200 */ +#define FPGA_RESET_REG_RESET_DISPLAY 0x40 /* Hard Reset on Display Device */ +#define FPGA_RESET_REG_STATUS_LED_0 0x08 /* 1 = Led On */ +#define FPGA_RESET_REG_STATUS_LED_1 0x04 /* 1 = Led On */ +#define FPGA_RESET_REG_STATUS_LED_2 0x02 /* 1 = Led On */ +#define FPGA_RESET_REG_STATUS_LED_3 0x01 /* 1 = Led On */ + + +/*----------------------------------------------------------------------------+ +| SDR Configuration registers ++----------------------------------------------------------------------------*/ +/* Serial Device Strap Reg 0 */ +#define SDR0_SDSTP0 0x0020 +/* Serial Device Strap Reg 1 */ +#define SDR0_SDSTP1 0x0021 +/* Serial Device Strap Reg 2 */ +#define SDR0_SDSTP2 SDR0_STRP2 +/* Serial Device Strap Reg 3 */ +#define SDR0_SDSTP3 SDR0_STRP3 + +#define sdr_pstrp0 0x0040 + +#define SDR0_SDSTP1_EBC_ROM_BS_MASK 0x00006000 /* EBC Boot Size Mask */ +#define SDR0_SDSTP1_EBC_ROM_BS_32BIT 0x00004000 /* EBC 32 bits */ +#define SDR0_SDSTP1_EBC_ROM_BS_16BIT 0x00002000 /* EBC 16 Bits */ +#define SDR0_SDSTP1_EBC_ROM_BS_8BIT 0x00000000 /* EBC 8 Bits */ + +#define SDR0_SDSTP1_BOOT_SEL_MASK 0x00001800 /* Boot device Selection Mask */ +#define SDR0_SDSTP1_BOOT_SEL_EBC 0x00000000 /* EBC */ +#define SDR0_SDSTP1_BOOT_SEL_PCI 0x00000800 /* PCI */ +#define SDR0_SDSTP1_BOOT_SEL_NDFC 0x00001000 /* NDFC */ + +/* Serial Device Enabled - Addr = 0xA8 */ +#define SDR0_PSTRP0_BOOTSTRAP_IIC_A8_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS5 +/* Serial Device Enabled - Addr = 0xA4 */ +#define SDR0_PSTRP0_BOOTSTRAP_IIC_A4_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS7 + +/* Pin Straps Reg */ +#define SDR0_PSTRP0 0x0040 +#define SDR0_PSTRP0_BOOTSTRAP_MASK 0xE0000000 /* Strap Bits */ + +#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS0 0x00000000 /* Default strap settings 0 */ +#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS1 0x20000000 /* Default strap settings 1 */ +#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS2 0x40000000 /* Default strap settings 2 */ +#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS3 0x60000000 /* Default strap settings 3 */ +#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS4 0x80000000 /* Default strap settings 4 */ +#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS5 0xA0000000 /* Default strap settings 5 */ +#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS6 0xC0000000 /* Default strap settings 6 */ +#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS7 0xE0000000 /* Default strap settings 7 */ + +/*----------------------------------------------------------------------------+ +| EBC Configuration Register - EBC0_CFG ++----------------------------------------------------------------------------*/ +/* External Bus Three-State Control */ +#define EBC0_CFG_EBTC_DRIVEN 0x80000000 +/* Device-Paced Time-out Disable */ +#define EBC0_CFG_PTD_ENABLED 0x00000000 +/* Ready Timeout Count */ +#define EBC0_CFG_RTC_MASK 0x38000000 +#define EBC0_CFG_RTC_16PERCLK 0x00000000 +#define EBC0_CFG_RTC_32PERCLK 0x08000000 +#define EBC0_CFG_RTC_64PERCLK 0x10000000 +#define EBC0_CFG_RTC_128PERCLK 0x18000000 +#define EBC0_CFG_RTC_256PERCLK 0x20000000 +#define EBC0_CFG_RTC_512PERCLK 0x28000000 +#define EBC0_CFG_RTC_1024PERCLK 0x30000000 +#define EBC0_CFG_RTC_2048PERCLK 0x38000000 +/* External Master Priority Low */ +#define EBC0_CFG_EMPL_LOW 0x00000000 +#define EBC0_CFG_EMPL_MEDIUM_LOW 0x02000000 +#define EBC0_CFG_EMPL_MEDIUM_HIGH 0x04000000 +#define EBC0_CFG_EMPL_HIGH 0x06000000 +/* External Master Priority High */ +#define EBC0_CFG_EMPH_LOW 0x00000000 +#define EBC0_CFG_EMPH_MEDIUM_LOW 0x00800000 +#define EBC0_CFG_EMPH_MEDIUM_HIGH 0x01000000 +#define EBC0_CFG_EMPH_HIGH 0x01800000 +/* Chip Select Three-State Control */ +#define EBC0_CFG_CSTC_DRIVEN 0x00400000 +/* Burst Prefetch */ +#define EBC0_CFG_BPF_ONEDW 0x00000000 +#define EBC0_CFG_BPF_TWODW 0x00100000 +#define EBC0_CFG_BPF_FOURDW 0x00200000 +/* External Master Size */ +#define EBC0_CFG_EMS_8BIT 0x00000000 +/* Power Management Enable */ +#define EBC0_CFG_PME_DISABLED 0x00000000 +#define EBC0_CFG_PME_ENABLED 0x00020000 +/* Power Management Timer */ +#define EBC0_CFG_PMT_ENCODE(n) ((((unsigned long)(n))&0x1F)<<12) + +/*----------------------------------------------------------------------------+ +| Peripheral Bank Configuration Register - EBC0_BnCR ++----------------------------------------------------------------------------*/ +/* BAS - Base Address Select */ +#define EBC0_BNCR_BAS_ENCODE(n) ((((unsigned long)(n))&0xFFF00000)<<0) +/* BS - Bank Size */ +#define EBC0_BNCR_BS_MASK 0x000E0000 +#define EBC0_BNCR_BS_1MB 0x00000000 +#define EBC0_BNCR_BS_2MB 0x00020000 +#define EBC0_BNCR_BS_4MB 0x00040000 +#define EBC0_BNCR_BS_8MB 0x00060000 +#define EBC0_BNCR_BS_16MB 0x00080000 +#define EBC0_BNCR_BS_32MB 0x000A0000 +#define EBC0_BNCR_BS_64MB 0x000C0000 +#define EBC0_BNCR_BS_128MB 0x000E0000 +/* BU - Bank Usage */ +#define EBC0_BNCR_BU_MASK 0x00018000 +#define EBC0_BNCR_BU_RO 0x00008000 +#define EBC0_BNCR_BU_WO 0x00010000 +#define EBC0_BNCR_BU_RW 0x00018000 +/* BW - Bus Width */ +#define EBC0_BNCR_BW_MASK 0x00006000 +#define EBC0_BNCR_BW_8BIT 0x00000000 +#define EBC0_BNCR_BW_16BIT 0x00002000 +#define EBC0_BNCR_BW_32BIT 0x00004000 + +/*----------------------------------------------------------------------------+ +| Peripheral Bank Access Parameters - EBC0_BnAP ++----------------------------------------------------------------------------*/ +/* Burst Mode Enable */ +#define EBC0_BNAP_BME_ENABLED 0x80000000 +#define EBC0_BNAP_BME_DISABLED 0x00000000 +/* Transfert Wait */ +#define EBC0_BNAP_TWT_ENCODE(n) ((((unsigned long)(n))&0xFF)<<23) /* Bits 1:8 */ +/* Chip Select On Timing */ +#define EBC0_BNAP_CSN_ENCODE(n) ((((unsigned long)(n))&0x3)<<18) /* Bits 12:13 */ +/* Output Enable On Timing */ +#define EBC0_BNAP_OEN_ENCODE(n) ((((unsigned long)(n))&0x3)<<16) /* Bits 14:15 */ +/* Write Back Enable On Timing */ +#define EBC0_BNAP_WBN_ENCODE(n) ((((unsigned long)(n))&0x3)<<14) /* Bits 16:17 */ +/* Write Back Enable Off Timing */ +#define EBC0_BNAP_WBF_ENCODE(n) ((((unsigned long)(n))&0x3)<<12) /* Bits 18:19 */ +/* Transfert Hold */ +#define EBC0_BNAP_TH_ENCODE(n) ((((unsigned long)(n))&0x7)<<9) /* Bits 20:22 */ +/* PerReady Enable */ +#define EBC0_BNAP_RE_ENABLED 0x00000100 +#define EBC0_BNAP_RE_DISABLED 0x00000000 +/* Sample On Ready */ +#define EBC0_BNAP_SOR_DELAYED 0x00000000 +#define EBC0_BNAP_SOR_NOT_DELAYED 0x00000080 +/* Byte Enable Mode */ +#define EBC0_BNAP_BEM_WRITEONLY 0x00000000 +#define EBC0_BNAP_BEM_RW 0x00000040 +/* Parity Enable */ +#define EBC0_BNAP_PEN_DISABLED 0x00000000 +#define EBC0_BNAP_PEN_ENABLED 0x00000020 + +/*----------------------------------------------------------------------------+ +| Define Boot devices ++----------------------------------------------------------------------------*/ +/* */ +#define BOOT_FROM_SMALL_FLASH 0x00 +#define BOOT_FROM_LARGE_FLASH_OR_SRAM 0x01 +#define BOOT_FROM_NAND_FLASH0 0x02 +#define BOOT_FROM_PCI 0x03 +#define BOOT_DEVICE_UNKNOWN 0x04 + + +#define PVR_POWERPC_440EP_PASS1 0x42221850 +#define PVR_POWERPC_440EP_PASS2 0x422218D3 + +#define TRUE 1 +#define FALSE 0 + +#define GPIO_GROUP_MAX 2 +#define GPIO_MAX 32 +#define GPIO_ALT1_SEL 0x40000000 /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 0 */ +#define GPIO_ALT2_SEL 0x80000000 /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 1 */ +#define GPIO_ALT3_SEL 0xC0000000 /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 2 */ +#define GPIO_MASK 0xC0000000 /* GPIO_MASK */ +#define GPIO_IN_SEL 0x40000000 /* GPIO_IN value put in GPIO_ISx for the GPIO nb 0 */ + /* For the other GPIO number, you must shift */ + +#define GPIO0 0 +#define GPIO1 1 + + +/*#define MAX_SELECTION_NB CORE_NB */ +#define MAX_CORE_SELECT_NB 22 + +/*----------------------------------------------------------------------------+ + | PPC440EP GPIOs addresses. + +----------------------------------------------------------------------------*/ +#define GPIO0_BASE 0xEF600B00 +#define GPIO0_REAL 0xEF600B00 + +#define GPIO1_BASE 0xEF600C00 +#define GPIO1_REAL 0xEF600C00 + +/* Offsets */ +#define GPIOx_OR 0x00 /* GPIO Output Register */ +#define GPIOx_TCR 0x04 /* GPIO Three-State Control Register */ +#define GPIOx_OSL 0x08 /* GPIO Output Select Register (Bits 0-31) */ +#define GPIOx_OSH 0x0C /* GPIO Ouput Select Register (Bits 32-63) */ +#define GPIOx_TSL 0x10 /* GPIO Three-State Select Register (Bits 0-31) */ +#define GPIOx_TSH 0x14 /* GPIO Three-State Select Register (Bits 32-63) */ +#define GPIOx_ODR 0x18 /* GPIO Open drain Register */ +#define GPIOx_IR 0x1C /* GPIO Input Register */ +#define GPIOx_RR1 0x20 /* GPIO Receive Register 1 */ +#define GPIOx_RR2 0x24 /* GPIO Receive Register 2 */ +#define GPIOx_RR3 0x28 /* GPIO Receive Register 3 */ +#define GPIOx_IS1L 0x30 /* GPIO Input Select Register 1 (Bits 0-31) */ +#define GPIOx_IS1H 0x34 /* GPIO Input Select Register 1 (Bits 32-63) */ +#define GPIOx_IS2L 0x38 /* GPIO Input Select Register 2 (Bits 0-31) */ +#define GPIOx_IS2H 0x3C /* GPIO Input Select Register 2 (Bits 32-63) */ +#define GPIOx_IS3L 0x40 /* GPIO Input Select Register 3 (Bits 0-31) */ +#define GPIOx_IS3H 0x44 /* GPIO Input Select Register 3 (Bits 32-63) */ + +/* GPIO0 */ +#define GPIO0_IS1L (GPIO0_BASE+GPIOx_IS1L) +#define GPIO0_IS1H (GPIO0_BASE+GPIOx_IS1H) +#define GPIO0_IS2L (GPIO0_BASE+GPIOx_IS2L) +#define GPIO0_IS2H (GPIO0_BASE+GPIOx_IS2H) +#define GPIO0_IS3L (GPIO0_BASE+GPIOx_IS3L) +#define GPIO0_IS3H (GPIO0_BASE+GPIOx_IS3L) + +/* GPIO1 */ +#define GPIO1_IS1L (GPIO1_BASE+GPIOx_IS1L) +#define GPIO1_IS1H (GPIO1_BASE+GPIOx_IS1H) +#define GPIO1_IS2L (GPIO1_BASE+GPIOx_IS2L) +#define GPIO1_IS2H (GPIO1_BASE+GPIOx_IS2H) +#define GPIO1_IS3L (GPIO1_BASE+GPIOx_IS3L) +#define GPIO1_IS3H (GPIO1_BASE+GPIOx_IS3L) + +#define GPIO_OS(x) (x+GPIOx_OSL) /* GPIO Output Register High or Low */ +#define GPIO_TS(x) (x+GPIOx_TSL) /* GPIO Three-state Control Reg High or Low */ +#define GPIO_IS1(x) (x+GPIOx_IS1L) /* GPIO Input register1 High or Low */ +#define GPIO_IS2(x) (x+GPIOx_IS2L) /* GPIO Input register2 High or Low */ +#define GPIO_IS3(x) (x+GPIOx_IS3L) /* GPIO Input register3 High or Low */ + + +/*----------------------------------------------------------------------------+ + | Declare Configuration values + +----------------------------------------------------------------------------*/ +typedef enum gpio_select { GPIO_SEL, GPIO_ALT1, GPIO_ALT2, GPIO_ALT3 } gpio_select_t; +typedef enum gpio_driver { GPIO_DIS, GPIO_IN, GPIO_OUT, GPIO_BI } gpio_driver_t; + +typedef struct { unsigned long add; /* gpio core base address */ + gpio_driver_t in_out; /* Driver Setting */ + gpio_select_t alt_nb; /* Selected Alternate */ +} gpio_param_s; + +/*----------------------------------------------------------------------------+ + | XX XX + | + | XXXXXX XXX XX XXX XXX + | XX XX X XX XX XX + | XX XX X XX XX XX + | XX XX XX XX XX + | XXXXXX XXX XXX XXXX XXXX + +----------------------------------------------------------------------------*/ +/*----------------------------------------------------------------------------+ + | Defines + +----------------------------------------------------------------------------*/ +typedef enum zmii_config { ZMII_CONFIGURATION_UNKNOWN, + ZMII_CONFIGURATION_IS_MII, + ZMII_CONFIGURATION_IS_RMII, + ZMII_CONFIGURATION_IS_SMII +} zmii_config_t; + +/*----------------------------------------------------------------------------+ + | Declare Configuration values + +----------------------------------------------------------------------------*/ +typedef enum uart_config_nb { L1, L2, L3, L4 } uart_config_nb_t; +typedef enum core_selection { CORE_NOT_SELECTED, CORE_SELECTED} core_selection_t; +typedef enum config_list { IIC_CORE, + SCP_CORE, + DMA_CHANNEL_AB, + UIC_4_9, + USB2_HOST, + DMA_CHANNEL_CD, + USB2_DEVICE, + PACKET_REJ_FUNC_AVAIL, + USB1_DEVICE, + EBC_MASTER, + NAND_FLASH, + UART_CORE0, + UART_CORE1, + UART_CORE2, + UART_CORE3, + MII_SEL, + RMII_SEL, + SMII_SEL, + PACKET_REJ_FUNC_EN, + UIC_0_3, + USB1_HOST, + PCI_PATCH, + CORE_NB +} core_list_t; + +typedef enum block3_value { B3_V1, B3_V2, B3_V3, B3_V4, B3_V5, + B3_V6, B3_V7, B3_V8, B3_V9, B3_V10, + B3_V11, B3_V12, B3_V13, B3_V14, B3_V15, + B3_V16, B3_VALUE_UNKNOWN +} block3_value_t; + +typedef enum config_validity { CONFIG_IS_VALID, + CONFIG_IS_INVALID +} config_validity_t; |