summaryrefslogtreecommitdiff
path: root/board/actux1/actux1.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/actux1/actux1.c')
-rw-r--r--board/actux1/actux1.c148
1 files changed, 0 insertions, 148 deletions
diff --git a/board/actux1/actux1.c b/board/actux1/actux1.c
deleted file mode 100644
index 03ccd93..0000000
--- a/board/actux1/actux1.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * (C) Copyright 2007
- * Michael Schwingen, michael@schwingen.org
- *
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <malloc.h>
-#include <asm/arch/ixp425.h>
-#include <asm/io.h>
-#include <miiphy.h>
-#ifdef CONFIG_PCI
-#include <pci.h>
-#include <asm/arch/ixp425pci.h>
-#endif
-
-#include "actux1_hw.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
- /* CS5: Debug port */
- writel(0x9d520003, IXP425_EXP_CS5);
- /* CS6: HwRel */
- writel(0x81860001, IXP425_EXP_CS6);
- /* CS7: LEDs */
- writel(0x80900003, IXP425_EXP_CS7);
- return 0;
-}
-
-int board_init(void)
-{
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x00000100;
-
- GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST);
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_IORST);
-
- /* Setup GPIOs for PCI INTA */
- GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI1_INTA);
- GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI1_INTA);
-
- /* Setup GPIOs for 33MHz clock output */
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK);
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK);
- writel(0x011001FF, IXP425_GPIO_GPCLKR);
-
- udelay(533);
- GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST);
-
- ACTUX1_LED1(2);
- ACTUX1_LED2(2);
- ACTUX1_LED3(0);
- ACTUX1_LED4(0);
- ACTUX1_LED5(0);
- ACTUX1_LED6(0);
- ACTUX1_LED7(0);
-
- ACTUX1_HS(ACTUX1_HS_DCD);
-
- return 0;
-}
-
-/*
- * Check Board Identity
- */
-int checkboard(void)
-{
- char buf[64];
- int i = getenv_f("serial#", buf, sizeof(buf));
-
- puts("Board: AcTux-1 rev.");
- putc(ACTUX1_BOARDREL + 'A' - 1);
-
- if (i > 0) {
- puts(", serial# ");
- puts(buf);
- }
- putc('\n');
-
- return 0;
-}
-
-/*************************************************************************
- * get_board_rev() - setup to pass kernel board revision information
- * 0 = reserved
- * 1 = Rev. A
- * 2 = Rev. B
- *************************************************************************/
-u32 get_board_rev(void)
-{
- return ACTUX1_BOARDREL;
-}
-
-int dram_init(void)
-{
- gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 128<<20);
- return 0;
-}
-
-
-#ifdef CONFIG_PCI
-struct pci_controller hose;
-
-void pci_init_board(void)
-{
- pci_ixp_init(&hose);
-}
-#endif
-
-void reset_phy(void)
-{
- u16 id1, id2;
-
- /* initialize the PHY */
- miiphy_reset("NPE0", CONFIG_PHY_ADDR);
-
- miiphy_read("NPE0", CONFIG_PHY_ADDR, MII_PHYSID1, &id1);
- miiphy_read("NPE0", CONFIG_PHY_ADDR, MII_PHYSID2, &id2);
-
- id2 &= 0xFFF0; /* mask out revision bits */
-
- if (id1 == 0x13 && id2 == 0x78e0) {
- /*
- * LXT971/LXT972 PHY: set LED outputs:
- * LED1(green) = Link/ACT,
- * LED2 (unused) = LINK,
- * LED3(red) = Coll
- */
- miiphy_write("NPE0", CONFIG_PHY_ADDR, 20, 0xD432);
- } else if (id1 == 0x143 && id2 == 0xbc30) {
- /* BCM5241: default values are OK */
- } else
- printf("unknown ethernet PHY ID: %x %x\n", id1, id2);
-}