1 files changed, 0 insertions, 85 deletions
diff --git a/board/Marvell/dkb/dkb.c b/board/Marvell/dkb/dkb.c
deleted file mode 100644
index c0c3125..0000000
--- a/board/Marvell/dkb/dkb.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * (C) Copyright 2011
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Lei Wen <leiwen@marvell.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mvmfp.h>
-#include <i2c.h>
-#include <asm/arch/mfp.h>
-#include <asm/arch/cpu.h>
-#ifdef CONFIG_GENERIC_MMC
-#include <sdhci.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
-	u32 mfp_cfg[] = {
-		/* Enable Console on UART2 */
-		MFP47_UART2_RXD,
-		MFP48_UART2_TXD,
-
-		/* I2C */
-		MFP53_CI2C_SCL,
-		MFP54_CI2C_SDA,
-
-		/* MMC1 */
-		MFP_MMC1_DAT7,
-		MFP_MMC1_DAT6,
-		MFP_MMC1_DAT5,
-		MFP_MMC1_DAT4,
-		MFP_MMC1_DAT3,
-		MFP_MMC1_DAT2,
-		MFP_MMC1_DAT1,
-		MFP_MMC1_DAT0,
-		MFP_MMC1_CMD,
-		MFP_MMC1_CLK,
-		MFP_MMC1_CD,
-		MFP_MMC1_WP,
-
-		MFP_EOC		/*End of configureation*/
-	};
-	/* configure MFP's */
-	mfp_config(mfp_cfg);
-
-	return 0;
-}
-
-int board_init(void)
-{
-	/* arch number of Board */
-	gd->bd->bi_arch_number = MACH_TYPE_TTC_DKB;
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = panth_sdram_base(0) + 0x100;
-	return 0;
-}
-
-#ifdef CONFIG_GENERIC_MMC
-#define I2C_SLAVE_ADDR	0x34
-#define LDO13_REG	0x28
-#define LDO_V30		0x6
-#define LDO_VOLTAGE(x)	((x & 0x7) << 1)
-#define LDO_EN		0x1
-int board_mmc_init(bd_t *bd)
-{
-	ulong mmc_base_address[CONFIG_SYS_MMC_NUM] = CONFIG_SYS_MMC_BASE;
-	u8 i, data;
-
-	/* set LDO 13 to 3.0v */
-	data = LDO_VOLTAGE(LDO_V30) | LDO_EN;
-	i2c_write(I2C_SLAVE_ADDR, LDO13_REG, 1, &data, 1);
-
-	for (i = 0; i < CONFIG_SYS_MMC_NUM; i++) {
-		if (mv_sdh_init(mmc_base_address[i], 0, 0,
-				SDHCI_QUIRK_32BIT_DMA_ADDR))
-			return 1;
-	}
-
-	return 0;
-}
-#endif