diff options
Diffstat (limited to 'board/Marvell/db64360/sdram_init.c')
| -rw-r--r-- | board/Marvell/db64360/sdram_init.c | 28 |
1 files changed, 14 insertions, 14 deletions
diff --git a/board/Marvell/db64360/sdram_init.c b/board/Marvell/db64360/sdram_init.c index ecadaf2..d0817d7 100644 --- a/board/Marvell/db64360/sdram_init.c +++ b/board/Marvell/db64360/sdram_init.c @@ -312,7 +312,7 @@ return 0; } else dimmInfo->slot = slot; /* start to fill up dimminfo for this "slot" */ -#ifdef CFG_DISPLAY_DIMM_SPD_CONTENT +#ifdef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT for (i = 0; i <= 127; i++) { printf ("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i], @@ -690,16 +690,16 @@ return 0; if ((dimmInfo-> minimumCycleTimeAtMaxCasLatancy_LoP < - CFG_DDR_SDRAM_CYCLE_COUNT_LOP) + CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP) || ((dimmInfo-> minimumCycleTimeAtMaxCasLatancy_LoP == - CFG_DDR_SDRAM_CYCLE_COUNT_LOP) + CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP) && (dimmInfo-> minimumCycleTimeAtMaxCasLatancy_RoP < - CFG_DDR_SDRAM_CYCLE_COUNT_ROP))) + CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP))) { dimmInfo-> maxClSupported_DDR @@ -714,16 +714,16 @@ return 0; if ((dimmInfo-> minimumCycleTimeAtMaxCasLatancy_LoP > - CFG_DDR_SDRAM_CYCLE_COUNT_LOP) + CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP) || ((dimmInfo-> minimumCycleTimeAtMaxCasLatancy_LoP == - CFG_DDR_SDRAM_CYCLE_COUNT_LOP) + CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP) && (dimmInfo-> minimumCycleTimeAtMaxCasLatancy_RoP > - CFG_DDR_SDRAM_CYCLE_COUNT_ROP))) + CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP))) { printf ("*********************************************************\n"); printf ("*** sysClock is higher than SDRAM's allowed frequency ***\n"); @@ -1290,37 +1290,37 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info) case 0x0: case 0x80: /* refresh period is 15.625 usec */ sdram_config_reg = - (unsigned int) (((float) 15.625 * (float) CFG_BUS_HZ) + (unsigned int) (((float) 15.625 * (float) CONFIG_SYS_BUS_HZ) / (float) 1000000.0); break; case 0x1: case 0x81: /* refresh period is 3.9 usec */ sdram_config_reg = - (unsigned int) (((float) 3.9 * (float) CFG_BUS_HZ) / + (unsigned int) (((float) 3.9 * (float) CONFIG_SYS_BUS_HZ) / (float) 1000000.0); break; case 0x2: case 0x82: /* refresh period is 7.8 usec */ sdram_config_reg = - (unsigned int) (((float) 7.8 * (float) CFG_BUS_HZ) / + (unsigned int) (((float) 7.8 * (float) CONFIG_SYS_BUS_HZ) / (float) 1000000.0); break; case 0x3: case 0x83: /* refresh period is 31.3 usec */ sdram_config_reg = - (unsigned int) (((float) 31.3 * (float) CFG_BUS_HZ) / + (unsigned int) (((float) 31.3 * (float) CONFIG_SYS_BUS_HZ) / (float) 1000000.0); break; case 0x4: case 0x84: /* refresh period is 62.5 usec */ sdram_config_reg = - (unsigned int) (((float) 62.5 * (float) CFG_BUS_HZ) / + (unsigned int) (((float) 62.5 * (float) CONFIG_SYS_BUS_HZ) / (float) 1000000.0); break; case 0x5: case 0x85: /* refresh period is 125 usec */ sdram_config_reg = - (unsigned int) (((float) 125 * (float) CFG_BUS_HZ) / + (unsigned int) (((float) 125 * (float) CONFIG_SYS_BUS_HZ) / (float) 1000000.0); break; default: /* refresh period undefined */ @@ -1807,7 +1807,7 @@ phys_size_t initdram (int board_type) printf ("-- DIMM2 has %d banks\n", dimmInfo2.numOfModuleBanks); - for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) { + for (bank_no = 0; bank_no < CONFIG_SYS_DRAM_BANKS; bank_no++) { /* skip over banks that are not populated */ if (!checkbank[bank_no]) continue; |