summaryrefslogtreecommitdiff
path: root/board/LaCie/edminiv2/edminiv2.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/LaCie/edminiv2/edminiv2.c')
-rw-r--r--board/LaCie/edminiv2/edminiv2.c70
1 files changed, 20 insertions, 50 deletions
diff --git a/board/LaCie/edminiv2/edminiv2.c b/board/LaCie/edminiv2/edminiv2.c
index 80ec7fa..edf6281 100644
--- a/board/LaCie/edminiv2/edminiv2.c
+++ b/board/LaCie/edminiv2/edminiv2.c
@@ -12,59 +12,11 @@
#include <miiphy.h>
#include <asm/arch/orion5x.h>
#include "../common/common.h"
+#include <spl.h>
+#include <ns16550.h>
DECLARE_GLOBAL_DATA_PTR;
-/*
- * The ED Mini V2 is equipped with a Macronix MXLV400CB FLASH
- * which CFI does not properly detect, hence the LEGACY config.
- */
-#if defined(CONFIG_FLASH_CFI_LEGACY)
-#include <flash.h>
-ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
-{
- int sectsz[] = CONFIG_SYS_FLASH_SECTSZ;
- int sect;
-
- if (base != CONFIG_SYS_FLASH_BASE)
- return 0;
-
- info->size = 0;
- info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- /* set each sector's start address and size based */
- for (sect = 0; sect < CONFIG_SYS_MAX_FLASH_SECT; sect++) {
- info->start[sect] = base+info->size;
- info->size += sectsz[sect];
- }
- /* This flash must be accessed in 8-bits mode, no buffer. */
- info->flash_id = 0x01000000;
- info->portwidth = FLASH_CFI_8BIT;
- info->chipwidth = FLASH_CFI_BY8;
- info->buffer_size = 0;
- /* timings are derived from the Macronix datasheet. */
- info->erase_blk_tout = 1000;
- info->write_tout = 10;
- info->buffer_write_tout = 300;
- /* Commands and addresses are for AMD mode 8-bit access. */
- info->vendor = CFI_CMDSET_AMD_LEGACY;
- info->cmd_reset = 0xF0;
- info->interface = FLASH_CFI_X8;
- info->legacy_unlock = 0;
- info->ext_addr = 0;
- info->addr_unlock1 = 0x00000aaa;
- info->addr_unlock2 = 0x00000555;
- /* Manufacturer Macronix, device MX29LV400CB, CFI 1.3. */
- info->manufacturer_id = 0x22;
- info->device_id = 0xBA;
- info->device_id2 = 0;
- info->cfi_version = 0x3133;
- info->cfi_offset = 0x0000;
- info->name = "MX29LV400CB";
-
- return 1;
-}
-#endif /* CONFIG_SYS_FLASH_CFI */
-
int board_init(void)
{
/* arch number of board */
@@ -83,3 +35,21 @@ void reset_phy(void)
mv_phy_88e1116_init("egiga0", 8);
}
#endif /* CONFIG_RESET_PHY_R */
+
+/*
+ * SPL serial setup and NOR boot device selection
+ */
+
+#ifdef CONFIG_SPL_BUILD
+
+void spl_board_init(void)
+{
+ preloader_console_init();
+}
+
+u32 spl_boot_device(void)
+{
+ return BOOT_DEVICE_NOR;
+}
+
+#endif /* CONFIG_SPL_BUILD */