diff options
Diffstat (limited to 'board/LEOX/elpt860')
-rw-r--r-- | board/LEOX/elpt860/README.LEOX | 2 | ||||
-rw-r--r-- | board/LEOX/elpt860/elpt860.c | 52 | ||||
-rw-r--r-- | board/LEOX/elpt860/flash.c | 38 | ||||
-rw-r--r-- | board/LEOX/elpt860/u-boot.lds | 3 | ||||
-rw-r--r-- | board/LEOX/elpt860/u-boot.lds.debug | 2 |
5 files changed, 49 insertions, 48 deletions
diff --git a/board/LEOX/elpt860/README.LEOX b/board/LEOX/elpt860/README.LEOX index 9052b09..25524af 100644 --- a/board/LEOX/elpt860/README.LEOX +++ b/board/LEOX/elpt860/README.LEOX @@ -106,7 +106,7 @@ version - print monitor version ? - alias for 'help' ################################################## -# Environment Variables (CFG_ENV_IS_IN_NVRAM) +# Environment Variables (CONFIG_ENV_IS_IN_NVRAM) ############################## LEOX_elpt860: printenv diff --git a/board/LEOX/elpt860/elpt860.c b/board/LEOX/elpt860/elpt860.c index 5f50631..905df92 100644 --- a/board/LEOX/elpt860/elpt860.c +++ b/board/LEOX/elpt860/elpt860.c @@ -138,23 +138,23 @@ const uint sdram_table[] = { /* ------------------------------------------------------------------------- */ -#define CFG_PC4 0x0800 +#define CONFIG_SYS_PC4 0x0800 -#define CFG_DS1 CFG_PC4 +#define CONFIG_SYS_DS1 CONFIG_SYS_PC4 /* * Very early board init code (fpga boot, etc.) */ int board_early_init_f (void) { - volatile immap_t *immr = (immap_t *) CFG_IMMR; + volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; /* * Light up the red led on ELPT860 pcb (DS1) (PCDAT) */ - immr->im_ioport.iop_pcdat &= ~CFG_DS1; /* PCDAT (DS1 = 0) */ - immr->im_ioport.iop_pcpar &= ~CFG_DS1; /* PCPAR (0=general purpose I/O) */ - immr->im_ioport.iop_pcdir |= CFG_DS1; /* PCDIR (I/O: 0=input, 1=output) */ + immr->im_ioport.iop_pcdat &= ~CONFIG_SYS_DS1; /* PCDAT (DS1 = 0) */ + immr->im_ioport.iop_pcpar &= ~CONFIG_SYS_DS1; /* PCPAR (0=general purpose I/O) */ + immr->im_ioport.iop_pcdir |= CONFIG_SYS_DS1; /* PCDIR (I/O: 0=input, 1=output) */ return (0); /* success */ } @@ -181,7 +181,7 @@ int checkboard (void) phys_size_t initdram (int board_type) { - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; long int size8, size9; long int size_b0 = 0; @@ -207,7 +207,7 @@ phys_size_t initdram (int board_type) * with two SDRAM banks or four cycles every 31.2 us with one * bank. It will be adjusted after memory sizing. */ - memctl->memc_mptpr = CFG_MPTPR_2BK_8K; + memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K; /* * The following value is used as an address (i.e. opcode) for @@ -229,10 +229,10 @@ phys_size_t initdram (int board_type) * preliminary addresses - these have to be modified after the * SDRAM size has been determined. */ - memctl->memc_or1 = CFG_OR1_PRELIM; - memctl->memc_br1 = CFG_BR1_PRELIM; + memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; + memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; - memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */ + memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */ udelay (200); @@ -252,7 +252,7 @@ phys_size_t initdram (int board_type) * * try 8 column mode */ - size8 = dram_size (CFG_MAMR_8COL, + size8 = dram_size (CONFIG_SYS_MAMR_8COL, SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE); udelay (1000); @@ -260,7 +260,7 @@ phys_size_t initdram (int board_type) /* * try 9 column mode */ - size9 = dram_size (CFG_MAMR_9COL, + size9 = dram_size (CONFIG_SYS_MAMR_9COL, SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE); if (size8 < size9) { /* leave configuration at 9 columns */ @@ -269,7 +269,7 @@ phys_size_t initdram (int board_type) } else { /* back to 8 columns */ size_b0 = size8; - memctl->memc_mamr = CFG_MAMR_8COL; + memctl->memc_mamr = CONFIG_SYS_MAMR_8COL; udelay (500); /* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */ } @@ -282,22 +282,22 @@ phys_size_t initdram (int board_type) */ if (size_b0 < 0x02000000) { /* reduce to 15.6 us (62.4 us / quad) */ - memctl->memc_mptpr = CFG_MPTPR_2BK_4K; + memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K; udelay (1000); } /* * Final mapping: map bigger bank first */ - memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; - memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; + memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; + memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; { unsigned long reg; /* adjust refresh rate depending on SDRAM type, one bank */ reg = memctl->memc_mptpr; - reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */ + reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */ memctl->memc_mptpr = reg; } @@ -319,7 +319,7 @@ phys_size_t initdram (int board_type) static long int dram_size (long int mamr_value, long int *base, long int maxsize) { - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; memctl->memc_mamr = mamr_value; @@ -329,20 +329,20 @@ dram_size (long int mamr_value, long int *base, long int maxsize) /* ------------------------------------------------------------------------- */ -#define CFG_PA1 0x4000 -#define CFG_PA2 0x2000 +#define CONFIG_SYS_PA1 0x4000 +#define CONFIG_SYS_PA2 0x2000 -#define CFG_LBKs (CFG_PA2 | CFG_PA1) +#define CONFIG_SYS_LBKs (CONFIG_SYS_PA2 | CONFIG_SYS_PA1) void reset_phy (void) { - volatile immap_t *immr = (immap_t *) CFG_IMMR; + volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; /* * Ensure LBK LXT901 ethernet 1 & 2 = 0 ... for normal loopback in effect * and no AUI loopback */ - immr->im_ioport.iop_padat &= ~CFG_LBKs; /* PADAT (LBK eth 1&2 = 0) */ - immr->im_ioport.iop_papar &= ~CFG_LBKs; /* PAPAR (0=general purpose I/O) */ - immr->im_ioport.iop_padir |= CFG_LBKs; /* PADIR (I/O: 0=input, 1=output) */ + immr->im_ioport.iop_padat &= ~CONFIG_SYS_LBKs; /* PADAT (LBK eth 1&2 = 0) */ + immr->im_ioport.iop_papar &= ~CONFIG_SYS_LBKs; /* PAPAR (0=general purpose I/O) */ + immr->im_ioport.iop_padir |= CONFIG_SYS_LBKs; /* PADIR (I/O: 0=input, 1=output) */ } diff --git a/board/LEOX/elpt860/flash.c b/board/LEOX/elpt860/flash.c index c1b3b85..9a75aad 100644 --- a/board/LEOX/elpt860/flash.c +++ b/board/LEOX/elpt860/flash.c @@ -33,7 +33,7 @@ /* ** Note 1: In this file, you have to provide the following variable: ** ------ -** flash_info_t flash_info[CFG_MAX_FLASH_BANKS] +** flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS] ** 'flash_info_t' structure is defined into 'include/flash.h' ** and defined as extern into 'common/cmd_flash.c' ** @@ -61,11 +61,11 @@ #include <mpc8xx.h> -#ifndef CFG_ENV_ADDR -# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET) +#ifndef CONFIG_ENV_ADDR +# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) #endif -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ /*----------------------------------------------------------------------- * Internal Functions @@ -82,13 +82,13 @@ static int write_byte (flash_info_t *info, ulong dest, uchar data); unsigned long flash_init (void) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; unsigned long size_b0; int i; /* Init: no FLASHes known */ - for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) + for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { flash_info[i].flash_id = FLASH_UNKNOWN; } @@ -105,28 +105,28 @@ flash_init (void) } /* Remap FLASH according to real size */ - memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK); - memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_PS_8 | BR_V; + memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK); + memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_PS_8 | BR_V; /* Re-do sizing to get full correct info */ - size_b0 = flash_get_size ((volatile unsigned char *)CFG_FLASH_BASE, + size_b0 = flash_get_size ((volatile unsigned char *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); - flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]); + flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); -#if CFG_MONITOR_BASE >= CFG_FLASH_BASE +#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE /* monitor protection ON by default */ flash_protect (FLAG_PROTECT_SET, - CFG_MONITOR_BASE, - CFG_MONITOR_BASE + monitor_flash_len-1, + CONFIG_SYS_MONITOR_BASE, + CONFIG_SYS_MONITOR_BASE + monitor_flash_len-1, &flash_info[0]); #endif -#ifdef CFG_ENV_IS_IN_FLASH +#ifdef CONFIG_ENV_IS_IN_FLASH /* ENV protection ON by default */ flash_protect(FLAG_PROTECT_SET, - CFG_ENV_ADDR, - CFG_ENV_ADDR + CFG_ENV_SIZE-1, + CONFIG_ENV_ADDR, + CONFIG_ENV_ADDR + CONFIG_ENV_SIZE-1, &flash_info[0]); #endif @@ -383,7 +383,7 @@ flash_erase (flash_info_t *info, addr = (volatile unsigned char *)(info->start[l_sect]); while ( (addr[0] & 0x80) != 0x80 ) { - if ( (now = get_timer(start)) > CFG_FLASH_ERASE_TOUT ) + if ( (now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT ) { printf ("Timeout\n"); return ( 1 ); @@ -556,7 +556,7 @@ write_word (flash_info_t *info, start = get_timer (0); while ( (*((vu_long *)dest) & 0x00800080) != (data & 0x00800080) ) { - if ( get_timer(start) > CFG_FLASH_WRITE_TOUT ) + if ( get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT ) { return (1); } @@ -602,7 +602,7 @@ write_byte (flash_info_t *info, start = get_timer (0); while ( (*((volatile unsigned char *)dest) & 0x80) != (data & 0x80) ) { - if ( get_timer(start) > CFG_FLASH_WRITE_TOUT ) + if ( get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT ) { return (1); } diff --git a/board/LEOX/elpt860/u-boot.lds b/board/LEOX/elpt860/u-boot.lds index 7b1440b..9b9b980 100644 --- a/board/LEOX/elpt860/u-boot.lds +++ b/board/LEOX/elpt860/u-boot.lds @@ -77,7 +77,7 @@ SECTIONS lib_ppc/ticks.o (.text) . = env_offset; - common/environment.o (.text) + common/env_embedded.o (.text) *(.text) *(.fixup) @@ -147,6 +147,7 @@ SECTIONS *(.dynbss) *(.bss) *(COMMON) + . = ALIGN(4); } _end = . ; PROVIDE (end = .); diff --git a/board/LEOX/elpt860/u-boot.lds.debug b/board/LEOX/elpt860/u-boot.lds.debug index 3578670..434c9b7 100644 --- a/board/LEOX/elpt860/u-boot.lds.debug +++ b/board/LEOX/elpt860/u-boot.lds.debug @@ -70,7 +70,7 @@ SECTIONS lib_generic/crc32.o (.text) . = env_offset; - common/environment.o (.text) + common/env_embedded.o (.text) *(.text) *(.fixup) |