diff options
Diffstat (limited to 'board/LEOX/elpt860/README.LEOX')
| -rw-r--r-- | board/LEOX/elpt860/README.LEOX | 423 |
1 files changed, 0 insertions, 423 deletions
diff --git a/board/LEOX/elpt860/README.LEOX b/board/LEOX/elpt860/README.LEOX deleted file mode 100644 index aa41ff8..0000000 --- a/board/LEOX/elpt860/README.LEOX +++ /dev/null @@ -1,423 +0,0 @@ -============================================================================= - - U-Boot port on the LEOX's ELPT860 CPU board - ------------------------------------------- - -LEOX.org is about the development of free hardware and software resources - for system on chip. - -For more information, contact The LEOX team <team@leox.org> - -References: -~~~~~~~~~~ - 1) Get the last stable release from denx.de: - o ftp://ftp.denx.de/pub/u-boot/u-boot-0.2.0.tar.bz2 - 2) Get the current CVS snapshot: - o cvs -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot login - o cvs -z6 -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot co -P u-boot - -============================================================================= - -The ELPT860 CPU board has the following features: - -Processor: - MPC860T @ 50MHz - - PowerPC Core - - 65 MIPS - - Caches: D->4KB, I->4KB - - CPM: 4 SCCs, 2 SMCs - - Ethernet 10/100 - - SPI, I2C, PCMCIA, Parallel - -CPU board: - DRAM: 16 MB - - FLASH: 512 KB + (2 * 4 MB) - - NVRAM: 128 KB - - 1 Serial link - - 2 Ethernet 10 BaseT Channels - -On power-up the processor jumps to the address of 0x02000100 - -Thus, U-Boot is configured to reside in flash starting at the address of -0x02001000. The environment space is located in NVRAM separately from -U-Boot, at the address of 0x03000000. - -============================================================================= - - U-Boot test results - -============================================================================= - -################################################## -# Operation on the serial console (SMC1) -############################## - -U-Boot 0.2.2 (Jan 19 2003 - 11:08:39) - -CPU: XPC860xxZPnnB at 50 MHz: 4 kB I-Cache 4 kB D-Cache FEC present - *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** -Board: ### No HW ID - assuming ELPT860 -DRAM: 16 MB -FLASH: 512 kB -In: serial -Out: serial -Err: serial -Net: SCC ETHERNET - -Type "run nfsboot" to mount root filesystem over NFS - -Hit any key to stop autoboot: 0 -LEOX_elpt860: help -askenv - get environment variables from stdin -base - print or set address offset -bdinfo - print Board Info structure -bootm - boot application image from memory -bootp - boot image via network using BootP/TFTP protocol -bootd - boot default, i.e., run 'bootcmd' -cmp - memory compare -coninfo - print console devices and informations -cp - memory copy -crc32 - checksum calculation -echo - echo args to console -erase - erase FLASH memory -flinfo - print FLASH memory information -go - start application at address 'addr' -help - print online help -iminfo - print header information for application image -loadb - load binary file over serial line (kermit mode) -loads - load S-Record file over serial line -loop - infinite loop on address range -md - memory display -mm - memory modify (auto-incrementing) -mtest - simple RAM test -mw - memory write (fill) -nm - memory modify (constant address) -printenv- print environment variables -protect - enable or disable FLASH write protection -rarpboot- boot image via network using RARP/TFTP protocol -reset - Perform RESET of the CPU -run - run commands in an environment variable -saveenv - save environment variables to persistent storage -setenv - set environment variables -sleep - delay execution for some time -source - run script from memory -tftpboot- boot image via network using TFTP protocol - and env variables ipaddr and serverip -version - print monitor version -? - alias for 'help' - -################################################## -# Environment Variables (CONFIG_ENV_IS_IN_NVRAM) -############################## - -LEOX_elpt860: printenv -bootdelay=5 -loads_echo=1 -baudrate=9600 -stdin=serial -stdout=serial -stderr=serial -ethaddr=00:03:ca:00:64:df -ipaddr=192.168.0.30 -netmask=255.255.255.0 -serverip=192.168.0.1 -nfsserverip=192.168.0.1 -preboot=echo;echo Type "run nfsboot" to mount root filesystem over NFS;echo -gatewayip=192.168.0.1 -ramargs=setenv bootargs root=/dev/ram rw -rootargs=setenv rootpath /tftp/${ipaddr} -nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${nfsserverip}:${rootpath} -addip=setenv bootargs ${bootargs} ip=${ipaddr}:${nfsserverip}:${gatewayip}:${netmask}:${hostname}:eth0: -ramboot=tftp 400000 /home/leox/pMulti;run ramargs;bootm -nfsboot=tftp 400000 /home/leox/uImage;run rootargs;run nfsargs;run addip;bootm -bootcmd=run ramboot -clocks_in_mhz=1 - -Environment size: 730/16380 bytes - -################################################## -# Flash Memory Information -############################## - -LEOX_elpt860: flinfo - -Bank # 1: AMD AM29F040 (4 Mbits) - Size: 512 KB in 8 Sectors - Sector Start Addresses: - 02000000 (RO) 02010000 (RO) 02020000 (RO) 02030000 (RO) 02040000 - 02050000 02060000 02070000 - -################################################## -# Board Information Structure -############################## - -LEOX_elpt860: bdinfo -memstart = 0x00000000 -memsize = 0x01000000 -flashstart = 0x02000000 -flashsize = 0x00080000 -flashoffset = 0x00030000 -sramstart = 0x00000000 -sramsize = 0x00000000 -immr_base = 0xFF000000 -bootflags = 0x00000001 -intfreq = 50 MHz -busfreq = 50 MHz -ethaddr = 00:03:ca:00:64:df -IP addr = 192.168.0.30 -baudrate = 9600 bps - -################################################## -# Image Download and run over serial port -# hello_world (S-Record image) -# ===> 1) Enter "loads" command into U-Boot monitor -# ===> 2) From TeraTerm's bar menu, Select 'File/Send file...' -# Then select 'hello_world.srec' with the file browser -############################## - -U-Boot 0.2.2 (Jan 19 2003 - 11:08:39) - -CPU: XPC860xxZPnnB at 50 MHz: 4 kB I-Cache 4 kB D-Cache FEC present - *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** -Board: ### No HW ID - assuming ELPT860 -DRAM: 16 MB -FLASH: 512 kB -In: serial -Out: serial -Err: serial -Net: SCC ETHERNET - -Type "run nfsboot" to mount root filesystem over NFS - -Hit any key to stop autoboot: 0 -LEOX_elpt860: loads -## Ready for S-Record download ... -S804040004F3050154000501709905014C000501388D -## First Load Addr = 0x00040000 -## Last Load Addr = 0x0005018B -## Total Size = 0x0001018C = 65932 Bytes -## Start Addr = 0x00040004 -LEOX_elpt860: go 40004 This is a test !!! -## Starting application at 0x00040004 ... -Hello World -argc = 6 -argv[0] = "40004" -argv[1] = "This" -argv[2] = "is" -argv[3] = "a" -argv[4] = "test" -argv[5] = "!!!" -argv[6] = "<NULL>" -Hit any key to exit ... - -## Application terminated, rc = 0x0 - -################################################## -# Image download and run over ethernet interface -# Linux-2.4.4 (uImage) + Root filesystem mounted over NFS -############################## - -U-Boot 0.2.2 (Jan 19 2003 - 11:08:39) - -CPU: XPC860xxZPnnB at 50 MHz: 4 kB I-Cache 4 kB D-Cache FEC present - *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** -Board: ### No HW ID - assuming ELPT860 -DRAM: 16 MB -FLASH: 512 kB -In: serial -Out: serial -Err: serial -Net: SCC ETHERNET - -Type "run nfsboot" to mount root filesystem over NFS - -Hit any key to stop autoboot: 0 -LEOX_elpt860: run nfsboot -ARP broadcast 1 -TFTP from server 192.168.0.1; our IP address is 192.168.0.30 -Filename '/home/leox/uImage'. -Load address: 0x400000 -Loading: ################################################################# - ############################# -done -Bytes transferred = 477294 (7486e hex) -## Booting image at 00400000 ... - Image Name: Linux-2.4.4 - Image Type: PowerPC Linux Kernel Image (gzip compressed) - Data Size: 477230 Bytes = 466 kB = 0 MB - Load Address: 00000000 - Entry Point: 00000000 - Verifying Checksum ... OK - Uncompressing Kernel Image ... OK -Linux version 2.4.4-rthal5 (leox@p5ak6650) (gcc version 2.95.3 20010315 (release/MontaVista)) #1 Wed Jul 3 10:23:53 CEST 2002 -On node 0 totalpages: 4096 -zone(0): 4096 pages. -zone(1): 0 pages. -zone(2): 0 pages. -Kernel command line: root=/dev/nfs rw nfsroot=192.168.0.1:/tftp/192.168.0.30 ip=192.168.0.30:192.168.0.1:192.168.0.1:255.255.255.0::eth0: -rtsched version <20010618.1050.24> -Decrementer Frequency: 3125000 -Warning: real time clock seems stuck! -Calibrating delay loop... 49.76 BogoMIPS -Memory: 14720k available (928k kernel code, 384k data, 44k init, 0k highmem) -Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes) -Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) -Page-cache hash table entries: 4096 (order: 2, 16384 bytes) -Inode-cache hash table entries: 1024 (order: 1, 8192 bytes) -POSIX conformance testing by UNIFIX -Linux NET4.0 for Linux 2.4 -Based upon Swansea University Computer Society NET3.039 -Starting kswapd v1.8 -CPM UART driver version 0.03 -ttyS0 on SMC1 at 0x0280, BRG1 -block: queued sectors max/low 9701kB/3233kB, 64 slots per queue -RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize -eth0: CPM ENET Version 0.2 on SCC1, 00:03:ca:00:64:df -NET4: Linux TCP/IP 1.0 for NET4.0 -IP Protocols: ICMP, UDP, TCP -IP: routing cache hash table of 512 buckets, 4Kbytes -TCP: Hash tables configured (established 1024 bind 1024) -NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -Looking up port of RPC 100003/2 on 192.168.0.1 -Looking up port of RPC 100005/2 on 192.168.0.1 -VFS: Mounted root (nfs filesystem). -Freeing unused kernel memory: 44k init -INIT: version 2.78 booting - Welcome to DENX Embedded Linux Environment - Press 'I' to enter interactive startup. -Mounting proc filesystem: [ OK ] -Configuring kernel parameters: [ OK ] -Cannot access the Hardware Clock via any known method. -Use the --debug option to see the details of our search for an access method. -Setting clock : Wed Dec 31 19:00:11 EST 1969 [ OK ] -Activating swap partitions: [ OK ] -Setting hostname 192.168.0.30: [ OK ] -Finding module dependencies: -[ OK ] -Checking filesystems -Checking all file systems. -[ OK ] -Mounting local filesystems: [ OK ] -Enabling swap space: [ OK ] -INIT: Entering runlevel: 3 -Entering non-interactive startup -Starting system logger: [ OK ] -Starting kernel logger: [ OK ] -Starting xinetd: [ OK ] - -192 login: root -Last login: Wed Dec 31 19:00:41 on ttyS0 -bash-2.04# - -################################################## -# Image download and run over ethernet interface -# Linux-2.4.4 + Root filesystem mounted from RAM (pMulti) -############################## - -U-Boot 0.2.2 (Jan 19 2003 - 11:08:39) - -CPU: XPC860xxZPnnB at 50 MHz: 4 kB I-Cache 4 kB D-Cache FEC present - *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** -Board: ### No HW ID - assuming ELPT860 -DRAM: 16 MB -FLASH: 512 kB -In: serial -Out: serial -Err: serial -Net: SCC ETHERNET - -Type "run nfsboot" to mount root filesystem over NFS - -Hit any key to stop autoboot: 0 -LEOX_elpt860: run ramboot -ARP broadcast 1 -TFTP from server 192.168.0.1; our IP address is 192.168.0.30 -Filename '/home/leox/pMulti'. -Load address: 0x400000 -Loading: ################################################################# - ################################################################# - ################################################################# - ################################################################# - ################################################################# - ######################################################## -done -Bytes transferred = 1947816 (1db8a8 hex) -## Booting image at 00400000 ... - Image Name: linux-2.4.4-2002-03-21 Multiboot - Image Type: PowerPC Linux Multi-File Image (gzip compressed) - Data Size: 1947752 Bytes = 1902 kB = 1 MB - Load Address: 00000000 - Entry Point: 00000000 - Contents: - Image 0: 477230 Bytes = 466 kB = 0 MB - Image 1: 1470508 Bytes = 1436 kB = 1 MB - Verifying Checksum ... OK - Uncompressing Multi-File Image ... OK - Loading Ramdisk to 00e44000, end 00fab02c ... OK -Linux version 2.4.4-rthal5 (leox@p5ak6650) (gcc version 2.95.3 20010315 (release/MontaVista)) #1 Wed Jul 3 10:23:53 CEST 2002 -On node 0 totalpages: 4096 -zone(0): 4096 pages. -zone(1): 0 pages. -zone(2): 0 pages. -Kernel command line: root=/dev/ram rw -rtsched version <20010618.1050.24> -Decrementer Frequency: 3125000 -Warning: real time clock seems stuck! -Calibrating delay loop... 49.76 BogoMIPS -Memory: 13280k available (928k kernel code, 384k data, 44k init, 0k highmem) -Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes) -Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) -Page-cache hash table entries: 4096 (order: 2, 16384 bytes) -Inode-cache hash table entries: 1024 (order: 1, 8192 bytes) -POSIX conformance testing by UNIFIX -Linux NET4.0 for Linux 2.4 -Based upon Swansea University Computer Society NET3.039 -Starting kswapd v1.8 -CPM UART driver version 0.03 -ttyS0 on SMC1 at 0x0280, BRG1 -block: queued sectors max/low 8741kB/2913kB, 64 slots per queue -RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize -eth0: CPM ENET Version 0.2 on SCC1, 00:03:ca:00:64:df -RAMDISK: Compressed image found at block 0 -Freeing initrd memory: 1436k freed -NET4: Linux TCP/IP 1.0 for NET4.0 -IP Protocols: ICMP, UDP, TCP -IP: routing cache hash table of 512 buckets, 4Kbytes -TCP: Hash tables configured (established 1024 bind 1024) -IP-Config: Incomplete network configuration information. -NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -VFS: Mounted root (ext2 filesystem). -Freeing unused kernel memory: 44k init -init started: BusyBox v0.60.2 (2002.07.01-12:06+0000) multi-call Configuring hostname -Configuring lo... -Configuring eth0... -Configuring Gateway... - -Please press Enter to activate this console. - -ELPT860 login: root -Password: -Welcome to Linux-2.4.4 for ELPT CPU board (MPC860T @ 50MHz) - - a8888b. - d888888b. - 8P"YP"Y88 - _ _ 8|o||o|88 - | | |_| 8' .88 - | | _ ____ _ _ _ _ 8`._.' Y8. - | | | | _ \| | | |\ \/ / d/ `8b. - | |___ | | | | | |_| |/ \ .dP . Y8b. - |_____||_|_| |_|\____|\_/\_/ d8:' " `::88b. - d8" `Y88b - :8P ' :888 - 8a. : _a88P - ._/"Yaa_ : .| 88P| - \ YP" `| 8P `. - / \._____.d| .' - `--..__)888888P`._.' -login[21]: root login on `ttyS0' - - - -BusyBox v0.60.3 (2002.07.20-10:39+0000) Built-in shell (ash) -Enter 'help' for a list of built-in commands. - -root@ELPT860:~ # |