diff options
Diffstat (limited to 'arch')
26 files changed, 237 insertions, 169 deletions
diff --git a/arch/arm/cpu/arm926ejs/mxs/mxs.c b/arch/arm/cpu/arm926ejs/mxs/mxs.c index a6af0fc..2298620 100644 --- a/arch/arm/cpu/arm926ejs/mxs/mxs.c +++ b/arch/arm/cpu/arm926ejs/mxs/mxs.c @@ -167,9 +167,9 @@ const char *get_imx_type(u32 imxtype) { switch (imxtype) { case MXC_CPU_MX23: - return "23"; /* Quad-Plus version of the mx6 */ + return "23"; case MXC_CPU_MX28: - return "28"; /* Dual-Plus version of the mx6 */ + return "28"; default: return "??"; } diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index e6f2275..ff932aa 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -97,7 +97,7 @@ void enable_enet_clk(unsigned char enable) { u32 mask, *addr; - if (is_cpu_type(MXC_CPU_MX6UL)) { + if (is_mx6ul()) { mask = MXC_CCM_CCGR3_ENET_MASK; addr = &imx_ccm->CCGR3; } else { @@ -117,7 +117,7 @@ void enable_uart_clk(unsigned char enable) { u32 mask; - if (is_cpu_type(MXC_CPU_MX6UL)) + if (is_mx6ul()) mask = MXC_CCM_CCGR5_UART_MASK; else mask = MXC_CCM_CCGR5_UART_MASK | MXC_CCM_CCGR5_UART_SERIAL_MASK; @@ -168,7 +168,7 @@ int enable_i2c_clk(unsigned char enable, unsigned i2c_num) reg &= ~mask; __raw_writel(reg, &imx_ccm->CCGR2); } else { - if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL)) { + if (is_mx6sx() || is_mx6ul()) { mask = MXC_CCM_CCGR6_I2C4_MASK; addr = &imx_ccm->CCGR6; } else { @@ -279,7 +279,7 @@ static u32 mxc_get_pll_pfd(enum pll_clocks pll, int pfd_num) switch (pll) { case PLL_BUS: - if (!is_cpu_type(MXC_CPU_MX6UL)) { + if (!is_mx6ul()) { if (pfd_num == 3) { /* No PFD3 on PPL2 */ return 0; @@ -379,8 +379,8 @@ static u32 get_ipg_per_clk(void) u32 reg, perclk_podf; reg = __raw_readl(&imx_ccm->cscmr1); - if (is_cpu_type(MXC_CPU_MX6SL) || is_cpu_type(MXC_CPU_MX6SX) || - is_mx6dqp() || is_cpu_type(MXC_CPU_MX6UL)) { + if (is_mx6sl() || is_mx6sx() || + is_mx6dqp() || is_mx6ul()) { if (reg & MXC_CCM_CSCMR1_PER_CLK_SEL_MASK) return MXC_HCLK; /* OSC 24Mhz */ } @@ -396,8 +396,7 @@ static u32 get_uart_clk(void) u32 freq = decode_pll(PLL_USBOTG, MXC_HCLK) / 6; /* static divider */ reg = __raw_readl(&imx_ccm->cscdr1); - if (is_cpu_type(MXC_CPU_MX6SL) || is_cpu_type(MXC_CPU_MX6SX) || - is_mx6dqp() || is_cpu_type(MXC_CPU_MX6UL)) { + if (is_mx6sl() || is_mx6sx() || is_mx6dqp() || is_mx6ul()) { if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL) freq = MXC_HCLK; } @@ -416,8 +415,7 @@ static u32 get_cspi_clk(void) cspi_podf = (reg & MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK) >> MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET; - if (is_mx6dqp() || is_cpu_type(MXC_CPU_MX6SL) || - is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL)) { + if (is_mx6dqp() || is_mx6sl() || is_mx6sx() || is_mx6ul()) { if (reg & MXC_CCM_CSCDR2_ECSPI_CLK_SEL_MASK) return MXC_HCLK / (cspi_podf + 1); } @@ -479,14 +477,13 @@ static u32 get_mmdc_ch0_clk(void) u32 freq, podf, per2_clk2_podf, pmu_misc2_audio_div; - if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL) || - is_cpu_type(MXC_CPU_MX6SL)) { + if (is_mx6sx() || is_mx6ul() || is_mx6sl()) { podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK) >> MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET; if (cbcdr & MXC_CCM_CBCDR_PERIPH2_CLK_SEL) { per2_clk2_podf = (cbcdr & MXC_CCM_CBCDR_PERIPH2_CLK2_PODF_MASK) >> MXC_CCM_CBCDR_PERIPH2_CLK2_PODF_OFFSET; - if (is_cpu_type(MXC_CPU_MX6SL)) { + if (is_mx6sl()) { if (cbcmr & MXC_CCM_CBCMR_PERIPH2_CLK2_SEL) freq = MXC_HCLK; else @@ -618,7 +615,7 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq) debug("mxs_set_lcdclk, freq = %dKHz\n", freq); - if ((!is_cpu_type(MXC_CPU_MX6SX)) && !is_cpu_type(MXC_CPU_MX6UL)) { + if (!is_mx6sx() && !is_mx6ul()) { debug("This chip not support lcd!\n"); return; } @@ -630,7 +627,7 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq) return; } - if (is_cpu_type(MXC_CPU_MX6SX)) { + if (is_mx6sx()) { reg = readl(&imx_ccm->cscdr2); /* Can't change clocks when clock not from pre-mux */ if ((reg & MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_MASK) != 0) @@ -711,7 +708,7 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq) MXC_CCM_CBCMR_LCDIF1_PODF_MASK, ((postd - 1) << MXC_CCM_CBCMR_LCDIF1_PODF_OFFSET)); - } else if (is_cpu_type(MXC_CPU_MX6SX)) { + } else if (is_mx6sx()) { /* Setting LCDIF2 for i.MX6SX */ if (enable_pll_video(pll_div, pll_num, pll_denom, post_div)) return; @@ -737,7 +734,7 @@ int enable_lcdif_clock(u32 base_addr) u32 reg = 0; u32 lcdif_clk_sel_mask, lcdif_ccgr3_mask; - if (is_cpu_type(MXC_CPU_MX6SX)) { + if (is_mx6sx()) { if ((base_addr != LCDIF1_BASE_ADDR) && (base_addr != LCDIF2_BASE_ADDR)) { puts("Wrong LCD interface!\n"); @@ -752,7 +749,7 @@ int enable_lcdif_clock(u32 base_addr) MXC_CCM_CCGR3_DISP_AXI_MASK) : (MXC_CCM_CCGR3_LCDIF1_PIX_MASK | MXC_CCM_CCGR3_DISP_AXI_MASK); - } else if (is_cpu_type(MXC_CPU_MX6UL)) { + } else if (is_mx6ul()) { if (base_addr != LCDIF1_BASE_ADDR) { puts("Wrong LCD interface!\n"); return -EINVAL; @@ -850,8 +847,7 @@ int enable_fec_anatop_clock(int fec_id, enum enet_freq freq) reg |= BF_ANADIG_PLL_ENET_DIV_SELECT(freq); } else if (fec_id == 1) { /* Only i.MX6SX/UL support ENET2 */ - if (!(is_cpu_type(MXC_CPU_MX6SX) || - is_cpu_type(MXC_CPU_MX6UL))) + if (!(is_mx6sx() || is_mx6ul())) return -EINVAL; reg &= ~BM_ANADIG_PLL_ENET2_DIV_SELECT; reg |= BF_ANADIG_PLL_ENET2_DIV_SELECT(freq); @@ -1044,7 +1040,7 @@ int enable_pcie_clock(void) #define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF 0xa #define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF 0xb - if (is_cpu_type(MXC_CPU_MX6SX)) + if (is_mx6sx()) lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF; else lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF; @@ -1228,7 +1224,7 @@ static void disable_ldb_di_clock_sources(void) /* Make sure PFDs are disabled at boot. */ reg = readl(&mxc_ccm->analog_pfd_528); /* Cannot disable pll2_pfd2_396M, as it is the MMDC clock in iMX6DL */ - if (is_cpu_type(MXC_CPU_MX6DL)) + if (is_mx6sdl()) reg |= 0x80008080; else reg |= 0x80808080; @@ -1251,7 +1247,7 @@ static void enable_ldb_di_clock_sources(void) int reg; reg = readl(&mxc_ccm->analog_pfd_528); - if (is_cpu_type(MXC_CPU_MX6DL)) + if (is_mx6sdl()) reg &= ~(0x80008080); else reg &= ~(0x80808080); diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c index 1e7ae28..f151eec 100644 --- a/arch/arm/cpu/armv7/mx6/ddr.c +++ b/arch/arm/cpu/armv7/mx6/ddr.c @@ -888,8 +888,7 @@ void mx6sdl_dram_iocfg(unsigned width, #define MR(val, ba, cmd, cs1) \ ((val << 16) | (1 << 15) | (cmd << 4) | (cs1 << 3) | ba) #define MMDC1(entry, value) do { \ - if (!is_cpu_type(MXC_CPU_MX6SX) && !is_cpu_type(MXC_CPU_MX6UL) && \ - !is_cpu_type(MXC_CPU_MX6SL)) \ + if (!is_mx6sx() && !is_mx6ul() && !is_mx6sl()) \ mmdc1->entry = value; \ } while (0) @@ -1197,12 +1196,11 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo, u16 mem_speed = ddr3_cfg->mem_speed; mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR; - if (!is_cpu_type(MXC_CPU_MX6SX) && !is_cpu_type(MXC_CPU_MX6UL) && - !is_cpu_type(MXC_CPU_MX6SL)) + if (!is_mx6sx() && !is_mx6ul() && !is_mx6sl()) mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR; /* Limit mem_speed for MX6D/MX6Q */ - if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) { + if (is_mx6dq() || is_mx6dqp()) { if (mem_speed > 1066) mem_speed = 1066; /* 1066 MT/s */ @@ -1221,7 +1219,7 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo, * Data rate of 1066 MT/s requires 533 MHz DDR3 clock, but MX6D/Q supports * up to 528 MHz, so reduce the clock to fit chip specs */ - if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) { + if (is_mx6dq() || is_mx6dqp()) { if (clock > 528) clock = 528; /* 528 MHz */ } diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index d4b22ad..88fcfdc 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -108,6 +108,12 @@ u32 get_cpu_rev(void) #define OCOTP_CFG3_SPEED_1GHZ 2 #define OCOTP_CFG3_SPEED_1P2GHZ 3 +/* + * For i.MX6UL + */ +#define OCOTP_CFG3_SPEED_528MHZ 1 +#define OCOTP_CFG3_SPEED_696MHZ 2 + u32 get_cpu_speed_grade_hz(void) { struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; @@ -120,17 +126,26 @@ u32 get_cpu_speed_grade_hz(void) val >>= OCOTP_CFG3_SPEED_SHIFT; val &= 0x3; + if (is_mx6ul()) { + if (val == OCOTP_CFG3_SPEED_528MHZ) + return 528000000; + else if (val == OCOTP_CFG3_SPEED_696MHZ) + return 69600000; + else + return 0; + } + switch (val) { /* Valid for IMX6DQ */ case OCOTP_CFG3_SPEED_1P2GHZ: - if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) + if (is_mx6dq() || is_mx6dqp()) return 1200000000; /* Valid for IMX6SX/IMX6SDL/IMX6DQ */ case OCOTP_CFG3_SPEED_1GHZ: return 996000000; /* Valid for IMX6DQ */ case OCOTP_CFG3_SPEED_850MHZ: - if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) + if (is_mx6dq() || is_mx6dqp()) return 852000000; /* Valid for IMX6SX/IMX6SDL/IMX6DQ */ case OCOTP_CFG3_SPEED_800MHZ: @@ -278,7 +293,7 @@ static void clear_mmdc_ch_mask(void) reg = readl(&mxc_ccm->ccdr); /* Clear MMDC channel mask */ - if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL) || is_cpu_type(MXC_CPU_MX6SL)) + if (is_mx6sx() || is_mx6ul() || is_mx6sl()) reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK); else reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK | MXC_CCM_CCDR_MMDC_CH0_HS_MASK); @@ -444,8 +459,7 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) struct fuse_bank4_regs *fuse = (struct fuse_bank4_regs *)bank->fuse_regs; - if ((is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL)) && - dev_id == 1) { + if ((is_mx6sx() || is_mx6ul()) && dev_id == 1) { u32 value = readl(&fuse->mac_addr2); mac[0] = value >> 24 ; mac[1] = value >> 16 ; @@ -509,7 +523,7 @@ void s_init(void) u32 mask528; u32 reg, periph1, periph2; - if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL)) + if (is_mx6sx() || is_mx6ul()) return; /* Due to hardware limitation, on MX6Q we need to gate/ungate all PFDs diff --git a/arch/arm/cpu/armv7/mx7/soc.c b/arch/arm/cpu/armv7/mx7/soc.c index 073bbc6..ef46c92 100644 --- a/arch/arm/cpu/armv7/mx7/soc.c +++ b/arch/arm/cpu/armv7/mx7/soc.c @@ -441,3 +441,11 @@ void s_init(void) return; } + +void reset_misc(void) +{ +#ifdef CONFIG_VIDEO_MXS + lcdif_power_down(); +#endif +} + diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c index 5b91446a..62dd275 100644 --- a/arch/arm/cpu/armv7/omap5/hw_data.c +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -364,82 +364,6 @@ struct vcores_data omap5430_volts_es2 = { .mm.abb_tx_done_mask = OMAP_ABB_MM_TXDONE_MASK, }; -struct vcores_data dra752_volts = { - .mpu.value = VDD_MPU_DRA7, - .mpu.efuse.reg = STD_FUSE_OPP_VMIN_MPU, - .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, - .mpu.addr = TPS659038_REG_ADDR_SMPS12, - .mpu.pmic = &tps659038, - .mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK, - - .eve.value = VDD_EVE_DRA7, - .eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE, - .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS, - .eve.addr = TPS659038_REG_ADDR_SMPS45, - .eve.pmic = &tps659038, - .eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK, - - .gpu.value = VDD_GPU_DRA7, - .gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU, - .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, - .gpu.addr = TPS659038_REG_ADDR_SMPS6, - .gpu.pmic = &tps659038, - .gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK, - - .core.value = VDD_CORE_DRA7, - .core.efuse.reg = STD_FUSE_OPP_VMIN_CORE, - .core.efuse.reg_bits = DRA752_EFUSE_REGBITS, - .core.addr = TPS659038_REG_ADDR_SMPS7, - .core.pmic = &tps659038, - - .iva.value = VDD_IVA_DRA7, - .iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA, - .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS, - .iva.addr = TPS659038_REG_ADDR_SMPS8, - .iva.pmic = &tps659038, - .iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK, -}; - -struct vcores_data dra722_volts = { - .mpu.value = VDD_MPU_DRA7, - .mpu.efuse.reg = STD_FUSE_OPP_VMIN_MPU, - .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, - .mpu.addr = TPS65917_REG_ADDR_SMPS1, - .mpu.pmic = &tps659038, - .mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK, - - .core.value = VDD_CORE_DRA7, - .core.efuse.reg = STD_FUSE_OPP_VMIN_CORE, - .core.efuse.reg_bits = DRA752_EFUSE_REGBITS, - .core.addr = TPS65917_REG_ADDR_SMPS2, - .core.pmic = &tps659038, - - /* - * The DSPEVE, GPU and IVA rails are usually grouped on DRA72x - * designs and powered by TPS65917 SMPS3, as on the J6Eco EVM. - */ - .gpu.value = VDD_GPU_DRA7, - .gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU, - .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, - .gpu.addr = TPS65917_REG_ADDR_SMPS3, - .gpu.pmic = &tps659038, - .gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK, - - .eve.value = VDD_EVE_DRA7, - .eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE, - .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS, - .eve.addr = TPS65917_REG_ADDR_SMPS3, - .eve.pmic = &tps659038, - .eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK, - - .iva.value = VDD_IVA_DRA7, - .iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA, - .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS, - .iva.addr = TPS65917_REG_ADDR_SMPS3, - .iva.pmic = &tps659038, - .iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK, -}; - /* * Enable essential clock domains, modules and * do some additional special settings needed @@ -802,7 +726,6 @@ void __weak hw_data_init(void) case DRA752_ES2_0: *prcm = &dra7xx_prcm; *dplls_data = &dra7xx_dplls; - *omap_vcores = &dra752_volts; *ctrl = &dra7xx_ctrl; break; @@ -810,7 +733,6 @@ void __weak hw_data_init(void) case DRA722_ES2_0: *prcm = &dra7xx_prcm; *dplls_data = &dra72x_dplls; - *omap_vcores = &dra722_volts; *ctrl = &dra7xx_ctrl; break; diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index 9a5a6b5..297687d 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -636,6 +636,9 @@ int timer_init(void) #ifdef CONFIG_FSL_LSCH3 u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR; #endif +#ifdef CONFIG_LS2080A + u32 __iomem *pctbenr = (u32 *)FSL_PMU_PCTBENR_OFFSET; +#endif #ifdef COUNTER_FREQUENCY_REAL unsigned long cntfrq = COUNTER_FREQUENCY_REAL; @@ -650,6 +653,15 @@ int timer_init(void) out_le32(cltbenr, 0xf); #endif +#ifdef CONFIG_LS2080A + /* + * In certain Layerscape SoCs, the clock for each core's + * has an enable bit in the PMU Physical Core Time Base Enable + * Register (PCTBENR), which allows the watchdog to operate. + */ + setbits_le32(pctbenr, 0xff); +#endif + /* Enable clock for timer * This is a global setting. */ diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 index f9323c1..da5e052 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 @@ -121,6 +121,35 @@ mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined mcmemsize: MC DRAM block size. If this variable is not defined, the value CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed. +mcinitcmd: This environment variable is defined to initiate MC and DPL deployment + from the location where it is stored(NOR, NAND, SD, SATA, USB)during + u-boot booting.If this variable is not defined then MC_BOOT_ENV_VAR + will be null and MC will not be booted and DPL will not be applied + during U-boot booting.However the MC, DPC and DPL can be applied from + console independently. + The variable needs to be set from the console once and then on + rebooting the parameters set in the varible will automatically be + executed. The commmand is demostrated taking an example of mc boot + using NOR Flash i.e. MC, DPL, and DPC is stored in the NOR flash: + + cp.b 0xa0000000 0x580300000 $filesize + cp.b 0x80000000 0x580800000 $filesize + cp.b 0x90000000 0x580700000 $filesize + + setenv mcinitcmd 'fsl_mc start mc 0x580300000 0x580800000' + + If only linux is to be booted then the mcinitcmd environment should be set as + + setenv mcinitcmd 'fsl_mc start mc 0x580300000 0x580800000;fsl_mc apply DPL 0x580700000' + + Here the addresses 0xa0000000, 0x80000000, 0x80000000 are of DDR to where + MC binary, DPC binary and DPL binary are stored and 0x580300000, 0x580800000 + and 0x580700000 are addresses in NOR where these are copied. It is to be + noted that these addresses in 'fsl_mc start mc 0x580300000 0x580800000;fsl_mc apply DPL 0x580700000' + can be replaced with the addresses of DDR to + which these will be copied in case of these binaries being stored in other + devices like SATA, USB, NAND, SD etc. + Booting from NAND ------------------- Booting from NAND requires two images, RCW and u-boot-with-spl.bin. diff --git a/arch/arm/dts/fsl-ls2080a-qds.dts b/arch/arm/dts/fsl-ls2080a-qds.dts index 547ec27..0a7f1ff 100644 --- a/arch/arm/dts/fsl-ls2080a-qds.dts +++ b/arch/arm/dts/fsl-ls2080a-qds.dts @@ -15,6 +15,7 @@ compatible = "fsl,ls2080a-qds", "fsl,ls2080a"; aliases { + spi0 = &qspi; spi1 = &dspi; }; }; @@ -51,3 +52,16 @@ reg = <2>; }; }; + +&qspi { + bus-num = <0>; + status = "okay"; + + qflash0: s25fs256s@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; diff --git a/arch/arm/dts/fsl-ls2080a.dtsi b/arch/arm/dts/fsl-ls2080a.dtsi index a5c579c..68ed133 100644 --- a/arch/arm/dts/fsl-ls2080a.dtsi +++ b/arch/arm/dts/fsl-ls2080a.dtsi @@ -126,4 +126,14 @@ interrupts = <0 26 0x4>; /* Level high type */ num-cs = <6>; }; + + qspi: quadspi@1550000 { + compatible = "fsl,vf610-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20c0000 0x0 0x10000>, + <0x0 0x20000000 0x0 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + num-cs = <4>; + }; }; diff --git a/arch/arm/imx-common/hab.c b/arch/arm/imx-common/hab.c index 8bbcc22..6731825 100644 --- a/arch/arm/imx-common/hab.c +++ b/arch/arm/imx-common/hab.c @@ -17,60 +17,55 @@ #define hab_rvt_report_event_p \ ( \ - ((is_cpu_type(MXC_CPU_MX6Q) || \ - is_cpu_type(MXC_CPU_MX6D)) && \ - (soc_rev() >= CHIP_REV_1_5)) ? \ + (is_mx6dqp()) ? \ ((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT_NEW) : \ - (is_cpu_type(MXC_CPU_MX6DL) && \ - (soc_rev() >= CHIP_REV_1_2)) ? \ + (is_mx6dq() && (soc_rev() >= CHIP_REV_1_5)) ? \ + ((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT_NEW) : \ + (is_mx6sdl() && (soc_rev() >= CHIP_REV_1_2)) ? \ ((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT_NEW) : \ ((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT) \ ) #define hab_rvt_report_status_p \ ( \ - ((is_cpu_type(MXC_CPU_MX6Q) || \ - is_cpu_type(MXC_CPU_MX6D)) && \ - (soc_rev() >= CHIP_REV_1_5)) ? \ + (is_mx6dqp()) ? \ + ((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS_NEW) :\ + (is_mx6dq() && (soc_rev() >= CHIP_REV_1_5)) ? \ ((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS_NEW) :\ - (is_cpu_type(MXC_CPU_MX6DL) && \ - (soc_rev() >= CHIP_REV_1_2)) ? \ + (is_mx6sdl() && (soc_rev() >= CHIP_REV_1_2)) ? \ ((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS_NEW) :\ ((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS) \ ) #define hab_rvt_authenticate_image_p \ ( \ - ((is_cpu_type(MXC_CPU_MX6Q) || \ - is_cpu_type(MXC_CPU_MX6D)) && \ - (soc_rev() >= CHIP_REV_1_5)) ? \ + (is_mx6dqp()) ? \ + ((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE_NEW) : \ + (is_mx6dq() && (soc_rev() >= CHIP_REV_1_5)) ? \ ((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE_NEW) : \ - (is_cpu_type(MXC_CPU_MX6DL) && \ - (soc_rev() >= CHIP_REV_1_2)) ? \ + (is_mx6sdl() && (soc_rev() >= CHIP_REV_1_2)) ? \ ((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE_NEW) : \ ((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE) \ ) #define hab_rvt_entry_p \ ( \ - ((is_cpu_type(MXC_CPU_MX6Q) || \ - is_cpu_type(MXC_CPU_MX6D)) && \ - (soc_rev() >= CHIP_REV_1_5)) ? \ + (is_mx6dqp()) ? \ ((hab_rvt_entry_t *)HAB_RVT_ENTRY_NEW) : \ - (is_cpu_type(MXC_CPU_MX6DL) && \ - (soc_rev() >= CHIP_REV_1_2)) ? \ + (is_mx6dq() && (soc_rev() >= CHIP_REV_1_5)) ? \ + ((hab_rvt_entry_t *)HAB_RVT_ENTRY_NEW) : \ + (is_mx6sdl() && (soc_rev() >= CHIP_REV_1_2)) ? \ ((hab_rvt_entry_t *)HAB_RVT_ENTRY_NEW) : \ ((hab_rvt_entry_t *)HAB_RVT_ENTRY) \ ) #define hab_rvt_exit_p \ ( \ - ((is_cpu_type(MXC_CPU_MX6Q) || \ - is_cpu_type(MXC_CPU_MX6D)) && \ - (soc_rev() >= CHIP_REV_1_5)) ? \ + (is_mx6dqp()) ? \ + ((hab_rvt_exit_t *)HAB_RVT_EXIT_NEW) : \ + (is_mx6dq() && (soc_rev() >= CHIP_REV_1_5)) ? \ ((hab_rvt_exit_t *)HAB_RVT_EXIT_NEW) : \ - (is_cpu_type(MXC_CPU_MX6DL) && \ - (soc_rev() >= CHIP_REV_1_2)) ? \ + (is_mx6sdl() && (soc_rev() >= CHIP_REV_1_2)) ? \ ((hab_rvt_exit_t *)HAB_RVT_EXIT_NEW) : \ ((hab_rvt_exit_t *)HAB_RVT_EXIT) \ ) @@ -424,8 +419,7 @@ uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size) */ /* Check MMU enabled */ if (is_soc_type(MXC_SOC_MX6) && get_cr() & CR_M) { - if (is_cpu_type(MXC_CPU_MX6Q) || - is_cpu_type(MXC_CPU_MX6D)) { + if (is_mx6dq()) { /* * This won't work on Rev 1.0.0 of * i.MX6Q/D, since their ROM doesn't @@ -434,10 +428,9 @@ uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size) */ if (!is_mx6dqp()) writel(1, MX6DQ_PU_IROM_MMU_EN_VAR); - } else if (is_cpu_type(MXC_CPU_MX6DL) || - is_cpu_type(MXC_CPU_MX6SOLO)) { + } else if (is_mx6sdl()) { writel(1, MX6DLS_PU_IROM_MMU_EN_VAR); - } else if (is_cpu_type(MXC_CPU_MX6SL)) { + } else if (is_mx6sl()) { writel(1, MX6SL_PU_IROM_MMU_EN_VAR); } } diff --git a/arch/arm/imx-common/init.c b/arch/arm/imx-common/init.c index 15dab1d..3d2ce3a 100644 --- a/arch/arm/imx-common/init.c +++ b/arch/arm/imx-common/init.c @@ -44,7 +44,7 @@ void init_aips(void) writel(0x00000000, &aips2->opacr3); writel(0x00000000, &aips2->opacr4); - if (is_cpu_type(MXC_CPU_MX6SX) || is_soc_type(MXC_SOC_MX7)) { + if (is_mx6sx() || is_mx7()) { /* * Set all MPROTx to be non-bufferable, trusted for R/W, * not forced to user-mode. @@ -78,8 +78,7 @@ void imx_set_wdog_powerdown(bool enable) writew(enable, &wdog1->wmcr); writew(enable, &wdog2->wmcr); - if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL) || - is_soc_type(MXC_SOC_MX7)) + if (is_mx6sx() || is_mx6ul() || is_mx7()) writew(enable, &wdog3->wmcr); #ifdef CONFIG_MX7D writew(enable, &wdog4->wmcr); diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c index 228d5f8..66137d1 100644 --- a/arch/arm/imx-common/iomux-v3.c +++ b/arch/arm/imx-common/iomux-v3.c @@ -83,7 +83,7 @@ void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list, #if defined(CONFIG_MX6QDL) stride = 2; - if (!is_cpu_type(MXC_CPU_MX6Q) && !is_cpu_type(MXC_CPU_MX6D)) + if (!is_mx6dq()) p += 1; #else stride = 1; diff --git a/arch/arm/imx-common/sata.c b/arch/arm/imx-common/sata.c index d174a46..acf9831 100644 --- a/arch/arm/imx-common/sata.c +++ b/arch/arm/imx-common/sata.c @@ -15,7 +15,7 @@ int setup_sata(void) struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; int ret; - if (!is_cpu_type(MXC_CPU_MX6Q) && !is_cpu_type(MXC_CPU_MX6D)) + if (!is_mx6dq() && !is_mx6dqp()) return 1; ret = enable_sata_clock(); diff --git a/arch/arm/imx-common/timer.c b/arch/arm/imx-common/timer.c index 92c7218..a01590c 100644 --- a/arch/arm/imx-common/timer.c +++ b/arch/arm/imx-common/timer.c @@ -43,10 +43,8 @@ DECLARE_GLOBAL_DATA_PTR; static inline int gpt_has_clk_source_osc(void) { #if defined(CONFIG_MX6) - if (((is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) && - (soc_rev() > CHIP_REV_1_0)) || is_cpu_type(MXC_CPU_MX6DL) || - is_cpu_type(MXC_CPU_MX6SOLO) || is_cpu_type(MXC_CPU_MX6SX) || - is_cpu_type(MXC_CPU_MX6UL)) + if (((is_mx6dq()) && (soc_rev() > CHIP_REV_1_0)) || + is_mx6dqp() || is_mx6sdl() || is_mx6sx() || is_mx6ul()) return 1; return 0; @@ -86,10 +84,7 @@ int timer_init(void) i |= GPTCR_CLKSOURCE_OSC | GPTCR_TEN; /* For DL/S, SX, UL, set 24Mhz OSC Enable bit and prescaler */ - if (is_cpu_type(MXC_CPU_MX6DL) || - is_cpu_type(MXC_CPU_MX6SOLO) || - is_cpu_type(MXC_CPU_MX6SX) || - is_cpu_type(MXC_CPU_MX6UL)) { + if (is_mx6sdl() || is_mx6sx() || is_mx6ul()) { i |= GPTCR_24MEN; /* Produce 3Mhz clock */ diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h index 1cebe2f..df877dd 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h @@ -122,6 +122,8 @@ static const struct sys_mmu_table early_mmu_table[] = { PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN }, { CONFIG_SYS_FSL_OCRAM_BASE, CONFIG_SYS_FSL_OCRAM_BASE, CONFIG_SYS_FSL_OCRAM_SIZE, MT_NORMAL, PTE_BLOCK_NON_SHARE }, + { CONFIG_SYS_FSL_QSPI_BASE1, CONFIG_SYS_FSL_QSPI_BASE1, + CONFIG_SYS_FSL_QSPI_SIZE1, MT_NORMAL, PTE_BLOCK_NON_SHARE}, /* For IFC Region #1, only the first 4MB is cache-enabled */ { CONFIG_SYS_FSL_IFC_BASE1, CONFIG_SYS_FSL_IFC_BASE1, CONFIG_SYS_FSL_IFC_SIZE1_1, MT_NORMAL, PTE_BLOCK_NON_SHARE }, @@ -176,6 +178,8 @@ static const struct sys_mmu_table final_mmu_table[] = { { CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_SIZE1, MT_NORMAL, PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS }, + { CONFIG_SYS_FSL_QSPI_BASE1, CONFIG_SYS_FSL_QSPI_BASE1, + CONFIG_SYS_FSL_QSPI_SIZE1, MT_NORMAL, PTE_BLOCK_NON_SHARE}, { CONFIG_SYS_FSL_QSPI_BASE2, CONFIG_SYS_FSL_QSPI_BASE2, CONFIG_SYS_FSL_QSPI_SIZE2, MT_DEVICE_NGNRNE, PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN }, diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index 65b3357..8d12d6c 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -26,6 +26,7 @@ #define CONFIG_SYS_FSL_TIMER_ADDR 0x023d0000 #define CONFIG_SYS_FSL_PMU_CLTBENR (CONFIG_SYS_FSL_PMU_ADDR + \ 0x18A0) +#define FSL_PMU_PCTBENR_OFFSET (CONFIG_SYS_FSL_PMU_ADDR + 0x8A0) #define CONFIG_SYS_FSL_WRIOP1_ADDR (CONFIG_SYS_IMMR + 0x7B80000) #define CONFIG_SYS_FSL_WRIOP1_MDIO1 (CONFIG_SYS_FSL_WRIOP1_ADDR + 0x16000) @@ -128,6 +129,8 @@ #define DCFG_PORSR1_RCW_SRC_NOR 0x12f00000 #define DCFG_RCWSR13 0x130 #define DCFG_RCWSR13_DSPI (0 << 8) +#define DCFG_RCWSR15 0x138 +#define DCFG_RCWSR15_IFCGRPABASE_QSPI 0x3 #define DCFG_DCSR_BASE 0X700100000ULL #define DCFG_DCSR_PORCR1 0x000 @@ -139,6 +142,7 @@ /* Supplemental Configuration */ #define SCFG_BASE 0x01fc0000 #define SCFG_USB3PRM1CR 0x000 +#define SCFG_QSPICLKCTLR 0x10 #define TP_ITYP_AV 0x00000001 /* Initiator available */ #define TP_ITYP_TYPE(x) (((x) & 0x6) >> 1) /* Initiator Type */ diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h index f2990db..c2e72f5 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h @@ -222,7 +222,12 @@ struct sunxi_ccm_reg { #define CCM_PLL11_CTRL_UPD (0x1 << 30) #define CCM_PLL11_CTRL_EN (0x1 << 31) +#if defined(CONFIG_MACH_SUN50I) +/* AHB1=100MHz failsafe setup from the FEL mode, usable with PMIC defaults */ +#define AHB1_ABP1_DIV_DEFAULT 0x00003190 /* AHB1=PLL6/6,APB1=AHB1/2 */ +#else #define AHB1_ABP1_DIV_DEFAULT 0x00003180 /* AHB1=PLL6/3,APB1=AHB1/2 */ +#endif #define AXI_GATE_OFFSET_DRAM 0 diff --git a/arch/arm/include/asm/imx-common/sys_proto.h b/arch/arm/include/asm/imx-common/sys_proto.h index 386c2dc..32f95b3 100644 --- a/arch/arm/include/asm/imx-common/sys_proto.h +++ b/arch/arm/include/asm/imx-common/sys_proto.h @@ -24,7 +24,15 @@ #define is_cpu_type(cpu) (get_cpu_type() == cpu) #define is_soc_type(soc) (get_soc_type() == soc) +#define is_mx6() (is_soc_type(MXC_SOC_MX6)) +#define is_mx7() (is_soc_type(MXC_SOC_MX7)) + #define is_mx6dqp() (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP)) +#define is_mx6dq() (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) +#define is_mx6sdl() (is_cpu_type(MXC_CPU_MX6SOLO) || is_cpu_type(MXC_CPU_MX6DL)) +#define is_mx6sx() (is_cpu_type(MXC_CPU_MX6SX)) +#define is_mx6sl() (is_cpu_type(MXC_CPU_MX6SL)) +#define is_mx6ul() (is_cpu_type(MXC_CPU_MX6UL)) u32 get_nr_cpus(void); u32 get_cpu_rev(void); diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 5c30ae9..21066f0 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -253,7 +253,7 @@ config SYS_DCACHE_SIZE The total size of the L1 Dcache, if known at compile time. config SYS_DCACHE_LINE_SIZE - hex + int default 0 help The size of L1 Dcache lines, if known at compile time. diff --git a/arch/mips/lib/cache.c b/arch/mips/lib/cache.c index 5f520c0..db81953 100644 --- a/arch/mips/lib/cache.c +++ b/arch/mips/lib/cache.c @@ -91,5 +91,5 @@ void invalidate_dcache_range(ulong start_addr, ulong stop) if (start_addr == stop) return; - cache_loop(start_addr, stop, lsize, HIT_INVALIDATE_I); + cache_loop(start_addr, stop, lsize, HIT_INVALIDATE_D); } diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c index e522ff3..269043d 100644 --- a/arch/x86/cpu/cpu.c +++ b/arch/x86/cpu/cpu.c @@ -24,6 +24,7 @@ #include <dm.h> #include <errno.h> #include <malloc.h> +#include <syscon.h> #include <asm/control_regs.h> #include <asm/coreboot_tables.h> #include <asm/cpu.h> @@ -751,6 +752,10 @@ int cpu_init_r(void) uclass_first_device(UCLASS_PCH, &dev); uclass_first_device(UCLASS_LPC, &dev); + /* Set up pin control if available */ + ret = syscon_get_by_driver_data(X86_SYSCON_PINCONF, &dev); + debug("%s, pinctrl=%p, ret=%d\n", __func__, dev, ret); + return 0; } diff --git a/arch/x86/dts/bayleybay.dts b/arch/x86/dts/bayleybay.dts index 4a50d86..c8907ce 100644 --- a/arch/x86/dts/bayleybay.dts +++ b/arch/x86/dts/bayleybay.dts @@ -65,6 +65,26 @@ }; }; + pch_pinctrl { + compatible = "intel,x86-pinctrl"; + reg = <0 0>; + + /* + * As of today, the latest version FSP (gold4) for BayTrail + * misses the PAD configuration of the SD controller's Card + * Detect signal. The default PAD value for the CD pin sets + * the pin to work in GPIO mode, which causes card detect + * status cannot be reflected by the Present State register + * in the SD controller (bit 16 & bit 18 are always zero). + * + * Configure this pin to function 1 (SD controller). + */ + sdmmc3_cd@0 { + pad-offset = <0x3a0>; + mode-func = <1>; + }; + }; + pci { compatible = "pci-x86"; #address-cells = <3>; @@ -213,7 +233,7 @@ fsp,mrc-init-mmio-size = <0x800>; fsp,mrc-init-spd-addr1 = <0xa0>; fsp,mrc-init-spd-addr2 = <0xa2>; - fsp,emmc-boot-mode = <2>; + fsp,emmc-boot-mode = <1>; fsp,enable-sdio; fsp,enable-sdcard; fsp,enable-hsuart1; diff --git a/arch/x86/dts/conga-qeval20-qa3-e3845.dts b/arch/x86/dts/conga-qeval20-qa3-e3845.dts index 1a4ecaa..fba089d 100644 --- a/arch/x86/dts/conga-qeval20-qa3-e3845.dts +++ b/arch/x86/dts/conga-qeval20-qa3-e3845.dts @@ -30,6 +30,22 @@ pch_pinctrl { compatible = "intel,x86-pinctrl"; + reg = <0 0>; + + /* + * As of today, the latest version FSP (gold4) for BayTrail + * misses the PAD configuration of the SD controller's Card + * Detect signal. The default PAD value for the CD pin sets + * the pin to work in GPIO mode, which causes card detect + * status cannot be reflected by the Present State register + * in the SD controller (bit 16 & bit 18 are always zero). + * + * Configure this pin to function 1 (SD controller). + */ + sdmmc3_cd@0 { + pad-offset = <0x3a0>; + mode-func = <1>; + }; }; chosen { @@ -217,7 +233,7 @@ fsp,mrc-init-mmio-size = <0x800>; fsp,mrc-init-spd-addr1 = <0xa0>; fsp,mrc-init-spd-addr2 = <0xa2>; - fsp,emmc-boot-mode = <2>; + fsp,emmc-boot-mode = <1>; fsp,enable-sdio; fsp,enable-sdcard; fsp,enable-hsuart1; diff --git a/arch/x86/dts/minnowmax.dts b/arch/x86/dts/minnowmax.dts index 936455b..1a8a8cc 100644 --- a/arch/x86/dts/minnowmax.dts +++ b/arch/x86/dts/minnowmax.dts @@ -29,6 +29,7 @@ pch_pinctrl { compatible = "intel,x86-pinctrl"; + reg = <0 0>; /* GPIO E0 */ soc_gpio_s5_0@0 { @@ -72,6 +73,21 @@ output-value = <1>; direction = <PIN_OUTPUT>; }; + + /* + * As of today, the latest version FSP (gold4) for BayTrail + * misses the PAD configuration of the SD controller's Card + * Detect signal. The default PAD value for the CD pin sets + * the pin to work in GPIO mode, which causes card detect + * status cannot be reflected by the Present State register + * in the SD controller (bit 16 & bit 18 are always zero). + * + * Configure this pin to function 1 (SD controller). + */ + sdmmc3_cd@0 { + pad-offset = <0x3a0>; + mode-func = <1>; + }; }; chosen { @@ -246,7 +262,7 @@ fsp,mrc-init-mmio-size = <0x800>; fsp,mrc-init-spd-addr1 = <0xa0>; fsp,mrc-init-spd-addr2 = <0xa2>; - fsp,emmc-boot-mode = <2>; + fsp,emmc-boot-mode = <1>; fsp,enable-sdio; fsp,enable-sdcard; fsp,enable-hsuart1; diff --git a/arch/x86/lib/acpi_table.c b/arch/x86/lib/acpi_table.c index ffb4678..bb71286 100644 --- a/arch/x86/lib/acpi_table.c +++ b/arch/x86/lib/acpi_table.c @@ -183,20 +183,20 @@ static int acpi_create_madt_lapic(struct acpi_madt_lapic *lapic, int acpi_create_madt_lapics(u32 current) { struct udevice *dev; - int length = 0; + int total_length = 0; for (uclass_find_first_device(UCLASS_CPU, &dev); dev; uclass_find_next_device(&dev)) { struct cpu_platdata *plat = dev_get_parent_platdata(dev); - - length += acpi_create_madt_lapic( - (struct acpi_madt_lapic *)current, - plat->cpu_id, plat->cpu_id); + int length = acpi_create_madt_lapic( + (struct acpi_madt_lapic *)current, + plat->cpu_id, plat->cpu_id); current += length; + total_length += length; } - return length; + return total_length; } int acpi_create_madt_ioapic(struct acpi_madt_ioapic *ioapic, u8 id, |