diff options
Diffstat (limited to 'arch')
201 files changed, 8957 insertions, 2435 deletions
diff --git a/arch/arc/include/asm/arch-arc700/hardware.h b/arch/arc/include/asm/arch-arc700/hardware.h deleted file mode 100644 index 8ec13a8..0000000 --- a/arch/arc/include/asm/arch-arc700/hardware.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * Copyright (C) 2014 Synopsys, Inc. All rights reserved. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * This file is only required to allow compilation of "designware_i2c" driver. - * Which explicitly includes <asm/arch/hardware.h>. - */ diff --git a/arch/arc/lib/relocate.c b/arch/arc/lib/relocate.c index 956aa14..2482bcd 100644 --- a/arch/arc/lib/relocate.c +++ b/arch/arc/lib/relocate.c @@ -41,19 +41,23 @@ int do_elf_reloc_fixups(void) */ memcpy(&val, offset_ptr_ram, sizeof(int)); +#ifdef __LITTLE_ENDIAN__ /* If location in ".text" section swap value */ if ((unsigned int)offset_ptr_rom < (unsigned int)&__text_end) val = (val << 16) | (val >> 16); +#endif /* Check that the target points into .text */ if (val >= CONFIG_SYS_TEXT_BASE && val <= (unsigned int)&__bss_end) { val += gd->reloc_off; +#ifdef __LITTLE_ENDIAN__ /* If location in ".text" section swap value */ if ((unsigned int)offset_ptr_rom < (unsigned int)&__text_end) val = (val << 16) | (val >> 16); +#endif memcpy(offset_ptr_ram, &val, sizeof(int)); } else { debug(" %p: rom reloc %x, ram %p, value %x, limit %x\n", diff --git a/arch/arm/config.mk b/arch/arm/config.mk index 98c1253..17b7408 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -108,7 +108,17 @@ endif # limit ourselves to the sections we want in the .bin. ifdef CONFIG_ARM64 -OBJCFLAGS += -j .text -j .rodata -j .data -j .u_boot_list -j .rela.dyn +OBJCOPYFLAGS += -j .text -j .rodata -j .data -j .u_boot_list -j .rela.dyn else -OBJCFLAGS += -j .text -j .rodata -j .hash -j .data -j .got.plt -j .u_boot_list -j .rel.dyn +OBJCOPYFLAGS += -j .text -j .rodata -j .hash -j .data -j .got.plt -j .u_boot_list -j .rel.dyn +endif + +ifneq ($(CONFIG_IMX_CONFIG),) +ifdef CONFIG_SPL +ifndef CONFIG_SPL_BUILD +ALL-y += SPL +endif +else +ALL-y += u-boot.imx +endif endif diff --git a/arch/arm/cpu/arm1136/config.mk b/arch/arm/cpu/arm1136/config.mk index f74228c..a82c6ce 100644 --- a/arch/arm/cpu/arm1136/config.mk +++ b/arch/arm/cpu/arm1136/config.mk @@ -7,13 +7,3 @@ # Make ARMv5 to allow more compilers to work, even though its v6. PLATFORM_CPPFLAGS += -march=armv5 - -ifneq ($(CONFIG_IMX_CONFIG),) -ifdef CONFIG_SPL -ifdef CONFIG_SPL_BUILD -ALL-y += $(OBJTREE)/SPL -endif -else -ALL-y += $(obj)u-boot.imx -endif -endif diff --git a/arch/arm/cpu/arm1176/bcm2835/config.mk b/arch/arm/cpu/arm1176/bcm2835/config.mk deleted file mode 100644 index b87ce24..0000000 --- a/arch/arm/cpu/arm1176/bcm2835/config.mk +++ /dev/null @@ -1,19 +0,0 @@ -# -# (C) Copyright 2012 Stephen Warren -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License -# version 2 as published by the Free Software Foundation. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# Don't attempt to override the target CPU/ABI options; -# the Raspberry Pi toolchain does the right thing by default. -PLATFORM_RELFLAGS := $(filter-out -msoft-float,$(PLATFORM_RELFLAGS)) -PLATFORM_CPPFLAGS := $(filter-out -march=armv5t,$(PLATFORM_CPPFLAGS)) diff --git a/arch/arm/cpu/arm720t/tegra-common/cpu.c b/arch/arm/cpu/arm720t/tegra-common/cpu.c index 72c69b9..2c5cd63 100644 --- a/arch/arm/cpu/arm720t/tegra-common/cpu.c +++ b/arch/arm/cpu/arm720t/tegra-common/cpu.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2010-2014, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -112,24 +112,38 @@ struct clk_pll_table tegra_pll_x_table[TEGRA_SOC_CNT][CLOCK_OSC_FREQ_COUNT] = { { .n = 116, .m = 1, .p = 1 }, /* OSC: 12.0 MHz */ { .n = 108, .m = 2, .p = 1 }, /* OSC: 26.0 MHz */ }, + + /* + * T124: 700 MHz + * + * Register Field Bits Width + * ------------------------------ + * PLLX_BASE p 23:20 4 + * PLLX_BASE n 15: 8 8 + * PLLX_BASE m 7: 0 8 + */ + { + { .n = 108, .m = 1, .p = 1 }, /* OSC: 13.0 MHz */ + { .n = 73, .m = 1, .p = 1 }, /* OSC: 19.2 MHz */ + { .n = 116, .m = 1, .p = 1 }, /* OSC: 12.0 MHz */ + { .n = 108, .m = 2, .p = 1 }, /* OSC: 26.0 MHz */ + }, }; -void adjust_pllp_out_freqs(void) +static inline void pllx_set_iddq(void) { +#if defined(CONFIG_TEGRA124) struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - struct clk_pll *pll = &clkrst->crc_pll[CLOCK_ID_PERIPH]; u32 reg; - /* Set T30 PLLP_OUT1, 2, 3 & 4 freqs to 9.6, 48, 102 & 204MHz */ - reg = readl(&pll->pll_out[0]); /* OUTA, contains OUT2 / OUT1 */ - reg |= (IN_408_OUT_48_DIVISOR << PLLP_OUT2_RATIO) | PLLP_OUT2_OVR - | (IN_408_OUT_9_6_DIVISOR << PLLP_OUT1_RATIO) | PLLP_OUT1_OVR; - writel(reg, &pll->pll_out[0]); - - reg = readl(&pll->pll_out[1]); /* OUTB, contains OUT4 / OUT3 */ - reg |= (IN_408_OUT_204_DIVISOR << PLLP_OUT4_RATIO) | PLLP_OUT4_OVR - | (IN_408_OUT_102_DIVISOR << PLLP_OUT3_RATIO) | PLLP_OUT3_OVR; - writel(reg, &pll->pll_out[1]); + /* Disable IDDQ */ + reg = readl(&clkrst->crc_pllx_misc3); + reg &= ~PLLX_IDDQ_MASK; + writel(reg, &clkrst->crc_pllx_misc3); + udelay(2); + debug("%s: IDDQ: PLLX IDDQ = 0x%08X\n", __func__, + readl(&clkrst->crc_pllx_misc3)); +#endif } int pllx_set_rate(struct clk_pll_simple *pll , u32 divn, u32 divm, @@ -146,6 +160,8 @@ int pllx_set_rate(struct clk_pll_simple *pll , u32 divn, u32 divm, debug(" pllx_set_rate entry\n"); + pllx_set_iddq(); + /* Set BYPASS, m, n and p to PLLX_BASE */ reg = PLL_BYPASS_MASK | (divm << PLL_DIVM_SHIFT); reg |= ((divn << PLL_DIVN_SHIFT) | (divp << PLL_DIVP_SHIFT)); @@ -162,18 +178,23 @@ int pllx_set_rate(struct clk_pll_simple *pll , u32 divn, u32 divm, reg |= (1 << PLL_DCCON_SHIFT); writel(reg, &pll->pll_misc); - /* Enable PLLX */ - reg = readl(&pll->pll_base); - reg |= PLL_ENABLE_MASK; - /* Disable BYPASS */ + reg = readl(&pll->pll_base); reg &= ~PLL_BYPASS_MASK; writel(reg, &pll->pll_base); + debug("pllx_set_rate: base = 0x%08X\n", reg); /* Set lock_enable to PLLX_MISC */ reg = readl(&pll->pll_misc); reg |= PLL_LOCK_ENABLE_MASK; writel(reg, &pll->pll_misc); + debug("pllx_set_rate: misc = 0x%08X\n", reg); + + /* Enable PLLX last, once it's all configured */ + reg = readl(&pll->pll_base); + reg |= PLL_ENABLE_MASK; + writel(reg, &pll->pll_base); + debug("pllx_set_rate: base final = 0x%08X\n", reg); return 0; } @@ -207,12 +228,6 @@ void init_pllx(void) /* set pllx */ sel = &tegra_pll_x_table[chip_sku][osc]; pllx_set_rate(pll, sel->n, sel->m, sel->p, sel->cpcon); - - /* adjust PLLP_out1-4 on T3x/T114 */ - if (soc_type >= CHIPID_TEGRA30) { - debug(" init_pllx: adjusting PLLP out freqs\n"); - adjust_pllp_out_freqs(); - } } void enable_cpu_clock(int enable) @@ -334,7 +349,6 @@ void reset_A9_cpu(int reset) void clock_enable_coresight(int enable) { u32 rst, src = 2; - int soc_type; debug("clock_enable_coresight entry\n"); clock_set_enable(PERIPH_ID_CORESIGHT, enable); @@ -343,20 +357,11 @@ void clock_enable_coresight(int enable) if (enable) { /* * Put CoreSight on PLLP_OUT0 and divide it down as per - * PLLP base frequency based on SoC type (T20/T30/T114). + * PLLP base frequency based on SoC type (T20/T30+). * Clock divider request would setup CSITE clock as 144MHz * for PLLP base 216MHz and 204MHz for PLLP base 408MHz */ - - soc_type = tegra_get_chip(); - if (soc_type == CHIPID_TEGRA30 || soc_type == CHIPID_TEGRA114) - src = CLK_DIVIDER(NVBL_PLLP_KHZ, 204000); - else if (soc_type == CHIPID_TEGRA20) - src = CLK_DIVIDER(NVBL_PLLP_KHZ, 144000); - else - printf("%s: Unknown SoC type %X!\n", - __func__, soc_type); - + src = CLK_DIVIDER(NVBL_PLLP_KHZ, CSITE_KHZ); clock_ll_set_source_divisor(PERIPH_ID_CSI, 0, src); /* Unlock the CPU CoreSight interfaces */ diff --git a/arch/arm/cpu/arm720t/tegra-common/cpu.h b/arch/arm/cpu/arm720t/tegra-common/cpu.h index 60412c7..b4ca44f 100644 --- a/arch/arm/cpu/arm720t/tegra-common/cpu.h +++ b/arch/arm/cpu/arm720t/tegra-common/cpu.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2010-2011 + * (C) Copyright 2010-2014 * NVIDIA Corporation <www.nvidia.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -11,9 +11,12 @@ #define IO_STABILIZATION_DELAY (1000) #if defined(CONFIG_TEGRA20) -#define NVBL_PLLP_KHZ (216000) -#elif defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA114) -#define NVBL_PLLP_KHZ (408000) +#define NVBL_PLLP_KHZ 216000 +#define CSITE_KHZ 144000 +#elif defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA114) || \ + defined(CONFIG_TEGRA124) +#define NVBL_PLLP_KHZ 408000 +#define CSITE_KHZ 204000 #else #error "Unknown Tegra chip!" #endif @@ -68,3 +71,4 @@ int tegra_get_chip(void); int tegra_get_sku_info(void); int tegra_get_chip_sku(void); void adjust_pllp_out_freqs(void); +void pmic_enable_cpu_vdd(void); diff --git a/arch/arm/cpu/arm720t/tegra114/cpu.c b/arch/arm/cpu/arm720t/tegra114/cpu.c index 51ecff7..d10b96a 100644 --- a/arch/arm/cpu/arm720t/tegra114/cpu.c +++ b/arch/arm/cpu/arm720t/tegra114/cpu.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2010-2014, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -68,7 +68,7 @@ static void enable_cpu_clocks(void) /* Wait for PLL-X to lock */ do { reg = readl(&clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base); - } while ((reg & (1 << 27)) == 0); + } while ((reg & PLL_LOCK_MASK) == 0); /* Wait until all clocks are stable */ udelay(PLL_STABILIZATION_DELAY); @@ -126,18 +126,6 @@ void t114_init_clocks(void) /* Set active CPU cluster to G */ clrbits_le32(&flow->cluster_control, 1); - /* - * Switch system clock to PLLP_OUT4 (108 MHz), AVP will now run - * at 108 MHz. This is glitch free as only the source is changed, no - * special precaution needed. - */ - val = (SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_FIQ_SOURCE_SHIFT) | - (SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_IRQ_SOURCE_SHIFT) | - (SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_RUN_SOURCE_SHIFT) | - (SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_IDLE_SOURCE_SHIFT) | - (SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT); - writel(val, &clkrst->crc_sclk_brst_pol); - writel(SUPER_SCLK_ENB_MASK, &clkrst->crc_super_sclk_div); debug("Setting up PLLX\n"); @@ -204,45 +192,43 @@ void t114_init_clocks(void) debug("t114_init_clocks exit\n"); } -static int is_partition_powered(u32 mask) +static bool is_partition_powered(u32 partid) { struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; u32 reg; /* Get power gate status */ reg = readl(&pmc->pmc_pwrgate_status); - return (reg & mask) == mask; + return !!(reg & (1 << partid)); } -static int is_clamp_enabled(u32 mask) +static bool is_clamp_enabled(u32 partid) { struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; u32 reg; - /* Get clamp status. TODO: Add pmc_clamp_status alias to pmc.h */ - reg = readl(&pmc->pmc_pwrgate_timer_on); - return (reg & mask) == mask; + /* Get clamp status. */ + reg = readl(&pmc->pmc_clamp_status); + return !!(reg & (1 << partid)); } -static void power_partition(u32 status, u32 partid) +static void power_partition(u32 partid) { struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; - debug("%s: status = %08X, part ID = %08X\n", __func__, status, partid); + debug("%s: part ID = %08X\n", __func__, partid); /* Is the partition already on? */ - if (!is_partition_powered(status)) { + if (!is_partition_powered(partid)) { /* No, toggle the partition power state (OFF -> ON) */ debug("power_partition, toggling state\n"); - clrbits_le32(&pmc->pmc_pwrgate_toggle, 0x1F); - setbits_le32(&pmc->pmc_pwrgate_toggle, partid); - setbits_le32(&pmc->pmc_pwrgate_toggle, START_CP); + writel(START_CP | partid, &pmc->pmc_pwrgate_toggle); /* Wait for the power to come up */ - while (!is_partition_powered(status)) + while (!is_partition_powered(partid)) ; /* Wait for the clamp status to be cleared */ - while (is_clamp_enabled(status)) + while (is_clamp_enabled(partid)) ; /* Give I/O signals time to stabilize */ @@ -257,13 +243,13 @@ void powerup_cpus(void) /* We boot to the fast cluster */ debug("powerup_cpus entry: G cluster\n"); /* Power up the fast cluster rail partition */ - power_partition(CRAIL, CRAILID); + power_partition(CRAIL); /* Power up the fast cluster non-CPU partition */ - power_partition(C0NC, C0NCID); + power_partition(C0NC); /* Power up the fast cluster CPU0 partition */ - power_partition(CE0, CE0ID); + power_partition(CE0); } void start_cpu(u32 reset_vector) diff --git a/arch/arm/cpu/arm720t/tegra124/Makefile b/arch/arm/cpu/arm720t/tegra124/Makefile new file mode 100644 index 0000000..61abf45 --- /dev/null +++ b/arch/arm/cpu/arm720t/tegra124/Makefile @@ -0,0 +1,8 @@ +# +# (C) Copyright 2013-2014 +# NVIDIA Corporation <www.nvidia.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += cpu.o diff --git a/arch/arm/cpu/arm720t/tegra124/config.mk b/arch/arm/cpu/arm720t/tegra124/config.mk new file mode 100644 index 0000000..5e10701 --- /dev/null +++ b/arch/arm/cpu/arm720t/tegra124/config.mk @@ -0,0 +1,7 @@ +# +# (C) Copyright 2010-2013 +# NVIDIA Corporation <www.nvidia.com> +# +# SPDX-License-Identifier: GPL-2.0+ +#/ +USE_PRIVATE_LIBGCC = yes diff --git a/arch/arm/cpu/arm720t/tegra124/cpu.c b/arch/arm/cpu/arm720t/tegra124/cpu.c new file mode 100644 index 0000000..c03aaf1 --- /dev/null +++ b/arch/arm/cpu/arm720t/tegra124/cpu.c @@ -0,0 +1,265 @@ +/* + * (C) Copyright 2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/ahb.h> +#include <asm/arch/clock.h> +#include <asm/arch/flow.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/tegra.h> +#include <asm/arch-tegra/clk_rst.h> +#include <asm/arch-tegra/pmc.h> +#include <asm/arch-tegra/ap.h> +#include "../tegra-common/cpu.h" + +/* Tegra124-specific CPU init code */ + +static void enable_cpu_power_rail(void) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + + debug("enable_cpu_power_rail entry\n"); + + /* un-tristate PWR_I2C SCL/SDA, rest of the defaults are correct */ + pinmux_tristate_disable(PINGRP_PWR_I2C_SCL); + pinmux_tristate_disable(PINGRP_PWR_I2C_SDA); + + pmic_enable_cpu_vdd(); + + /* + * Set CPUPWRGOOD_TIMER - APB clock is 1/2 of SCLK (102MHz), + * set it for 5ms as per SysEng (102MHz*5ms = 510000 (7C830h). + */ + writel(0x7C830, &pmc->pmc_cpupwrgood_timer); + + /* Set polarity to 0 (normal) and enable CPUPWRREQ_OE */ + clrbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_POL); + setbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_OE); +} + +static void enable_cpu_clocks(void) +{ + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 reg; + + debug("enable_cpu_clocks entry\n"); + + /* Wait for PLL-X to lock */ + do { + reg = readl(&clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base); + debug("%s: PLLX base = 0x%08X\n", __func__, reg); + } while ((reg & PLL_LOCK_MASK) == 0); + + debug("%s: PLLX locked, delay for stable clocks\n", __func__); + /* Wait until all clocks are stable */ + udelay(PLL_STABILIZATION_DELAY); + + debug("%s: Setting CCLK_BURST and DIVIDER\n", __func__); + writel(CCLK_BURST_POLICY, &clkrst->crc_cclk_brst_pol); + writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div); + + debug("%s: Enabling clock to all CPUs\n", __func__); + /* Enable the clock to all CPUs */ + reg = CLR_CPU3_CLK_STP | CLR_CPU2_CLK_STP | CLR_CPU1_CLK_STP | + CLR_CPU0_CLK_STP; + writel(reg, &clkrst->crc_clk_cpu_cmplx_clr); + + debug("%s: Enabling main CPU complex clocks\n", __func__); + /* Always enable the main CPU complex clocks */ + clock_enable(PERIPH_ID_CPU); + clock_enable(PERIPH_ID_CPULP); + clock_enable(PERIPH_ID_CPUG); + + debug("%s: Done\n", __func__); +} + +static void remove_cpu_resets(void) +{ + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 reg; + + debug("remove_cpu_resets entry\n"); + + /* Take the slow and fast partitions out of reset */ + reg = CLR_NONCPURESET; + writel(reg, &clkrst->crc_rst_cpulp_cmplx_clr); + writel(reg, &clkrst->crc_rst_cpug_cmplx_clr); + + /* Clear the SW-controlled reset of the slow cluster */ + reg = CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0 | + CLR_L2RESET | CLR_PRESETDBG; + writel(reg, &clkrst->crc_rst_cpulp_cmplx_clr); + + /* Clear the SW-controlled reset of the fast cluster */ + reg = CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0 | + CLR_CPURESET1 | CLR_DBGRESET1 | CLR_CORERESET1 | CLR_CXRESET1 | + CLR_CPURESET2 | CLR_DBGRESET2 | CLR_CORERESET2 | CLR_CXRESET2 | + CLR_CPURESET3 | CLR_DBGRESET3 | CLR_CORERESET3 | CLR_CXRESET3 | + CLR_L2RESET | CLR_PRESETDBG; + writel(reg, &clkrst->crc_rst_cpug_cmplx_clr); +} + +/** + * The Tegra124 requires some special clock initialization, including setting up + * the DVC I2C, turning on MSELECT and selecting the G CPU cluster + */ +void tegra124_init_clocks(void) +{ + struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE; + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 val; + + debug("tegra124_init_clocks entry\n"); + + /* Set active CPU cluster to G */ + clrbits_le32(&flow->cluster_control, 1); + + /* Change the oscillator drive strength */ + val = readl(&clkrst->crc_osc_ctrl); + val &= ~OSC_XOFS_MASK; + val |= (OSC_DRIVE_STRENGTH << OSC_XOFS_SHIFT); + writel(val, &clkrst->crc_osc_ctrl); + + /* Update same value in PMC_OSC_EDPD_OVER XOFS field for warmboot */ + val = readl(&pmc->pmc_osc_edpd_over); + val &= ~PMC_XOFS_MASK; + val |= (OSC_DRIVE_STRENGTH << PMC_XOFS_SHIFT); + writel(val, &pmc->pmc_osc_edpd_over); + + /* Set HOLD_CKE_LOW_EN to 1 */ + setbits_le32(&pmc->pmc_cntrl2, HOLD_CKE_LOW_EN); + + debug("Setting up PLLX\n"); + init_pllx(); + + val = (1 << CLK_SYS_RATE_AHB_RATE_SHIFT); + writel(val, &clkrst->crc_clk_sys_rate); + + /* Enable clocks to required peripherals. TBD - minimize this list */ + debug("Enabling clocks\n"); + + clock_set_enable(PERIPH_ID_CACHE2, 1); + clock_set_enable(PERIPH_ID_GPIO, 1); + clock_set_enable(PERIPH_ID_TMR, 1); + clock_set_enable(PERIPH_ID_CPU, 1); + clock_set_enable(PERIPH_ID_EMC, 1); + clock_set_enable(PERIPH_ID_I2C5, 1); + clock_set_enable(PERIPH_ID_APBDMA, 1); + clock_set_enable(PERIPH_ID_MEM, 1); + clock_set_enable(PERIPH_ID_CORESIGHT, 1); + clock_set_enable(PERIPH_ID_MSELECT, 1); + clock_set_enable(PERIPH_ID_DVFS, 1); + + /* + * Set MSELECT clock source as PLLP (00), and ask for a clock + * divider that would set the MSELECT clock at 102MHz for a + * PLLP base of 408MHz. + */ + clock_ll_set_source_divisor(PERIPH_ID_MSELECT, 0, + CLK_DIVIDER(NVBL_PLLP_KHZ, 102000)); + + /* Give clock time to stabilize */ + udelay(IO_STABILIZATION_DELAY); + + /* I2C5 (DVC) gets CLK_M and a divisor of 17 */ + clock_ll_set_source_divisor(PERIPH_ID_I2C5, 3, 16); + + /* Give clock time to stabilize */ + udelay(IO_STABILIZATION_DELAY); + + /* Take required peripherals out of reset */ + debug("Taking periphs out of reset\n"); + reset_set_enable(PERIPH_ID_CACHE2, 0); + reset_set_enable(PERIPH_ID_GPIO, 0); + reset_set_enable(PERIPH_ID_TMR, 0); + reset_set_enable(PERIPH_ID_COP, 0); + reset_set_enable(PERIPH_ID_EMC, 0); + reset_set_enable(PERIPH_ID_I2C5, 0); + reset_set_enable(PERIPH_ID_APBDMA, 0); + reset_set_enable(PERIPH_ID_MEM, 0); + reset_set_enable(PERIPH_ID_CORESIGHT, 0); + reset_set_enable(PERIPH_ID_MSELECT, 0); + reset_set_enable(PERIPH_ID_DVFS, 0); + + debug("tegra124_init_clocks exit\n"); +} + +static bool is_partition_powered(u32 partid) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + u32 reg; + + /* Get power gate status */ + reg = readl(&pmc->pmc_pwrgate_status); + return !!(reg & (1 << partid)); +} + +static void power_partition(u32 partid) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + + debug("%s: part ID = %08X\n", __func__, partid); + /* Is the partition already on? */ + if (!is_partition_powered(partid)) { + /* No, toggle the partition power state (OFF -> ON) */ + debug("power_partition, toggling state\n"); + writel(START_CP | partid, &pmc->pmc_pwrgate_toggle); + + /* Wait for the power to come up */ + while (!is_partition_powered(partid)) + ; + + /* Give I/O signals time to stabilize */ + udelay(IO_STABILIZATION_DELAY); + } +} + +void powerup_cpus(void) +{ + debug("powerup_cpus entry\n"); + + /* We boot to the fast cluster */ + debug("powerup_cpus entry: G cluster\n"); + + /* Power up the fast cluster rail partition */ + debug("powerup_cpus: CRAIL\n"); + power_partition(CRAIL); + + /* Power up the fast cluster non-CPU partition */ + debug("powerup_cpus: C0NC\n"); + power_partition(C0NC); + + /* Power up the fast cluster CPU0 partition */ + debug("powerup_cpus: CE0\n"); + power_partition(CE0); + + debug("powerup_cpus: done\n"); +} + +void start_cpu(u32 reset_vector) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + + debug("start_cpu entry, reset_vector = %x\n", reset_vector); + + tegra124_init_clocks(); + + /* Set power-gating timer multiplier */ + clrbits_le32(&pmc->pmc_pwrgate_timer_mult, TIMER_MULT_MASK); + setbits_le32(&pmc->pmc_pwrgate_timer_mult, MULT_8); + + enable_cpu_power_rail(); + enable_cpu_clocks(); + clock_enable_coresight(1); + remove_cpu_resets(); + writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR); + powerup_cpus(); + debug("start_cpu exit, should continue @ reset_vector\n"); +} diff --git a/arch/arm/cpu/arm720t/tegra30/cpu.c b/arch/arm/cpu/arm720t/tegra30/cpu.c index e162357..a806483 100644 --- a/arch/arm/cpu/arm720t/tegra30/cpu.c +++ b/arch/arm/cpu/arm720t/tegra30/cpu.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2010-2014, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -84,18 +84,6 @@ void t30_init_clocks(void) /* Set active CPU cluster to G */ clrbits_le32(flow->cluster_control, 1 << 0); - /* - * Switch system clock to PLLP_OUT4 (108 MHz), AVP will now run - * at 108 MHz. This is glitch free as only the source is changed, no - * special precaution needed. - */ - val = (SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_FIQ_SOURCE_SHIFT) | - (SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_IRQ_SOURCE_SHIFT) | - (SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_RUN_SOURCE_SHIFT) | - (SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_IDLE_SOURCE_SHIFT) | - (SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT); - writel(val, &clkrst->crc_sclk_brst_pol); - writel(SUPER_SCLK_ENB_MASK, &clkrst->crc_super_sclk_div); val = (0 << CLK_SYS_RATE_HCLK_DISABLE_SHIFT) | diff --git a/arch/arm/cpu/arm926ejs/config.mk b/arch/arm/cpu/arm926ejs/config.mk index 4d9895f..bdb3da1 100644 --- a/arch/arm/cpu/arm926ejs/config.mk +++ b/arch/arm/cpu/arm926ejs/config.mk @@ -6,13 +6,3 @@ # PLATFORM_CPPFLAGS += -march=armv5te - -ifneq ($(CONFIG_IMX_CONFIG),) -ifdef CONFIG_SPL -ifdef CONFIG_SPL_BUILD -ALL-y += $(OBJTREE)/SPL -endif -else -ALL-y += $(obj)u-boot.imx -endif -endif diff --git a/arch/arm/cpu/arm926ejs/davinci/config.mk b/arch/arm/cpu/arm926ejs/davinci/config.mk index d5c978b..69e9d5a 100644 --- a/arch/arm/cpu/arm926ejs/davinci/config.mk +++ b/arch/arm/cpu/arm926ejs/davinci/config.mk @@ -4,5 +4,5 @@ # SPDX-License-Identifier: GPL-2.0+ # ifndef CONFIG_SPL_BUILD -ALL-$(CONFIG_SPL_FRAMEWORK) += $(obj)u-boot.ais +ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.ais endif diff --git a/arch/arm/cpu/arm926ejs/omap/Makefile b/arch/arm/cpu/arm926ejs/omap/Makefile index bd0a2fb..add9232 100644 --- a/arch/arm/cpu/arm926ejs/omap/Makefile +++ b/arch/arm/cpu/arm926ejs/omap/Makefile @@ -5,5 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y = timer.o cpuinfo.o +obj-y = timer.o +obj-$(CONFIG_DISPLAY_CPUINFO) += cpuinfo.o obj-y += reset.o diff --git a/arch/arm/cpu/arm926ejs/omap/cpuinfo.c b/arch/arm/cpu/arm926ejs/omap/cpuinfo.c index 02332ee..587d99a 100644 --- a/arch/arm/cpu/arm926ejs/omap/cpuinfo.c +++ b/arch/arm/cpu/arm926ejs/omap/cpuinfo.c @@ -13,7 +13,7 @@ #include <command.h> #include <linux/compiler.h> -#if defined(CONFIG_DISPLAY_CPUINFO) && defined(CONFIG_OMAP) +#if defined(CONFIG_OMAP) #define omap_readw(x) *(volatile unsigned short *)(x) #define omap_readl(x) *(volatile unsigned long *)(x) @@ -239,4 +239,4 @@ int print_cpuinfo (void) return 0; } -#endif /* #if defined(CONFIG_DISPLAY_CPUINFO) && defined(CONFIG_OMAP) */ +#endif /* #if defined(CONFIG_OMAP) */ diff --git a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c index 97c00b4..fb654bb 100644 --- a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c +++ b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c @@ -98,6 +98,7 @@ void enable_basic_clocks(void) &cmper->emiffwclkctrl, &cmper->emifclkctrl, &cmper->otfaemifclkctrl, + &cmper->qspiclkctrl, 0 }; diff --git a/arch/arm/cpu/armv7/am33xx/config.mk b/arch/arm/cpu/armv7/am33xx/config.mk index 8e3668f..5294d16 100644 --- a/arch/arm/cpu/armv7/am33xx/config.mk +++ b/arch/arm/cpu/armv7/am33xx/config.mk @@ -4,8 +4,8 @@ # SPDX-License-Identifier: GPL-2.0+ # ifdef CONFIG_SPL_BUILD -ALL-y += $(OBJTREE)/MLO -ALL-$(CONFIG_SPL_SPI_SUPPORT) += $(OBJTREE)/MLO.byteswap +ALL-y += MLO +ALL-$(CONFIG_SPL_SPI_SUPPORT) += MLO.byteswap else -ALL-y += $(obj)u-boot.img +ALL-y += u-boot.img endif diff --git a/arch/arm/cpu/armv7/config.mk b/arch/arm/cpu/armv7/config.mk index 38b7c40..247b7a5 100644 --- a/arch/arm/cpu/armv7/config.mk +++ b/arch/arm/cpu/armv7/config.mk @@ -13,13 +13,3 @@ PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARMV7) # SEE README.arm-unaligned-accesses PF_NO_UNALIGNED := $(call cc-option, -mno-unaligned-access,) PLATFORM_NO_UNALIGNED := $(PF_NO_UNALIGNED) - -ifneq ($(CONFIG_IMX_CONFIG),) -ifdef CONFIG_SPL -ifdef CONFIG_SPL_BUILD -ALL-y += $(OBJTREE)/SPL -endif -else -ALL-y += $(obj)u-boot.imx -endif -endif diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c index 5bde9d1..1fea4d6 100644 --- a/arch/arm/cpu/armv7/exynos/clock.c +++ b/arch/arm/cpu/armv7/exynos/clock.c @@ -26,7 +26,7 @@ struct clk_bit_info { }; /* src_bit div_bit prediv_bit */ -static struct clk_bit_info clk_bit_info[PERIPH_ID_COUNT] = { +static struct clk_bit_info clk_bit_info[] = { {0, 0, -1}, {4, 4, -1}, {8, 8, -1}, @@ -870,7 +870,6 @@ static void exynos4_set_mmc_clk(int dev_index, unsigned int div) struct exynos4_clock *clk = (struct exynos4_clock *)samsung_get_base_clock(); unsigned int addr; - unsigned int val; /* * CLK_DIV_FSYS1 @@ -890,10 +889,8 @@ static void exynos4_set_mmc_clk(int dev_index, unsigned int div) dev_index -= 2; } - val = readl(addr); - val &= ~(0xff << ((dev_index << 4) + 8)); - val |= (div & 0xff) << ((dev_index << 4) + 8); - writel(val, addr); + clrsetbits_le32(addr, 0xff << ((dev_index << 4) + 8), + (div & 0xff) << ((dev_index << 4) + 8)); } /* exynos4x12: set the mmc clock */ @@ -902,7 +899,6 @@ static void exynos4x12_set_mmc_clk(int dev_index, unsigned int div) struct exynos4x12_clock *clk = (struct exynos4x12_clock *)samsung_get_base_clock(); unsigned int addr; - unsigned int val; /* * CLK_DIV_FSYS1 @@ -917,10 +913,8 @@ static void exynos4x12_set_mmc_clk(int dev_index, unsigned int div) dev_index -= 2; } - val = readl(addr); - val &= ~(0xff << ((dev_index << 4) + 8)); - val |= (div & 0xff) << ((dev_index << 4) + 8); - writel(val, addr); + clrsetbits_le32(addr, 0xff << ((dev_index << 4) + 8), + (div & 0xff) << ((dev_index << 4) + 8)); } /* exynos5: set the mmc clock */ @@ -929,7 +923,6 @@ static void exynos5_set_mmc_clk(int dev_index, unsigned int div) struct exynos5_clock *clk = (struct exynos5_clock *)samsung_get_base_clock(); unsigned int addr; - unsigned int val; /* * CLK_DIV_FSYS1 @@ -944,10 +937,8 @@ static void exynos5_set_mmc_clk(int dev_index, unsigned int div) dev_index -= 2; } - val = readl(addr); - val &= ~(0xff << ((dev_index << 4) + 8)); - val |= (div & 0xff) << ((dev_index << 4) + 8); - writel(val, addr); + clrsetbits_le32(addr, 0xff << ((dev_index << 4) + 8), + (div & 0xff) << ((dev_index << 4) + 8)); } /* exynos5: set the mmc clock */ @@ -956,7 +947,7 @@ static void exynos5420_set_mmc_clk(int dev_index, unsigned int div) struct exynos5420_clock *clk = (struct exynos5420_clock *)samsung_get_base_clock(); unsigned int addr; - unsigned int val, shift; + unsigned int shift; /* * CLK_DIV_FSYS1 @@ -967,10 +958,7 @@ static void exynos5420_set_mmc_clk(int dev_index, unsigned int div) addr = (unsigned int)&clk->div_fsys1; shift = dev_index * 10; - val = readl(addr); - val &= ~(0x3ff << shift); - val |= (div & 0x3ff) << shift; - writel(val, addr); + clrsetbits_le32(addr, 0x3ff << shift, (div & 0x3ff) << shift); } /* get_lcd_clk: return lcd clock frequency */ @@ -1061,7 +1049,6 @@ void exynos4_set_lcd_clk(void) { struct exynos4_clock *clk = (struct exynos4_clock *)samsung_get_base_clock(); - unsigned int cfg = 0; /* * CLK_GATE_BLOCK @@ -1073,9 +1060,7 @@ void exynos4_set_lcd_clk(void) * CLK_LCD1 [5] * CLK_GPS [7] */ - cfg = readl(&clk->gate_block); - cfg |= 1 << 4; - writel(cfg, &clk->gate_block); + setbits_le32(&clk->gate_block, 1 << 4); /* * CLK_SRC_LCD0 @@ -1085,10 +1070,7 @@ void exynos4_set_lcd_clk(void) * MIPI0_SEL [12:15] * set lcd0 src clock 0x6: SCLK_MPLL */ - cfg = readl(&clk->src_lcd0); - cfg &= ~(0xf); - cfg |= 0x6; - writel(cfg, &clk->src_lcd0); + clrsetbits_le32(&clk->src_lcd0, 0xf, 0x6); /* * CLK_GATE_IP_LCD0 @@ -1100,9 +1082,7 @@ void exynos4_set_lcd_clk(void) * CLK_PPMULCD0 [5] * Gating all clocks for FIMD0 */ - cfg = readl(&clk->gate_ip_lcd0); - cfg |= 1 << 0; - writel(cfg, &clk->gate_ip_lcd0); + setbits_le32(&clk->gate_ip_lcd0, 1 << 0); /* * CLK_DIV_LCD0 @@ -1114,16 +1094,13 @@ void exynos4_set_lcd_clk(void) * MIPI0_PRE_RATIO [23:20] * set fimd ratio */ - cfg &= ~(0xf); - cfg |= 0x1; - writel(cfg, &clk->div_lcd0); + clrsetbits_le32(&clk->div_lcd0, 0xf, 0x1); } void exynos5_set_lcd_clk(void) { struct exynos5_clock *clk = (struct exynos5_clock *)samsung_get_base_clock(); - unsigned int cfg = 0; /* * CLK_GATE_BLOCK @@ -1135,9 +1112,7 @@ void exynos5_set_lcd_clk(void) * CLK_LCD1 [5] * CLK_GPS [7] */ - cfg = readl(&clk->gate_block); - cfg |= 1 << 4; - writel(cfg, &clk->gate_block); + setbits_le32(&clk->gate_block, 1 << 4); /* * CLK_SRC_LCD0 @@ -1147,10 +1122,7 @@ void exynos5_set_lcd_clk(void) * MIPI0_SEL [12:15] * set lcd0 src clock 0x6: SCLK_MPLL */ - cfg = readl(&clk->src_disp1_0); - cfg &= ~(0xf); - cfg |= 0x6; - writel(cfg, &clk->src_disp1_0); + clrsetbits_le32(&clk->src_disp1_0, 0xf, 0x6); /* * CLK_GATE_IP_LCD0 @@ -1162,9 +1134,7 @@ void exynos5_set_lcd_clk(void) * CLK_PPMULCD0 [5] * Gating all clocks for FIMD0 */ - cfg = readl(&clk->gate_ip_disp1); - cfg |= 1 << 0; - writel(cfg, &clk->gate_ip_disp1); + setbits_le32(&clk->gate_ip_disp1, 1 << 0); /* * CLK_DIV_LCD0 @@ -1176,16 +1146,13 @@ void exynos5_set_lcd_clk(void) * MIPI0_PRE_RATIO [23:20] * set fimd ratio */ - cfg &= ~(0xf); - cfg |= 0x0; - writel(cfg, &clk->div_disp1_0); + clrsetbits_le32(&clk->div_disp1_0, 0xf, 0x0); } void exynos4_set_mipi_clk(void) { struct exynos4_clock *clk = (struct exynos4_clock *)samsung_get_base_clock(); - unsigned int cfg = 0; /* * CLK_SRC_LCD0 @@ -1195,10 +1162,7 @@ void exynos4_set_mipi_clk(void) * MIPI0_SEL [12:15] * set mipi0 src clock 0x6: SCLK_MPLL */ - cfg = readl(&clk->src_lcd0); - cfg &= ~(0xf << 12); - cfg |= (0x6 << 12); - writel(cfg, &clk->src_lcd0); + clrsetbits_le32(&clk->src_lcd0, 0xf << 12, 0x6 << 12); /* * CLK_SRC_MASK_LCD0 @@ -1208,9 +1172,7 @@ void exynos4_set_mipi_clk(void) * MIPI0_MASK [12] * set src mask mipi0 0x1: Unmask */ - cfg = readl(&clk->src_mask_lcd0); - cfg |= (0x1 << 12); - writel(cfg, &clk->src_mask_lcd0); + setbits_le32(&clk->src_mask_lcd0, 0x1 << 12); /* * CLK_GATE_IP_LCD0 @@ -1222,9 +1184,7 @@ void exynos4_set_mipi_clk(void) * CLK_PPMULCD0 [5] * Gating all clocks for MIPI0 */ - cfg = readl(&clk->gate_ip_lcd0); - cfg |= 1 << 3; - writel(cfg, &clk->gate_ip_lcd0); + setbits_le32(&clk->gate_ip_lcd0, 1 << 3); /* * CLK_DIV_LCD0 @@ -1236,9 +1196,7 @@ void exynos4_set_mipi_clk(void) * MIPI0_PRE_RATIO [23:20] * set mipi ratio */ - cfg &= ~(0xf << 16); - cfg |= (0x1 << 16); - writel(cfg, &clk->div_lcd0); + clrsetbits_le32(&clk->div_lcd0, 0xf << 16, 0x1 << 16); } /* diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c index 904177a..645c497 100644 --- a/arch/arm/cpu/armv7/exynos/pinmux.c +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -751,12 +751,7 @@ static int exynos5_pinmux_decode_periph_id(const void *blob, int node) if (err) return PERIPH_ID_NONE; - /* check for invalid peripheral id */ - if ((PERIPH_ID_SDMMC4 > cell[1]) || (cell[1] < PERIPH_ID_UART0)) - return cell[1]; - - debug(" invalid peripheral id\n"); - return PERIPH_ID_NONE; + return cell[1]; } int pinmux_decode_periph_id(const void *blob, int node) diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index 5617a41..bd65a08 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -409,20 +409,15 @@ u32 imx_get_uartclk(void) u32 imx_get_fecclk(void) { - return decode_pll(PLL_ENET, MXC_HCLK); + return mxc_get_clock(MXC_IPG_CLK); } -int enable_sata_clock(void) +static int enable_enet_pll(uint32_t en) { - u32 reg = 0; - s32 timeout = 100000; struct mxc_ccm_reg *const imx_ccm = (struct mxc_ccm_reg *) CCM_BASE_ADDR; - - /* Enable sata clock */ - reg = readl(&imx_ccm->CCGR5); /* CCGR5 */ - reg |= MXC_CCM_CCGR5_SATA_MASK; - writel(reg, &imx_ccm->CCGR5); + s32 timeout = 100000; + u32 reg = 0; /* Enable PLLs */ reg = readl(&imx_ccm->analog_pll_enet); @@ -437,10 +432,70 @@ int enable_sata_clock(void) return -EIO; reg &= ~BM_ANADIG_PLL_SYS_BYPASS; writel(reg, &imx_ccm->analog_pll_enet); - reg |= BM_ANADIG_PLL_ENET_ENABLE_SATA; + reg |= en; writel(reg, &imx_ccm->analog_pll_enet); + return 0; +} - return 0 ; +static void ungate_sata_clock(void) +{ + struct mxc_ccm_reg *const imx_ccm = + (struct mxc_ccm_reg *)CCM_BASE_ADDR; + + /* Enable SATA clock. */ + setbits_le32(&imx_ccm->CCGR5, MXC_CCM_CCGR5_SATA_MASK); +} + +static void ungate_pcie_clock(void) +{ + struct mxc_ccm_reg *const imx_ccm = + (struct mxc_ccm_reg *)CCM_BASE_ADDR; + + /* Enable PCIe clock. */ + setbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_PCIE_MASK); +} + +int enable_sata_clock(void) +{ + ungate_sata_clock(); + return enable_enet_pll(BM_ANADIG_PLL_ENET_ENABLE_SATA); +} + +int enable_pcie_clock(void) +{ + struct anatop_regs *anatop_regs = + (struct anatop_regs *)ANATOP_BASE_ADDR; + struct mxc_ccm_reg *ccm_regs = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + + /* + * Here be dragons! + * + * The register ANATOP_MISC1 is not documented in the Freescale + * MX6RM. The register that is mapped in the ANATOP space and + * marked as ANATOP_MISC1 is actually documented in the PMU section + * of the datasheet as PMU_MISC1. + * + * Switch LVDS clock source to SATA (0xb), disable clock INPUT and + * enable clock OUTPUT. This is important for PCI express link that + * is clocked from the i.MX6. + */ +#define ANADIG_ANA_MISC1_LVDSCLK1_IBEN (1 << 12) +#define ANADIG_ANA_MISC1_LVDSCLK1_OBEN (1 << 10) +#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_MASK 0x0000001F + clrsetbits_le32(&anatop_regs->ana_misc1, + ANADIG_ANA_MISC1_LVDSCLK1_IBEN | + ANADIG_ANA_MISC1_LVDS1_CLK_SEL_MASK, + ANADIG_ANA_MISC1_LVDSCLK1_OBEN | 0xb); + + /* PCIe reference clock sourced from AXI. */ + clrbits_le32(&ccm_regs->cbcmr, MXC_CCM_CBCMR_PCIE_AXI_CLK_SEL); + + /* Party time! Ungate the clock to the PCIe. */ + ungate_sata_clock(); + ungate_pcie_clock(); + + return enable_enet_pll(BM_ANADIG_PLL_ENET_ENABLE_SATA | + BM_ANADIG_PLL_ENET_ENABLE_PCIE); } unsigned int mxc_get_clock(enum mxc_clock clk) diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 0208cba..1725279 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -8,6 +8,8 @@ */ #include <common.h> +#include <asm/armv7.h> +#include <asm/pl310.h> #include <asm/errno.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> @@ -41,14 +43,19 @@ u32 get_cpu_rev(void) if (type != MXC_CPU_MX6SL) { reg = readl(&anatop->digprog); + struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR; + u32 cfg = readl(&scu->config) & 3; type = ((reg >> 16) & 0xff); if (type == MXC_CPU_MX6DL) { - struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR; - u32 cfg = readl(&scu->config) & 3; - if (!cfg) type = MXC_CPU_MX6SOLO; } + + if (type == MXC_CPU_MX6Q) { + if (cfg == 1) + type = MXC_CPU_MX6D; + } + } reg &= 0xff; /* mx6 silicon revision */ return (type << 12) | (reg + 0x10); @@ -62,6 +69,9 @@ u32 __weak get_board_rev(void) if (type == MXC_CPU_MX6SOLO) cpurev = (MXC_CPU_MX6DL) << 12 | (cpurev & 0xFFF); + if (type == MXC_CPU_MX6D) + cpurev = (MXC_CPU_MX6Q) << 12 | (cpurev & 0xFFF); + return cpurev; } #endif @@ -177,10 +187,41 @@ static void imx_set_wdog_powerdown(bool enable) writew(enable, &wdog2->wmcr); } +static void set_ahb_rate(u32 val) +{ + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + u32 reg, div; + + div = get_periph_clk() / val - 1; + reg = readl(&mxc_ccm->cbcdr); + + writel((reg & (~MXC_CCM_CBCDR_AHB_PODF_MASK)) | + (div << MXC_CCM_CBCDR_AHB_PODF_OFFSET), &mxc_ccm->cbcdr); +} + +static void clear_mmdc_ch_mask(void) +{ + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + + /* Clear MMDC channel mask */ + writel(0, &mxc_ccm->ccdr); +} + int arch_cpu_init(void) { init_aips(); + /* Need to clear MMDC_CHx_MASK to make warm reset work. */ + clear_mmdc_ch_mask(); + + /* + * When low freq boot is enabled, ROM will not set AHB + * freq, so we need to ensure AHB freq is 132MHz in such + * scenario. + */ + if (mxc_get_clock(MXC_ARM_CLK) == 396000000) + set_ahb_rate(132000000); + imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */ #ifdef CONFIG_APBH_DMA @@ -336,3 +377,59 @@ void imx_setup_hdmi(void) writel(reg, &mxc_ccm->chsccdr); } #endif + +#ifndef CONFIG_SYS_L2CACHE_OFF +#define IOMUXC_GPR11_L2CACHE_AS_OCRAM 0x00000002 +void v7_outer_cache_enable(void) +{ + struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE; + unsigned int val; + +#if defined CONFIG_MX6SL + struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; + val = readl(&iomux->gpr[11]); + if (val & IOMUXC_GPR11_L2CACHE_AS_OCRAM) { + /* L2 cache configured as OCRAM, reset it */ + val &= ~IOMUXC_GPR11_L2CACHE_AS_OCRAM; + writel(val, &iomux->gpr[11]); + } +#endif + + writel(0x132, &pl310->pl310_tag_latency_ctrl); + writel(0x132, &pl310->pl310_data_latency_ctrl); + + val = readl(&pl310->pl310_prefetch_ctrl); + + /* Turn on the L2 I/D prefetch */ + val |= 0x30000000; + + /* + * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0 + * The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2 + * But according to ARM PL310 errata: 752271 + * ID: 752271: Double linefill feature can cause data corruption + * Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2 + * Workaround: The only workaround to this erratum is to disable the + * double linefill feature. This is the default behavior. + */ + +#ifndef CONFIG_MX6Q + val |= 0x40800000; +#endif + writel(val, &pl310->pl310_prefetch_ctrl); + + val = readl(&pl310->pl310_power_ctrl); + val |= L2X0_DYNAMIC_CLK_GATING_EN; + val |= L2X0_STNDBY_MODE_EN; + writel(val, &pl310->pl310_power_ctrl); + + setbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN); +} + +void v7_outer_cache_disable(void) +{ + struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE; + + clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN); +} +#endif /* !CONFIG_SYS_L2CACHE_OFF */ diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c index 69fff32..52e0f4a 100644 --- a/arch/arm/cpu/armv7/omap-common/boot-common.c +++ b/arch/arm/cpu/armv7/omap-common/boot-common.c @@ -66,7 +66,18 @@ u32 spl_boot_device(void) u32 spl_boot_mode(void) { - return gd->arch.omap_boot_params.omap_bootmode; + u32 val = gd->arch.omap_boot_params.omap_bootmode; + + if (val == MMCSD_MODE_RAW) + return MMCSD_MODE_RAW; + else if (val == MMCSD_MODE_FAT) + return MMCSD_MODE_FAT; + else +#ifdef CONFIG_SUPPORT_EMMC_BOOT + return MMCSD_MODE_EMMCBOOT; +#else + return MMCSD_MODE_UNDEFINED; +#endif } void spl_board_init(void) diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c index dfa3760..8e7411d 100644 --- a/arch/arm/cpu/armv7/omap-common/clocks-common.c +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c @@ -418,55 +418,6 @@ static void setup_dplls(void) #endif } -#ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL -static void setup_non_essential_dplls(void) -{ - u32 abe_ref_clk; - const struct dpll_params *params; - - /* IVA */ - clrsetbits_le32((*prcm)->cm_bypclk_dpll_iva, - CM_BYPCLK_DPLL_IVA_CLKSEL_MASK, DPLL_IVA_CLKSEL_CORE_X2_DIV_2); - - params = get_iva_dpll_params(*dplls_data); - do_setup_dpll((*prcm)->cm_clkmode_dpll_iva, params, DPLL_LOCK, "iva"); - - /* Configure ABE dpll */ - params = get_abe_dpll_params(*dplls_data); -#ifdef CONFIG_SYS_OMAP_ABE_SYSCK - abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK; - - if (omap_revision() == DRA752_ES1_0) - /* Select the sys clk for dpll_abe */ - clrsetbits_le32((*prcm)->cm_abe_pll_sys_clksel, - CM_CLKSEL_ABE_PLL_SYS_CLKSEL_MASK, - CM_ABE_PLL_SYS_CLKSEL_SYSCLK2); -#else - abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK; - /* - * We need to enable some additional options to achieve - * 196.608MHz from 32768 Hz - */ - setbits_le32((*prcm)->cm_clkmode_dpll_abe, - CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK| - CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK| - CM_CLKMODE_DPLL_LPMODE_EN_MASK| - CM_CLKMODE_DPLL_REGM4XEN_MASK); - /* Spend 4 REFCLK cycles at each stage */ - clrsetbits_le32((*prcm)->cm_clkmode_dpll_abe, - CM_CLKMODE_DPLL_RAMP_RATE_MASK, - 1 << CM_CLKMODE_DPLL_RAMP_RATE_SHIFT); -#endif - - /* Select the right reference clk */ - clrsetbits_le32((*prcm)->cm_abe_pll_ref_clksel, - CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK, - abe_ref_clk << CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT); - /* Lock the dpll */ - do_setup_dpll((*prcm)->cm_clkmode_dpll_abe, params, DPLL_LOCK, "abe"); -} -#endif - u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic) { u32 offset_code; @@ -760,10 +711,6 @@ void prcm_init(void) timer_init(); scale_vcores(*omap_vcores); setup_dplls(); -#ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL - setup_non_essential_dplls(); - enable_non_essential_clocks(); -#endif setup_warmreset_time(); break; default: diff --git a/arch/arm/cpu/armv7/omap-common/config.mk b/arch/arm/cpu/armv7/omap-common/config.mk deleted file mode 100644 index 3a36ab6..0000000 --- a/arch/arm/cpu/armv7/omap-common/config.mk +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# Make ARMv5 to allow more compilers to work, even though its v7a. -PLATFORM_CPPFLAGS += -march=armv5 diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c index cd6289b..429c4be 100644 --- a/arch/arm/cpu/armv7/omap-common/emif-common.c +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -179,8 +179,7 @@ void emif_update_timings(u32 base, const struct emif_regs *regs) writel(regs->temp_alert_config, &emif->emif_temp_alert_config); writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw); - if ((omap_revision() >= OMAP5430_ES1_0) || - (omap_revision() == DRA752_ES1_0)) { + if ((omap_revision() >= OMAP5430_ES1_0) || is_dra7xx()) { writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0, &emif->emif_l3_config); } else if (omap_revision() >= OMAP4460_ES1_0) { @@ -309,7 +308,7 @@ static void ddr3_init(u32 base, const struct emif_regs *regs) * The same sequence should work on OMAP5432 as well. But strange that * it is not working */ - if (omap_revision() == DRA752_ES1_0) { + if (is_dra7xx()) { do_ext_phy_settings(base, regs); writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config); writel(regs->sdram_config_init, &emif->emif_sdram_config); diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c index 85d3754..ade744e 100644 --- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c +++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c @@ -43,16 +43,10 @@ static void set_mux_conf_regs(void) set_muxconf_regs_essential(); break; case OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL: -#ifdef CONFIG_SYS_ENABLE_PADS_ALL - set_muxconf_regs_non_essential(); -#endif break; case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR: case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH: set_muxconf_regs_essential(); -#ifdef CONFIG_SYS_ENABLE_PADS_ALL - set_muxconf_regs_non_essential(); -#endif break; } } @@ -254,6 +248,7 @@ u32 get_device_type(void) (DEVICE_TYPE_MASK)) >> DEVICE_TYPE_SHIFT; } +#if defined(CONFIG_DISPLAY_CPUINFO) /* * Print CPU information */ @@ -264,6 +259,8 @@ int print_cpuinfo(void) return 0; } +#endif + #ifndef CONFIG_SYS_DCACHE_OFF void enable_caches(void) { diff --git a/arch/arm/cpu/armv7/omap-common/sata.c b/arch/arm/cpu/armv7/omap-common/sata.c index f5468c4..cad4fee 100644 --- a/arch/arm/cpu/armv7/omap-common/sata.c +++ b/arch/arm/cpu/armv7/omap-common/sata.c @@ -12,6 +12,7 @@ #include <scsi.h> #include <asm/arch/clock.h> #include <asm/arch/sata.h> +#include <sata.h> #include <asm/io.h> #include "pipe3-phy.h" @@ -31,7 +32,7 @@ struct omap_pipe3 sata_phy = { .dpll_map = dpll_map_sata, }; -int omap_sata_init(void) +int init_sata(int dev) { int ret; u32 val; diff --git a/arch/arm/cpu/armv7/omap3/config.mk b/arch/arm/cpu/armv7/omap3/config.mk index 1d6a57c..ad44d63 100644 --- a/arch/arm/cpu/armv7/omap3/config.mk +++ b/arch/arm/cpu/armv7/omap3/config.mk @@ -9,7 +9,7 @@ # SPDX-License-Identifier: GPL-2.0+ # ifdef CONFIG_SPL_BUILD -ALL-y += $(OBJTREE)/MLO +ALL-y += MLO else -ALL-y += $(obj)u-boot.img +ALL-y += u-boot.img endif diff --git a/arch/arm/cpu/armv7/omap4/config.mk b/arch/arm/cpu/armv7/omap4/config.mk index 1d6a57c..ad44d63 100644 --- a/arch/arm/cpu/armv7/omap4/config.mk +++ b/arch/arm/cpu/armv7/omap4/config.mk @@ -9,7 +9,7 @@ # SPDX-License-Identifier: GPL-2.0+ # ifdef CONFIG_SPL_BUILD -ALL-y += $(OBJTREE)/MLO +ALL-y += MLO else -ALL-y += $(obj)u-boot.img +ALL-y += u-boot.img endif diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c index 1b2f439..4dec73e 100644 --- a/arch/arm/cpu/armv7/omap4/hw_data.c +++ b/arch/arm/cpu/armv7/omap4/hw_data.c @@ -399,91 +399,6 @@ void enable_basic_uboot_clocks(void) 1); } -/* - * Enable non-essential clock domains, modules and - * do some additional special settings needed - */ -void enable_non_essential_clocks(void) -{ - u32 const clk_domains_non_essential[] = { - (*prcm)->cm_mpu_m3_clkstctrl, - (*prcm)->cm_ivahd_clkstctrl, - (*prcm)->cm_dsp_clkstctrl, - (*prcm)->cm_dss_clkstctrl, - (*prcm)->cm_sgx_clkstctrl, - (*prcm)->cm1_abe_clkstctrl, - (*prcm)->cm_c2c_clkstctrl, - (*prcm)->cm_cam_clkstctrl, - (*prcm)->cm_dss_clkstctrl, - (*prcm)->cm_sdma_clkstctrl, - 0 - }; - - u32 const clk_modules_hw_auto_non_essential[] = { - (*prcm)->cm_l3instr_l3_3_clkctrl, - (*prcm)->cm_l3instr_l3_instr_clkctrl, - (*prcm)->cm_l3instr_intrconn_wp1_clkctrl, - (*prcm)->cm_l3init_hsi_clkctrl, - 0 - }; - - u32 const clk_modules_explicit_en_non_essential[] = { - (*prcm)->cm1_abe_aess_clkctrl, - (*prcm)->cm1_abe_pdm_clkctrl, - (*prcm)->cm1_abe_dmic_clkctrl, - (*prcm)->cm1_abe_mcasp_clkctrl, - (*prcm)->cm1_abe_mcbsp1_clkctrl, - (*prcm)->cm1_abe_mcbsp2_clkctrl, - (*prcm)->cm1_abe_mcbsp3_clkctrl, - (*prcm)->cm1_abe_slimbus_clkctrl, - (*prcm)->cm1_abe_timer5_clkctrl, - (*prcm)->cm1_abe_timer6_clkctrl, - (*prcm)->cm1_abe_timer7_clkctrl, - (*prcm)->cm1_abe_timer8_clkctrl, - (*prcm)->cm1_abe_wdt3_clkctrl, - (*prcm)->cm_l4per_gptimer9_clkctrl, - (*prcm)->cm_l4per_gptimer10_clkctrl, - (*prcm)->cm_l4per_gptimer11_clkctrl, - (*prcm)->cm_l4per_gptimer3_clkctrl, - (*prcm)->cm_l4per_gptimer4_clkctrl, - (*prcm)->cm_l4per_hdq1w_clkctrl, - (*prcm)->cm_l4per_mcbsp4_clkctrl, - (*prcm)->cm_l4per_mcspi2_clkctrl, - (*prcm)->cm_l4per_mcspi3_clkctrl, - (*prcm)->cm_l4per_mcspi4_clkctrl, - (*prcm)->cm_l4per_mmcsd3_clkctrl, - (*prcm)->cm_l4per_mmcsd4_clkctrl, - (*prcm)->cm_l4per_mmcsd5_clkctrl, - (*prcm)->cm_l4per_uart1_clkctrl, - (*prcm)->cm_l4per_uart2_clkctrl, - (*prcm)->cm_l4per_uart4_clkctrl, - (*prcm)->cm_wkup_keyboard_clkctrl, - (*prcm)->cm_wkup_wdtimer2_clkctrl, - (*prcm)->cm_cam_iss_clkctrl, - (*prcm)->cm_cam_fdif_clkctrl, - (*prcm)->cm_dss_dss_clkctrl, - (*prcm)->cm_sgx_sgx_clkctrl, - 0 - }; - - /* Enable optional functional clock for ISS */ - setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK); - - /* Enable all optional functional clocks of DSS */ - setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK); - - do_enable_clocks(clk_domains_non_essential, - clk_modules_hw_auto_non_essential, - clk_modules_explicit_en_non_essential, - 0); - - /* Put camera module in no sleep mode */ - clrsetbits_le32((*prcm)->cm_cam_clkstctrl, - MODULE_CLKCTRL_MODULEMODE_MASK, - CD_CLKCTRL_CLKTRCTRL_NO_SLEEP << - MODULE_CLKCTRL_MODULEMODE_SHIFT); -} - void hw_data_init(void) { u32 omap_rev = omap_revision(); diff --git a/arch/arm/cpu/armv7/omap5/abb.c b/arch/arm/cpu/armv7/omap5/abb.c index 31b6795..3bf8897 100644 --- a/arch/arm/cpu/armv7/omap5/abb.c +++ b/arch/arm/cpu/armv7/omap5/abb.c @@ -28,18 +28,25 @@ s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb) { u32 vset; + u32 fuse_enable_mask = OMAP5_ABB_FUSE_ENABLE_MASK; + u32 fuse_vset_mask = OMAP5_ABB_FUSE_VSET_MASK; + if (!is_omap54xx()) { + /* DRA7 */ + fuse_enable_mask = DRA7_ABB_FUSE_ENABLE_MASK; + fuse_vset_mask = DRA7_ABB_FUSE_VSET_MASK; + } /* * ABB parameters must be properly fused * otherwise ABB should be disabled */ vset = readl(fuse); - if (!(vset & OMAP5_ABB_FUSE_ENABLE_MASK)) + if (!(vset & fuse_enable_mask)) return -1; /* prepare VSET value for LDOVBB mux register */ - vset &= OMAP5_ABB_FUSE_VSET_MASK; - vset >>= ffs(OMAP5_ABB_FUSE_VSET_MASK) - 1; + vset &= fuse_vset_mask; + vset >>= ffs(fuse_vset_mask) - 1; vset <<= ffs(OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK) - 1; vset |= OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK; diff --git a/arch/arm/cpu/armv7/omap5/config.mk b/arch/arm/cpu/armv7/omap5/config.mk index 2673af9..ef2725a 100644 --- a/arch/arm/cpu/armv7/omap5/config.mk +++ b/arch/arm/cpu/armv7/omap5/config.mk @@ -7,7 +7,7 @@ # ifdef CONFIG_SPL_BUILD -ALL-y += $(OBJTREE)/MLO +ALL-y += MLO else -ALL-y += $(obj)u-boot.img +ALL-y += u-boot.img endif diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c index 5268a1f..ad97132 100644 --- a/arch/arm/cpu/armv7/omap5/hw_data.c +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -486,94 +486,6 @@ void enable_basic_uboot_clocks(void) 1); } -/* - * Enable non-essential clock domains, modules and - * do some additional special settings needed - */ -void enable_non_essential_clocks(void) -{ - u32 const clk_domains_non_essential[] = { - (*prcm)->cm_mpu_m3_clkstctrl, - (*prcm)->cm_ivahd_clkstctrl, - (*prcm)->cm_dsp_clkstctrl, - (*prcm)->cm_dss_clkstctrl, - (*prcm)->cm_sgx_clkstctrl, - (*prcm)->cm1_abe_clkstctrl, - (*prcm)->cm_c2c_clkstctrl, - (*prcm)->cm_cam_clkstctrl, - (*prcm)->cm_dss_clkstctrl, - (*prcm)->cm_sdma_clkstctrl, - 0 - }; - - u32 const clk_modules_hw_auto_non_essential[] = { - (*prcm)->cm_mpu_m3_mpu_m3_clkctrl, - (*prcm)->cm_ivahd_ivahd_clkctrl, - (*prcm)->cm_ivahd_sl2_clkctrl, - (*prcm)->cm_dsp_dsp_clkctrl, - (*prcm)->cm_l3instr_l3_3_clkctrl, - (*prcm)->cm_l3instr_l3_instr_clkctrl, - (*prcm)->cm_l3instr_intrconn_wp1_clkctrl, - (*prcm)->cm_l3init_hsi_clkctrl, - (*prcm)->cm_l4per_hdq1w_clkctrl, - 0 - }; - - u32 const clk_modules_explicit_en_non_essential[] = { - (*prcm)->cm1_abe_aess_clkctrl, - (*prcm)->cm1_abe_pdm_clkctrl, - (*prcm)->cm1_abe_dmic_clkctrl, - (*prcm)->cm1_abe_mcasp_clkctrl, - (*prcm)->cm1_abe_mcbsp1_clkctrl, - (*prcm)->cm1_abe_mcbsp2_clkctrl, - (*prcm)->cm1_abe_mcbsp3_clkctrl, - (*prcm)->cm1_abe_slimbus_clkctrl, - (*prcm)->cm1_abe_timer5_clkctrl, - (*prcm)->cm1_abe_timer6_clkctrl, - (*prcm)->cm1_abe_timer7_clkctrl, - (*prcm)->cm1_abe_timer8_clkctrl, - (*prcm)->cm1_abe_wdt3_clkctrl, - (*prcm)->cm_l4per_gptimer9_clkctrl, - (*prcm)->cm_l4per_gptimer10_clkctrl, - (*prcm)->cm_l4per_gptimer11_clkctrl, - (*prcm)->cm_l4per_gptimer3_clkctrl, - (*prcm)->cm_l4per_gptimer4_clkctrl, - (*prcm)->cm_l4per_mcspi2_clkctrl, - (*prcm)->cm_l4per_mcspi3_clkctrl, - (*prcm)->cm_l4per_mcspi4_clkctrl, - (*prcm)->cm_l4per_mmcsd3_clkctrl, - (*prcm)->cm_l4per_mmcsd4_clkctrl, - (*prcm)->cm_l4per_mmcsd5_clkctrl, - (*prcm)->cm_l4per_uart1_clkctrl, - (*prcm)->cm_l4per_uart2_clkctrl, - (*prcm)->cm_l4per_uart4_clkctrl, - (*prcm)->cm_wkup_keyboard_clkctrl, - (*prcm)->cm_wkup_wdtimer2_clkctrl, - (*prcm)->cm_cam_iss_clkctrl, - (*prcm)->cm_cam_fdif_clkctrl, - (*prcm)->cm_dss_dss_clkctrl, - (*prcm)->cm_sgx_sgx_clkctrl, - 0 - }; - - /* Enable optional functional clock for ISS */ - setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK); - - /* Enable all optional functional clocks of DSS */ - setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK); - - do_enable_clocks(clk_domains_non_essential, - clk_modules_hw_auto_non_essential, - clk_modules_explicit_en_non_essential, - 0); - - /* Put camera module in no sleep mode */ - clrsetbits_le32((*prcm)->cm_cam_clkstctrl, - MODULE_CLKCTRL_MODULEMODE_MASK, - CD_CLKCTRL_CLKTRCTRL_NO_SLEEP << - MODULE_CLKCTRL_MODULEMODE_SHIFT); -} - const struct ctrl_ioregs ioregs_omap5430 = { .ctrl_ddrch = DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, .ctrl_lpddr2ch = DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN, @@ -639,6 +551,7 @@ void hw_data_init(void) break; case DRA752_ES1_0: + case DRA752_ES1_1: *prcm = &dra7xx_prcm; *dplls_data = &dra7xx_dplls; *omap_vcores = &dra752_volts; @@ -666,6 +579,7 @@ void get_ioregs(const struct ctrl_ioregs **regs) *regs = &ioregs_omap5432_es2; break; case DRA752_ES1_0: + case DRA752_ES1_1: *regs = &ioregs_dra7xx_es1; break; diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c index 5386ae0..737d23c 100644 --- a/arch/arm/cpu/armv7/omap5/hwinit.c +++ b/arch/arm/cpu/armv7/omap5/hwinit.c @@ -333,6 +333,9 @@ void init_omap_revision(void) case DRA752_CONTROL_ID_CODE_ES1_0: *omap_si_rev = DRA752_ES1_0; break; + case DRA752_CONTROL_ID_CODE_ES1_1: + *omap_si_rev = DRA752_ES1_1; + break; default: *omap_si_rev = OMAP5430_SILICON_ID_INVALID; } diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c index 77c428b..ff32807 100644 --- a/arch/arm/cpu/armv7/omap5/prcm-regs.c +++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c @@ -432,11 +432,13 @@ struct omap_sys_ctrl_regs const dra7xx_ctrl = { .control_srcomp_code_latch = 0x4A002E84, .control_ddr_control_ext_0 = 0x4A002E88, .control_padconf_core_base = 0x4A003400, + .control_std_fuse_opp_vdd_mpu_2 = 0x4A003B24, .control_port_emif1_sdram_config = 0x4AE0C110, .control_port_emif1_lpddr2_nvm_config = 0x4AE0C114, .control_port_emif2_sdram_config = 0x4AE0C118, .control_emif1_sdram_config_ext = 0x4AE0C144, .control_emif2_sdram_config_ext = 0x4AE0C148, + .control_wkup_ldovbb_mpu_voltage_ctrl = 0x4AE0C158, .control_padconf_mode = 0x4AE0C5A0, .control_xtal_oscillator = 0x4AE0C5A4, .control_i2c_2 = 0x4AE0C5A8, @@ -807,6 +809,9 @@ struct prcm_regs const dra7xx_prcm = { .cm_dsp_clkstctrl = 0x4a005400, .cm_dsp_dsp_clkctrl = 0x4a005420, + /* prm irqstatus regs */ + .prm_irqstatus_mpu_2 = 0x4ae06014, + /* cm2.ckgen */ .cm_clksel_usb_60mhz = 0x4a008104, .cm_clkmode_dpll_per = 0x4a008140, @@ -967,4 +972,7 @@ struct prcm_regs const dra7xx_prcm = { .prm_vc_val_bypass = 0x4ae07da0, .prm_vc_cfg_i2c_mode = 0x4ae07db4, .prm_vc_cfg_i2c_clk = 0x4ae07db8, + + .prm_abbldo_mpu_setup = 0x4AE07DDC, + .prm_abbldo_mpu_ctrl = 0x4AE07DE0, }; diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c index 2e18706..16a91f9 100644 --- a/arch/arm/cpu/armv7/omap5/sdram.c +++ b/arch/arm/cpu/armv7/omap5/sdram.c @@ -245,6 +245,7 @@ static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs) *regs = &emif_regs_ddr3_532_mhz_1cs_es2; break; case DRA752_ES1_0: + case DRA752_ES1_1: switch (emif_nr) { case 1: *regs = &emif_1_regs_ddr3_532_mhz_1cs_dra_es1; @@ -273,6 +274,7 @@ static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs *dmm_lisa_regs = &lisa_map_4G_x_2_x_2; break; case DRA752_ES1_0: + case DRA752_ES1_1: default: *dmm_lisa_regs = &lisa_map_2G_x_2_x_2_2G_x_1_x_2; } @@ -460,6 +462,7 @@ static void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, *size = ARRAY_SIZE(ddr3_ext_phy_ctrl_const_base_es2); break; case DRA752_ES1_0: + case DRA752_ES1_1: if (emif_nr == 1) { *regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif1; *size = @@ -626,6 +629,7 @@ const struct read_write_regs *get_bug_regs(u32 *iterations) sizeof(omap5_bug_00339_regs[0]); break; case DRA752_ES1_0: + case DRA752_ES1_1: bug_00339_regs_ptr = dra_bug_00339_regs; *iterations = sizeof(dra_bug_00339_regs)/ sizeof(dra_bug_00339_regs[0]); diff --git a/arch/arm/cpu/armv7/socfpga/config.mk b/arch/arm/cpu/armv7/socfpga/config.mk index d33ab7d..3d18491 100644 --- a/arch/arm/cpu/armv7/socfpga/config.mk +++ b/arch/arm/cpu/armv7/socfpga/config.mk @@ -4,5 +4,5 @@ # SPDX-License-Identifier: GPL-2.0+ # ifndef CONFIG_SPL_BUILD -ALL-y += $(obj)u-boot.img +ALL-y += u-boot.img endif diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 6c9b11a..5aac773 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -38,12 +38,19 @@ _irq: .word _irq _fiq: .word _fiq _pad: .word 0x12345678 /* now 16*4=64 */ #else +.globl _undefined_instruction _undefined_instruction: .word undefined_instruction +.globl _software_interrupt _software_interrupt: .word software_interrupt +.globl _prefetch_abort _prefetch_abort: .word prefetch_abort +.globl _data_abort _data_abort: .word data_abort +.globl _not_used _not_used: .word not_used +.globl _irq _irq: .word irq +.globl _fiq _fiq: .word fiq _pad: .word 0x12345678 /* now 16*4=64 */ #endif /* CONFIG_SPL_BUILD */ diff --git a/arch/arm/cpu/armv7/tegra114/Makefile b/arch/arm/cpu/armv7/tegra114/Makefile index 886b509..77e2319 100644 --- a/arch/arm/cpu/armv7/tegra114/Makefile +++ b/arch/arm/cpu/armv7/tegra114/Makefile @@ -17,4 +17,5 @@ # along with this program. If not, see <http://www.gnu.org/licenses/>. # -obj- := +# necessary to create built-in.o +obj- := __dummy__.o diff --git a/arch/arm/cpu/armv7/tegra124/Makefile b/arch/arm/cpu/armv7/tegra124/Makefile new file mode 100644 index 0000000..9478d44 --- /dev/null +++ b/arch/arm/cpu/armv7/tegra124/Makefile @@ -0,0 +1,9 @@ +# +# (C) Copyright 2013-2014 +# NVIDIA Corporation <www.nvidia.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +# necessary to create built-in.o +obj- := __dummy__.o diff --git a/arch/arm/cpu/armv7/tegra30/Makefile b/arch/arm/cpu/armv7/tegra30/Makefile index 518d6d1..413eba1 100644 --- a/arch/arm/cpu/armv7/tegra30/Makefile +++ b/arch/arm/cpu/armv7/tegra30/Makefile @@ -17,4 +17,5 @@ # along with this program. If not, see <http://www.gnu.org/licenses/>. # -obj- := +# necessary to create built-in.o +obj- := __dummy__.o diff --git a/arch/arm/cpu/armv7/zynq/Makefile b/arch/arm/cpu/armv7/zynq/Makefile index d382d49..3363a3c 100644 --- a/arch/arm/cpu/armv7/zynq/Makefile +++ b/arch/arm/cpu/armv7/zynq/Makefile @@ -12,3 +12,5 @@ obj-y := timer.o obj-y += cpu.o obj-y += ddrc.o obj-y += slcr.o +obj-y += clk.o +obj-$(CONFIG_SPL_BUILD) += spl.o diff --git a/arch/arm/cpu/armv7/zynq/clk.c b/arch/arm/cpu/armv7/zynq/clk.c new file mode 100644 index 0000000..d2885dc --- /dev/null +++ b/arch/arm/cpu/armv7/zynq/clk.c @@ -0,0 +1,664 @@ +/* + * Copyright (C) 2013 Soren Brinkmann <soren.brinkmann@xilinx.com> + * Copyright (C) 2013 Xilinx, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <errno.h> +#include <clk.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/clk.h> + +/* Board oscillator frequency */ +#ifndef CONFIG_ZYNQ_PS_CLK_FREQ +# define CONFIG_ZYNQ_PS_CLK_FREQ 33333333UL +#endif + +/* Register bitfield defines */ +#define PLLCTRL_FBDIV_MASK 0x7f000 +#define PLLCTRL_FBDIV_SHIFT 12 +#define PLLCTRL_BPFORCE_MASK (1 << 4) +#define PLLCTRL_PWRDWN_MASK 2 +#define PLLCTRL_PWRDWN_SHIFT 1 +#define PLLCTRL_RESET_MASK 1 +#define PLLCTRL_RESET_SHIFT 0 + +#define ZYNQ_CLK_MAXDIV 0x3f +#define CLK_CTRL_DIV1_SHIFT 20 +#define CLK_CTRL_DIV1_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV1_SHIFT) +#define CLK_CTRL_DIV0_SHIFT 8 +#define CLK_CTRL_DIV0_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV0_SHIFT) +#define CLK_CTRL_SRCSEL_SHIFT 4 +#define CLK_CTRL_SRCSEL_MASK (0x3 << CLK_CTRL_SRCSEL_SHIFT) + +#define CLK_CTRL_DIV2X_SHIFT 26 +#define CLK_CTRL_DIV2X_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV2X_SHIFT) +#define CLK_CTRL_DIV3X_SHIFT 20 +#define CLK_CTRL_DIV3X_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV3X_SHIFT) + +#define ZYNQ_CLKMUX_SEL_0 0 +#define ZYNQ_CLKMUX_SEL_1 1 +#define ZYNQ_CLKMUX_SEL_2 2 +#define ZYNQ_CLKMUX_SEL_3 3 + +DECLARE_GLOBAL_DATA_PTR; + +struct clk; + +/** + * struct clk_ops: + * @set_rate: Function pointer to set_rate() implementation + * @get_rate: Function pointer to get_rate() implementation + */ +struct clk_ops { + int (*set_rate)(struct clk *clk, unsigned long rate); + unsigned long (*get_rate)(struct clk *clk); +}; + +/** + * struct clk: + * @name: Clock name + * @frequency: Currenct frequency + * @parent: Parent clock + * @flags: Clock flags + * @reg: Clock control register + * @ops: Clock operations + */ +struct clk { + char *name; + unsigned long frequency; + enum zynq_clk parent; + unsigned int flags; + u32 *reg; + struct clk_ops ops; +}; +#define ZYNQ_CLK_FLAGS_HAS_2_DIVS 1 + +static struct clk clks[clk_max]; + +/** + * __zynq_clk_cpu_get_parent() - Decode clock multiplexer + * @srcsel: Mux select value + * Returns the clock identifier associated with the selected mux input. + */ +static int __zynq_clk_cpu_get_parent(unsigned int srcsel) +{ + unsigned int ret; + + switch (srcsel) { + case ZYNQ_CLKMUX_SEL_0: + case ZYNQ_CLKMUX_SEL_1: + ret = armpll_clk; + break; + case ZYNQ_CLKMUX_SEL_2: + ret = ddrpll_clk; + break; + case ZYNQ_CLKMUX_SEL_3: + ret = iopll_clk; + break; + default: + ret = armpll_clk; + break; + } + + return ret; +} + +/** + * ddr2x_get_rate() - Get clock rate of DDR2x clock + * @clk: Clock handle + * Returns the current clock rate of @clk. + */ +static unsigned long ddr2x_get_rate(struct clk *clk) +{ + u32 clk_ctrl = readl(clk->reg); + u32 div = (clk_ctrl & CLK_CTRL_DIV2X_MASK) >> CLK_CTRL_DIV2X_SHIFT; + + return DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div); +} + +/** + * ddr3x_get_rate() - Get clock rate of DDR3x clock + * @clk: Clock handle + * Returns the current clock rate of @clk. + */ +static unsigned long ddr3x_get_rate(struct clk *clk) +{ + u32 clk_ctrl = readl(clk->reg); + u32 div = (clk_ctrl & CLK_CTRL_DIV3X_MASK) >> CLK_CTRL_DIV3X_SHIFT; + + return DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div); +} + +static void init_ddr_clocks(void) +{ + u32 div0, div1; + unsigned long prate = zynq_clk_get_rate(ddrpll_clk); + u32 clk_ctrl = readl(&slcr_base->ddr_clk_ctrl); + + /* DDR2x */ + clks[ddr2x_clk].reg = &slcr_base->ddr_clk_ctrl; + clks[ddr2x_clk].parent = ddrpll_clk; + clks[ddr2x_clk].name = "ddr_2x"; + clks[ddr2x_clk].frequency = ddr2x_get_rate(&clks[ddr2x_clk]); + clks[ddr2x_clk].ops.get_rate = ddr2x_get_rate; + + /* DDR3x */ + clks[ddr3x_clk].reg = &slcr_base->ddr_clk_ctrl; + clks[ddr3x_clk].parent = ddrpll_clk; + clks[ddr3x_clk].name = "ddr_3x"; + clks[ddr3x_clk].frequency = ddr3x_get_rate(&clks[ddr3x_clk]); + clks[ddr3x_clk].ops.get_rate = ddr3x_get_rate; + + /* DCI */ + clk_ctrl = readl(&slcr_base->dci_clk_ctrl); + div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT; + div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT; + clks[dci_clk].reg = &slcr_base->dci_clk_ctrl; + clks[dci_clk].parent = ddrpll_clk; + clks[dci_clk].frequency = DIV_ROUND_CLOSEST( + DIV_ROUND_CLOSEST(prate, div0), div1); + clks[dci_clk].name = "dci"; + + gd->bd->bi_ddr_freq = clks[ddr3x_clk].frequency / 1000000; +} + +static void init_cpu_clocks(void) +{ + int clk_621; + u32 reg, div, srcsel; + enum zynq_clk parent; + + reg = readl(&slcr_base->arm_clk_ctrl); + clk_621 = readl(&slcr_base->clk_621_true) & 1; + div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT; + srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT; + parent = __zynq_clk_cpu_get_parent(srcsel); + + /* cpu clocks */ + clks[cpu_6or4x_clk].reg = &slcr_base->arm_clk_ctrl; + clks[cpu_6or4x_clk].parent = parent; + clks[cpu_6or4x_clk].frequency = DIV_ROUND_CLOSEST( + zynq_clk_get_rate(parent), div); + clks[cpu_6or4x_clk].name = "cpu_6or4x"; + + clks[cpu_3or2x_clk].reg = &slcr_base->arm_clk_ctrl; + clks[cpu_3or2x_clk].parent = cpu_6or4x_clk; + clks[cpu_3or2x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) / 2; + clks[cpu_3or2x_clk].name = "cpu_3or2x"; + + clks[cpu_2x_clk].reg = &slcr_base->arm_clk_ctrl; + clks[cpu_2x_clk].parent = cpu_6or4x_clk; + clks[cpu_2x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) / + (2 + clk_621); + clks[cpu_2x_clk].name = "cpu_2x"; + + clks[cpu_1x_clk].reg = &slcr_base->arm_clk_ctrl; + clks[cpu_1x_clk].parent = cpu_6or4x_clk; + clks[cpu_1x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) / + (4 + 2 * clk_621); + clks[cpu_1x_clk].name = "cpu_1x"; +} + +/** + * periph_calc_two_divs() - Calculate clock dividers + * @cur_rate: Current clock rate + * @tgt_rate: Target clock rate + * @prate: Parent clock rate + * @div0: First divider (output) + * @div1: Second divider (output) + * Returns the actual clock rate possible. + * + * Calculates clock dividers for clocks with two 6-bit dividers. + */ +static unsigned long periph_calc_two_divs(unsigned long cur_rate, + unsigned long tgt_rate, unsigned long prate, u32 *div0, + u32 *div1) +{ + long err, best_err = (long)(~0UL >> 1); + unsigned long rate, best_rate = 0; + u32 d0, d1; + + for (d0 = 1; d0 <= ZYNQ_CLK_MAXDIV; d0++) { + for (d1 = 1; d1 <= ZYNQ_CLK_MAXDIV >> 1; d1++) { + rate = DIV_ROUND_CLOSEST(DIV_ROUND_CLOSEST(prate, d0), + d1); + err = abs(rate - tgt_rate); + + if (err < best_err) { + *div0 = d0; + *div1 = d1; + best_err = err; + best_rate = rate; + } + } + } + + return best_rate; +} + +/** + * zynq_clk_periph_set_rate() - Set clock rate + * @clk: Handle of the peripheral clock + * @rate: New clock rate + * Sets the clock frequency of @clk to @rate. Returns zero on success. + */ +static int zynq_clk_periph_set_rate(struct clk *clk, + unsigned long rate) +{ + u32 ctrl, div0 = 0, div1 = 0; + unsigned long prate, new_rate, cur_rate = clk->frequency; + + ctrl = readl(clk->reg); + prate = zynq_clk_get_rate(clk->parent); + ctrl &= ~CLK_CTRL_DIV0_MASK; + + if (clk->flags & ZYNQ_CLK_FLAGS_HAS_2_DIVS) { + ctrl &= ~CLK_CTRL_DIV1_MASK; + new_rate = periph_calc_two_divs(cur_rate, rate, prate, &div0, + &div1); + ctrl |= div1 << CLK_CTRL_DIV1_SHIFT; + } else { + div0 = DIV_ROUND_CLOSEST(prate, rate); + div0 &= ZYNQ_CLK_MAXDIV; + new_rate = DIV_ROUND_CLOSEST(rate, div0); + } + + /* write new divs to hardware */ + ctrl |= div0 << CLK_CTRL_DIV0_SHIFT; + writel(ctrl, clk->reg); + + /* update frequency in clk framework */ + clk->frequency = new_rate; + + return 0; +} + +/** + * zynq_clk_periph_get_rate() - Get clock rate + * @clk: Handle of the peripheral clock + * Returns the current clock rate of @clk. + */ +static unsigned long zynq_clk_periph_get_rate(struct clk *clk) +{ + u32 clk_ctrl = readl(clk->reg); + u32 div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT; + u32 div1 = 1; + + if (clk->flags & ZYNQ_CLK_FLAGS_HAS_2_DIVS) + div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT; + + /* a register value of zero == division by 1 */ + if (!div0) + div0 = 1; + if (!div1) + div1 = 1; + + return + DIV_ROUND_CLOSEST( + DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div0), + div1); +} + +/** + * __zynq_clk_periph_get_parent() - Decode clock multiplexer + * @srcsel: Mux select value + * Returns the clock identifier associated with the selected mux input. + */ +static enum zynq_clk __zynq_clk_periph_get_parent(u32 srcsel) +{ + switch (srcsel) { + case ZYNQ_CLKMUX_SEL_0: + case ZYNQ_CLKMUX_SEL_1: + return iopll_clk; + case ZYNQ_CLKMUX_SEL_2: + return armpll_clk; + case ZYNQ_CLKMUX_SEL_3: + return ddrpll_clk; + default: + return 0; + } +} + +/** + * zynq_clk_periph_get_parent() - Decode clock multiplexer + * @clk: Clock handle + * Returns the clock identifier associated with the selected mux input. + */ +static enum zynq_clk zynq_clk_periph_get_parent(struct clk *clk) +{ + u32 clk_ctrl = readl(clk->reg); + u32 srcsel = (clk_ctrl & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT; + + return __zynq_clk_periph_get_parent(srcsel); +} + +/** + * zynq_clk_register_periph_clk() - Set up a peripheral clock with the framework + * @clk: Pointer to struct clk for the clock + * @ctrl: Clock control register + * @name: PLL name + * @two_divs: Indicates whether the clock features one or two dividers + */ +static int zynq_clk_register_periph_clk(struct clk *clk, u32 *ctrl, char *name, + bool two_divs) +{ + clk->name = name; + clk->reg = ctrl; + if (two_divs) + clk->flags = ZYNQ_CLK_FLAGS_HAS_2_DIVS; + clk->parent = zynq_clk_periph_get_parent(clk); + clk->frequency = zynq_clk_periph_get_rate(clk); + clk->ops.get_rate = zynq_clk_periph_get_rate; + clk->ops.set_rate = zynq_clk_periph_set_rate; + + return 0; +} + +static void init_periph_clocks(void) +{ + zynq_clk_register_periph_clk(&clks[gem0_clk], &slcr_base->gem0_clk_ctrl, + "gem0", 1); + zynq_clk_register_periph_clk(&clks[gem1_clk], &slcr_base->gem1_clk_ctrl, + "gem1", 1); + + zynq_clk_register_periph_clk(&clks[smc_clk], &slcr_base->smc_clk_ctrl, + "smc", 0); + + zynq_clk_register_periph_clk(&clks[lqspi_clk], + &slcr_base->lqspi_clk_ctrl, "lqspi", 0); + + zynq_clk_register_periph_clk(&clks[sdio0_clk], + &slcr_base->sdio_clk_ctrl, "sdio0", 0); + zynq_clk_register_periph_clk(&clks[sdio1_clk], + &slcr_base->sdio_clk_ctrl, "sdio1", 0); + + zynq_clk_register_periph_clk(&clks[spi0_clk], &slcr_base->spi_clk_ctrl, + "spi0", 0); + zynq_clk_register_periph_clk(&clks[spi1_clk], &slcr_base->spi_clk_ctrl, + "spi1", 0); + + zynq_clk_register_periph_clk(&clks[uart0_clk], + &slcr_base->uart_clk_ctrl, "uart0", 0); + zynq_clk_register_periph_clk(&clks[uart1_clk], + &slcr_base->uart_clk_ctrl, "uart1", 0); + + zynq_clk_register_periph_clk(&clks[dbg_trc_clk], + &slcr_base->dbg_clk_ctrl, "dbg_trc", 0); + zynq_clk_register_periph_clk(&clks[dbg_apb_clk], + &slcr_base->dbg_clk_ctrl, "dbg_apb", 0); + + zynq_clk_register_periph_clk(&clks[pcap_clk], + &slcr_base->pcap_clk_ctrl, "pcap", 0); + + zynq_clk_register_periph_clk(&clks[fclk0_clk], + &slcr_base->fpga0_clk_ctrl, "fclk0", 1); + zynq_clk_register_periph_clk(&clks[fclk1_clk], + &slcr_base->fpga1_clk_ctrl, "fclk1", 1); + zynq_clk_register_periph_clk(&clks[fclk2_clk], + &slcr_base->fpga2_clk_ctrl, "fclk2", 1); + zynq_clk_register_periph_clk(&clks[fclk3_clk], + &slcr_base->fpga3_clk_ctrl, "fclk3", 1); +} + +/** + * zynq_clk_register_aper_clk() - Set up a APER clock with the framework + * @clk: Pointer to struct clk for the clock + * @ctrl: Clock control register + * @name: PLL name + */ +static void zynq_clk_register_aper_clk(struct clk *clk, u32 *ctrl, char *name) +{ + clk->name = name; + clk->reg = ctrl; + clk->parent = cpu_1x_clk; + clk->frequency = zynq_clk_get_rate(clk->parent); +} + +static void init_aper_clocks(void) +{ + zynq_clk_register_aper_clk(&clks[usb0_aper_clk], + &slcr_base->aper_clk_ctrl, "usb0_aper"); + zynq_clk_register_aper_clk(&clks[usb1_aper_clk], + &slcr_base->aper_clk_ctrl, "usb1_aper"); + + zynq_clk_register_aper_clk(&clks[gem0_aper_clk], + &slcr_base->aper_clk_ctrl, "gem0_aper"); + zynq_clk_register_aper_clk(&clks[gem1_aper_clk], + &slcr_base->aper_clk_ctrl, "gem1_aper"); + + zynq_clk_register_aper_clk(&clks[sdio0_aper_clk], + &slcr_base->aper_clk_ctrl, "sdio0_aper"); + zynq_clk_register_aper_clk(&clks[sdio1_aper_clk], + &slcr_base->aper_clk_ctrl, "sdio1_aper"); + + zynq_clk_register_aper_clk(&clks[spi0_aper_clk], + &slcr_base->aper_clk_ctrl, "spi0_aper"); + zynq_clk_register_aper_clk(&clks[spi1_aper_clk], + &slcr_base->aper_clk_ctrl, "spi1_aper"); + + zynq_clk_register_aper_clk(&clks[can0_aper_clk], + &slcr_base->aper_clk_ctrl, "can0_aper"); + zynq_clk_register_aper_clk(&clks[can1_aper_clk], + &slcr_base->aper_clk_ctrl, "can1_aper"); + + zynq_clk_register_aper_clk(&clks[i2c0_aper_clk], + &slcr_base->aper_clk_ctrl, "i2c0_aper"); + zynq_clk_register_aper_clk(&clks[i2c1_aper_clk], + &slcr_base->aper_clk_ctrl, "i2c1_aper"); + + zynq_clk_register_aper_clk(&clks[uart0_aper_clk], + &slcr_base->aper_clk_ctrl, "uart0_aper"); + zynq_clk_register_aper_clk(&clks[uart1_aper_clk], + &slcr_base->aper_clk_ctrl, "uart1_aper"); + + zynq_clk_register_aper_clk(&clks[gpio_aper_clk], + &slcr_base->aper_clk_ctrl, "gpio_aper"); + + zynq_clk_register_aper_clk(&clks[lqspi_aper_clk], + &slcr_base->aper_clk_ctrl, "lqspi_aper"); + + zynq_clk_register_aper_clk(&clks[smc_aper_clk], + &slcr_base->aper_clk_ctrl, "smc_aper"); +} + +/** + * __zynq_clk_pll_get_rate() - Get PLL rate + * @addr: Address of the PLL's control register + * Returns the current PLL output rate. + */ +static unsigned long __zynq_clk_pll_get_rate(u32 *addr) +{ + u32 reg, mul, bypass; + + reg = readl(addr); + bypass = reg & PLLCTRL_BPFORCE_MASK; + if (bypass) + mul = 1; + else + mul = (reg & PLLCTRL_FBDIV_MASK) >> PLLCTRL_FBDIV_SHIFT; + + return CONFIG_ZYNQ_PS_CLK_FREQ * mul; +} + +/** + * zynq_clk_pll_get_rate() - Get PLL rate + * @pll: Handle of the PLL + * Returns the current clock rate of @pll. + */ +static unsigned long zynq_clk_pll_get_rate(struct clk *pll) +{ + return __zynq_clk_pll_get_rate(pll->reg); +} + +/** + * zynq_clk_register_pll() - Set up a PLL with the framework + * @clk: Pointer to struct clk for the PLL + * @ctrl: PLL control register + * @name: PLL name + * @prate: PLL input clock rate + */ +static void zynq_clk_register_pll(struct clk *clk, u32 *ctrl, char *name, + unsigned long prate) +{ + clk->name = name; + clk->reg = ctrl; + clk->frequency = zynq_clk_pll_get_rate(clk); + clk->ops.get_rate = zynq_clk_pll_get_rate; +} + +/** + * clkid_2_register() - Get clock control register + * @id: Clock identifier of one of the PLLs + * Returns the address of the requested PLL's control register. + */ +static u32 *clkid_2_register(enum zynq_clk id) +{ + switch (id) { + case armpll_clk: + return &slcr_base->arm_pll_ctrl; + case ddrpll_clk: + return &slcr_base->ddr_pll_ctrl; + case iopll_clk: + return &slcr_base->io_pll_ctrl; + default: + return &slcr_base->io_pll_ctrl; + } +} + +/* API */ +/** + * zynq_clk_early_init() - Early init for the clock framework + * + * This function is called from before relocation and sets up the CPU clock + * frequency in the global data struct. + */ +void zynq_clk_early_init(void) +{ + u32 reg = readl(&slcr_base->arm_clk_ctrl); + u32 div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT; + u32 srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT; + enum zynq_clk parent = __zynq_clk_cpu_get_parent(srcsel); + u32 *pllreg = clkid_2_register(parent); + unsigned long prate = __zynq_clk_pll_get_rate(pllreg); + + if (!div) + div = 1; + + gd->cpu_clk = DIV_ROUND_CLOSEST(prate, div); +} + +/** + * get_uart_clk() - Get UART input frequency + * @dev_index: UART ID + * Returns UART input clock frequency in Hz. + * + * Compared to zynq_clk_get_rate() this function is designed to work before + * relocation and can be called when the serial UART is set up. + */ +unsigned long get_uart_clk(int dev_index) +{ + u32 reg = readl(&slcr_base->uart_clk_ctrl); + u32 div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT; + u32 srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT; + enum zynq_clk parent = __zynq_clk_periph_get_parent(srcsel); + u32 *pllreg = clkid_2_register(parent); + unsigned long prate = __zynq_clk_pll_get_rate(pllreg); + + if (!div) + div = 1; + + return DIV_ROUND_CLOSEST(prate, div); +} + +/** + * set_cpu_clk_info() - Initialize clock framework + * Always returns zero. + * + * This function is called from common code after relocation and sets up the + * clock framework. The framework must not be used before this function had been + * called. + */ +int set_cpu_clk_info(void) +{ + zynq_clk_register_pll(&clks[armpll_clk], &slcr_base->arm_pll_ctrl, + "armpll", CONFIG_ZYNQ_PS_CLK_FREQ); + zynq_clk_register_pll(&clks[ddrpll_clk], &slcr_base->ddr_pll_ctrl, + "ddrpll", CONFIG_ZYNQ_PS_CLK_FREQ); + zynq_clk_register_pll(&clks[iopll_clk], &slcr_base->io_pll_ctrl, + "iopll", CONFIG_ZYNQ_PS_CLK_FREQ); + + init_ddr_clocks(); + init_cpu_clocks(); + init_periph_clocks(); + init_aper_clocks(); + + gd->bd->bi_arm_freq = gd->cpu_clk / 1000000; + gd->bd->bi_dsp_freq = 0; + + return 0; +} + +/** + * zynq_clk_get_rate() - Get clock rate + * @clk: Clock identifier + * Returns the current clock rate of @clk on success or zero for an invalid + * clock id. + */ +unsigned long zynq_clk_get_rate(enum zynq_clk clk) +{ + if (clk < 0 || clk >= clk_max) + return 0; + + return clks[clk].frequency; +} + +/** + * zynq_clk_set_rate() - Set clock rate + * @clk: Clock identifier + * @rate: Requested clock rate + * Passes on the return value from the clock's set_rate() function or negative + * errno. + */ +int zynq_clk_set_rate(enum zynq_clk clk, unsigned long rate) +{ + if (clk < 0 || clk >= clk_max) + return -ENODEV; + + if (clks[clk].ops.set_rate) + return clks[clk].ops.set_rate(&clks[clk], rate); + + return -ENXIO; +} + +/** + * zynq_clk_get_name() - Get clock name + * @clk: Clock identifier + * Returns the name of @clk. + */ +const char *zynq_clk_get_name(enum zynq_clk clk) +{ + return clks[clk].name; +} + +/** + * soc_clk_dump() - Print clock frequencies + * Returns zero on success + * + * Implementation for the clk dump command. + */ +int soc_clk_dump(void) +{ + int i; + + printf("clk\t\tfrequency\n"); + for (i = 0; i < clk_max; i++) { + const char *name = zynq_clk_get_name(i); + if (name) + printf("%10s%20lu\n", name, zynq_clk_get_rate(i)); + } + + return 0; +} diff --git a/arch/arm/cpu/armv7/zynq/cpu.c b/arch/arm/cpu/armv7/zynq/cpu.c index 9af340e..7626b5c 100644 --- a/arch/arm/cpu/armv7/zynq/cpu.c +++ b/arch/arm/cpu/armv7/zynq/cpu.c @@ -6,6 +6,7 @@ */ #include <common.h> #include <asm/io.h> +#include <asm/arch/clk.h> #include <asm/arch/sys_proto.h> #include <asm/arch/hardware.h> @@ -16,7 +17,7 @@ void lowlevel_init(void) int arch_cpu_init(void) { zynq_slcr_unlock(); - +#ifndef CONFIG_SPL_BUILD /* Device config APB, unlock the PCAP */ writel(0x757BDF0D, &devcfg_base->unlock); writel(0xFFFFFFFF, &devcfg_base->rom_shadow); @@ -34,7 +35,8 @@ int arch_cpu_init(void) /* Urgent write, ports S2/S3 */ writel(0xC, &slcr_base->ddr_urgent); #endif - +#endif + zynq_clk_early_init(); zynq_slcr_lock(); return 0; @@ -46,3 +48,11 @@ void reset_cpu(ulong addr) while (1) ; } + +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} +#endif diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c index b4c11c3..d7c1882 100644 --- a/arch/arm/cpu/armv7/zynq/slcr.c +++ b/arch/arm/cpu/armv7/zynq/slcr.c @@ -8,6 +8,7 @@ #include <asm/io.h> #include <malloc.h> #include <asm/arch/hardware.h> +#include <asm/arch/clk.h> #define SLCR_LOCK_MAGIC 0x767B #define SLCR_UNLOCK_MAGIC 0xDF0D @@ -50,8 +51,10 @@ void zynq_slcr_cpu_reset(void) } /* Setup clk for network */ -void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk) +void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate) { + int ret; + zynq_slcr_unlock(); if (gem_id > 1) { @@ -59,16 +62,16 @@ void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk) goto out; } + ret = zynq_clk_set_rate(gem0_clk + gem_id, clk_rate); + if (ret) + goto out; + if (gem_id) { - /* Set divisors for appropriate frequency in GEM_CLK_CTRL */ - writel(clk, &slcr_base->gem1_clk_ctrl); /* Configure GEM_RCLK_CTRL */ - writel(rclk, &slcr_base->gem1_rclk_ctrl); + writel(1, &slcr_base->gem1_rclk_ctrl); } else { - /* Set divisors for appropriate frequency in GEM_CLK_CTRL */ - writel(clk, &slcr_base->gem0_clk_ctrl); /* Configure GEM_RCLK_CTRL */ - writel(rclk, &slcr_base->gem0_rclk_ctrl); + writel(1, &slcr_base->gem0_rclk_ctrl); } udelay(100000); out: diff --git a/arch/arm/cpu/armv7/zynq/spl.c b/arch/arm/cpu/armv7/zynq/spl.c new file mode 100644 index 0000000..fcad762 --- /dev/null +++ b/arch/arm/cpu/armv7/zynq/spl.c @@ -0,0 +1,69 @@ +/* + * (C) Copyright 2014 Xilinx, Inc. Michal Simek + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <spl.h> + +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/spl.h> +#include <asm/arch/sys_proto.h> + +DECLARE_GLOBAL_DATA_PTR; + +void board_init_f(ulong dummy) +{ + ps7_init(); + + /* Clear the BSS. */ + memset(__bss_start, 0, __bss_end - __bss_start); + + /* Set global data pointer. */ + gd = &gdata; + + preloader_console_init(); + arch_cpu_init(); + board_init_r(NULL, 0); +} + +u32 spl_boot_device(void) +{ + u32 mode; + + switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) { +#ifdef CONFIG_SPL_SPI_SUPPORT + case ZYNQ_BM_QSPI: + puts("qspi boot\n"); + mode = BOOT_DEVICE_SPI; + break; +#endif +#ifdef CONFIG_SPL_MMC_SUPPORT + case ZYNQ_BM_SD: + puts("mmc boot\n"); + mode = BOOT_DEVICE_MMC1; + break; +#endif + default: + puts("Unsupported boot mode selected\n"); + hang(); + } + + return mode; +} + +#ifdef CONFIG_SPL_MMC_SUPPORT +u32 spl_boot_mode(void) +{ + return MMCSD_MODE_FAT; +} +#endif + +#ifdef CONFIG_SPL_OS_BOOT +int spl_start_uboot(void) +{ + /* boot linux */ + return 0; +} +#endif diff --git a/arch/arm/cpu/armv7/zynq/timer.c b/arch/arm/cpu/armv7/zynq/timer.c index 2be253c..303dbcf 100644 --- a/arch/arm/cpu/armv7/zynq/timer.c +++ b/arch/arm/cpu/armv7/zynq/timer.c @@ -29,6 +29,7 @@ #include <div64.h> #include <asm/io.h> #include <asm/arch/hardware.h> +#include <asm/arch/clk.h> DECLARE_GLOBAL_DATA_PTR; @@ -48,7 +49,6 @@ static struct scu_timer *timer_base = #define TIMER_LOAD_VAL 0xFFFFFFFF #define TIMER_PRESCALE 255 -#define TIMER_TICK_HZ (CONFIG_CPU_FREQ_HZ / 2 / TIMER_PRESCALE) int timer_init(void) { @@ -56,6 +56,8 @@ int timer_init(void) (TIMER_PRESCALE << SCUTIMER_CONTROL_PRESCALER_SHIFT) | SCUTIMER_CONTROL_ENABLE_MASK; + gd->arch.timer_rate_hz = (gd->cpu_clk / 2) / (TIMER_PRESCALE + 1); + /* Load the timer counter register */ writel(0xFFFFFFFF, &timer_base->load); @@ -69,7 +71,7 @@ int timer_init(void) /* Reset time */ gd->arch.lastinc = readl(&timer_base->counter) / - (TIMER_TICK_HZ / CONFIG_SYS_HZ); + (gd->arch.timer_rate_hz / CONFIG_SYS_HZ); gd->arch.tbl = 0; return 0; @@ -83,14 +85,15 @@ ulong get_timer_masked(void) { ulong now; - now = readl(&timer_base->counter) / (TIMER_TICK_HZ / CONFIG_SYS_HZ); + now = readl(&timer_base->counter) / + (gd->arch.timer_rate_hz / CONFIG_SYS_HZ); if (gd->arch.lastinc >= now) { /* Normal mode */ gd->arch.tbl += gd->arch.lastinc - now; } else { /* We have an overflow ... */ - gd->arch.tbl += gd->arch.lastinc + TIMER_LOAD_VAL - now; + gd->arch.tbl += gd->arch.lastinc + TIMER_LOAD_VAL - now + 1; } gd->arch.lastinc = now; @@ -107,7 +110,8 @@ void __udelay(unsigned long usec) if (usec == 0) return; - countticks = lldiv(TIMER_TICK_HZ * usec, 1000000); + countticks = lldiv(((unsigned long long)gd->arch.timer_rate_hz * usec), + 1000000); /* decrementing timer */ timeend = readl(&timer_base->counter) - countticks; diff --git a/arch/arm/cpu/armv7/zynq/u-boot-spl.lds b/arch/arm/cpu/armv7/zynq/u-boot-spl.lds new file mode 100644 index 0000000..0c4501e --- /dev/null +++ b/arch/arm/cpu/armv7/zynq/u-boot-spl.lds @@ -0,0 +1,61 @@ +/* + * Copyright (c) 2014 Xilinx, Inc. Michal Simek + * Copyright (c) 2004-2008 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\ + LENGTH = CONFIG_SPL_MAX_SIZE } +MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \ + LENGTH = CONFIG_SPL_BSS_MAX_SIZE } + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = ALIGN(4); + .text : + { + __image_copy_start = .; + CPUDIR/start.o (.text*) + *(.text*) + } > .sram + + . = ALIGN(4); + .rodata : { + *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) + } > .sram + + . = ALIGN(4); + .data : { + *(.data*) + } > .sram + + . = ALIGN(4); + + . = .; + + __image_copy_end = .; + + _end = .; + + /* Move BSS section to RAM because of FAT */ + .bss (NOLOAD) : { + __bss_start = .; + *(.bss*) + . = ALIGN(4); + __bss_end = .; + } > .sdram + + /DISCARD/ : { *(.dynsym) } + /DISCARD/ : { *(.dynstr*) } + /DISCARD/ : { *(.dynamic*) } + /DISCARD/ : { *(.plt*) } + /DISCARD/ : { *(.interp*) } + /DISCARD/ : { *(.gnu*) } +} diff --git a/arch/arm/cpu/ixp/u-boot.lds b/arch/arm/cpu/armv7/zynq/u-boot.lds index 676ae2c..a68b050 100644 --- a/arch/arm/cpu/ixp/u-boot.lds +++ b/arch/arm/cpu/armv7/zynq/u-boot.lds @@ -1,11 +1,13 @@ /* - * (C) Copyright 2000-2006 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * Copyright (c) 2004-2008 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> * * SPDX-License-Identifier: GPL-2.0+ */ -OUTPUT_FORMAT("elf32-bigarm", "elf32-bigarm", "elf32-bigarm") +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") OUTPUT_ARCH(arm) ENTRY(_start) SECTIONS @@ -16,7 +18,7 @@ SECTIONS .text : { *(.__image_copy_start) - arch/arm/cpu/ixp/start.o(.text*) + CPUDIR/start.o (.text*) *(.text*) } @@ -75,17 +77,23 @@ SECTIONS . = ALIGN(4); __bss_limit = .; } + .bss_end __bss_limit (OVERLAY) : { KEEP(*(.__bss_end)); } - .dynsym _end : { *(.dynsym) } - .dynbss : { *(.dynbss) } - .dynstr : { *(.dynstr*) } - .dynamic : { *(.dynamic*) } - .hash : { *(.hash*) } - .plt : { *(.plt*) } - .interp : { *(.interp*) } - .gnu : { *(.gnu*) } - .ARM.exidx : { *(.ARM.exidx*) } + /* + * Zynq needs to discard more sections because the user + * is expected to pass this image on to tools for boot.bin + * generation that require them to be dropped. + */ + /DISCARD/ : { *(.dynsym) } + /DISCARD/ : { *(.dynbss*) } + /DISCARD/ : { *(.dynstr*) } + /DISCARD/ : { *(.dynamic*) } + /DISCARD/ : { *(.plt*) } + /DISCARD/ : { *(.interp*) } + /DISCARD/ : { *(.gnu*) } + /DISCARD/ : { *(.ARM.exidx*) } + /DISCARD/ : { *(.gnu.linkonce.armexidx.*) } } diff --git a/arch/arm/cpu/ixp/Makefile b/arch/arm/cpu/ixp/Makefile deleted file mode 100644 index 4e66523..0000000 --- a/arch/arm/cpu/ixp/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -extra-y = start.o - -obj-y += cpu.o -obj-$(CONFIG_USE_IRQ) += interrupts.o -obj-y += timer.o diff --git a/arch/arm/cpu/ixp/config.mk b/arch/arm/cpu/ixp/config.mk deleted file mode 100644 index 894861f..0000000 --- a/arch/arm/cpu/ixp/config.mk +++ /dev/null @@ -1,16 +0,0 @@ -# -# (C) Copyright 2002 -# Sysgo Real-Time Solutions, GmbH <www.elinos.com> -# Marius Groeger <mgroeger@sysgo.de> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -BIG_ENDIAN = y - -PLATFORM_RELFLAGS += -mbig-endian - -PLATFORM_CPPFLAGS += -mbig-endian -march=armv5te -mtune=strongarm1100 - -PLATFORM_LDFLAGS += -EB -USE_PRIVATE_LIBGCC = yes diff --git a/arch/arm/cpu/ixp/cpu.c b/arch/arm/cpu/ixp/cpu.c deleted file mode 100644 index 4387c18..0000000 --- a/arch/arm/cpu/ixp/cpu.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke <azu@sysgo.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * CPU specific code - */ - -#include <common.h> -#include <command.h> -#include <netdev.h> -#include <asm/arch/ixp425.h> -#include <asm/system.h> - -static void cache_flush(void); - -#if defined(CONFIG_DISPLAY_CPUINFO) -int print_cpuinfo (void) -{ - unsigned long id; - int speed = 0; - - asm ("mrc p15, 0, %0, c0, c0, 0":"=r" (id)); - - puts("CPU: Intel IXP425 at "); - switch ((id & 0x000003f0) >> 4) { - case 0x1c: - speed = 533; - break; - - case 0x1d: - speed = 400; - break; - - case 0x1f: - speed = 266; - break; - } - - if (speed) - printf("%d MHz\n", speed); - else - puts("unknown revision\n"); - - return 0; -} -#endif /* CONFIG_DISPLAY_CPUINFO */ - -int cleanup_before_linux (void) -{ - /* - * this function is called just before we call linux - * it prepares the processor for linux - * - * just disable everything that can disturb booting linux - */ - - disable_interrupts (); - - /* turn off I-cache */ - icache_disable(); - dcache_disable(); - - /* flush I-cache */ - cache_flush(); - - return 0; -} - -/* flush I/D-cache */ -static void cache_flush (void) -{ - unsigned long i = 0; - - asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i)); -} - -/* FIXME */ -/* -void pci_init(void) -{ - return; -} -*/ - -int cpu_eth_init(bd_t *bis) -{ -#ifdef CONFIG_IXP4XX_NPE - npe_initialize(bis); -#endif - return 0; -} diff --git a/arch/arm/cpu/ixp/interrupts.c b/arch/arm/cpu/ixp/interrupts.c deleted file mode 100644 index 7694c6a..0000000 --- a/arch/arm/cpu/ixp/interrupts.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * (C) Copyright 2006 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke <azu@sysgo.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/ixp425.h> -#include <asm/proc-armv/ptrace.h> - -struct _irq_handler { - void *m_data; - void (*m_func)( void *data); -}; - -static struct _irq_handler IRQ_HANDLER[N_IRQS]; - -static void default_isr(void *data) -{ - printf("default_isr(): called for IRQ %d, Interrupt Status=%x PR=%x\n", - (int)data, *IXP425_ICIP, *IXP425_ICIH); -} - -static int next_irq(void) -{ - return (((*IXP425_ICIH & 0x000000fc) >> 2) - 1); -} - -void do_irq (struct pt_regs *pt_regs) -{ - int irq = next_irq(); - - IRQ_HANDLER[irq].m_func(IRQ_HANDLER[irq].m_data); -} - -void irq_install_handler (int irq, interrupt_handler_t handle_irq, void *data) -{ - if (irq >= N_IRQS || !handle_irq) - return; - - IRQ_HANDLER[irq].m_data = data; - IRQ_HANDLER[irq].m_func = handle_irq; -} - -int arch_interrupt_init (void) -{ - int i; - - /* install default interrupt handlers */ - for (i = 0; i < N_IRQS; i++) - irq_install_handler(i, default_isr, (void *)i); - - /* configure interrupts for IRQ mode */ - *IXP425_ICLR = 0x00000000; - - return (0); -} diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S deleted file mode 100644 index 82c868a..0000000 --- a/arch/arm/cpu/ixp/start.S +++ /dev/null @@ -1,430 +0,0 @@ -/* vi: set ts=8 sw=8 noet: */ -/* - * u-boot - Startup Code for XScale IXP - * - * Copyright (C) 2003 Kyle Harris <kharris@nexus-tech.net> - * - * Based on startup code example contained in the - * Intel IXP4xx Programmer's Guide and past u-boot Start.S - * samples. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm-offsets.h> -#include <config.h> -#include <version.h> -#include <asm/arch/ixp425.h> - -#define MMU_Control_M 0x001 /* Enable MMU */ -#define MMU_Control_A 0x002 /* Enable address alignment faults */ -#define MMU_Control_C 0x004 /* Enable cache */ -#define MMU_Control_W 0x008 /* Enable write-buffer */ -#define MMU_Control_P 0x010 /* Compatability: 32 bit code */ -#define MMU_Control_D 0x020 /* Compatability: 32 bit data */ -#define MMU_Control_L 0x040 /* Compatability: */ -#define MMU_Control_B 0x080 /* Enable Big-Endian */ -#define MMU_Control_S 0x100 /* Enable system protection */ -#define MMU_Control_R 0x200 /* Enable ROM protection */ -#define MMU_Control_I 0x1000 /* Enable Instruction cache */ -#define MMU_Control_X 0x2000 /* Set interrupt vectors at 0xFFFF0000 */ -#define MMU_Control_Init (MMU_Control_P|MMU_Control_D|MMU_Control_L) - - -/* - * Macro definitions - */ - /* Delay a bit */ - .macro DELAY_FOR cycles, reg0 - ldr \reg0, =\cycles - subs \reg0, \reg0, #1 - subne pc, pc, #0xc - .endm - - /* wait for coprocessor write complete */ - .macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 - .endm - -.globl _start -_start: - ldr pc, _reset - ldr pc, _undefined_instruction - ldr pc, _software_interrupt - ldr pc, _prefetch_abort - ldr pc, _data_abort - ldr pc, _not_used - ldr pc, _irq - ldr pc, _fiq - -_reset: .word reset -_undefined_instruction: .word undefined_instruction -_software_interrupt: .word software_interrupt -_prefetch_abort: .word prefetch_abort -_data_abort: .word data_abort -_not_used: .word not_used -_irq: .word irq -_fiq: .word fiq - - .balignl 16,0xdeadbeef - - -/* - * Startup Code (reset vector) - * - * do important init only if we don't start from memory! - * - relocate armboot to ram - * - setup stack - * - jump to second stage - */ - -.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - -#ifdef CONFIG_USE_IRQ -/* IRQ stack memory (calculated at run-time) */ -.globl IRQ_STACK_START -IRQ_STACK_START: - .word 0x0badc0de - -/* IRQ stack memory (calculated at run-time) */ -.globl FIQ_STACK_START -FIQ_STACK_START: - .word 0x0badc0de -#endif - -/* IRQ stack memory (calculated at run-time) + 8 bytes */ -.globl IRQ_STACK_START_IN -IRQ_STACK_START_IN: - .word 0x0badc0de - -/* - * the actual reset code - */ - -reset: - /* disable mmu, set big-endian */ - mov r0, #0xf8 - mcr p15, 0, r0, c1, c0, 0 - CPWAIT r0 - - /* invalidate I & D caches & BTB */ - mcr p15, 0, r0, c7, c7, 0 - CPWAIT r0 - - /* invalidate I & Data TLB */ - mcr p15, 0, r0, c8, c7, 0 - CPWAIT r0 - - /* drain write and fill buffers */ - mcr p15, 0, r0, c7, c10, 4 - CPWAIT r0 - - /* disable write buffer coalescing */ - mrc p15, 0, r0, c1, c0, 1 - orr r0, r0, #1 - mcr p15, 0, r0, c1, c0, 1 - CPWAIT r0 - - /* set EXP CS0 to the optimum timing */ - ldr r1, =CONFIG_SYS_EXP_CS0 - ldr r2, =IXP425_EXP_CS0 - str r1, [r2] - - /* make sure flash is visible at 0 */ - mov r1, #CONFIG_SYS_SDR_CONFIG - ldr r2, =IXP425_SDR_CONFIG - str r1, [r2] - - /* disable refresh cycles */ - mov r1, #0 - ldr r3, =IXP425_SDR_REFRESH - str r1, [r3] - - /* send nop command */ - mov r1, #3 - ldr r4, =IXP425_SDR_IR - str r1, [r4] - DELAY_FOR 0x4000, r0 - - /* set SDRAM internal refresh val */ - ldr r1, =CONFIG_SYS_SDRAM_REFRESH_CNT - str r1, [r3] - DELAY_FOR 0x4000, r0 - - /* send precharge-all command to close all open banks */ - mov r1, #2 - str r1, [r4] - DELAY_FOR 0x4000, r0 - - /* provide 8 auto-refresh cycles */ - mov r1, #4 - mov r5, #8 -111: str r1, [r4] - DELAY_FOR 0x100, r0 - subs r5, r5, #1 - bne 111b - - /* set mode register in sdram */ - mov r1, #CONFIG_SYS_SDR_MODE_CONFIG - str r1, [r4] - DELAY_FOR 0x4000, r0 - - /* send normal operation command */ - mov r1, #6 - str r1, [r4] - DELAY_FOR 0x4000, r0 - - /* invalidate I & D caches & BTB */ - mcr p15, 0, r0, c7, c7, 0 - CPWAIT r0 - - /* invalidate I & Data TLB */ - mcr p15, 0, r0, c8, c7, 0 - CPWAIT r0 - - /* drain write and fill buffers */ - mcr p15, 0, r0, c7, c10, 4 - CPWAIT r0 - - /* remove flash mirror at 0x00000000 */ - ldr r2, =IXP425_EXP_CFG0 - ldr r1, [r2] - bic r1, r1, #0x80000000 - str r1, [r2] - - /* invalidate I & Data TLB */ - mcr p15, 0, r0, c8, c7, 0 - CPWAIT r0 - - /* enable I cache */ - mrc p15, 0, r0, c1, c0, 0 - orr r0, r0, #MMU_Control_I - mcr p15, 0, r0, c1, c0, 0 - CPWAIT r0 - - mrs r0,cpsr /* set the cpu to SVC32 mode */ - bic r0,r0,#0x1f /* (superviser mode, M=10011) */ - orr r0,r0,#0x13 - msr cpsr,r0 - - bl _main - -/*------------------------------------------------------------------------------*/ - - .globl c_runtime_cpu_setup -c_runtime_cpu_setup: - - bx lr - -/****************************************************************************/ -/* */ -/* Interrupt handling */ -/* */ -/****************************************************************************/ - -/* IRQ stack frame */ - -#define S_FRAME_SIZE 72 - -#define S_OLD_R0 68 -#define S_PSR 64 -#define S_PC 60 -#define S_LR 56 -#define S_SP 52 - -#define S_IP 48 -#define S_FP 44 -#define S_R10 40 -#define S_R9 36 -#define S_R8 32 -#define S_R7 28 -#define S_R6 24 -#define S_R5 20 -#define S_R4 16 -#define S_R3 12 -#define S_R2 8 -#define S_R1 4 -#define S_R0 0 - -#define MODE_SVC 0x13 - - /* use bad_save_user_regs for abort/prefetch/undef/swi ... */ - - .macro bad_save_user_regs - sub sp, sp, #S_FRAME_SIZE - stmia sp, {r0 - r12} /* Calling r0-r12 */ - add r8, sp, #S_PC - - ldr r2, IRQ_STACK_START_IN - ldmia r2, {r2 - r4} /* get pc, cpsr, old_r0 */ - add r0, sp, #S_FRAME_SIZE /* restore sp_SVC */ - - add r5, sp, #S_SP - mov r1, lr - stmia r5, {r0 - r4} /* save sp_SVC, lr_SVC, pc, cpsr, old_r */ - mov r0, sp - .endm - - - /* use irq_save_user_regs / irq_restore_user_regs for */ - /* IRQ/FIQ handling */ - - .macro irq_save_user_regs - sub sp, sp, #S_FRAME_SIZE - stmia sp, {r0 - r12} /* Calling r0-r12 */ - add r8, sp, #S_PC - stmdb r8, {sp, lr}^ /* Calling SP, LR */ - str lr, [r8, #0] /* Save calling PC */ - mrs r6, spsr - str r6, [r8, #4] /* Save CPSR */ - str r0, [r8, #8] /* Save OLD_R0 */ - mov r0, sp - .endm - - .macro irq_restore_user_regs - ldmia sp, {r0 - lr}^ @ Calling r0 - lr - mov r0, r0 - ldr lr, [sp, #S_PC] @ Get PC - add sp, sp, #S_FRAME_SIZE - subs pc, lr, #4 @ return & move spsr_svc into cpsr - .endm - - .macro get_bad_stack - ldr r13, IRQ_STACK_START_IN @ setup our mode stack - - str lr, [r13] @ save caller lr / spsr - mrs lr, spsr - str lr, [r13, #4] - - mov r13, #MODE_SVC @ prepare SVC-Mode - msr spsr_c, r13 - mov lr, pc - movs pc, lr - .endm - - .macro get_irq_stack @ setup IRQ stack - ldr sp, IRQ_STACK_START - .endm - - .macro get_fiq_stack @ setup FIQ stack - ldr sp, FIQ_STACK_START - .endm - - -/****************************************************************************/ -/* */ -/* exception handlers */ -/* */ -/****************************************************************************/ - - .align 5 -undefined_instruction: - get_bad_stack - bad_save_user_regs - bl do_undefined_instruction - - .align 5 -software_interrupt: - get_bad_stack - bad_save_user_regs - bl do_software_interrupt - - .align 5 -prefetch_abort: - get_bad_stack - bad_save_user_regs - bl do_prefetch_abort - - .align 5 -data_abort: - get_bad_stack - bad_save_user_regs - bl do_data_abort - - .align 5 -not_used: - get_bad_stack - bad_save_user_regs - bl do_not_used - -#ifdef CONFIG_USE_IRQ - - .align 5 -irq: - get_irq_stack - irq_save_user_regs - bl do_irq - irq_restore_user_regs - - .align 5 -fiq: - get_fiq_stack - irq_save_user_regs /* someone ought to write a more */ - bl do_fiq /* effiction fiq_save_user_regs */ - irq_restore_user_regs - -#else - - .align 5 -irq: - get_bad_stack - bad_save_user_regs - bl do_irq - - .align 5 -fiq: - get_bad_stack - bad_save_user_regs - bl do_fiq - -#endif - -/****************************************************************************/ -/* */ -/* Reset function: Use Watchdog to reset */ -/* */ -/****************************************************************************/ - - .align 5 -.globl reset_cpu - -reset_cpu: - ldr r1, =0x482e - ldr r2, =IXP425_OSWK - str r1, [r2] - ldr r1, =0x0fff - ldr r2, =IXP425_OSWT - str r1, [r2] - ldr r1, =0x5 - ldr r2, =IXP425_OSWE - str r1, [r2] - b reset_endless - -reset_endless: - b reset_endless diff --git a/arch/arm/cpu/ixp/timer.c b/arch/arm/cpu/ixp/timer.c deleted file mode 100644 index 38e2e28..0000000 --- a/arch/arm/cpu/ixp/timer.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * (C) Copyright 2010 - * Michael Schwingen, michael@schwingen.org - * - * (C) Copyright 2006 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke <azu@sysgo.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/ixp425.h> -#include <asm/io.h> -#include <div64.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * The IXP42x time-stamp timer runs at 2*OSC_IN (66.666MHz when using a - * 33.333MHz crystal). - */ -static inline unsigned long long tick_to_time(unsigned long long tick) -{ - tick *= CONFIG_SYS_HZ; - do_div(tick, CONFIG_IXP425_TIMER_CLK); - return tick; -} - -static inline unsigned long long time_to_tick(unsigned long long time) -{ - time *= CONFIG_IXP425_TIMER_CLK; - do_div(time, CONFIG_SYS_HZ); - return time; -} - -static inline unsigned long long us_to_tick(unsigned long long us) -{ - us = us * CONFIG_IXP425_TIMER_CLK + 999999; - do_div(us, 1000000); - return us; -} - -unsigned long long get_ticks(void) -{ - ulong now = readl(IXP425_OSTS_B); - - if (readl(IXP425_OSST) & IXP425_OSST_TIMER_TS_PEND) { - /* rollover of timestamp timer register */ - gd->arch.timestamp += (0xFFFFFFFF - gd->arch.lastinc) + now + 1; - writel(IXP425_OSST_TIMER_TS_PEND, IXP425_OSST); - } else { - /* move stamp forward with absolut diff ticks */ - gd->arch.timestamp += (now - gd->arch.lastinc); - } - gd->arch.lastinc = now; - return gd->arch.timestamp; -} - - -void reset_timer_masked(void) -{ - /* capture current timestamp counter */ - gd->arch.lastinc = readl(IXP425_OSTS_B); - /* start "advancing" time stamp from 0 */ - gd->arch.timestamp = 0; -} - -ulong get_timer_masked(void) -{ - return tick_to_time(get_ticks()); -} - -ulong get_timer(ulong base) -{ - return get_timer_masked() - base; -} - -/* delay x useconds AND preserve advance timestamp value */ -void __udelay(unsigned long usec) -{ - unsigned long long tmp; - - tmp = get_ticks() + us_to_tick(usec); - - while (get_ticks() < tmp) - ; -} - -int timer_init(void) -{ - writel(IXP425_OSST_TIMER_TS_PEND, IXP425_OSST); - return 0; -} diff --git a/arch/arm/cpu/pxa/config.mk b/arch/arm/cpu/pxa/config.mk index 986b11b..525f5d3 100644 --- a/arch/arm/cpu/pxa/config.mk +++ b/arch/arm/cpu/pxa/config.mk @@ -18,5 +18,5 @@ PLATFORM_CPPFLAGS += -mcpu=xscale # #ifdef CONFIG_SPL_BUILD -OBJCFLAGS += -j .text.0 -j .text.1 +OBJCOPYFLAGS += -j .text.0 -j .text.1 #endif diff --git a/arch/arm/cpu/tegra-common/Makefile b/arch/arm/cpu/tegra-common/Makefile index edfc1a8..34d5734 100644 --- a/arch/arm/cpu/tegra-common/Makefile +++ b/arch/arm/cpu/tegra-common/Makefile @@ -8,4 +8,5 @@ # obj-y += lowlevel_init.o -obj-y += ap.o board.o sys_info.o clock.o cache.o +obj-y += ap.o board.o clock.o cache.o +obj-$(CONFIG_DISPLAY_CPUINFO) += sys_info.o diff --git a/arch/arm/cpu/tegra-common/ap.c b/arch/arm/cpu/tegra-common/ap.c index 60d71a6..91d70da 100644 --- a/arch/arm/cpu/tegra-common/ap.c +++ b/arch/arm/cpu/tegra-common/ap.c @@ -1,5 +1,5 @@ /* -* (C) Copyright 2010-2011 +* (C) Copyright 2010-2014 * NVIDIA Corporation <www.nvidia.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -27,7 +27,7 @@ int tegra_get_chip(void) /* * This is undocumented, Chip ID is bits 15:8 of the register * APB_MISC + 0x804, and has value 0x20 for Tegra20, 0x30 for - * Tegra30, and 0x35 for T114. + * Tegra30, 0x35 for T114, and 0x40 for Tegra124. */ rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT; debug("%s: CHIPID is 0x%02X\n", __func__, rev); @@ -72,6 +72,7 @@ int tegra_get_chip_sku(void) case SKU_ID_T33: case SKU_ID_T30: case SKU_ID_TM30MQS_P_A3: + default: return TEGRA_SOC_T30; } break; @@ -79,10 +80,19 @@ int tegra_get_chip_sku(void) switch (sku_id) { case SKU_ID_T114_ENG: case SKU_ID_T114_1: + default: return TEGRA_SOC_T114; } break; + case CHIPID_TEGRA124: + switch (sku_id) { + case SKU_ID_T124_ENG: + default: + return TEGRA_SOC_T124; + } + break; } + /* unknown chip/sku id */ printf("%s: ERROR: UNKNOWN CHIP/SKU ID COMBO (0x%02X/0x%02X)\n", __func__, chip_id, sku_id); @@ -117,8 +127,8 @@ static u32 get_odmdata(void) * ODMDATA is stored in the BCT in IRAM by the BootROM. * The BCT start and size are stored in the BIT in IRAM. * Read the data @ bct_start + (bct_size - 12). This works - * on T20 and T30 BCTs, which are locked down. If this changes - * in new chips (T114, etc.), we can revisit this algorithm. + * on BCTs for currently supported SoCs, which are locked down. + * If this changes in new chips, we can revisit this algorithm. */ u32 bct_start, odmdata; diff --git a/arch/arm/cpu/tegra-common/board.c b/arch/arm/cpu/tegra-common/board.c index d9cbda8..6a6faf4 100644 --- a/arch/arm/cpu/tegra-common/board.c +++ b/arch/arm/cpu/tegra-common/board.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2010,2011 + * (C) Copyright 2010-2014 * NVIDIA Corporation <www.nvidia.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -109,12 +109,18 @@ static int uart_configs[] = { -1, -1, -1, -#else /* Tegra114 */ +#elif defined(CONFIG_TEGRA114) -1, -1, -1, FUNCMUX_UART4_GMI, /* UARTD */ -1, +#else /* Tegra124 */ + FUNCMUX_UART1_KBC, /* UARTA */ + -1, + -1, + FUNCMUX_UART4_GPIO, /* UARTD */ + -1, #endif }; diff --git a/arch/arm/cpu/tegra-common/cache.c b/arch/arm/cpu/tegra-common/cache.c index 48e9319..94f5bce 100644 --- a/arch/arm/cpu/tegra-common/cache.c +++ b/arch/arm/cpu/tegra-common/cache.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2013-2014, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -23,8 +23,6 @@ void config_cache(void) { - struct apb_misc_gp_ctlr *gp = - (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE; u32 reg = 0; /* enable SMP mode and FW for CPU0, by writing to Auxiliary Ctl reg */ @@ -33,10 +31,10 @@ void config_cache(void) "orr r0, r0, #0x41\n" "mcr p15, 0, r0, c1, c0, 1\n"); - /* Currently, only T114 needs this L2 cache change to boot Linux */ - reg = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK); - if (reg != (CHIPID_TEGRA114 << HIDREV_CHIPID_SHIFT)) + /* Currently, only Tegra114+ needs this L2 cache change to boot Linux */ + if (tegra_get_chip() < CHIPID_TEGRA114) return; + /* * Systems with an architectural L2 cache must not use the PL310. * Config L2CTLR here for a data RAM latency of 3 cycles. diff --git a/arch/arm/cpu/tegra-common/clock.c b/arch/arm/cpu/tegra-common/clock.c index 268fb91..11c7435 100644 --- a/arch/arm/cpu/tegra-common/clock.c +++ b/arch/arm/cpu/tegra-common/clock.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2010-2014, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -142,8 +142,8 @@ void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source, value = readl(reg); - value &= ~OUT_CLK_SOURCE_MASK; - value |= source << OUT_CLK_SOURCE_SHIFT; + value &= ~OUT_CLK_SOURCE_31_30_MASK; + value |= source << OUT_CLK_SOURCE_31_30_SHIFT; value &= ~OUT_CLK_DIVISOR_MASK; value |= divisor << OUT_CLK_DIVISOR_SHIFT; @@ -155,8 +155,8 @@ void clock_ll_set_source(enum periph_id periph_id, unsigned source) { u32 *reg = get_periph_source_reg(periph_id); - clrsetbits_le32(reg, OUT_CLK_SOURCE_MASK, - source << OUT_CLK_SOURCE_SHIFT); + clrsetbits_le32(reg, OUT_CLK_SOURCE_31_30_MASK, + source << OUT_CLK_SOURCE_31_30_SHIFT); } /** @@ -304,13 +304,27 @@ static int adjust_periph_pll(enum periph_id periph_id, int source, /* work out the source clock and set it */ if (source < 0) return -1; - if (mux_bits == 4) { - clrsetbits_le32(reg, OUT_CLK_SOURCE4_MASK, - source << OUT_CLK_SOURCE4_SHIFT); - } else { - clrsetbits_le32(reg, OUT_CLK_SOURCE_MASK, - source << OUT_CLK_SOURCE_SHIFT); + + switch (mux_bits) { + case MASK_BITS_31_30: + clrsetbits_le32(reg, OUT_CLK_SOURCE_31_30_MASK, + source << OUT_CLK_SOURCE_31_30_SHIFT); + break; + + case MASK_BITS_31_29: + clrsetbits_le32(reg, OUT_CLK_SOURCE_31_29_MASK, + source << OUT_CLK_SOURCE_31_29_SHIFT); + break; + + case MASK_BITS_31_28: + clrsetbits_le32(reg, OUT_CLK_SOURCE_31_28_MASK, + source << OUT_CLK_SOURCE_31_28_SHIFT); + break; + + default: + return -1; } + udelay(2); return 0; } @@ -561,3 +575,95 @@ void clock_init(void) /* Do any special system timer/TSC setup */ arch_timer_init(); } + +static void set_avp_clock_source(u32 src) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 val; + + val = (src << SCLK_SWAKEUP_FIQ_SOURCE_SHIFT) | + (src << SCLK_SWAKEUP_IRQ_SOURCE_SHIFT) | + (src << SCLK_SWAKEUP_RUN_SOURCE_SHIFT) | + (src << SCLK_SWAKEUP_IDLE_SOURCE_SHIFT) | + (SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT); + writel(val, &clkrst->crc_sclk_brst_pol); + udelay(3); +} + +/* + * This function is useful on Tegra30, and any later SoCs that have compatible + * PLLP configuration registers. + */ +void tegra30_set_up_pllp(void) +{ + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 reg; + + /* + * Based on the Tegra TRM, the system clock (which is the AVP clock) can + * run up to 275MHz. On power on, the default sytem clock source is set + * to PLLP_OUT0. This function sets PLLP's (hence PLLP_OUT0's) rate to + * 408MHz which is beyond system clock's upper limit. + * + * The fix is to set the system clock to CLK_M before initializing PLLP, + * and then switch back to PLLP_OUT4, which has an appropriate divider + * configured, after PLLP has been configured + */ + set_avp_clock_source(SCLK_SOURCE_CLKM); + + /* + * PLLP output frequency set to 408Mhz + * PLLC output frequency set to 228Mhz + */ + switch (clock_get_osc_freq()) { + case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */ + clock_set_rate(CLOCK_ID_PERIPH, 408, 12, 0, 8); + clock_set_rate(CLOCK_ID_CGENERAL, 456, 12, 1, 8); + break; + + case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */ + clock_set_rate(CLOCK_ID_PERIPH, 408, 26, 0, 8); + clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8); + break; + + case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */ + clock_set_rate(CLOCK_ID_PERIPH, 408, 13, 0, 8); + clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8); + break; + case CLOCK_OSC_FREQ_19_2: + default: + /* + * These are not supported. It is too early to print a + * message and the UART likely won't work anyway due to the + * oscillator being wrong. + */ + break; + } + + /* Set PLLP_OUT1, 2, 3 & 4 freqs to 9.6, 48, 102 & 204MHz */ + + /* OUT1, 2 */ + /* Assert RSTN before enable */ + reg = PLLP_OUT2_RSTN_EN | PLLP_OUT1_RSTN_EN; + writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[0]); + /* Set divisor and reenable */ + reg = (IN_408_OUT_48_DIVISOR << PLLP_OUT2_RATIO) + | PLLP_OUT2_OVR | PLLP_OUT2_CLKEN | PLLP_OUT2_RSTN_DIS + | (IN_408_OUT_9_6_DIVISOR << PLLP_OUT1_RATIO) + | PLLP_OUT1_OVR | PLLP_OUT1_CLKEN | PLLP_OUT1_RSTN_DIS; + writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[0]); + + /* OUT3, 4 */ + /* Assert RSTN before enable */ + reg = PLLP_OUT4_RSTN_EN | PLLP_OUT3_RSTN_EN; + writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[1]); + /* Set divisor and reenable */ + reg = (IN_408_OUT_204_DIVISOR << PLLP_OUT4_RATIO) + | PLLP_OUT4_OVR | PLLP_OUT4_CLKEN | PLLP_OUT4_RSTN_DIS + | (IN_408_OUT_102_DIVISOR << PLLP_OUT3_RATIO) + | PLLP_OUT3_OVR | PLLP_OUT3_CLKEN | PLLP_OUT3_RSTN_DIS; + writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[1]); + + set_avp_clock_source(SCLK_SOURCE_PLLP_OUT4); +} diff --git a/arch/arm/cpu/tegra-common/sys_info.c b/arch/arm/cpu/tegra-common/sys_info.c index dc8a2e4..de20325 100644 --- a/arch/arm/cpu/tegra-common/sys_info.c +++ b/arch/arm/cpu/tegra-common/sys_info.c @@ -8,7 +8,6 @@ #include <common.h> #include <linux/ctype.h> -#ifdef CONFIG_DISPLAY_CPUINFO void upstring(char *s) { while (*s) { @@ -30,4 +29,3 @@ int print_cpuinfo(void) /* TBD: Add printf of major/minor rev info, stepping, etc. */ return 0; } -#endif /* CONFIG_DISPLAY_CPUINFO */ diff --git a/arch/arm/cpu/tegra114-common/clock.c b/arch/arm/cpu/tegra114-common/clock.c index 5c4305a..d5194e1 100644 --- a/arch/arm/cpu/tegra114-common/clock.c +++ b/arch/arm/cpu/tegra114-common/clock.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2010-2014, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -61,12 +61,6 @@ enum { CLOCK_MAX_MUX = 8 /* number of source options for each clock */ }; -enum { - MASK_BITS_31_30 = 2, /* num of bits used to specify clock source */ - MASK_BITS_31_29, - MASK_BITS_29_28, -}; - /* * Clock source mux for each clock type. This just converts our enum into * a list of mux sources for use by the code. @@ -109,7 +103,7 @@ static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = { MASK_BITS_31_29}, { CLK(PERIPH), CLK(CGENERAL), CLK(SFROM32KHZ), CLK(OSC), CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), - MASK_BITS_29_28} + MASK_BITS_31_28} }; /* @@ -610,26 +604,24 @@ void clock_early_init(void) struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + tegra30_set_up_pllp(); + /* - * PLLP output frequency set to 408Mhz * PLLC output frequency set to 600Mhz * PLLD output frequency set to 925Mhz */ switch (clock_get_osc_freq()) { case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */ - clock_set_rate(CLOCK_ID_PERIPH, 408, 12, 0, 8); clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8); clock_set_rate(CLOCK_ID_DISPLAY, 925, 12, 0, 12); break; case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */ - clock_set_rate(CLOCK_ID_PERIPH, 408, 26, 0, 8); clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8); clock_set_rate(CLOCK_ID_DISPLAY, 925, 26, 0, 12); break; case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */ - clock_set_rate(CLOCK_ID_PERIPH, 408, 13, 0, 8); clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8); clock_set_rate(CLOCK_ID_DISPLAY, 925, 13, 0, 12); break; diff --git a/arch/arm/cpu/tegra124-common/Makefile b/arch/arm/cpu/tegra124-common/Makefile new file mode 100644 index 0000000..ff77992 --- /dev/null +++ b/arch/arm/cpu/tegra124-common/Makefile @@ -0,0 +1,10 @@ +# +# (C) Copyright 2013-2014 +# NVIDIA Corporation <www.nvidia.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += clock.o +obj-y += funcmux.o +obj-y += pinmux.o diff --git a/arch/arm/cpu/tegra124-common/clock.c b/arch/arm/cpu/tegra124-common/clock.c new file mode 100644 index 0000000..7394363 --- /dev/null +++ b/arch/arm/cpu/tegra124-common/clock.c @@ -0,0 +1,826 @@ +/* + * (C) Copyright 2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* Tegra124 Clock control functions */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/sysctr.h> +#include <asm/arch/tegra.h> +#include <asm/arch-tegra/clk_rst.h> +#include <asm/arch-tegra/timer.h> +#include <div64.h> +#include <fdtdec.h> + +/* + * Clock types that we can use as a source. The Tegra124 has muxes for the + * peripheral clocks, and in most cases there are four options for the clock + * source. This gives us a clock 'type' and exploits what commonality exists + * in the device. + * + * Letters are obvious, except for T which means CLK_M, and S which means the + * clock derived from 32KHz. Beware that CLK_M (also called OSC in the + * datasheet) and PLL_M are different things. The former is the basic + * clock supplied to the SOC from an external oscillator. The latter is the + * memory clock PLL. + * + * See definitions in clock_id in the header file. + */ +enum clock_type_id { + CLOCK_TYPE_AXPT, /* PLL_A, PLL_X, PLL_P, CLK_M */ + CLOCK_TYPE_MCPA, /* and so on */ + CLOCK_TYPE_MCPT, + CLOCK_TYPE_PCM, + CLOCK_TYPE_PCMT, + CLOCK_TYPE_PDCT, + CLOCK_TYPE_ACPT, + CLOCK_TYPE_ASPTE, + CLOCK_TYPE_PMDACD2T, + CLOCK_TYPE_PCST, + + CLOCK_TYPE_PC2CC3M, + CLOCK_TYPE_PC2CC3S_T, + CLOCK_TYPE_PC2CC3M_T, + CLOCK_TYPE_PC2CC3M_T16, /* PC2CC3M_T, but w/16-bit divisor (I2C) */ + CLOCK_TYPE_MC2CC3P_A, + CLOCK_TYPE_M, + CLOCK_TYPE_MCPTM2C2C3, + CLOCK_TYPE_PC2CC3T_S, + CLOCK_TYPE_AC2CC3P_TS2, + + CLOCK_TYPE_COUNT, + CLOCK_TYPE_NONE = -1, /* invalid clock type */ +}; + +enum { + CLOCK_MAX_MUX = 8 /* number of source options for each clock */ +}; + +/* + * Clock source mux for each clock type. This just converts our enum into + * a list of mux sources for use by the code. + * + * Note: + * The extra column in each clock source array is used to store the mask + * bits in its register for the source. + */ +#define CLK(x) CLOCK_ID_ ## x +static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = { + { CLK(AUDIO), CLK(XCPU), CLK(PERIPH), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(AUDIO), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(NONE), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(PERIPH), CLK(DISPLAY), CLK(CGENERAL), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(AUDIO), CLK(CGENERAL), CLK(PERIPH), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(AUDIO), CLK(SFROM32KHZ), CLK(PERIPH), CLK(OSC), + CLK(EPCI), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_29}, + { CLK(PERIPH), CLK(MEMORY), CLK(DISPLAY), CLK(AUDIO), + CLK(CGENERAL), CLK(DISPLAY2), CLK(OSC), CLK(NONE), + MASK_BITS_31_29}, + { CLK(PERIPH), CLK(CGENERAL), CLK(SFROM32KHZ), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_28}, + + /* Additional clock types on Tegra114+ */ + /* CLOCK_TYPE_PC2CC3M */ + { CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), + CLK(MEMORY), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_29}, + /* CLOCK_TYPE_PC2CC3S_T */ + { CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), + CLK(SFROM32KHZ), CLK(NONE), CLK(OSC), CLK(NONE), + MASK_BITS_31_29}, + /* CLOCK_TYPE_PC2CC3M_T */ + { CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), + CLK(MEMORY), CLK(NONE), CLK(OSC), CLK(NONE), + MASK_BITS_31_29}, + /* CLOCK_TYPE_PC2CC3M_T, w/16-bit divisor (I2C) */ + { CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), + CLK(MEMORY), CLK(NONE), CLK(OSC), CLK(NONE), + MASK_BITS_31_29}, + /* CLOCK_TYPE_MC2CC3P_A */ + { CLK(MEMORY), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), + CLK(PERIPH), CLK(NONE), CLK(AUDIO), CLK(NONE), + MASK_BITS_31_29}, + /* CLOCK_TYPE_M */ + { CLK(MEMORY), CLK(NONE), CLK(NONE), CLK(NONE), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + /* CLOCK_TYPE_MCPTM2C2C3 */ + { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC), + CLK(MEMORY2), CLK(CGENERAL2), CLK(CGENERAL3), CLK(NONE), + MASK_BITS_31_29}, + /* CLOCK_TYPE_PC2CC3T_S */ + { CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), + CLK(OSC), CLK(NONE), CLK(SFROM32KHZ), CLK(NONE), + MASK_BITS_31_29}, + /* CLOCK_TYPE_AC2CC3P_TS2 */ + { CLK(AUDIO), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), + CLK(PERIPH), CLK(NONE), CLK(OSC), CLK(SRC2), + MASK_BITS_31_29}, +}; + +/* + * Clock type for each peripheral clock source. We put the name in each + * record just so it is easy to match things up + */ +#define TYPE(name, type) type +static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = { + /* 0x00 */ + TYPE(PERIPHC_I2S1, CLOCK_TYPE_AXPT), + TYPE(PERIPHC_I2S2, CLOCK_TYPE_AXPT), + TYPE(PERIPHC_SPDIF_OUT, CLOCK_TYPE_AXPT), + TYPE(PERIPHC_SPDIF_IN, CLOCK_TYPE_PC2CC3M), + TYPE(PERIPHC_PWM, CLOCK_TYPE_PC2CC3S_T), + TYPE(PERIPHC_05h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SBC2, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_SBC3, CLOCK_TYPE_PC2CC3M_T), + + /* 0x08 */ + TYPE(PERIPHC_08h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_I2C1, CLOCK_TYPE_PC2CC3M_T16), + TYPE(PERIPHC_I2C5, CLOCK_TYPE_PC2CC3M_T16), + TYPE(PERIPHC_0bh, CLOCK_TYPE_NONE), + TYPE(PERIPHC_0ch, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SBC1, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_DISP1, CLOCK_TYPE_PMDACD2T), + TYPE(PERIPHC_DISP2, CLOCK_TYPE_PMDACD2T), + + /* 0x10 */ + TYPE(PERIPHC_10h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_11h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_VI, CLOCK_TYPE_MC2CC3P_A), + TYPE(PERIPHC_13h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SDMMC1, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_SDMMC2, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_16h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_17h, CLOCK_TYPE_NONE), + + /* 0x18 */ + TYPE(PERIPHC_18h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SDMMC4, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_VFIR, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_1Bh, CLOCK_TYPE_NONE), + TYPE(PERIPHC_1Ch, CLOCK_TYPE_NONE), + TYPE(PERIPHC_HSI, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_UART1, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_UART2, CLOCK_TYPE_PC2CC3M_T), + + /* 0x20 */ + TYPE(PERIPHC_HOST1X, CLOCK_TYPE_MC2CC3P_A), + TYPE(PERIPHC_21h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_22h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_HDMI, CLOCK_TYPE_PMDACD2T), + TYPE(PERIPHC_24h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_25h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_I2C2, CLOCK_TYPE_PC2CC3M_T16), + TYPE(PERIPHC_EMC, CLOCK_TYPE_MCPTM2C2C3), + + /* 0x28 */ + TYPE(PERIPHC_UART3, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_29h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_VI_SENSOR, CLOCK_TYPE_MC2CC3P_A), + TYPE(PERIPHC_2bh, CLOCK_TYPE_NONE), + TYPE(PERIPHC_2ch, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SBC4, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_I2C3, CLOCK_TYPE_PC2CC3M_T16), + TYPE(PERIPHC_SDMMC3, CLOCK_TYPE_PC2CC3M_T), + + /* 0x30 */ + TYPE(PERIPHC_UART4, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_UART5, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_VDE, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_OWR, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_NOR, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_CSITE, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_I2S0, CLOCK_TYPE_AXPT), + TYPE(PERIPHC_DTV, CLOCK_TYPE_NONE), + + /* 0x38 */ + TYPE(PERIPHC_38h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_39h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_3ah, CLOCK_TYPE_NONE), + TYPE(PERIPHC_3bh, CLOCK_TYPE_NONE), + TYPE(PERIPHC_MSENC, CLOCK_TYPE_MC2CC3P_A), + TYPE(PERIPHC_TSEC, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_3eh, CLOCK_TYPE_NONE), + TYPE(PERIPHC_OSC, CLOCK_TYPE_NONE), + + /* 0x40 */ + TYPE(PERIPHC_40h, CLOCK_TYPE_NONE), /* start with 0x3b0 */ + TYPE(PERIPHC_MSELECT, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_TSENSOR, CLOCK_TYPE_PC2CC3T_S), + TYPE(PERIPHC_I2S3, CLOCK_TYPE_AXPT), + TYPE(PERIPHC_I2S4, CLOCK_TYPE_AXPT), + TYPE(PERIPHC_I2C4, CLOCK_TYPE_PC2CC3M_T16), + TYPE(PERIPHC_SBC5, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_SBC6, CLOCK_TYPE_PC2CC3M_T), + + /* 0x48 */ + TYPE(PERIPHC_AUDIO, CLOCK_TYPE_AC2CC3P_TS2), + TYPE(PERIPHC_49h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_DAM0, CLOCK_TYPE_AC2CC3P_TS2), + TYPE(PERIPHC_DAM1, CLOCK_TYPE_AC2CC3P_TS2), + TYPE(PERIPHC_DAM2, CLOCK_TYPE_AC2CC3P_TS2), + TYPE(PERIPHC_HDA2CODEC2X, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_ACTMON, CLOCK_TYPE_PC2CC3S_T), + TYPE(PERIPHC_EXTPERIPH1, CLOCK_TYPE_ASPTE), + + /* 0x50 */ + TYPE(PERIPHC_EXTPERIPH2, CLOCK_TYPE_ASPTE), + TYPE(PERIPHC_EXTPERIPH3, CLOCK_TYPE_ASPTE), + TYPE(PERIPHC_52h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_I2CSLOW, CLOCK_TYPE_PC2CC3S_T), + TYPE(PERIPHC_SYS, CLOCK_TYPE_NONE), + TYPE(PERIPHC_55h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_56h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_57h, CLOCK_TYPE_NONE), + + /* 0x58 */ + TYPE(PERIPHC_58h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_59h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_5ah, CLOCK_TYPE_NONE), + TYPE(PERIPHC_5bh, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SATAOOB, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_SATA, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_HDA, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_5fh, CLOCK_TYPE_NONE), + + /* 0x60 */ + TYPE(PERIPHC_XUSB_CORE_HOST, CLOCK_TYPE_NONE), + TYPE(PERIPHC_XUSB_FALCON, CLOCK_TYPE_NONE), + TYPE(PERIPHC_XUSB_FS, CLOCK_TYPE_NONE), + TYPE(PERIPHC_XUSB_CORE_DEV, CLOCK_TYPE_NONE), + TYPE(PERIPHC_XUSB_SS, CLOCK_TYPE_NONE), + TYPE(PERIPHC_CILAB, CLOCK_TYPE_NONE), + TYPE(PERIPHC_CILCD, CLOCK_TYPE_NONE), + TYPE(PERIPHC_CILE, CLOCK_TYPE_NONE), + + /* 0x68 */ + TYPE(PERIPHC_DSIA_LP, CLOCK_TYPE_NONE), + TYPE(PERIPHC_DSIB_LP, CLOCK_TYPE_NONE), + TYPE(PERIPHC_ENTROPY, CLOCK_TYPE_NONE), + TYPE(PERIPHC_DVFS_REF, CLOCK_TYPE_NONE), + TYPE(PERIPHC_DVFS_SOC, CLOCK_TYPE_NONE), + TYPE(PERIPHC_TRACECLKIN, CLOCK_TYPE_NONE), + TYPE(PERIPHC_ADX0, CLOCK_TYPE_NONE), + TYPE(PERIPHC_AMX0, CLOCK_TYPE_NONE), + + /* 0x70 */ + TYPE(PERIPHC_EMC_LATENCY, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SOC_THERM, CLOCK_TYPE_NONE), + TYPE(PERIPHC_72h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_73h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_74h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_75h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_VI_SENSOR2, CLOCK_TYPE_NONE), + TYPE(PERIPHC_I2C6, CLOCK_TYPE_PC2CC3M_T16), + + /* 0x78 */ + TYPE(PERIPHC_78h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_EMC_DLL, CLOCK_TYPE_MCPTM2C2C3), + TYPE(PERIPHC_HDMI_AUDIO, CLOCK_TYPE_NONE), + TYPE(PERIPHC_CLK72MHZ, CLOCK_TYPE_NONE), + TYPE(PERIPHC_ADX1, CLOCK_TYPE_AC2CC3P_TS2), + TYPE(PERIPHC_AMX1, CLOCK_TYPE_AC2CC3P_TS2), + TYPE(PERIPHC_VIC, CLOCK_TYPE_NONE), + TYPE(PERIPHC_7Fh, CLOCK_TYPE_NONE), +}; + +/* + * This array translates a periph_id to a periphc_internal_id + * + * Not present/matched up: + * uint vi_sensor; _VI_SENSOR_0, 0x1A8 + * SPDIF - which is both 0x08 and 0x0c + * + */ +#define NONE(name) (-1) +#define OFFSET(name, value) PERIPHC_ ## name +static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = { + /* Low word: 31:0 */ + NONE(CPU), + NONE(COP), + NONE(TRIGSYS), + NONE(ISPB), + NONE(RESERVED4), + NONE(TMR), + PERIPHC_UART1, + PERIPHC_UART2, /* and vfir 0x68 */ + + /* 8 */ + NONE(GPIO), + PERIPHC_SDMMC2, + PERIPHC_SPDIF_IN, + PERIPHC_I2S1, + PERIPHC_I2C1, + NONE(RESERVED13), + PERIPHC_SDMMC1, + PERIPHC_SDMMC4, + + /* 16 */ + NONE(TCW), + PERIPHC_PWM, + PERIPHC_I2S2, + NONE(RESERVED19), + PERIPHC_VI, + NONE(RESERVED21), + NONE(USBD), + NONE(ISP), + + /* 24 */ + NONE(RESERVED24), + NONE(RESERVED25), + PERIPHC_DISP2, + PERIPHC_DISP1, + PERIPHC_HOST1X, + NONE(VCP), + PERIPHC_I2S0, + NONE(CACHE2), + + /* Middle word: 63:32 */ + NONE(MEM), + NONE(AHBDMA), + NONE(APBDMA), + NONE(RESERVED35), + NONE(RESERVED36), + NONE(STAT_MON), + NONE(RESERVED38), + NONE(FUSE), + + /* 40 */ + NONE(KFUSE), + PERIPHC_SBC1, /* SBCx = SPIx */ + PERIPHC_NOR, + NONE(RESERVED43), + PERIPHC_SBC2, + NONE(XIO), + PERIPHC_SBC3, + PERIPHC_I2C5, + + /* 48 */ + NONE(DSI), + NONE(RESERVED49), + PERIPHC_HSI, + PERIPHC_HDMI, + NONE(CSI), + NONE(RESERVED53), + PERIPHC_I2C2, + PERIPHC_UART3, + + /* 56 */ + NONE(MIPI_CAL), + PERIPHC_EMC, + NONE(USB2), + NONE(USB3), + NONE(RESERVED60), + PERIPHC_VDE, + NONE(BSEA), + NONE(BSEV), + + /* Upper word 95:64 */ + NONE(RESERVED64), + PERIPHC_UART4, + PERIPHC_UART5, + PERIPHC_I2C3, + PERIPHC_SBC4, + PERIPHC_SDMMC3, + NONE(PCIE), + PERIPHC_OWR, + + /* 72 */ + NONE(AFI), + PERIPHC_CSITE, + NONE(PCIEXCLK), + NONE(AVPUCQ), + NONE(LA), + NONE(TRACECLKIN), + NONE(SOC_THERM), + NONE(DTV), + + /* 80 */ + NONE(RESERVED80), + PERIPHC_I2CSLOW, + NONE(DSIB), + PERIPHC_TSEC, + NONE(RESERVED84), + NONE(RESERVED85), + NONE(RESERVED86), + NONE(EMUCIF), + + /* 88 */ + NONE(RESERVED88), + NONE(XUSB_HOST), + NONE(RESERVED90), + PERIPHC_MSENC, + NONE(RESERVED92), + NONE(RESERVED93), + NONE(RESERVED94), + NONE(XUSB_DEV), + + /* V word: 31:0 */ + NONE(CPUG), + NONE(CPULP), + NONE(V_RESERVED2), + PERIPHC_MSELECT, + NONE(V_RESERVED4), + PERIPHC_I2S3, + PERIPHC_I2S4, + PERIPHC_I2C4, + + /* 104 */ + PERIPHC_SBC5, + PERIPHC_SBC6, + PERIPHC_AUDIO, + NONE(APBIF), + PERIPHC_DAM0, + PERIPHC_DAM1, + PERIPHC_DAM2, + PERIPHC_HDA2CODEC2X, + + /* 112 */ + NONE(ATOMICS), + NONE(V_RESERVED17), + NONE(V_RESERVED18), + NONE(V_RESERVED19), + NONE(V_RESERVED20), + NONE(V_RESERVED21), + NONE(V_RESERVED22), + PERIPHC_ACTMON, + + /* 120 */ + NONE(EXTPERIPH1), + NONE(EXTPERIPH2), + NONE(EXTPERIPH3), + NONE(OOB), + PERIPHC_SATA, + PERIPHC_HDA, + NONE(TZRAM), + NONE(SE), + + /* W word: 31:0 */ + NONE(HDA2HDMICODEC), + NONE(SATACOLD), + NONE(W_RESERVED2), + NONE(W_RESERVED3), + NONE(W_RESERVED4), + NONE(W_RESERVED5), + NONE(W_RESERVED6), + NONE(W_RESERVED7), + + /* 136 */ + NONE(CEC), + NONE(W_RESERVED9), + NONE(W_RESERVED10), + NONE(W_RESERVED11), + NONE(W_RESERVED12), + NONE(W_RESERVED13), + NONE(XUSB_PADCTL), + NONE(W_RESERVED15), + + /* 144 */ + NONE(W_RESERVED16), + NONE(W_RESERVED17), + NONE(W_RESERVED18), + NONE(W_RESERVED19), + NONE(W_RESERVED20), + NONE(ENTROPY), + NONE(DDS), + NONE(W_RESERVED23), + + /* 152 */ + NONE(DP2), + NONE(AMX0), + NONE(ADX0), + NONE(DVFS), + NONE(XUSB_SS), + NONE(W_RESERVED29), + NONE(W_RESERVED30), + NONE(W_RESERVED31), + + /* X word: 31:0 */ + NONE(SPARE), + NONE(X_RESERVED1), + NONE(X_RESERVED2), + NONE(X_RESERVED3), + NONE(CAM_MCLK), + NONE(CAM_MCLK2), + PERIPHC_I2C6, + NONE(X_RESERVED7), + + /* 168 */ + NONE(X_RESERVED8), + NONE(X_RESERVED9), + NONE(X_RESERVED10), + NONE(VIM2_CLK), + NONE(X_RESERVED12), + NONE(X_RESERVED13), + NONE(EMC_DLL), + NONE(X_RESERVED15), + + /* 176 */ + NONE(HDMI_AUDIO), + NONE(CLK72MHZ), + NONE(VIC), + NONE(X_RESERVED19), + NONE(ADX1), + NONE(DPAUX), + NONE(SOR0), + NONE(X_RESERVED23), + + /* 184 */ + NONE(GPU), + NONE(AMX1), + NONE(X_RESERVED26), + NONE(X_RESERVED27), + NONE(X_RESERVED28), + NONE(X_RESERVED29), + NONE(X_RESERVED30), + NONE(X_RESERVED31), +}; + +/* + * Get the oscillator frequency, from the corresponding hardware configuration + * field. Note that Tegra30+ support 3 new higher freqs, but we map back + * to the old T20 freqs. Support for the higher oscillators is TBD. + */ +enum clock_osc_freq clock_get_osc_freq(void) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 reg; + + reg = readl(&clkrst->crc_osc_ctrl); + reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT; + + if (reg & 1) /* one of the newer freqs */ + printf("Warning: OSC_FREQ is unsupported! (%d)\n", reg); + + return reg >> 2; /* Map to most common (T20) freqs */ +} + +/* Returns a pointer to the clock source register for a peripheral */ +u32 *get_periph_source_reg(enum periph_id periph_id) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + enum periphc_internal_id internal_id; + + /* Coresight is a special case */ + if (periph_id == PERIPH_ID_CSI) + return &clkrst->crc_clk_src[PERIPH_ID_CSI+1]; + + assert(periph_id >= PERIPH_ID_FIRST && periph_id < PERIPH_ID_COUNT); + internal_id = periph_id_to_internal_id[periph_id]; + assert(internal_id != -1); + if (internal_id >= PERIPHC_VW_FIRST) { + internal_id -= PERIPHC_VW_FIRST; + return &clkrst->crc_clk_src_vw[internal_id]; + } else { + return &clkrst->crc_clk_src[internal_id]; + } +} + +/** + * Given a peripheral ID and the required source clock, this returns which + * value should be programmed into the source mux for that peripheral. + * + * There is special code here to handle the one source type with 5 sources. + * + * @param periph_id peripheral to start + * @param source PLL id of required parent clock + * @param mux_bits Set to number of bits in mux register: 2 or 4 + * @param divider_bits Set to number of divider bits (8 or 16) + * @return mux value (0-4, or -1 if not found) + */ +int get_periph_clock_source(enum periph_id periph_id, + enum clock_id parent, int *mux_bits, int *divider_bits) +{ + enum clock_type_id type; + enum periphc_internal_id internal_id; + int mux; + + assert(clock_periph_id_isvalid(periph_id)); + + internal_id = periph_id_to_internal_id[periph_id]; + assert(periphc_internal_id_isvalid(internal_id)); + + type = clock_periph_type[internal_id]; + assert(clock_type_id_isvalid(type)); + + *mux_bits = clock_source[type][CLOCK_MAX_MUX]; + + if (type == CLOCK_TYPE_PC2CC3M_T16) + *divider_bits = 16; + else + *divider_bits = 8; + + for (mux = 0; mux < CLOCK_MAX_MUX; mux++) + if (clock_source[type][mux] == parent) + return mux; + + /* if we get here, either us or the caller has made a mistake */ + printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id, + parent); + return -1; +} + +void clock_set_enable(enum periph_id periph_id, int enable) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 *clk; + u32 reg; + + /* Enable/disable the clock to this peripheral */ + assert(clock_periph_id_isvalid(periph_id)); + if ((int)periph_id < (int)PERIPH_ID_VW_FIRST) + clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)]; + else + clk = &clkrst->crc_clk_out_enb_vw[PERIPH_REG(periph_id)]; + reg = readl(clk); + if (enable) + reg |= PERIPH_MASK(periph_id); + else + reg &= ~PERIPH_MASK(periph_id); + writel(reg, clk); +} + +void reset_set_enable(enum periph_id periph_id, int enable) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 *reset; + u32 reg; + + /* Enable/disable reset to the peripheral */ + assert(clock_periph_id_isvalid(periph_id)); + if (periph_id < PERIPH_ID_VW_FIRST) + reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)]; + else + reset = &clkrst->crc_rst_dev_vw[PERIPH_REG(periph_id)]; + reg = readl(reset); + if (enable) + reg |= PERIPH_MASK(periph_id); + else + reg &= ~PERIPH_MASK(periph_id); + writel(reg, reset); +} + +#ifdef CONFIG_OF_CONTROL +/* + * Convert a device tree clock ID to our peripheral ID. They are mostly + * the same but we are very cautious so we check that a valid clock ID is + * provided. + * + * @param clk_id Clock ID according to tegra124 device tree binding + * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid + */ +enum periph_id clk_id_to_periph_id(int clk_id) +{ + if (clk_id > PERIPH_ID_COUNT) + return PERIPH_ID_NONE; + + switch (clk_id) { + case PERIPH_ID_RESERVED4: + case PERIPH_ID_RESERVED25: + case PERIPH_ID_RESERVED35: + case PERIPH_ID_RESERVED36: + case PERIPH_ID_RESERVED38: + case PERIPH_ID_RESERVED43: + case PERIPH_ID_RESERVED49: + case PERIPH_ID_RESERVED53: + case PERIPH_ID_RESERVED64: + case PERIPH_ID_RESERVED84: + case PERIPH_ID_RESERVED85: + case PERIPH_ID_RESERVED86: + case PERIPH_ID_RESERVED88: + case PERIPH_ID_RESERVED90: + case PERIPH_ID_RESERVED92: + case PERIPH_ID_RESERVED93: + case PERIPH_ID_RESERVED94: + case PERIPH_ID_V_RESERVED2: + case PERIPH_ID_V_RESERVED4: + case PERIPH_ID_V_RESERVED17: + case PERIPH_ID_V_RESERVED18: + case PERIPH_ID_V_RESERVED19: + case PERIPH_ID_V_RESERVED20: + case PERIPH_ID_V_RESERVED21: + case PERIPH_ID_V_RESERVED22: + case PERIPH_ID_W_RESERVED2: + case PERIPH_ID_W_RESERVED3: + case PERIPH_ID_W_RESERVED4: + case PERIPH_ID_W_RESERVED5: + case PERIPH_ID_W_RESERVED6: + case PERIPH_ID_W_RESERVED7: + case PERIPH_ID_W_RESERVED9: + case PERIPH_ID_W_RESERVED10: + case PERIPH_ID_W_RESERVED11: + case PERIPH_ID_W_RESERVED12: + case PERIPH_ID_W_RESERVED13: + case PERIPH_ID_W_RESERVED15: + case PERIPH_ID_W_RESERVED16: + case PERIPH_ID_W_RESERVED17: + case PERIPH_ID_W_RESERVED18: + case PERIPH_ID_W_RESERVED19: + case PERIPH_ID_W_RESERVED20: + case PERIPH_ID_W_RESERVED23: + case PERIPH_ID_W_RESERVED29: + case PERIPH_ID_W_RESERVED30: + case PERIPH_ID_W_RESERVED31: + return PERIPH_ID_NONE; + default: + return clk_id; + } +} +#endif /* CONFIG_OF_CONTROL */ + +void clock_early_init(void) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + + tegra30_set_up_pllp(); + + /* + * PLLC output frequency set to 600Mhz + * PLLD output frequency set to 925Mhz + */ + switch (clock_get_osc_freq()) { + case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */ + clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8); + clock_set_rate(CLOCK_ID_DISPLAY, 925, 12, 0, 12); + break; + + case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */ + clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8); + clock_set_rate(CLOCK_ID_DISPLAY, 925, 26, 0, 12); + break; + + case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */ + clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8); + clock_set_rate(CLOCK_ID_DISPLAY, 925, 13, 0, 12); + break; + case CLOCK_OSC_FREQ_19_2: + default: + /* + * These are not supported. It is too early to print a + * message and the UART likely won't work anyway due to the + * oscillator being wrong. + */ + break; + } + + /* PLLC_MISC2: Set dynramp_stepA/B. MISC2 maps to pll_out[1] */ + writel(0x00561600, &clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_out[1]); + + /* PLLC_MISC: Set LOCK_ENABLE */ + writel(0x01000000, &clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc); + udelay(2); + + /* PLLD_MISC: Set CLKENABLE, CPCON 12, LFCON 1 */ + writel(0x40000C10, &clkrst->crc_pll[CLOCK_ID_DISPLAY].pll_misc); + udelay(2); +} + +void arch_timer_init(void) +{ + struct sysctr_ctlr *sysctr = (struct sysctr_ctlr *)NV_PA_TSC_BASE; + u32 freq, val; + + freq = clock_get_rate(CLOCK_ID_OSC); + debug("%s: osc freq is %dHz [0x%08X]\n", __func__, freq, freq); + + /* ARM CNTFRQ */ + asm("mcr p15, 0, %0, c14, c0, 0\n" : : "r" (freq)); + + /* Only Tegra114+ has the System Counter regs */ + debug("%s: setting CNTFID0 to 0x%08X\n", __func__, freq); + writel(freq, &sysctr->cntfid0); + + val = readl(&sysctr->cntcr); + val |= TSC_CNTCR_ENABLE | TSC_CNTCR_HDBG; + writel(val, &sysctr->cntcr); + debug("%s: TSC CNTCR = 0x%08X\n", __func__, val); +} diff --git a/arch/arm/cpu/tegra124-common/funcmux.c b/arch/arm/cpu/tegra124-common/funcmux.c new file mode 100644 index 0000000..d19fda0 --- /dev/null +++ b/arch/arm/cpu/tegra124-common/funcmux.c @@ -0,0 +1,69 @@ +/* + * (C) Copyright 2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* Tegra124 high-level function multiplexing */ + +#include <common.h> +#include <asm/arch/clock.h> +#include <asm/arch/funcmux.h> +#include <asm/arch/pinmux.h> + +int funcmux_select(enum periph_id id, int config) +{ + int bad_config = config != FUNCMUX_DEFAULT; + + switch (id) { + case PERIPH_ID_UART4: + switch (config) { + case FUNCMUX_UART4_GPIO: /* TXD,RXD,CTS,RTS */ + pinmux_set_func(PINGRP_GPIO_PJ7, PMUX_FUNC_UARTD); + pinmux_set_func(PINGRP_GPIO_PB0, PMUX_FUNC_UARTD); + pinmux_set_func(PINGRP_GPIO_PB1, PMUX_FUNC_UARTD); + pinmux_set_func(PINGRP_GPIO_PK7, PMUX_FUNC_UARTD); + + pinmux_set_io(PINGRP_GPIO_PJ7, PMUX_PIN_OUTPUT); + pinmux_set_io(PINGRP_GPIO_PB0, PMUX_PIN_INPUT); + pinmux_set_io(PINGRP_GPIO_PB1, PMUX_PIN_INPUT); + pinmux_set_io(PINGRP_GPIO_PK7, PMUX_PIN_OUTPUT); + + pinmux_tristate_disable(PINGRP_GPIO_PJ7); + pinmux_tristate_disable(PINGRP_GPIO_PB0); + pinmux_tristate_disable(PINGRP_GPIO_PB1); + pinmux_tristate_disable(PINGRP_GPIO_PK7); + break; + } + break; + + case PERIPH_ID_UART1: + switch (config) { + case FUNCMUX_UART1_KBC: + pinmux_set_func(PINGRP_KB_ROW9, PMUX_FUNC_UARTA); + pinmux_set_func(PINGRP_KB_ROW10, PMUX_FUNC_UARTA); + + pinmux_set_io(PINGRP_KB_ROW9, PMUX_PIN_OUTPUT); + pinmux_set_io(PINGRP_KB_ROW10, PMUX_PIN_INPUT); + + pinmux_tristate_disable(PINGRP_KB_ROW9); + pinmux_tristate_disable(PINGRP_KB_ROW10); + break; + } + break; + + /* Add other periph IDs here as needed */ + + default: + debug("%s: invalid periph_id %d", __func__, id); + return -1; + } + + if (bad_config) { + debug("%s: invalid config %d for periph_id %d", __func__, + config, id); + return -1; + } + return 0; +} diff --git a/arch/arm/cpu/tegra124-common/pinmux.c b/arch/arm/cpu/tegra124-common/pinmux.c new file mode 100644 index 0000000..a4ab4ea --- /dev/null +++ b/arch/arm/cpu/tegra124-common/pinmux.c @@ -0,0 +1,730 @@ +/* + * (C) Copyright 2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* Tegra124 pin multiplexing functions */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/tegra.h> +#include <asm/arch/pinmux.h> + +struct tegra_pingroup_desc { + const char *name; + enum pmux_func funcs[4]; + enum pmux_func func_safe; + enum pmux_vddio vddio; + enum pmux_pin_io io; +}; + +#define PMUX_MUXCTL_SHIFT 0 +#define PMUX_PULL_SHIFT 2 +#define PMUX_TRISTATE_SHIFT 4 +#define PMUX_TRISTATE_MASK (1 << PMUX_TRISTATE_SHIFT) +#define PMUX_IO_SHIFT 5 +#define PMUX_OD_SHIFT 6 +#define PMUX_LOCK_SHIFT 7 +#define PMUX_IO_RESET_SHIFT 8 +#define PMUX_RCV_SEL_SHIFT 9 + +#define PGRP_HSM_SHIFT 2 +#define PGRP_SCHMT_SHIFT 3 +#define PGRP_LPMD_SHIFT 4 +#define PGRP_LPMD_MASK (3 << PGRP_LPMD_SHIFT) +#define PGRP_DRVDN_SHIFT 12 +#define PGRP_DRVDN_MASK (0x7F << PGRP_DRVDN_SHIFT) +#define PGRP_DRVUP_SHIFT 20 +#define PGRP_DRVUP_MASK (0x7F << PGRP_DRVUP_SHIFT) +#define PGRP_SLWR_SHIFT 28 +#define PGRP_SLWR_MASK (3 << PGRP_SLWR_SHIFT) +#define PGRP_SLWF_SHIFT 30 +#define PGRP_SLWF_MASK (3 << PGRP_SLWF_SHIFT) + +/* Convenient macro for defining pin group properties */ +#define PIN(pg_name, vdd, f0, f1, f2, f3, iod) \ + { \ + .vddio = PMUX_VDDIO_ ## vdd, \ + .funcs = { \ + PMUX_FUNC_ ## f0, \ + PMUX_FUNC_ ## f1, \ + PMUX_FUNC_ ## f2, \ + PMUX_FUNC_ ## f3, \ + }, \ + .func_safe = PMUX_FUNC_RSVD1, \ + .io = PMUX_PIN_ ## iod, \ + } + +/* Input and output pins */ +#define PINI(pg_name, vdd, f0, f1, f2, f3) \ + PIN(pg_name, vdd, f0, f1, f2, f3, INPUT) +#define PINO(pg_name, vdd, f0, f1, f2, f3) \ + PIN(pg_name, vdd, f0, f1, f2, f3, OUTPUT) + +/* A pin group number which is not used */ +#define PIN_RESERVED \ + PIN(NONE, NONE, INVALID, INVALID, INVALID, INVALID, NONE) + +const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = { + /* NAME VDD f0 f1 f2 f3 */ + PINI(ULPI_DATA0, BB, SPI3, HSI, UARTA, ULPI), + PINI(ULPI_DATA1, BB, SPI3, HSI, UARTA, ULPI), + PINI(ULPI_DATA2, BB, SPI3, HSI, UARTA, ULPI), + PINI(ULPI_DATA3, BB, SPI3, HSI, UARTA, ULPI), + PINI(ULPI_DATA4, BB, SPI2, HSI, UARTA, ULPI), + PINI(ULPI_DATA5, BB, SPI2, HSI, UARTA, ULPI), + PINI(ULPI_DATA6, BB, SPI2, HSI, UARTA, ULPI), + PINI(ULPI_DATA7, BB, SPI2, HSI, UARTA, ULPI), + PINI(ULPI_CLK, BB, SPI1, SPI5, UARTD, ULPI), + PINI(ULPI_DIR, BB, SPI1, SPI5, UARTD, ULPI), + PINI(ULPI_NXT, BB, SPI1, SPI5, UARTD, ULPI), + PINI(ULPI_STP, BB, SPI1, SPI5, UARTD, ULPI), + PINI(DAP3_FS, BB, I2S2, SPI5, DISPA, DISPB), + PINI(DAP3_DIN, BB, I2S2, SPI5, DISPA, DISPB), + PINI(DAP3_DOUT, BB, I2S2, SPI5, DISPA, DISPB), + PINI(DAP3_SCLK, BB, I2S2, SPI5, DISPA, DISPB), + PINI(GPIO_PV0, BB, USB, RSVD2, RSVD3, RSVD4), + PINI(GPIO_PV1, BB, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(SDMMC1_CLK, SDMMC1, SDMMC1, CLK12, RSVD3, RSVD4), + PINI(SDMMC1_CMD, SDMMC1, SDMMC1, SPDIF, SPI4, UARTA), + PINI(SDMMC1_DAT3, SDMMC1, SDMMC1, SPDIF, SPI4, UARTA), + PINI(SDMMC1_DAT2, SDMMC1, SDMMC1, PWM0, SPI4, UARTA), + PINI(SDMMC1_DAT1, SDMMC1, SDMMC1, PWM1, SPI4, UARTA), + PINI(SDMMC1_DAT0, SDMMC1, SDMMC1, RSVD2, SPI4, UARTA), + PIN_RESERVED, /* Reserved: 0x3060 - 0x3064 */ + PIN_RESERVED, + PINI(CLK2_OUT, SDMMC1, EXTPERIPH2, RSVD2, RSVD3, RSVD4), + PINI(CLK2_REQ, SDMMC1, DAP, RSVD2, RSVD3, RSVD4), + PIN_RESERVED, /* Reserved: 0x3070 - 0x310c */ + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PINI(HDMI_INT, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(DDC_SCL, LCD, I2C4, RSVD2, RSVD3, RSVD4), + PINI(DDC_SDA, LCD, I2C4, RSVD2, RSVD3, RSVD4), + PIN_RESERVED, /* Reserved: 0x311c - 0x3160 */ + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PINI(UART2_RXD, UART, UARTB, SPDIF, UARTA, SPI4), + PINI(UART2_TXD, UART, UARTB, SPDIF, UARTA, SPI4), + PINI(UART2_RTS_N, UART, UARTA, UARTB, RSVD3, SPI4), + PINI(UART2_CTS_N, UART, UARTA, UARTB, RSVD3, SPI4), + PINI(UART3_TXD, UART, UARTC, RSVD2, RSVD3, SPI4), + PINI(UART3_RXD, UART, UARTC, RSVD2, RSVD3, SPI4), + PINI(UART3_CTS_N, UART, UARTC, SDMMC1, DTV, SPI4), + PINI(UART3_RTS_N, UART, UARTC, PWM0, DTV, DISPA), + PINI(GPIO_PU0, UART, OWR, UARTA, RSVD3, RSVD4), + PINI(GPIO_PU1, UART, RSVD1, UARTA, RSVD3, RSVD4), + PINI(GPIO_PU2, UART, RSVD1, UARTA, RSVD3, RSVD4), + PINI(GPIO_PU3, UART, PWM0, UARTA, DISPA, DISPB), + PINI(GPIO_PU4, UART, PWM1, UARTA, DISPA, DISPB), + PINI(GPIO_PU5, UART, PWM2, UARTA, DISPA, DISPB), + PINI(GPIO_PU6, UART, PWM3, UARTA, USB, DISPB), + PINI(GEN1_I2C_SDA, UART, I2C1, RSVD2, RSVD3, RSVD4), + PINI(GEN1_I2C_SCL, UART, I2C1, RSVD2, RSVD3, RSVD4), + PINI(DAP4_FS, UART, I2S3, RSVD2, DTV, RSVD4), + PINI(DAP4_DIN, UART, I2S3, RSVD2, RSVD3, RSVD4), + PINI(DAP4_DOUT, UART, I2S3, RSVD2, DTV, RSVD4), + PINI(DAP4_SCLK, UART, I2S3, RSVD2, RSVD3, RSVD4), + PINI(CLK3_OUT, UART, EXTPERIPH3, RSVD2, RSVD3, RSVD4), + PINI(CLK3_REQ, UART, DEV3, RSVD2, RSVD3, RSVD4), + PINI(GMI_WP_N, GMI, RSVD1, NAND, GMI, GMI_ALT), + PINI(GMI_IORDY, GMI, SDMMC2, RSVD2, GMI, TRACE), + PINI(GMI_WAIT, GMI, SPI4, NAND, GMI, DTV), + PINI(GMI_ADV_N, GMI, RSVD1, NAND, GMI, TRACE), + PINI(GMI_CLK, GMI, SDMMC2, NAND, GMI, TRACE), + PINI(GMI_CS0_N, GMI, RSVD1, NAND, GMI, USB), + PINI(GMI_CS1_N, GMI, RSVD1, NAND, GMI, SOC), + PINI(GMI_CS2_N, GMI, SDMMC2, NAND, GMI, TRACE), + PINI(GMI_CS3_N, GMI, SDMMC2, NAND, GMI, GMI_ALT), + PINI(GMI_CS4_N, GMI, USB, NAND, GMI, TRACE), + PINI(GMI_CS6_N, GMI, NAND, NAND_ALT, GMI, SPI4), + PINI(GMI_CS7_N, GMI, NAND, NAND_ALT, GMI, SDMMC2), + PINI(GMI_AD0, GMI, RSVD1, NAND, GMI, RSVD4), + PINI(GMI_AD1, GMI, RSVD1, NAND, GMI, RSVD4), + PINI(GMI_AD2, GMI, RSVD1, NAND, GMI, RSVD4), + PINI(GMI_AD3, GMI, RSVD1, NAND, GMI, RSVD4), + PINI(GMI_AD4, GMI, RSVD1, NAND, GMI, RSVD4), + PINI(GMI_AD5, GMI, RSVD1, NAND, GMI, SPI4), + PINI(GMI_AD6, GMI, RSVD1, NAND, GMI, SPI4), + PINI(GMI_AD7, GMI, RSVD1, NAND, GMI, SPI4), + PINI(GMI_AD8, GMI, PWM0, NAND, GMI, DTV), + PINI(GMI_AD9, GMI, PWM1, NAND, GMI, CLDVFS), + PINI(GMI_AD10, GMI, PWM2, NAND, GMI, CLDVFS), + PINI(GMI_AD11, GMI, PWM3, NAND, GMI, USB), + PINI(GMI_AD12, GMI, SDMMC2, NAND, GMI, RSVD4), + PINI(GMI_AD13, GMI, SDMMC2, NAND, GMI, RSVD4), + PINI(GMI_AD14, GMI, SDMMC2, NAND, GMI, DTV), + PINI(GMI_AD15, GMI, SDMMC2, NAND, GMI, DTV), + PINI(GMI_A16, GMI, UARTD, TRACE, GMI, GMI_ALT), + PINI(GMI_A17, GMI, UARTD, RSVD2, GMI, TRACE), + PINI(GMI_A18, GMI, UARTD, RSVD2, GMI, TRACE), + PINI(GMI_A19, GMI, UARTD, SPI4, GMI, TRACE), + PINI(GMI_WR_N, GMI, RSVD1, NAND, GMI, SPI4), + PINI(GMI_OE_N, GMI, RSVD1, NAND, GMI, SOC), + PINI(GMI_DQS, GMI, SDMMC2, NAND, GMI, TRACE), + PINI(GMI_RST_N, GMI, NAND, NAND_ALT, GMI, RSVD4), + PINI(GEN2_I2C_SCL, GMI, I2C2, RSVD2, GMI, RSVD4), + PINI(GEN2_I2C_SDA, GMI, I2C2, RSVD2, GMI, RSVD4), + PINI(SDMMC4_CLK, SDMMC4, SDMMC4, RSVD2, GMI, RSVD4), + PINI(SDMMC4_CMD, SDMMC4, SDMMC4, RSVD2, GMI, RSVD4), + PINI(SDMMC4_DAT0, SDMMC4, SDMMC4, SPI3, GMI, RSVD4), + PINI(SDMMC4_DAT1, SDMMC4, SDMMC4, SPI3, GMI, RSVD4), + PINI(SDMMC4_DAT2, SDMMC4, SDMMC4, SPI3, GMI, RSVD4), + PINI(SDMMC4_DAT3, SDMMC4, SDMMC4, SPI3, GMI, RSVD4), + PINI(SDMMC4_DAT4, SDMMC4, SDMMC4, SPI3, GMI, RSVD4), + PINI(SDMMC4_DAT5, SDMMC4, SDMMC4, SPI3, GMI, RSVD4), + PINI(SDMMC4_DAT6, SDMMC4, SDMMC4, SPI3, GMI, RSVD4), + PINI(SDMMC4_DAT7, SDMMC4, SDMMC4, RSVD2, GMI, RSVD4), + PIN_RESERVED, /* Reserved: 0x3280 */ + PINI(CAM_MCLK, CAM, VI, VI_ALT1, VI_ALT3, RSVD4), + PINI(GPIO_PCC1, CAM, I2S4, RSVD2, RSVD3, RSVD4), + PINI(GPIO_PBB0, CAM, I2S4, VI, VI_ALT1, VI_ALT3), + PINI(CAM_I2C_SCL, CAM, VGP1, I2C3, RSVD3, RSVD4), + PINI(CAM_I2C_SDA, CAM, VGP2, I2C3, RSVD3, RSVD4), + PINI(GPIO_PBB3, CAM, VGP3, DISPA, DISPB, RSVD4), + PINI(GPIO_PBB4, CAM, VGP4, DISPA, DISPB, RSVD4), + PINI(GPIO_PBB5, CAM, VGP5, DISPA, DISPB, RSVD4), + PINI(GPIO_PBB6, CAM, VGP6, DISPA, DISPB, RSVD4), + PINI(GPIO_PBB7, CAM, I2S4, RSVD2, RSVD3, RSVD4), + PINI(GPIO_PCC2, CAM, I2S4, RSVD2, RSVD3, RSVD4), + PINI(JTAG_RTCK, SYS, RTCK, RSVD2, RSVD3, RSVD4), + PINI(PWR_I2C_SCL, SYS, I2CPWR, RSVD2, RSVD3, RSVD4), + PINI(PWR_I2C_SDA, SYS, I2CPWR, RSVD2, RSVD3, RSVD4), + PINI(KB_ROW0, SYS, KBC, RSVD2, DTV, RSVD4), + PINI(KB_ROW1, SYS, KBC, RSVD2, DTV, RSVD4), + PINI(KB_ROW2, SYS, KBC, RSVD2, DTV, SOC), + PINI(KB_ROW3, SYS, KBC, DISPA, RSVD3, DISPB), + PINI(KB_ROW4, SYS, KBC, DISPA, SPI2, DISPB), + PINI(KB_ROW5, SYS, KBC, DISPA, SPI2, DISPB), + PINI(KB_ROW6, SYS, KBC, DISPA, RSVD3, DISPB), + PINI(KB_ROW7, SYS, KBC, RSVD2, CLDVFS, UARTA), + PINI(KB_ROW8, SYS, KBC, RSVD2, RSVD3, UARTA), + PINI(KB_ROW9, SYS, KBC, RSVD2, RSVD3, UARTA), + PINI(KB_ROW10, SYS, KBC, RSVD2, RSVD3, UARTA), + PIN_RESERVED, /* Reserved: 0x32e8 - 0x32f8 */ + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PINI(KB_COL0, SYS, KBC, USB, SPI2, EMC_DLL), + PINI(KB_COL1, SYS, KBC, RSVD2, SPI2, EMC_DLL), + PINI(KB_COL2, SYS, KBC, RSVD2, SPI2, RSVD4), + PINI(KB_COL3, SYS, KBC, DISPA, PWM2, UARTA), + PINI(KB_COL4, SYS, KBC, OWR, SDMMC3, UARTA), + PINI(KB_COL5, SYS, KBC, RSVD2, SDMMC1, RSVD4), + PINI(KB_COL6, SYS, KBC, RSVD2, SPI2, RSVD4), + PINI(KB_COL7, SYS, KBC, RSVD2, SPI2, RSVD4), + PINI(CLK_32K_OUT, SYS, BLINK, SOC, RSVD3, RSVD4), + PINI(SYS_CLK_REQ, SYS, SYSCLK, RSVD2, RSVD3, RSVD4), + PINI(CORE_PWR_REQ, SYS, PWRON, RSVD2, RSVD3, RSVD4), + PINI(CPU_PWR_REQ, SYS, CPU, RSVD2, RSVD3, RSVD4), + PINI(PWR_INT_N, SYS, PMI, RSVD2, RSVD3, RSVD4), + PINI(CLK_32K_IN, SYS, CLK, RSVD2, RSVD3, RSVD4), + PINI(OWR, SYS, OWR, RSVD2, RSVD3, RSVD4), + PINI(DAP1_FS, AUDIO, I2S0, HDA, GMI, RSVD4), + PINI(DAP1_DIN, AUDIO, I2S0, HDA, GMI, RSVD4), + PINI(DAP1_DOUT, AUDIO, I2S0, HDA, GMI, RSVD4), + PINI(DAP1_SCLK, AUDIO, I2S0, HDA, GMI, RSVD4), + PINI(CLK1_REQ, AUDIO, DAP, DAP1, RSVD3, RSVD4), + PINI(CLK1_OUT, AUDIO, EXTPERIPH1, DAP2, RSVD3, RSVD4), + PINI(SPDIF_IN, AUDIO, SPDIF, USB, RSVD3, RSVD4), + PINI(SPDIF_OUT, AUDIO, SPDIF, RSVD2, RSVD3, RSVD4), + PINI(DAP2_FS, AUDIO, I2S1, HDA, RSVD3, RSVD4), + PINI(DAP2_DIN, AUDIO, I2S1, HDA, RSVD3, RSVD4), + PINI(DAP2_DOUT, AUDIO, I2S1, HDA, RSVD3, RSVD4), + PINI(DAP2_SCLK, AUDIO, I2S1, HDA, RSVD3, RSVD4), + PINI(DVFS_PWM, AUDIO, SPI6, CLDVFS, RSVD3, RSVD4), + PINI(GPIO_X1_AUD, AUDIO, SPI6, RSVD2, RSVD3, RSVD4), + PINI(GPIO_X3_AUD, AUDIO, SPI6, SPI1, RSVD3, RSVD4), + PINI(DVFS_CLK, AUDIO, SPI6, CLDVFS, RSVD3, RSVD4), + PINI(GPIO_X4_AUD, AUDIO, RSVD1, SPI1, SPI2, DAP2), + PINI(GPIO_X5_AUD, AUDIO, RSVD1, SPI1, SPI2, RSVD4), + PINI(GPIO_X6_AUD, AUDIO, SPI6, SPI1, SPI2, RSVD4), + PINI(GPIO_X7_AUD, AUDIO, RSVD1, SPI1, SPI2, RSVD4), + PIN_RESERVED, /* Reserved: 0x3388 - 0x338c */ + PIN_RESERVED, + PINI(SDMMC3_CLK, SDMMC3, SDMMC3, RSVD2, RSVD3, SPI3), + PINI(SDMMC3_CMD, SDMMC3, SDMMC3, PWM3, UARTA, SPI3), + PINI(SDMMC3_DAT0, SDMMC3, SDMMC3, RSVD2, RSVD3, SPI3), + PINI(SDMMC3_DAT1, SDMMC3, SDMMC3, PWM2, UARTA, SPI3), + PINI(SDMMC3_DAT2, SDMMC3, SDMMC3, PWM1, DISPA, SPI3), + PINI(SDMMC3_DAT3, SDMMC3, SDMMC3, PWM0, DISPB, SPI3), + PIN_RESERVED, /* Reserved: 0x33a8 - 0x33dc */ + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PINI(HDMI_CEC, SYS, CEC, SDMMC3, RSVD3, SOC), + PINI(SDMMC1_WP_N, SDMMC1, SDMMC1, CLK12, SPI4, UARTA), + PINI(SDMMC3_CD_N, SYS, SDMMC3, OWR, RSVD3, RSVD4), + PINI(GPIO_W2_AUD, AUDIO, SPI6, RSVD2, SPI2, I2C1), + PINI(GPIO_W3_AUD, AUDIO, SPI6, SPI1, SPI2, I2C1), + PINI(USB_VBUS_EN0, LCD, USB, RSVD2, RSVD3, RSVD4), + PINI(USB_VBUS_EN1, LCD, USB, RSVD2, RSVD3, RSVD4), + PINI(SDMMC3_CLK_LB_IN, SDMMC3, SDMMC3, RSVD2, RSVD3, RSVD4), + PINI(SDMMC3_CLK_LB_OUT, SDMMC3, SDMMC3, RSVD2, RSVD3, RSVD4), + PIN_RESERVED, /* Reserved: 0x3404 */ + PINO(RESET_OUT_N, SYS, RSVD1, RSVD2, RSVD3, RESET_OUT_N), +}; + +void pinmux_set_tristate(enum pmux_pingrp pin, int enable) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *tri = &pmt->pmt_ctl[pin]; + u32 reg; + + /* Error check on pin */ + assert(pmux_pingrp_isvalid(pin)); + + reg = readl(tri); + if (enable) + reg |= PMUX_TRISTATE_MASK; + else + reg &= ~PMUX_TRISTATE_MASK; + writel(reg, tri); +} + +void pinmux_tristate_enable(enum pmux_pingrp pin) +{ + pinmux_set_tristate(pin, 1); +} + +void pinmux_tristate_disable(enum pmux_pingrp pin) +{ + pinmux_set_tristate(pin, 0); +} + +void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pull = &pmt->pmt_ctl[pin]; + u32 reg; + + /* Error check on pin and pupd */ + assert(pmux_pingrp_isvalid(pin)); + assert(pmux_pin_pupd_isvalid(pupd)); + + reg = readl(pull); + reg &= ~(0x3 << PMUX_PULL_SHIFT); + reg |= (pupd << PMUX_PULL_SHIFT); + writel(reg, pull); +} + +void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *muxctl = &pmt->pmt_ctl[pin]; + int i, mux = -1; + u32 reg; + + /* Error check on pin and func */ + assert(pmux_pingrp_isvalid(pin)); + assert(pmux_func_isvalid(func)); + + /* Handle special values */ + if (func == PMUX_FUNC_SAFE) + func = tegra_soc_pingroups[pin].func_safe; + + if (func & PMUX_FUNC_RSVD1) { + mux = func & 0x3; + } else { + /* Search for the appropriate function */ + for (i = 0; i < 4; i++) { + if (tegra_soc_pingroups[pin].funcs[i] == func) { + mux = i; + break; + } + } + } + assert(mux != -1); + + reg = readl(muxctl); + reg &= ~(0x3 << PMUX_MUXCTL_SHIFT); + reg |= (mux << PMUX_MUXCTL_SHIFT); + writel(reg, muxctl); +} + +void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pin_io = &pmt->pmt_ctl[pin]; + u32 reg; + + /* Error check on pin and io */ + assert(pmux_pingrp_isvalid(pin)); + assert(pmux_pin_io_isvalid(io)); + + reg = readl(pin_io); + reg &= ~(0x1 << PMUX_IO_SHIFT); + reg |= (io & 0x1) << PMUX_IO_SHIFT; + writel(reg, pin_io); +} + +static int pinmux_set_lock(enum pmux_pingrp pin, enum pmux_pin_lock lock) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pin_lock = &pmt->pmt_ctl[pin]; + u32 reg; + + /* Error check on pin and lock */ + assert(pmux_pingrp_isvalid(pin)); + assert(pmux_pin_lock_isvalid(lock)); + + if (lock == PMUX_PIN_LOCK_DEFAULT) + return 0; + + reg = readl(pin_lock); + reg &= ~(0x1 << PMUX_LOCK_SHIFT); + if (lock == PMUX_PIN_LOCK_ENABLE) { + reg |= (0x1 << PMUX_LOCK_SHIFT); + } else { + /* lock == DISABLE, which isn't possible */ + printf("%s: Warning: lock == %d, DISABLE is not allowed!\n", + __func__, lock); + } + writel(reg, pin_lock); + + return 0; +} + +static int pinmux_set_od(enum pmux_pingrp pin, enum pmux_pin_od od) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pin_od = &pmt->pmt_ctl[pin]; + u32 reg; + + /* Error check on pin and od */ + assert(pmux_pingrp_isvalid(pin)); + assert(pmux_pin_od_isvalid(od)); + + if (od == PMUX_PIN_OD_DEFAULT) + return 0; + + reg = readl(pin_od); + reg &= ~(0x1 << PMUX_OD_SHIFT); + if (od == PMUX_PIN_OD_ENABLE) + reg |= (0x1 << PMUX_OD_SHIFT); + writel(reg, pin_od); + + return 0; +} + +static int pinmux_set_ioreset(enum pmux_pingrp pin, + enum pmux_pin_ioreset ioreset) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pin_ioreset = &pmt->pmt_ctl[pin]; + u32 reg; + + /* Error check on pin and ioreset */ + assert(pmux_pingrp_isvalid(pin)); + assert(pmux_pin_ioreset_isvalid(ioreset)); + + if (ioreset == PMUX_PIN_IO_RESET_DEFAULT) + return 0; + + reg = readl(pin_ioreset); + reg &= ~(0x1 << PMUX_IO_RESET_SHIFT); + if (ioreset == PMUX_PIN_IO_RESET_ENABLE) + reg |= (0x1 << PMUX_IO_RESET_SHIFT); + writel(reg, pin_ioreset); + + return 0; +} + +static int pinmux_set_rcv_sel(enum pmux_pingrp pin, + enum pmux_pin_rcv_sel rcv_sel) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pin_rcv_sel = &pmt->pmt_ctl[pin]; + u32 reg; + + /* Error check on pin and rcv_sel */ + assert(pmux_pingrp_isvalid(pin)); + assert(pmux_pin_rcv_sel_isvalid(rcv_sel)); + + if (rcv_sel == PMUX_PIN_RCV_SEL_DEFAULT) + return 0; + + reg = readl(pin_rcv_sel); + reg &= ~(0x1 << PMUX_RCV_SEL_SHIFT); + if (rcv_sel == PMUX_PIN_RCV_SEL_HIGH) + reg |= (0x1 << PMUX_RCV_SEL_SHIFT); + writel(reg, pin_rcv_sel); + + return 0; +} + +void pinmux_config_pingroup(struct pingroup_config *config) +{ + enum pmux_pingrp pin = config->pingroup; + + pinmux_set_func(pin, config->func); + pinmux_set_pullupdown(pin, config->pull); + pinmux_set_tristate(pin, config->tristate); + pinmux_set_io(pin, config->io); + pinmux_set_lock(pin, config->lock); + pinmux_set_od(pin, config->od); + pinmux_set_ioreset(pin, config->ioreset); + pinmux_set_rcv_sel(pin, config->rcv_sel); +} + +void pinmux_config_table(struct pingroup_config *config, int len) +{ + int i; + + for (i = 0; i < len; i++) + pinmux_config_pingroup(&config[i]); +} + +static int padgrp_set_drvup_slwf(enum pdrive_pingrp pad, int slwf) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_slwf = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check on pad and slwf */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_slw_isvalid(slwf)); + + /* NONE means unspecified/do not change/use POR value */ + if (slwf == PGRP_SLWF_NONE) + return 0; + + reg = readl(pad_slwf); + reg &= ~PGRP_SLWF_MASK; + reg |= (slwf << PGRP_SLWF_SHIFT); + writel(reg, pad_slwf); + + return 0; +} + +static int padgrp_set_drvdn_slwr(enum pdrive_pingrp pad, int slwr) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_slwr = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check on pad and slwr */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_slw_isvalid(slwr)); + + /* NONE means unspecified/do not change/use POR value */ + if (slwr == PGRP_SLWR_NONE) + return 0; + + reg = readl(pad_slwr); + reg &= ~PGRP_SLWR_MASK; + reg |= (slwr << PGRP_SLWR_SHIFT); + writel(reg, pad_slwr); + + return 0; +} + +static int padgrp_set_drvup(enum pdrive_pingrp pad, int drvup) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_drvup = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check on pad and drvup */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_drv_isvalid(drvup)); + + /* NONE means unspecified/do not change/use POR value */ + if (drvup == PGRP_DRVUP_NONE) + return 0; + + reg = readl(pad_drvup); + reg &= ~PGRP_DRVUP_MASK; + reg |= (drvup << PGRP_DRVUP_SHIFT); + writel(reg, pad_drvup); + + return 0; +} + +static int padgrp_set_drvdn(enum pdrive_pingrp pad, int drvdn) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_drvdn = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check on pad and drvdn */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_drv_isvalid(drvdn)); + + /* NONE means unspecified/do not change/use POR value */ + if (drvdn == PGRP_DRVDN_NONE) + return 0; + + reg = readl(pad_drvdn); + reg &= ~PGRP_DRVDN_MASK; + reg |= (drvdn << PGRP_DRVDN_SHIFT); + writel(reg, pad_drvdn); + + return 0; +} + +static int padgrp_set_lpmd(enum pdrive_pingrp pad, enum pgrp_lpmd lpmd) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_lpmd = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check pad and lpmd value */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_lpmd_isvalid(lpmd)); + + /* NONE means unspecified/do not change/use POR value */ + if (lpmd == PGRP_LPMD_NONE) + return 0; + + reg = readl(pad_lpmd); + reg &= ~PGRP_LPMD_MASK; + reg |= (lpmd << PGRP_LPMD_SHIFT); + writel(reg, pad_lpmd); + + return 0; +} + +static int padgrp_set_schmt(enum pdrive_pingrp pad, enum pgrp_schmt schmt) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_schmt = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check pad */ + assert(pmux_padgrp_isvalid(pad)); + + /* NONE means unspecified/do not change/use POR value */ + if (schmt == PGRP_SCHMT_NONE) + return 0; + + reg = readl(pad_schmt); + reg &= ~(1 << PGRP_SCHMT_SHIFT); + if (schmt == PGRP_SCHMT_ENABLE) + reg |= (0x1 << PGRP_SCHMT_SHIFT); + writel(reg, pad_schmt); + + return 0; +} +static int padgrp_set_hsm(enum pdrive_pingrp pad, enum pgrp_hsm hsm) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_hsm = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check pad */ + assert(pmux_padgrp_isvalid(pad)); + + /* NONE means unspecified/do not change/use POR value */ + if (hsm == PGRP_HSM_NONE) + return 0; + + reg = readl(pad_hsm); + reg &= ~(1 << PGRP_HSM_SHIFT); + if (hsm == PGRP_HSM_ENABLE) + reg |= (0x1 << PGRP_HSM_SHIFT); + writel(reg, pad_hsm); + + return 0; +} + +void padctrl_config_pingroup(struct padctrl_config *config) +{ + enum pdrive_pingrp pad = config->padgrp; + + padgrp_set_drvup_slwf(pad, config->slwf); + padgrp_set_drvdn_slwr(pad, config->slwr); + padgrp_set_drvup(pad, config->drvup); + padgrp_set_drvdn(pad, config->drvdn); + padgrp_set_lpmd(pad, config->lpmd); + padgrp_set_schmt(pad, config->schmt); + padgrp_set_hsm(pad, config->hsm); +} + +void padgrp_config_table(struct padctrl_config *config, int len) +{ + int i; + + for (i = 0; i < len; i++) + padctrl_config_pingroup(&config[i]); +} diff --git a/arch/arm/cpu/tegra20-common/clock.c b/arch/arm/cpu/tegra20-common/clock.c index 34124f9..0c4f5fb 100644 --- a/arch/arm/cpu/tegra20-common/clock.c +++ b/arch/arm/cpu/tegra20-common/clock.c @@ -412,9 +412,9 @@ int get_periph_clock_source(enum periph_id periph_id, * with its 16-bit divisor */ if (type == CLOCK_TYPE_PCXTS) - *mux_bits = 4; + *mux_bits = MASK_BITS_31_28; else - *mux_bits = 2; + *mux_bits = MASK_BITS_31_30; if (type == CLOCK_TYPE_PCMT16) *divider_bits = 16; else diff --git a/arch/arm/cpu/tegra30-common/clock.c b/arch/arm/cpu/tegra30-common/clock.c index 74bd22b..80ba2d8 100644 --- a/arch/arm/cpu/tegra30-common/clock.c +++ b/arch/arm/cpu/tegra30-common/clock.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2010-2014, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -60,12 +60,6 @@ enum { CLOCK_MAX_MUX = 8 /* number of source options for each clock */ }; -enum { - MASK_BITS_31_30 = 2, /* num of bits used to specify clock source */ - MASK_BITS_31_29, - MASK_BITS_29_28, -}; - /* * Clock source mux for each clock type. This just converts our enum into * a list of mux sources for use by the code. @@ -108,7 +102,7 @@ static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = { MASK_BITS_31_29}, { CLK(PERIPH), CLK(CGENERAL), CLK(SFROM32KHZ), CLK(OSC), CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), - MASK_BITS_29_28} + MASK_BITS_31_28} }; /* @@ -587,34 +581,7 @@ enum periph_id clk_id_to_periph_id(int clk_id) void clock_early_init(void) { - /* - * PLLP output frequency set to 408Mhz - * PLLC output frequency set to 228Mhz - */ - switch (clock_get_osc_freq()) { - case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */ - clock_set_rate(CLOCK_ID_PERIPH, 408, 12, 0, 8); - clock_set_rate(CLOCK_ID_CGENERAL, 456, 12, 1, 8); - break; - - case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */ - clock_set_rate(CLOCK_ID_PERIPH, 408, 26, 0, 8); - clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8); - break; - - case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */ - clock_set_rate(CLOCK_ID_PERIPH, 408, 13, 0, 8); - clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8); - break; - case CLOCK_OSC_FREQ_19_2: - default: - /* - * These are not supported. It is too early to print a - * message and the UART likely won't work anyway due to the - * oscillator being wrong. - */ - break; - } + tegra30_set_up_pllp(); } void arch_timer_init(void) diff --git a/arch/arm/dts/.gitignore b/arch/arm/dts/.gitignore new file mode 100644 index 0000000..b60ed20 --- /dev/null +++ b/arch/arm/dts/.gitignore @@ -0,0 +1 @@ +*.dtb diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile new file mode 100644 index 0000000..e2fcca5 --- /dev/null +++ b/arch/arm/dts/Makefile @@ -0,0 +1,36 @@ +dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \ + exynos5250-snow.dtb \ + exynos5250-smdk5250.dtb \ + exynos5420-smdk5420.dtb +dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ + tegra20-medcom-wide.dtb \ + tegra20-paz00.dtb \ + tegra20-plutux.dtb \ + tegra20-seaboard.dtb \ + tegra20-tec.dtb \ + tegra20-trimslice.dtb \ + tegra20-ventana.dtb \ + tegra20-whistler.dtb \ + tegra20-colibri_t20_iris.dtb \ + tegra30-beaver.dtb \ + tegra30-cardhu.dtb \ + tegra30-tec-ng.dtb \ + tegra114-dalmore.dtb \ + tegra124-venice2.dtb +dtb-$(CONFIG_ZYNQ) += zynq-zc702.dtb \ + zynq-zc706.dtb \ + zynq-zed.dtb \ + zynq-microzed.dtb \ + zynq-zc770-xm010.dtb \ + zynq-zc770-xm012.dtb \ + zynq-zc770-xm013.dtb + +targets += $(dtb-y) + +DTC_FLAGS += -R 4 -p 0x1000 + +PHONY += dtbs +dtbs: $(addprefix $(obj)/, $(dtb-y)) + @: + +clean-files := *.dtb diff --git a/arch/arm/dts/exynos5250-arndale.dts b/arch/arm/dts/exynos5250-arndale.dts new file mode 100644 index 0000000..202f2ea --- /dev/null +++ b/arch/arm/dts/exynos5250-arndale.dts @@ -0,0 +1,39 @@ +/* + * SAMSUNG Arndale board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SPDX-License-Identifier: GPL-2.0+ +*/ + +/dts-v1/; +#include "exynos5250.dtsi" + +/ { + model = "SAMSUNG Arndale board based on EXYNOS5250"; + compatible = "samsung,arndale", "samsung,exynos5250"; + + aliases { + serial0 = "/serial@12C20000"; + console = "/serial@12C20000"; + }; + + mmc@12200000 { + samsung,bus-width = <8>; + samsung,timing = <1 3 3>; + }; + + mmc@12210000 { + status = "disabled"; + }; + + mmc@12220000 { + samsung,bus-width = <4>; + samsung,timing = <1 2 3>; + }; + + mmc@12230000 { + status = "disabled"; + }; +}; diff --git a/arch/arm/dts/exynos5250-smdk5250.dts b/arch/arm/dts/exynos5250-smdk5250.dts new file mode 100644 index 0000000..9020382 --- /dev/null +++ b/arch/arm/dts/exynos5250-smdk5250.dts @@ -0,0 +1,151 @@ +/* + * SAMSUNG SMDK5250 board device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos5250.dtsi" + +/ { + model = "SAMSUNG SMDK5250 board based on EXYNOS5250"; + compatible = "samsung,smdk5250", "samsung,exynos5250"; + + aliases { + i2c0 = "/i2c@12c60000"; + i2c1 = "/i2c@12c70000"; + i2c2 = "/i2c@12c80000"; + i2c3 = "/i2c@12c90000"; + i2c4 = "/i2c@12ca0000"; + i2c5 = "/i2c@12cb0000"; + i2c6 = "/i2c@12cc0000"; + i2c7 = "/i2c@12cd0000"; + spi0 = "/spi@12d20000"; + spi1 = "/spi@12d30000"; + spi2 = "/spi@12d40000"; + spi3 = "/spi@131a0000"; + spi4 = "/spi@131b0000"; + mmc0 = "/mmc@12200000"; + mmc1 = "/mmc@12210000"; + mmc2 = "/mmc@12220000"; + mmc3 = "/mmc@12230000"; + serial0 = "/serial@12C30000"; + console = "/serial@12C30000"; + i2s = "/sound@3830000"; + }; + + sromc@12250000 { + bank = <1>; + srom-timing = <1 9 12 1 6 1 1>; + width = <2>; + lan@5000000 { + compatible = "smsc,lan9215", "smsc,lan"; + reg = <0x5000000 0x100>; + phy-mode = "mii"; + }; + }; + + sound@3830000 { + samsung,codec-type = "wm8994"; + }; + + sound@12d60000 { + status = "disabled"; + }; + + i2c@12c70000 { + soundcodec@1a { + reg = <0x1a>; + compatible = "wolfson,wm8994-codec"; + }; + }; + + i2c@12c60000 { + pmic@9 { + reg = <0x9>; + compatible = "maxim,max77686_pmic"; + }; + }; + + tmu@10060000 { + samsung,min-temp = <25>; + samsung,max-temp = <125>; + samsung,start-warning = <95>; + samsung,start-tripping = <105>; + samsung,hw-tripping = <110>; + samsung,efuse-min-value = <40>; + samsung,efuse-value = <55>; + samsung,efuse-max-value = <100>; + samsung,slope = <274761730>; + samsung,dc-value = <25>; + }; + + fimd@14400000 { + samsung,vl-freq = <60>; + samsung,vl-col = <2560>; + samsung,vl-row = <1600>; + samsung,vl-width = <2560>; + samsung,vl-height = <1600>; + + samsung,vl-clkp; + samsung,vl-dp; + samsung,vl-bpix = <4>; + + samsung,vl-hspw = <32>; + samsung,vl-hbpd = <80>; + samsung,vl-hfpd = <48>; + samsung,vl-vspw = <6>; + samsung,vl-vbpd = <37>; + samsung,vl-vfpd = <3>; + samsung,vl-cmd-allow-len = <0xf>; + + samsung,winid = <3>; + samsung,interface-mode = <1>; + samsung,dp-enabled = <1>; + samsung,dual-lcd-enabled = <0>; + }; + + dp@145b0000 { + samsung,lt-status = <0>; + + samsung,master-mode = <0>; + samsung,bist-mode = <0>; + samsung,bist-pattern = <0>; + samsung,h-sync-polarity = <0>; + samsung,v-sync-polarity = <0>; + samsung,interlaced = <0>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + }; + + mmc@12200000 { + samsung,bus-width = <8>; + samsung,timing = <1 3 3>; + samsung,removable = <0>; + }; + + mmc@12210000 { + status = "disabled"; + }; + + mmc@12220000 { + samsung,bus-width = <4>; + samsung,timing = <1 2 3>; + samsung,removable = <1>; + }; + + mmc@12230000 { + status = "disabled"; + }; + + ehci@12110000 { + samsung,vbus-gpio = <&gpio 0x316 0>; /* X26 */ + }; +}; diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts new file mode 100644 index 0000000..9b48a0c --- /dev/null +++ b/arch/arm/dts/exynos5250-snow.dts @@ -0,0 +1,187 @@ +/* + * SAMSUNG Snow board device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos5250.dtsi" + +/ { + model = "Google Snow"; + compatible = "google,snow", "samsung,exynos5250"; + + aliases { + i2c0 = "/i2c@12c60000"; + i2c1 = "/i2c@12c70000"; + i2c2 = "/i2c@12c80000"; + i2c3 = "/i2c@12c90000"; + i2c4 = "/i2c@12ca0000"; + i2c5 = "/i2c@12cb0000"; + i2c6 = "/i2c@12cc0000"; + i2c7 = "/i2c@12cd0000"; + spi0 = "/spi@12d20000"; + spi1 = "/spi@12d30000"; + spi2 = "/spi@12d40000"; + spi3 = "/spi@131a0000"; + spi4 = "/spi@131b0000"; + mmc0 = "/mmc@12200000"; + mmc1 = "/mmc@12210000"; + mmc2 = "/mmc@12220000"; + mmc3 = "/mmc@12230000"; + serial0 = "/serial@12C30000"; + console = "/serial@12C30000"; + i2s = "/sound@3830000"; + }; + + i2c4: i2c@12ca0000 { + cros-ec@1e { + reg = <0x1e>; + compatible = "google,cros-ec"; + i2c-max-frequency = <100000>; + ec-interrupt = <&gpio 782 1>; + }; + + power-regulator@48 { + compatible = "ti,tps65090"; + reg = <0x48>; + }; + }; + + spi@131b0000 { + spi-max-frequency = <1000000>; + spi-deactivate-delay = <100>; + cros-ec@0 { + reg = <0>; + compatible = "google,cros-ec"; + spi-max-frequency = <5000000>; + ec-interrupt = <&gpio 782 1>; + optimise-flash-write; + status = "disabled"; + }; + }; + + sound@3830000 { + samsung,codec-type = "max98095"; + codec-enable-gpio = <&gpio 0xb7 0>; + }; + + sound@12d60000 { + status = "disabled"; + }; + + i2c@12cd0000 { + soundcodec@22 { + reg = <0x22>; + compatible = "maxim,max98095-codec"; + }; + }; + + i2c@12c60000 { + pmic@9 { + reg = <0x9>; + compatible = "maxim,max77686_pmic"; + }; + }; + + mmc@12200000 { + samsung,bus-width = <8>; + samsung,timing = <1 3 3>; + samsung,removable = <0>; + }; + + mmc@12210000 { + status = "disabled"; + }; + + mmc@12220000 { + samsung,bus-width = <4>; + samsung,timing = <1 2 3>; + samsung,removable = <1>; + }; + + mmc@12230000 { + status = "disabled"; + }; + + ehci@12110000 { + samsung,vbus-gpio = <&gpio 0x309 0>; /* X11 */ + }; + + xhci@12000000 { + samsung,vbus-gpio = <&gpio 0x317 0>; /* X27 */ + }; + + tmu@10060000 { + samsung,min-temp = <25>; + samsung,max-temp = <125>; + samsung,start-warning = <95>; + samsung,start-tripping = <105>; + samsung,hw-tripping = <110>; + samsung,efuse-min-value = <40>; + samsung,efuse-value = <55>; + samsung,efuse-max-value = <100>; + samsung,slope = <274761730>; + samsung,dc-value = <25>; + }; + + cros-ec-keyb { + compatible = "google,cros-ec-keyb"; + google,key-rows = <8>; + google,key-columns = <13>; + google,repeat-delay-ms = <240>; + google,repeat-rate-ms = <30>; + google,ghost-filter; + /* + * Keymap entries take the form of 0xRRCCKKKK where + * RR=Row CC=Column KKKK=Key Code + * The values below are for a US keyboard layout and + * are taken from the Linux driver. Note that the + * 102ND key is not used for US keyboards. + */ + linux,keymap = < + /* CAPSLCK F1 B F10 */ + 0x0001003a 0x0002003b 0x00030030 0x00040044 + /* N = R_ALT ESC */ + 0x00060031 0x0008000d 0x000a0064 0x01010001 + /* F4 G F7 H */ + 0x0102003e 0x01030022 0x01040041 0x01060023 + /* ' F9 BKSPACE L_CTRL */ + 0x01080028 0x01090043 0x010b000e 0x0200001d + /* TAB F3 T F6 */ + 0x0201000f 0x0202003d 0x02030014 0x02040040 + /* ] Y 102ND [ */ + 0x0205001b 0x02060015 0x02070056 0x0208001a + /* F8 GRAVE F2 5 */ + 0x02090042 0x03010029 0x0302003c 0x03030006 + /* F5 6 - \ */ + 0x0304003f 0x03060007 0x0308000c 0x030b002b + /* R_CTRL A D F */ + 0x04000061 0x0401001e 0x04020020 0x04030021 + /* S K J ; */ + 0x0404001f 0x04050025 0x04060024 0x04080027 + /* L ENTER Z C */ + 0x04090026 0x040b001c 0x0501002c 0x0502002e + /* V X , M */ + 0x0503002f 0x0504002d 0x05050033 0x05060032 + /* L_SHIFT / . SPACE */ + 0x0507002a 0x05080035 0x05090034 0x050B0039 + /* 1 3 4 2 */ + 0x06010002 0x06020004 0x06030005 0x06040003 + /* 8 7 0 9 */ + 0x06050009 0x06060008 0x0608000b 0x0609000a + /* L_ALT DOWN RIGHT Q */ + 0x060a0038 0x060b006c 0x060c006a 0x07010010 + /* E R W I */ + 0x07020012 0x07030013 0x07040011 0x07050017 + /* U R_SHIFT P O */ + 0x07060016 0x07070036 0x07080019 0x07090018 + /* UP LEFT */ + 0x070b0067 0x070c0069>; + }; +}; diff --git a/arch/arm/dts/exynos5420-smdk5420.dts b/arch/arm/dts/exynos5420-smdk5420.dts new file mode 100644 index 0000000..d739763 --- /dev/null +++ b/arch/arm/dts/exynos5420-smdk5420.dts @@ -0,0 +1,169 @@ +/* + * SAMSUNG SMDK5420 board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/include/ "exynos5420.dtsi" + +/ { + model = "SAMSUNG SMDK5420 board based on EXYNOS5420"; + compatible = "samsung,smdk5420", "samsung,exynos5"; + + config { + hwid = "smdk5420 TEST A-A 9382"; + }; + + aliases { + i2c0 = "/i2c@12c60000"; + i2c1 = "/i2c@12c70000"; + i2c2 = "/i2c@12c80000"; + i2c3 = "/i2c@12c90000"; + i2c4 = "/i2c@12ca0000"; + i2c5 = "/i2c@12cb0000"; + i2c6 = "/i2c@12cc0000"; + i2c7 = "/i2c@12cd0000"; + i2c8 = "/i2c@12e00000"; + i2c9 = "/i2c@12e10000"; + i2c10 = "/i2c@12e20000"; + spi0 = "/spi@12d20000"; + spi1 = "/spi@12d30000"; + spi2 = "/spi@12d40000"; + spi3 = "/spi@131a0000"; + spi4 = "/spi@131b0000"; + mmc0 = "/mmc@12200000"; + mmc1 = "/mmc@12210000"; + mmc2 = "/mmc@12220000"; + xhci0 = "/xhci@12000000"; + xhci1 = "/xhci@12400000"; + serial0 = "/serial@12C30000"; + console = "/serial@12C30000"; + }; + + tmu@10060000 { + samsung,min-temp = <25>; + samsung,max-temp = <125>; + samsung,start-warning = <95>; + samsung,start-tripping = <105>; + samsung,hw-tripping = <110>; + samsung,efuse-min-value = <40>; + samsung,efuse-value = <55>; + samsung,efuse-max-value = <100>; + samsung,slope = <274761730>; + samsung,dc-value = <25>; + }; + + /* s2mps11 is on i2c bus 4 */ + i2c@12ca0000 { + #address-cells = <1>; + #size-cells = <0>; + pmic@66 { + reg = <0x66>; + compatible = "samsung,s2mps11-pmic"; + }; + }; + + spi@12d20000 { /* spi0 */ + spi-max-frequency = <50000000>; + firmware_storage_spi: flash@0 { + reg = <0>; + }; + }; + + fimd@14400000 { + samsung,vl-freq = <60>; + samsung,vl-col = <2560>; + samsung,vl-row = <1600>; + samsung,vl-width = <2560>; + samsung,vl-height = <1600>; + + samsung,vl-clkp; + samsung,vl-dp; + samsung,vl-bpix = <4>; + + samsung,vl-hspw = <32>; + samsung,vl-hbpd = <80>; + samsung,vl-hfpd = <48>; + samsung,vl-vspw = <6>; + samsung,vl-vbpd = <37>; + samsung,vl-vfpd = <3>; + samsung,vl-cmd-allow-len = <0xf>; + + samsung,winid = <3>; + samsung,interface-mode = <1>; + samsung,dp-enabled = <1>; + samsung,dual-lcd-enabled = <0>; + }; + + sound@3830000 { + samsung,codec-type = "wm8994"; + }; + + i2c@12c70000 { + soundcodec@1a { + reg = <0x1a>; + compatible = "wolfson,wm8994-codec"; + }; + }; + + mmc@12200000 { + samsung,bus-width = <8>; + samsung,timing = <1 3 3>; + samsung,removable = <0>; + samsung,pre-init; + }; + + mmc@12210000 { + status = "disabled"; + }; + + mmc@12220000 { + samsung,bus-width = <4>; + samsung,timing = <1 2 3>; + samsung,removable = <1>; + }; + + mmc@12230000 { + status = "disabled"; + }; + + fimd@14400000 { + /* sysmmu is not used in U-Boot */ + samsung,disable-sysmmu; + }; + + dp@145b0000 { + samsung,lt-status = <0>; + + samsung,master-mode = <0>; + samsung,bist-mode = <0>; + samsung,bist-pattern = <0>; + samsung,h-sync-polarity = <0>; + samsung,v-sync-polarity = <0>; + samsung,interlaced = <0>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + }; + + dmc { + mem-type = "ddr3"; + }; + + xhci1: xhci@12400000 { + compatible = "samsung,exynos5250-xhci"; + reg = <0x12400000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + + phy { + compatible = "samsung,exynos5250-usb3-phy"; + reg = <0x12500000 0x100>; + }; + }; +}; diff --git a/arch/arm/dts/tegra114-dalmore.dts b/arch/arm/dts/tegra114-dalmore.dts new file mode 100644 index 0000000..435c01e --- /dev/null +++ b/arch/arm/dts/tegra114-dalmore.dts @@ -0,0 +1,71 @@ +/dts-v1/; + +#include "tegra114.dtsi" + +/ { + model = "NVIDIA Dalmore"; + compatible = "nvidia,dalmore", "nvidia,tegra114"; + + aliases { + i2c0 = "/i2c@7000d000"; + i2c1 = "/i2c@7000c000"; + i2c2 = "/i2c@7000c400"; + i2c3 = "/i2c@7000c500"; + i2c4 = "/i2c@7000c700"; + sdhci0 = "/sdhci@78000600"; + sdhci1 = "/sdhci@78000400"; + usb0 = "/usb@7d008000"; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + }; + + spi@7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + sdhci@78000400 { + cd-gpios = <&gpio 170 1>; /* gpio PV2 */ + bus-width = <4>; + status = "okay"; + }; + + sdhci@78000600 { + bus-width = <8>; + status = "okay"; + }; + + usb@7d008000 { + /* SPDIF_IN: USB_VBUS_EN1 */ + nvidia,vbus-gpio = <&gpio 86 0>; + status = "okay"; + }; +}; diff --git a/arch/arm/dts/tegra114.dtsi b/arch/arm/dts/tegra114.dtsi index 626cc3c..f52fcf1 100644 --- a/arch/arm/dts/tegra114.dtsi +++ b/arch/arm/dts/tegra114.dtsi @@ -139,7 +139,7 @@ spi@7000d800 { compatible = "nvidia,tegra114-spi"; - reg = <0x7000d480 0x200>; + reg = <0x7000d800 0x200>; interrupts = <0 83 0x04>; nvidia,dma-request-selector = <&apbdma 17>; #address-cells = <1>; diff --git a/arch/arm/dts/tegra124-venice2.dts b/arch/arm/dts/tegra124-venice2.dts new file mode 100644 index 0000000..2f8d1dc --- /dev/null +++ b/arch/arm/dts/tegra124-venice2.dts @@ -0,0 +1,84 @@ +/dts-v1/; + +#include "tegra124.dtsi" + +/ { + model = "NVIDIA Venice2"; + compatible = "nvidia,venice2", "nvidia,tegra124"; + + aliases { + i2c0 = "/i2c@7000d000"; + i2c1 = "/i2c@7000c000"; + i2c2 = "/i2c@7000c400"; + i2c3 = "/i2c@7000c500"; + i2c4 = "/i2c@7000c700"; + i2c5 = "/i2c@7000d100"; + sdhci0 = "/sdhci@700b0600"; + sdhci1 = "/sdhci@700b0400"; + spi0 = "/spi@7000d400"; + spi1 = "/spi@7000da00"; + usb0 = "/usb@7d008000"; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + }; + + i2c@7000d100 { + status = "okay"; + clock-frequency = <400000>; + }; + + spi@7000d400 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + spi@7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + sdhci@700b0400 { + status = "okay"; + cd-gpios = <&gpio 170 0>; /* gpio PV2 */ + power-gpios = <&gpio 136 0>; /* gpio PR0 */ + bus-width = <4>; + }; + + sdhci@700b0600 { + status = "okay"; + bus-width = <8>; + }; + + usb@7d008000 { + status = "okay"; + nvidia,vbus-gpio = <&gpio 109 0>; /* gpio PN5, USB_VBUS_EN1 */ + }; +}; diff --git a/arch/arm/dts/tegra124.dtsi b/arch/arm/dts/tegra124.dtsi new file mode 100644 index 0000000..18a8b24 --- /dev/null +++ b/arch/arm/dts/tegra124.dtsi @@ -0,0 +1,250 @@ +#include "skeleton.dtsi" + +/ { + compatible = "nvidia,tegra124"; + + tegra_car: clock@60006000 { + compatible = "nvidia,tegra124-car"; + reg = <0x60006000 0x1000>; + #clock-cells = <1>; + }; + + apbdma: dma@60020000 { + compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma"; + reg = <0x60020000 0x1400>; + interrupts = <0 104 0x04 + 0 105 0x04 + 0 106 0x04 + 0 107 0x04 + 0 108 0x04 + 0 109 0x04 + 0 110 0x04 + 0 111 0x04 + 0 112 0x04 + 0 113 0x04 + 0 114 0x04 + 0 115 0x04 + 0 116 0x04 + 0 117 0x04 + 0 118 0x04 + 0 119 0x04 + 0 128 0x04 + 0 129 0x04 + 0 130 0x04 + 0 131 0x04 + 0 132 0x04 + 0 133 0x04 + 0 134 0x04 + 0 135 0x04 + 0 136 0x04 + 0 137 0x04 + 0 138 0x04 + 0 139 0x04 + 0 140 0x04 + 0 141 0x04 + 0 142 0x04 + 0 143 0x04>; + }; + + gpio: gpio@6000d000 { + compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio"; + reg = <0x6000d000 0x1000>; + interrupts = <0 32 0x04 + 0 33 0x04 + 0 34 0x04 + 0 35 0x04 + 0 55 0x04 + 0 87 0x04 + 0 89 0x04 + 0 125 0x04>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + i2c@7000c000 { + compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; + reg = <0x7000c000 0x100>; + interrupts = <0 38 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 12>; + status = "disabled"; + }; + + i2c@7000c400 { + compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; + reg = <0x7000c400 0x100>; + interrupts = <0 84 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 54>; + status = "disabled"; + }; + + i2c@7000c500 { + compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; + reg = <0x7000c500 0x100>; + interrupts = <0 92 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 67>; + status = "disabled"; + }; + + i2c@7000c700 { + compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; + reg = <0x7000c700 0x100>; + interrupts = <0 120 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 103>; + status = "disabled"; + }; + + i2c@7000d000 { + compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; + reg = <0x7000d000 0x100>; + interrupts = <0 53 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 47>; + status = "disabled"; + }; + + i2c@7000d100 { + compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; + reg = <0x7000d100 0x100>; + interrupts = <0 53 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 47>; + status = "disabled"; + }; + + spi@7000d400 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x7000d400 0x200>; + interrupts = <0 59 0x04>; + nvidia,dma-request-selector = <&apbdma 15>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + clocks = <&tegra_car 41>; + }; + + spi@7000d600 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x7000d600 0x200>; + interrupts = <0 82 0x04>; + nvidia,dma-request-selector = <&apbdma 16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + clocks = <&tegra_car 44>; + }; + + spi@7000d800 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x7000d800 0x200>; + interrupts = <0 83 0x04>; + nvidia,dma-request-selector = <&apbdma 17>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + clocks = <&tegra_car 46>; + }; + + spi@7000da00 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x7000da00 0x200>; + interrupts = <0 93 0x04>; + nvidia,dma-request-selector = <&apbdma 18>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + clocks = <&tegra_car 68>; + }; + + spi@7000dc00 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x7000dc00 0x200>; + interrupts = <0 94 0x04>; + nvidia,dma-request-selector = <&apbdma 27>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + clocks = <&tegra_car 104>; + }; + + spi@7000de00 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x7000de00 0x200>; + interrupts = <0 79 0x04>; + nvidia,dma-request-selector = <&apbdma 28>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + clocks = <&tegra_car 105>; + }; + + sdhci@700b0000 { + compatible = "nvidia,tegra124-sdhci"; + reg = <0x700b0000 0x200>; + interrupts = <0 14 0x04>; + clocks = <&tegra_car 14>; + status = "disabled"; + }; + + sdhci@700b0200 { + compatible = "nvidia,tegra124-sdhci"; + reg = <0x700b0200 0x200>; + interrupts = <0 15 0x04>; + clocks = <&tegra_car 9>; + status = "disabled"; + }; + + sdhci@700b0400 { + compatible = "nvidia,tegra124-sdhci"; + reg = <0x700b0400 0x200>; + interrupts = <0 19 0x04>; + clocks = <&tegra_car 69>; + status = "disabled"; + }; + + sdhci@700b0600 { + compatible = "nvidia,tegra124-sdhci"; + reg = <0x700b0600 0x200>; + interrupts = <0 31 0x04>; + clocks = <&tegra_car 15>; + status = "disabled"; + }; + + usb@7d000000 { + compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci"; + reg = <0x7d000000 0x4000>; + interrupts = < 52 >; + phy_type = "utmi"; + clocks = <&tegra_car 22>; /* PERIPH_ID_USBD */ + status = "disabled"; + }; + + usb@7d004000 { + compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci"; + reg = <0x7d004000 0x4000>; + interrupts = < 53 >; + phy_type = "hsic"; + clocks = <&tegra_car 58>; /* PERIPH_ID_USB2 */ + status = "disabled"; + }; + + usb@7d008000 { + compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci"; + reg = <0x7d008000 0x4000>; + interrupts = < 129 >; + phy_type = "utmi"; + clocks = <&tegra_car 59>; /* PERIPH_ID_USB3 */ + status = "disabled"; + }; +}; diff --git a/arch/arm/dts/tegra20-colibri_t20_iris.dts b/arch/arm/dts/tegra20-colibri_t20_iris.dts new file mode 100644 index 0000000..c0e54af --- /dev/null +++ b/arch/arm/dts/tegra20-colibri_t20_iris.dts @@ -0,0 +1,45 @@ +/dts-v1/; + +#include "tegra20.dtsi" + +/ { + model = "Toradex Colibri T20"; + compatible = "toradex,t20", "nvidia,tegra20"; + + aliases { + usb0 = "/usb@c5008000"; + usb1 = "/usb@c5000000"; + usb2 = "/usb@c5004000"; + sdhci0 = "/sdhci@c8000600"; + }; + + usb@c5000000 { + dr_mode = "otg"; + }; + + usb@c5004000 { + nvidia,phy-reset-gpio = <&gpio 169 0>; /* PV1 */ + nvidia,vbus-gpio = <&gpio 217 0>; /* PBB1 */ + }; + + usb@c5008000 { + nvidia,vbus-gpio = <&gpio 178 1>; /* PW2 low-active */ + }; + + nand-controller@70008000 { + nvidia,wp-gpios = <&gpio 144 0>; /* PS0 */ + nvidia,width = <8>; + nvidia,timing = <15 100 25 80 25 10 15 10 100>; + + nand@0 { + reg = <0>; + compatible = "nand-flash"; + }; + }; + + sdhci@c8000600 { + status = "okay"; + cd-gpios = <&gpio 23 1>; /* gpio PC7 */ + bus-width = <4>; + }; +}; diff --git a/arch/arm/dts/tegra20-harmony.dts b/arch/arm/dts/tegra20-harmony.dts new file mode 100644 index 0000000..b115f87 --- /dev/null +++ b/arch/arm/dts/tegra20-harmony.dts @@ -0,0 +1,105 @@ +/dts-v1/; + +#include "tegra20.dtsi" + +/ { + model = "NVIDIA Tegra20 Harmony evaluation board"; + compatible = "nvidia,harmony", "nvidia,tegra20"; + + aliases { + usb0 = "/usb@c5008000"; + usb1 = "/usb@c5004000"; + sdhci0 = "/sdhci@c8000600"; + sdhci1 = "/sdhci@c8000200"; + }; + + memory { + reg = <0x00000000 0x40000000>; + }; + + host1x { + status = "okay"; + dc@54200000 { + status = "okay"; + rgb { + status = "okay"; + nvidia,panel = <&lcd_panel>; + }; + }; + }; + + serial@70006300 { + clock-frequency = < 216000000 >; + }; + + nand-controller@70008000 { + nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */ + nvidia,width = <8>; + nvidia,timing = <26 100 20 80 20 10 12 10 70>; + nand@0 { + reg = <0>; + compatible = "hynix,hy27uf4g2b", "nand-flash"; + }; + }; + + i2c@7000c000 { + status = "disabled"; + }; + + i2c@7000c400 { + status = "disabled"; + }; + + i2c@7000c500 { + status = "disabled"; + }; + + i2c@7000d000 { + status = "disabled"; + }; + + usb@c5000000 { + status = "disabled"; + }; + + usb@c5004000 { + nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + }; + + sdhci@c8000200 { + status = "okay"; + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 155 0>; /* gpio PT3 */ + bus-width = <4>; + }; + + sdhci@c8000600 { + status = "okay"; + cd-gpios = <&gpio 58 1>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ + bus-width = <8>; + }; + + lcd_panel: panel { + clock = <42430000>; + xres = <1024>; + yres = <600>; + left-margin = <138>; + right-margin = <34>; + hsync-len = <136>; + lower-margin = <4>; + upper-margin = <21>; + vsync-len = <4>; + hsync-active-high; + vsyncx-active-high; + nvidia,bits-per-pixel = <16>; + nvidia,pwm = <&pwm 0 0>; + nvidia,backlight-enable-gpios = <&gpio 13 0>; /* PB5 */ + nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */ + nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ + nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */ + nvidia,panel-timings = <0 0 200 0 0>; + }; +}; diff --git a/arch/arm/dts/tegra20-medcom-wide.dts b/arch/arm/dts/tegra20-medcom-wide.dts new file mode 100644 index 0000000..a9a07f9 --- /dev/null +++ b/arch/arm/dts/tegra20-medcom-wide.dts @@ -0,0 +1,77 @@ +/dts-v1/; + +#include "tegra20-tamonten.dtsi" + +/ { + model = "Avionic Design Medcom-Wide"; + compatible = "ad,medcom-wide", "nvidia,tegra20"; + + aliases { + usb0 = "/usb@c5008000"; + sdhci0 = "/sdhci@c8000600"; + }; + + memory { + reg = <0x00000000 0x20000000>; + }; + + host1x { + status = "okay"; + + dc@54200000 { + status = "okay"; + + rgb { + nvidia,panel = <&lcd_panel>; + status = "okay"; + }; + }; + }; + + serial@70006300 { + clock-frequency = <216000000>; + }; + + i2c@7000c000 { + status = "disabled"; + }; + + i2c@7000c400 { + status = "disabled"; + }; + + i2c@7000c500 { + status = "disabled"; + }; + + i2c@7000d000 { + status = "disabled"; + }; + + usb@c5000000 { + status = "disabled"; + }; + + usb@c5004000 { + status = "disabled"; + }; + + lcd_panel: panel { + clock = <61715000>; + xres = <1366>; + yres = <768>; + left-margin = <2>; + right-margin = <47>; + hsync-len = <136>; + lower-margin = <21>; + upper-margin = <11>; + vsync-len = <4>; + + nvidia,bits-per-pixel = <16>; + nvidia,pwm = <&pwm 0 500000>; + nvidia,backlight-enable-gpios = <&gpio 13 0>; /* PB5 */ + nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ + nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */ + nvidia,panel-timings = <0 0 0 0>; + }; +}; diff --git a/arch/arm/dts/tegra20-paz00.dts b/arch/arm/dts/tegra20-paz00.dts new file mode 100644 index 0000000..780203c --- /dev/null +++ b/arch/arm/dts/tegra20-paz00.dts @@ -0,0 +1,91 @@ +/dts-v1/; + +#include "tegra20.dtsi" + +/ { + model = "Toshiba AC100 / Dynabook AZ"; + compatible = "compal,paz00", "nvidia,tegra20"; + + aliases { + usb0 = "/usb@c5008000"; + sdhci0 = "/sdhci@c8000600"; + sdhci1 = "/sdhci@c8000000"; + }; + + memory { + reg = <0x00000000 0x20000000>; + }; + + host1x { + status = "okay"; + dc@54200000 { + status = "okay"; + rgb { + status = "okay"; + nvidia,panel = <&lcd_panel>; + }; + }; + }; + + serial@70006000 { + clock-frequency = < 216000000 >; + }; + + i2c@7000c000 { + status = "disabled"; + }; + + i2c@7000c400 { + status = "disabled"; + }; + + i2c@7000c500 { + status = "disabled"; + }; + + i2c@7000d000 { + status = "disabled"; + }; + + usb@c5000000 { + status = "disabled"; + }; + + usb@c5004000 { + status = "disabled"; + }; + + sdhci@c8000000 { + status = "okay"; + cd-gpios = <&gpio 173 1>; /* gpio PV5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 169 0>; /* gpio PV1 */ + bus-width = <4>; + }; + + sdhci@c8000600 { + status = "okay"; + bus-width = <8>; + }; + + lcd_panel: panel { + /* PAZ00 has 1024x600 */ + clock = <54030000>; + xres = <1024>; + yres = <600>; + right-margin = <160>; + left-margin = <24>; + hsync-len = <136>; + upper-margin = <3>; + lower-margin = <61>; + vsync-len = <6>; + hsync-active-high; + nvidia,bits-per-pixel = <16>; + nvidia,pwm = <&pwm 0 0>; + nvidia,backlight-enable-gpios = <&gpio 164 0>; /* PU4 */ + nvidia,lvds-shutdown-gpios = <&gpio 102 0>; /* PM6 */ + nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ + nvidia,panel-vdd-gpios = <&gpio 4 0>; /* PA4 */ + nvidia,panel-timings = <400 4 203 17 15>; + }; +}; diff --git a/arch/arm/dts/tegra20-plutux.dts b/arch/arm/dts/tegra20-plutux.dts new file mode 100644 index 0000000..20016f2 --- /dev/null +++ b/arch/arm/dts/tegra20-plutux.dts @@ -0,0 +1,45 @@ +/dts-v1/; + +#include "tegra20-tamonten.dtsi" + +/ { + model = "Avionic Design Plutux"; + compatible = "ad,plutux", "nvidia,tegra20"; + + aliases { + usb0 = "/usb@c5008000"; + sdhci0 = "/sdhci@c8000600"; + }; + + memory { + reg = <0x00000000 0x20000000>; + }; + + serial@70006300 { + clock-frequency = <216000000>; + }; + + i2c@7000c000 { + status = "disabled"; + }; + + i2c@7000c400 { + status = "disabled"; + }; + + i2c@7000c500 { + status = "disabled"; + }; + + i2c@7000d000 { + status = "disabled"; + }; + + usb@c5000000 { + status = "disabled"; + }; + + usb@c5004000 { + status = "disabled"; + }; +}; diff --git a/arch/arm/dts/tegra20-seaboard.dts b/arch/arm/dts/tegra20-seaboard.dts new file mode 100644 index 0000000..c0e2e1e --- /dev/null +++ b/arch/arm/dts/tegra20-seaboard.dts @@ -0,0 +1,191 @@ +/dts-v1/; + +#include "tegra20.dtsi" + +/ { + model = "NVIDIA Seaboard"; + compatible = "nvidia,seaboard", "nvidia,tegra20"; + + chosen { + bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk1p3 rw rootwait"; + }; + + aliases { + /* This defines the order of our ports */ + usb0 = "/usb@c5008000"; + usb1 = "/usb@c5000000"; + i2c0 = "/i2c@7000d000"; + i2c1 = "/i2c@7000c000"; + i2c2 = "/i2c@7000c400"; + i2c3 = "/i2c@7000c500"; + sdhci0 = "/sdhci@c8000600"; + sdhci1 = "/sdhci@c8000400"; + }; + + memory { + device_type = "memory"; + reg = < 0x00000000 0x40000000 >; + }; + + host1x { + status = "okay"; + dc@54200000 { + status = "okay"; + rgb { + status = "okay"; + nvidia,panel = <&lcd_panel>; + }; + }; + }; + + /* This is not used in U-Boot, but is expected to be in kernel .dts */ + i2c@7000d000 { + clock-frequency = <100000>; + pmic@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + + clk_32k: clock { + compatible = "fixed-clock"; + /* + * leave out for now due to CPP: + * #clock-cells = <0>; + */ + clock-frequency = <32768>; + }; + }; + }; + + serial@70006300 { + clock-frequency = < 216000000 >; + }; + + nand-controller@70008000 { + nvidia,wp-gpios = <&gpio 59 0>; /* PH3 */ + nvidia,width = <8>; + nvidia,timing = <26 100 20 80 20 10 12 10 70>; + nand@0 { + reg = <0>; + compatible = "hynix,hy27uf4g2b", "nand-flash"; + }; + }; + + i2c@7000c000 { + clock-frequency = <100000>; + }; + + i2c@7000c400 { + status = "disabled"; + }; + + i2c@7000c500 { + clock-frequency = <100000>; + }; + + kbc@7000e200 { + linux,keymap = <0x00020011 0x0003001f 0x0004001e 0x0005002c + 0x000701d0 0x0107007d 0x02060064 0x02070038 0x03000006 + 0x03010005 0x03020013 0x03030012 0x03040021 0x03050020 + 0x0306002d 0x04000008 0x04010007 0x04020014 0x04030023 + 0x04040022 0x0405002f 0x0406002e 0x04070039 0x0500000a + 0x05010009 0x05020016 0x05030015 0x05040024 0x05050031 + 0x05060030 0x0507002b 0x0600000c 0x0601000b 0x06020018 + 0x06030017 0x06040026 0x06050025 0x06060033 0x06070032 + 0x0701000d 0x0702001b 0x0703001c 0x0707008b 0x08040036 + 0x0805002a 0x09050061 0x0907001d 0x0b00001a 0x0b010019 + 0x0b020028 0x0b030027 0x0b040035 0x0b050034 0x0c000044 + 0x0c010043 0x0c02000e 0x0c030004 0x0c040003 0x0c050067 + 0x0c0600d2 0x0c070077 0x0d00006e 0x0d01006f 0x0d030068 + 0x0d04006d 0x0d05006a 0x0d06006c 0x0d070069 0x0e000057 + 0x0e010058 0x0e020042 0x0e030010 0x0e04003e 0x0e05003d + 0x0e060002 0x0e070041 0x0f000001 0x0f010029 0x0f02003f + 0x0f03000f 0x0f04003b 0x0f05003c 0x0f06003a 0x0f070040 + 0x14000047 0x15000049 0x15010048 0x1502004b 0x1504004f + 0x16010062 0x1602004d 0x1603004c 0x16040051 0x16050050 + 0x16070052 0x1b010037 0x1b03004a 0x1b04004e 0x1b050053 + 0x1c050073 0x1d030066 0x1d04006b 0x1d0500e0 0x1d060072 + 0x1d0700e1 0x1e000045 0x1e010046 0x1e020071 + 0x1f04008a>; + linux,fn-keymap = <0x05040002>; + }; + + emc@7000f400 { + emc-table@190000 { + reg = < 190000 >; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = < 190000 >; + nvidia,emc-registers = < 0x0000000c 0x00000026 + 0x00000009 0x00000003 0x00000004 0x00000004 + 0x00000002 0x0000000c 0x00000003 0x00000003 + 0x00000002 0x00000001 0x00000004 0x00000005 + 0x00000004 0x00000009 0x0000000d 0x0000059f + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000003 0x00000001 0x0000000b 0x000000c8 + 0x00000003 0x00000007 0x00000004 0x0000000f + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0xa06204ae + 0x007dc010 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 >; + }; + emc-table@380000 { + reg = < 380000 >; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = < 380000 >; + nvidia,emc-registers = < 0x00000017 0x0000004b + 0x00000012 0x00000006 0x00000004 0x00000005 + 0x00000003 0x0000000c 0x00000006 0x00000006 + 0x00000003 0x00000001 0x00000004 0x00000005 + 0x00000004 0x00000009 0x0000000d 0x00000b5f + 0x00000000 0x00000003 0x00000003 0x00000006 + 0x00000006 0x00000001 0x00000011 0x000000c8 + 0x00000003 0x0000000e 0x00000007 0x0000000f + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0xe044048b + 0x007d8010 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 >; + }; + }; + + usb@c5000000 { + nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */ + dr_mode = "otg"; + }; + + usb@c5004000 { + status = "disabled"; + }; + + sdhci@c8000400 { + status = "okay"; + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ + bus-width = <4>; + }; + + sdhci@c8000600 { + status = "okay"; + bus-width = <8>; + }; + + lcd_panel: panel { + /* Seaboard has 1366x768 */ + clock = <70600000>; + xres = <1366>; + yres = <768>; + left-margin = <58>; + right-margin = <58>; + hsync-len = <58>; + lower-margin = <4>; + upper-margin = <4>; + vsync-len = <4>; + hsync-active-high; + nvidia,bits-per-pixel = <16>; + nvidia,pwm = <&pwm 2 0>; + nvidia,backlight-enable-gpios = <&gpio 28 0>; /* PD4 */ + nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */ + nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ + nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */ + nvidia,panel-timings = <400 4 203 17 15>; + }; +}; diff --git a/arch/arm/dts/tegra20-tamonten.dtsi b/arch/arm/dts/tegra20-tamonten.dtsi new file mode 100644 index 0000000..f379622 --- /dev/null +++ b/arch/arm/dts/tegra20-tamonten.dtsi @@ -0,0 +1,500 @@ +#include "tegra20.dtsi" + +/ { + model = "Avionic Design Tamonten SOM"; + compatible = "ad,tamonten", "nvidia,tegra20"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + host1x { + hdmi { + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + }; + }; + + pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ata { + nvidia,pins = "ata"; + nvidia,function = "ide"; + }; + atb { + nvidia,pins = "atb", "gma", "gme"; + nvidia,function = "sdio4"; + }; + atc { + nvidia,pins = "atc"; + nvidia,function = "nand"; + }; + atd { + nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu", + "spia", "spib", "spic"; + nvidia,function = "gmi"; + }; + cdev1 { + nvidia,pins = "cdev1"; + nvidia,function = "plla_out"; + }; + cdev2 { + nvidia,pins = "cdev2"; + nvidia,function = "pllp_out4"; + }; + crtp { + nvidia,pins = "crtp"; + nvidia,function = "crt"; + }; + csus { + nvidia,pins = "csus"; + nvidia,function = "vi_sensor_clk"; + }; + dap1 { + nvidia,pins = "dap1"; + nvidia,function = "dap1"; + }; + dap2 { + nvidia,pins = "dap2"; + nvidia,function = "dap2"; + }; + dap3 { + nvidia,pins = "dap3"; + nvidia,function = "dap3"; + }; + dap4 { + nvidia,pins = "dap4"; + nvidia,function = "dap4"; + }; + dta { + nvidia,pins = "dta", "dtd"; + nvidia,function = "sdio2"; + }; + dtb { + nvidia,pins = "dtb", "dtc", "dte"; + nvidia,function = "rsvd1"; + }; + dtf { + nvidia,pins = "dtf"; + nvidia,function = "i2c3"; + }; + gmc { + nvidia,pins = "gmc"; + nvidia,function = "uartd"; + }; + gpu7 { + nvidia,pins = "gpu7"; + nvidia,function = "rtck"; + }; + gpv { + nvidia,pins = "gpv", "slxa", "slxk"; + nvidia,function = "pcie"; + }; + hdint { + nvidia,pins = "hdint"; + nvidia,function = "hdmi"; + }; + i2cp { + nvidia,pins = "i2cp"; + nvidia,function = "i2cp"; + }; + irrx { + nvidia,pins = "irrx", "irtx"; + nvidia,function = "uarta"; + }; + kbca { + nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd", + "kbce", "kbcf"; + nvidia,function = "kbc"; + }; + lcsn { + nvidia,pins = "lcsn", "ld0", "ld1", "ld2", + "ld3", "ld4", "ld5", "ld6", "ld7", + "ld8", "ld9", "ld10", "ld11", "ld12", + "ld13", "ld14", "ld15", "ld16", "ld17", + "ldc", "ldi", "lhp0", "lhp1", "lhp2", + "lhs", "lm0", "lm1", "lpp", "lpw0", + "lpw1", "lpw2", "lsc0", "lsc1", "lsck", + "lsda", "lsdi", "lspi", "lvp0", "lvp1", + "lvs"; + nvidia,function = "displaya"; + }; + owc { + nvidia,pins = "owc", "spdi", "spdo", "uac"; + nvidia,function = "rsvd2"; + }; + pmc { + nvidia,pins = "pmc"; + nvidia,function = "pwr_on"; + }; + rm { + nvidia,pins = "rm"; + nvidia,function = "i2c1"; + }; + sdb { + nvidia,pins = "sdb", "sdc", "sdd"; + nvidia,function = "pwm"; + }; + sdio1 { + nvidia,pins = "sdio1"; + nvidia,function = "sdio1"; + }; + slxc { + nvidia,pins = "slxc", "slxd"; + nvidia,function = "spdif"; + }; + spid { + nvidia,pins = "spid", "spie", "spif"; + nvidia,function = "spi1"; + }; + spig { + nvidia,pins = "spig", "spih"; + nvidia,function = "spi2_alt"; + }; + uaa { + nvidia,pins = "uaa", "uab", "uda"; + nvidia,function = "ulpi"; + }; + uad { + nvidia,pins = "uad"; + nvidia,function = "irda"; + }; + uca { + nvidia,pins = "uca", "ucb"; + nvidia,function = "uartc"; + }; + conf_ata { + nvidia,pins = "ata", "atb", "atc", "atd", "ate", + "cdev1", "cdev2", "dap1", "dtb", "gma", + "gmb", "gmc", "gmd", "gme", "gpu7", + "gpv", "i2cp", "pta", "rm", "slxa", + "slxk", "spia", "spib", "uac"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + conf_ck32 { + nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", + "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; + nvidia,pull = <0>; + }; + conf_csus { + nvidia,pins = "csus", "spid", "spif"; + nvidia,pull = <1>; + nvidia,tristate = <1>; + }; + conf_crtp { + nvidia,pins = "crtp", "dap2", "dap3", "dap4", + "dtc", "dte", "dtf", "gpu", "sdio1", + "slxc", "slxd", "spdi", "spdo", "spig", + "uda"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + conf_ddc { + nvidia,pins = "ddc", "dta", "dtd", "kbca", + "kbcb", "kbcc", "kbcd", "kbce", "kbcf", + "sdc"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + conf_hdint { + nvidia,pins = "hdint", "lcsn", "ldc", "lm1", + "lpw1", "lsc1", "lsck", "lsda", "lsdi", + "lvp0", "owc", "sdb"; + nvidia,tristate = <1>; + }; + conf_irrx { + nvidia,pins = "irrx", "irtx", "sdd", "spic", + "spie", "spih", "uaa", "uab", "uad", + "uca", "ucb"; + nvidia,pull = <2>; + nvidia,tristate = <1>; + }; + conf_lc { + nvidia,pins = "lc", "ls"; + nvidia,pull = <2>; + }; + conf_ld0 { + nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", + "ld5", "ld6", "ld7", "ld8", "ld9", + "ld10", "ld11", "ld12", "ld13", "ld14", + "ld15", "ld16", "ld17", "ldi", "lhp0", + "lhp1", "lhp2", "lhs", "lm0", "lpp", + "lpw0", "lpw2", "lsc0", "lspi", "lvp1", + "lvs", "pmc"; + nvidia,tristate = <0>; + }; + conf_ld17_0 { + nvidia,pins = "ld17_0", "ld19_18", "ld21_20", + "ld23_22"; + nvidia,pull = <1>; + }; + }; + + state_i2cmux_ddc: pinmux_i2cmux_ddc { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; + + state_i2cmux_pta: pinmux_i2cmux_pta { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "i2c2"; + }; + }; + + state_i2cmux_idle: pinmux_i2cmux_idle { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; + }; + + i2s@70002800 { + status = "okay"; + }; + + serial@70006300 { + status = "okay"; + }; + + nand-controller@70008000 { + nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */ + nvidia,width = <8>; + nvidia,timing = <26 100 20 80 20 10 12 10 70>; + + nand@0 { + reg = <0>; + compatible = "hynix,hy27uf4g2b", "nand-flash"; + }; + }; + + i2c@7000c000 { + clock-frequency = <400000>; + status = "okay"; + }; + + i2c@7000c400 { + clock-frequency = <100000>; + status = "okay"; + }; + + i2cmux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&{/i2c@7000c400}>; + + pinctrl-names = "ddc", "pta", "idle"; + pinctrl-0 = <&state_i2cmux_ddc>; + pinctrl-1 = <&state_i2cmux_pta>; + pinctrl-2 = <&state_i2cmux_idle>; + + hdmi_ddc: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + i2c@7000d000 { + clock-frequency = <400000>; + status = "okay"; + + pmic: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 86 0x4>; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + sys-supply = <&vdd_5v0_reg>; + vin-sm0-supply = <&sys_reg>; + vin-sm1-supply = <&sys_reg>; + vin-sm2-supply = <&sys_reg>; + vinldo01-supply = <&sm2_reg>; + vinldo23-supply = <&sm2_reg>; + vinldo4-supply = <&sm2_reg>; + vinldo678-supply = <&sm2_reg>; + vinldo9-supply = <&sm2_reg>; + + regulators { + sys_reg: sys { + regulator-name = "vdd_sys"; + regulator-always-on; + }; + + sm0 { + regulator-name = "vdd_sys_sm0,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + sm1 { + regulator-name = "vdd_sys_sm1,vdd_cpu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + sm2_reg: sm2 { + regulator-name = "vdd_sys_sm2,vin_ldo*"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + ldo0 { + regulator-name = "vdd_ldo0,vddio_pex_clk"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo1 { + regulator-name = "vdd_ldo1,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo2 { + regulator-name = "vdd_ldo2,vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo3 { + regulator-name = "vdd_ldo3,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo4 { + regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo5 { + regulator-name = "vdd_ldo5,vcore_mmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + ldo6 { + regulator-name = "vdd_ldo6,avdd_vdac"; + /* + * According to the Tegra 2 Automotive + * DataSheet, a typical value for this + * would be 2.8V, but the PMIC only + * supports 2.85V. + */ + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + hdmi_vdd_reg: ldo7 { + regulator-name = "vdd_ldo7,avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + hdmi_pll_reg: ldo8 { + regulator-name = "vdd_ldo8,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo9 { + regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam"; + /* + * According to the Tegra 2 Automotive + * DataSheet, a typical value for this + * would be 2.8V, but the PMIC only + * supports 2.85V. + */ + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + ldo_rtc { + regulator-name = "vdd_rtc_out"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + temperature-sensor@4c { + compatible = "onnn,nct1008"; + reg = <0x4c>; + }; + }; + + pmc { + nvidia,invert-interrupt; + }; + + usb@c5008000 { + status = "okay"; + }; + + sdhci@c8000600 { + cd-gpios = <&gpio 58 1>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + bus-width = <4>; + status = "okay"; + }; + + regulators { + compatible = "simple-bus"; + + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v0_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; +}; diff --git a/arch/arm/dts/tegra20-tec.dts b/arch/arm/dts/tegra20-tec.dts new file mode 100644 index 0000000..4c1b08d --- /dev/null +++ b/arch/arm/dts/tegra20-tec.dts @@ -0,0 +1,77 @@ +/dts-v1/; + +#include "tegra20-tamonten.dtsi" + +/ { + model = "Avionic Design Tamonten Evaluation Carrier"; + compatible = "ad,tec", "nvidia,tegra20"; + + aliases { + usb0 = "/usb@c5008000"; + sdhci0 = "/sdhci@c8000600"; + }; + + memory { + reg = <0x00000000 0x20000000>; + }; + + host1x { + status = "okay"; + + dc@54200000 { + status = "okay"; + + rgb { + nvidia,panel = <&lcd_panel>; + status = "okay"; + }; + }; + }; + + serial@70006300 { + clock-frequency = <216000000>; + }; + + i2c@7000c000 { + status = "disabled"; + }; + + i2c@7000c400 { + status = "disabled"; + }; + + i2c@7000c500 { + status = "disabled"; + }; + + i2c@7000d000 { + status = "disabled"; + }; + + usb@c5000000 { + status = "disabled"; + }; + + usb@c5004000 { + status = "disabled"; + }; + + lcd_panel: panel { + clock = <33260000>; + xres = <800>; + yres = <480>; + left-margin = <120>; + right-margin = <120>; + hsync-len = <16>; + lower-margin = <15>; + upper-margin = <15>; + vsync-len = <15>; + + nvidia,bits-per-pixel = <16>; + nvidia,pwm = <&pwm 0 500000>; + nvidia,backlight-enable-gpios = <&gpio 13 0>; /* PB5 */ + nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ + nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */ + nvidia,panel-timings = <0 0 0 0>; + }; +}; diff --git a/arch/arm/dts/tegra20-trimslice.dts b/arch/arm/dts/tegra20-trimslice.dts new file mode 100644 index 0000000..ee31476 --- /dev/null +++ b/arch/arm/dts/tegra20-trimslice.dts @@ -0,0 +1,64 @@ +/dts-v1/; + +#include "tegra20.dtsi" + +/ { + model = "Compulab TrimSlice board"; + compatible = "compulab,trimslice", "nvidia,tegra20"; + + aliases { + usb0 = "/usb@c5008000"; + usb1 = "/usb@c5000000"; + sdhci0 = "/sdhci@c8000600"; + sdhci1 = "/sdhci@c8000000"; + }; + + memory { + reg = <0x00000000 0x40000000>; + }; + + serial@70006000 { + clock-frequency = <216000000>; + }; + + i2c@7000c000 { + status = "disabled"; + }; + + spi@7000c380 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + i2c@7000c400 { + status = "disabled"; + }; + + i2c@7000c500 { + status = "disabled"; + }; + + i2c@7000d000 { + status = "disabled"; + }; + + usb@c5000000 { + nvidia,vbus-gpio = <&gpio 170 0>; /* PV2 */ + }; + + usb@c5004000 { + status = "disabled"; + }; + + sdhci@c8000000 { + status = "okay"; + bus-width = <4>; + }; + + sdhci@c8000600 { + status = "okay"; + cd-gpios = <&gpio 121 1>; /* gpio PP1 */ + wp-gpios = <&gpio 122 0>; /* gpio PP2 */ + bus-width = <4>; + }; +}; diff --git a/arch/arm/dts/tegra20-ventana.dts b/arch/arm/dts/tegra20-ventana.dts new file mode 100644 index 0000000..1a526ba --- /dev/null +++ b/arch/arm/dts/tegra20-ventana.dts @@ -0,0 +1,91 @@ +/dts-v1/; + +#include "tegra20.dtsi" + +/ { + model = "NVIDIA Tegra20 Ventana evaluation board"; + compatible = "nvidia,ventana", "nvidia,tegra20"; + + aliases { + usb0 = "/usb@c5008000"; + sdhci0 = "/sdhci@c8000600"; + sdhci1 = "/sdhci@c8000400"; + }; + + memory { + reg = <0x00000000 0x40000000>; + }; + + host1x { + status = "okay"; + dc@54200000 { + status = "okay"; + rgb { + status = "okay"; + nvidia,panel = <&lcd_panel>; + }; + }; + }; + + serial@70006300 { + clock-frequency = < 216000000 >; + }; + + i2c@7000c000 { + status = "disabled"; + }; + + i2c@7000c400 { + status = "disabled"; + }; + + i2c@7000c500 { + status = "disabled"; + }; + + i2c@7000d000 { + status = "disabled"; + }; + + usb@c5000000 { + status = "disabled"; + }; + + usb@c5004000 { + status = "disabled"; + }; + + sdhci@c8000400 { + status = "okay"; + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ + bus-width = <4>; + }; + + sdhci@c8000600 { + status = "okay"; + bus-width = <8>; + }; + + lcd_panel: panel { + clock = <72072000>; + xres = <1366>; + yres = <768>; + left-margin = <58>; + right-margin = <58>; + hsync-len = <58>; + lower-margin = <4>; + upper-margin = <4>; + vsync-len = <4>; + hsync-active-high; + vsync-active-high; + nvidia,bits-per-pixel = <16>; + nvidia,pwm = <&pwm 2 0>; + nvidia,backlight-enable-gpios = <&gpio 28 0>; /* PD4 */ + nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */ + nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ + nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */ + nvidia,panel-timings = <0 0 200 0 0>; + }; +}; diff --git a/arch/arm/dts/tegra20-whistler.dts b/arch/arm/dts/tegra20-whistler.dts new file mode 100644 index 0000000..eb92264 --- /dev/null +++ b/arch/arm/dts/tegra20-whistler.dts @@ -0,0 +1,73 @@ +/dts-v1/; + +#include "tegra20.dtsi" + +/ { + model = "NVIDIA Tegra20 Whistler evaluation board"; + compatible = "nvidia,whistler", "nvidia,tegra20"; + + aliases { + i2c0 = "/i2c@7000d000"; + usb0 = "/usb@c5008000"; + sdhci0 = "/sdhci@c8000600"; + sdhci1 = "/sdhci@c8000400"; + }; + + memory { + device_type = "memory"; + reg = < 0x00000000 0x20000000 >; + }; + + serial@70006000 { + clock-frequency = < 216000000 >; + }; + + i2c@7000c000 { + status = "disabled"; + }; + + i2c@7000c400 { + status = "disabled"; + }; + + i2c@7000c500 { + status = "disabled"; + }; + + i2c@7000d000 { + clock-frequency = <100000>; + + pmic@3c { + compatible = "maxim,max8907b"; + reg = <0x3c>; + + clk_32k: clock { + compatible = "fixed-clock"; + /* + * leave out for now due to CPP: + * #clock-cells = <0>; + */ + clock-frequency = <32768>; + }; + }; + }; + + usb@c5000000 { + status = "disabled"; + }; + + usb@c5004000 { + status = "disabled"; + }; + + sdhci@c8000400 { + status = "okay"; + wp-gpios = <&gpio 173 0>; /* gpio PV5 */ + bus-width = <8>; + }; + + sdhci@c8000600 { + status = "okay"; + bus-width = <8>; + }; +}; diff --git a/arch/arm/dts/tegra30-beaver.dts b/arch/arm/dts/tegra30-beaver.dts new file mode 100644 index 0000000..a7cc93e --- /dev/null +++ b/arch/arm/dts/tegra30-beaver.dts @@ -0,0 +1,77 @@ +/dts-v1/; + +#include "tegra30.dtsi" + +/ { + model = "NVIDIA Beaver"; + compatible = "nvidia,beaver", "nvidia,tegra30"; + + aliases { + i2c0 = "/i2c@7000d000"; + i2c1 = "/i2c@7000c000"; + i2c2 = "/i2c@7000c400"; + i2c3 = "/i2c@7000c500"; + i2c4 = "/i2c@7000c700"; + sdhci0 = "/sdhci@78000600"; + sdhci1 = "/sdhci@78000000"; + usb0 = "/usb@7d008000"; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x7ff00000>; + }; + + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + }; + + spi@7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + spi-flash@1 { + compatible = "winbond,w25q32"; + reg = <1>; + spi-max-frequency = <20000000>; + }; + }; + + sdhci@78000000 { + status = "okay"; + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ + wp-gpios = <&gpio 155 0>; /* gpio PT3 */ + power-gpios = <&gpio 31 0>; /* gpio PD7 */ + bus-width = <4>; + }; + + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + }; + + usb@7d008000 { + nvidia,vbus-gpio = <&gpio 236 0>; /* PDD4 */ + status = "okay"; + }; +}; diff --git a/arch/arm/dts/tegra30-cardhu.dts b/arch/arm/dts/tegra30-cardhu.dts new file mode 100644 index 0000000..ea2cf76 --- /dev/null +++ b/arch/arm/dts/tegra30-cardhu.dts @@ -0,0 +1,72 @@ +/dts-v1/; + +#include "tegra30.dtsi" + +/ { + model = "NVIDIA Cardhu"; + compatible = "nvidia,cardhu", "nvidia,tegra30"; + + aliases { + i2c0 = "/i2c@7000d000"; + i2c1 = "/i2c@7000c000"; + i2c2 = "/i2c@7000c400"; + i2c3 = "/i2c@7000c500"; + i2c4 = "/i2c@7000c700"; + sdhci0 = "/sdhci@78000600"; + sdhci1 = "/sdhci@78000000"; + usb0 = "/usb@7d008000"; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + }; + + spi@7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + sdhci@78000000 { + status = "okay"; + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ + wp-gpios = <&gpio 155 0>; /* gpio PT3 */ + power-gpios = <&gpio 31 0>; /* gpio PD7 */ + bus-width = <4>; + }; + + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + }; + + usb@7d008000 { + nvidia,vbus-gpio = <&gpio 236 0>; /* PDD4 */ + status = "okay"; + }; +}; diff --git a/arch/arm/dts/tegra30-tamonten.dtsi b/arch/arm/dts/tegra30-tamonten.dtsi new file mode 100644 index 0000000..50d5762 --- /dev/null +++ b/arch/arm/dts/tegra30-tamonten.dtsi @@ -0,0 +1,69 @@ +#include "tegra30.dtsi" + +/ { + model = "Avionic Design Tamonten NG"; + compatible = "ad,tamonten-ng", "nvidia,tegra30"; + + memory { + reg = <0x80000000 0x40000000>; + }; + + aliases { + i2c0 = "/i2c@7000c000"; + i2c1 = "/i2c@7000c700"; + i2c2 = "/i2c@7000c400"; + i2c3 = "/i2c@7000c500"; + i2c4 = "/i2c@7000d000"; + sdhci0 = "/sdhci@78000600"; + sdhci1 = "/sdhci@78000400"; + sdhci2 = "/sdhci@78000000"; + usb0 = "/usb@7d008000"; + }; + + /* GEN1 */ + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* GEN2 */ + i2c@7000c400 { + clock-frequency = <100000>; + }; + + /* CAM */ + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* DDC */ + i2c@7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* PWR */ + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* SD slot on the base board */ + sdhci@78000400 { + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ + wp-gpios = <&gpio 67 0>; /* gpio PI3 */ + bus-width = <4>; + }; + + /* EMMC on the COM module */ + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + }; + + usb@7d008000 { + status = "okay"; + }; + +}; diff --git a/arch/arm/dts/tegra30-tec-ng.dts b/arch/arm/dts/tegra30-tec-ng.dts new file mode 100644 index 0000000..8a69e81 --- /dev/null +++ b/arch/arm/dts/tegra30-tec-ng.dts @@ -0,0 +1,18 @@ +/dts-v1/; + +#include "tegra30-tamonten.dtsi" + +/ { + model = "Avionic Design Tamonten™ NG Evaluation Carrier"; + compatible = "ad,tec-ng", "nvidia,tegra30"; + + /* GEN2 */ + i2c@7000c400 { + status = "okay"; + }; + + /* SD card slot */ + sdhci@78000400 { + status = "okay"; + }; +}; diff --git a/arch/arm/dts/zynq-microzed.dts b/arch/arm/dts/zynq-microzed.dts new file mode 100644 index 0000000..6da71c1 --- /dev/null +++ b/arch/arm/dts/zynq-microzed.dts @@ -0,0 +1,14 @@ +/* + * Xilinx MicroZED board DTS + * + * Copyright (C) 2013 Xilinx, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +/dts-v1/; +#include "zynq-7000.dtsi" + +/ { + model = "Zynq MicroZED Board"; + compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000"; +}; diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts new file mode 100644 index 0000000..667dc28 --- /dev/null +++ b/arch/arm/dts/zynq-zc702.dts @@ -0,0 +1,14 @@ +/* + * Xilinx ZC702 board DTS + * + * Copyright (C) 2013 Xilinx, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +/dts-v1/; +#include "zynq-7000.dtsi" + +/ { + model = "Zynq ZC702 Board"; + compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000"; +}; diff --git a/arch/arm/dts/zynq-zc706.dts b/arch/arm/dts/zynq-zc706.dts new file mode 100644 index 0000000..526fc88 --- /dev/null +++ b/arch/arm/dts/zynq-zc706.dts @@ -0,0 +1,14 @@ +/* + * Xilinx ZC706 board DTS + * + * Copyright (C) 2013 Xilinx, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +/dts-v1/; +#include "zynq-7000.dtsi" + +/ { + model = "Zynq ZC706 Board"; + compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000"; +}; diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts new file mode 100644 index 0000000..8b542a1 --- /dev/null +++ b/arch/arm/dts/zynq-zc770-xm010.dts @@ -0,0 +1,14 @@ +/* + * Xilinx ZC770 XM010 board DTS + * + * Copyright (C) 2013 Xilinx, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +/dts-v1/; +#include "zynq-7000.dtsi" + +/ { + model = "Zynq ZC770 XM010 Board"; + compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000"; +}; diff --git a/arch/arm/dts/zynq-zc770-xm012.dts b/arch/arm/dts/zynq-zc770-xm012.dts new file mode 100644 index 0000000..0379a07 --- /dev/null +++ b/arch/arm/dts/zynq-zc770-xm012.dts @@ -0,0 +1,14 @@ +/* + * Xilinx ZC770 XM012 board DTS + * + * Copyright (C) 2013 Xilinx, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +/dts-v1/; +#include "zynq-7000.dtsi" + +/ { + model = "Zynq ZC770 XM012 Board"; + compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000"; +}; diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts new file mode 100644 index 0000000..a4f9e05 --- /dev/null +++ b/arch/arm/dts/zynq-zc770-xm013.dts @@ -0,0 +1,14 @@ +/* + * Xilinx ZC770 XM013 board DTS + * + * Copyright (C) 2013 Xilinx, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +/dts-v1/; +#include "zynq-7000.dtsi" + +/ { + model = "Zynq ZC770 XM013 Board"; + compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000"; +}; diff --git a/arch/arm/dts/zynq-zed.dts b/arch/arm/dts/zynq-zed.dts new file mode 100644 index 0000000..91a5deb --- /dev/null +++ b/arch/arm/dts/zynq-zed.dts @@ -0,0 +1,14 @@ +/* + * Xilinx ZED board DTS + * + * Copyright (C) 2013 Xilinx, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +/dts-v1/; +#include "zynq-7000.dtsi" + +/ { + model = "Zynq ZED Board"; + compatible = "xlnx,zynq-zed", "xlnx,zynq-7000"; +}; diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile index ee5c872..16809fe 100644 --- a/arch/arm/imx-common/Makefile +++ b/arch/arm/imx-common/Makefile @@ -23,37 +23,54 @@ endif obj-$(CONFIG_CMD_BMODE) += cmd_bmode.o obj-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o -$(OBJTREE)/$(patsubst "%",%,$(CONFIG_IMX_CONFIG)).cfgtmp: $(OBJTREE)/%.cfgtmp : $(SRCTREE)/% - mkdir -p $(dir $@) - $(CC) -E -x c $< $(CPPFLAGS) -o $@ - -$(OBJTREE)/u-boot.imx: $(OBJTREE)/u-boot.bin $(OBJTREE)/$(patsubst "%",%,$(CONFIG_IMX_CONFIG)).cfgtmp - $(OBJTREE)/tools/mkimage -n $(filter-out %.bin,$^) -T imximage \ - -e $(CONFIG_SYS_TEXT_BASE) -d $< $@ - -$(OBJTREE)/SPL: $(OBJTREE)/spl/u-boot-spl.bin $(OBJTREE)/$(patsubst "%",%,$(CONFIG_IMX_CONFIG)).cfgtmp - $(OBJTREE)/tools/mkimage -n $(filter-out %.bin,$^) -T imximage \ - -e $(CONFIG_SPL_TEXT_BASE) -d $< $@ - -$(OBJTREE)/u-boot-with-spl.imx: $(OBJTREE)/SPL $(OBJTREE)/u-boot.bin - $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \ - -I binary -O binary $< $(OBJTREE)/spl/u-boot-spl-pad.imx - $(OBJTREE)/tools/mkimage -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \ - -e $(CONFIG_SYS_TEXT_BASE) -C none -d $(OBJTREE)/u-boot.bin \ - $(OBJTREE)/u-boot.uim - cat $(OBJTREE)/spl/u-boot-spl-pad.imx $(OBJTREE)/u-boot.uim > $@ - rm $(OBJTREE)/spl/u-boot-spl-pad.imx $(OBJTREE)/u-boot.uim - -$(OBJTREE)/u-boot-with-nand-spl.imx: $(OBJTREE)/SPL $(OBJTREE)/u-boot.bin - (echo -ne '\x00\x00\x00\x00\x46\x43\x42\x20\x01' && \ - dd bs=1015 count=1 if=/dev/zero 2>/dev/null) | \ - cat - $< > $(OBJTREE)/spl/u-boot-nand-spl.imx - $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \ - -I binary -O binary $(OBJTREE)/spl/u-boot-nand-spl.imx \ - $(OBJTREE)/spl/u-boot-nand-spl-pad.imx - rm $(OBJTREE)/spl/u-boot-nand-spl.imx - $(OBJTREE)/tools/mkimage -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \ - -e $(CONFIG_SYS_TEXT_BASE) -C none -d $(OBJTREE)/u-boot.bin \ - $(OBJTREE)/u-boot.uim - cat $(OBJTREE)/spl/u-boot-nand-spl-pad.imx $(OBJTREE)/u-boot.uim > $@ - rm $(OBJTREE)/spl/u-boot-nand-spl-pad.imx $(OBJTREE)/u-boot.uim +quiet_cmd_cpp_cfg = CFGS $@ + cmd_cpp_cfg = $(CPP) $(cpp_flags) -x c -o $@ $< + +IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%).cfgtmp + +$(IMX_CONFIG): %.cfgtmp: % FORCE + $(Q)mkdir -p $(dir $@) + $(call if_changed_dep,cpp_cfg) + +quiet_cmd_mkimage = UIMAGE $@ +cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \ + $(if $(KBUILD_VERBOSE:1=), >/dev/null) + +MKIMAGEFLAGS_u-boot.imx = -n $(filter-out $< $(PHONY),$^) -T imximage \ + -e $(CONFIG_SYS_TEXT_BASE) + +u-boot.imx: u-boot.bin $(IMX_CONFIG) FORCE + $(call if_changed,mkimage) + +MKIMAGEFLAGS_SPL = -n $(filter-out $< $(PHONY),$^) -T imximage \ + -e $(CONFIG_SPL_TEXT_BASE) + +SPL: spl/u-boot-spl.bin $(IMX_CONFIG) FORCE + $(call if_changed,mkimage) + +MKIMAGEFLAGS_u-boot.uim = -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \ + -e $(CONFIG_SYS_TEXT_BASE) -C none + +u-boot.uim: u-boot.bin FORCE + $(call if_changed,mkimage) + +OBJCOPYFLAGS += -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) +append = cat $(filter-out $< $(PHONY), $^) >> $@ + +quiet_cmd_pad_cat = CAT $@ +cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@ + +u-boot-with-spl.imx: SPL u-boot.uim FORCE + $(call if_changed,pad_cat) + +u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx u-boot.uim FORCE + $(call if_changed,pad_cat) + +quiet_cmd_u-boot-nand-spl_imx = GEN $@ +cmd_u-boot-nand-spl_imx = (echo -ne '\x00\x00\x00\x00\x46\x43\x42\x20\x01' && \ + dd bs=1015 count=1 if=/dev/zero 2>/dev/null) | cat - $< > $@ + +spl/u-boot-nand-spl.imx: SPL FORCE + $(call if_changed,u-boot-nand-spl_imx) + +targets += $(addprefix ../../../,$(IMX_CONFIG) SPL u-boot.uim spl/u-boot-nand-spl.imx) diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c index 9231649..a77c4de 100644 --- a/arch/arm/imx-common/cpu.c +++ b/arch/arm/imx-common/cpu.c @@ -106,6 +106,8 @@ const char *get_imx_type(u32 imxtype) switch (imxtype) { case MXC_CPU_MX6Q: return "6Q"; /* Quad-core version of the mx6 */ + case MXC_CPU_MX6D: + return "6D"; /* Dual-core version of the mx6 */ case MXC_CPU_MX6DL: return "6DL"; /* Dual Lite version of the mx6 */ case MXC_CPU_MX6SOLO: diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h index 9febfa2..0736258 100644 --- a/arch/arm/include/asm/arch-am33xx/cpu.h +++ b/arch/arm/include/asm/arch-am33xx/cpu.h @@ -332,7 +332,9 @@ struct cm_perpll { unsigned int mcasp1clkctrl; /* offset 0x240 */ unsigned int resv11; unsigned int mmc2clkctrl; /* offset 0x248 */ - unsigned int resv12[5]; + unsigned int resv12[3]; + unsigned int qspiclkctrl; /* offset 0x258 */ + unsigned int resv121; unsigned int usb0clkctrl; /* offset 0x260 */ unsigned int resv13[103]; unsigned int l4lsclkstctrl; /* offset 0x400 */ diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h index c1777df..fbe599d 100644 --- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h +++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h @@ -43,7 +43,7 @@ #define MT47H128M16RT25E_IOCTRL_VALUE 0x18B /* Micron MT41J128M16JT-125 */ -#define MT41J128MJT125_EMIF_READ_LATENCY 0x06 +#define MT41J128MJT125_EMIF_READ_LATENCY 0x100006 #define MT41J128MJT125_EMIF_TIM1 0x0888A39B #define MT41J128MJT125_EMIF_TIM2 0x26337FDA #define MT41J128MJT125_EMIF_TIM3 0x501F830F @@ -65,7 +65,7 @@ #define MT41J256MJT125_EMIF_SDCFG 0x61C04B32 /* Micron MT41J256M8HX-15E */ -#define MT41J256M8HX15E_EMIF_READ_LATENCY 0x06 +#define MT41J256M8HX15E_EMIF_READ_LATENCY 0x100006 #define MT41J256M8HX15E_EMIF_TIM1 0x0888A39B #define MT41J256M8HX15E_EMIF_TIM2 0x26337FDA #define MT41J256M8HX15E_EMIF_TIM3 0x501F830F @@ -97,7 +97,7 @@ #define MT41K256M16HA125E_IOCTRL_VALUE 0x18B /* Micron MT41J512M8RH-125 on EVM v1.5 */ -#define MT41J512M8RH125_EMIF_READ_LATENCY 0x06 +#define MT41J512M8RH125_EMIF_READ_LATENCY 0x100006 #define MT41J512M8RH125_EMIF_TIM1 0x0888A39B #define MT41J512M8RH125_EMIF_TIM2 0x26517FDA #define MT41J512M8RH125_EMIF_TIM3 0x501F84EF @@ -113,7 +113,7 @@ #define MT41J512M8RH125_IOCTRL_VALUE 0x18B /* Samsung K4B2G1646E-BIH9 */ -#define K4B2G1646EBIH9_EMIF_READ_LATENCY 0x07 +#define K4B2G1646EBIH9_EMIF_READ_LATENCY 0x100007 #define K4B2G1646EBIH9_EMIF_TIM1 0x0AAAE51B #define K4B2G1646EBIH9_EMIF_TIM2 0x2A1D7FDA #define K4B2G1646EBIH9_EMIF_TIM3 0x501F83FF diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h index 7a7d91b..0855d16 100644 --- a/arch/arm/include/asm/arch-am33xx/omap.h +++ b/arch/arm/include/asm/arch-am33xx/omap.h @@ -29,5 +29,6 @@ #define SRAM_SCRATCH_SPACE_ADDR 0x40337C00 #define AM4372_BOARD_NAME_START SRAM_SCRATCH_SPACE_ADDR #define AM4372_BOARD_NAME_END SRAM_SCRATCH_SPACE_ADDR + 0xC +#define QSPI_BASE 0x47900000 #endif #endif diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index 87b7d36..2e5c356 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -17,10 +17,6 @@ u32 get_cpu_rev(void); u32 get_sysboot_value(void); -#ifdef CONFIG_DISPLAY_CPUINFO -int print_cpuinfo(void); -#endif - extern struct ctrl_stat *cstat; u32 get_device_type(void); void save_omap_boot_params(void); diff --git a/arch/arm/include/asm/arch-bcm2835/mbox.h b/arch/arm/include/asm/arch-bcm2835/mbox.h index 38cb42a..dded857 100644 --- a/arch/arm/include/asm/arch-bcm2835/mbox.h +++ b/arch/arm/include/asm/arch-bcm2835/mbox.h @@ -143,7 +143,7 @@ struct bcm2835_mbox_tag_get_arm_mem { #define BCM2835_MBOX_POWER_DEVID_SPI 7 #define BCM2835_MBOX_POWER_DEVID_CCP2TX 8 -#define BCM2835_MBOX_POWER_STATE_RESP_ON (1 << 1) +#define BCM2835_MBOX_POWER_STATE_RESP_ON (1 << 0) /* Device doesn't exist */ #define BCM2835_MBOX_POWER_STATE_RESP_NODEV (1 << 1) diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h index 573f755..bccce63 100644 --- a/arch/arm/include/asm/arch-exynos/cpu.h +++ b/arch/arm/include/asm/arch-exynos/cpu.h @@ -185,9 +185,11 @@ static inline int s5p_get_cpu_rev(void) static inline void s5p_set_cpu_id(void) { - unsigned int pro_id = (readl(EXYNOS4_PRO_ID) & 0x00FFF000) >> 12; + unsigned int pro_id = readl(EXYNOS4_PRO_ID); + unsigned int cpu_id = (pro_id & 0x00FFF000) >> 12; + unsigned int cpu_rev = pro_id & 0x000000FF; - switch (pro_id) { + switch (cpu_id) { case 0x200: /* Exynos4210 EVT0 */ s5p_cpu_id = 0x4210; @@ -196,10 +198,12 @@ static inline void s5p_set_cpu_id(void) case 0x210: /* Exynos4210 EVT1 */ s5p_cpu_id = 0x4210; + s5p_cpu_rev = cpu_rev; break; case 0x412: /* Exynos4412 */ s5p_cpu_id = 0x4412; + s5p_cpu_rev = cpu_rev; break; case 0x520: /* Exynos5250 */ diff --git a/arch/arm/include/asm/arch-exynos/dwmmc.h b/arch/arm/include/asm/arch-exynos/dwmmc.h index 09d739d..a7ca12c 100644 --- a/arch/arm/include/asm/arch-exynos/dwmmc.h +++ b/arch/arm/include/asm/arch-exynos/dwmmc.h @@ -23,6 +23,10 @@ #define MPSCTRL_ENCRYPTION (0x1<<1) #define MPSCTRL_VALID (0x1<<0) +/* CLKSEL Register */ +#define DWMCI_DIVRATIO_BIT 24 +#define DWMCI_DIVRATIO_MASK 0x7 + #ifdef CONFIG_OF_CONTROL int exynos_dwmmc_init(const void *blob); #endif diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h index 2a19852..d6868fa 100644 --- a/arch/arm/include/asm/arch-exynos/gpio.h +++ b/arch/arm/include/asm/arch-exynos/gpio.h @@ -247,180 +247,81 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode); /* GPIO pins per bank */ #define GPIO_PER_BANK 8 - -#define exynos4_gpio_part1_get_nr(bank, pin) \ - ((((((unsigned int) &(((struct exynos4_gpio_part1 *) \ - EXYNOS4_GPIO_PART1_BASE)->bank)) \ - - EXYNOS4_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \ - * GPIO_PER_BANK) + pin) - -#define EXYNOS4_GPIO_PART1_MAX ((sizeof(struct exynos4_gpio_part1) \ - / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK) - -#define exynos4_gpio_part2_get_nr(bank, pin) \ - (((((((unsigned int) &(((struct exynos4_gpio_part2 *) \ - EXYNOS4_GPIO_PART2_BASE)->bank)) \ - - EXYNOS4_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \ - * GPIO_PER_BANK) + pin) + EXYNOS4_GPIO_PART1_MAX) - -#define exynos4x12_gpio_part1_get_nr(bank, pin) \ - ((((((unsigned int) &(((struct exynos4x12_gpio_part1 *) \ - EXYNOS4X12_GPIO_PART1_BASE)->bank)) \ - - EXYNOS4X12_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \ - * GPIO_PER_BANK) + pin) - -#define EXYNOS4X12_GPIO_PART1_MAX ((sizeof(struct exynos4x12_gpio_part1) \ - / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK) - -#define exynos4x12_gpio_part2_get_nr(bank, pin) \ - (((((((unsigned int) &(((struct exynos4x12_gpio_part2 *) \ - EXYNOS4X12_GPIO_PART2_BASE)->bank)) \ - - EXYNOS4X12_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \ - * GPIO_PER_BANK) + pin) + EXYNOS4X12_GPIO_PART1_MAX) - -#define EXYNOS4X12_GPIO_PART2_MAX ((sizeof(struct exynos4x12_gpio_part2) \ - / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK) - -#define exynos4x12_gpio_part3_get_nr(bank, pin) \ - (((((((unsigned int) &(((struct exynos4x12_gpio_part3 *) \ - EXYNOS4X12_GPIO_PART3_BASE)->bank)) \ - - EXYNOS4X12_GPIO_PART3_BASE) / sizeof(struct s5p_gpio_bank)) \ - * GPIO_PER_BANK) + pin) + EXYNOS4X12_GPIO_PART2_MAX) - -#define exynos5_gpio_part1_get_nr(bank, pin) \ - ((((((unsigned int) &(((struct exynos5_gpio_part1 *) \ - EXYNOS5_GPIO_PART1_BASE)->bank)) \ - - EXYNOS5_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \ - * GPIO_PER_BANK) + pin) - -#define EXYNOS5_GPIO_PART1_MAX ((sizeof(struct exynos5_gpio_part1) \ - / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK) - -#define exynos5_gpio_part2_get_nr(bank, pin) \ - (((((((unsigned int) &(((struct exynos5_gpio_part2 *) \ - EXYNOS5_GPIO_PART2_BASE)->bank)) \ - - EXYNOS5_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \ - * GPIO_PER_BANK) + pin) + EXYNOS5_GPIO_PART1_MAX) - -#define EXYNOS5_GPIO_PART2_MAX ((sizeof(struct exynos5_gpio_part2) \ - / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK) - -#define exynos5_gpio_part3_get_nr(bank, pin) \ - (((((((unsigned int) &(((struct exynos5_gpio_part3 *) \ - EXYNOS5_GPIO_PART3_BASE)->bank)) \ - - EXYNOS5_GPIO_PART3_BASE) / sizeof(struct s5p_gpio_bank)) \ - * GPIO_PER_BANK) + pin) + EXYNOS5_GPIO_PART2_MAX) - - -/* EXYNOS5420 */ -#define exynos5420_gpio_part1_get_nr(bank, pin) \ - ((((((unsigned int) &(((struct exynos5420_gpio_part1 *)\ - EXYNOS5420_GPIO_PART1_BASE)->bank)) \ - - EXYNOS5420_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \ - * GPIO_PER_BANK) + pin) - -#define EXYNOS5420_GPIO_PART1_MAX ((sizeof(struct exynos5420_gpio_part1) \ - / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK) - -#define exynos5420_gpio_part2_get_nr(bank, pin) \ - (((((((unsigned int) &(((struct exynos5420_gpio_part2 *)\ - EXYNOS5420_GPIO_PART2_BASE)->bank)) \ - - EXYNOS5420_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \ - * GPIO_PER_BANK) + pin) + EXYNOS5420_GPIO_PART1_MAX) - -#define EXYNOS5420_GPIO_PART2_MAX ((sizeof(struct exynos5420_gpio_part2) \ - / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK) - -#define exynos5420_gpio_part3_get_nr(bank, pin) \ - (((((((unsigned int) &(((struct exynos5420_gpio_part3 *)\ - EXYNOS5420_GPIO_PART3_BASE)->bank)) \ - - EXYNOS5420_GPIO_PART3_BASE) / sizeof(struct s5p_gpio_bank)) \ - * GPIO_PER_BANK) + pin) + EXYNOS5420_GPIO_PART2_MAX) - -#define EXYNOS5420_GPIO_PART3_MAX ((sizeof(struct exynos5420_gpio_part3) \ - / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK) - -#define exynos5420_gpio_part4_get_nr(bank, pin) \ - (((((((unsigned int) &(((struct exynos5420_gpio_part4 *)\ - EXYNOS5420_GPIO_PART4_BASE)->bank)) \ - - EXYNOS5420_GPIO_PART4_BASE) / sizeof(struct s5p_gpio_bank)) \ - * GPIO_PER_BANK) + pin) + EXYNOS5420_GPIO_PART3_MAX) - -#define EXYNOS5420_GPIO_PART4_MAX ((sizeof(struct exynos5420_gpio_part4) \ - / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK) - -#define EXYNOS5420_GPIO_PART5_MAX ((sizeof(struct exynos5420_gpio_part5) \ - / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK) - -static inline unsigned int s5p_gpio_base(int nr) +#define S5P_GPIO_PART_SHIFT (24) +#define S5P_GPIO_PART_MASK (0xff) +#define S5P_GPIO_BANK_SHIFT (8) +#define S5P_GPIO_BANK_MASK (0xffff) +#define S5P_GPIO_PIN_MASK (0xff) + +#define S5P_GPIO_SET_PART(x) \ + (((x) & S5P_GPIO_PART_MASK) << S5P_GPIO_PART_SHIFT) + +#define S5P_GPIO_GET_PART(x) \ + (((x) >> S5P_GPIO_PART_SHIFT) & S5P_GPIO_PART_MASK) + +#define S5P_GPIO_SET_PIN(x) \ + ((x) & S5P_GPIO_PIN_MASK) + +#define EXYNOS4_GPIO_SET_BANK(part, bank) \ + ((((unsigned)&(((struct exynos4_gpio_part##part *) \ + EXYNOS4_GPIO_PART##part##_BASE)->bank) \ + - EXYNOS4_GPIO_PART##part##_BASE) \ + & S5P_GPIO_BANK_MASK) << S5P_GPIO_BANK_SHIFT) + +#define EXYNOS4X12_GPIO_SET_BANK(part, bank) \ + ((((unsigned)&(((struct exynos4x12_gpio_part##part *) \ + EXYNOS4X12_GPIO_PART##part##_BASE)->bank) \ + - EXYNOS4X12_GPIO_PART##part##_BASE) \ + & S5P_GPIO_BANK_MASK) << S5P_GPIO_BANK_SHIFT) + +#define EXYNOS5_GPIO_SET_BANK(part, bank) \ + ((((unsigned)&(((struct exynos5420_gpio_part##part *) \ + EXYNOS5420_GPIO_PART##part##_BASE)->bank) \ + - EXYNOS5_GPIO_PART##part##_BASE) \ + & S5P_GPIO_BANK_MASK) << S5P_GPIO_BANK_SHIFT) + +#define EXYNOS5420_GPIO_SET_BANK(part, bank) \ + ((((unsigned)&(((struct exynos5420_gpio_part##part *) \ + EXYNOS5420_GPIO_PART##part##_BASE)->bank) \ + - EXYNOS5420_GPIO_PART##part##_BASE) \ + & S5P_GPIO_BANK_MASK) << S5P_GPIO_BANK_SHIFT) + +#define exynos4_gpio_get(part, bank, pin) \ + (S5P_GPIO_SET_PART(part) | \ + EXYNOS4_GPIO_SET_BANK(part, bank) | \ + S5P_GPIO_SET_PIN(pin)) + +#define exynos4x12_gpio_get(part, bank, pin) \ + (S5P_GPIO_SET_PART(part) | \ + EXYNOS4X12_GPIO_SET_BANK(part, bank) | \ + S5P_GPIO_SET_PIN(pin)) + +#define exynos5420_gpio_get(part, bank, pin) \ + (S5P_GPIO_SET_PART(part) | \ + EXYNOS5420_GPIO_SET_BANK(part, bank) | \ + S5P_GPIO_SET_PIN(pin)) + +#define exynos5_gpio_get(part, bank, pin) \ + (S5P_GPIO_SET_PART(part) | \ + EXYNOS5_GPIO_SET_BANK(part, bank) | \ + S5P_GPIO_SET_PIN(pin)) + +static inline unsigned int s5p_gpio_base(int gpio) { - if (cpu_is_exynos5()) { - if (proid_is_exynos5420()) { - if (nr < EXYNOS5420_GPIO_PART1_MAX) - return EXYNOS5420_GPIO_PART1_BASE; - else if (nr < EXYNOS5420_GPIO_PART2_MAX) - return EXYNOS5420_GPIO_PART2_BASE; - else if (nr < EXYNOS5420_GPIO_PART3_MAX) - return EXYNOS5420_GPIO_PART3_BASE; - else - return EXYNOS5420_GPIO_PART4_BASE; - } else { - if (nr < EXYNOS5_GPIO_PART1_MAX) - return EXYNOS5_GPIO_PART1_BASE; - else if (nr < EXYNOS5_GPIO_PART2_MAX) - return EXYNOS5_GPIO_PART2_BASE; - else - return EXYNOS5_GPIO_PART3_BASE; - } - } else if (cpu_is_exynos4()) { - if (nr < EXYNOS4_GPIO_PART1_MAX) - return EXYNOS4_GPIO_PART1_BASE; - else - return EXYNOS4_GPIO_PART2_BASE; + unsigned gpio_part = S5P_GPIO_GET_PART(gpio); + + switch (gpio_part) { + case 1: + return samsung_get_base_gpio_part1(); + case 2: + return samsung_get_base_gpio_part2(); + case 3: + return samsung_get_base_gpio_part3(); + case 4: + return samsung_get_base_gpio_part4(); + default: + return 0; } - - return 0; -} - -static inline unsigned int s5p_gpio_part_max(int nr) -{ - if (cpu_is_exynos5()) { - if (proid_is_exynos5420()) { - if (nr < EXYNOS5420_GPIO_PART1_MAX) - return 0; - else if (nr < EXYNOS5420_GPIO_PART2_MAX) - return EXYNOS5420_GPIO_PART1_MAX; - else if (nr < EXYNOS5420_GPIO_PART3_MAX) - return EXYNOS5420_GPIO_PART2_MAX; - else if (nr < EXYNOS5420_GPIO_PART4_MAX) - return EXYNOS5420_GPIO_PART3_MAX; - else - return EXYNOS5420_GPIO_PART4_MAX; - } else { - if (nr < EXYNOS5_GPIO_PART1_MAX) - return 0; - else if (nr < EXYNOS5_GPIO_PART2_MAX) - return EXYNOS5_GPIO_PART1_MAX; - else - return EXYNOS5_GPIO_PART2_MAX; - } - } else if (cpu_is_exynos4()) { - if (proid_is_exynos4412()) { - if (nr < EXYNOS4X12_GPIO_PART1_MAX) - return 0; - else if (nr < EXYNOS4X12_GPIO_PART2_MAX) - return EXYNOS4X12_GPIO_PART1_MAX; - else - return EXYNOS4X12_GPIO_PART2_MAX; - } else { - if (nr < EXYNOS4_GPIO_PART1_MAX) - return 0; - else - return EXYNOS4_GPIO_PART1_MAX; - } - } - - return 0; } #endif diff --git a/arch/arm/include/asm/arch-exynos/periph.h b/arch/arm/include/asm/arch-exynos/periph.h index 30c7f18..5c1c3d4 100644 --- a/arch/arm/include/asm/arch-exynos/periph.h +++ b/arch/arm/include/asm/arch-exynos/periph.h @@ -36,7 +36,6 @@ enum periph_id { PERIPH_ID_SDMMC3, PERIPH_ID_I2C8 = 87, PERIPH_ID_I2C9, - PERIPH_ID_I2C10 = 203, PERIPH_ID_I2S0 = 98, PERIPH_ID_I2S1 = 99, @@ -54,8 +53,8 @@ enum periph_id { PERIPH_ID_PWM2, PERIPH_ID_PWM3, PERIPH_ID_PWM4, + PERIPH_ID_I2C10 = 203, - PERIPH_ID_COUNT, PERIPH_ID_NONE = -1, }; diff --git a/arch/arm/include/asm/arch-imx/cpu.h b/arch/arm/include/asm/arch-imx/cpu.h new file mode 100644 index 0000000..a35940e --- /dev/null +++ b/arch/arm/include/asm/arch-imx/cpu.h @@ -0,0 +1,13 @@ +/* + * (C) Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#define MXC_CPU_MX51 0x51 +#define MXC_CPU_MX53 0x53 +#define MXC_CPU_MX6SL 0x60 +#define MXC_CPU_MX6DL 0x61 +#define MXC_CPU_MX6SOLO 0x62 +#define MXC_CPU_MX6Q 0x63 +#define MXC_CPU_MX6D 0x64 diff --git a/arch/arm/include/asm/arch-ixp/ixp425.h b/arch/arm/include/asm/arch-ixp/ixp425.h deleted file mode 100644 index c2e9c82..0000000 --- a/arch/arm/include/asm/arch-ixp/ixp425.h +++ /dev/null @@ -1,548 +0,0 @@ -/* - * include/asm-arm/arch-ixp425/ixp425.h - * - * Register definitions for IXP425 - * - * Copyright (C) 2002 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef _ASM_ARM_IXP425_H_ -#define _ASM_ARM_IXP425_H_ - -#define BIT(x) (1<<(x)) - -/* FIXME: Only this does work for u-boot... find out why... [RS] */ -#define UBOOT_REG_FIX 1 -#ifdef UBOOT_REG_FIX -# undef io_p2v -# undef __REG -# ifndef __ASSEMBLY__ -# define io_p2v(PhAdd) (PhAdd) -# define __REG(x) (*((volatile u32 *)io_p2v(x))) -# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y))) -# else -# define __REG(x) (x) -# endif -#endif /* UBOOT_REG_FIX */ - -/* - * - * IXP425 Memory map: - * - * Phy Phy Size Map Size Virt Description - * ========================================================================= - * - * 0x00000000 0x10000000 SDRAM 1 - * - * 0x10000000 0x10000000 SDRAM 2 - * - * 0x20000000 0x10000000 SDRAM 3 - * - * 0x30000000 0x10000000 SDRAM 4 - * - * The above four are aliases to the same memory location (0x00000000) - * - * 0x48000000 0x4000000 PCI Memory - * - * 0x50000000 0x10000000 Not Mapped EXP BUS - * - * 0x6000000 0x00004000 0x4000 0xFFFEB000 QMgr - * - * 0xC0000000 0x100 0x1000 0xFFFDD000 PCI CFG - * - * 0xC4000000 0x100 0x1000 0xFFFDE000 EXP CFG - * - * 0xC8000000 0xC000 0xC000 0xFFFDF000 PERIPHERAL - * - * 0xCC000000 0x100 0x1000 Not Mapped SDRAM CFG - */ - -/* - * SDRAM - */ -#define IXP425_SDRAM_BASE (0x00000000) -#define IXP425_SDRAM_BASE_ALT (0x10000000) - - -/* - * PCI Configuration space - */ -#define IXP425_PCI_CFG_BASE_PHYS (0xC0000000) -#define IXP425_PCI_CFG_REGION_SIZE (0x00001000) - -/* - * Expansion BUS Configuration registers - */ -#define IXP425_EXP_CFG_BASE_PHYS (0xC4000000) -#define IXP425_EXP_CFG_REGION_SIZE (0x00001000) - -/* - * Peripheral space - */ -#define IXP425_PERIPHERAL_BASE_PHYS (0xC8000000) -#define IXP425_PERIPHERAL_REGION_SIZE (0x0000C000) - -/* - * SDRAM configuration registers - */ -#define IXP425_SDRAM_CFG_BASE_PHYS (0xCC000000) - -/* - * Q Manager space .. not static mapped - */ -#define IXP425_QMGR_BASE_PHYS (0x60000000) -#define IXP425_QMGR_REGION_SIZE (0x00004000) - -/* - * Expansion BUS - * - * Expansion Bus 'lives' at either base1 or base 2 depending on the value of - * Exp Bus config registers: - * - * Setting bit 31 of IXP425_EXP_CFG0 puts SDRAM at zero, - * and The expansion bus to IXP425_EXP_BUS_BASE2 - */ -#define IXP425_EXP_BUS_BASE1_PHYS (0x00000000) -#define IXP425_EXP_BUS_BASE2_PHYS (0x50000000) - -#define IXP425_EXP_BUS_BASE_PHYS IXP425_EXP_BUS_BASE2_PHYS - -#define IXP425_EXP_BUS_REGION_SIZE (0x08000000) -#define IXP425_EXP_BUS_CSX_REGION_SIZE (0x01000000) - -#define IXP425_EXP_BUS_CS0_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x00000000) -#define IXP425_EXP_BUS_CS1_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x01000000) -#define IXP425_EXP_BUS_CS2_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x02000000) -#define IXP425_EXP_BUS_CS3_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x03000000) -#define IXP425_EXP_BUS_CS4_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x04000000) -#define IXP425_EXP_BUS_CS5_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x05000000) -#define IXP425_EXP_BUS_CS6_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x06000000) -#define IXP425_EXP_BUS_CS7_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x07000000) - -#define IXP425_FLASH_WRITABLE (0x2) -#define IXP425_FLASH_DEFAULT (0xbcd23c40) -#define IXP425_FLASH_WRITE (0xbcd23c42) - -#define IXP425_EXP_CS0_OFFSET 0x00 -#define IXP425_EXP_CS1_OFFSET 0x04 -#define IXP425_EXP_CS2_OFFSET 0x08 -#define IXP425_EXP_CS3_OFFSET 0x0C -#define IXP425_EXP_CS4_OFFSET 0x10 -#define IXP425_EXP_CS5_OFFSET 0x14 -#define IXP425_EXP_CS6_OFFSET 0x18 -#define IXP425_EXP_CS7_OFFSET 0x1C -#define IXP425_EXP_CFG0_OFFSET 0x20 -#define IXP425_EXP_CFG1_OFFSET 0x24 -#define IXP425_EXP_CFG2_OFFSET 0x28 -#define IXP425_EXP_CFG3_OFFSET 0x2C - -/* - * Expansion Bus Controller registers. - */ -#ifndef __ASSEMBLY__ -#define IXP425_EXP_REG(x) ((volatile u32 *)(IXP425_EXP_CFG_BASE_PHYS+(x))) -#else -#define IXP425_EXP_REG(x) (IXP425_EXP_CFG_BASE_PHYS+(x)) -#endif - -#define IXP425_EXP_CS0 IXP425_EXP_REG(IXP425_EXP_CS0_OFFSET) -#define IXP425_EXP_CS1 IXP425_EXP_REG(IXP425_EXP_CS1_OFFSET) -#define IXP425_EXP_CS2 IXP425_EXP_REG(IXP425_EXP_CS2_OFFSET) -#define IXP425_EXP_CS3 IXP425_EXP_REG(IXP425_EXP_CS3_OFFSET) -#define IXP425_EXP_CS4 IXP425_EXP_REG(IXP425_EXP_CS4_OFFSET) -#define IXP425_EXP_CS5 IXP425_EXP_REG(IXP425_EXP_CS5_OFFSET) -#define IXP425_EXP_CS6 IXP425_EXP_REG(IXP425_EXP_CS6_OFFSET) -#define IXP425_EXP_CS7 IXP425_EXP_REG(IXP425_EXP_CS7_OFFSET) - -#define IXP425_EXP_CFG0 IXP425_EXP_REG(IXP425_EXP_CFG0_OFFSET) -#define IXP425_EXP_CFG1 IXP425_EXP_REG(IXP425_EXP_CFG1_OFFSET) -#define IXP425_EXP_CFG2 IXP425_EXP_REG(IXP425_EXP_CFG2_OFFSET) -#define IXP425_EXP_CFG3 IXP425_EXP_REG(IXP425_EXP_CFG3_OFFSET) - -/* - * SDRAM Controller registers. - */ -#define IXP425_SDR_CONFIG_OFFSET 0x00 -#define IXP425_SDR_REFRESH_OFFSET 0x04 -#define IXP425_SDR_IR_OFFSET 0x08 - -#define IXP425_SDRAM_REG(x) (IXP425_SDRAM_CFG_BASE_PHYS+(x)) - -#define IXP425_SDR_CONFIG IXP425_SDRAM_REG(IXP425_SDR_CONFIG_OFFSET) -#define IXP425_SDR_REFRESH IXP425_SDRAM_REG(IXP425_SDR_REFRESH_OFFSET) -#define IXP425_SDR_IR IXP425_SDRAM_REG(IXP425_SDR_IR_OFFSET) - -/* - * UART registers - */ -#define IXP425_UART1 0 -#define IXP425_UART2 0x1000 - -#define IXP425_UART_RBR_OFFSET 0x00 -#define IXP425_UART_THR_OFFSET 0x00 -#define IXP425_UART_DLL_OFFSET 0x00 -#define IXP425_UART_IER_OFFSET 0x04 -#define IXP425_UART_DLH_OFFSET 0x04 -#define IXP425_UART_IIR_OFFSET 0x08 -#define IXP425_UART_FCR_OFFSET 0x00 -#define IXP425_UART_LCR_OFFSET 0x0c -#define IXP425_UART_MCR_OFFSET 0x10 -#define IXP425_UART_LSR_OFFSET 0x14 -#define IXP425_UART_MSR_OFFSET 0x18 -#define IXP425_UART_SPR_OFFSET 0x1c -#define IXP425_UART_ISR_OFFSET 0x20 - -#define IXP425_UART_CFG_BASE_PHYS (0xc8000000) - -#define RBR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_RBR_OFFSET) -#define THR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_THR_OFFSET) -#define DLL(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_DLL_OFFSET) -#define IER(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_IER_OFFSET) -#define DLH(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_DLH_OFFSET) -#define IIR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_IIR_OFFSET) -#define FCR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_FCR_OFFSET) -#define LCR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_LCR_OFFSET) -#define MCR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_MCR_OFFSET) -#define LSR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_LSR_OFFSET) -#define MSR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_MSR_OFFSET) -#define SPR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_SPR_OFFSET) -#define ISR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_ISR_OFFSET) - -#define IER_DMAE (1 << 7) /* DMA Requests Enable */ -#define IER_UUE (1 << 6) /* UART Unit Enable */ -#define IER_NRZE (1 << 5) /* NRZ coding Enable */ -#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */ -#define IER_MIE (1 << 3) /* Modem Interrupt Enable */ -#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */ -#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */ -#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */ - -#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */ -#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */ -#define IIR_TOD (1 << 3) /* Time Out Detected */ -#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */ -#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */ -#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */ - -#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */ -#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */ -#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */ -#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */ -#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */ -#define FCR_ITL_1 (0) -#define FCR_ITL_8 (FCR_ITL1) -#define FCR_ITL_16 (FCR_ITL2) -#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1) - -#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */ -#define LCR_SB (1 << 6) /* Set Break */ -#define LCR_STKYP (1 << 5) /* Sticky Parity */ -#define LCR_EPS (1 << 4) /* Even Parity Select */ -#define LCR_PEN (1 << 3) /* Parity Enable */ -#define LCR_STB (1 << 2) /* Stop Bit */ -#define LCR_WLS1 (1 << 1) /* Word Length Select */ -#define LCR_WLS0 (1 << 0) /* Word Length Select */ - -#define LSR_FIFOE (1 << 7) /* FIFO Error Status */ -#define LSR_TEMT (1 << 6) /* Transmitter Empty */ -#define LSR_TDRQ (1 << 5) /* Transmit Data Request */ -#define LSR_BI (1 << 4) /* Break Interrupt */ -#define LSR_FE (1 << 3) /* Framing Error */ -#define LSR_PE (1 << 2) /* Parity Error */ -#define LSR_OE (1 << 1) /* Overrun Error */ -#define LSR_DR (1 << 0) /* Data Ready */ - -#define MCR_LOOP (1 << 4) */ -#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */ -#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */ -#define MCR_RTS (1 << 1) /* Request to Send */ -#define MCR_DTR (1 << 0) /* Data Terminal Ready */ - -#define MSR_DCD (1 << 7) /* Data Carrier Detect */ -#define MSR_RI (1 << 6) /* Ring Indicator */ -#define MSR_DSR (1 << 5) /* Data Set Ready */ -#define MSR_CTS (1 << 4) /* Clear To Send */ -#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */ -#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */ -#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */ -#define MSR_DCTS (1 << 0) /* Delta Clear To Send */ - -#define IXP425_CONSOLE_UART_BASE_PHYS IXP425_UART1_BASE_PHYS -/* - * Peripheral Space Registers - */ -#define IXP425_UART1_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x0000) -#define IXP425_UART2_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x1000) -#define IXP425_PMU_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x2000) -#define IXP425_INTC_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x3000) -#define IXP425_GPIO_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x4000) -#define IXP425_TIMER_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x5000) -#define IXP425_NPEA_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x6000) -#define IXP425_NPEB_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x7000) -#define IXP425_NPEC_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x8000) -#define IXP425_EthA_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x9000) -#define IXP425_EthB_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0xA000) -#define IXP425_USB_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0xB000) - -/* - * UART Register Definitions , Offsets only as there are 2 UARTS. - * IXP425_UART1_BASE , IXP425_UART2_BASE. - */ - -#undef UART_NO_RX_INTERRUPT - -#define IXP425_UART_XTAL 14745600 - -/* - * Constants to make it easy to access Interrupt Controller registers - */ -#define IXP425_ICPR_OFFSET 0x00 /* Interrupt Status */ -#define IXP425_ICMR_OFFSET 0x04 /* Interrupt Enable */ -#define IXP425_ICLR_OFFSET 0x08 /* Interrupt IRQ/FIQ Select */ -#define IXP425_ICIP_OFFSET 0x0C /* IRQ Status */ -#define IXP425_ICFP_OFFSET 0x10 /* FIQ Status */ -#define IXP425_ICHR_OFFSET 0x14 /* Interrupt Priority */ -#define IXP425_ICIH_OFFSET 0x18 /* IRQ Highest Pri Int */ -#define IXP425_ICFH_OFFSET 0x1C /* FIQ Highest Pri Int */ - -#define N_IRQS 32 -#define IXP425_TIMER_2_IRQ 11 - -/* - * Interrupt Controller Register Definitions. - */ -#ifndef __ASSEMBLY__ -#define IXP425_INTC_REG(x) ((volatile u32 *)(IXP425_INTC_BASE_PHYS+(x))) -#else -#define IXP425_INTC_REG(x) (IXP425_INTC_BASE_PHYS+(x)) -#endif - -#define IXP425_ICPR IXP425_INTC_REG(IXP425_ICPR_OFFSET) -#define IXP425_ICMR IXP425_INTC_REG(IXP425_ICMR_OFFSET) -#define IXP425_ICLR IXP425_INTC_REG(IXP425_ICLR_OFFSET) -#define IXP425_ICIP IXP425_INTC_REG(IXP425_ICIP_OFFSET) -#define IXP425_ICFP IXP425_INTC_REG(IXP425_ICFP_OFFSET) -#define IXP425_ICHR IXP425_INTC_REG(IXP425_ICHR_OFFSET) -#define IXP425_ICIH IXP425_INTC_REG(IXP425_ICIH_OFFSET) -#define IXP425_ICFH IXP425_INTC_REG(IXP425_ICFH_OFFSET) - -/* - * Constants to make it easy to access GPIO registers - */ -#define IXP425_GPIO_GPOUTR_OFFSET 0x00 -#define IXP425_GPIO_GPOER_OFFSET 0x04 -#define IXP425_GPIO_GPINR_OFFSET 0x08 -#define IXP425_GPIO_GPISR_OFFSET 0x0C -#define IXP425_GPIO_GPIT1R_OFFSET 0x10 -#define IXP425_GPIO_GPIT2R_OFFSET 0x14 -#define IXP425_GPIO_GPCLKR_OFFSET 0x18 -#define IXP425_GPIO_GPDBSELR_OFFSET 0x1C - -/* - * GPIO Register Definitions. - * [Only perform 32bit reads/writes] - */ -#define IXP425_GPIO_REG(x) ((volatile u32 *)(IXP425_GPIO_BASE_PHYS+(x))) - -#define IXP425_GPIO_GPOUTR IXP425_GPIO_REG(IXP425_GPIO_GPOUTR_OFFSET) -#define IXP425_GPIO_GPOER IXP425_GPIO_REG(IXP425_GPIO_GPOER_OFFSET) -#define IXP425_GPIO_GPINR IXP425_GPIO_REG(IXP425_GPIO_GPINR_OFFSET) -#define IXP425_GPIO_GPISR IXP425_GPIO_REG(IXP425_GPIO_GPISR_OFFSET) -#define IXP425_GPIO_GPIT1R IXP425_GPIO_REG(IXP425_GPIO_GPIT1R_OFFSET) -#define IXP425_GPIO_GPIT2R IXP425_GPIO_REG(IXP425_GPIO_GPIT2R_OFFSET) -#define IXP425_GPIO_GPCLKR IXP425_GPIO_REG(IXP425_GPIO_GPCLKR_OFFSET) -#define IXP425_GPIO_GPDBSELR IXP425_GPIO_REG(IXP425_GPIO_GPDBSELR_OFFSET) - -#define IXP425_GPIO_GPITR(line) (((line) >= 8) ? \ - IXP425_GPIO_GPIT2R : IXP425_GPIO_GPIT1R) - -/* - * Macros to make it easy to access the GPIO registers - */ -#define GPIO_OUTPUT_ENABLE(line) *IXP425_GPIO_GPOER &= ~(1 << (line)) -#define GPIO_OUTPUT_DISABLE(line) *IXP425_GPIO_GPOER |= (1 << (line)) -#define GPIO_OUTPUT_SET(line) *IXP425_GPIO_GPOUTR |= (1 << (line)) -#define GPIO_OUTPUT_CLEAR(line) *IXP425_GPIO_GPOUTR &= ~(1 << (line)) -#define GPIO_INT_ACT_LOW_SET(line) \ - *IXP425_GPIO_GPITR(line) = \ - (*IXP425_GPIO_GPITR(line) & \ - ~(0x7 << (((line) & 0x7) * 3))) | \ - (0x1 << (((line) & 0x7) * 3)) \ - -/* - * Constants to make it easy to access Timer Control/Status registers - */ -#define IXP425_OSTS_OFFSET 0x00 /* Continious TimeStamp */ -#define IXP425_OST1_OFFSET 0x04 /* Timer 1 Timestamp */ -#define IXP425_OSRT1_OFFSET 0x08 /* Timer 1 Reload */ -#define IXP425_OST2_OFFSET 0x0C /* Timer 2 Timestamp */ -#define IXP425_OSRT2_OFFSET 0x10 /* Timer 2 Reload */ -#define IXP425_OSWT_OFFSET 0x14 /* Watchdog Timer */ -#define IXP425_OSWE_OFFSET 0x18 /* Watchdog Enable */ -#define IXP425_OSWK_OFFSET 0x1C /* Watchdog Key */ -#define IXP425_OSST_OFFSET 0x20 /* Timer Status */ - -/* - * Operating System Timer Register Definitions. - */ - -#ifndef __ASSEMBLY__ -#define IXP425_TIMER_REG(x) ((volatile u32 *)(IXP425_TIMER_BASE_PHYS+(x))) -#else -#define IXP425_TIMER_REG(x) (IXP425_TIMER_BASE_PHYS+(x)) -#endif - -/* _B to avoid collision: also defined in npe/include/... */ -#define IXP425_OSTS_B IXP425_TIMER_REG(IXP425_OSTS_OFFSET) -#define IXP425_OST1 IXP425_TIMER_REG(IXP425_OST1_OFFSET) -#define IXP425_OSRT1 IXP425_TIMER_REG(IXP425_OSRT1_OFFSET) -#define IXP425_OST2 IXP425_TIMER_REG(IXP425_OST2_OFFSET) -#define IXP425_OSRT2 IXP425_TIMER_REG(IXP425_OSRT2_OFFSET) -#define IXP425_OSWT IXP425_TIMER_REG(IXP425_OSWT_OFFSET) -#define IXP425_OSWE IXP425_TIMER_REG(IXP425_OSWE_OFFSET) -#define IXP425_OSWK IXP425_TIMER_REG(IXP425_OSWK_OFFSET) -#define IXP425_OSST IXP425_TIMER_REG(IXP425_OSST_OFFSET) - -/* - * Timer register values and bit definitions - */ -#define IXP425_OST_ENABLE BIT(0) -#define IXP425_OST_ONE_SHOT BIT(1) -/* Low order bits of reload value ignored */ -#define IXP425_OST_RELOAD_MASK (0x3) -#define IXP425_OST_DISABLED (0x0) -#define IXP425_OSST_TIMER_1_PEND BIT(0) -#define IXP425_OSST_TIMER_2_PEND BIT(1) -#define IXP425_OSST_TIMER_TS_PEND BIT(2) -#define IXP425_OSST_TIMER_WDOG_PEND BIT(3) -#define IXP425_OSST_TIMER_WARM_RESET BIT(4) - -/* - * Constants to make it easy to access PCI Control/Status registers - */ -#define PCI_NP_AD_OFFSET 0x00 -#define PCI_NP_CBE_OFFSET 0x04 -#define PCI_NP_WDATA_OFFSET 0x08 -#define PCI_NP_RDATA_OFFSET 0x0c -#define PCI_CRP_AD_CBE_OFFSET 0x10 -#define PCI_CRP_WDATA_OFFSET 0x14 -#define PCI_CRP_RDATA_OFFSET 0x18 -#define PCI_CSR_OFFSET 0x1c -#define PCI_ISR_OFFSET 0x20 -#define PCI_INTEN_OFFSET 0x24 -#define PCI_DMACTRL_OFFSET 0x28 -#define PCI_AHBMEMBASE_OFFSET 0x2c -#define PCI_AHBIOBASE_OFFSET 0x30 -#define PCI_PCIMEMBASE_OFFSET 0x34 -#define PCI_AHBDOORBELL_OFFSET 0x38 -#define PCI_PCIDOORBELL_OFFSET 0x3C -#define PCI_ATPDMA0_AHBADDR_OFFSET 0x40 -#define PCI_ATPDMA0_PCIADDR_OFFSET 0x44 -#define PCI_ATPDMA0_LENADDR_OFFSET 0x48 -#define PCI_ATPDMA1_AHBADDR_OFFSET 0x4C -#define PCI_ATPDMA1_PCIADDR_OFFSET 0x50 -#define PCI_ATPDMA1_LENADDR_OFFSET 0x54 - -/* - * PCI Control/Status Registers - */ -#define IXP425_PCI_CSR(x) ((volatile u32 *)(IXP425_PCI_CFG_BASE_PHYS+(x))) - -#define PCI_NP_AD IXP425_PCI_CSR(PCI_NP_AD_OFFSET) -#define PCI_NP_CBE IXP425_PCI_CSR(PCI_NP_CBE_OFFSET) -#define PCI_NP_WDATA IXP425_PCI_CSR(PCI_NP_WDATA_OFFSET) -#define PCI_NP_RDATA IXP425_PCI_CSR(PCI_NP_RDATA_OFFSET) -#define PCI_CRP_AD_CBE IXP425_PCI_CSR(PCI_CRP_AD_CBE_OFFSET) -#define PCI_CRP_WDATA IXP425_PCI_CSR(PCI_CRP_WDATA_OFFSET) -#define PCI_CRP_RDATA IXP425_PCI_CSR(PCI_CRP_RDATA_OFFSET) -#define PCI_CSR IXP425_PCI_CSR(PCI_CSR_OFFSET) -#define PCI_ISR IXP425_PCI_CSR(PCI_ISR_OFFSET) -#define PCI_INTEN IXP425_PCI_CSR(PCI_INTEN_OFFSET) -#define PCI_DMACTRL IXP425_PCI_CSR(PCI_DMACTRL_OFFSET) -#define PCI_AHBMEMBASE IXP425_PCI_CSR(PCI_AHBMEMBASE_OFFSET) -#define PCI_AHBIOBASE IXP425_PCI_CSR(PCI_AHBIOBASE_OFFSET) -#define PCI_PCIMEMBASE IXP425_PCI_CSR(PCI_PCIMEMBASE_OFFSET) -#define PCI_AHBDOORBELL IXP425_PCI_CSR(PCI_AHBDOORBELL_OFFSET) -#define PCI_PCIDOORBELL IXP425_PCI_CSR(PCI_PCIDOORBELL_OFFSET) -#define PCI_ATPDMA0_AHBADDR IXP425_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET) -#define PCI_ATPDMA0_PCIADDR IXP425_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET) -#define PCI_ATPDMA0_LENADDR IXP425_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET) -#define PCI_ATPDMA1_AHBADDR IXP425_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET) -#define PCI_ATPDMA1_PCIADDR IXP425_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET) -#define PCI_ATPDMA1_LENADDR IXP425_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET) - -/* - * PCI register values and bit definitions - */ - -/* CSR bit definitions */ -#define PCI_CSR_HOST BIT(0) -#define PCI_CSR_ARBEN BIT(1) -#define PCI_CSR_ADS BIT(2) -#define PCI_CSR_PDS BIT(3) -#define PCI_CSR_ABE BIT(4) -#define PCI_CSR_DBT BIT(5) -#define PCI_CSR_ASE BIT(8) -#define PCI_CSR_IC BIT(15) - -/* ISR (Interrupt status) Register bit definitions */ -#define PCI_ISR_PSE BIT(0) -#define PCI_ISR_PFE BIT(1) -#define PCI_ISR_PPE BIT(2) -#define PCI_ISR_AHBE BIT(3) -#define PCI_ISR_APDC BIT(4) -#define PCI_ISR_PADC BIT(5) -#define PCI_ISR_ADB BIT(6) -#define PCI_ISR_PDB BIT(7) - -/* INTEN (Interrupt Enable) Register bit definitions */ -#define PCI_INTEN_PSE BIT(0) -#define PCI_INTEN_PFE BIT(1) -#define PCI_INTEN_PPE BIT(2) -#define PCI_INTEN_AHBE BIT(3) -#define PCI_INTEN_APDC BIT(4) -#define PCI_INTEN_PADC BIT(5) -#define PCI_INTEN_ADB BIT(6) -#define PCI_INTEN_PDB BIT(7) - -/* - * Shift value for byte enable on NP cmd/byte enable register - */ -#define IXP425_PCI_NP_CBE_BESL 4 - -/* - * PCI commands supported by NP access unit - */ -#define NP_CMD_IOREAD 0x2 -#define NP_CMD_IOWRITE 0x3 -#define NP_CMD_CONFIGREAD 0xa -#define NP_CMD_CONFIGWRITE 0xb -#define NP_CMD_MEMREAD 0x6 -#define NP_CMD_MEMWRITE 0x7 - -#if 0 -#ifndef __ASSEMBLY__ -extern int ixp425_pci_read(u32 addr, u32 cmd, u32* data); -extern int ixp425_pci_write(u32 addr, u32 cmd, u32 data); -extern void ixp425_pci_init(void *); -#endif -#endif - -/* - * Constants for CRP access into local config space - */ -#define CRP_AD_CBE_BESL 20 -#define CRP_AD_CBE_WRITE BIT(16) - -/* - * Clock Speed Definitions. - */ -#define IXP425_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS */ - - -#endif diff --git a/arch/arm/include/asm/arch-ixp/ixp425pci.h b/arch/arm/include/asm/arch-ixp/ixp425pci.h deleted file mode 100644 index f499883..0000000 --- a/arch/arm/include/asm/arch-ixp/ixp425pci.h +++ /dev/null @@ -1,174 +0,0 @@ -/* - * IXP PCI Init - * (C) Copyright 2004 eslab.whut.edu.cn - * Yue Hu(huyue_whut@yahoo.com.cn), Ligong Xue(lgxue@hotmail.com) - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _IXP425PCI_H -#define _IXP425PCI_H - -#define OK 0 -#define ERROR -1 - -struct pci_controller; -extern void pci_ixp_init(struct pci_controller *hose); - -/* Mask definitions*/ -#define IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK 0x0000000f - -#define PCI_NP_CBE_BESL (4) -#define PCI_NP_AD_FUNCSL (8) - -/*Register addressing definitions for PCI controller configuration - and status registers*/ - -#define PCI_CSR_BASE (0xC0000000) -/* -#define PCI_NP_AD_OFFSET (0x00) -#define PCI_NP_CBE_OFFSET (0x04) -#define PCI_NP_WDATA_OFFSET (0x08) -#define PCI_NP_RDATA_OFFSET (0x0C) -#define PCI_CRP_OFFSET (0x10) -#define PCI_CRP_WDATA_OFFSET (0x14) -#define PCI_CRP_RDATA_OFFSET (0x18) -#define PCI_CSR_OFFSET (0x1C) -#define PCI_ISR_OFFSET (0x20) -#define PCI_INTEN_OFFSET (0x24) -#define PCI_DMACTRL_OFFSET (0x28) -#define PCI_AHBMEMBASE_OFFSET (0x2C) -#define PCI_AHBIOBASE_OFFSET (0x30) -#define PCI_PCIMEMBASE_OFFSET (0x34) -#define PCI_AHBDOORBELL_OFFSET (0x38) -#define PCI_PCIDOORBELL_OFFSET (0x3C) -#define PCI_ATPDMA0_AHBADDR (0x40) -#define PCI_ATPDMA0_PCIADDR (0x44) -#define PCI_ATPDMA0_LENADDR (0x48) -#define PCI_ATPDMA1_AHBADDR (0x4C) -#define PCI_ATPDMA1_PCIADDR (0x50) -#define PCI_ATPDMA1_LENADDR (0x54) -#define PCI_PTADMA0_AHBADDR (0x58) -#define PCI_PTADMA0_PCIADDR (0x5C) -#define PCI_PTADMA0_LENADDR (0x60) -#define PCI_PTADMA1_AHBADDR (0x64) -#define PCI_PTADMA1_PCIADDR (0x68) -#define PCI_PTADMA1_LENADDR (0x6C) -*/ -/*Non prefetch registers bit definitions*/ -/* -#define NP_CMD_INTACK (0x0) -#define NP_CMD_SPECIAL (0x1) -#define NP_CMD_IOREAD (0x2) -#define NP_CMD_IOWRITE (0x3) -#define NP_CMD_MEMREAD (0x6) -#define NP_CMD_MEMWRITE (0x7) -#define NP_CMD_CONFIGREAD (0xa) -#define NP_CMD_CONFIGWRITE (0xb) -*/ - -/*Configuration Port register bit definitions*/ -#define PCI_CRP_WRITE BIT(16) - -/*ISR (Interrupt status) Register bit definitions*/ -#define PCI_ISR_PSE BIT(0) -#define PCI_ISR_PFE BIT(1) -#define PCI_ISR_PPE BIT(2) -#define PCI_ISR_AHBE BIT(3) -#define PCI_ISR_APDC BIT(4) -#define PCI_ISR_PADC BIT(5) -#define PCI_ISR_ADB BIT(6) -#define PCI_ISR_PDB BIT(7) - -/*INTEN (Interrupt Enable) Register bit definitions*/ -#define PCI_INTEN_PSE BIT(0) -#define PCI_INTEN_PFE BIT(1) -#define PCI_INTEN_PPE BIT(2) -#define PCI_INTEN_AHBE BIT(3) -#define PCI_INTEN_APDC BIT(4) -#define PCI_INTEN_PADC BIT(5) -#define PCI_INTEN_ADB BIT(6) -#define PCI_INTEN_PDB BIT(7) - -/*PCI configuration regs.*/ - -#define PCI_CFG_VENDOR_ID 0x00 -#define PCI_CFG_DEVICE_ID 0x02 -#define PCI_CFG_COMMAND 0x04 -#define PCI_CFG_STATUS 0x06 -#define PCI_CFG_REVISION 0x08 -#define PCI_CFG_PROGRAMMING_IF 0x09 -#define PCI_CFG_SUBCLASS 0x0a -#define PCI_CFG_CLASS 0x0b -#define PCI_CFG_CACHE_LINE_SIZE 0x0c -#define PCI_CFG_LATENCY_TIMER 0x0d -#define PCI_CFG_HEADER_TYPE 0x0e -#define PCI_CFG_BIST 0x0f -#define PCI_CFG_BASE_ADDRESS_0 0x10 -#define PCI_CFG_BASE_ADDRESS_1 0x14 -#define PCI_CFG_BASE_ADDRESS_2 0x18 -#define PCI_CFG_BASE_ADDRESS_3 0x1c -#define PCI_CFG_BASE_ADDRESS_4 0x20 -#define PCI_CFG_BASE_ADDRESS_5 0x24 -#define PCI_CFG_CIS 0x28 -#define PCI_CFG_SUB_VENDOR_ID 0x2c -#define PCI_CFG_SUB_SYSTEM_ID 0x2e -#define PCI_CFG_EXPANSION_ROM 0x30 -#define PCI_CFG_RESERVED_0 0x34 -#define PCI_CFG_RESERVED_1 0x38 -#define PCI_CFG_DEV_INT_LINE 0x3c -#define PCI_CFG_DEV_INT_PIN 0x3d -#define PCI_CFG_MIN_GRANT 0x3e -#define PCI_CFG_MAX_LATENCY 0x3f -#define PCI_CFG_SPECIAL_USE 0x41 -#define PCI_CFG_MODE 0x43 - -#define PCI_CMD_IO_ENABLE 0x0001 /* IO access enable */ -#define PCI_CMD_MEM_ENABLE 0x0002 /* memory access enable */ -#define PCI_CMD_MASTER_ENABLE 0x0004 /* bus master enable */ -#define PCI_CMD_MON_ENABLE 0x0008 /* monitor special cycles enable */ -#define PCI_CMD_WI_ENABLE 0x0010 /* write and invalidate enable */ -#define PCI_CMD_SNOOP_ENABLE 0x0020 /* palette snoop enable */ -#define PCI_CMD_PERR_ENABLE 0x0040 /* parity error enable */ -#define PCI_CMD_WC_ENABLE 0x0080 /* wait cycle enable */ -#define PCI_CMD_SERR_ENABLE 0x0100 /* system error enable */ -#define PCI_CMD_FBTB_ENABLE 0x0200 /* fast back to back enable */ - - -/*CSR Register bit definitions*/ -#define PCI_CSR_HOST BIT(0) -#define PCI_CSR_ARBEN BIT(1) -#define PCI_CSR_ADS BIT(2) -#define PCI_CSR_PDS BIT(3) -#define PCI_CSR_ABE BIT(4) -#define PCI_CSR_DBT BIT(5) -#define PCI_CSR_ASE BIT(8) -#define PCI_CSR_IC BIT(15) - -/*Configuration command bit definitions*/ -#define PCI_CFG_CMD_IOAE BIT(0) -#define PCI_CFG_CMD_MAE BIT(1) -#define PCI_CFG_CMD_BME BIT(2) -#define PCI_CFG_CMD_MWIE BIT(4) -#define PCI_CFG_CMD_SER BIT(8) -#define PCI_CFG_CMD_FBBE BIT(9) -#define PCI_CFG_CMD_MDPE BIT(24) -#define PCI_CFG_CMD_STA BIT(27) -#define PCI_CFG_CMD_RTA BIT(28) -#define PCI_CFG_CMD_RMA BIT(29) -#define PCI_CFG_CMD_SSE BIT(30) -#define PCI_CFG_CMD_DPE BIT(31) - -/*DMACTRL DMA Control and status Register*/ -#define PCI_DMACTRL_APDCEN BIT(0) -#define PCI_DMACTRL_APDC0 BIT(4) -#define PCI_DMACTRL_APDE0 BIT(5) -#define PCI_DMACTRL_APDC1 BIT(6) -#define PCI_DMACTRL_APDE1 BIT(7) -#define PCI_DMACTRL_PADCEN BIT(8) -#define PCI_DMACTRL_PADC0 BIT(12) -#define PCI_DMACTRL_PADE0 BIT(13) -#define PCI_DMACTRL_PADC1 BIT(14) -#define PCI_DMACTRL_PADE1 BIT(15) - -#endif diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h index 4955ccf..054c680 100644 --- a/arch/arm/include/asm/arch-mx5/imx-regs.h +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h @@ -230,9 +230,10 @@ #define MXC_CSPICTRL_CHAN 18 /* Bit position inside CON register to be associated with SS */ -#define MXC_CSPICON_POL 4 -#define MXC_CSPICON_PHA 0 -#define MXC_CSPICON_SSPOL 12 +#define MXC_CSPICON_PHA 0 /* SCLK phase control */ +#define MXC_CSPICON_POL 4 /* SCLK polarity */ +#define MXC_CSPICON_SSPOL 12 /* SS polarity */ +#define MXC_CSPICON_CTL 20 /* inactive state of SCLK */ #define MXC_SPI_BASE_ADDRESSES \ CSPI1_BASE_ADDR, \ CSPI2_BASE_ADDR, \ diff --git a/arch/arm/include/asm/arch-mx5/sys_proto.h b/arch/arm/include/asm/arch-mx5/sys_proto.h index 9949ad1..ac7705b 100644 --- a/arch/arm/include/asm/arch-mx5/sys_proto.h +++ b/arch/arm/include/asm/arch-mx5/sys_proto.h @@ -8,12 +8,7 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ -#define MXC_CPU_MX51 0x51 -#define MXC_CPU_MX53 0x53 -#define MXC_CPU_MX6SL 0x60 -#define MXC_CPU_MX6DL 0x61 -#define MXC_CPU_MX6SOLO 0x62 -#define MXC_CPU_MX6Q 0x63 +#include "../arch-imx/cpu.h" #define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev) u32 get_cpu_rev(void); diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h index e31ba0a..1b4ded7 100644 --- a/arch/arm/include/asm/arch-mx6/clock.h +++ b/arch/arm/include/asm/arch-mx6/clock.h @@ -55,6 +55,7 @@ unsigned int mxc_get_clock(enum mxc_clock clk); void enable_ocotp_clk(unsigned char enable); void enable_usboh3_clk(unsigned char enable); int enable_sata_clock(void); +int enable_pcie_clock(void); int enable_i2c_clk(unsigned char enable, unsigned i2c_num); void enable_ipu_clock(void); int enable_fec_anatop_clock(enum enet_freq freq); diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index f2ad6e9..1f19727 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -53,6 +53,7 @@ #define GLOBAL_TIMER_BASE_ADDR 0x00A00200 #define PRIVATE_TIMERS_WD_BASE_ADDR 0x00A00600 #define IC_DISTRIBUTOR_BASE_ADDR 0x00A01000 +#define L2_PL310_BASE 0x00A02000 #define GPV0_BASE_ADDR 0x00B00000 #define GPV1_BASE_ADDR 0x00C00000 #define PCIE_ARB_BASE_ADDR 0x01000000 @@ -405,10 +406,11 @@ struct cspi_regs { #define MXC_CSPICTRL_CHAN 18 /* Bit position inside CON register to be associated with SS */ -#define MXC_CSPICON_POL 4 -#define MXC_CSPICON_PHA 0 -#define MXC_CSPICON_SSPOL 12 -#ifdef CONFIG_MX6SL +#define MXC_CSPICON_PHA 0 /* SCLK phase control */ +#define MXC_CSPICON_POL 4 /* SCLK polarity */ +#define MXC_CSPICON_SSPOL 12 /* SS polarity */ +#define MXC_CSPICON_CTL 20 /* inactive state of SCLK */ +#if defined(CONFIG_MX6SL) || defined(CONFIG_MX6DL) #define MXC_SPI_BASE_ADDRESSES \ ECSPI1_BASE_ADDR, \ ECSPI2_BASE_ADDR, \ diff --git a/arch/arm/include/asm/arch-mx6/iomux.h b/arch/arm/include/asm/arch-mx6/iomux.h index fe4675e..f9ee0d9 100644 --- a/arch/arm/include/asm/arch-mx6/iomux.h +++ b/arch/arm/include/asm/arch-mx6/iomux.h @@ -15,6 +15,33 @@ #define IOMUXC_GPR1_OTG_ID_ENET_RX_ERR (0<<13) #define IOMUXC_GPR1_OTG_ID_GPIO1 (1<<13) #define IOMUXC_GPR1_OTG_ID_MASK (1<<13) +#define IOMUXC_GPR1_REF_SSP_EN (1 << 16) +#define IOMUXC_GPR1_TEST_POWERDOWN (1 << 18) + +/* + * IOMUXC_GPR8 bit fields + */ +#define IOMUXC_GPR8_PCS_TX_DEEMPH_GEN1_MASK (0x3f << 0) +#define IOMUXC_GPR8_PCS_TX_DEEMPH_GEN1_OFFSET 0 +#define IOMUXC_GPR8_PCS_TX_DEEMPH_GEN2_3P5DB_MASK (0x3f << 6) +#define IOMUXC_GPR8_PCS_TX_DEEMPH_GEN2_3P5DB_OFFSET 6 +#define IOMUXC_GPR8_PCS_TX_DEEMPH_GEN2_6DB_MASK (0x3f << 12) +#define IOMUXC_GPR8_PCS_TX_DEEMPH_GEN2_6DB_OFFSET 12 +#define IOMUXC_GPR8_PCS_TX_SWING_FULL_MASK (0x7f << 18) +#define IOMUXC_GPR8_PCS_TX_SWING_FULL_OFFSET 18 +#define IOMUXC_GPR8_PCS_TX_SWING_LOW_MASK (0x7f << 25) +#define IOMUXC_GPR8_PCS_TX_SWING_LOW_OFFSET 25 + +/* + * IOMUXC_GPR12 bit fields + */ +#define IOMUXC_GPR12_LOS_LEVEL_9 (0x9 << 4) +#define IOMUXC_GPR12_LOS_LEVEL_MASK (0x1f << 4) +#define IOMUXC_GPR12_APPS_LTSSM_ENABLE (1 << 10) +#define IOMUXC_GPR12_DEVICE_TYPE_EP (0x0 << 12) +#define IOMUXC_GPR12_DEVICE_TYPE_RC (0x2 << 12) +#define IOMUXC_GPR12_DEVICE_TYPE_MASK (0xf << 12) + /* * IOMUXC_GPR13 bit fields */ diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h index 55cc9ad..2e414ad 100644 --- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h @@ -647,7 +647,7 @@ MX6_PAD_DECL(ENET_MDIO__ESAI_RX_CLK, 0x05BC, 0x01EC, 2, 0x083C, 0, 0) MX6_PAD_DECL(ENET_MDIO__ENET_1588_EVENT1_OUT, 0x05BC, 0x01EC, 4, 0x0000, 0, 0) MX6_PAD_DECL(ENET_MDIO__GPIO1_IO22, 0x05BC, 0x01EC, 5, 0x0000, 0, 0) MX6_PAD_DECL(ENET_MDIO__SPDIF_LOCK, 0x05BC, 0x01EC, 6, 0x0000, 0, 0) -MX6_PAD_DECL(ENET_REF_CLK__ENET_TX_CLK, 0x05C0, 0x01F0, 1, 0x0000, 0, 0) +MX6_PAD_DECL(ENET_REF_CLK__ENET_TX_CLK, 0x05C0, 0x01F0, 1 | IOMUX_CONFIG_SION, 0x0000, 0, 0) MX6_PAD_DECL(ENET_REF_CLK__ESAI_RX_FS, 0x05C0, 0x01F0, 2, 0x082C, 0, 0) MX6_PAD_DECL(ENET_REF_CLK__GPIO1_IO23, 0x05C0, 0x01F0, 5, 0x0000, 0, 0) MX6_PAD_DECL(ENET_REF_CLK__SPDIF_SR_CLK, 0x05C0, 0x01F0, 6, 0x0000, 0, 0) @@ -695,7 +695,7 @@ MX6_PAD_DECL(GPIO_1__GPIO1_IO01, 0x05E0, 0x0210, 5, 0x0000, 0, 0) MX6_PAD_DECL(GPIO_1__SD1_CD_B, 0x05E0, 0x0210, 6, 0x0000, 0, 0) MX6_PAD_DECL(GPIO_16__ESAI_TX3_RX2, 0x05E4, 0x0214, 0, 0x0850, 1, 0) MX6_PAD_DECL(GPIO_16__ENET_1588_EVENT2_IN, 0x05E4, 0x0214, 1, 0x0000, 0, 0) -MX6_PAD_DECL(GPIO_16__ENET_REF_CLK, 0x05E4, 0x0214, 2, 0x080C, 0, 0) +MX6_PAD_DECL(GPIO_16__ENET_REF_CLK, 0x05E4, 0x0214, 2 | IOMUX_CONFIG_SION, 0x080C, 0, 0) MX6_PAD_DECL(GPIO_16__SD1_LCTL, 0x05E4, 0x0214, 3, 0x0000, 0, 0) MX6_PAD_DECL(GPIO_16__SPDIF_IN, 0x05E4, 0x0214, 4, 0x08F0, 2, 0) MX6_PAD_DECL(GPIO_16__GPIO7_IO11, 0x05E4, 0x0214, 5, 0x0000, 0, 0) @@ -934,7 +934,7 @@ MX6_PAD_DECL(RGMII_TX_CTL__USBOH3_H2_STROBE, 0x06BC, 0x02D4, 0 | IOMUX_CONFIG_SI MX6_PAD_DECL(RGMII_TX_CTL__USB_H2_STROBE, 0x06BC, 0x02D4, 0 | IOMUX_CONFIG_SION, 0x0000, 0, PAD_CTL_PUS_47K_UP) MX6_PAD_DECL(RGMII_TX_CTL__RGMII_TX_CTL, 0x06BC, 0x02D4, 1, 0x0000, 0, 0) MX6_PAD_DECL(RGMII_TX_CTL__GPIO6_IO26, 0x06BC, 0x02D4, 5, 0x0000, 0, 0) -MX6_PAD_DECL(RGMII_TX_CTL__ENET_REF_CLK, 0x06BC, 0x02D4, 7, 0x080C, 1, 0) +MX6_PAD_DECL(RGMII_TX_CTL__ENET_REF_CLK, 0x06BC, 0x02D4, 7 | IOMUX_CONFIG_SION, 0x080C, 1, 0) MX6_PAD_DECL(RGMII_TXC__USB_H2_DATA, 0x06C0, 0x02D8, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0) MX6_PAD_DECL(RGMII_TXC__RGMII_TXC, 0x06C0, 0x02D8, 1, 0x0000, 0, 0) MX6_PAD_DECL(RGMII_TXC__SPDIF_EXT_CLK, 0x06C0, 0x02D8, 2, 0x08F4, 1, 0) diff --git a/arch/arm/include/asm/arch-mx6/mx6q_pins.h b/arch/arm/include/asm/arch-mx6/mx6q_pins.h index ad31c33..a8456a2 100644 --- a/arch/arm/include/asm/arch-mx6/mx6q_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6q_pins.h @@ -53,7 +53,7 @@ MX6_PAD_DECL(RGMII_RD0__GPIO6_IO25, 0x0384, 0x0070, 5, 0x0000, 0, 0) MX6_PAD_DECL(RGMII_TX_CTL__USB_H2_STROBE, 0x0388, 0x0074, 0, 0x0000, 0, 0) MX6_PAD_DECL(RGMII_TX_CTL__RGMII_TX_CTL, 0x0388, 0x0074, 1, 0x0000, 0, 0) MX6_PAD_DECL(RGMII_TX_CTL__GPIO6_IO26, 0x0388, 0x0074, 5, 0x0000, 0, 0) -MX6_PAD_DECL(RGMII_TX_CTL__ENET_REF_CLK, 0x0388, 0x0074, 7, 0x083C, 0, 0) +MX6_PAD_DECL(RGMII_TX_CTL__ENET_REF_CLK, 0x0388, 0x0074, 7 | IOMUX_CONFIG_SION, 0x083C, 0, 0) MX6_PAD_DECL(RGMII_RD1__HSI_TX_FLAG, 0x038C, 0x0078, 0, 0x0000, 0, 0) MX6_PAD_DECL(RGMII_RD1__RGMII_RD1, 0x038C, 0x0078, 1, 0x084C, 0, 0) MX6_PAD_DECL(RGMII_RD1__GPIO6_IO27, 0x038C, 0x0078, 5, 0x0000, 0, 0) @@ -523,7 +523,7 @@ MX6_PAD_DECL(ENET_MDIO__ESAI_RX_CLK, 0x04E4, 0x01D0, 2, 0x086C, 0, 0) MX6_PAD_DECL(ENET_MDIO__ENET_1588_EVENT1_OUT, 0x04E4, 0x01D0, 4, 0x0000, 0, 0) MX6_PAD_DECL(ENET_MDIO__GPIO1_IO22, 0x04E4, 0x01D0, 5, 0x0000, 0, 0) MX6_PAD_DECL(ENET_MDIO__SPDIF_LOCK, 0x04E4, 0x01D0, 6, 0x0000, 0, 0) -MX6_PAD_DECL(ENET_REF_CLK__ENET_TX_CLK, 0x04E8, 0x01D4, 1, 0x0000, 0, 0) +MX6_PAD_DECL(ENET_REF_CLK__ENET_TX_CLK, 0x04E8, 0x01D4, 1 | IOMUX_CONFIG_SION, 0x0000, 0, 0) MX6_PAD_DECL(ENET_REF_CLK__ESAI_RX_FS, 0x04E8, 0x01D4, 2, 0x085C, 0, 0) MX6_PAD_DECL(ENET_REF_CLK__GPIO1_IO23, 0x04E8, 0x01D4, 5, 0x0000, 0, 0) MX6_PAD_DECL(ENET_REF_CLK__SPDIF_SR_CLK, 0x04E8, 0x01D4, 6, 0x0000, 0, 0) @@ -703,7 +703,7 @@ MX6_PAD_DECL(GPIO_8__SPDIF_SR_CLK, 0x0614, 0x0244, 6, 0x0000, 0, 0) MX6_PAD_DECL(GPIO_8__USB_OTG_PWR_CTL_WAKE, 0x0614, 0x0244, 7, 0x0000, 0, 0) MX6_PAD_DECL(GPIO_16__ESAI_TX3_RX2, 0x0618, 0x0248, 0, 0x0880, 1, 0) MX6_PAD_DECL(GPIO_16__ENET_1588_EVENT2_IN, 0x0618, 0x0248, 1, 0x0000, 0, 0) -MX6_PAD_DECL(GPIO_16__ENET_REF_CLK, 0x0618, 0x0248, 2, 0x083C, 1, 0) +MX6_PAD_DECL(GPIO_16__ENET_REF_CLK, 0x0618, 0x0248, 2 | IOMUX_CONFIG_SION, 0x083C, 1, 0) MX6_PAD_DECL(GPIO_16__SD1_LCTL, 0x0618, 0x0248, 3, 0x0000, 0, 0) MX6_PAD_DECL(GPIO_16__SPDIF_IN, 0x0618, 0x0248, 4, 0x0914, 3, 0) MX6_PAD_DECL(GPIO_16__GPIO7_IO11, 0x0618, 0x0248, 5, 0x0000, 0, 0) diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h index 17125a6..38851a1 100644 --- a/arch/arm/include/asm/arch-mx6/sys_proto.h +++ b/arch/arm/include/asm/arch-mx6/sys_proto.h @@ -9,13 +9,7 @@ #define _SYS_PROTO_H_ #include <asm/imx-common/regs-common.h> - -#define MXC_CPU_MX51 0x51 -#define MXC_CPU_MX53 0x53 -#define MXC_CPU_MX6SL 0x60 -#define MXC_CPU_MX6DL 0x61 -#define MXC_CPU_MX6SOLO 0x62 -#define MXC_CPU_MX6Q 0x63 +#include "../arch-imx/cpu.h" #define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev) u32 get_cpu_rev(void); diff --git a/arch/arm/include/asm/arch-omap3/omap3.h b/arch/arm/include/asm/arch-omap3/omap3.h index 65a5995..194b93b 100644 --- a/arch/arm/include/asm/arch-omap3/omap3.h +++ b/arch/arm/include/asm/arch-omap3/omap3.h @@ -140,13 +140,13 @@ struct gpio { SRAM_OFFSET2) #define SRAM_CLK_CODE (SRAM_VECT_CODE + 64) -#define OMAP3_PUBLIC_SRAM_BASE 0x40208000 /* Works for GP & EMU */ -#define OMAP3_PUBLIC_SRAM_END 0x40210000 +#define NON_SECURE_SRAM_START 0x40208000 /* Works for GP & EMU */ +#define NON_SECURE_SRAM_END 0x40210000 #define LOW_LEVEL_SRAM_STACK 0x4020FFFC /* scratch area - accessible on both EMU and GP */ -#define OMAP3_PUBLIC_SRAM_SCRATCH_AREA OMAP3_PUBLIC_SRAM_BASE +#define OMAP3_PUBLIC_SRAM_SCRATCH_AREA NON_SECURE_SRAM_START #define DEBUG_LED1 149 /* gpio */ #define DEBUG_LED2 150 /* gpio */ diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h index ce8217f..fc94725 100644 --- a/arch/arm/include/asm/arch-omap4/sys_proto.h +++ b/arch/arm/include/asm/arch-omap4/sys_proto.h @@ -30,7 +30,6 @@ void watchdog_init(void); u32 get_device_type(void); void do_set_mux(u32 base, struct pad_conf_entry const *array, int size); void set_muxconf_regs_essential(void); -void set_muxconf_regs_non_essential(void); void sr32(void *, u32, u32, u32); u32 wait_on_value(u32, u32, void *, u32); void sdelay(unsigned long); diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index 590235b..19fdece 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -44,6 +44,7 @@ #define OMAP5432_CONTROL_ID_CODE_ES1_0 0x0B99802F #define OMAP5432_CONTROL_ID_CODE_ES2_0 0x1B99802F #define DRA752_CONTROL_ID_CODE_ES1_0 0x0B99002F +#define DRA752_CONTROL_ID_CODE_ES1_1 0x1B99002F /* UART */ #define UART1_BASE (OMAP54XX_L4_PER_BASE + 0x6a000) @@ -204,6 +205,8 @@ struct s32ktimer { /* ABB efuse masks */ #define OMAP5_ABB_FUSE_VSET_MASK (0x1F << 24) #define OMAP5_ABB_FUSE_ENABLE_MASK (0x1 << 29) +#define DRA7_ABB_FUSE_VSET_MASK (0x1F << 20) +#define DRA7_ABB_FUSE_ENABLE_MASK (0x1 << 25) #define OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK (0x1 << 10) #define OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK (0x1f << 0) diff --git a/arch/arm/include/asm/arch-omap5/sata.h b/arch/arm/include/asm/arch-omap5/sata.h index 2ca8947..b69165b 100644 --- a/arch/arm/include/asm/arch-omap5/sata.h +++ b/arch/arm/include/asm/arch-omap5/sata.h @@ -36,13 +36,4 @@ #define TI_SATA_IDLE_SMART_WAKE (0x3 << 2) #define TI_SATA_IDLE_SMART (0x2 << 2) -#ifdef CONFIG_SCSI_AHCI_PLAT -int omap_sata_init(void); -#else -static inline int omap_sata_init(void) -{ - return 0; -} -#endif /* CONFIG_SCSI_AHCI_PLAT */ - #endif /* _TI_SATA_H */ diff --git a/arch/arm/include/asm/arch-omap5/spl.h b/arch/arm/include/asm/arch-omap5/spl.h index 2d5a62e..4a279cf 100644 --- a/arch/arm/include/asm/arch-omap5/spl.h +++ b/arch/arm/include/asm/arch-omap5/spl.h @@ -15,6 +15,7 @@ #define BOOT_DEVICE_MMC1 5 #define BOOT_DEVICE_MMC2 6 #define BOOT_DEVICE_MMC2_2 7 +#define BOOT_DEVICE_SATA 9 #define BOOT_DEVICE_SPI 10 #define BOOT_DEVICE_UART 0x43 diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h index 9e70d48..43011a4 100644 --- a/arch/arm/include/asm/arch-omap5/sys_proto.h +++ b/arch/arm/include/asm/arch-omap5/sys_proto.h @@ -31,7 +31,6 @@ void watchdog_init(void); u32 get_device_type(void); void do_set_mux(u32 base, struct pad_conf_entry const *array, int size); void set_muxconf_regs_essential(void); -void set_muxconf_regs_non_essential(void); void sr32(void *, u32, u32, u32); u32 wait_on_value(u32, u32, void *, u32); void sdelay(unsigned long); diff --git a/arch/arm/include/asm/arch-s5pc1xx/cpu.h b/arch/arm/include/asm/arch-s5pc1xx/cpu.h index 4fc5a0c..5ae5c87 100644 --- a/arch/arm/include/asm/arch-s5pc1xx/cpu.h +++ b/arch/arm/include/asm/arch-s5pc1xx/cpu.h @@ -51,10 +51,17 @@ #include <asm/io.h> /* CPU detection macros */ extern unsigned int s5p_cpu_id; +extern unsigned int s5p_cpu_rev; + +static inline int s5p_get_cpu_rev(void) +{ + return s5p_cpu_rev; +} static inline void s5p_set_cpu_id(void) { s5p_cpu_id = readl(S5PC100_PRO_ID); + s5p_cpu_rev = s5p_cpu_id & 0x000000FF; s5p_cpu_id = 0xC000 | ((s5p_cpu_id & 0x00FFF000) >> 12); } diff --git a/arch/arm/include/asm/arch-s5pc1xx/gpio.h b/arch/arm/include/asm/arch-s5pc1xx/gpio.h index ac60fe6..da8df74 100644 --- a/arch/arm/include/asm/arch-s5pc1xx/gpio.h +++ b/arch/arm/include/asm/arch-s5pc1xx/gpio.h @@ -125,20 +125,45 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode); /* GPIO pins per bank */ #define GPIO_PER_BANK 8 -static inline unsigned int s5p_gpio_base(int nr) -{ - return S5PC110_GPIO_BASE; -} +#define S5P_GPIO_PART_SHIFT (24) +#define S5P_GPIO_PART_MASK (0xff) +#define S5P_GPIO_BANK_SHIFT (8) +#define S5P_GPIO_BANK_MASK (0xffff) +#define S5P_GPIO_PIN_MASK (0xff) + +#define S5P_GPIO_SET_PART(x) \ + (((x) & S5P_GPIO_PART_MASK) << S5P_GPIO_PART_SHIFT) + +#define S5P_GPIO_GET_PART(x) \ + (((x) >> S5P_GPIO_PART_SHIFT) & S5P_GPIO_PART_MASK) + +#define S5P_GPIO_SET_PIN(x) \ + ((x) & S5P_GPIO_PIN_MASK) -static inline unsigned int s5p_gpio_part_max(int nr) +#define S5PC100_SET_BANK(bank) \ + (((unsigned)&(((struct s5pc100_gpio *) \ + S5PC100_GPIO_BASE)->bank) - S5PC100_GPIO_BASE) \ + & S5P_GPIO_BANK_MASK) << S5P_GPIO_BANK_SHIFT) + +#define S5PC110_SET_BANK(bank) \ + ((((unsigned)&(((struct s5pc110_gpio *) \ + S5PC110_GPIO_BASE)->bank) - S5PC110_GPIO_BASE) \ + & S5P_GPIO_BANK_MASK) << S5P_GPIO_BANK_SHIFT) + +#define s5pc100_gpio_get(bank, pin) \ + (S5P_GPIO_SET_PART(0) | \ + S5PC100_SET_BANK(bank) | \ + S5P_GPIO_SET_PIN(pin)) + +#define s5pc110_gpio_get(bank, pin) \ + (S5P_GPIO_SET_PART(0) | \ + S5PC110_SET_BANK(bank) | \ + S5P_GPIO_SET_PIN(pin)) + +static inline unsigned int s5p_gpio_base(int nr) { - return 0; + return samsung_get_base_gpio(); } - -#define s5pc110_gpio_get_nr(bank, pin) \ - ((((((unsigned int)&(((struct s5pc110_gpio *)S5PC110_GPIO_BASE)->bank))\ - - S5PC110_GPIO_BASE) / sizeof(struct s5p_gpio_bank)) \ - * GPIO_PER_BANK) + pin) #endif /* Pin configurations */ diff --git a/arch/arm/include/asm/arch-spear/hardware.h b/arch/arm/include/asm/arch-spear/hardware.h index f3afd4d..c6da405 100644 --- a/arch/arm/include/asm/arch-spear/hardware.h +++ b/arch/arm/include/asm/arch-spear/hardware.h @@ -26,7 +26,6 @@ #define CONFIG_SYS_NAND_ALE (1 << 17) #if defined(CONFIG_SPEAR600) -#define CONFIG_SYS_I2C_BASE 0xD0200000 #define CONFIG_SYS_FSMC_BASE 0xD1800000 #define CONFIG_FSMC_NAND_BASE 0xD2000000 @@ -42,11 +41,9 @@ #define CONFIG_SPEAR_MPMCREGS 100 #elif defined(CONFIG_SPEAR300) -#define CONFIG_SYS_I2C_BASE 0xD0180000 #define CONFIG_SYS_FSMC_BASE 0x94000000 #elif defined(CONFIG_SPEAR310) -#define CONFIG_SYS_I2C_BASE 0xD0180000 #define CONFIG_SYS_FSMC_BASE 0x44000000 #undef CONFIG_SYS_NAND_CLE @@ -63,7 +60,6 @@ #define CONFIG_SYS_MACB3_BASE 0xB1800000 #elif defined(CONFIG_SPEAR320) -#define CONFIG_SYS_I2C_BASE 0xD0180000 #define CONFIG_SYS_FSMC_BASE 0x4C000000 #define CONFIG_SPEAR_EMIBASE 0x40000000 diff --git a/arch/arm/include/asm/arch-tegra/clk_rst.h b/arch/arm/include/asm/arch-tegra/clk_rst.h index 074b3bc..7d28e16 100644 --- a/arch/arm/include/asm/arch-tegra/clk_rst.h +++ b/arch/arm/include/asm/arch-tegra/clk_rst.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2010,2011 + * (C) Copyright 2010-2014 * NVIDIA Corporation <www.nvidia.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -11,7 +11,8 @@ /* PLL registers - there are several PLLs in the clock controller */ struct clk_pll { uint pll_base; /* the control register */ - uint pll_out[2]; /* output control */ + /* pll_out[0] is output A control, pll_out[1] is output B control */ + uint pll_out[2]; uint pll_misc; /* other misc things */ }; @@ -21,6 +22,13 @@ struct clk_pll_simple { uint pll_misc; /* other misc things */ }; +struct clk_pllm { + uint pllm_base; /* the control register */ + uint pllm_out; /* output control */ + uint pllm_misc1; /* misc1 */ + uint pllm_misc2; /* misc2 */ +}; + /* RST_DEV_(L,H,U,V,W)_(SET,CLR) and CLK_ENB_(L,H,U,V,W)_(SET,CLR) */ struct clk_set_clr { uint set; @@ -38,7 +46,8 @@ enum { TEGRA_CLK_REGS = 3, /* Number of clock enable regs L/H/U */ TEGRA_CLK_SOURCES = 64, /* Number of ppl clock sources L/H/U */ TEGRA_CLK_REGS_VW = 2, /* Number of clock enable regs V/W */ - TEGRA_CLK_SOURCES_VW = 32, /* Number of ppl clock sources V/W*/ + TEGRA_CLK_SOURCES_VW = 32, /* Number of ppl clock sources V/W */ + TEGRA_CLK_SOURCES_X = 32, /* Number of ppl clock sources X */ }; /* Clock/Reset Controller (CLK_RST_CONTROLLER_) regs */ @@ -47,7 +56,7 @@ struct clk_rst_ctlr { uint crc_rst_dev[TEGRA_CLK_REGS]; /* _RST_DEVICES_L/H/U_0 */ uint crc_clk_out_enb[TEGRA_CLK_REGS]; /* _CLK_OUT_ENB_L/H/U_0 */ uint crc_reserved0; /* reserved_0, 0x1C */ - uint crc_cclk_brst_pol; /* _CCLK_BURST_POLICY_0,0x20 */ + uint crc_cclk_brst_pol; /* _CCLK_BURST_POLICY_0, 0x20 */ uint crc_super_cclk_div; /* _SUPER_CCLK_DIVIDER_0,0x24 */ uint crc_sclk_brst_pol; /* _SCLK_BURST_POLICY_0, 0x28 */ uint crc_super_sclk_div; /* _SUPER_SCLK_DIVIDER_0,0x2C */ @@ -75,7 +84,21 @@ struct clk_rst_ctlr { uint crc_clk_src[TEGRA_CLK_SOURCES]; /*_I2S1_0... 0x100-1fc */ - uint crc_reserved20[64]; /* _reserved_20, 0x200-2fc */ + uint crc_reserved20[32]; /* _reserved_20, 0x200-27c */ + + uint crc_clk_out_enb_x; /* _CLK_OUT_ENB_X_0, 0x280 */ + uint crc_clk_enb_x_set; /* _CLK_ENB_X_SET_0, 0x284 */ + uint crc_clk_enb_x_clr; /* _CLK_ENB_X_CLR_0, 0x288 */ + + uint crc_rst_devices_x; /* _RST_DEVICES_X_0, 0x28c */ + uint crc_rst_dev_x_set; /* _RST_DEV_X_SET_0, 0x290 */ + uint crc_rst_dev_x_clr; /* _RST_DEV_X_CLR_0, 0x294 */ + + uint crc_reserved21[23]; /* _reserved_21, 0x298-2f0 */ + + uint crc_dfll_base; /* _DFLL_BASE_0, 0x2f4 */ + + uint crc_reserved22[2]; /* _reserved_22, 0x2f8-2fc */ /* _RST_DEV_L/H/U_SET_0 0x300 ~ 0x314 */ struct clk_set_clr crc_rst_dev_ex[TEGRA_CLK_REGS]; @@ -105,10 +128,10 @@ struct clk_rst_ctlr { uint crc_clk_cpug_cmplx; /* _CLK_CPUG_CMPLX_0, 0x378 */ uint crc_clk_cpulp_cmplx; /* _CLK_CPULP_CMPLX_0, 0x37C */ uint crc_cpu_softrst_ctrl; /* _CPU_SOFTRST_CTRL_0, 0x380 */ - uint crc_cpu_softrst_ctrl1; /* _CPU_SOFTRST_CTR1L_0, 0x384 */ + uint crc_cpu_softrst_ctrl1; /* _CPU_SOFTRST_CTRL1_0, 0x384 */ uint crc_cpu_softrst_ctrl2; /* _CPU_SOFTRST_CTRL2_0, 0x388 */ uint crc_reserved33[9]; /* _reserved_33, 0x38c-3ac */ - uint crc_clk_src_vw[TEGRA_CLK_SOURCES_VW]; /* _G3D2_0..., 0x3b0-0x42c */ + uint crc_clk_src_vw[TEGRA_CLK_SOURCES_VW]; /* 0x3B0-0x42C */ /* _RST_DEV_V/W_SET_0 0x430 ~ 0x43c */ struct clk_set_clr crc_rst_dev_ex_vw[TEGRA_CLK_REGS_VW]; /* _CLK_ENB_V/W_CLR_0 0x440 ~ 0x44c */ @@ -142,6 +165,47 @@ struct clk_rst_ctlr { uint crc_audio_sync_clk_i2s3; /* _AUDIO_SYNC_CLK_I2S3_0, 0x4AC */ uint crc_audio_sync_clk_i2s4; /* _AUDIO_SYNC_CLK_I2S4_0, 0x4B0 */ uint crc_audio_sync_clk_spdif; /* _AUDIO_SYNC_CLK_SPDIF_0, 0x4B4 */ + + uint crc_plld2_base; /* _PLLD2_BASE_0, 0x4B8 */ + uint crc_plld2_misc; /* _PLLD2_MISC_0, 0x4BC */ + uint crc_utmip_pll_cfg3; /* _UTMIP_PLL_CFG3_0, 0x4C0 */ + uint crc_pllrefe_base; /* _PLLREFE_BASE_0, 0x4C4 */ + uint crc_pllrefe_misc; /* _PLLREFE_MISC_0, 0x4C8 */ + uint crs_reserved_50[7]; /* _reserved_50, 0x4CC-0x4E4 */ + uint crc_pllc2_base; /* _PLLC2_BASE_0, 0x4E8 */ + uint crc_pllc2_misc0; /* _PLLC2_MISC_0_0, 0x4EC */ + uint crc_pllc2_misc1; /* _PLLC2_MISC_1_0, 0x4F0 */ + uint crc_pllc2_misc2; /* _PLLC2_MISC_2_0, 0x4F4 */ + uint crc_pllc2_misc3; /* _PLLC2_MISC_3_0, 0x4F8 */ + uint crc_pllc3_base; /* _PLLC3_BASE_0, 0x4FC */ + uint crc_pllc3_misc0; /* _PLLC3_MISC_0_0, 0x500 */ + uint crc_pllc3_misc1; /* _PLLC3_MISC_1_0, 0x504 */ + uint crc_pllc3_misc2; /* _PLLC3_MISC_2_0, 0x508 */ + uint crc_pllc3_misc3; /* _PLLC3_MISC_3_0, 0x50C */ + uint crc_pllx_misc1; /* _PLLX_MISC_1_0, 0x510 */ + uint crc_pllx_misc2; /* _PLLX_MISC_2_0, 0x514 */ + uint crc_pllx_misc3; /* _PLLX_MISC_3_0, 0x518 */ + uint crc_xusbio_pll_cfg0; /* _XUSBIO_PLL_CFG0_0, 0x51C */ + uint crc_xusbio_pll_cfg1; /* _XUSBIO_PLL_CFG0_1, 0x520 */ + uint crc_plle_aux1; /* _PLLE_AUX1_0, 0x524 */ + uint crc_pllp_reshift; /* _PLLP_RESHIFT_0, 0x528 */ + uint crc_utmipll_hw_pwrdn_cfg0; /* _UTMIPLL_HW_PWRDN_CFG0_0, 0x52C */ + uint crc_pllu_hw_pwrdn_cfg0; /* _PLLU_HW_PWRDN_CFG0_0, 0x530 */ + uint crc_xusb_pll_cfg0; /* _XUSB_PLL_CFG0_0, 0x534 */ + uint crc_reserved51[1]; /* _reserved_51, 0x538 */ + uint crc_clk_cpu_misc; /* _CLK_CPU_MISC_0, 0x53C */ + uint crc_clk_cpug_misc; /* _CLK_CPUG_MISC_0, 0x540 */ + uint crc_clk_cpulp_misc; /* _CLK_CPULP_MISC_0, 0x544 */ + uint crc_pllx_hw_ctrl_cfg; /* _PLLX_HW_CTRL_CFG_0, 0x548 */ + uint crc_pllx_sw_ramp_cfg; /* _PLLX_SW_RAMP_CFG_0, 0x54C */ + uint crc_pllx_hw_ctrl_status; /* _PLLX_HW_CTRL_STATUS_0, 0x550 */ + uint crc_reserved52[1]; /* _reserved_52, 0x554 */ + uint crc_super_gr3d_clk_div; /* _SUPER_GR3D_CLK_DIVIDER_0, 0x558 */ + uint crc_spare_reg0; /* _SPARE_REG0_0, 0x55C */ + + /* Tegra124 - skip to 0x600 here for new CLK_SOURCE_ regs */ + uint crc_reserved60[40]; /* _reserved_60, 0x560 - 0x5FC */ + uint crc_clk_src_x[TEGRA_CLK_SOURCES_X]; /* XUSB, etc, 0x600-0x678 */ }; /* CLK_RST_CONTROLLER_CLK_CPU_CMPLX_0 */ @@ -160,6 +224,9 @@ struct clk_rst_ctlr { #define PLL_BASE_OVRRIDE_MASK (1U << 28) +#define PLL_LOCK_SHIFT 27 +#define PLL_LOCK_MASK (1U << PLL_LOCK_SHIFT) + #define PLL_DIVP_SHIFT 20 #define PLL_DIVP_MASK (7U << PLL_DIVP_SHIFT) @@ -209,6 +276,20 @@ enum { IN_408_OUT_9_6_DIVISOR = 83, }; +#define PLLP_OUT1_RSTN_DIS (1 << 0) +#define PLLP_OUT1_RSTN_EN (0 << 0) +#define PLLP_OUT1_CLKEN (1 << 1) +#define PLLP_OUT2_RSTN_DIS (1 << 16) +#define PLLP_OUT2_RSTN_EN (0 << 16) +#define PLLP_OUT2_CLKEN (1 << 17) + +#define PLLP_OUT3_RSTN_DIS (1 << 0) +#define PLLP_OUT3_RSTN_EN (0 << 0) +#define PLLP_OUT3_CLKEN (1 << 1) +#define PLLP_OUT4_RSTN_DIS (1 << 16) +#define PLLP_OUT4_RSTN_EN (0 << 16) +#define PLLP_OUT4_CLKEN (1 << 17) + /* CLK_RST_CONTROLLER_UTMIP_PLL_CFG1_0 */ #define PLLU_POWERDOWN (1 << 16) #define PLL_ENABLE_POWERDOWN (1 << 14) @@ -219,9 +300,15 @@ enum { #define UTMIP_FORCE_PD_SAMP_B_POWERDOWN (1 << 2) #define UTMIP_FORCE_PD_SAMP_A_POWERDOWN (1 << 0) -/* CLK_RST_CONTROLLER_OSC_CTRL_0 */ -#define OSC_XOBP_SHIFT 1 -#define OSC_XOBP_MASK (1U << OSC_XOBP_SHIFT) +/* CLK_RST_CONTROLLER_OSC_CTRL_0 0x50 */ +#define OSC_XOE_SHIFT 0 +#define OSC_XOE_MASK (1 << OSC_XOE_SHIFT) +#define OSC_XOE_ENABLE (1 << OSC_XOE_SHIFT) +#define OSC_XOBP_SHIFT 1 +#define OSC_XOBP_MASK (1U << OSC_XOBP_SHIFT) +#define OSC_XOFS_SHIFT 4 +#define OSC_XOFS_MASK (0x3F << OSC_XOFS_SHIFT) +#define OSC_DRIVE_STRENGTH 7 /* * CLK_RST_CONTROLLER_CLK_SOURCE_x_OUT_0 - the mask here is normally 8 bits @@ -233,11 +320,15 @@ enum { #define OUT_CLK_DIVISOR_SHIFT 0 #define OUT_CLK_DIVISOR_MASK (0xffff << OUT_CLK_DIVISOR_SHIFT) -#define OUT_CLK_SOURCE_SHIFT 30 -#define OUT_CLK_SOURCE_MASK (3U << OUT_CLK_SOURCE_SHIFT) +#define OUT_CLK_SOURCE_31_30_SHIFT 30 +#define OUT_CLK_SOURCE_31_30_MASK (3U << OUT_CLK_SOURCE_31_30_SHIFT) + +#define OUT_CLK_SOURCE_31_29_SHIFT 29 +#define OUT_CLK_SOURCE_31_29_MASK (7U << OUT_CLK_SOURCE_31_29_SHIFT) -#define OUT_CLK_SOURCE4_SHIFT 28 -#define OUT_CLK_SOURCE4_MASK (15U << OUT_CLK_SOURCE4_SHIFT) +/* Note: See comment for MASK_BITS_31_28 in arch-tegra/clock.h */ +#define OUT_CLK_SOURCE_31_28_SHIFT 28 +#define OUT_CLK_SOURCE_31_28_MASK (15U << OUT_CLK_SOURCE_31_28_SHIFT) /* CLK_RST_CONTROLLER_SCLK_BURST_POLICY */ #define SCLK_SYS_STATE_SHIFT 28U @@ -290,7 +381,7 @@ enum { #define SUPER_SCLK_DIVISOR_SHIFT 0 #define SUPER_SCLK_DIVISOR_MASK (0xff << SUPER_SCLK_DIVISOR_SHIFT) -/* CLK_RST_CONTROLLER_CLK_SYSTEM_RATE */ +/* CLK_RST_CONTROLLER_CLK_SYSTEM_RATE 0x30 */ #define CLK_SYS_RATE_HCLK_DISABLE_SHIFT 7 #define CLK_SYS_RATE_HCLK_DISABLE_MASK (1 << CLK_SYS_RATE_HCLK_DISABLE_SHIFT) #define CLK_SYS_RATE_AHB_RATE_SHIFT 4 @@ -300,23 +391,53 @@ enum { #define CLK_SYS_RATE_APB_RATE_SHIFT 0 #define CLK_SYS_RATE_APB_RATE_MASK (3 << CLK_SYS_RATE_AHB_RATE_SHIFT) -/* CLK_RST_CONTROLLER_RST_CPUxx_CMPLX_CLR */ -#define CLR_CPURESET0 (1 << 0) -#define CLR_CPURESET1 (1 << 1) -#define CLR_CPURESET2 (1 << 2) -#define CLR_CPURESET3 (1 << 3) -#define CLR_DBGRESET0 (1 << 12) -#define CLR_DBGRESET1 (1 << 13) -#define CLR_DBGRESET2 (1 << 14) -#define CLR_DBGRESET3 (1 << 15) -#define CLR_CORERESET0 (1 << 16) -#define CLR_CORERESET1 (1 << 17) -#define CLR_CORERESET2 (1 << 18) -#define CLR_CORERESET3 (1 << 19) -#define CLR_CXRESET0 (1 << 20) -#define CLR_CXRESET1 (1 << 21) -#define CLR_CXRESET2 (1 << 22) -#define CLR_CXRESET3 (1 << 23) -#define CLR_NONCPURESET (1 << 29) +/* CLK_RST_CONTROLLER_RST_CPUxx_CMPLX_CLR 0x344 */ +#define CLR_CPURESET0 (1 << 0) +#define CLR_CPURESET1 (1 << 1) +#define CLR_CPURESET2 (1 << 2) +#define CLR_CPURESET3 (1 << 3) +#define CLR_DBGRESET0 (1 << 12) +#define CLR_DBGRESET1 (1 << 13) +#define CLR_DBGRESET2 (1 << 14) +#define CLR_DBGRESET3 (1 << 15) +#define CLR_CORERESET0 (1 << 16) +#define CLR_CORERESET1 (1 << 17) +#define CLR_CORERESET2 (1 << 18) +#define CLR_CORERESET3 (1 << 19) +#define CLR_CXRESET0 (1 << 20) +#define CLR_CXRESET1 (1 << 21) +#define CLR_CXRESET2 (1 << 22) +#define CLR_CXRESET3 (1 << 23) +#define CLR_L2RESET (1 << 24) +#define CLR_NONCPURESET (1 << 29) +#define CLR_PRESETDBG (1 << 30) + +/* CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR 0x34c */ +#define CLR_CPU0_CLK_STP (1 << 8) +#define CLR_CPU1_CLK_STP (1 << 9) +#define CLR_CPU2_CLK_STP (1 << 10) +#define CLR_CPU3_CLK_STP (1 << 11) + +/* CRC_CLK_SOURCE_MSELECT_0 0x3b4 */ +#define MSELECT_CLK_SRC_PLLP_OUT0 (0 << 29) + +/* CRC_CLK_ENB_V_SET_0 0x440 */ +#define SET_CLK_ENB_CPUG_ENABLE (1 << 0) +#define SET_CLK_ENB_CPULP_ENABLE (1 << 1) +#define SET_CLK_ENB_MSELECT_ENABLE (1 << 3) + +/* CLK_RST_CONTROLLER_UTMIP_PLL_CFG1_0 0x484 */ +#define PLL_ACTIVE_POWERDOWN (1 << 12) +#define PLL_ENABLE_POWERDOWN (1 << 14) +#define PLLU_POWERDOWN (1 << 16) + +/* CLK_RST_CONTROLLER_UTMIP_PLL_CFG2_0 0x488 */ +#define UTMIP_FORCE_PD_SAMP_A_POWERDOWN (1 << 0) +#define UTMIP_FORCE_PD_SAMP_B_POWERDOWN (1 << 2) +#define UTMIP_FORCE_PD_SAMP_C_POWERDOWN (1 << 4) + +/* CLK_RST_CONTROLLER_PLLX_MISC_3 */ +#define PLLX_IDDQ_SHIFT 3 +#define PLLX_IDDQ_MASK (1U << PLLX_IDDQ_SHIFT) #endif /* _TEGRA_CLK_RST_H_ */ diff --git a/arch/arm/include/asm/arch-tegra/clock.h b/arch/arm/include/asm/arch-tegra/clock.h index e7d0fd4..9d8114c 100644 --- a/arch/arm/include/asm/arch-tegra/clock.h +++ b/arch/arm/include/asm/arch-tegra/clock.h @@ -20,6 +20,21 @@ enum clock_osc_freq { CLOCK_OSC_FREQ_COUNT, }; +/* + * Note that no Tegra clock register actually uses all of bits 31:28 as + * the mux field. Rather, bits 30:28, 29:28, or 28 are used. However, in + * those cases, nothing is stored in the bits about the mux field, so it's + * safe to pretend that the mux field extends all the way to the end of the + * register. As such, the U-Boot clock driver is currently a bit lazy, and + * doesn't distinguish between 31:28, 30:28, 29:28 and 28; it just lumps + * them all together and pretends they're all 31:28. + */ +enum { + MASK_BITS_31_30, + MASK_BITS_31_29, + MASK_BITS_31_28, +}; + #include <asm/arch/clock-tables.h> /* PLL stabilization delay in usec */ #define CLOCK_PLL_STABLE_DELAY_US 300 @@ -305,4 +320,6 @@ int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon); /* SoC-specific TSC init */ void arch_timer_init(void); +void tegra30_set_up_pllp(void); + #endif /* _TEGRA_CLOCK_H_ */ diff --git a/arch/arm/include/asm/arch-tegra/gp_padctrl.h b/arch/arm/include/asm/arch-tegra/gp_padctrl.h index c840c08..7a86acb 100644 --- a/arch/arm/include/asm/arch-tegra/gp_padctrl.h +++ b/arch/arm/include/asm/arch-tegra/gp_padctrl.h @@ -20,5 +20,6 @@ #define CHIPID_TEGRA20 0x20 #define CHIPID_TEGRA30 0x30 #define CHIPID_TEGRA114 0x35 +#define CHIPID_TEGRA124 0x40 #endif /* _TEGRA_GP_PADCTRL_H_ */ diff --git a/arch/arm/include/asm/arch-tegra/pmc.h b/arch/arm/include/asm/arch-tegra/pmc.h index ba22236..4c3264b 100644 --- a/arch/arm/include/asm/arch-tegra/pmc.h +++ b/arch/arm/include/asm/arch-tegra/pmc.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2010,2011 + * (C) Copyright 2010,2011,2014 * NVIDIA Corporation <www.nvidia.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -21,7 +21,11 @@ struct pmc_ctlr { uint pmc_dpd_sample; /* _DPD_PADS_SAMPLE_0, offset 20 */ uint pmc_dpd_enable; /* _DPD_PADS_ENABLE_0, offset 24 */ uint pmc_pwrgate_timer_off; /* _PWRGATE_TIMER_OFF_0, offset 28 */ +#if defined(CONFIG_TEGRA20) || defined(CONFIG_TEGRA30) uint pmc_pwrgate_timer_on; /* _PWRGATE_TIMER_ON_0, offset 2C */ +#else + uint pmc_clamp_status; /* _CLAMP_STATUS_0, offset 2C */ +#endif uint pmc_pwrgate_toggle; /* _PWRGATE_TOGGLE_0, offset 30 */ uint pmc_remove_clamping; /* _REMOVE_CLAMPING_CMD_0, offset 34 */ uint pmc_pwrgate_status; /* _PWRGATE_STATUS_0, offset 38 */ @@ -103,6 +107,179 @@ struct pmc_ctlr { uint pmc_sys_33v_en; /* _SYS_33V_EN_0, offset 154 */ uint pmc_bo_mirror_access; /* _BOUNDOUT_MIRROR_ACCESS_0, off158 */ uint pmc_gate; /* _GATE_0, offset 15C */ + /* The following fields are in Tegra124 and later only */ + uint pmc_wake2_mask; /* _WAKE2_MASK_0, offset 160 */ + uint pmc_wake2_lvl; /* _WAKE2_LVL_0, offset 164 */ + uint pmc_wake2_stat; /* _WAKE2_STATUS_0, offset 168 */ + uint pmc_sw_wake2_stat; /* _SW_WAKE2_STATUS_0, offset 16C */ + uint pmc_auto_wake2_lvl_mask; /* _AUTO_WAKE2_LVL_MASK_0, offset 170 */ + uint pmc_pg_mask2; /* _PG_MASK_2_0, offset 174 */ + uint pmc_pg_mask_ce1; /* _PG_MASK_CE1_0, offset 178 */ + uint pmc_pg_mask_ce2; /* _PG_MASK_CE2_0, offset 17C */ + uint pmc_pg_mask_ce3; /* _PG_MASK_CE3_0, offset 180 */ + uint pmc_pwrgate_timer_ce0; /* _PWRGATE_TIMER_CE_0_0, offset 184 */ + uint pmc_pwrgate_timer_ce1; /* _PWRGATE_TIMER_CE_1_0, offset 188 */ + uint pmc_pwrgate_timer_ce2; /* _PWRGATE_TIMER_CE_2_0, offset 18C */ + uint pmc_pwrgate_timer_ce3; /* _PWRGATE_TIMER_CE_3_0, offset 190 */ + uint pmc_pwrgate_timer_ce4; /* _PWRGATE_TIMER_CE_4_0, offset 194 */ + uint pmc_pwrgate_timer_ce5; /* _PWRGATE_TIMER_CE_5_0, offset 198 */ + uint pmc_pwrgate_timer_ce6; /* _PWRGATE_TIMER_CE_6_0, offset 19C */ + uint pmc_pcx_edpd_cntrl; /* _PCX_EDPD_CNTRL_0, offset 1A0 */ + uint pmc_osc_edpd_over; /* _OSC_EDPD_OVER_0, offset 1A4 */ + uint pmc_clk_out_cntrl; /* _CLK_OUT_CNTRL_0, offset 1A8 */ + uint pmc_sata_pwrgate; /* _SATA_PWRGT_0, offset 1AC */ + uint pmc_sensor_ctrl; /* _SENSOR_CTRL_0, offset 1B0 */ + uint pmc_reset_status; /* _RTS_STATUS_0, offset 1B4 */ + uint pmc_io_dpd_req; /* _IO_DPD_REQ_0, offset 1B8 */ + uint pmc_io_dpd_stat; /* _IO_DPD_STATUS_0, offset 1BC */ + uint pmc_io_dpd2_req; /* _IO_DPD2_REQ_0, offset 1C0 */ + uint pmc_io_dpd2_stat; /* _IO_DPD2_STATUS_0, offset 1C4 */ + uint pmc_sel_dpd_tim; /* _SEL_DPD_TIM_0, offset 1C8 */ + uint pmc_vddp_sel; /* _VDDP_SEL_0, offset 1CC */ + + uint pmc_ddr_cfg; /* _DDR_CFG_0, offset 1D0 */ + uint pmc_e_no_vttgen; /* _E_NO_VTTGEN_0, offset 1D4 */ + uint pmc_reserved0; /* _RESERVED, offset 1D8 */ + uint pmc_pllm_wb0_ovrride_frq; /* _PLLM_WB0_OVERRIDE_FREQ_0, off 1DC */ + uint pmc_test_pwrgate; /* _TEST_PWRGATE_0, offset 1E0 */ + uint pmc_pwrgate_timer_mult; /* _PWRGATE_TIMER_MULT_0, offset 1E4 */ + uint pmc_dsi_sel_dpd; /* _DSI_SEL_DPD_0, offset 1E8 */ + uint pmc_utmip_uhsic_triggers; /* _UTMIP_UHSIC_TRIGGERS_0, off 1EC */ + uint pmc_utmip_uhsic_saved_st; /* _UTMIP_UHSIC_SAVED_STATE_0, off1F0 */ + uint pmc_utmip_pad_cfg; /* _UTMIP_PAD_CFG_0, offset 1F4 */ + uint pmc_utmip_term_pad_cfg; /* _UTMIP_TERM_PAD_CFG_0, offset 1F8 */ + uint pmc_utmip_uhsic_sleep_cfg; /* _UTMIP_UHSIC_SLEEP_CFG_0, off 1FC */ + + uint pmc_todo_0[9]; /* offset 200-220 */ + uint pmc_secure_scratch6; /* _SECURE_SCRATCH6_0, offset 224 */ + uint pmc_secure_scratch7; /* _SECURE_SCRATCH7_0, offset 228 */ + uint pmc_scratch43; /* _SCRATCH43_0, offset 22C */ + uint pmc_scratch44; /* _SCRATCH44_0, offset 230 */ + uint pmc_scratch45; + uint pmc_scratch46; + uint pmc_scratch47; + uint pmc_scratch48; + uint pmc_scratch49; + uint pmc_scratch50; + uint pmc_scratch51; + uint pmc_scratch52; + uint pmc_scratch53; + uint pmc_scratch54; + uint pmc_scratch55; /* _SCRATCH55_0, offset 25C */ + uint pmc_scratch0_eco; /* _SCRATCH0_ECO_0, offset 260 */ + uint pmc_por_dpd_ctrl; /* _POR_DPD_CTRL_0, offset 264 */ + uint pmc_scratch2_eco; /* _SCRATCH2_ECO_0, offset 268 */ + uint pmc_todo_1[17]; /* TODO: 26C ~ 2AC */ + uint pmc_pllm_wb0_override2; /* _PLLM_WB0_OVERRIDE2, offset 2B0 */ + uint pmc_tsc_mult; /* _TSC_MULT_0, offset 2B4 */ + uint pmc_cpu_vsense_override; /* _CPU_VSENSE_OVERRIDE_0, offset 2B8 */ + uint pmc_glb_amap_cfg; /* _GLB_AMAP_CFG_0, offset 2BC */ + uint pmc_sticky_bits; /* _STICKY_BITS_0, offset 2C0 */ + uint pmc_sec_disable2; /* _SEC_DISALBE2, offset 2C4 */ + uint pmc_weak_bias; /* _WEAK_BIAS_0, offset 2C8 */ + uint pmc_todo_3[13]; /* TODO: 2CC ~ 2FC */ + uint pmc_secure_scratch8; /* _SECURE_SCRATCH8_0, offset 300 */ + uint pmc_secure_scratch9; + uint pmc_secure_scratch10; + uint pmc_secure_scratch11; + uint pmc_secure_scratch12; + uint pmc_secure_scratch13; + uint pmc_secure_scratch14; + uint pmc_secure_scratch15; + uint pmc_secure_scratch16; + uint pmc_secure_scratch17; + uint pmc_secure_scratch18; + uint pmc_secure_scratch19; + uint pmc_secure_scratch20; + uint pmc_secure_scratch21; + uint pmc_secure_scratch22; + uint pmc_secure_scratch23; + uint pmc_secure_scratch24; /* _SECURE_SCRATCH24_0, offset 340 */ + uint pmc_secure_scratch25; + uint pmc_secure_scratch26; + uint pmc_secure_scratch27; + uint pmc_secure_scratch28; + uint pmc_secure_scratch29; + uint pmc_secure_scratch30; + uint pmc_secure_scratch31; + uint pmc_secure_scratch32; + uint pmc_secure_scratch33; + uint pmc_secure_scratch34; + uint pmc_secure_scratch35; /* _SECURE_SCRATCH35_0, offset 36C */ + + uint pmc_reserved1[52]; /* RESERVED: 370 ~ 43C */ + uint pmc_cntrl2; /* _CNTRL2_0, offset 440 */ + uint pmc_reserved2[6]; /* RESERVED: 444 ~ 458 */ + uint pmc_io_dpd3_req; /* _IO_DPD3_REQ_0, offset 45c */ + uint pmc_io_dpd3_stat; /* _IO_DPD3_STATUS_0, offset 460 */ + uint pmc_strap_opt_a; /* _STRAPPING_OPT_A_0, offset 464 */ + uint pmc_reserved3[102]; /* RESERVED: 468 ~ 5FC */ + + uint pmc_scratch56; /* _SCRATCH56_0, offset 600 */ + uint pmc_scratch57; + uint pmc_scratch58; + uint pmc_scratch59; + uint pmc_scratch60; + uint pmc_scratch61; + uint pmc_scratch62; + uint pmc_scratch63; + uint pmc_scratch64; + uint pmc_scratch65; + uint pmc_scratch66; + uint pmc_scratch67; + uint pmc_scratch68; + uint pmc_scratch69; + uint pmc_scratch70; + uint pmc_scratch71; + uint pmc_scratch72; + uint pmc_scratch73; + uint pmc_scratch74; + uint pmc_scratch75; + uint pmc_scratch76; + uint pmc_scratch77; + uint pmc_scratch78; + uint pmc_scratch79; + uint pmc_scratch80; + uint pmc_scratch81; + uint pmc_scratch82; + uint pmc_scratch83; + uint pmc_scratch84; + uint pmc_scratch85; + uint pmc_scratch86; + uint pmc_scratch87; + uint pmc_scratch88; + uint pmc_scratch89; + uint pmc_scratch90; + uint pmc_scratch91; + uint pmc_scratch92; + uint pmc_scratch93; + uint pmc_scratch94; + uint pmc_scratch95; + uint pmc_scratch96; + uint pmc_scratch97; + uint pmc_scratch98; + uint pmc_scratch99; + uint pmc_scratch100; + uint pmc_scratch101; + uint pmc_scratch102; + uint pmc_scratch103; + uint pmc_scratch104; + uint pmc_scratch105; + uint pmc_scratch106; + uint pmc_scratch107; + uint pmc_scratch108; + uint pmc_scratch109; + uint pmc_scratch110; + uint pmc_scratch111; + uint pmc_scratch112; + uint pmc_scratch113; + uint pmc_scratch114; + uint pmc_scratch115; + uint pmc_scratch116; + uint pmc_scratch117; + uint pmc_scratch118; + uint pmc_scratch119; + uint pmc_scratch1_eco; /* offset 700 */ }; #define CPU_PWRED 1 @@ -114,11 +291,90 @@ struct pmc_ctlr { #define CPUPWRREQ_OE (1 << 16) #define CPUPWRREQ_POL (1 << 15) -#define CRAILID (0) -#define CE0ID (14) -#define C0NCID (15) -#define CRAIL (1 << CRAILID) -#define CE0 (1 << CE0ID) -#define C0NC (1 << C0NCID) +#define CRAIL 0 +#define CE0 14 +#define C0NC 15 + +#define PMC_XOFS_SHIFT 1 +#define PMC_XOFS_MASK (0x3F << PMC_XOFS_SHIFT) + +#define TIMER_MULT_SHIFT 0 +#define TIMER_MULT_MASK (3 << TIMER_MULT_SHIFT) +#define TIMER_MULT_CPU_SHIFT 2 +#define TIMER_MULT_CPU_MASK (3 << TIMER_MULT_CPU_SHIFT) +#define MULT_1 0 +#define MULT_2 1 +#define MULT_4 2 +#define MULT_8 3 + +#define AMAP_WRITE_SHIFT 20 +#define AMAP_WRITE_ON (1 << AMAP_WRITE_SHIFT) + +/* SEC_DISABLE_0, 0x04 */ +#define SEC_DISABLE_WRITE0_ON (1 << 4) +#define SEC_DISABLE_READ0_ON (1 << 5) +#define SEC_DISABLE_WRITE1_ON (1 << 6) +#define SEC_DISABLE_READ1_ON (1 << 7) +#define SEC_DISABLE_WRITE2_ON (1 << 8) +#define SEC_DISABLE_READ2_ON (1 << 9) +#define SEC_DISABLE_WRITE3_ON (1 << 10) +#define SEC_DISABLE_READ3_ON (1 << 11) +#define SEC_DISABLE_AMAP_WRITE_ON (1 << 20) + +/* APBDEV_PMC_PWRGATE_TOGGLE_0 0x30 */ +#define PWRGATE_TOGGLE_PARTID_CRAIL 0 +#define PWRGATE_TOGGLE_PARTID_TD 1 +#define PWRGATE_TOGGLE_PARTID_VE 2 +#define PWRGATE_TOGGLE_PARTID_PCX 3 +#define PWRGATE_TOGGLE_PARTID_VDE 4 +#define PWRGATE_TOGGLE_PARTID_L2C 5 +#define PWRGATE_TOGGLE_PARTID_MPE 6 +#define PWRGATE_TOGGLE_PARTID_HEG 7 +#define PWRGATE_TOGGLE_PARTID_SAX 8 +#define PWRGATE_TOGGLE_PARTID_CE1 9 +#define PWRGATE_TOGGLE_PARTID_CE2 10 +#define PWRGATE_TOGGLE_PARTID_CE3 11 +#define PWRGATE_TOGGLE_PARTID_CELP 12 +#define PWRGATE_TOGGLE_PARTID_CE0 14 +#define PWRGATE_TOGGLE_PARTID_C0NC 15 +#define PWRGATE_TOGGLE_PARTID_C1NC 16 +#define PWRGATE_TOGGLE_PARTID_SOR 17 +#define PWRGATE_TOGGLE_PARTID_DIS 18 +#define PWRGATE_TOGGLE_PARTID_DISB 19 +#define PWRGATE_TOGGLE_PARTID_XUSBA 20 +#define PWRGATE_TOGGLE_PARTID_XUSBB 21 +#define PWRGATE_TOGGLE_PARTID_XUSBC 22 +#define PWRGATE_TOGGLE_PARTID_VIC 23 +#define PWRGATE_TOGGLE_PARTID_IRAM 24 +#define PWRGATE_TOGGLE_START (1 << 8) + +/* APBDEV_PMC_PWRGATE_STATUS_0 0x38 */ +#define PWRGATE_STATUS_CRAIL_ENABLE (1 << 0) +#define PWRGATE_STATUS_TD_ENABLE (1 << 1) +#define PWRGATE_STATUS_VE_ENABLE (1 << 2) +#define PWRGATE_STATUS_PCX_ENABLE (1 << 3) +#define PWRGATE_STATUS_VDE_ENABLE (1 << 4) +#define PWRGATE_STATUS_L2C_ENABLE (1 << 5) +#define PWRGATE_STATUS_MPE_ENABLE (1 << 6) +#define PWRGATE_STATUS_HEG_ENABLE (1 << 7) +#define PWRGATE_STATUS_SAX_ENABLE (1 << 8) +#define PWRGATE_STATUS_CE1_ENABLE (1 << 9) +#define PWRGATE_STATUS_CE2_ENABLE (1 << 10) +#define PWRGATE_STATUS_CE3_ENABLE (1 << 11) +#define PWRGATE_STATUS_CELP_ENABLE (1 << 12) +#define PWRGATE_STATUS_CE0_ENABLE (1 << 14) +#define PWRGATE_STATUS_C0NC_ENABLE (1 << 15) +#define PWRGATE_STATUS_C1NC_ENABLE (1 << 16) +#define PWRGATE_STATUS_SOR_ENABLE (1 << 17) +#define PWRGATE_STATUS_DIS_ENABLE (1 << 18) +#define PWRGATE_STATUS_DISB_ENABLE (1 << 19) +#define PWRGATE_STATUS_XUSBA_ENABLE (1 << 20) +#define PWRGATE_STATUS_XUSBB_ENABLE (1 << 21) +#define PWRGATE_STATUS_XUSBC_ENABLE (1 << 22) +#define PWRGATE_STATUS_VIC_ENABLE (1 << 23) +#define PWRGATE_STATUS_IRAM_ENABLE (1 << 24) + +/* APBDEV_PMC_CNTRL2_0 0x440 */ +#define HOLD_CKE_LOW_EN (1 << 12) #endif /* PMC_H */ diff --git a/arch/arm/include/asm/arch-tegra/tegra.h b/arch/arm/include/asm/arch-tegra/tegra.h index e99f681..5fe19ae 100644 --- a/arch/arm/include/asm/arch-tegra/tegra.h +++ b/arch/arm/include/asm/arch-tegra/tegra.h @@ -68,6 +68,7 @@ enum { SKU_ID_TM30MQS_P_A3 = 0xb1, SKU_ID_T114_ENG = 0x00, /* Dalmore value, unfused */ SKU_ID_T114_1 = 0x01, + SKU_ID_T124_ENG = 0x00, /* Venice2 value, unfused */ }; /* @@ -81,6 +82,7 @@ enum { TEGRA_SOC_T25, TEGRA_SOC_T30, TEGRA_SOC_T114, + TEGRA_SOC_T124, TEGRA_SOC_CNT, TEGRA_SOC_UNKNOWN = -1, diff --git a/arch/arm/include/asm/arch-tegra124/ahb.h b/arch/arm/include/asm/arch-tegra124/ahb.h new file mode 100644 index 0000000..4e48c43 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra124/ahb.h @@ -0,0 +1,91 @@ +/* + * (C) Copyright 2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA124_AHB_H_ +#define _TEGRA124_AHB_H_ + +struct ahb_ctlr { + u32 reserved0; /* 00h */ + u32 arbitration_disable; /* _ARBITRATION_DISABLE_0, 04h */ + u32 arbitration_priority_ctrl; /* _ARBITRATION_PRIORITY_CTRL_0,08h */ + u32 arbitration_usr_protect; /* _ARBITRATION_USR_PROTECT_0, 0ch */ + u32 gizmo_ahb_mem; /* _GIZMO_AHB_MEM_0, 10h */ + u32 gizmo_apb_dma; /* _GIZMO_APB_DMA_0, 14h */ + u32 reserved6[2]; /* 18h, 1ch */ + u32 gizmo_usb; /* _GIZMO_USB_0, 20h */ + u32 gizmo_ahb_xbar_bridge; /* _GIZMO_AHB_XBAR_BRIDGE_0, 24h */ + u32 gizmo_cpu_ahb_bridge; /* _GIZMO_CPU_AHB_BRIDGE_0, 28h */ + u32 gizmo_cop_ahb_bridge; /* _GIZMO_COP_AHB_BRIDGE_0, 2ch */ + u32 gizmo_xbar_apb_ctlr; /* _GIZMO_XBAR_APB_CTLR_0, 30h */ + u32 gizmo_vcp_ahb_bridge; /* _GIZMO_VCP_AHB_BRIDGE_0, 34h */ + u32 reserved13[2]; /* 38h, 3ch */ + u32 gizmo_nand; /* _GIZMO_NAND_0, 40h */ + u32 reserved15; /* 44h */ + u32 gizmo_sdmmc4; /* _GIZMO_SDMMC4_0, 48h */ + u32 reserved17; /* 4ch */ + u32 gizmo_se; /* _GIZMO_SE_0, 50h */ + u32 gizmo_tzram; /* _GIZMO_TZRAM_0, 54h */ + u32 reserved20[3]; /* 58h, 5ch, 60h */ + u32 gizmo_bsev; /* _GIZMO_BSEV_0, 64h */ + u32 reserved22[3]; /* 68h, 6ch, 70h */ + u32 gizmo_bsea; /* _GIZMO_BSEA_0, 74h */ + u32 gizmo_nor; /* _GIZMO_NOR_0, 78h */ + u32 gizmo_usb2; /* _GIZMO_USB2_0, 7ch */ + u32 gizmo_usb3; /* _GIZMO_USB3_0, 80h */ + u32 gizmo_sdmmc1; /* _GIZMO_SDMMC1_0, 84h */ + u32 gizmo_sdmmc2; /* _GIZMO_SDMMC2_0, 88h */ + u32 gizmo_sdmmc3; /* _GIZMO_SDMMC3_0, 8ch */ + u32 reserved30[13]; /* 90h ~ c0h */ + u32 ahb_wrq_empty; /* _AHB_WRQ_EMPTY_0, c4h */ + u32 reserved32[5]; /* c8h ~ d8h */ + u32 ahb_mem_prefetch_cfg_x; /* _AHB_MEM_PREFETCH_CFG_X_0, dch */ + u32 arbitration_xbar_ctrl; /* _ARBITRATION_XBAR_CTRL_0, e0h */ + u32 ahb_mem_prefetch_cfg3; /* _AHB_MEM_PREFETCH_CFG3_0, e4h */ + u32 ahb_mem_prefetch_cfg4; /* _AHB_MEM_PREFETCH_CFG3_0, e8h */ + u32 avp_ppcs_rd_coh_status; /* _AVP_PPCS_RD_COH_STATUS_0, ech */ + u32 ahb_mem_prefetch_cfg1; /* _AHB_MEM_PREFETCH_CFG1_0, f0h */ + u32 ahb_mem_prefetch_cfg2; /* _AHB_MEM_PREFETCH_CFG2_0, f4h */ + u32 ahbslvmem_status; /* _AHBSLVMEM_STATUS_0, f8h */ + /* _ARBITRATION_AHB_MEM_WRQUE_MST_ID_0, fch */ + u32 arbitration_ahb_mem_wrque_mst_id; + u32 arbitration_cpu_abort_addr; /* _ARBITRATION_CPU_ABORT_ADDR_0,100h */ + u32 arbitration_cpu_abort_info; /* _ARBITRATION_CPU_ABORT_INFO_0,104h */ + u32 arbitration_cop_abort_addr; /* _ARBITRATION_COP_ABORT_ADDR_0,108h */ + u32 arbitration_cop_abort_info; /* _ARBITRATION_COP_ABORT_INFO_0,10ch */ + u32 reserved46[4]; /* 110h ~ 11ch */ + u32 avpc_mccif_fifoctrl; /* _AVPC_MCCIF_FIFOCTRL_0, 120h */ + u32 timeout_wcoal_avpc; /* _TIMEOUT_WCOAL_AVPC_0, 124h */ + u32 mpcorelp_mccif_fifoctrl; /* _MPCORELP_MCCIF_FIFOCTRL_0, 128h */ + u32 mpcore_mccif_fifoctrl; /* _MPCORE_MCCIF_FIFOCTRL_0, 12ch */ + u32 axicif_fastsync_ctrl; /* AXICIF_FASTSYNC_CTRL_0, 130h */ + u32 axicif_fastsync_statistics; /* _AXICIF_FASTSYNC_STATISTICS_0,134h */ + /* _AXICIF_FASTSYNC0_CPUCLK_TO_MCCLK_0, 138h */ + u32 axicif_fastsync0_cpuclk_to_mcclk; + /* _AXICIF_FASTSYNC1_CPUCLK_TO_MCCLK_0, 13ch */ + u32 axicif_fastsync1_cpuclk_to_mcclk; + /* _AXICIF_FASTSYNC2_CPUCLK_TO_MCCLK_0, 140h */ + u32 axicif_fastsync2_cpuclk_to_mcclk; + /* _AXICIF_FASTSYNC0_MCCLK_TO_CPUCLK_0, 144h */ + u32 axicif_fastsync0_mcclk_to_cpuclk; + /* _AXICIF_FASTSYNC1_MCCLK_TO_CPUCLK_0, 148h */ + u32 axicif_fastsync1_mcclk_to_cpuclk; + /* _AXICIF_FASTSYNC2_MCCLK_TO_CPUCLK_0, 14ch */ + u32 axicif_fastsync2_mcclk_to_cpuclk; +}; + +#define PPSB_STOPCLK_ENABLE (1 << 2) + +#define GIZ_ENABLE_SPLIT (1 << 0) +#define GIZ_ENB_FAST_REARB (1 << 2) +#define GIZ_DONT_SPLIT_AHB_WR (1 << 7) + +#define GIZ_USB_IMMEDIATE (1 << 18) + +/* AHB_ARBITRATION_XBAR_CTRL_0 0xe0 */ +#define ARBITRATION_XBAR_CTRL_PPSB_ENABLE (1 << 2) + +#endif /* _TEGRA124_AHB_H_ */ diff --git a/arch/arm/include/asm/arch-tegra124/clock-tables.h b/arch/arm/include/asm/arch-tegra124/clock-tables.h new file mode 100644 index 0000000..daf9a2b --- /dev/null +++ b/arch/arm/include/asm/arch-tegra124/clock-tables.h @@ -0,0 +1,496 @@ +/* + * (C) Copyright 2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* Tegra124 clock PLL tables */ + +#ifndef _TEGRA124_CLOCK_TABLES_H_ +#define _TEGRA124_CLOCK_TABLES_H_ + +/* The PLLs supported by the hardware */ +enum clock_id { + CLOCK_ID_FIRST, + CLOCK_ID_CGENERAL = CLOCK_ID_FIRST, + CLOCK_ID_MEMORY, + CLOCK_ID_PERIPH, + CLOCK_ID_AUDIO, + CLOCK_ID_USB, + CLOCK_ID_DISPLAY, + + /* now the simple ones */ + CLOCK_ID_FIRST_SIMPLE, + CLOCK_ID_XCPU = CLOCK_ID_FIRST_SIMPLE, + CLOCK_ID_EPCI, + CLOCK_ID_SFROM32KHZ, + + /* These are the base clocks (inputs to the Tegra SoC) */ + CLOCK_ID_32KHZ, + CLOCK_ID_OSC, + + CLOCK_ID_COUNT, /* number of PLLs */ + + /* + * These are clock IDs that are used in table clock_source[][] + * but will not be assigned as a clock source for any peripheral. + */ + CLOCK_ID_DISPLAY2, + CLOCK_ID_CGENERAL2, + CLOCK_ID_CGENERAL3, + CLOCK_ID_MEMORY2, + CLOCK_ID_SRC2, + + CLOCK_ID_NONE = -1, +}; + +/* The clocks supported by the hardware */ +enum periph_id { + PERIPH_ID_FIRST, + + /* Low word: 31:0 (DEVICES_L) */ + PERIPH_ID_CPU = PERIPH_ID_FIRST, + PERIPH_ID_COP, + PERIPH_ID_TRIGSYS, + PERIPH_ID_ISPB, + PERIPH_ID_RESERVED4, + PERIPH_ID_TMR, + PERIPH_ID_UART1, + PERIPH_ID_UART2, + + /* 8 */ + PERIPH_ID_GPIO, + PERIPH_ID_SDMMC2, + PERIPH_ID_SPDIF, + PERIPH_ID_I2S1, + PERIPH_ID_I2C1, + PERIPH_ID_RESERVED13, + PERIPH_ID_SDMMC1, + PERIPH_ID_SDMMC4, + + /* 16 */ + PERIPH_ID_TCW, + PERIPH_ID_PWM, + PERIPH_ID_I2S2, + PERIPH_ID_RESERVED19, + PERIPH_ID_VI, + PERIPH_ID_RESERVED21, + PERIPH_ID_USBD, + PERIPH_ID_ISP, + + /* 24 */ + PERIPH_ID_RESERVED24, + PERIPH_ID_RESERVED25, + PERIPH_ID_DISP2, + PERIPH_ID_DISP1, + PERIPH_ID_HOST1X, + PERIPH_ID_VCP, + PERIPH_ID_I2S0, + PERIPH_ID_CACHE2, + + /* Middle word: 63:32 (DEVICES_H) */ + PERIPH_ID_MEM, + PERIPH_ID_AHBDMA, + PERIPH_ID_APBDMA, + PERIPH_ID_RESERVED35, + PERIPH_ID_RESERVED36, + PERIPH_ID_STAT_MON, + PERIPH_ID_RESERVED38, + PERIPH_ID_FUSE, + + /* 40 */ + PERIPH_ID_KFUSE, + PERIPH_ID_SBC1, + PERIPH_ID_SNOR, + PERIPH_ID_RESERVED43, + PERIPH_ID_SBC2, + PERIPH_ID_XIO, + PERIPH_ID_SBC3, + PERIPH_ID_I2C5, + + /* 48 */ + PERIPH_ID_DSI, + PERIPH_ID_RESERVED49, + PERIPH_ID_HSI, + PERIPH_ID_HDMI, + PERIPH_ID_CSI, + PERIPH_ID_RESERVED53, + PERIPH_ID_I2C2, + PERIPH_ID_UART3, + + /* 56 */ + PERIPH_ID_MIPI_CAL, + PERIPH_ID_EMC, + PERIPH_ID_USB2, + PERIPH_ID_USB3, + PERIPH_ID_RESERVED60, + PERIPH_ID_VDE, + PERIPH_ID_BSEA, + PERIPH_ID_BSEV, + + /* Upper word 95:64 (DEVICES_U) */ + PERIPH_ID_RESERVED64, + PERIPH_ID_UART4, + PERIPH_ID_UART5, + PERIPH_ID_I2C3, + PERIPH_ID_SBC4, + PERIPH_ID_SDMMC3, + PERIPH_ID_PCIE, + PERIPH_ID_OWR, + + /* 72 */ + PERIPH_ID_AFI, + PERIPH_ID_CORESIGHT, + PERIPH_ID_PCIEXCLK, + PERIPH_ID_AVPUCQ, + PERIPH_ID_LA, + PERIPH_ID_TRACECLKIN, + PERIPH_ID_SOC_THERM, + PERIPH_ID_DTV, + + /* 80 */ + PERIPH_ID_RESERVED80, + PERIPH_ID_I2CSLOW, + PERIPH_ID_DSIB, + PERIPH_ID_TSEC, + PERIPH_ID_RESERVED84, + PERIPH_ID_RESERVED85, + PERIPH_ID_RESERVED86, + PERIPH_ID_EMUCIF, + + /* 88 */ + PERIPH_ID_RESERVED88, + PERIPH_ID_XUSB_HOST, + PERIPH_ID_RESERVED90, + PERIPH_ID_MSENC, + PERIPH_ID_RESERVED92, + PERIPH_ID_RESERVED93, + PERIPH_ID_RESERVED94, + PERIPH_ID_XUSB_DEV, + + PERIPH_ID_VW_FIRST, + /* V word: 31:0 */ + PERIPH_ID_CPUG = PERIPH_ID_VW_FIRST, + PERIPH_ID_CPULP, + PERIPH_ID_V_RESERVED2, + PERIPH_ID_MSELECT, + PERIPH_ID_V_RESERVED4, + PERIPH_ID_I2S3, + PERIPH_ID_I2S4, + PERIPH_ID_I2C4, + + /* 104 */ + PERIPH_ID_SBC5, + PERIPH_ID_SBC6, + PERIPH_ID_AUDIO, + PERIPH_ID_APBIF, + PERIPH_ID_DAM0, + PERIPH_ID_DAM1, + PERIPH_ID_DAM2, + PERIPH_ID_HDA2CODEC2X, + + /* 112 */ + PERIPH_ID_ATOMICS, + PERIPH_ID_V_RESERVED17, + PERIPH_ID_V_RESERVED18, + PERIPH_ID_V_RESERVED19, + PERIPH_ID_V_RESERVED20, + PERIPH_ID_V_RESERVED21, + PERIPH_ID_V_RESERVED22, + PERIPH_ID_ACTMON, + + /* 120 */ + PERIPH_ID_EXTPERIPH1, + PERIPH_ID_EXTPERIPH2, + PERIPH_ID_EXTPERIPH3, + PERIPH_ID_OOB, + PERIPH_ID_SATA, + PERIPH_ID_HDA, + PERIPH_ID_V_RESERVED30, + PERIPH_ID_V_RESERVED31, + + /* W word: 31:0 */ + PERIPH_ID_HDA2HDMICODEC, + PERIPH_ID_SATACOLD, + PERIPH_ID_W_RESERVED2, + PERIPH_ID_W_RESERVED3, + PERIPH_ID_W_RESERVED4, + PERIPH_ID_W_RESERVED5, + PERIPH_ID_W_RESERVED6, + PERIPH_ID_W_RESERVED7, + + /* 136 */ + PERIPH_ID_CEC, + PERIPH_ID_W_RESERVED9, + PERIPH_ID_W_RESERVED10, + PERIPH_ID_W_RESERVED11, + PERIPH_ID_W_RESERVED12, + PERIPH_ID_W_RESERVED13, + PERIPH_ID_XUSB_PADCTL, + PERIPH_ID_W_RESERVED15, + + /* 144 */ + PERIPH_ID_W_RESERVED16, + PERIPH_ID_W_RESERVED17, + PERIPH_ID_W_RESERVED18, + PERIPH_ID_W_RESERVED19, + PERIPH_ID_W_RESERVED20, + PERIPH_ID_ENTROPY, + PERIPH_ID_DDS, + PERIPH_ID_W_RESERVED23, + + /* 152 */ + PERIPH_ID_DP2, + PERIPH_ID_AMX0, + PERIPH_ID_ADX0, + PERIPH_ID_DVFS, + PERIPH_ID_XUSB_SS, + PERIPH_ID_W_RESERVED29, + PERIPH_ID_W_RESERVED30, + PERIPH_ID_W_RESERVED31, + + PERIPH_ID_X_FIRST, + /* X word: 31:0 */ + PERIPH_ID_SPARE = PERIPH_ID_X_FIRST, + PERIPH_ID_X_RESERVED1, + PERIPH_ID_X_RESERVED2, + PERIPH_ID_X_RESERVED3, + PERIPH_ID_CAM_MCLK, + PERIPH_ID_CAM_MCLK2, + PERIPH_ID_I2C6, + PERIPH_ID_X_RESERVED7, + + /* 168 */ + PERIPH_ID_X_RESERVED8, + PERIPH_ID_X_RESERVED9, + PERIPH_ID_X_RESERVED10, + PERIPH_ID_VIM2_CLK, + PERIPH_ID_X_RESERVED12, + PERIPH_ID_X_RESERVED13, + PERIPH_ID_EMC_DLL, + PERIPH_ID_X_RESERVED15, + + /* 176 */ + PERIPH_ID_HDMI_AUDIO, + PERIPH_ID_CLK72MHZ, + PERIPH_ID_VIC, + PERIPH_ID_X_RESERVED19, + PERIPH_ID_ADX1, + PERIPH_ID_DPAUX, + PERIPH_ID_SOR0, + PERIPH_ID_X_RESERVED23, + + /* 184 */ + PERIPH_ID_GPU, + PERIPH_ID_AMX1, + PERIPH_ID_X_RESERVED26, + PERIPH_ID_X_RESERVED27, + PERIPH_ID_X_RESERVED28, + PERIPH_ID_X_RESERVED29, + PERIPH_ID_X_RESERVED30, + PERIPH_ID_X_RESERVED31, + + PERIPH_ID_COUNT, + PERIPH_ID_NONE = -1, +}; + +enum pll_out_id { + PLL_OUT1, + PLL_OUT2, + PLL_OUT3, + PLL_OUT4 +}; + +/* + * Clock peripheral IDs which sadly don't match up with PERIPH_ID. we want + * callers to use the PERIPH_ID for all access to peripheral clocks to avoid + * confusion bewteen PERIPH_ID_... and PERIPHC_... + * + * We don't call this CLOCK_PERIPH_ID or PERIPH_CLOCK_ID as it would just be + * confusing. + */ +enum periphc_internal_id { + /* 0x00 */ + PERIPHC_I2S1, + PERIPHC_I2S2, + PERIPHC_SPDIF_OUT, + PERIPHC_SPDIF_IN, + PERIPHC_PWM, + PERIPHC_05h, + PERIPHC_SBC2, + PERIPHC_SBC3, + + /* 0x08 */ + PERIPHC_08h, + PERIPHC_I2C1, + PERIPHC_I2C5, + PERIPHC_0bh, + PERIPHC_0ch, + PERIPHC_SBC1, + PERIPHC_DISP1, + PERIPHC_DISP2, + + /* 0x10 */ + PERIPHC_10h, + PERIPHC_11h, + PERIPHC_VI, + PERIPHC_13h, + PERIPHC_SDMMC1, + PERIPHC_SDMMC2, + PERIPHC_G3D, + PERIPHC_G2D, + + /* 0x18 */ + PERIPHC_18h, + PERIPHC_SDMMC4, + PERIPHC_VFIR, + PERIPHC_1Bh, + PERIPHC_1Ch, + PERIPHC_HSI, + PERIPHC_UART1, + PERIPHC_UART2, + + /* 0x20 */ + PERIPHC_HOST1X, + PERIPHC_21h, + PERIPHC_22h, + PERIPHC_HDMI, + PERIPHC_24h, + PERIPHC_25h, + PERIPHC_I2C2, + PERIPHC_EMC, + + /* 0x28 */ + PERIPHC_UART3, + PERIPHC_29h, + PERIPHC_VI_SENSOR, + PERIPHC_2bh, + PERIPHC_2ch, + PERIPHC_SBC4, + PERIPHC_I2C3, + PERIPHC_SDMMC3, + + /* 0x30 */ + PERIPHC_UART4, + PERIPHC_UART5, + PERIPHC_VDE, + PERIPHC_OWR, + PERIPHC_NOR, + PERIPHC_CSITE, + PERIPHC_I2S0, + PERIPHC_DTV, + + /* 0x38 */ + PERIPHC_38h, + PERIPHC_39h, + PERIPHC_3ah, + PERIPHC_3bh, + PERIPHC_MSENC, + PERIPHC_TSEC, + PERIPHC_3eh, + PERIPHC_OSC, + + PERIPHC_VW_FIRST, + /* 0x40 */ + PERIPHC_40h = PERIPHC_VW_FIRST, + PERIPHC_MSELECT, + PERIPHC_TSENSOR, + PERIPHC_I2S3, + PERIPHC_I2S4, + PERIPHC_I2C4, + PERIPHC_SBC5, + PERIPHC_SBC6, + + /* 0x48 */ + PERIPHC_AUDIO, + PERIPHC_49h, + PERIPHC_DAM0, + PERIPHC_DAM1, + PERIPHC_DAM2, + PERIPHC_HDA2CODEC2X, + PERIPHC_ACTMON, + PERIPHC_EXTPERIPH1, + + /* 0x50 */ + PERIPHC_EXTPERIPH2, + PERIPHC_EXTPERIPH3, + PERIPHC_52h, + PERIPHC_I2CSLOW, + PERIPHC_SYS, + PERIPHC_55h, + PERIPHC_56h, + PERIPHC_57h, + + /* 0x58 */ + PERIPHC_58h, + PERIPHC_59h, + PERIPHC_5ah, + PERIPHC_5bh, + PERIPHC_SATAOOB, + PERIPHC_SATA, + PERIPHC_HDA, /* 0x428 */ + PERIPHC_5fh, + + PERIPHC_X_FIRST, + /* 0x60 */ + PERIPHC_XUSB_CORE_HOST = PERIPHC_X_FIRST, /* 0x600 */ + PERIPHC_XUSB_FALCON, + PERIPHC_XUSB_FS, + PERIPHC_XUSB_CORE_DEV, + PERIPHC_XUSB_SS, + PERIPHC_CILAB, + PERIPHC_CILCD, + PERIPHC_CILE, + + /* 0x68 */ + PERIPHC_DSIA_LP, + PERIPHC_DSIB_LP, + PERIPHC_ENTROPY, + PERIPHC_DVFS_REF, + PERIPHC_DVFS_SOC, + PERIPHC_TRACECLKIN, + PERIPHC_ADX0, + PERIPHC_AMX0, + + /* 0x70 */ + PERIPHC_EMC_LATENCY, + PERIPHC_SOC_THERM, + PERIPHC_72h, + PERIPHC_73h, + PERIPHC_74h, + PERIPHC_75h, + PERIPHC_VI_SENSOR2, + PERIPHC_I2C6, + + /* 0x78 */ + PERIPHC_78h, + PERIPHC_EMC_DLL, + PERIPHC_HDMI_AUDIO, + PERIPHC_CLK72MHZ, + PERIPHC_ADX1, + PERIPHC_AMX1, + PERIPHC_VIC, + PERIPHC_7fh, + + PERIPHC_COUNT, + + PERIPHC_NONE = -1, +}; + +/* Converts a clock number to a clock register: 0=L, 1=H, 2=U, 0=V, 1=W */ +#define PERIPH_REG(id) \ + (id < PERIPH_ID_VW_FIRST) ? \ + ((id) >> 5) : ((id - PERIPH_ID_VW_FIRST) >> 5) + +/* Mask value for a clock (within PERIPH_REG(id)) */ +#define PERIPH_MASK(id) (1 << ((id) & 0x1f)) + +/* return 1 if a PLL ID is in range */ +#define clock_id_is_pll(id) ((id) >= CLOCK_ID_FIRST && (id) < CLOCK_ID_COUNT) + +/* return 1 if a peripheral ID is in range */ +#define clock_periph_id_isvalid(id) ((id) >= PERIPH_ID_FIRST && \ + (id) < PERIPH_ID_COUNT) + +#endif /* _TEGRA124_CLOCK_TABLES_H_ */ diff --git a/arch/arm/include/asm/arch-tegra124/clock.h b/arch/arm/include/asm/arch-tegra124/clock.h new file mode 100644 index 0000000..8e39d21 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra124/clock.h @@ -0,0 +1,19 @@ +/* + * (C) Copyright 2010-2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* Tegra124 clock control definitions */ + +#ifndef _TEGRA124_CLOCK_H_ +#define _TEGRA124_CLOCK_H_ + +#include <asm/arch-tegra/clock.h> + +/* CLK_RST_CONTROLLER_OSC_CTRL_0 */ +#define OSC_FREQ_SHIFT 28 +#define OSC_FREQ_MASK (0xF << OSC_FREQ_SHIFT) + +#endif /* _TEGRA124_CLOCK_H_ */ diff --git a/arch/arm/include/asm/arch-tegra124/flow.h b/arch/arm/include/asm/arch-tegra124/flow.h new file mode 100644 index 0000000..0db1881 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra124/flow.h @@ -0,0 +1,40 @@ +/* + * (C) Copyright 2010-2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA124_FLOW_H_ +#define _TEGRA124_FLOW_H_ + +struct flow_ctlr { + u32 halt_cpu_events; /* offset 0x00 */ + u32 halt_cop_events; /* offset 0x04 */ + u32 cpu_csr; /* offset 0x08 */ + u32 cop_csr; /* offset 0x0c */ + u32 xrq_events; /* offset 0x10 */ + u32 halt_cpu1_events; /* offset 0x14 */ + u32 cpu1_csr; /* offset 0x18 */ + u32 halt_cpu2_events; /* offset 0x1c */ + u32 cpu2_csr; /* offset 0x20 */ + u32 halt_cpu3_events; /* offset 0x24 */ + u32 cpu3_csr; /* offset 0x28 */ + u32 cluster_control; /* offset 0x2c */ + u32 halt_cop1_events; /* offset 0x30 */ + u32 halt_cop1_csr; /* offset 0x34 */ + u32 cpu_pwr_csr; /* offset 0x38 */ + u32 mpid; /* offset 0x3c */ + u32 ram_repair; /* offset 0x40 */ +}; + +/* HALT_COP_EVENTS_0, 0x04 */ +#define EVENT_MSEC (1 << 24) +#define EVENT_USEC (1 << 25) +#define EVENT_JTAG (1 << 28) +#define EVENT_MODE_STOP (2 << 29) + +/* FLOW_CTLR_CLUSTER_CONTROL_0 0x2c */ +#define ACTIVE_LP (1 << 0) + +#endif /* _TEGRA124_FLOW_H_ */ diff --git a/arch/arm/include/asm/arch-tegra124/funcmux.h b/arch/arm/include/asm/arch-tegra124/funcmux.h new file mode 100644 index 0000000..df94d13 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra124/funcmux.h @@ -0,0 +1,23 @@ +/* + * (C) Copyright 2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* Tegra124 high-level function multiplexing */ + +#ifndef _TEGRA124_FUNCMUX_H_ +#define _TEGRA124_FUNCMUX_H_ + +#include <asm/arch-tegra/funcmux.h> + +/* Configs supported by the func mux */ +enum { + FUNCMUX_DEFAULT = 0, /* default config */ + + /* UART configs */ + FUNCMUX_UART1_KBC = 0, + FUNCMUX_UART4_GPIO = 0, +}; +#endif /* _TEGRA124_FUNCMUX_H_ */ diff --git a/arch/arm/include/asm/arch-tegra124/gp_padctrl.h b/arch/arm/include/asm/arch-tegra124/gp_padctrl.h new file mode 100644 index 0000000..440cbbf --- /dev/null +++ b/arch/arm/include/asm/arch-tegra124/gp_padctrl.h @@ -0,0 +1,74 @@ +/* + * (C) Copyright 2010-2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA124_GP_PADCTRL_H_ +#define _TEGRA124_GP_PADCTRL_H_ + +#include <asm/arch-tegra/gp_padctrl.h> + +/* APB_MISC_GP and padctrl registers */ +struct apb_misc_gp_ctlr { + u32 modereg; /* 0x00: APB_MISC_GP_MODEREG */ + u32 hidrev; /* 0x04: APB_MISC_GP_HIDREV */ + u32 reserved0[22]; /* 0x08 - 0x5C: */ + u32 emu_revid; /* 0x60: APB_MISC_GP_EMU_REVID */ + u32 xactor_scratch; /* 0x64: APB_MISC_GP_XACTOR_SCRATCH */ + u32 aocfg1; /* 0x68: APB_MISC_GP_AOCFG1PADCTRL */ + u32 aocfg2; /* 0x6C: APB_MISC_GP_AOCFG2PADCTRL */ + u32 atcfg1; /* 0x70: APB_MISC_GP_ATCFG1PADCTRL */ + u32 atcfg2; /* 0x74: APB_MISC_GP_ATCFG2PADCTRL */ + u32 atcfg3; /* 0x78: APB_MISC_GP_ATCFG3PADCTRL */ + u32 atcfg4; /* 0x7C: APB_MISC_GP_ATCFG4PADCTRL */ + u32 atcfg5; /* 0x80: APB_MISC_GP_ATCFG5PADCTRL */ + u32 cdev1cfg; /* 0x84: APB_MISC_GP_CDEV1CFGPADCTRL */ + u32 cdev2cfg; /* 0x88: APB_MISC_GP_CDEV2CFGPADCTRL */ + u32 reserved1; /* 0x8C: */ + u32 dap1cfg; /* 0x90: APB_MISC_GP_DAP1CFGPADCTRL */ + u32 dap2cfg; /* 0x94: APB_MISC_GP_DAP2CFGPADCTRL */ + u32 dap3cfg; /* 0x98: APB_MISC_GP_DAP3CFGPADCTRL */ + u32 dap4cfg; /* 0x9C: APB_MISC_GP_DAP4CFGPADCTRL */ + u32 dbgcfg; /* 0xA0: APB_MISC_GP_DBGCFGPADCTRL */ + u32 reserved2[3]; /* 0xA4 - 0xAC: */ + u32 sdio3cfg; /* 0xB0: APB_MISC_GP_SDIO3CFGPADCTRL */ + u32 spicfg; /* 0xB4: APB_MISC_GP_SPICFGPADCTRL */ + u32 uaacfg; /* 0xB8: APB_MISC_GP_UAACFGPADCTRL */ + u32 uabcfg; /* 0xBC: APB_MISC_GP_UABCFGPADCTRL */ + u32 uart2cfg; /* 0xC0: APB_MISC_GP_UART2CFGPADCTRL */ + u32 uart3cfg; /* 0xC4: APB_MISC_GP_UART3CFGPADCTRL */ + u32 reserved3[9]; /* 0xC8-0xE8: */ + u32 sdio1cfg; /* 0xEC: APB_MISC_GP_SDIO1CFGPADCTRL */ + u32 reserved4[3]; /* 0xF0-0xF8: */ + u32 ddccfg; /* 0xFC: APB_MISC_GP_DDCCFGPADCTRL */ + u32 gmacfg; /* 0x100: APB_MISC_GP_GMACFGPADCTRL */ + u32 reserved5[3]; /* 0x104-0x10C: */ + u32 gmecfg; /* 0x110: APB_MISC_GP_GMECFGPADCTRL */ + u32 gmfcfg; /* 0x114: APB_MISC_GP_GMFCFGPADCTRL */ + u32 gmgcfg; /* 0x118: APB_MISC_GP_GMGCFGPADCTRL */ + u32 gmhcfg; /* 0x11C: APB_MISC_GP_GMHCFGPADCTRL */ + u32 owrcfg; /* 0x120: APB_MISC_GP_OWRCFGPADCTRL */ + u32 uadcfg; /* 0x124: APB_MISC_GP_UADCFGPADCTRL */ + u32 reserved6; /* 0x128: */ + u32 dev3cfg; /* 0x12C: APB_MISC_GP_DEV3CFGPADCTRL */ + u32 reserved7[2]; /* 0x130 - 0x134: */ + u32 ceccfg; /* 0x138: APB_MISC_GP_CECCFGPADCTRL */ + u32 reserved8[22]; /* 0x13C - 0x190: */ + u32 atcfg6; /* 0x194: APB_MISC_GP_ATCFG6PADCTRL */ + u32 dap5cfg; /* 0x198: APB_MISC_GP_DAP5CFGPADCTRL */ + u32 vbuscfg; /* 0x19C: APB_MISC_GP_USBVBUSENCFGPADCTRL */ + u32 aocfg3; /* 0x1A0: APB_MISC_GP_AOCFG3PADCTRL */ + u32 hvccfg0; /* 0x1A4: APB_MISC_GP_HVCCFG0PADCTRL */ + u32 sdio4cfg; /* 0x1A8: APB_MISC_GP_SDIO4CFGPADCTRL */ + u32 aocfg0; /* 0x1AC: APB_MISC_GP_AOCFG0PADCTRL */ +}; + +/* SDMMC1/3 settings from section 27.5 of T114 TRM */ +#define SDIOCFG_DRVUP_SLWF 0 +#define SDIOCFG_DRVDN_SLWR 0 +#define SDIOCFG_DRVUP 0x24 +#define SDIOCFG_DRVDN 0x14 + +#endif /* _TEGRA124_GP_PADCTRL_H_ */ diff --git a/arch/arm/include/asm/arch-tegra124/gpio.h b/arch/arm/include/asm/arch-tegra124/gpio.h new file mode 100644 index 0000000..1a6dcb8 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra124/gpio.h @@ -0,0 +1,303 @@ +/* + * (C) Copyright 2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA124_GPIO_H_ +#define _TEGRA124_GPIO_H_ + +/* + * The Tegra124 GPIO controller has 256 GPIOS in 8 banks of 4 ports, + * each with 8 GPIOs. + */ +#define TEGRA_GPIO_PORTS 4 /* number of ports per bank */ +#define TEGRA_GPIO_BANKS 8 /* number of banks */ + +#include <asm/arch-tegra/gpio.h> + +/* GPIO Controller registers for a single bank */ +struct gpio_ctlr_bank { + uint gpio_config[TEGRA_GPIO_PORTS]; + uint gpio_dir_out[TEGRA_GPIO_PORTS]; + uint gpio_out[TEGRA_GPIO_PORTS]; + uint gpio_in[TEGRA_GPIO_PORTS]; + uint gpio_int_status[TEGRA_GPIO_PORTS]; + uint gpio_int_enable[TEGRA_GPIO_PORTS]; + uint gpio_int_level[TEGRA_GPIO_PORTS]; + uint gpio_int_clear[TEGRA_GPIO_PORTS]; + uint gpio_masked_config[TEGRA_GPIO_PORTS]; + uint gpio_masked_dir_out[TEGRA_GPIO_PORTS]; + uint gpio_masked_out[TEGRA_GPIO_PORTS]; + uint gpio_masked_in[TEGRA_GPIO_PORTS]; + uint gpio_masked_int_status[TEGRA_GPIO_PORTS]; + uint gpio_masked_int_enable[TEGRA_GPIO_PORTS]; + uint gpio_masked_int_level[TEGRA_GPIO_PORTS]; + uint gpio_masked_int_clear[TEGRA_GPIO_PORTS]; +}; + +struct gpio_ctlr { + struct gpio_ctlr_bank gpio_bank[TEGRA_GPIO_BANKS]; +}; + +enum gpio_pin { + GPIO_PA0 = 0, /* pin 0 */ + GPIO_PA1, + GPIO_PA2, + GPIO_PA3, + GPIO_PA4, + GPIO_PA5, + GPIO_PA6, + GPIO_PA7, + GPIO_PB0, /* pin 8 */ + GPIO_PB1, + GPIO_PB2, + GPIO_PB3, + GPIO_PB4, + GPIO_PB5, + GPIO_PB6, + GPIO_PB7, + GPIO_PC0, /* pin 16 */ + GPIO_PC1, + GPIO_PC2, + GPIO_PC3, + GPIO_PC4, + GPIO_PC5, + GPIO_PC6, + GPIO_PC7, + GPIO_PD0, /* pin 24 */ + GPIO_PD1, + GPIO_PD2, + GPIO_PD3, + GPIO_PD4, + GPIO_PD5, + GPIO_PD6, + GPIO_PD7, + GPIO_PE0, /* pin 32 */ + GPIO_PE1, + GPIO_PE2, + GPIO_PE3, + GPIO_PE4, + GPIO_PE5, + GPIO_PE6, + GPIO_PE7, + GPIO_PF0, /* pin 40 */ + GPIO_PF1, + GPIO_PF2, + GPIO_PF3, + GPIO_PF4, + GPIO_PF5, + GPIO_PF6, + GPIO_PF7, + GPIO_PG0, /* pin 48 */ + GPIO_PG1, + GPIO_PG2, + GPIO_PG3, + GPIO_PG4, + GPIO_PG5, + GPIO_PG6, + GPIO_PG7, + GPIO_PH0, /* pin 56 */ + GPIO_PH1, + GPIO_PH2, + GPIO_PH3, + GPIO_PH4, + GPIO_PH5, + GPIO_PH6, + GPIO_PH7, + GPIO_PI0, /* pin 64 */ + GPIO_PI1, + GPIO_PI2, + GPIO_PI3, + GPIO_PI4, + GPIO_PI5, + GPIO_PI6, + GPIO_PI7, + GPIO_PJ0, /* pin 72 */ + GPIO_PJ1, + GPIO_PJ2, + GPIO_PJ3, + GPIO_PJ4, + GPIO_PJ5, + GPIO_PJ6, + GPIO_PJ7, + GPIO_PK0, /* pin 80 */ + GPIO_PK1, + GPIO_PK2, + GPIO_PK3, + GPIO_PK4, + GPIO_PK5, + GPIO_PK6, + GPIO_PK7, + GPIO_PL0, /* pin 88 */ + GPIO_PL1, + GPIO_PL2, + GPIO_PL3, + GPIO_PL4, + GPIO_PL5, + GPIO_PL6, + GPIO_PL7, + GPIO_PM0, /* pin 96 */ + GPIO_PM1, + GPIO_PM2, + GPIO_PM3, + GPIO_PM4, + GPIO_PM5, + GPIO_PM6, + GPIO_PM7, + GPIO_PN0, /* pin 104 */ + GPIO_PN1, + GPIO_PN2, + GPIO_PN3, + GPIO_PN4, + GPIO_PN5, + GPIO_PN6, + GPIO_PN7, + GPIO_PO0, /* pin 112 */ + GPIO_PO1, + GPIO_PO2, + GPIO_PO3, + GPIO_PO4, + GPIO_PO5, + GPIO_PO6, + GPIO_PO7, + GPIO_PP0, /* pin 120 */ + GPIO_PP1, + GPIO_PP2, + GPIO_PP3, + GPIO_PP4, + GPIO_PP5, + GPIO_PP6, + GPIO_PP7, + GPIO_PQ0, /* pin 128 */ + GPIO_PQ1, + GPIO_PQ2, + GPIO_PQ3, + GPIO_PQ4, + GPIO_PQ5, + GPIO_PQ6, + GPIO_PQ7, + GPIO_PR0, /* pin 136 */ + GPIO_PR1, + GPIO_PR2, + GPIO_PR3, + GPIO_PR4, + GPIO_PR5, + GPIO_PR6, + GPIO_PR7, + GPIO_PS0, /* pin 144 */ + GPIO_PS1, + GPIO_PS2, + GPIO_PS3, + GPIO_PS4, + GPIO_PS5, + GPIO_PS6, + GPIO_PS7, + GPIO_PT0, /* pin 152 */ + GPIO_PT1, + GPIO_PT2, + GPIO_PT3, + GPIO_PT4, + GPIO_PT5, + GPIO_PT6, + GPIO_PT7, + GPIO_PU0, /* pin 160 */ + GPIO_PU1, + GPIO_PU2, + GPIO_PU3, + GPIO_PU4, + GPIO_PU5, + GPIO_PU6, + GPIO_PU7, + GPIO_PV0, /* pin 168 */ + GPIO_PV1, + GPIO_PV2, + GPIO_PV3, + GPIO_PV4, + GPIO_PV5, + GPIO_PV6, + GPIO_PV7, + GPIO_PW0, /* pin 176 */ + GPIO_PW1, + GPIO_PW2, + GPIO_PW3, + GPIO_PW4, + GPIO_PW5, + GPIO_PW6, + GPIO_PW7, + GPIO_PX0, /* pin 184 */ + GPIO_PX1, + GPIO_PX2, + GPIO_PX3, + GPIO_PX4, + GPIO_PX5, + GPIO_PX6, + GPIO_PX7, + GPIO_PY0, /* pin 192 */ + GPIO_PY1, + GPIO_PY2, + GPIO_PY3, + GPIO_PY4, + GPIO_PY5, + GPIO_PY6, + GPIO_PY7, + GPIO_PZ0, /* pin 200 */ + GPIO_PZ1, + GPIO_PZ2, + GPIO_PZ3, + GPIO_PZ4, + GPIO_PZ5, + GPIO_PZ6, + GPIO_PZ7, + GPIO_PAA0, /* pin 208 */ + GPIO_PAA1, + GPIO_PAA2, + GPIO_PAA3, + GPIO_PAA4, + GPIO_PAA5, + GPIO_PAA6, + GPIO_PAA7, + GPIO_PBB0, /* pin 216 */ + GPIO_PBB1, + GPIO_PBB2, + GPIO_PBB3, + GPIO_PBB4, + GPIO_PBB5, + GPIO_PBB6, + GPIO_PBB7, + GPIO_PCC0, /* pin 224 */ + GPIO_PCC1, + GPIO_PCC2, + GPIO_PCC3, + GPIO_PCC4, + GPIO_PCC5, + GPIO_PCC6, + GPIO_PCC7, + GPIO_PDD0, /* pin 232 */ + GPIO_PDD1, + GPIO_PDD2, + GPIO_PDD3, + GPIO_PDD4, + GPIO_PDD5, + GPIO_PDD6, + GPIO_PDD7, + GPIO_PEE0, /* pin 240 */ + GPIO_PEE1, + GPIO_PEE2, + GPIO_PEE3, + GPIO_PEE4, + GPIO_PEE5, + GPIO_PEE6, + GPIO_PEE7, + GPIO_PFF0, /* pin 248 */ + GPIO_PFF1, + GPIO_PFF2, + GPIO_PFF3, + GPIO_PFF4, + GPIO_PFF5, + GPIO_PFF6, + GPIO_PFF7, /* pin 255 */ +}; + +#endif /* _TEGRA124_GPIO_H_ */ diff --git a/arch/arm/include/asm/arch-tegra124/hardware.h b/arch/arm/include/asm/arch-tegra124/hardware.h new file mode 100644 index 0000000..114fce8 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra124/hardware.h @@ -0,0 +1,16 @@ +/* + * (C) Copyright 2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA124_HARDWARE_H_ +#define _TEGRA124_HARDWARE_H_ + +/* + * Include Tegra-specific hardware definitions + * Nothing needed currently for Tegra124 + */ + +#endif /* _TEGRA124_HARDWARE_H_ */ diff --git a/arch/arm/include/asm/arch-tegra124/pinmux.h b/arch/arm/include/asm/arch-tegra124/pinmux.h new file mode 100644 index 0000000..9662e2b --- /dev/null +++ b/arch/arm/include/asm/arch-tegra124/pinmux.h @@ -0,0 +1,620 @@ +/* + * (C) Copyright 2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA124_PINMUX_H_ +#define _TEGRA124_PINMUX_H_ + +/* + * Pin groups which we adjust. There are three basic attributes of each pin + * group which use this enum: + * + * - function + * - pullup / pulldown + * - tristate or normal + */ +enum pmux_pingrp { + PINGRP_ULPI_DATA0 = 0, /* offset 0x3000 */ + PINGRP_ULPI_DATA1, + PINGRP_ULPI_DATA2, + PINGRP_ULPI_DATA3, + PINGRP_ULPI_DATA4, + PINGRP_ULPI_DATA5, + PINGRP_ULPI_DATA6, + PINGRP_ULPI_DATA7, + PINGRP_ULPI_CLK, + PINGRP_ULPI_DIR, + PINGRP_ULPI_NXT, + PINGRP_ULPI_STP, + PINGRP_DAP3_FS, + PINGRP_DAP3_DIN, + PINGRP_DAP3_DOUT, + PINGRP_DAP3_SCLK, + PINGRP_GPIO_PV0, + PINGRP_GPIO_PV1, + PINGRP_SDMMC1_CLK, + PINGRP_SDMMC1_CMD, + PINGRP_SDMMC1_DAT3, + PINGRP_SDMMC1_DAT2, + PINGRP_SDMMC1_DAT1, + PINGRP_SDMMC1_DAT0, + PINGRP_CLK2_OUT = PINGRP_SDMMC1_DAT0 + 3, + PINGRP_CLK2_REQ, + PINGRP_HDMI_INT = PINGRP_CLK2_REQ + 41, + PINGRP_DDC_SCL, + PINGRP_DDC_SDA, + PINGRP_UART2_RXD = PINGRP_DDC_SDA + 19, + PINGRP_UART2_TXD, + PINGRP_UART2_RTS_N, + PINGRP_UART2_CTS_N, + PINGRP_UART3_TXD, + PINGRP_UART3_RXD, + PINGRP_UART3_CTS_N, + PINGRP_UART3_RTS_N, + PINGRP_GPIO_PU0, + PINGRP_GPIO_PU1, + PINGRP_GPIO_PU2, + PINGRP_GPIO_PU3, + PINGRP_GPIO_PU4, + PINGRP_GPIO_PU5, + PINGRP_GPIO_PU6, + PINGRP_GEN1_I2C_SDA, + PINGRP_GEN1_I2C_SCL, + PINGRP_DAP4_FS, + PINGRP_DAP4_DIN, + PINGRP_DAP4_DOUT, + PINGRP_DAP4_SCLK, + PINGRP_CLK3_OUT, + PINGRP_CLK3_REQ, + /* Renamed on Tegra124, from GMI_xx to GPIO_Pxx */ + PINGRP_GPIO_PC7, /* offset 0x31c0 */ + PINGRP_GPIO_PI5, + PINGRP_GPIO_PI7, + PINGRP_GPIO_PK0, + PINGRP_GPIO_PK1, + PINGRP_GPIO_PJ0, + PINGRP_GPIO_PJ2, + PINGRP_GPIO_PK3, + PINGRP_GPIO_PK4, + PINGRP_GPIO_PK2, + PINGRP_GPIO_PI3, + PINGRP_GPIO_PI6, + PINGRP_GPIO_PG0, + PINGRP_GPIO_PG1, + PINGRP_GPIO_PG2, + PINGRP_GPIO_PG3, + PINGRP_GPIO_PG4, + PINGRP_GPIO_PG5, + PINGRP_GPIO_PG6, + PINGRP_GPIO_PG7, + PINGRP_GPIO_PH0, + PINGRP_GPIO_PH1, + PINGRP_GPIO_PH2, + PINGRP_GPIO_PH3, + PINGRP_GPIO_PH4, + PINGRP_GPIO_PH5, + PINGRP_GPIO_PH6, + PINGRP_GPIO_PH7, + PINGRP_GPIO_PJ7, + PINGRP_GPIO_PB0, + PINGRP_GPIO_PB1, + PINGRP_GPIO_PK7, + PINGRP_GPIO_PI0, + PINGRP_GPIO_PI1, + PINGRP_GPIO_PI2, + PINGRP_GPIO_PI4, /* offset 0x324c */ + PINGRP_GEN2_I2C_SCL, + PINGRP_GEN2_I2C_SDA, + PINGRP_SDMMC4_CLK, + PINGRP_SDMMC4_CMD, + PINGRP_SDMMC4_DAT0, + PINGRP_SDMMC4_DAT1, + PINGRP_SDMMC4_DAT2, + PINGRP_SDMMC4_DAT3, + PINGRP_SDMMC4_DAT4, + PINGRP_SDMMC4_DAT5, + PINGRP_SDMMC4_DAT6, + PINGRP_SDMMC4_DAT7, + PINGRP_CAM_MCLK = PINGRP_SDMMC4_DAT7 + 2, + PINGRP_GPIO_PCC1, + PINGRP_GPIO_PBB0, + PINGRP_CAM_I2C_SCL, + PINGRP_CAM_I2C_SDA, + PINGRP_GPIO_PBB3, + PINGRP_GPIO_PBB4, + PINGRP_GPIO_PBB5, + PINGRP_GPIO_PBB6, + PINGRP_GPIO_PBB7, + PINGRP_GPIO_PCC2, + PINGRP_JTAG_RTCK, + PINGRP_PWR_I2C_SCL, + PINGRP_PWR_I2C_SDA, + PINGRP_KB_ROW0, + PINGRP_KB_ROW1, + PINGRP_KB_ROW2, + PINGRP_KB_ROW3, + PINGRP_KB_ROW4, + PINGRP_KB_ROW5, + PINGRP_KB_ROW6, + PINGRP_KB_ROW7, + PINGRP_KB_ROW8, + PINGRP_KB_ROW9, + PINGRP_KB_ROW10, + PINGRP_KB_ROW11, + PINGRP_KB_ROW12, + PINGRP_KB_ROW13, + PINGRP_KB_ROW14, + PINGRP_KB_ROW15, + PINGRP_KB_COL0, /* offset 0x32fc */ + PINGRP_KB_COL1, + PINGRP_KB_COL2, + PINGRP_KB_COL3, + PINGRP_KB_COL4, + PINGRP_KB_COL5, + PINGRP_KB_COL6, + PINGRP_KB_COL7, + PINGRP_CLK_32K_OUT, + PINGRP_CORE_PWR_REQ = PINGRP_CLK_32K_OUT + 2, /* offset 0x3324 */ + PINGRP_CPU_PWR_REQ, + PINGRP_PWR_INT_N, + PINGRP_CLK_32K_IN, + PINGRP_OWR, + PINGRP_DAP1_FS, + PINGRP_DAP1_DIN, + PINGRP_DAP1_DOUT, + PINGRP_DAP1_SCLK, + PINGRP_CLK1_REQ, + PINGRP_CLK1_OUT, + PINGRP_SPDIF_IN, + PINGRP_SPDIF_OUT, + PINGRP_DAP2_FS, + PINGRP_DAP2_DIN, + PINGRP_DAP2_DOUT, + PINGRP_DAP2_SCLK, + PINGRP_DVFS_PWM, + PINGRP_GPIO_X1_AUD, + PINGRP_GPIO_X3_AUD, + PINGRP_DVFS_CLK, + PINGRP_GPIO_X4_AUD, + PINGRP_GPIO_X5_AUD, + PINGRP_GPIO_X6_AUD, + PINGRP_GPIO_X7_AUD, + PINGRP_SDMMC3_CLK = PINGRP_GPIO_X7_AUD + 3, + PINGRP_SDMMC3_CMD, + PINGRP_SDMMC3_DAT0, + PINGRP_SDMMC3_DAT1, + PINGRP_SDMMC3_DAT2, + PINGRP_SDMMC3_DAT3, + PINGRP_PEX_L0_RST = PINGRP_SDMMC3_DAT3 + 6, /* offset 0x33bc */ + PINGRP_PEX_L0_CLKREQ, + PINGRP_PEX_WAKE, + PINGRP_PEX_L1_RST = PINGRP_PEX_WAKE + 2, + PINGRP_PEX_L1_CLKREQ, + PINGRP_HDMI_CEC = PINGRP_PEX_L1_CLKREQ + 4, /* offset 0x33e0 */ + PINGRP_SDMMC1_WP_N, + PINGRP_SDMMC3_CD_N, + PINGRP_GPIO_W2_AUD, + PINGRP_GPIO_W3_AUD, + PINGRP_USB_VBUS_EN0, + PINGRP_USB_VBUS_EN1, + PINGRP_SDMMC3_CLK_LB_IN, + PINGRP_SDMMC3_CLK_LB_OUT, + PINGRP_GMI_CLK_LB, + PINGRP_RESET_OUT_N, + PINGRP_KB_ROW16, /* offset 0x340c */ + PINGRP_KB_ROW17, + PINGRP_USB_VBUS_EN2, + PINGRP_GPIO_PFF2, + PINGRP_DP_HPD, /* last reg offset = 0x3430 */ + PINGRP_COUNT, +}; + +enum pdrive_pingrp { + PDRIVE_PINGROUP_AO1 = 0, /* offset 0x868 */ + PDRIVE_PINGROUP_AO2, + PDRIVE_PINGROUP_AT1, + PDRIVE_PINGROUP_AT2, + PDRIVE_PINGROUP_AT3, + PDRIVE_PINGROUP_AT4, + PDRIVE_PINGROUP_AT5, + PDRIVE_PINGROUP_CDEV1, + PDRIVE_PINGROUP_CDEV2, + PDRIVE_PINGROUP_DAP1 = 10, /* offset 0x890 */ + PDRIVE_PINGROUP_DAP2, + PDRIVE_PINGROUP_DAP3, + PDRIVE_PINGROUP_DAP4, + PDRIVE_PINGROUP_DBG, + PDRIVE_PINGROUP_SDIO3 = 18, /* offset 0x8B0 */ + PDRIVE_PINGROUP_SPI, + PDRIVE_PINGROUP_UAA, + PDRIVE_PINGROUP_UAB, + PDRIVE_PINGROUP_UART2, + PDRIVE_PINGROUP_UART3, + PDRIVE_PINGROUP_SDIO1 = 33, /* offset 0x8EC */ + PDRIVE_PINGROUP_DDC = 37, /* offset 0x8FC */ + PDRIVE_PINGROUP_GMA, + PDRIVE_PINGROUP_GME = 42, /* offset 0x910 */ + PDRIVE_PINGROUP_GMF, + PDRIVE_PINGROUP_GMG, + PDRIVE_PINGROUP_GMH, + PDRIVE_PINGROUP_OWR, + PDRIVE_PINGROUP_UAD, + PDRIVE_PINGROUP_DEV3 = 49, /* offset 0x92c */ + PDRIVE_PINGROUP_CEC = 52, /* offset 0x938 */ + PDRIVE_PINGROUP_AT6 = 75, /* offset 0x994 */ + PDRIVE_PINGROUP_DAP5, + PDRIVE_PINGROUP_VBUS, + PDRIVE_PINGROUP_AO3, + PDRIVE_PINGROUP_HVC, + PDRIVE_PINGROUP_SDIO4, + PDRIVE_PINGROUP_AO0, + PDRIVE_PINGROUP_COUNT, +}; + +/* + * Functions which can be assigned to each of the pin groups. The values here + * bear no relation to the values programmed into pinmux registers and are + * purely a convenience. The translation is done through a table search. + */ +enum pmux_func { + PMUX_FUNC_AHB_CLK, + PMUX_FUNC_APB_CLK, + PMUX_FUNC_AUDIO_SYNC, + PMUX_FUNC_CRT, + PMUX_FUNC_DAP1, + PMUX_FUNC_DAP2, + PMUX_FUNC_DAP3, + PMUX_FUNC_DAP4, + PMUX_FUNC_DAP5, + PMUX_FUNC_DISPA, + PMUX_FUNC_DISPB, + PMUX_FUNC_EMC_TEST0_DLL, + PMUX_FUNC_EMC_TEST1_DLL, + PMUX_FUNC_GMI, + PMUX_FUNC_GMI_INT, + PMUX_FUNC_HDMI, + PMUX_FUNC_I2C1, + PMUX_FUNC_I2C2, + PMUX_FUNC_I2C3, + PMUX_FUNC_IDE, + PMUX_FUNC_KBC, + PMUX_FUNC_MIO, + PMUX_FUNC_MIPI_HS, + PMUX_FUNC_NAND, + PMUX_FUNC_OSC, + PMUX_FUNC_OWR, + PMUX_FUNC_PCIE, + PMUX_FUNC_PLLA_OUT, + PMUX_FUNC_PLLC_OUT1, + PMUX_FUNC_PLLM_OUT1, + PMUX_FUNC_PLLP_OUT2, + PMUX_FUNC_PLLP_OUT3, + PMUX_FUNC_PLLP_OUT4, + PMUX_FUNC_PWM, + PMUX_FUNC_PWR_INTR, + PMUX_FUNC_PWR_ON, + PMUX_FUNC_RTCK, + PMUX_FUNC_SDMMC1, + PMUX_FUNC_SDMMC2, + PMUX_FUNC_SDMMC3, + PMUX_FUNC_SDMMC4, + PMUX_FUNC_SFLASH, + PMUX_FUNC_SPDIF, + PMUX_FUNC_SPI1, + PMUX_FUNC_SPI2, + PMUX_FUNC_SPI2_ALT, + PMUX_FUNC_SPI3, + PMUX_FUNC_SPI4, + PMUX_FUNC_TRACE, + PMUX_FUNC_TWC, + PMUX_FUNC_UARTA, + PMUX_FUNC_UARTB, + PMUX_FUNC_UARTC, + PMUX_FUNC_UARTD, + PMUX_FUNC_UARTE, + PMUX_FUNC_ULPI, + PMUX_FUNC_VI, + PMUX_FUNC_VI_SENSOR_CLK, + PMUX_FUNC_XIO, + /* End of Tegra2 MUX selectors */ + PMUX_FUNC_BLINK, + PMUX_FUNC_CEC, + PMUX_FUNC_CLK12, + PMUX_FUNC_DAP, + PMUX_FUNC_DAPSDMMC2, + PMUX_FUNC_DDR, + PMUX_FUNC_DEV3, + PMUX_FUNC_DTV, + PMUX_FUNC_VI_ALT1, + PMUX_FUNC_VI_ALT2, + PMUX_FUNC_VI_ALT3, + PMUX_FUNC_EMC_DLL, + PMUX_FUNC_EXTPERIPH1, + PMUX_FUNC_EXTPERIPH2, + PMUX_FUNC_EXTPERIPH3, + PMUX_FUNC_GMI_ALT, + PMUX_FUNC_HDA, + PMUX_FUNC_HSI, + PMUX_FUNC_I2C4, + PMUX_FUNC_I2C5, + PMUX_FUNC_I2CPWR, + PMUX_FUNC_I2S0, + PMUX_FUNC_I2S1, + PMUX_FUNC_I2S2, + PMUX_FUNC_I2S3, + PMUX_FUNC_I2S4, + PMUX_FUNC_NAND_ALT, + PMUX_FUNC_POPSDIO4, + PMUX_FUNC_POPSDMMC4, + PMUX_FUNC_PWM0, + PMUX_FUNC_PWM1, + PMUX_FUNC_PWM2, + PMUX_FUNC_PWM3, + PMUX_FUNC_SATA, + PMUX_FUNC_SPI5, + PMUX_FUNC_SPI6, + PMUX_FUNC_SYSCLK, + PMUX_FUNC_VGP1, + PMUX_FUNC_VGP2, + PMUX_FUNC_VGP3, + PMUX_FUNC_VGP4, + PMUX_FUNC_VGP5, + PMUX_FUNC_VGP6, + /* End of Tegra3 MUX selectors */ + PMUX_FUNC_USB, + PMUX_FUNC_SOC, + PMUX_FUNC_CPU, + PMUX_FUNC_CLK, + PMUX_FUNC_PWRON, + PMUX_FUNC_PMI, + PMUX_FUNC_CLDVFS, + PMUX_FUNC_RESET_OUT_N, + /* End of Tegra114 MUX selectors */ + + PMUX_FUNC_SAFE, + PMUX_FUNC_MAX, + + PMUX_FUNC_INVALID = 0x4000, + PMUX_FUNC_RSVD1 = 0x8000, + PMUX_FUNC_RSVD2 = 0x8001, + PMUX_FUNC_RSVD3 = 0x8002, + PMUX_FUNC_RSVD4 = 0x8003, +}; + +/* return 1 if a pmux_func is in range */ +#define pmux_func_isvalid(func) \ + ((((func) >= 0) && ((func) < PMUX_FUNC_MAX)) || \ + (((func) >= PMUX_FUNC_RSVD1) && ((func) <= PMUX_FUNC_RSVD4))) + +/* return 1 if a pingrp is in range */ +#define pmux_pingrp_isvalid(pin) (((pin) >= 0) && ((pin) < PINGRP_COUNT)) + +/* The pullup/pulldown state of a pin group */ +enum pmux_pull { + PMUX_PULL_NORMAL = 0, + PMUX_PULL_DOWN, + PMUX_PULL_UP, +}; +/* return 1 if a pin_pupd_is in range */ +#define pmux_pin_pupd_isvalid(pupd) (((pupd) >= PMUX_PULL_NORMAL) && \ + ((pupd) <= PMUX_PULL_UP)) + +/* Defines whether a pin group is tristated or in normal operation */ +enum pmux_tristate { + PMUX_TRI_NORMAL = 0, + PMUX_TRI_TRISTATE = 1, +}; +/* return 1 if a pin_tristate_is in range */ +#define pmux_pin_tristate_isvalid(tristate) \ + (((tristate) >= PMUX_TRI_NORMAL) && \ + ((tristate) <= PMUX_TRI_TRISTATE)) + +enum pmux_pin_io { + PMUX_PIN_OUTPUT = 0, + PMUX_PIN_INPUT = 1, + PMUX_PIN_NONE, +}; +/* return 1 if a pin_io_is in range */ +#define pmux_pin_io_isvalid(io) (((io) >= PMUX_PIN_OUTPUT) && \ + ((io) <= PMUX_PIN_INPUT)) + +enum pmux_pin_lock { + PMUX_PIN_LOCK_DEFAULT = 0, + PMUX_PIN_LOCK_DISABLE, + PMUX_PIN_LOCK_ENABLE, +}; +/* return 1 if a pin_lock is in range */ +#define pmux_pin_lock_isvalid(lock) (((lock) >= PMUX_PIN_LOCK_DEFAULT) && \ + ((lock) <= PMUX_PIN_LOCK_ENABLE)) + +enum pmux_pin_od { + PMUX_PIN_OD_DEFAULT = 0, + PMUX_PIN_OD_DISABLE, + PMUX_PIN_OD_ENABLE, +}; +/* return 1 if a pin_od is in range */ +#define pmux_pin_od_isvalid(od) (((od) >= PMUX_PIN_OD_DEFAULT) && \ + ((od) <= PMUX_PIN_OD_ENABLE)) + +enum pmux_pin_ioreset { + PMUX_PIN_IO_RESET_DEFAULT = 0, + PMUX_PIN_IO_RESET_DISABLE, + PMUX_PIN_IO_RESET_ENABLE, +}; +/* return 1 if a pin_ioreset_is in range */ +#define pmux_pin_ioreset_isvalid(ioreset) \ + (((ioreset) >= PMUX_PIN_IO_RESET_DEFAULT) && \ + ((ioreset) <= PMUX_PIN_IO_RESET_ENABLE)) + +enum pmux_pin_rcv_sel { + PMUX_PIN_RCV_SEL_DEFAULT = 0, + PMUX_PIN_RCV_SEL_NORMAL, + PMUX_PIN_RCV_SEL_HIGH, +}; +/* return 1 if a pin_rcv_sel_is in range */ +#define pmux_pin_rcv_sel_isvalid(rcv_sel) \ + (((rcv_sel) >= PMUX_PIN_RCV_SEL_DEFAULT) && \ + ((rcv_sel) <= PMUX_PIN_RCV_SEL_HIGH)) + +/* Available power domains used by pin groups */ +enum pmux_vddio { + PMUX_VDDIO_BB = 0, + PMUX_VDDIO_LCD, + PMUX_VDDIO_VI, + PMUX_VDDIO_UART, + PMUX_VDDIO_DDR, + PMUX_VDDIO_NAND, + PMUX_VDDIO_SYS, + PMUX_VDDIO_AUDIO, + PMUX_VDDIO_SD, + PMUX_VDDIO_CAM, + PMUX_VDDIO_GMI, + PMUX_VDDIO_PEXCTL, + PMUX_VDDIO_SDMMC1, + PMUX_VDDIO_SDMMC3, + PMUX_VDDIO_SDMMC4, + + PMUX_VDDIO_NONE +}; + +#define PGRP_SLWF_NONE -1 +#define PGRP_SLWF_MAX 3 +#define PGRP_SLWR_NONE PGRP_SLWF_NONE +#define PGRP_SLWR_MAX PGRP_SLWF_MAX + +#define PGRP_DRVUP_NONE -1 +#define PGRP_DRVUP_MAX 127 +#define PGRP_DRVDN_NONE PGRP_DRVUP_NONE +#define PGRP_DRVDN_MAX PGRP_DRVUP_MAX + +#define PGRP_SCHMT_NONE -1 +#define PGRP_HSM_NONE PGRP_SCHMT_NONE + +/* return 1 if a padgrp is in range */ +#define pmux_padgrp_isvalid(pd) (((pd) >= 0) && ((pd) < PDRIVE_PINGROUP_COUNT)) + +/* return 1 if a slew-rate rising/falling edge value is in range */ +#define pmux_pad_slw_isvalid(slw) (((slw) == PGRP_SLWF_NONE) || \ + (((slw) >= 0) && ((slw) <= PGRP_SLWF_MAX))) + +/* return 1 if a driver output pull-up/down strength code value is in range */ +#define pmux_pad_drv_isvalid(drv) (((drv) == PGRP_DRVUP_NONE) || \ + (((drv) >= 0) && ((drv) <= PGRP_DRVUP_MAX))) + +/* return 1 if a low-power mode value is in range */ +#define pmux_pad_lpmd_isvalid(lpm) (((lpm) == PGRP_LPMD_NONE) || \ + (((lpm) >= 0) && ((lpm) <= PGRP_LPMD_X))) + +/* Defines a pin group cfg's low-power mode select */ +enum pgrp_lpmd { + PGRP_LPMD_X8 = 0, + PGRP_LPMD_X4, + PGRP_LPMD_X2, + PGRP_LPMD_X, + PGRP_LPMD_NONE = -1, +}; + +/* Defines whether a pin group cfg's schmidt is enabled or not */ +enum pgrp_schmt { + PGRP_SCHMT_DISABLE = 0, + PGRP_SCHMT_ENABLE = 1, +}; + +/* Defines whether a pin group cfg's high-speed mode is enabled or not */ +enum pgrp_hsm { + PGRP_HSM_DISABLE = 0, + PGRP_HSM_ENABLE = 1, +}; + +/* + * This defines the configuration for a pin group's pad control config + */ +struct padctrl_config { + enum pdrive_pingrp padgrp; /* pin group PDRIVE_PINGRP_x */ + int slwf; /* falling edge slew */ + int slwr; /* rising edge slew */ + int drvup; /* pull-up drive strength */ + int drvdn; /* pull-down drive strength */ + enum pgrp_lpmd lpmd; /* low-power mode selection */ + enum pgrp_schmt schmt; /* schmidt enable */ + enum pgrp_hsm hsm; /* high-speed mode enable */ +}; + +/* Tegra124 pin drive group and pin mux registers */ +#define PDRIVE_PINGROUP_OFFSET (0x868 >> 2) +#define PMUX_OFFSET ((0x3000 >> 2) - PDRIVE_PINGROUP_OFFSET - \ + PDRIVE_PINGROUP_COUNT) +struct pmux_tri_ctlr { + uint pmt_reserved0[9]; /* ABP_MISC_PP_ offsets 00-20 */ + uint pmt_cfg_ctl; /* _CONFIG_CTL_0, offset 24 */ + + uint pmt_reserved[528]; /* ABP_MISC_PP_ reserved offs 28-864 */ + + uint pmt_drive[PDRIVE_PINGROUP_COUNT]; /* pin drive grps offs 868 */ + uint pmt_reserved5[PMUX_OFFSET]; + uint pmt_ctl[PINGRP_COUNT]; /* mux/pupd/tri regs, offset 0x3000 */ +}; + +/* + * This defines the configuration for a pin, including the function assigned, + * pull up/down settings and tristate settings. Having set up one of these + * you can call pinmux_config_pingroup() to configure a pin in one step. Also + * available is pinmux_config_table() to configure a list of pins. + */ +struct pingroup_config { + enum pmux_pingrp pingroup; /* pin group PINGRP_... */ + enum pmux_func func; /* function to assign FUNC_... */ + enum pmux_pull pull; /* pull up/down/normal PMUX_PULL_...*/ + enum pmux_tristate tristate; /* tristate or normal PMUX_TRI_... */ + enum pmux_pin_io io; /* input or output PMUX_PIN_... */ + enum pmux_pin_lock lock; /* lock enable/disable PMUX_PIN... */ + enum pmux_pin_od od; /* open-drain or push-pull driver */ + enum pmux_pin_ioreset ioreset; /* input/output reset PMUX_PIN... */ + enum pmux_pin_rcv_sel rcv_sel; /* select between High and Normal */ + /* VIL/VIH receivers */ +}; + +/* Set a pin group to tristate */ +void pinmux_tristate_enable(enum pmux_pingrp pin); + +/* Set a pin group to normal (non tristate) */ +void pinmux_tristate_disable(enum pmux_pingrp pin); + +/* Set the pull up/down feature for a pin group */ +void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd); + +/* Set the mux function for a pin group */ +void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func); + +/* Set the complete configuration for a pin group */ +void pinmux_config_pingroup(struct pingroup_config *config); + +/* Set a pin group to tristate or normal */ +void pinmux_set_tristate(enum pmux_pingrp pin, int enable); + +/* Set a pin group as input or output */ +void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io); + +/** + * Configure a list of pin groups + * + * @param config List of config items + * @param len Number of config items in list + */ +void pinmux_config_table(struct pingroup_config *config, int len); + +/* Set a group of pins from a table */ +void pinmux_init(void); + +/** + * Set the GP pad configs + * + * @param config List of config items + * @param len Number of config items in list + */ +void padgrp_config_table(struct padctrl_config *config, int len); + +#endif /* _TEGRA124_PINMUX_H_ */ diff --git a/arch/arm/include/asm/arch-tegra124/pmu.h b/arch/arm/include/asm/arch-tegra124/pmu.h new file mode 100644 index 0000000..b10100a --- /dev/null +++ b/arch/arm/include/asm/arch-tegra124/pmu.h @@ -0,0 +1,14 @@ +/* + * (C) Copyright 2010-2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA124_PMU_H_ +#define _TEGRA124_PMU_H_ + +/* Set core and CPU voltages to nominal levels */ +int pmu_set_nominal(void); + +#endif /* _TEGRA124_PMU_H_ */ diff --git a/arch/arm/include/asm/arch-tegra124/spl.h b/arch/arm/include/asm/arch-tegra124/spl.h new file mode 100644 index 0000000..e266395 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra124/spl.h @@ -0,0 +1,13 @@ +/* + * (C) Copyright 2010-2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ASM_ARCH_SPL_H_ +#define _ASM_ARCH_SPL_H_ + +#define BOOT_DEVICE_RAM 1 + +#endif /* _ASM_ARCH_SPL_H_ */ diff --git a/arch/arm/include/asm/arch-tegra124/sysctr.h b/arch/arm/include/asm/arch-tegra124/sysctr.h new file mode 100644 index 0000000..3f0309b --- /dev/null +++ b/arch/arm/include/asm/arch-tegra124/sysctr.h @@ -0,0 +1,26 @@ +/* + * (C) Copyright 2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA124_SYSCTR_H_ +#define _TEGRA124_SYSCTR_H_ + +struct sysctr_ctlr { + u32 cntcr; /* 0x00: SYSCTR0_CNTCR Counter Control */ + u32 cntsr; /* 0x04: SYSCTR0_CNTSR Counter Status */ + u32 cntcv0; /* 0x08: SYSCTR0_CNTCV0 Counter Count 31:00 */ + u32 cntcv1; /* 0x0C: SYSCTR0_CNTCV1 Counter Count 63:32 */ + u32 reserved1[4]; /* 0x10 - 0x1C */ + u32 cntfid0; /* 0x20: SYSCTR0_CNTFID0 Freq Table Entry */ + u32 cntfid1; /* 0x24: SYSCTR0_CNTFID1 Freq Table End */ + u32 reserved2[1002]; /* 0x28 - 0xFCC */ + u32 counterid[12]; /* 0xFD0 - 0xFxx CounterID regs, RO */ +}; + +#define TSC_CNTCR_ENABLE (1 << 0) /* Enable */ +#define TSC_CNTCR_HDBG (1 << 1) /* Halt on debug */ + +#endif /* _TEGRA124_SYSCTR_H_ */ diff --git a/arch/arm/include/asm/arch-tegra124/tegra.h b/arch/arm/include/asm/arch-tegra124/tegra.h new file mode 100644 index 0000000..db3d837 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra124/tegra.h @@ -0,0 +1,30 @@ +/* + * (C) Copyright 2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA124_H_ +#define _TEGRA124_H_ + +#define NV_PA_SDRAM_BASE 0x80000000 +#define NV_PA_TSC_BASE 0x700F0000 /* System Counter TSC regs */ +#define NV_PA_MC_BASE 0x70019000 /* Mem Ctlr regs (MCB, etc.) */ +#define NV_PA_AHB_BASE 0x6000C000 /* System regs (AHB, etc.) */ + +#include <asm/arch-tegra/tegra.h> + +#define BCT_ODMDATA_OFFSET 1704 /* offset to ODMDATA word */ + +#undef NVBOOTINFOTABLE_BCTSIZE +#undef NVBOOTINFOTABLE_BCTPTR +#define NVBOOTINFOTABLE_BCTSIZE 0x48 /* BCT size in BIT in IRAM */ +#define NVBOOTINFOTABLE_BCTPTR 0x4C /* BCT pointer in BIT in IRAM */ + +#define MAX_NUM_CPU 4 +#define MCB_EMEM_ARB_OVERRIDE (NV_PA_MC_BASE + 0xE8) + +#define TEGRA_USB1_BASE 0x7D000000 + +#endif /* _TEGRA124_H_ */ diff --git a/arch/arm/include/asm/arch-tegra124/usb.h b/arch/arm/include/asm/arch-tegra124/usb.h new file mode 100644 index 0000000..7a2d785 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra124/usb.h @@ -0,0 +1,268 @@ +/* + * (C) Copyright 2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA124_USB_H_ +#define _TEGRA124_USB_H_ + + +/* USB Controller (USBx_CONTROLLER_) regs */ +struct usb_ctlr { + /* 0x000 */ + uint id; + uint reserved0; + uint host; + uint device; + + /* 0x010 */ + uint txbuf; + uint rxbuf; + uint reserved1[2]; + + /* 0x020 */ + uint reserved2[56]; + + /* 0x100 */ + u16 cap_length; + u16 hci_version; + uint hcs_params; + uint hcc_params; + uint reserved3[5]; + + /* 0x120 */ + uint dci_version; + uint dcc_params; + uint reserved4[2]; + + /* 0x130 */ + uint usb_cmd; + uint usb_sts; + uint usb_intr; + uint frindex; + + /* 0x140 */ + uint reserved5; + uint periodic_list_base; + uint async_list_addr; + uint reserved5_1; + + /* 0x150 */ + uint burst_size; + uint tx_fill_tuning; + uint reserved6; + uint icusb_ctrl; + + /* 0x160 */ + uint ulpi_viewport; + uint reserved7; + uint reserved7_0; + uint reserved7_1; + + /* 0x170 */ + uint reserved; + uint port_sc1; + uint reserved8[6]; + + /* 0x190 */ + uint reserved9[8]; + + /* 0x1b0 */ + uint reserved10; + uint hostpc1_devlc; + uint reserved10_1[2]; + + /* 0x1c0 */ + uint reserved10_2[4]; + + /* 0x1d0 */ + uint reserved10_3[4]; + + /* 0x1e0 */ + uint reserved10_4[4]; + + /* 0x1f0 */ + uint reserved10_5; + uint otgsc; + uint usb_mode; + uint reserved10_6; + + /* 0x200 */ + uint endpt_nak; + uint endpt_nak_enable; + uint endpt_setup_stat; + uint reserved11_1[0x7D]; + + /* 0x400 */ + uint susp_ctrl; + uint phy_vbus_sensors; + uint phy_vbus_wakeup_id; + uint phy_alt_vbus_sys; + + /* 0x410 */ + uint usb1_legacy_ctrl; + uint reserved12[3]; + + /* 0x420 */ + uint reserved13[56]; + + /* 0x500 */ + uint reserved14[64 * 3]; + + /* 0x800 */ + uint utmip_pll_cfg0; + uint utmip_pll_cfg1; + uint utmip_xcvr_cfg0; + uint utmip_bias_cfg0; + + /* 0x810 */ + uint utmip_hsrx_cfg0; + uint utmip_hsrx_cfg1; + uint utmip_fslsrx_cfg0; + uint utmip_fslsrx_cfg1; + + /* 0x820 */ + uint utmip_tx_cfg0; + uint utmip_misc_cfg0; + uint utmip_misc_cfg1; + uint utmip_debounce_cfg0; + + /* 0x830 */ + uint utmip_bat_chrg_cfg0; + uint utmip_spare_cfg0; + uint utmip_xcvr_cfg1; + uint utmip_bias_cfg1; +}; + +/* USB1_LEGACY_CTRL */ +#define USB1_NO_LEGACY_MODE 1 + +#define VBUS_SENSE_CTL_SHIFT 1 +#define VBUS_SENSE_CTL_MASK (3 << VBUS_SENSE_CTL_SHIFT) +#define VBUS_SENSE_CTL_VBUS_WAKEUP 0 +#define VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP 1 +#define VBUS_SENSE_CTL_AB_SESS_VLD 2 +#define VBUS_SENSE_CTL_A_SESS_VLD 3 + +/* USBx_IF_USB_SUSP_CTRL_0 */ +#define UTMIP_PHY_ENB (1 << 12) +#define UTMIP_RESET (1 << 11) +#define USB_PHY_CLK_VALID (1 << 7) +#define USB_SUSP_CLR (1 << 5) + +/* USBx_UTMIP_MISC_CFG0 */ +#define UTMIP_SUSPEND_EXIT_ON_EDGE (1 << 22) + +/* USBx_UTMIP_MISC_CFG1 */ +#define UTMIP_PHY_XTAL_CLOCKEN (1 << 30) + +/* Moved to Clock and Reset register space */ +#define UTMIP_PLLU_STABLE_COUNT_SHIFT 6 +#define UTMIP_PLLU_STABLE_COUNT_MASK \ + (0xfff << UTMIP_PLLU_STABLE_COUNT_SHIFT) +/* Moved to Clock and Reset register space */ +#define UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT 18 +#define UTMIP_PLL_ACTIVE_DLY_COUNT_MASK \ + (0x1f << UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT) + +/* USBx_UTMIP_PLL_CFG1_0 */ +/* Moved to Clock and Reset register space */ +#define UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT 27 +#define UTMIP_PLLU_ENABLE_DLY_COUNT_MASK \ + (0x1f << UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT) +#define UTMIP_XTAL_FREQ_COUNT_SHIFT 0 +#define UTMIP_XTAL_FREQ_COUNT_MASK 0xfff + +/* USBx_UTMIP_BIAS_CFG0_0 */ +#define UTMIP_HSDISCON_LEVEL_MSB (1 << 24) +#define UTMIP_OTGPD (1 << 11) +#define UTMIP_BIASPD (1 << 10) +#define UTMIP_HSDISCON_LEVEL_SHIFT 2 +#define UTMIP_HSDISCON_LEVEL_MASK \ + (0x3 << UTMIP_HSDISCON_LEVEL_SHIFT) +#define UTMIP_HSSQUELCH_LEVEL_SHIFT 0 +#define UTMIP_HSSQUELCH_LEVEL_MASK \ + (0x3 << UTMIP_HSSQUELCH_LEVEL_SHIFT) + +/* USBx_UTMIP_BIAS_CFG1_0 */ +#define UTMIP_FORCE_PDTRK_POWERDOWN 1 +#define UTMIP_BIAS_PDTRK_COUNT_SHIFT 3 +#define UTMIP_BIAS_PDTRK_COUNT_MASK \ + (0x1f << UTMIP_BIAS_PDTRK_COUNT_SHIFT) + +/* USBx_UTMIP_DEBOUNCE_CFG0_0 */ +#define UTMIP_DEBOUNCE_CFG0_SHIFT 0 +#define UTMIP_DEBOUNCE_CFG0_MASK 0xffff + +/* USBx_UTMIP_TX_CFG0_0 */ +#define UTMIP_FS_PREAMBLE_J (1 << 19) + +/* USBx_UTMIP_BAT_CHRG_CFG0_0 */ +#define UTMIP_PD_CHRG 1 + +/* USBx_UTMIP_SPARE_CFG0_0 */ +#define FUSE_SETUP_SEL (1 << 3) + +/* USBx_UTMIP_HSRX_CFG0_0 */ +#define UTMIP_IDLE_WAIT_SHIFT 15 +#define UTMIP_IDLE_WAIT_MASK (0x1f << UTMIP_IDLE_WAIT_SHIFT) +#define UTMIP_ELASTIC_LIMIT_SHIFT 10 +#define UTMIP_ELASTIC_LIMIT_MASK \ + (0x1f << UTMIP_ELASTIC_LIMIT_SHIFT) + +/* USBx_UTMIP_HSRX_CFG0_1 */ +#define UTMIP_HS_SYNC_START_DLY_SHIFT 1 +#define UTMIP_HS_SYNC_START_DLY_MASK \ + (0x1f << UTMIP_HS_SYNC_START_DLY_SHIFT) + +/* USBx_CONTROLLER_2_USB2D_ICUSB_CTRL_0 */ +#define IC_ENB1 (1 << 3) + +/* PORTSC1, USB1, defined for Tegra20 to avoid compiling error */ +#define PTS1_SHIFT 31 +#define PTS1_MASK (1 << PTS1_SHIFT) +#define STS1 (1 << 30) + +/* USB2D_HOSTPC1_DEVLC_0 */ +#define PTS_SHIFT 29 +#define PTS_MASK (0x7U << PTS_SHIFT) +#define PTS_UTMI 0 +#define PTS_RESERVED 1 +#define PTS_ULPI 2 +#define PTS_ICUSB_SER 3 +#define PTS_HSIC 4 + +#define STS (1 << 28) + +/* SB2_CONTROLLER_2_USB2D_PORTSC1_0 */ +#define WKOC (1 << 22) +#define WKDS (1 << 21) +#define WKCN (1 << 20) + +/* USBx_UTMIP_XCVR_CFG0_0 */ +#define UTMIP_FORCE_PD_POWERDOWN (1 << 14) +#define UTMIP_FORCE_PD2_POWERDOWN (1 << 16) +#define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18) +#define UTMIP_XCVR_LSBIAS_SE (1 << 21) +#define UTMIP_XCVR_HSSLEW_MSB_SHIFT 25 +#define UTMIP_XCVR_HSSLEW_MSB_MASK \ + (0x7f << UTMIP_XCVR_HSSLEW_MSB_SHIFT) +#define UTMIP_XCVR_SETUP_MSB_SHIFT 22 +#define UTMIP_XCVR_SETUP_MSB_MASK (0x7 << UTMIP_XCVR_SETUP_MSB_SHIFT) +#define UTMIP_XCVR_SETUP_SHIFT 0 +#define UTMIP_XCVR_SETUP_MASK (0xf << UTMIP_XCVR_SETUP_SHIFT) + +/* USBx_UTMIP_XCVR_CFG1_0 */ +#define UTMIP_XCVR_TERM_RANGE_ADJ_SHIFT 18 +#define UTMIP_XCVR_TERM_RANGE_ADJ_MASK \ + (0xf << UTMIP_XCVR_TERM_RANGE_ADJ_SHIFT) +#define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0) +#define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2) +#define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4) + +/* USB3_IF_USB_PHY_VBUS_SENSORS_0 */ +#define VBUS_VLD_STS (1 << 26) + +#endif /* _TEGRA124_USB_H_ */ diff --git a/arch/arm/include/asm/arch-zynq/clk.h b/arch/arm/include/asm/arch-zynq/clk.h new file mode 100644 index 0000000..250c5bc --- /dev/null +++ b/arch/arm/include/asm/arch-zynq/clk.h @@ -0,0 +1,29 @@ +/* + * Copyright (c) 2013 Xilinx Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ZYNQ_CLK_H_ +#define _ZYNQ_CLK_H_ + +enum zynq_clk { + armpll_clk, ddrpll_clk, iopll_clk, + cpu_6or4x_clk, cpu_3or2x_clk, cpu_2x_clk, cpu_1x_clk, + ddr2x_clk, ddr3x_clk, dci_clk, + lqspi_clk, smc_clk, pcap_clk, gem0_clk, gem1_clk, + fclk0_clk, fclk1_clk, fclk2_clk, fclk3_clk, can0_clk, can1_clk, + sdio0_clk, sdio1_clk, uart0_clk, uart1_clk, spi0_clk, spi1_clk, dma_clk, + usb0_aper_clk, usb1_aper_clk, gem0_aper_clk, gem1_aper_clk, + sdio0_aper_clk, sdio1_aper_clk, spi0_aper_clk, spi1_aper_clk, + can0_aper_clk, can1_aper_clk, i2c0_aper_clk, i2c1_aper_clk, + uart0_aper_clk, uart1_aper_clk, gpio_aper_clk, lqspi_aper_clk, + smc_aper_clk, swdt_clk, dbg_trc_clk, dbg_apb_clk, clk_max}; + +void zynq_clk_early_init(void); +int zynq_clk_set_rate(enum zynq_clk clk, unsigned long rate); +unsigned long zynq_clk_get_rate(enum zynq_clk clk); +const char *zynq_clk_get_name(enum zynq_clk clk); +unsigned long get_uart_clk(int dev_id); + +#endif diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h index cd69677..39184da 100644 --- a/arch/arm/include/asm/arch-zynq/hardware.h +++ b/arch/arm/include/asm/arch-zynq/hardware.h @@ -7,6 +7,8 @@ #ifndef _ASM_ARCH_HARDWARE_H #define _ASM_ARCH_HARDWARE_H +#define ZYNQ_SERIAL_BASEADDR0 0xE0000000 +#define ZYNQ_SERIAL_BASEADDR1 0xE0001000 #define ZYNQ_SYS_CTRL_BASEADDR 0xF8000000 #define ZYNQ_DEV_CFG_APB_BASEADDR 0xF8007000 #define ZYNQ_SCU_BASEADDR 0xF8F00000 @@ -21,17 +23,51 @@ #define ZYNQ_SPI_BASEADDR1 0xE0007000 #define ZYNQ_DDRC_BASEADDR 0xF8006000 +/* Bootmode setting values */ +#define ZYNQ_BM_MASK 0xF +#define ZYNQ_BM_NOR 0x2 +#define ZYNQ_BM_SD 0x5 +#define ZYNQ_BM_JTAG 0x0 + /* Reflect slcr offsets */ struct slcr_regs { u32 scl; /* 0x0 */ u32 slcr_lock; /* 0x4 */ u32 slcr_unlock; /* 0x8 */ - u32 reserved0[75]; + u32 reserved0_1[61]; + u32 arm_pll_ctrl; /* 0x100 */ + u32 ddr_pll_ctrl; /* 0x104 */ + u32 io_pll_ctrl; /* 0x108 */ + u32 reserved0_2[5]; + u32 arm_clk_ctrl; /* 0x120 */ + u32 ddr_clk_ctrl; /* 0x124 */ + u32 dci_clk_ctrl; /* 0x128 */ + u32 aper_clk_ctrl; /* 0x12c */ + u32 reserved0_3[2]; u32 gem0_rclk_ctrl; /* 0x138 */ u32 gem1_rclk_ctrl; /* 0x13c */ u32 gem0_clk_ctrl; /* 0x140 */ u32 gem1_clk_ctrl; /* 0x144 */ - u32 reserved1[46]; + u32 smc_clk_ctrl; /* 0x148 */ + u32 lqspi_clk_ctrl; /* 0x14c */ + u32 sdio_clk_ctrl; /* 0x150 */ + u32 uart_clk_ctrl; /* 0x154 */ + u32 spi_clk_ctrl; /* 0x158 */ + u32 can_clk_ctrl; /* 0x15c */ + u32 can_mioclk_ctrl; /* 0x160 */ + u32 dbg_clk_ctrl; /* 0x164 */ + u32 pcap_clk_ctrl; /* 0x168 */ + u32 reserved0_4[1]; + u32 fpga0_clk_ctrl; /* 0x170 */ + u32 reserved0_5[3]; + u32 fpga1_clk_ctrl; /* 0x180 */ + u32 reserved0_6[3]; + u32 fpga2_clk_ctrl; /* 0x190 */ + u32 reserved0_7[3]; + u32 fpga3_clk_ctrl; /* 0x1a0 */ + u32 reserved0_8[8]; + u32 clk_621_true; /* 0x1c4 */ + u32 reserved1[14]; u32 pss_rst_ctrl; /* 0x200 */ u32 reserved2[15]; u32 fpga_rst_ctrl; /* 0x240 */ diff --git a/arch/arm/include/asm/arch-zynq/spl.h b/arch/arm/include/asm/arch-zynq/spl.h new file mode 100644 index 0000000..5789d28 --- /dev/null +++ b/arch/arm/include/asm/arch-zynq/spl.h @@ -0,0 +1,18 @@ +/* + * (C) Copyright 2014 Xilinx, Inc. Michal Simek + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef _ASM_ARCH_SPL_H_ +#define _ASM_ARCH_SPL_H_ + +extern void ps7_init(void); + +#define BOOT_DEVICE_NONE 0 +#define BOOT_DEVICE_RAM 1 +#define BOOT_DEVICE_SPI 2 +#define BOOT_DEVICE_MMC1 3 +#define BOOT_DEVICE_MMC2 4 +#define BOOT_DEVICE_MMC2_2 5 + +#endif diff --git a/arch/arm/include/asm/arch-zynq/sys_proto.h b/arch/arm/include/asm/arch-zynq/sys_proto.h index 8f925af..0a2ba05 100644 --- a/arch/arm/include/asm/arch-zynq/sys_proto.h +++ b/arch/arm/include/asm/arch-zynq/sys_proto.h @@ -10,7 +10,7 @@ extern void zynq_slcr_lock(void); extern void zynq_slcr_unlock(void); extern void zynq_slcr_cpu_reset(void); -extern void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk); +extern void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate); extern void zynq_slcr_devcfg_disable(void); extern void zynq_slcr_devcfg_enable(void); extern u32 zynq_slcr_get_boot_mode(void); diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index 60e8726..63e4ad5 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -32,9 +32,6 @@ struct arch_global_data { unsigned long tbl; unsigned long lastinc; unsigned long long timer_reset_value; -#ifdef CONFIG_IXP425 - unsigned long timestamp; -#endif #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) unsigned long tlb_addr; unsigned long tlb_size; diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index a78f990..04925bc 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -567,7 +567,6 @@ u32 omap_ddr_clk(void); u32 get_sys_clk_index(void); void enable_basic_clocks(void); void enable_basic_uboot_clocks(void); -void enable_non_essential_clocks(void); void scale_vcores(struct vcores_data const *); u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic); void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic); @@ -643,6 +642,7 @@ static inline u8 is_dra7xx(void) /* DRA7XX */ #define DRA752_ES1_0 0x07520100 +#define DRA752_ES1_1 0x07520110 /* * SRAM scratch space entries diff --git a/arch/arm/include/asm/pl310.h b/arch/arm/include/asm/pl310.h index f41ad8c..ddc245b 100644 --- a/arch/arm/include/asm/pl310.h +++ b/arch/arm/include/asm/pl310.h @@ -12,6 +12,9 @@ /* Register bit fields */ #define PL310_AUX_CTRL_ASSOCIATIVITY_MASK (1 << 16) +#define L2X0_DYNAMIC_CLK_GATING_EN (1 << 1) +#define L2X0_STNDBY_MODE_EN (1 << 0) +#define L2X0_CTRL_EN 1 struct pl310_regs { u32 pl310_cache_id; @@ -47,6 +50,24 @@ struct pl310_regs { u32 pad9[1]; u32 pl310_clean_inv_line_idx; u32 pl310_clean_inv_way; + u32 pad10[64]; + u32 pl310_lockdown_dbase; + u32 pl310_lockdown_ibase; + u32 pad11[190]; + u32 pl310_addr_filter_start; + u32 pl310_addr_filter_end; + u32 pad12[190]; + u32 pl310_test_operation; + u32 pad13[3]; + u32 pl310_line_data; + u32 pad14[7]; + u32 pl310_line_tag; + u32 pad15[3]; + u32 pl310_debug_ctrl; + u32 pad16[7]; + u32 pl310_prefetch_ctrl; + u32 pad17[7]; + u32 pl310_power_ctrl; }; void pl310_inval_all(void); diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index b770e25..ba62394 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -197,8 +197,6 @@ static int arm_pci_init(void) */ typedef int (init_fnc_t) (void); -int print_cpuinfo(void); - void __dram_init_banksize(void) { gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; @@ -250,9 +248,7 @@ init_fnc_t *init_sequence[] = { serial_init, /* serial communications setup */ console_init_f, /* stage 1 init of console */ display_banner, /* say that we are here */ -#if defined(CONFIG_DISPLAY_CPUINFO) print_cpuinfo, /* display cpu info (and speed) */ -#endif #if defined(CONFIG_DISPLAY_BOARDINFO) checkboard, /* display board info */ #endif @@ -280,7 +276,7 @@ void board_init_f(ulong bootflag) gd->mon_len = _bss_end_ofs; #ifdef CONFIG_OF_EMBED /* Get a pointer to the FDT */ - gd->fdt_blob = _binary_dt_dtb_start; + gd->fdt_blob = __dtb_db_begin; #elif defined CONFIG_OF_SEPARATE /* FDT is at end of image */ gd->fdt_blob = (void *)(_end_ofs + _TEXT_BASE); @@ -322,7 +318,7 @@ void board_init_f(ulong bootflag) gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE; #endif - addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size; + addr = CONFIG_SYS_SDRAM_BASE + get_effective_memsize(); #ifdef CONFIG_LOGBUFFER #ifndef CONFIG_ALT_LB_ADDR diff --git a/arch/blackfin/config.mk b/arch/blackfin/config.mk index 73fa798..c752025 100644 --- a/arch/blackfin/config.mk +++ b/arch/blackfin/config.mk @@ -12,7 +12,7 @@ CONFIG_STANDALONE_LOAD_ADDR ?= 0x1000 -m elf32bfin ifeq ($(CONFIG_BFIN_CPU),) CONFIG_BFIN_CPU := \ $(shell awk '$$2 == "CONFIG_BFIN_CPU" { print $$3 }' \ - $(src)include/configs/$(BOARD).h) + $(srctree)/include/configs/$(BOARD).h) else CONFIG_BFIN_CPU := $(strip $(CONFIG_BFIN_CPU:"%"=%)) endif @@ -28,10 +28,10 @@ PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections PLATFORM_RELFLAGS += -mcpu=$(CONFIG_BFIN_CPU) ifneq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS) -ALL-y += $(obj)u-boot.ldr +ALL-y += u-boot.ldr endif ifeq ($(CONFIG_ENV_IS_EMBEDDED_IN_LDR),y) -CREATE_LDR_ENV = $(obj)tools/envcrc --binary > $(obj)env-ldr.o +CREATE_LDR_ENV = tools/envcrc --binary > env-ldr.o HOSTCFLAGS_NOPED_ADSP := \ $(shell $(CPP) -dD - -mcpu=$(CONFIG_BFIN_CPU) </dev/null \ | awk '$$2 ~ /ADSP/ { print "-D" $$2 }') @@ -47,10 +47,10 @@ LDR_FLAGS-$(CONFIG_BFIN_BOOTROM_USES_EVT1) += -J LDR_FLAGS += --bmode $(subst BFIN_BOOT_,,$(CONFIG_BFIN_BOOT_MODE)) LDR_FLAGS += --use-vmas -LDR_FLAGS += --initcode $(obj)$(CPUDIR)/initcode.o +LDR_FLAGS += --initcode $(CPUDIR)/initcode.o ifneq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_UART) LDR_FLAGS-$(CONFIG_ENV_IS_EMBEDDED_IN_LDR) += \ - --punchit $$(($(CONFIG_ENV_OFFSET))):$$(($(CONFIG_ENV_SIZE))):$(obj)env-ldr.o + --punchit $$(($(CONFIG_ENV_OFFSET))):$$(($(CONFIG_ENV_SIZE))):env-ldr.o endif ifneq (,$(findstring s,$(MAKEFLAGS))) LDR_FLAGS += --quiet diff --git a/arch/blackfin/cpu/Makefile b/arch/blackfin/cpu/Makefile index a61594a..cfbcd31 100644 --- a/arch/blackfin/cpu/Makefile +++ b/arch/blackfin/cpu/Makefile @@ -22,12 +22,13 @@ obj-y += reset.o obj-y += traps.o extra-y += check_initcode +clean-files := init.lds # make sure our initcode (which goes into LDR) does not # have relocs or external references -$(obj)initcode.o: CFLAGS += -fno-function-sections -fno-data-sections +CFLAGS_REMOVE_initcode.o := -ffunction-sections -fdata-sections READINIT = env LC_ALL=C $(CROSS_COMPILE)readelf -s $< -$(obj)check_initcode: $(obj)initcode.o +$(obj)/check_initcode: $(obj)/initcode.o ifneq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS) @if $(READINIT) | grep '\<GLOBAL\>.*\<UND\>' ; then \ echo "$< contains external references!" 1>&2 ; \ @@ -35,7 +36,10 @@ ifneq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS) fi endif -$(obj)init.lds: init.lds.S - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P $^ -o $@ -$(obj)init.elf: $(obj)init.lds $(obj)init.o $(obj)initcode.o - $(LD) $(LDFLAGS) -T $^ -o $@ +CPPFLAGS_init.lds := -ansi + +quiet_cmd_link_init = LD $@ + cmd_link_init = $(LD) $(LDFLAGS) -T $^ -o $@ +$(obj)/init.elf: $(obj)/init.lds $(obj)/init.o $(obj)/initcode.o + $(call if_changed,link_init) +targets += init.lds init.o diff --git a/arch/blackfin/include/asm/blackfin_local.h b/arch/blackfin/include/asm/blackfin_local.h index 4d6eeab..868c82e 100644 --- a/arch/blackfin/include/asm/blackfin_local.h +++ b/arch/blackfin/include/asm/blackfin_local.h @@ -42,13 +42,6 @@ # include <linux/types.h> -extern u_long get_vco(void); -extern u_long get_cclk(void); -extern u_long get_sclk(void); -extern u_long get_sclk0(void); -extern u_long get_sclk1(void); -extern u_long get_dclk(void); - # define bfin_revid() (bfin_read_CHIPID() >> 28) extern int bfin_os_log_check(void); diff --git a/arch/blackfin/include/asm/clock.h b/arch/blackfin/include/asm/clock.h index fc84fe4..59d3faa 100644 --- a/arch/blackfin/include/asm/clock.h +++ b/arch/blackfin/include/asm/clock.h @@ -68,10 +68,21 @@ static inline uint32_t early_get_uart_clk(void) return uclk; } +extern u_long get_vco(void); +extern u_long get_cclk(void); +extern u_long get_sclk(void); + #ifdef CGU_DIV +extern u_long get_sclk0(void); +extern u_long get_sclk1(void); +extern u_long get_dclk(void); # define get_uart_clk get_sclk0 +# define get_i2c_clk get_sclk0 +# define get_spi_clk get_sclk0 #else # define get_uart_clk get_sclk +# define get_i2c_clk get_sclk +# define get_spi_clk get_sclk #endif #endif diff --git a/arch/blackfin/include/asm/twi.h b/arch/blackfin/include/asm/twi.h new file mode 100644 index 0000000..922cdbd --- /dev/null +++ b/arch/blackfin/include/asm/twi.h @@ -0,0 +1,15 @@ +/* + * i2c.c - driver for Blackfin on-chip TWI/I2C + * + * Copyright (c) 2006-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __ARCH_TWI_H +#define __ARCH_TWI_H + +#include <asm/blackfin.h> +#include <asm/mach-common/bits/twi.h> + +#endif diff --git a/arch/blackfin/lib/Makefile b/arch/blackfin/lib/Makefile index a5c552f..4ba7bf6 100644 --- a/arch/blackfin/lib/Makefile +++ b/arch/blackfin/lib/Makefile @@ -9,7 +9,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS += -DBFIN_BOARD_NAME='"$(BOARD)"' +# Unnecessary. +# Use CONFIG_SYS_BOARD instead of BFIN_BOARD_NAME +# and delete this. +ccflags-y += -DBFIN_BOARD_NAME='"$(BOARD)"' obj-y += ins.o obj-y += memcmp.o diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c index facbc7a..6234201 100644 --- a/arch/blackfin/lib/board.c +++ b/arch/blackfin/lib/board.c @@ -23,6 +23,7 @@ #include <asm/cplb.h> #include <asm/mach-common/bits/mpu.h> +#include <asm/clock.h> #include <kgdb.h> #ifdef CONFIG_CMD_NAND diff --git a/arch/m68k/cpu/mcf5227x/Makefile b/arch/m68k/cpu/mcf5227x/Makefile index a47fd56..e0c5db6 100644 --- a/arch/m68k/cpu/mcf5227x/Makefile +++ b/arch/m68k/cpu/mcf5227x/Makefile @@ -5,7 +5,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -# CFLAGS += -DET_DEBUG +# ccflags-y += -DET_DEBUG extra-y = start.o obj-y = cpu.o speed.o cpu_init.o interrupts.o diff --git a/arch/m68k/cpu/mcf523x/Makefile b/arch/m68k/cpu/mcf523x/Makefile index a47fd56..e0c5db6 100644 --- a/arch/m68k/cpu/mcf523x/Makefile +++ b/arch/m68k/cpu/mcf523x/Makefile @@ -5,7 +5,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -# CFLAGS += -DET_DEBUG +# ccflags-y += -DET_DEBUG extra-y = start.o obj-y = cpu.o speed.o cpu_init.o interrupts.o diff --git a/arch/m68k/cpu/mcf52x2/Makefile b/arch/m68k/cpu/mcf52x2/Makefile index d9bf900..b92fd86 100644 --- a/arch/m68k/cpu/mcf52x2/Makefile +++ b/arch/m68k/cpu/mcf52x2/Makefile @@ -5,7 +5,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -# CFLAGS += -DET_DEBUG +# ccflags-y += -DET_DEBUG extra-y = start.o obj-y = interrupts.o cpu.o speed.o cpu_init.o diff --git a/arch/m68k/cpu/mcf532x/Makefile b/arch/m68k/cpu/mcf532x/Makefile index 97aa3f1..9c53c50 100644 --- a/arch/m68k/cpu/mcf532x/Makefile +++ b/arch/m68k/cpu/mcf532x/Makefile @@ -5,7 +5,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -# CFLAGS += -DET_DEBUG +# ccflags-y += -DET_DEBUG extra-y := start.o obj-y = cpu.o speed.o cpu_init.o interrupts.o diff --git a/arch/m68k/cpu/mcf5445x/Makefile b/arch/m68k/cpu/mcf5445x/Makefile index b506719..9be91ed 100644 --- a/arch/m68k/cpu/mcf5445x/Makefile +++ b/arch/m68k/cpu/mcf5445x/Makefile @@ -5,7 +5,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -# CFLAGS += -DET_DEBUG +# ccflags-y += -DET_DEBUG extra-y = start.o obj-y = cpu.o speed.o cpu_init.o interrupts.o pci.o diff --git a/arch/m68k/cpu/mcf547x_8x/Makefile b/arch/m68k/cpu/mcf547x_8x/Makefile index 0fa50bf..4f82099 100644 --- a/arch/m68k/cpu/mcf547x_8x/Makefile +++ b/arch/m68k/cpu/mcf547x_8x/Makefile @@ -5,7 +5,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -# CFLAGS += -DET_DEBUG +# ccflags-y += -DET_DEBUG extra-y = start.o obj-y = cpu.o speed.o cpu_init.o pci.o interrupts.o slicetimer.o diff --git a/arch/microblaze/dts/.gitignore b/arch/microblaze/dts/.gitignore new file mode 100644 index 0000000..b60ed20 --- /dev/null +++ b/arch/microblaze/dts/.gitignore @@ -0,0 +1 @@ +*.dtb diff --git a/arch/microblaze/dts/Makefile b/arch/microblaze/dts/Makefile new file mode 100644 index 0000000..6d4a11f --- /dev/null +++ b/arch/microblaze/dts/Makefile @@ -0,0 +1,11 @@ +dtb-y += microblaze-generic.dtb + +targets += $(dtb-y) + +DTC_FLAGS += -R 4 -p 0x1000 + +PHONY += dtbs +dtbs: $(addprefix $(obj)/, $(dtb-y)) + @: + +clean-files := *.dtb diff --git a/arch/microblaze/dts/microblaze-generic.dts b/arch/microblaze/dts/microblaze-generic.dts new file mode 100644 index 0000000..2033309 --- /dev/null +++ b/arch/microblaze/dts/microblaze-generic.dts @@ -0,0 +1,7 @@ +/dts-v1/; +/ { + #address-cells = <1>; + #size-cells = <1>; + aliases { + } ; +} ; diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c index 59956a8..fafeeae 100644 --- a/arch/microblaze/lib/board.c +++ b/arch/microblaze/lib/board.c @@ -87,7 +87,7 @@ void board_init_f(ulong not_used) #ifdef CONFIG_OF_EMBED /* Get a pointer to the FDT */ - gd->fdt_blob = _binary_dt_dtb_start; + gd->fdt_blob = __dtb_dt_begin; #elif defined CONFIG_OF_SEPARATE /* FDT is at end of image */ gd->fdt_blob = (void *)__end; diff --git a/arch/microblaze/lib/time.c b/arch/microblaze/lib/time.c deleted file mode 100644 index e69de29..0000000 --- a/arch/microblaze/lib/time.c +++ /dev/null diff --git a/arch/mips/config.mk b/arch/mips/config.mk index c3f81b5..2abdebb 100644 --- a/arch/mips/config.mk +++ b/arch/mips/config.mk @@ -50,4 +50,4 @@ PLATFORM_CPPFLAGS += -msoft-float PLATFORM_LDFLAGS += -G 0 -static -n -nostdlib $(ENDIANNESS) PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections LDFLAGS_FINAL += --gc-sections -pie -OBJCFLAGS += --remove-section=.dynsym +OBJCOPYFLAGS += --remove-section=.dynsym diff --git a/arch/mips/cpu/mips32/config.mk b/arch/mips/cpu/mips32/config.mk index 067f871..7ee7faa 100644 --- a/arch/mips/cpu/mips32/config.mk +++ b/arch/mips/cpu/mips32/config.mk @@ -21,4 +21,4 @@ else PLATFORM_LDFLAGS += -m elf32ltsmip endif -CONFIG_STANDALONE_LOAD_ADDR ?= 0x80200000 -T mips.lds +CONFIG_STANDALONE_LOAD_ADDR ?= 0x80200000 -T $(srctree)/$(src)/mips.lds diff --git a/arch/mips/cpu/mips64/config.mk b/arch/mips/cpu/mips64/config.mk index d1a8b2c..02113a1 100644 --- a/arch/mips/cpu/mips64/config.mk +++ b/arch/mips/cpu/mips64/config.mk @@ -21,4 +21,4 @@ else PLATFORM_LDFLAGS += -m elf64ltsmip endif -CONFIG_STANDALONE_LOAD_ADDR ?= 0xffffffff80200000 -T mips64.lds +CONFIG_STANDALONE_LOAD_ADDR ?= 0xffffffff80200000 -T $(srctree)/$(src)/mips64.lds diff --git a/arch/mips/cpu/xburst/config.mk b/arch/mips/cpu/xburst/config.mk index d81da21..00b0fd9 100644 --- a/arch/mips/cpu/xburst/config.mk +++ b/arch/mips/cpu/xburst/config.mk @@ -12,4 +12,4 @@ else PLATFORM_LDFLAGS += -m elf32ltsmip endif -CONFIG_STANDALONE_LOAD_ADDR ?= 0x80200000 -T mips.lds +CONFIG_STANDALONE_LOAD_ADDR ?= 0x80200000 -T $(srctree)/$(src)/mips.lds diff --git a/arch/nds32/config.mk b/arch/nds32/config.mk index e93e3a8..550f8a4 100644 --- a/arch/nds32/config.mk +++ b/arch/nds32/config.mk @@ -10,7 +10,7 @@ CROSS_COMPILE ?= nds32le-linux- -CONFIG_STANDALONE_LOAD_ADDR = 0x300000 -T nds32.lds +CONFIG_STANDALONE_LOAD_ADDR = 0x300000 -T $(srctree)/$(src)/nds32.lds PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -mrelax PLATFORM_RELFLAGS += -gdwarf-2 diff --git a/arch/nds32/cpu/n1213/Makefile b/arch/nds32/cpu/n1213/Makefile index bb3550e..206d304 100644 --- a/arch/nds32/cpu/n1213/Makefile +++ b/arch/nds32/cpu/n1213/Makefile @@ -9,4 +9,7 @@ # SPDX-License-Identifier: GPL-2.0+ # +# necessary to create built-in.o +obj- := __dummy__.o + extra-y = start.o diff --git a/arch/powerpc/cpu/mpc512x/traps.c b/arch/powerpc/cpu/mpc512x/traps.c index 1016991..9f5bcd7 100644 --- a/arch/powerpc/cpu/mpc512x/traps.c +++ b/arch/powerpc/cpu/mpc512x/traps.c @@ -27,7 +27,6 @@ extern unsigned long search_exception_table(unsigned long); * amount of memory on the system if we're unable to keep all * the memory mapped in. */ -extern ulong get_effective_memsize(void); #define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize()) /* diff --git a/arch/powerpc/cpu/mpc85xx/traps.c b/arch/powerpc/cpu/mpc85xx/traps.c index 3ef6e4a..24adbc3 100644 --- a/arch/powerpc/cpu/mpc85xx/traps.c +++ b/arch/powerpc/cpu/mpc85xx/traps.c @@ -35,7 +35,6 @@ extern unsigned long search_exception_table(unsigned long); * amount of memory on the system if we're unable to keep all * the memory mapped in. */ -extern ulong get_effective_memsize(void); #define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize()) static __inline__ void set_tsr(unsigned long val) diff --git a/arch/powerpc/cpu/mpc86xx/traps.c b/arch/powerpc/cpu/mpc86xx/traps.c index 0b7ea3b..92fb537 100644 --- a/arch/powerpc/cpu/mpc86xx/traps.c +++ b/arch/powerpc/cpu/mpc86xx/traps.c @@ -29,7 +29,6 @@ extern unsigned long search_exception_table(unsigned long); * amount of memory on the system if we're unable to keep all * the memory mapped in. */ -extern ulong get_effective_memsize(void); #define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize()) /* diff --git a/arch/powerpc/cpu/mpc8xx/Makefile b/arch/powerpc/cpu/mpc8xx/Makefile index d40bdab..f83fd5e 100644 --- a/arch/powerpc/cpu/mpc8xx/Makefile +++ b/arch/powerpc/cpu/mpc8xx/Makefile @@ -5,7 +5,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -# CFLAGS += -DET_DEBUG +# ccflags-y += -DET_DEBUG extra-y += start.o extra-y += traps.o diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index a706d3c..e6d8be5 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -54,11 +54,11 @@ ifndef CONFIG_SPL_BUILD # Workaround for local bus unaligned access problems # on MPC512x and MPC5200 ifdef CONFIG_MPC512X -$(obj)ppcstring.o: AFLAGS += -Dmemcpy=__memcpy +AFLAGS_ppcstring.o += -Dmemcpy=__memcpy obj-y += memcpy_mpc5200.o endif ifdef CONFIG_MPC5200 -$(obj)ppcstring.o: AFLAGS += -Dmemcpy=__memcpy +AFLAGS_ppcstring.o += -Dmemcpy=__memcpy obj-y += memcpy_mpc5200.o endif endif diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c index 34bbfca..13d761c 100644 --- a/arch/powerpc/lib/board.c +++ b/arch/powerpc/lib/board.c @@ -312,17 +312,6 @@ static init_fnc_t *init_sequence[] = { NULL, /* Terminate this list */ }; -ulong get_effective_memsize(void) -{ -#ifndef CONFIG_VERY_BIG_RAM - return gd->ram_size; -#else - /* limit stack to what we can reasonable map */ - return ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ? - CONFIG_MAX_MEM_MAPPED : gd->ram_size); -#endif -} - static int __fixup_cpu(void) { return 0; @@ -343,13 +332,6 @@ int fixup_cpu(void) __attribute__((weak, alias("__fixup_cpu"))); * initialized, and stack space is limited to a few kB. */ -#ifdef CONFIG_LOGBUFFER -unsigned long logbuffer_base(void) -{ - return CONFIG_SYS_SDRAM_BASE + get_effective_memsize() - LOGBUFF_LEN; -} -#endif - void board_init_f(ulong bootflag) { bd_t *bd; diff --git a/arch/powerpc/lib/bootm.c b/arch/powerpc/lib/bootm.c index 41fc8f7..c08b62c 100644 --- a/arch/powerpc/lib/bootm.c +++ b/arch/powerpc/lib/bootm.c @@ -30,7 +30,6 @@ DECLARE_GLOBAL_DATA_PTR; -extern ulong get_effective_memsize(void); static ulong get_sp (void); extern void ft_fixup_num_cores(void *blob); static void set_clocks_in_mhz (bd_t *kbd); diff --git a/arch/sandbox/config.mk b/arch/sandbox/config.mk index 6142dd4..23b057e 100644 --- a/arch/sandbox/config.mk +++ b/arch/sandbox/config.mk @@ -7,3 +7,7 @@ PLATFORM_LIBS += -lrt # Support generic board on sandbox __HAVE_ARCH_GENERIC_BOARD := y + +cmd_u-boot__ = $(CC) -o $@ -T u-boot.lds \ + -Wl,--start-group $(u-boot-main) -Wl,--end-group \ + $(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map diff --git a/arch/sandbox/cpu/Makefile b/arch/sandbox/cpu/Makefile index b564294..63deded 100644 --- a/arch/sandbox/cpu/Makefile +++ b/arch/sandbox/cpu/Makefile @@ -10,7 +10,10 @@ obj-y := cpu.o os.o start.o state.o # os.c is build in the system environment, so needs standard includes -$(obj)os.o: CFLAGS := $(filter-out -nostdinc,\ - $(patsubst -I%,-idirafter%,$(CFLAGS))) -$(obj).depend.os: CPPFLAGS := $(filter-out -nostdinc,\ - $(patsubst -I%,-idirafter%,$(CPPFLAGS))) +# CFLAGS_REMOVE_os.o cannot be used to drop header include path +quiet_cmd_cc_os.o = CC $(quiet_modtag) $@ +cmd_cc_os.o = $(CC) $(filter-out -nostdinc, \ + $(patsubst -I%,-idirafter%,$(c_flags))) -c -o $@ $< + +$(obj)/os.o: $(src)/os.c FORCE + $(call if_changed_dep,cc_os.o) diff --git a/arch/sparc/config.mk b/arch/sparc/config.mk index e94e7cb..9bb3724 100644 --- a/arch/sparc/config.mk +++ b/arch/sparc/config.mk @@ -7,6 +7,7 @@ CROSS_COMPILE ?= sparc-elf- -CONFIG_STANDALONE_LOAD_ADDR ?= 0x00000000 -L $(gcclibdir) -T sparc.lds +CONFIG_STANDALONE_LOAD_ADDR ?= 0x00000000 -L $(gcclibdir) \ + -T $(srctree)/$(src)/sparc.lds PLATFORM_CPPFLAGS += -DCONFIG_SPARC -D__sparc__ diff --git a/arch/x86/dts/.gitignore b/arch/x86/dts/.gitignore new file mode 100644 index 0000000..b60ed20 --- /dev/null +++ b/arch/x86/dts/.gitignore @@ -0,0 +1 @@ +*.dtb diff --git a/arch/x86/dts/Makefile b/arch/x86/dts/Makefile new file mode 100644 index 0000000..48265ef --- /dev/null +++ b/arch/x86/dts/Makefile @@ -0,0 +1,12 @@ +dtb-y += link.dtb \ + alex.dtb + +targets += $(dtb-y) + +DTC_FLAGS += -R 4 -p 0x1000 + +PHONY += dtbs +dtbs: $(addprefix $(obj)/, $(dtb-y)) + @: + +clean-files := *.dtb diff --git a/arch/x86/dts/alex.dts b/arch/x86/dts/alex.dts new file mode 100644 index 0000000..2f13544 --- /dev/null +++ b/arch/x86/dts/alex.dts @@ -0,0 +1,24 @@ +/dts-v1/; + +/include/ "coreboot.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "Google Alex"; + compatible = "google,alex", "intel,atom-pineview"; + + config { + silent_console = <0>; + }; + + gpio: gpio {}; + + serial { + reg = <0x3f8 8>; + clock-frequency = <115200>; + }; + + chosen { }; + memory { device_type = "memory"; reg = <0 0>; }; +}; diff --git a/arch/x86/dts/link.dts b/arch/x86/dts/link.dts new file mode 100644 index 0000000..4a37dac --- /dev/null +++ b/arch/x86/dts/link.dts @@ -0,0 +1,35 @@ +/dts-v1/; + +/include/ "coreboot.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "Google Link"; + compatible = "google,link", "intel,celeron-ivybridge"; + + config { + silent_console = <0>; + }; + + gpio: gpio {}; + + serial { + reg = <0x3f8 8>; + clock-frequency = <115200>; + }; + + chosen { }; + memory { device_type = "memory"; reg = <0 0>; }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ich9"; + spi-flash@0 { + reg = <0>; + compatible = "winbond,w25q64", "spi-flash"; + memory-map = <0xff800000 0x00800000>; + }; + }; +}; diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index 638f790..a35d062 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -23,5 +23,5 @@ obj-$(CONFIG_CMD_ZBOOT) += zimage.o LIBGCC := $(notdir $(NORMAL_LIBGCC)) extra-y := $(LIBGCC) -$(obj)$(LIBGCC): $(NORMAL_LIBGCC) +$(obj)/$(LIBGCC): $(NORMAL_LIBGCC) $(OBJCOPY) $< $@ --prefix-symbols=__normal_ diff --git a/arch/x86/lib/init_helpers.c b/arch/x86/lib/init_helpers.c index 582c0ff..b5d937f 100644 --- a/arch/x86/lib/init_helpers.c +++ b/arch/x86/lib/init_helpers.c @@ -92,7 +92,7 @@ int find_fdt(void) { #ifdef CONFIG_OF_EMBED /* Get a pointer to the FDT */ - gd->fdt_blob = _binary_dt_dtb_start; + gd->fdt_blob = __dtb_dt_begin; #elif defined CONFIG_OF_SEPARATE /* FDT is at end of image */ gd->fdt_blob = (ulong *)&_end; |