diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/cpu/armv7/sunxi/board.c | 8 | ||||
| -rw-r--r-- | arch/arm/dts/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/dts/sun8i-a33-q8-tablet.dts | 65 | ||||
| -rw-r--r-- | arch/arm/dts/sun8i-q8-common.dtsi | 84 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-sunxi/spl.h | 54 |
5 files changed, 194 insertions, 18 deletions
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index b40198b..d11365b 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -21,6 +21,7 @@ #include <asm/io.h> #include <asm/arch/clock.h> #include <asm/arch/gpio.h> +#include <asm/arch/spl.h> #include <asm/arch/sys_proto.h> #include <asm/arch/timer.h> #include <asm/arch/tzpc.h> @@ -152,7 +153,7 @@ u32 spl_boot_device(void) * binary over USB. If it is found, it determines where SPL was * read from. */ - if (readl(4) != 0x4E4F4765 || readl(8) != 0x3054422E) /* eGON.BT0 */ + if (!is_boot0_magic(SPL_ADDR + 4)) /* eGON.BT0 */ return BOOT_DEVICE_BOARD; /* The BROM will try to boot from mmc0 first, so try that first. */ @@ -198,11 +199,6 @@ void board_init_f(ulong dummy) i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); #endif sunxi_board_init(); - - /* Clear the BSS. */ - memset(__bss_start, 0, __bss_end - __bss_start); - - board_init_r(NULL, 0); } #endif diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 5f10243..6a11b12 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -158,6 +158,7 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \ sun8i-a33-et-q8-v1.6.dtb \ sun8i-a33-ga10h-v1.1.dtb \ sun8i-a33-ippo-q8h-v1.2.dtb \ + sun8i-a33-q8-tablet.dtb \ sun8i-a33-sinlinx-sina33.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ diff --git a/arch/arm/dts/sun8i-a33-q8-tablet.dts b/arch/arm/dts/sun8i-a33-q8-tablet.dts new file mode 100644 index 0000000..44b3229 --- /dev/null +++ b/arch/arm/dts/sun8i-a33-q8-tablet.dts @@ -0,0 +1,65 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a33.dtsi" +#include "sun8i-q8-common.dtsi" + +/ { + model = "Q8 A33 Tablet"; + compatible = "allwinner,q8-a33", "allwinner,sun8i-a33"; +}; + +/* + * FIXME for now we only support host mode and rely on u-boot to have + * turned on Vbus which is controlled by the axp223 pmic on the board. + * + * Once we have axp223 support we should switch to fully supporting otg. + */ +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-q8-common.dtsi b/arch/arm/dts/sun8i-q8-common.dtsi new file mode 100644 index 0000000..07cd268 --- /dev/null +++ b/arch/arm/dts/sun8i-q8-common.dtsi @@ -0,0 +1,84 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include "sunxi-q8-common.dtsi" + +/ { + aliases { + serial0 = &r_uart; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&pio { + bl_en_pin_q8: bl_en_pin@0 { + allwinner,pins = "PH6"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_q8: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&r_uart { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/include/asm/arch-sunxi/spl.h b/arch/arm/include/asm/arch-sunxi/spl.h index acbec46..a129dd4 100644 --- a/arch/arm/include/asm/arch-sunxi/spl.h +++ b/arch/arm/include/asm/arch-sunxi/spl.h @@ -1,20 +1,50 @@ /* - * This is a copy of omap3/spl.h: - * - * (C) Copyright 2012 - * Texas Instruments, <www.ti.com> + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> * * SPDX-License-Identifier: GPL-2.0+ */ #ifndef _ASM_ARCH_SPL_H_ #define _ASM_ARCH_SPL_H_ -#define BOOT_DEVICE_NONE 0 -#define BOOT_DEVICE_XIP 1 -#define BOOT_DEVICE_NAND 2 -#define BOOT_DEVICE_ONE_NAND 3 -#define BOOT_DEVICE_MMC2 5 /*emmc*/ -#define BOOT_DEVICE_MMC1 6 -#define BOOT_DEVICE_XIPWAIT 7 -#define BOOT_DEVICE_MMC2_2 0xff +#define BOOT0_MAGIC "eGON.BT0" +#define SPL_SIGNATURE "SPL" /* marks "sunxi" SPL header */ +#define SPL_HEADER_VERSION 1 + +/* Note: A80 will require special handling here: SPL_ADDR 0x10000 */ +#define SPL_ADDR 0x0 + +/* boot head definition from sun4i boot code */ +struct boot_file_head { + uint32_t b_instruction; /* one intruction jumping to real code */ + uint8_t magic[8]; /* ="eGON.BT0" or "eGON.BT1", not C-style str */ + uint32_t check_sum; /* generated by PC */ + uint32_t length; /* generated by PC */ + /* + * We use a simplified header, only filling in what is needed + * by the boot ROM. To be compatible with Allwinner tools we + * would need to implement the proper fields here instead of + * padding. + * + * Actually we want the ability to recognize our "sunxi" variant + * of the SPL. To do so, let's place a special signature into the + * "pub_head_size" field. We can reasonably expect Allwinner's + * boot0 to always have the upper 16 bits of this set to 0 (after + * all the value shouldn't be larger than the limit imposed by + * SRAM size). + * If the signature is present (at 0x14), then we know it's safe + * to use the remaining 8 bytes (at 0x18) for our own purposes. + * (E.g. sunxi-tools "fel" utility can pass information there.) + */ + union { + uint32_t pub_head_size; + uint8_t spl_signature[4]; + }; + uint32_t fel_script_address; + uint32_t reserved; /* padding, align to 32 bytes */ +}; + +#define is_boot0_magic(addr) (memcmp((void *)addr, BOOT0_MAGIC, 8) == 0) + #endif |