diff options
Diffstat (limited to 'arch')
45 files changed, 2716 insertions, 2136 deletions
diff --git a/arch/arm/config.mk b/arch/arm/config.mk index 6923f6d..21c1e33 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -33,11 +33,6 @@ STANDALONE_LOAD_ADDR = 0xc100000 endif endif -ifndef CONFIG_SYS_ARM_WITHOUT_RELOC -# needed for relocation -PLATFORM_RELFLAGS += -fPIC -endif - ifdef CONFIG_SYS_ARM_WITHOUT_RELOC PLATFORM_CPPFLAGS += -DCONFIG_SYS_ARM_WITHOUT_RELOC endif @@ -72,3 +67,10 @@ PLATFORM_LIBS += $(OBJTREE)/arch/arm/lib/eabi_compat.o endif endif LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds + +ifndef CONFIG_SYS_ARM_WITHOUT_RELOC +# needed for relocation +ifndef CONFIG_NAND_SPL +PLATFORM_LDFLAGS += -pie +endif +endif diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index 5008ac6..29ed065 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -89,48 +89,35 @@ _end_vect: _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. + * Subtracting _start from them lets the linker put their + * relative position in the executable instead of leaving + * them null. */ -.globl _bss_start -_bss_start: - .word __bss_start - -.globl _bss_end -_bss_end: - .word _end - -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _datarel_start -_datarel_start: - .word __datarel_start +.globl _bss_start_ofs +_bss_start_ofs: + .word __bss_start - _start -.globl _datarelrolocal_start -_datarelrolocal_start: - .word __datarelrolocal_start +.globl _bss_end_ofs +_bss_end_ofs: + .word _end - _start -.globl _datarellocal_start -_datarellocal_start: - .word __datarellocal_start +.globl _datarel_start_ofs +_datarel_start_ofs: + .word __datarel_start - _start -.globl _datarelro_start -_datarelro_start: - .word __datarelro_start +.globl _datarelrolocal_start_ofs +_datarelrolocal_start_ofs: + .word __datarelrolocal_start - _start -.globl _got_start -_got_start: - .word __got_start +.globl _datarellocal_start_ofs +_datarellocal_start_ofs: + .word __datarellocal_start - _start -.globl _got_end -_got_end: - .word __got_end -#endif +.globl _datarelro_start_ofs +_datarelro_start_ofs: + .word __datarelro_start - _start #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ @@ -225,9 +212,8 @@ stack_setup: adr r0, _start ldr r2, _TEXT_BASE - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ + ldr r3, _bss_start_ofs + add r2, r0, r3 /* r2 <- source end address */ cmp r0, r6 beq clear_bss @@ -239,36 +225,54 @@ copy_loop: blo copy_loop #ifndef CONFIG_PRELOADER - /* fix got entries */ - ldr r1, _TEXT_BASE - mov r0, r7 /* reloc addr */ - ldr r2, _got_start /* addr in Flash */ - ldr r3, _got_end /* addr in Flash */ - sub r3, r3, r1 - add r3, r3, r0 - sub r2, r2, r1 - add r2, r2, r0 - + /* + * fix .rel.dyn relocations + */ + ldr r0, _TEXT_BASE /* r0 <- Text base */ + sub r9, r7, r0 /* r9 <- relocation offset */ + ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ + add r10, r10, r0 /* r10 <- sym table in FLASH */ + ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ + add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ + ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ + add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ fixloop: - ldr r4, [r2] - sub r4, r4, r1 - add r4, r4, r0 - str r4, [r2] - add r2, r2, #4 + ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ + add r0, r9 /* r0 <- location to fix up in RAM */ + ldr r1, [r2, #4] + and r8, r1, #0xff + cmp r8, #23 /* relative fixup? */ + beq fixrel + cmp r8, #2 /* absolute fixup? */ + beq fixabs + /* ignore unknown type of fixup */ + b fixnext +fixabs: + /* absolute fix: set location to (offset) symbol value */ + mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ + add r1, r10, r1 /* r1 <- address of symbol in table */ + ldr r1, [r1, #4] /* r1 <- symbol value */ + add r1, r9 /* r1 <- relocated sym addr */ + b fixnext +fixrel: + /* relative fix: increase location by offset */ + ldr r1, [r0] + add r1, r1, r9 +fixnext: + str r1, [r0] + add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 - bne fixloop + ble fixloop #endif #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER - ldr r0, _bss_start - ldr r1, _bss_end + ldr r0, _bss_start_ofs + ldr r1, _bss_end_ofs ldr r3, _TEXT_BASE /* Text base */ mov r4, r7 /* reloc addr */ - sub r0, r0, r3 add r0, r0, r4 - sub r1, r1, r3 add r1, r1, r4 mov r2, #0x00000000 /* clear */ @@ -283,24 +287,34 @@ clbss_l:str r2, [r0] /* clear loop... */ * initialization, now running from RAM. */ #ifdef CONFIG_NAND_SPL - ldr pc, _nand_boot - -_nand_boot: .word nand_boot + ldr r0, _nand_boot_ofs + adr r1, _start + add pc, r0, r1 +_nand_boot_ofs + : .word nand_boot - _start #else jump_2_ram: - ldr r0, _TEXT_BASE - ldr r2, _board_init_r - sub r2, r2, r0 - add r2, r2, r7 /* position from board_init_r in RAM */ + ldr r0, _board_init_r_ofs + adr r1, _start + add r0, r0, r1 + add lr, r0, r9 /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ /* jump to it ... */ - mov lr, r2 mov pc, lr -_board_init_r: .word board_init_r +_board_init_r_ofs: + .word board_init_r - _start #endif + +_rel_dyn_start_ofs: + .word __rel_dyn_start - _start +_rel_dyn_end_ofs: + .word __rel_dyn_end - _start +_dynsym_start_ofs: + .word __dynsym_start - _start + #else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ /* * the actual reset code @@ -375,8 +389,11 @@ stack_setup: bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ + adr r2, _start + ldr r0, _bss_start_ofs /* find start of bss segment */ + add r0, r0, r2 + ldr r1, _bss_end_ofs /* stop here */ + add r1, r1, r2 mov r2, #0x00000000 /* clear */ #ifndef CONFIG_PRELOADER @@ -386,15 +403,19 @@ clbss_l:str r2, [r0] /* clear loop... */ bne clbss_l #endif - ldr pc, _start_armboot + ldr r0, _start_armboot_ofs + adr r1, _start + add r0, r0, r1 + ldr pc, r0 +_start_armboot_ofs: #ifdef CONFIG_NAND_SPL -_start_armboot: .word nand_boot + .word nand_boot - _start #else #ifdef CONFIG_ONENAND_IPL -_start_armboot: .word start_oneboot + .word start_oneboot - _start #else -_start_armboot: .word start_armboot + .word start_armboot - _start #endif /* CONFIG_ONENAND_IPL */ #endif /* CONFIG_NAND_SPL */ @@ -487,7 +508,7 @@ cpu_init_crit: #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r2, IRQ_STACK_START_IN @ set base 2 words into abort stack #else - ldr r2, _armboot_start + adr r2, _start sub r2, r2, #(CONFIG_SYS_MALLOC_LEN) sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack #endif @@ -524,8 +545,8 @@ cpu_init_crit: #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r13, IRQ_STACK_START_IN @ setup our mode stack (enter in banked mode) #else - ldr r13, _armboot_start @ setup our mode stack (enter in banked mode) - sub r13, r13, #(CONFIG_SYS_MALLOC_LEN) @ move past malloc pool + adr r13, _start @ setup our mode stack (enter in banked mode) + sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) @ move past malloc pool sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ move to reserved a couple spots for abort stack #endif diff --git a/arch/arm/cpu/arm1136/u-boot.lds b/arch/arm/cpu/arm1136/u-boot.lds index 1db4b49..31f43f0 100644 --- a/arch/arm/cpu/arm1136/u-boot.lds +++ b/arch/arm/cpu/arm1136/u-boot.lds @@ -59,11 +59,14 @@ SECTIONS *(.data.rel.ro) } - __got_start = .; . = ALIGN(4); - .got : { *(.got) } + __rel_dyn_start = .; + .rel.dyn : { *(.rel.dyn) } + __rel_dyn_end = .; + + __dynsym_start = .; + .dynsym : { *(.dynsym) } - __got_end = .; . = .; __u_boot_cmd_start = .; .u_boot_cmd : { *(.u_boot_cmd) } @@ -73,4 +76,10 @@ SECTIONS __bss_start = .; .bss (NOLOAD) : { *(.bss) . = ALIGN(4); } _end = .; + + /DISCARD/ : { *(.dynstr*) } + /DISCARD/ : { *(.dynamic*) } + /DISCARD/ : { *(.plt*) } + /DISCARD/ : { *(.interp*) } + /DISCARD/ : { *(.gnu*) } } diff --git a/arch/arm/cpu/arm926ejs/at91/clock.c b/arch/arm/cpu/arm926ejs/at91/clock.c index ecf91f5..7a10a77 100644 --- a/arch/arm/cpu/arm926ejs/at91/clock.c +++ b/arch/arm/cpu/arm926ejs/at91/clock.c @@ -11,47 +11,46 @@ * (at your option) any later version. */ -#include <config.h> +#include <common.h> #include <asm/arch/hardware.h> #include <asm/arch/io.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/clk.h> -static unsigned long cpu_clk_rate_hz; -static unsigned long main_clk_rate_hz; -static unsigned long mck_rate_hz; -static unsigned long plla_rate_hz; -static unsigned long pllb_rate_hz; -static u32 at91_pllb_usb_init; +#if !defined(CONFIG_AT91FAMILY) +# error You need to define CONFIG_AT91FAMILY in your board config! +#endif + +DECLARE_GLOBAL_DATA_PTR; unsigned long get_cpu_clk_rate(void) { - return cpu_clk_rate_hz; + return gd->cpu_clk_rate_hz; } unsigned long get_main_clk_rate(void) { - return main_clk_rate_hz; + return gd->main_clk_rate_hz; } unsigned long get_mck_clk_rate(void) { - return mck_rate_hz; + return gd->mck_rate_hz; } unsigned long get_plla_clk_rate(void) { - return plla_rate_hz; + return gd->plla_rate_hz; } unsigned long get_pllb_clk_rate(void) { - return pllb_rate_hz; + return gd->pllb_rate_hz; } u32 get_pllb_init(void) { - return at91_pllb_usb_init; + return gd->at91_pllb_usb_init; } static unsigned long at91_css_to_rate(unsigned long css) @@ -60,11 +59,11 @@ static unsigned long at91_css_to_rate(unsigned long css) case AT91_PMC_MCKR_CSS_SLOW: return AT91_SLOW_CLOCK; case AT91_PMC_MCKR_CSS_MAIN: - return main_clk_rate_hz; + return gd->main_clk_rate_hz; case AT91_PMC_MCKR_CSS_PLLA: - return plla_rate_hz; + return gd->plla_rate_hz; case AT91_PMC_MCKR_CSS_PLLB: - return pllb_rate_hz; + return gd->pllb_rate_hz; } return 0; @@ -163,10 +162,10 @@ int at91_clock_init(unsigned long main_clock) main_clock = tmp * (AT91_SLOW_CLOCK / 16); } #endif - main_clk_rate_hz = main_clock; + gd->main_clk_rate_hz = main_clock; /* report if PLLA is more than mildly overclocked */ - plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar)); + gd->plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar)); #ifdef CONFIG_USB_ATMEL /* @@ -175,9 +174,9 @@ int at91_clock_init(unsigned long main_clock) * * REVISIT: assumes MCK doesn't derive from PLLB! */ - at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | + gd->at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_PLLBR_USBDIV_2; - pllb_rate_hz = at91_pll_rate(main_clock, at91_pllb_usb_init); + gd->pllb_rate_hz = at91_pll_rate(main_clock, gd->at91_pllb_usb_init); #endif /* @@ -187,30 +186,30 @@ int at91_clock_init(unsigned long main_clock) mckr = readl(&pmc->mckr); #if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) /* plla divisor by 2 */ - plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12)); + gd->plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12)); #endif - mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK); - freq = mck_rate_hz; + gd->mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK); + freq = gd->mck_rate_hz; freq /= (1 << ((mckr & AT91_PMC_MCKR_PRES_MASK) >> 2)); /* prescale */ #if defined(CONFIG_AT91RM9200) /* mdiv */ - mck_rate_hz = freq / (1 + ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8)); + gd->mck_rate_hz = freq / (1 + ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8)); #elif defined(CONFIG_AT91SAM9G20) /* mdiv ; (x >> 7) = ((x >> 8) * 2) */ - mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ? + gd->mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ? freq / ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 7) : freq; if (mckr & AT91_PMC_MCKR_MDIV_MASK) freq /= 2; /* processor clock division */ #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) - mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) == + gd->mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) == (AT91_PMC_MCKR_MDIV_2 | AT91_PMC_MCKR_MDIV_4) ? freq / 3 : freq / (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8)); #else - mck_rate_hz = freq / (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8)); + gd->mck_rate_hz = freq / (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8)); #endif - cpu_clk_rate_hz = freq; + gd->cpu_clk_rate_hz = freq; return 0; } diff --git a/arch/arm/cpu/arm926ejs/at91/timer.c b/arch/arm/cpu/arm926ejs/at91/timer.c index 8efc34b..82b8d7e 100644 --- a/arch/arm/cpu/arm926ejs/at91/timer.c +++ b/arch/arm/cpu/arm926ejs/at91/timer.c @@ -30,55 +30,63 @@ #include <asm/arch/io.h> #include <div64.h> +#if !defined(CONFIG_AT91FAMILY) +# error You need to define CONFIG_AT91FAMILY in your board config! +#endif + +DECLARE_GLOBAL_DATA_PTR; + /* * We're using the AT91CAP9/SAM9 PITC in 32 bit mode, by * setting the 20 bit counter period to its maximum (0xfffff). + * (See the relevant data sheets to understand that this really works) + * + * We do also mimic the typical powerpc way of incrementing + * two 32 bit registers called tbl and tbu. + * + * Those registers increment at 1/16 the main clock rate. */ -#define TIMER_LOAD_VAL 0xfffff -static ulong timestamp; -static ulong lastinc; -static ulong timer_freq; +#define TIMER_LOAD_VAL 0xfffff static inline unsigned long long tick_to_time(unsigned long long tick) { tick *= CONFIG_SYS_HZ; - do_div(tick, timer_freq); + do_div(tick, gd->timer_rate_hz); return tick; } static inline unsigned long long usec_to_tick(unsigned long long usec) { - usec *= timer_freq; + usec *= gd->timer_rate_hz; do_div(usec, 1000000); return usec; } -/* nothing really to do with interrupts, just starts up a counter. */ +/* + * Use the PITC in full 32 bit incrementing mode + */ int timer_init(void) { at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; at91_pit_t *pit = (at91_pit_t *) AT91_PIT_BASE; - /* - * Enable PITC Clock - * The clock is already enabled for system controller in boot - */ + + /* Enable PITC Clock */ writel(1 << AT91_ID_SYS, &pmc->pcer); /* Enable PITC */ writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr); - reset_timer_masked(); - - timer_freq = get_mck_clk_rate() >> 4; + gd->timer_rate_hz = gd->mck_rate_hz / 16; + gd->tbu = gd->tbl = 0; return 0; } /* - * timer without interrupts + * Get the current 64 bit timer tick count */ unsigned long long get_ticks(void) { @@ -86,28 +94,11 @@ unsigned long long get_ticks(void) ulong now = readl(&pit->piir); - if (now >= lastinc) /* normal mode (non roll) */ - /* move stamp forward with absolut diff ticks */ - timestamp += (now - lastinc); - else /* we have rollover of incrementer */ - timestamp += (0xFFFFFFFF - lastinc) + now; - lastinc = now; - return timestamp; -} - -void reset_timer_masked(void) -{ - /* reset time */ - at91_pit_t *pit = (at91_pit_t *) AT91_PIT_BASE; - - /* capture current incrementer value time */ - lastinc = readl(&pit->piir); - timestamp = 0; /* start "advancing" time stamp from 0 */ -} - -ulong get_timer_masked(void) -{ - return tick_to_time(get_ticks()); + /* increment tbu if tbl has rolled over */ + if (now < gd->tbl) + gd->tbu++; + gd->tbl = now; + return (((unsigned long long)gd->tbu) << 32) | gd->tbl; } void __udelay(unsigned long usec) @@ -119,24 +110,32 @@ void __udelay(unsigned long usec) tmp = get_ticks() + tmo; /* get current timestamp */ while (get_ticks() < tmp) /* loop till event */ - /*NOP*/; + ; } +/* + * reset_timer() and get_timer(base) are a pair of functions that are used by + * some timeout/sleep mechanisms in u-boot. + * + * reset_timer() marks the current time as epoch and + * get_timer(base) works relative to that epoch. + * + * The time is used in CONFIG_SYS_HZ units! + */ void reset_timer(void) { - reset_timer_masked(); + gd->timer_reset_value = get_ticks(); } ulong get_timer(ulong base) { - return get_timer_masked () - base; + return tick_to_time(get_ticks() - gd->timer_reset_value) - base; } /* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. + * Return the number of timer ticks per second. */ ulong get_tbclk(void) { - return timer_freq; + return gd->timer_rate_hz; } diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 8cbe3e7..863de3b 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -10,6 +10,7 @@ * Copyright (c) 2002 Gary Jennejohn <garyj@denx.de> * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com> * Copyright (c) 2003 Kshitij <kshitij@ti.com> + * Copyright (c) 2010 Albert Aribaud <albert.aribaud@free.fr> * * See file CREDITS for list of people who contributed to this * project. @@ -118,22 +119,19 @@ _fiq: _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. + * Subtracting _start from them lets the linker put their + * relative position in the executable instead of leaving + * them null. */ -.globl _bss_start -_bss_start: - .word __bss_start +.globl _bss_start_ofs +_bss_start_ofs: + .word __bss_start - _start -.globl _bss_end -_bss_end: - .word _end +.globl _bss_end_ofs +_bss_end_ofs: + .word _end - _start #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ @@ -153,30 +151,6 @@ FIQ_STACK_START: IRQ_STACK_START_IN: .word 0x0badc0de -.globl _datarel_start -_datarel_start: - .word __datarel_start - -.globl _datarelrolocal_start -_datarelrolocal_start: - .word __datarelrolocal_start - -.globl _datarellocal_start -_datarellocal_start: - .word __datarellocal_start - -.globl _datarelro_start -_datarelro_start: - .word __datarelro_start - -.globl _got_start -_got_start: - .word __got_start - -.globl _got_end -_got_end: - .word __got_end - /* * the actual reset code */ @@ -226,9 +200,8 @@ stack_setup: adr r0, _start ldr r2, _TEXT_BASE - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ + ldr r3, _bss_start_ofs + add r2, r0, r3 /* r2 <- source end address */ cmp r0, r6 beq clear_bss @@ -240,36 +213,54 @@ copy_loop: blo copy_loop #ifndef CONFIG_PRELOADER - /* fix got entries */ - ldr r1, _TEXT_BASE /* Text base */ - mov r0, r7 /* reloc addr */ - ldr r2, _got_start /* addr in Flash */ - ldr r3, _got_end /* addr in Flash */ - sub r3, r3, r1 - add r3, r3, r0 - sub r2, r2, r1 - add r2, r2, r0 - + /* + * fix .rel.dyn relocations + */ + ldr r0, _TEXT_BASE /* r0 <- Text base */ + sub r9, r7, r0 /* r9 <- relocation offset */ + ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ + add r10, r10, r0 /* r10 <- sym table in FLASH */ + ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ + add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ + ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ + add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ fixloop: - ldr r4, [r2] - sub r4, r4, r1 - add r4, r4, r0 - str r4, [r2] - add r2, r2, #4 + ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ + add r0, r9 /* r0 <- location to fix up in RAM */ + ldr r1, [r2, #4] + and r8, r1, #0xff + cmp r8, #23 /* relative fixup? */ + beq fixrel + cmp r8, #2 /* absolute fixup? */ + beq fixabs + /* ignore unknown type of fixup */ + b fixnext +fixabs: + /* absolute fix: set location to (offset) symbol value */ + mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ + add r1, r10, r1 /* r1 <- address of symbol in table */ + ldr r1, [r1, #4] /* r1 <- symbol value */ + add r1, r9 /* r1 <- relocated sym addr */ + b fixnext +fixrel: + /* relative fix: increase location by offset */ + ldr r1, [r0] + add r1, r1, r9 +fixnext: + str r1, [r0] + add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 - bne fixloop + blo fixloop #endif #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER - ldr r0, _bss_start - ldr r1, _bss_end + ldr r0, _bss_start_ofs + ldr r1, _bss_end_ofs ldr r3, _TEXT_BASE /* Text base */ mov r4, r7 /* reloc addr */ - sub r0, r0, r3 add r0, r0, r4 - sub r1, r1, r3 add r1, r1, r4 mov r2, #0x00000000 /* clear */ @@ -287,24 +278,33 @@ clbss_l:str r2, [r0] /* clear loop... */ * initialization, now running from RAM. */ #ifdef CONFIG_NAND_SPL - ldr pc, _nand_boot + ldr r0, _nand_boot_ofs + mov pc, r0 -_nand_boot: .word nand_boot +_nand_boot_ofs: + .word nand_boot #else - ldr r0, _TEXT_BASE - ldr r2, _board_init_r - sub r2, r2, r0 - add r2, r2, r7 /* position from board_init_r in RAM */ + ldr r0, _board_init_r_ofs + adr r1, _start + add r0, r0, r1 + add lr, r0, r9 /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ /* jump to it ... */ - mov lr, r2 mov pc, lr -_board_init_r: .word board_init_r +_board_init_r_ofs: + .word board_init_r - _start #endif +_rel_dyn_start_ofs: + .word __rel_dyn_start - _start +_rel_dyn_end_ofs: + .word __rel_dyn_end - _start +_dynsym_start_ofs: + .word __dynsym_start - _start + #else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ /* * the actual reset code @@ -333,10 +333,8 @@ relocate: /* relocate U-Boot to RAM */ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ cmp r0, r1 /* don't reloc during debug */ beq stack_setup - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ + ldr r3, _bss_start_ofs /* r3 <- _bss_start - _start */ + add r2, r0, r3 /* r2 <- source end address */ copy_loop: ldmia r0!, {r3-r10} /* copy from source address [r0] */ @@ -360,8 +358,11 @@ stack_setup: bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ + adr r2, _start + ldr r0, _bss_start_ofs /* find start of bss segment */ + add r0, r0, r2 + ldr r1, _bss_end_ofs /* stop here */ + add r1, r1, r2 mov r2, #0x00000000 /* clear */ #ifndef CONFIG_PRELOADER @@ -374,13 +375,16 @@ clbss_l:str r2, [r0] /* clear loop... */ bl red_LED_on #endif /* CONFIG_PRELOADER */ - ldr pc, _start_armboot + ldr r0, _start_armboot_ofs + adr r1, _start + add r0, r0, r1 + ldr pc, r0 -_start_armboot: +_start_armboot_ofs: #ifdef CONFIG_NAND_SPL - .word nand_boot + .word nand_boot - _start #else - .word start_armboot + .word start_armboot - _start #endif /* CONFIG_NAND_SPL */ #endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ @@ -469,7 +473,7 @@ cpu_init_crit: sub sp, sp, #S_FRAME_SIZE stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start + adr r2, _start sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack #else @@ -507,7 +511,7 @@ cpu_init_crit: .macro get_bad_stack #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack + adr r13, _start @ setup our mode stack sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack #else diff --git a/arch/arm/cpu/arm926ejs/u-boot.lds b/arch/arm/cpu/arm926ejs/u-boot.lds index 02eb8ca..72f45f8 100644 --- a/arch/arm/cpu/arm926ejs/u-boot.lds +++ b/arch/arm/cpu/arm926ejs/u-boot.lds @@ -41,21 +41,19 @@ SECTIONS . = ALIGN(4); .data : { *(.data) - __datarel_start = .; - *(.data.rel) - __datarelrolocal_start = .; - *(.data.rel.ro.local) - __datarellocal_start = .; - *(.data.rel.local) - __datarelro_start = .; - *(.data.rel.ro) } - __got_start = .; . = ALIGN(4); - .got : { *(.got) } - __got_end = .; + __rel_dyn_start = .; + .rel.dyn : { *(.rel.dyn) } + __rel_dyn_end = .; + + __dynsym_start = .; + .dynsym : { *(.dynsym) } + + . = ALIGN(4); + . = .; __u_boot_cmd_start = .; .u_boot_cmd : { *(.u_boot_cmd) } @@ -65,4 +63,10 @@ SECTIONS __bss_start = .; .bss (NOLOAD) : { *(.bss) . = ALIGN(4); } _end = .; + + /DISCARD/ : { *(.dynstr*) } + /DISCARD/ : { *(.dynamic*) } + /DISCARD/ : { *(.plt*) } + /DISCARD/ : { *(.interp*) } + /DISCARD/ : { *(.gnu*) } } diff --git a/arch/arm/cpu/armv7/mx51/Makefile b/arch/arm/cpu/armv7/mx5/Makefile index 7cfaa2c..7cfaa2c 100644 --- a/arch/arm/cpu/armv7/mx51/Makefile +++ b/arch/arm/cpu/armv7/mx5/Makefile diff --git a/arch/arm/cpu/armv7/mx51/clock.c b/arch/arm/cpu/armv7/mx5/clock.c index a27227d..00f649c 100644 --- a/arch/arm/cpu/armv7/mx51/clock.c +++ b/arch/arm/cpu/armv7/mx5/clock.c @@ -71,7 +71,7 @@ u32 get_mcu_main_clk(void) reg = (__raw_readl(&mxc_ccm->cacrr) & MXC_CCM_CACRR_ARM_PODF_MASK) >> MXC_CCM_CACRR_ARM_PODF_OFFSET; - freq = decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_MX51_HCLK_FREQ); + freq = decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_SYS_MX5_HCLK); return freq / (reg + 1); } @@ -84,14 +84,14 @@ static u32 get_periph_clk(void) reg = __raw_readl(&mxc_ccm->cbcdr); if (!(reg & MXC_CCM_CBCDR_PERIPH_CLK_SEL)) - return decode_pll(mxc_plls[PLL2_CLOCK], CONFIG_MX51_HCLK_FREQ); + return decode_pll(mxc_plls[PLL2_CLOCK], CONFIG_SYS_MX5_HCLK); reg = __raw_readl(&mxc_ccm->cbcmr); switch ((reg & MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK) >> MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET) { case 0: - return decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_MX51_HCLK_FREQ); + return decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_SYS_MX5_HCLK); case 1: - return decode_pll(mxc_plls[PLL3_CLOCK], CONFIG_MX51_HCLK_FREQ); + return decode_pll(mxc_plls[PLL3_CLOCK], CONFIG_SYS_MX5_HCLK); default: return 0; } @@ -146,15 +146,15 @@ static u32 get_uart_clk(void) MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET) { case 0x0: freq = decode_pll(mxc_plls[PLL1_CLOCK], - CONFIG_MX51_HCLK_FREQ); + CONFIG_SYS_MX5_HCLK); break; case 0x1: freq = decode_pll(mxc_plls[PLL2_CLOCK], - CONFIG_MX51_HCLK_FREQ); + CONFIG_SYS_MX5_HCLK); break; case 0x2: freq = decode_pll(mxc_plls[PLL3_CLOCK], - CONFIG_MX51_HCLK_FREQ); + CONFIG_SYS_MX5_HCLK); break; default: return 66500000; @@ -181,7 +181,7 @@ u32 get_lp_apm(void) u32 ccsr = __raw_readl(&mxc_ccm->ccsr); if (((ccsr >> 9) & 1) == 0) - ret_val = CONFIG_MX51_HCLK_FREQ; + ret_val = CONFIG_SYS_MX5_HCLK; else ret_val = ((32768 * 1024)); @@ -207,17 +207,17 @@ u32 imx_get_cspiclk(void) switch (clk_sel) { case 0: ret_val = decode_pll(mxc_plls[PLL1_CLOCK], - CONFIG_MX51_HCLK_FREQ) / + CONFIG_SYS_MX5_HCLK) / ((pre_pdf + 1) * (pdf + 1)); break; case 1: ret_val = decode_pll(mxc_plls[PLL2_CLOCK], - CONFIG_MX51_HCLK_FREQ) / + CONFIG_SYS_MX5_HCLK) / ((pre_pdf + 1) * (pdf + 1)); break; case 2: ret_val = decode_pll(mxc_plls[PLL3_CLOCK], - CONFIG_MX51_HCLK_FREQ) / + CONFIG_SYS_MX5_HCLK) / ((pre_pdf + 1) * (pdf + 1)); break; default: @@ -248,7 +248,7 @@ unsigned int mxc_get_clock(enum mxc_clock clk) return imx_get_cspiclk(); case MXC_FEC_CLK: return decode_pll(mxc_plls[PLL1_CLOCK], - CONFIG_MX51_HCLK_FREQ); + CONFIG_SYS_MX5_HCLK); default: break; } @@ -269,16 +269,16 @@ u32 imx_get_fecclk(void) /* * Dump some core clockes. */ -int do_mx51_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +int do_mx5_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { u32 freq; - freq = decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_MX51_HCLK_FREQ); - printf("mx51 pll1: %dMHz\n", freq / 1000000); - freq = decode_pll(mxc_plls[PLL2_CLOCK], CONFIG_MX51_HCLK_FREQ); - printf("mx51 pll2: %dMHz\n", freq / 1000000); - freq = decode_pll(mxc_plls[PLL3_CLOCK], CONFIG_MX51_HCLK_FREQ); - printf("mx51 pll3: %dMHz\n", freq / 1000000); + freq = decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_SYS_MX5_HCLK); + printf("pll1: %dMHz\n", freq / 1000000); + freq = decode_pll(mxc_plls[PLL2_CLOCK], CONFIG_SYS_MX5_HCLK); + printf("pll2: %dMHz\n", freq / 1000000); + freq = decode_pll(mxc_plls[PLL3_CLOCK], CONFIG_SYS_MX5_HCLK); + printf("pll3: %dMHz\n", freq / 1000000); printf("ipg clock : %dHz\n", mxc_get_clock(MXC_IPG_CLK)); printf("ipg per clock : %dHz\n", mxc_get_clock(MXC_IPG_PERCLK)); @@ -288,7 +288,7 @@ int do_mx51_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] /***************************************************/ U_BOOT_CMD( - clockinfo, CONFIG_SYS_MAXARGS, 1, do_mx51_showclocks, - "display mx51 clocks\n", + clockinfo, CONFIG_SYS_MAXARGS, 1, do_mx5_showclocks, + "display clocks\n", "" ); diff --git a/arch/arm/cpu/armv7/mx51/iomux.c b/arch/arm/cpu/armv7/mx5/iomux.c index 62b2954..e8928d5 100644 --- a/arch/arm/cpu/armv7/mx51/iomux.c +++ b/arch/arm/cpu/armv7/mx5/iomux.c @@ -23,7 +23,7 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/mx51_pins.h> +#include <asm/arch/mx5x_pins.h> #include <asm/arch/iomux.h> #include <asm/arch/sys_proto.h> diff --git a/arch/arm/cpu/armv7/mx51/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S index 783c81f..e984870 100644 --- a/arch/arm/cpu/armv7/mx51/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -257,20 +257,6 @@ lowlevel_init: orr r1, r1, #(1 << 23) str r1, [r0, #0x4] -#ifdef ENABLE_IMPRECISE_ABORT - mrs r1, spsr /* save old spsr */ - mrs r0, cpsr /* read out the cpsr */ - bic r0, r0, #0x100 /* clear the A bit */ - msr spsr, r0 /* update spsr */ - add lr, pc, #0x8 /* update lr */ - movs pc, lr /* update cpsr */ - nop - nop - nop - nop - msr spsr, r1 /* restore old spsr */ -#endif - init_l2cc init_aips diff --git a/arch/arm/cpu/armv7/mx51/soc.c b/arch/arm/cpu/armv7/mx5/soc.c index f22ebe9..7c7a565 100644 --- a/arch/arm/cpu/armv7/mx51/soc.c +++ b/arch/arm/cpu/armv7/mx5/soc.c @@ -33,28 +33,33 @@ #include <fsl_esdhc.h> #endif +#if defined(CONFIG_MX51) +#define CPU_TYPE 0x51000 +#else +#error "CPU_TYPE not defined" +#endif + u32 get_cpu_rev(void) { - int reg; - int system_rev; + int system_rev = CPU_TYPE; + int reg = __raw_readl(ROM_SI_REV); - reg = __raw_readl(ROM_SI_REV); switch (reg) { case 0x02: - system_rev = 0x51000 | CHIP_REV_1_1; + system_rev |= CHIP_REV_1_1; break; case 0x10: if ((__raw_readl(GPIO1_BASE_ADDR + 0x0) & (0x1 << 22)) == 0) - system_rev = 0x51000 | CHIP_REV_2_5; + system_rev |= CHIP_REV_2_5; else - system_rev = 0x51000 | CHIP_REV_2_0; + system_rev |= CHIP_REV_2_0; break; case 0x20: - system_rev = 0x51000 | CHIP_REV_3_0; + system_rev |= CHIP_REV_3_0; break; return system_rev; default: - system_rev = 0x51000 | CHIP_REV_1_0; + system_rev |= CHIP_REV_1_0; break; } return system_rev; @@ -67,9 +72,10 @@ int print_cpuinfo(void) u32 cpurev; cpurev = get_cpu_rev(); - printf("CPU: Freescale i.MX51 family rev%d.%d at %d MHz\n", - (cpurev & 0xF0) >> 4, - (cpurev & 0x0F) >> 4, + printf("CPU: Freescale i.MX%x family rev%d.%d at %d MHz\n", + (cpurev & 0xFF000) >> 12, + (cpurev & 0x000F0) >> 4, + (cpurev & 0x0000F) >> 0, mxc_get_clock(MXC_ARM_CLK) / 1000000); return 0; } diff --git a/arch/arm/cpu/armv7/mx51/speed.c b/arch/arm/cpu/armv7/mx5/speed.c index a444def..a444def 100644 --- a/arch/arm/cpu/armv7/mx51/speed.c +++ b/arch/arm/cpu/armv7/mx5/speed.c diff --git a/arch/arm/cpu/armv7/mx51/timer.c b/arch/arm/cpu/armv7/mx5/timer.c index 110edbf..3044fcf 100644 --- a/arch/arm/cpu/armv7/mx51/timer.c +++ b/arch/arm/cpu/armv7/mx5/timer.c @@ -75,18 +75,18 @@ void reset_timer(void) void reset_timer_masked(void) { ulong val = __raw_readl(&cur_gpt->counter); - lastinc = val / (CONFIG_MX51_CLK32 / CONFIG_SYS_HZ); + lastinc = val / (CONFIG_SYS_MX5_CLK32 / CONFIG_SYS_HZ); timestamp = 0; } ulong get_timer_masked(void) { ulong val = __raw_readl(&cur_gpt->counter); - val /= (CONFIG_MX51_CLK32 / CONFIG_SYS_HZ); + val /= (CONFIG_SYS_MX5_CLK32 / CONFIG_SYS_HZ); if (val >= lastinc) timestamp += (val - lastinc); else - timestamp += ((0xFFFFFFFF / (CONFIG_MX51_CLK32 / CONFIG_SYS_HZ)) + timestamp += ((0xFFFFFFFF / (CONFIG_SYS_MX5_CLK32 / CONFIG_SYS_HZ)) - lastinc) + val; lastinc = val; return timestamp; @@ -106,7 +106,7 @@ void set_timer(ulong t) void __udelay(unsigned long usec) { unsigned long now, start, tmo; - tmo = usec * (CONFIG_MX51_CLK32 / 1000) / 1000; + tmo = usec * (CONFIG_SYS_MX5_CLK32 / 1000) / 1000; if (!tmo) tmo = 1; diff --git a/arch/arm/cpu/armv7/mx51/u-boot.lds b/arch/arm/cpu/armv7/mx5/u-boot.lds index 55d6599..55d6599 100644 --- a/arch/arm/cpu/armv7/mx51/u-boot.lds +++ b/arch/arm/cpu/armv7/mx5/u-boot.lds diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 26f335a..64c86e9 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -78,13 +78,13 @@ _armboot_start: /* * These are defined in the board-specific linker script. */ -.globl _bss_start -_bss_start: - .word __bss_start +.globl _bss_start_ofs +_bss_start_ofs: + .word __bss_start - _start -.globl _bss_end -_bss_end: - .word _end +.globl _bss_end_ofs +_bss_end_ofs: + .word _end - _start #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ @@ -104,29 +104,29 @@ FIQ_STACK_START: IRQ_STACK_START_IN: .word 0x0badc0de -.globl _datarel_start -_datarel_start: - .word __datarel_start +.globl _datarel_start_ofs +_datarel_start_ofs: + .word __datarel_start - _start -.globl _datarelrolocal_start -_datarelrolocal_start: - .word __datarelrolocal_start +.globl _datarelrolocal_start_ofs +_datarelrolocal_start_ofs: + .word __datarelrolocal_start - _start -.globl _datarellocal_start -_datarellocal_start: - .word __datarellocal_start +.globl _datarellocal_start_ofs +_datarellocal_start_ofs: + .word __datarellocal_start - _start -.globl _datarelro_start -_datarelro_start: - .word __datarelro_start +.globl _datarelro_start_ofs +_datarelro_start_ofs: + .word __datarelro_start - _start -.globl _got_start -_got_start: - .word __got_start +.globl _got_start_ofs +_got_start_ofs: + .word __got_start - _start -.globl _got_end -_got_end: - .word __got_end +.globl _got_end_Ofs +_got_end_ofs: + .word __got_end - _start /* * the actual reset code @@ -198,9 +198,8 @@ stack_setup: #ifndef CONFIG_SKIP_RELOCATE_UBOOT adr r0, _start ldr r2, _TEXT_BASE - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ + ldr r3, _bss_start_ofs + add r2, r0, r3 /* r2 <- source end address */ cmp r0, r6 #ifndef CONFIG_PRELOADER beq jump_2_ram @@ -213,33 +212,51 @@ copy_loop: blo copy_loop #ifndef CONFIG_PRELOADER - /* fix got entries */ - ldr r1, _TEXT_BASE - mov r0, r7 /* reloc addr */ - ldr r2, _got_start /* addr in Flash */ - ldr r3, _got_end /* addr in Flash */ - sub r3, r3, r1 - add r3, r3, r0 - sub r2, r2, r1 - add r2, r2, r0 - + /* + * fix .rel.dyn relocations + */ + ldr r0, _TEXT_BASE /* r0 <- Text base */ + sub r9, r7, r0 /* r9 <- relocation offset */ + ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ + add r10, r10, r0 /* r10 <- sym table in FLASH */ + ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ + add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ + ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ + add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ fixloop: - ldr r4, [r2] - sub r4, r4, r1 - add r4, r4, r0 - str r4, [r2] - add r2, r2, #4 + ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ + add r0, r9 /* r0 <- location to fix up in RAM */ + ldr r1, [r2, #4] + and r8, r1, #0xff + cmp r8, #23 /* relative fixup? */ + beq fixrel + cmp r8, #2 /* absolute fixup? */ + beq fixabs + /* ignore unknown type of fixup */ + b fixnext +fixabs: + /* absolute fix: set location to (offset) symbol value */ + mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ + add r1, r10, r1 /* r1 <- address of symbol in table */ + ldr r1, [r1, #4] /* r1 <- symbol value */ + add r1, r9 /* r1 <- relocated sym addr */ + b fixnext +fixrel: + /* relative fix: increase location by offset */ + ldr r1, [r0] + add r1, r1, r9 +fixnext: + str r1, [r0] + add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 - bne fixloop + blo fixloop clear_bss: - ldr r0, _bss_start - ldr r1, _bss_end + ldr r0, _bss_start_ofs + ldr r1, _bss_end_ofs ldr r3, _TEXT_BASE /* Text base */ mov r4, r7 /* reloc addr */ - sub r0, r0, r3 add r0, r0, r4 - sub r1, r1, r3 add r1, r1, r4 mov r2, #0x00000000 /* clear */ @@ -255,18 +272,26 @@ clbss_l:str r2, [r0] /* clear loop... */ * initialization, now running from RAM. */ jump_2_ram: - ldr r0, _TEXT_BASE - ldr r2, _board_init_r - sub r2, r2, r0 - add r2, r2, r7 /* position from board_init_r in RAM */ + ldr r0, _board_init_r_ofs + adr r1, _start + add r0, r0, r1 + add lr, r0, r9 /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ /* jump to it ... */ - mov lr, r2 mov pc, lr -_board_init_r: .word board_init_r +_board_init_r_ofs: + .word board_init_r - _start + +_rel_dyn_start_ofs: + .word __rel_dyn_start - _start +_rel_dyn_end_ofs: + .word __rel_dyn_end - _start +_dynsym_start_ofs: + .word __dynsym_start - _start + #else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ /* * the actual reset code diff --git a/arch/arm/cpu/armv7/u-boot.lds b/arch/arm/cpu/armv7/u-boot.lds index d4fd3fc..88a0fec 100644 --- a/arch/arm/cpu/armv7/u-boot.lds +++ b/arch/arm/cpu/armv7/u-boot.lds @@ -53,6 +53,13 @@ SECTIONS __datarelro_start = .; *(.data.rel.ro) } + . = ALIGN(4); + __rel_dyn_start = .; + .rel.dyn : { *(.rel.dyn) } + __rel_dyn_end = .; + + __dynsym_start = .; + .dynsym : { *(.dynsym) } __got_start = .; . = ALIGN(4); diff --git a/arch/arm/cpu/pxa/cpu.c b/arch/arm/cpu/pxa/cpu.c index 800d120..3ea3458 100644 --- a/arch/arm/cpu/pxa/cpu.c +++ b/arch/arm/cpu/pxa/cpu.c @@ -30,10 +30,11 @@ * CPU specific code */ -#include <common.h> +#include <asm/io.h> +#include <asm/system.h> #include <command.h> +#include <common.h> #include <asm/arch/pxa-regs.h> -#include <asm/system.h> static void cache_flush(void); @@ -71,17 +72,249 @@ void set_GPIO_mode(int gpio_mode) { int gpio = gpio_mode & GPIO_MD_MASK_NR; int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8; - int gafr; + int val; + + /* This below changes direction setting of GPIO "gpio" */ + val = readl(GPDR(gpio)); if (gpio_mode & GPIO_MD_MASK_DIR) - { - GPDR(gpio) |= GPIO_bit(gpio); - } + val |= GPIO_bit(gpio); else - { - GPDR(gpio) &= ~GPIO_bit(gpio); - } - gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2)); - GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2)); + val &= ~GPIO_bit(gpio); + + writel(val, GPDR(gpio)); + + /* This below updates only AF of GPIO "gpio" */ + val = readl(GAFR(gpio)); + val &= ~(0x3 << (((gpio) & 0xf) * 2)); + val |= fn << (((gpio) & 0xf) * 2); + writel(val, GAFR(gpio)); } #endif /* CONFIG_CPU_MONAHANS */ + +void pxa_wait_ticks(int ticks) +{ + writel(0, OSCR); + while (readl(OSCR) < ticks) + asm volatile("":::"memory"); +} + +inline void writelrb(uint32_t val, uint32_t addr) +{ + writel(val, addr); + asm volatile("":::"memory"); + readl(addr); + asm volatile("":::"memory"); +} + +void pxa_dram_init(void) +{ + uint32_t tmp; + int i; + /* + * 1) Initialize Asynchronous static memory controller + */ + + writelrb(CONFIG_SYS_MSC0_VAL, MSC0); + writelrb(CONFIG_SYS_MSC1_VAL, MSC1); + writelrb(CONFIG_SYS_MSC2_VAL, MSC2); + /* + * 2) Initialize Card Interface + */ + + /* MECR: Memory Expansion Card Register */ + writelrb(CONFIG_SYS_MECR_VAL, MECR); + /* MCMEM0: Card Interface slot 0 timing */ + writelrb(CONFIG_SYS_MCMEM0_VAL, MCMEM0); + /* MCMEM1: Card Interface slot 1 timing */ + writelrb(CONFIG_SYS_MCMEM1_VAL, MCMEM1); + /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ + writelrb(CONFIG_SYS_MCATT0_VAL, MCATT0); + /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ + writelrb(CONFIG_SYS_MCATT1_VAL, MCATT1); + /* MCIO0: Card Interface I/O Space Timing, slot 0 */ + writelrb(CONFIG_SYS_MCIO0_VAL, MCIO0); + /* MCIO1: Card Interface I/O Space Timing, slot 1 */ + writelrb(CONFIG_SYS_MCIO1_VAL, MCIO1); + + /* + * 3) Configure Fly-By DMA register + */ + + writelrb(CONFIG_SYS_FLYCNFG_VAL, FLYCNFG); + + /* + * 4) Initialize Timing for Sync Memory (SDCLK0) + */ + + /* + * Before accessing MDREFR we need a valid DRI field, so we set + * this to power on defaults + DRI field. + */ + + /* Read current MDREFR config and zero out DRI */ + tmp = readl(MDREFR) & ~0xfff; + /* Add user-specified DRI */ + tmp |= CONFIG_SYS_MDREFR_VAL & 0xfff; + /* Configure important bits */ + tmp |= MDREFR_K0RUN | MDREFR_SLFRSH; + tmp &= ~(MDREFR_APD | MDREFR_E1PIN); + + /* Write MDREFR back */ + writelrb(tmp, MDREFR); + + /* + * 5) Initialize Synchronous Static Memory (Flash/Peripherals) + */ + + /* Initialize SXCNFG register. Assert the enable bits. + * + * Write SXMRS to cause an MRS command to all enabled banks of + * synchronous static memory. Note that SXLCR need not be written + * at this time. + */ + writelrb(CONFIG_SYS_SXCNFG_VAL, SXCNFG); + + /* + * 6) Initialize SDRAM + */ + + writelrb(CONFIG_SYS_MDREFR_VAL & ~MDREFR_SLFRSH, MDREFR); + writelrb(CONFIG_SYS_MDREFR_VAL | MDREFR_E1PIN, MDREFR); + + /* + * 7) Write MDCNFG with MDCNFG:DEx deasserted (set to 0), to configure + * but not enable each SDRAM partition pair. + */ + + writelrb(CONFIG_SYS_MDCNFG_VAL & + ~(MDCNFG_DE0 | MDCNFG_DE1 | MDCNFG_DE2 | MDCNFG_DE3), MDCNFG); + /* Wait for the clock to the SDRAMs to stabilize, 100..200 usec. */ + pxa_wait_ticks(0x300); + + /* + * 8) Trigger a number (usually 8) refresh cycles by attempting + * non-burst read or write accesses to disabled SDRAM, as commonly + * specified in the power up sequence documented in SDRAM data + * sheets. The address(es) used for this purpose must not be + * cacheable. + */ + for (i = 9; i >= 0; i--) { + writel(i, 0xa0000000); + asm volatile("":::"memory"); + } + /* + * 9) Write MDCNFG with enable bits asserted (MDCNFG:DEx set to 1). + */ + + tmp = CONFIG_SYS_MDCNFG_VAL & + (MDCNFG_DE0 | MDCNFG_DE1 | MDCNFG_DE2 | MDCNFG_DE3); + tmp |= readl(MDCNFG); + writelrb(tmp, MDCNFG); + + /* + * 10) Write MDMRS. + */ + + writelrb(CONFIG_SYS_MDMRS_VAL, MDMRS); + + /* + * 11) Enable APD + */ + + if (CONFIG_SYS_MDREFR_VAL & MDREFR_APD) { + tmp = readl(MDREFR); + tmp |= MDREFR_APD; + writelrb(tmp, MDREFR); + } +} + +void pxa_gpio_setup(void) +{ + writel(CONFIG_SYS_GPSR0_VAL, GPSR0); + writel(CONFIG_SYS_GPSR1_VAL, GPSR1); + writel(CONFIG_SYS_GPSR2_VAL, GPSR2); +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) + writel(CONFIG_SYS_GPSR3_VAL, GPSR3); +#endif + + writel(CONFIG_SYS_GPCR0_VAL, GPCR0); + writel(CONFIG_SYS_GPCR1_VAL, GPCR1); + writel(CONFIG_SYS_GPCR2_VAL, GPCR2); +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) + writel(CONFIG_SYS_GPCR3_VAL, GPCR3); +#endif + + writel(CONFIG_SYS_GPDR0_VAL, GPDR0); + writel(CONFIG_SYS_GPDR1_VAL, GPDR1); + writel(CONFIG_SYS_GPDR2_VAL, GPDR2); +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) + writel(CONFIG_SYS_GPDR3_VAL, GPDR3); +#endif + + writel(CONFIG_SYS_GAFR0_L_VAL, GAFR0_L); + writel(CONFIG_SYS_GAFR0_U_VAL, GAFR0_U); + writel(CONFIG_SYS_GAFR1_L_VAL, GAFR1_L); + writel(CONFIG_SYS_GAFR1_U_VAL, GAFR1_U); + writel(CONFIG_SYS_GAFR2_L_VAL, GAFR2_L); + writel(CONFIG_SYS_GAFR2_U_VAL, GAFR2_U); +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) + writel(CONFIG_SYS_GAFR3_L_VAL, GAFR3_L); + writel(CONFIG_SYS_GAFR3_U_VAL, GAFR3_U); +#endif + + writel(CONFIG_SYS_PSSR_VAL, PSSR); +} + +void pxa_interrupt_setup(void) +{ + writel(0, ICLR); + writel(0, ICMR); +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) + writel(0, ICLR2); + writel(0, ICMR2); +#endif +} + +void pxa_clock_setup(void) +{ +#ifndef CONFIG_CPU_MONAHANS + writel(CONFIG_SYS_CKEN, CKEN); + writel(CONFIG_SYS_CCCR, CCCR); + asm volatile("mcr p14, 0, %0, c6, c0, 0"::"r"(2)); +#else +/* Set CKENA/CKENB/ACCR for MH */ +#endif + + /* enable the 32Khz oscillator for RTC and PowerManager */ + writel(OSCC_OON, OSCC); + while(!(readl(OSCC) & OSCC_OOK)) + asm volatile("":::"memory"); +} + +void pxa_wakeup(void) +{ + uint32_t rcsr; + + rcsr = readl(RCSR); + writel(rcsr & (RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR), RCSR); + + /* Wakeup */ + if (rcsr & RCSR_SMR) { + writel(PSSR_PH, PSSR); + pxa_dram_init(); + icache_disable(); + dcache_disable(); + asm volatile("mov pc, %0"::"r"(readl(PSSR))); + } +} + +int arch_cpu_init(void) +{ + pxa_gpio_setup(); +// pxa_wait_ticks(0x8000); + pxa_wakeup(); + pxa_interrupt_setup(); + pxa_clock_setup(); + return 0; +} diff --git a/arch/arm/cpu/pxa/i2c.c b/arch/arm/cpu/pxa/i2c.c index 6b72ba1..7aa49ae 100644 --- a/arch/arm/cpu/pxa/i2c.c +++ b/arch/arm/cpu/pxa/i2c.c @@ -33,6 +33,7 @@ /* FIXME: this file is PXA255 specific! What about other XScales? */ #include <common.h> +#include <asm/io.h> #ifdef CONFIG_HARD_I2C @@ -93,19 +94,21 @@ struct i2c_msg { static void i2c_reset( void ) { - ICR &= ~ICR_IUE; /* disable unit */ - ICR |= ICR_UR; /* reset the unit */ + writel(readl(ICR) & ~ICR_IUE, ICR); /* disable unit */ + writel(readl(ICR) | ICR_UR, ICR); /* reset the unit */ udelay(100); - ICR &= ~ICR_IUE; /* disable unit */ + writel(readl(ICR) & ~ICR_IUE, ICR); /* disable unit */ #ifdef CONFIG_CPU_MONAHANS - CKENB |= (CKENB_4_I2C); /* | CKENB_1_PWM1 | CKENB_0_PWM0); */ + /* | CKENB_1_PWM1 | CKENB_0_PWM0); */ + writel(readl(CKENB) | (CKENB_4_I2C), CKENB); #else /* CONFIG_CPU_MONAHANS */ - CKEN |= CKEN14_I2C; /* set the global I2C clock on */ + /* set the global I2C clock on */ + writel(readl(CKEN) | CKEN14_I2C, CKEN); #endif - ISAR = I2C_PXA_SLAVE_ADDR; /* set our slave address */ - ICR = I2C_ICR_INIT; /* set control register values */ - ISR = I2C_ISR_INIT; /* set clear interrupt bits */ - ICR |= ICR_IUE; /* enable unit */ + writel(I2C_PXA_SLAVE_ADDR, ISAR); /* set our slave address */ + writel(I2C_ICR_INIT, ICR); /* set control reg values */ + writel(I2C_ISR_INIT, ISR); /* set clear interrupt bits */ + writel(readl(ICR) | ICR_IUE, ICR); /* enable unit */ udelay(100); } @@ -159,22 +162,26 @@ int i2c_transfer(struct i2c_msg *msg) goto transfer_error_bus_busy; /* start transmission */ - ICR &= ~ICR_START; - ICR &= ~ICR_STOP; - IDBR = msg->data; - if (msg->condition == I2C_COND_START) ICR |= ICR_START; - if (msg->condition == I2C_COND_STOP) ICR |= ICR_STOP; - if (msg->acknack == I2C_ACKNAK_SENDNAK) ICR |= ICR_ACKNAK; - if (msg->acknack == I2C_ACKNAK_SENDACK) ICR &= ~ICR_ACKNAK; - ICR &= ~ICR_ALDIE; - ICR |= ICR_TB; + writel(readl(ICR) & ~ICR_START, ICR); + writel(readl(ICR) & ~ICR_STOP, ICR); + writel(msg->data, IDBR); + if (msg->condition == I2C_COND_START) + writel(readl(ICR) | ICR_START, ICR); + if (msg->condition == I2C_COND_STOP) + writel(readl(ICR) | ICR_STOP, ICR); + if (msg->acknack == I2C_ACKNAK_SENDNAK) + writel(readl(ICR) | ICR_ACKNAK, ICR); + if (msg->acknack == I2C_ACKNAK_SENDACK) + writel(readl(ICR) & ~ICR_ACKNAK, ICR); + writel(readl(ICR) & ~ICR_ALDIE, ICR); + writel(readl(ICR) | ICR_TB, ICR); /* transmit register empty? */ if (!i2c_isr_set_cleared(ISR_ITE,0)) goto transfer_error_transmit_timeout; /* clear 'transmit empty' state */ - ISR |= ISR_ITE; + writel(readl(ISR) | ISR_ITE, ISR); /* wait for ACK from slave */ if (msg->acknack == I2C_ACKNAK_WAITACK) @@ -189,23 +196,27 @@ int i2c_transfer(struct i2c_msg *msg) goto transfer_error_bus_busy; /* start receive */ - ICR &= ~ICR_START; - ICR &= ~ICR_STOP; - if (msg->condition == I2C_COND_START) ICR |= ICR_START; - if (msg->condition == I2C_COND_STOP) ICR |= ICR_STOP; - if (msg->acknack == I2C_ACKNAK_SENDNAK) ICR |= ICR_ACKNAK; - if (msg->acknack == I2C_ACKNAK_SENDACK) ICR &= ~ICR_ACKNAK; - ICR &= ~ICR_ALDIE; - ICR |= ICR_TB; + writel(readl(ICR) & ~ICR_START, ICR); + writel(readl(ICR) & ~ICR_STOP, ICR); + if (msg->condition == I2C_COND_START) + writel(readl(ICR) | ICR_START, ICR); + if (msg->condition == I2C_COND_STOP) + writel(readl(ICR) | ICR_STOP, ICR); + if (msg->acknack == I2C_ACKNAK_SENDNAK) + writel(readl(ICR) | ICR_ACKNAK, ICR); + if (msg->acknack == I2C_ACKNAK_SENDACK) + writel(readl(ICR) & ~ICR_ACKNAK, ICR); + writel(readl(ICR) & ~ICR_ALDIE, ICR); + writel(readl(ICR) | ICR_TB, ICR); /* receive register full? */ if (!i2c_isr_set_cleared(ISR_IRF,0)) goto transfer_error_receive_timeout; - msg->data = IDBR; + msg->data = readl(IDBR); /* clear 'receive empty' state */ - ISR |= ISR_IRF; + writel(readl(ISR) | ISR_IRF, ISR); break; diff --git a/arch/arm/cpu/pxa/pxafb.c b/arch/arm/cpu/pxa/pxafb.c index 0ee6a75..987fa06 100644 --- a/arch/arm/cpu/pxa/pxafb.c +++ b/arch/arm/cpu/pxa/pxafb.c @@ -35,6 +35,7 @@ #include <stdio_dev.h> #include <lcd.h> #include <asm/arch/pxa-regs.h> +#include <asm/io.h> /* #define DEBUG */ @@ -56,26 +57,26 @@ /* 640x480x16 @ 61 Hz */ vidinfo_t panel_info = { - vl_col: 640, - vl_row: 480, - vl_width: 640, - vl_height: 480, - vl_clkp: CONFIG_SYS_HIGH, - vl_oep: CONFIG_SYS_HIGH, - vl_hsp: CONFIG_SYS_HIGH, - vl_vsp: CONFIG_SYS_HIGH, - vl_dp: CONFIG_SYS_HIGH, - vl_bpix: LCD_BPP, - vl_lbw: 0, - vl_splt: 0, - vl_clor: 0, - vl_tft: 1, - vl_hpw: 40, - vl_blw: 56, - vl_elw: 56, - vl_vpw: 20, - vl_bfw: 8, - vl_efw: 8, + .vl_col = 640, + .vl_row = 480, + .vl_width = 640, + .vl_height = 480, + .vl_clkp = CONFIG_SYS_HIGH, + .vl_oep = CONFIG_SYS_HIGH, + .vl_hsp = CONFIG_SYS_HIGH, + .vl_vsp = CONFIG_SYS_HIGH, + .vl_dp = CONFIG_SYS_HIGH, + .vl_bpix = LCD_BPP, + .vl_lbw = 0, + .vl_splt = 0, + .vl_clor = 0, + .vl_tft = 1, + .vl_hpw = 40, + .vl_blw = 56, + .vl_elw = 56, + .vl_vpw = 20, + .vl_bfw = 8, + .vl_efw = 8, }; #endif /* CONFIG_PXA_VIDEO */ @@ -90,26 +91,26 @@ vidinfo_t panel_info = { # define REG_LCCR3 0x0340FF08 vidinfo_t panel_info = { - vl_col: 640, - vl_row: 480, - vl_width: 157, - vl_height: 118, - vl_clkp: CONFIG_SYS_HIGH, - vl_oep: CONFIG_SYS_HIGH, - vl_hsp: CONFIG_SYS_HIGH, - vl_vsp: CONFIG_SYS_HIGH, - vl_dp: CONFIG_SYS_HIGH, - vl_bpix: LCD_BPP, - vl_lbw: 0, - vl_splt: 1, - vl_clor: 1, - vl_tft: 0, - vl_hpw: 1, - vl_blw: 3, - vl_elw: 3, - vl_vpw: 1, - vl_bfw: 0, - vl_efw: 0, + .vl_col = 640, + .vl_row = 480, + .vl_width = 157, + .vl_height = 118, + .vl_clkp = CONFIG_SYS_HIGH, + .vl_oep = CONFIG_SYS_HIGH, + .vl_hsp = CONFIG_SYS_HIGH, + .vl_vsp = CONFIG_SYS_HIGH, + .vl_dp = CONFIG_SYS_HIGH, + .vl_bpix = LCD_BPP, + .vl_lbw = 0, + .vl_splt = 1, + .vl_clor = 1, + .vl_tft = 0, + .vl_hpw = 1, + .vl_blw = 3, + .vl_elw = 3, + .vl_vpw = 1, + .vl_bfw = 0, + .vl_efw = 0, }; #endif /* CONFIG_SHARP_LM8V31 */ /*----------------------------------------------------------------------*/ @@ -123,26 +124,26 @@ vidinfo_t panel_info = { # define REG_LCCR3 0x0340FF08 vidinfo_t panel_info = { - vl_col: 640, - vl_row: 480, - vl_width: 157, - vl_height: 118, - vl_clkp: CONFIG_SYS_HIGH, - vl_oep: CONFIG_SYS_HIGH, - vl_hsp: CONFIG_SYS_HIGH, - vl_vsp: CONFIG_SYS_HIGH, - vl_dp: CONFIG_SYS_HIGH, - vl_bpix: LCD_BPP, - vl_lbw: 0, - vl_splt: 1, - vl_clor: 1, - vl_tft: 1, - vl_hpw: 32, - vl_blw: 144, - vl_elw: 32, - vl_vpw: 2, - vl_bfw: 13, - vl_efw: 30, + .vl_col = 640, + .vl_row = 480, + .vl_width = 157, + .vl_height = 118, + .vl_clkp = CONFIG_SYS_HIGH, + .vl_oep = CONFIG_SYS_HIGH, + .vl_hsp = CONFIG_SYS_HIGH, + .vl_vsp = CONFIG_SYS_HIGH, + .vl_dp = CONFIG_SYS_HIGH, + .vl_bpix = LCD_BPP, + .vl_lbw = 0, + .vl_splt = 1, + .vl_clor = 1, + .vl_tft = 1, + .vl_hpw = 32, + .vl_blw = 144, + .vl_elw = 32, + .vl_vpw = 2, + .vl_bfw = 13, + .vl_efw = 30, }; #endif /* CONFIG_VOIPAC_LCD */ @@ -156,26 +157,26 @@ vidinfo_t panel_info = { #define REG_LCCR3 0x0340FF20 vidinfo_t panel_info = { - vl_col: 320, - vl_row: 240, - vl_width: 167, - vl_height: 109, - vl_clkp: CONFIG_SYS_HIGH, - vl_oep: CONFIG_SYS_HIGH, - vl_hsp: CONFIG_SYS_HIGH, - vl_vsp: CONFIG_SYS_HIGH, - vl_dp: CONFIG_SYS_HIGH, - vl_bpix: LCD_BPP, - vl_lbw: 1, - vl_splt: 0, - vl_clor: 1, - vl_tft: 0, - vl_hpw: 1, - vl_blw: 1, - vl_elw: 1, - vl_vpw: 7, - vl_bfw: 0, - vl_efw: 0, + .vl_col = 320, + .vl_row = 240, + .vl_width = 167, + .vl_height = 109, + .vl_clkp = CONFIG_SYS_HIGH, + .vl_oep = CONFIG_SYS_HIGH, + .vl_hsp = CONFIG_SYS_HIGH, + .vl_vsp = CONFIG_SYS_HIGH, + .vl_dp = CONFIG_SYS_HIGH, + .vl_bpix = LCD_BPP, + .vl_lbw = 1, + .vl_splt = 0, + .vl_clor = 1, + .vl_tft = 0, + .vl_hpw = 1, + .vl_blw = 1, + .vl_elw = 1, + .vl_vpw = 7, + .vl_bfw = 0, + .vl_efw = 0, }; #endif /* CONFIG_HITACHI_SX14 */ @@ -190,31 +191,132 @@ vidinfo_t panel_info = { # define REG_LCCR3 0x03b00009 vidinfo_t panel_info = { - vl_col: 240, - vl_row: 320, - vl_width: 240, - vl_height: 320, - vl_clkp: CONFIG_SYS_HIGH, - vl_oep: CONFIG_SYS_LOW, - vl_hsp: CONFIG_SYS_LOW, - vl_vsp: CONFIG_SYS_LOW, - vl_dp: CONFIG_SYS_HIGH, - vl_bpix: LCD_BPP, - vl_lbw: 0, - vl_splt: 1, - vl_clor: 1, - vl_tft: 1, - vl_hpw: 4, - vl_blw: 4, - vl_elw: 8, - vl_vpw: 4, - vl_bfw: 4, - vl_efw: 8, + .vl_col = 240, + .vl_row = 320, + .vl_width = 240, + .vl_height = 320, + .vl_clkp = CONFIG_SYS_HIGH, + .vl_oep = CONFIG_SYS_LOW, + .vl_hsp = CONFIG_SYS_LOW, + .vl_vsp = CONFIG_SYS_LOW, + .vl_dp = CONFIG_SYS_HIGH, + .vl_bpix = LCD_BPP, + .vl_lbw = 0, + .vl_splt = 1, + .vl_clor = 1, + .vl_tft = 1, + .vl_hpw = 4, + .vl_blw = 4, + .vl_elw = 8, + .vl_vpw = 4, + .vl_bfw = 4, + .vl_efw = 8, }; #endif /* CONFIG_LMS283GF05 */ /*----------------------------------------------------------------------*/ +#ifdef CONFIG_ACX517AKN + +# define LCD_BPP LCD_COLOR8 + +/* you have to set lccr0 and lccr3 (including pcd) */ +# define REG_LCCR0 0x003008f9 +# define REG_LCCR3 0x03700006 + +vidinfo_t panel_info = { + .vl_col = 320, + .vl_row = 320, + .vl_width = 320, + .vl_height = 320, + .vl_clkp = CONFIG_SYS_HIGH, + .vl_oep = CONFIG_SYS_LOW, + .vl_hsp = CONFIG_SYS_LOW, + .vl_vsp = CONFIG_SYS_LOW, + .vl_dp = CONFIG_SYS_HIGH, + .vl_bpix = LCD_BPP, + .vl_lbw = 0, + .vl_splt = 1, + .vl_clor = 1, + .vl_tft = 1, + .vl_hpw = 0x04, + .vl_blw = 0x1c, + .vl_elw = 0x08, + .vl_vpw = 0x01, + .vl_bfw = 0x07, + .vl_efw = 0x08, +}; +#endif /* CONFIG_ACX517AKN */ + +/*----------------------------------------------------------------------*/ + +#ifdef CONFIG_LQ038J7DH53 + +# define LCD_BPP LCD_COLOR8 + +/* you have to set lccr0 and lccr3 (including pcd) */ +# define REG_LCCR0 0x003008f9 +# define REG_LCCR3 0x03700004 + +vidinfo_t panel_info = { + .vl_col = 320, + .vl_row = 480, + .vl_width = 320, + .vl_height = 480, + .vl_clkp = CONFIG_SYS_HIGH, + .vl_oep = CONFIG_SYS_LOW, + .vl_hsp = CONFIG_SYS_LOW, + .vl_vsp = CONFIG_SYS_LOW, + .vl_dp = CONFIG_SYS_HIGH, + .vl_bpix = LCD_BPP, + .vl_lbw = 0, + .vl_splt = 1, + .vl_clor = 1, + .vl_tft = 1, + .vl_hpw = 0x04, + .vl_blw = 0x20, + .vl_elw = 0x01, + .vl_vpw = 0x01, + .vl_bfw = 0x04, + .vl_efw = 0x01, +}; +#endif /* CONFIG_ACX517AKN */ + +/*----------------------------------------------------------------------*/ + +#ifdef CONFIG_LITTLETON_LCD +# define LCD_BPP LCD_COLOR8 + +/* you have to set lccr0 and lccr3 (including pcd) */ +# define REG_LCCR0 0x003008f8 +# define REG_LCCR3 0x0300FF04 + +vidinfo_t panel_info = { + .vl_col = 480, + .vl_row = 640, + .vl_width = 480, + .vl_height = 640, + .vl_clkp = CONFIG_SYS_HIGH, + .vl_oep = CONFIG_SYS_HIGH, + .vl_hsp = CONFIG_SYS_HIGH, + .vl_vsp = CONFIG_SYS_HIGH, + .vl_dp = CONFIG_SYS_HIGH, + .vl_bpix = LCD_BPP, + .vl_lbw = 0, + .vl_splt = 0, + .vl_clor = 0, + .vl_tft = 1, + .vl_hpw = 9, + .vl_blw = 8, + .vl_elw = 24, + .vl_vpw = 2, + .vl_bfw = 2, + .vl_efw = 4, +}; +#endif /* CONFIG_LITTLETON_LCD */ + +/*----------------------------------------------------------------------*/ + #if LCD_BPP == LCD_COLOR8 void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue); #endif @@ -377,12 +479,14 @@ static void pxafb_setup_gpio (vidinfo_t *vid) { debug("Setting GPIO for 4 bit data\n"); /* bits 58-61 */ - GPDR1 |= (0xf << 26); - GAFR1_U = (GAFR1_U & ~(0xff << 20)) | (0xaa << 20); + writel(readl(GPDR1) | (0xf << 26), GPDR1); + writel((readl(GAFR1_U) & ~(0xff << 20)) | (0xaa << 20), + GAFR1_U); /* bits 74-77 */ - GPDR2 |= (0xf << 10); - GAFR2_L = (GAFR2_L & ~(0xff << 20)) | (0xaa << 20); + writel(readl(GPDR2) | (0xf << 10), GPDR2); + writel((readl(GAFR2_L) & ~(0xff << 20)) | (0xaa << 20), + GAFR2_L); } /* 8 bit interface */ @@ -391,15 +495,17 @@ static void pxafb_setup_gpio (vidinfo_t *vid) { debug("Setting GPIO for 8 bit data\n"); /* bits 58-65 */ - GPDR1 |= (0x3f << 26); - GPDR2 |= (0x3); + writel(readl(GPDR1) | (0x3f << 26), GPDR1); + writel(readl(GPDR2) | (0x3), GPDR2); - GAFR1_U = (GAFR1_U & ~(0xfff << 20)) | (0xaaa << 20); - GAFR2_L = (GAFR2_L & ~0xf) | (0xa); + writel((readl(GAFR1_U) & ~(0xfff << 20)) | (0xaaa << 20), + GAFR1_U); + writel((readl(GAFR2_L) & ~0xf) | (0xa), GAFR2_L); /* bits 74-77 */ - GPDR2 |= (0xf << 10); - GAFR2_L = (GAFR2_L & ~(0xff << 20)) | (0xaa << 20); + writel(readl(GPDR2) | (0xf << 10), GPDR2); + writel((readl(GAFR2_L) & ~(0xff << 20)) | (0xaa << 20), + GAFR2_L); } /* 16 bit interface */ @@ -407,11 +513,12 @@ static void pxafb_setup_gpio (vidinfo_t *vid) { debug("Setting GPIO for 16 bit data\n"); /* bits 58-77 */ - GPDR1 |= (0x3f << 26); - GPDR2 |= 0x00003fff; + writel(readl(GPDR1) | (0x3f << 26), GPDR1); + writel(readl(GPDR2) | 0x00003fff, GPDR2); - GAFR1_U = (GAFR1_U & ~(0xfff << 20)) | (0xaaa << 20); - GAFR2_L = (GAFR2_L & 0xf0000000) | 0x0aaaaaaa; + writel((readl(GAFR1_U) & ~(0xfff << 20)) | (0xaaa << 20), + GAFR1_U); + writel((readl(GAFR2_L) & 0xf0000000) | 0x0aaaaaaa, GAFR2_L); } else { @@ -425,26 +532,26 @@ static void pxafb_enable_controller (vidinfo_t *vid) debug("Enabling LCD controller\n"); /* Sequence from 11.7.10 */ - LCCR3 = vid->pxa.reg_lccr3; - LCCR2 = vid->pxa.reg_lccr2; - LCCR1 = vid->pxa.reg_lccr1; - LCCR0 = vid->pxa.reg_lccr0 & ~LCCR0_ENB; - FDADR0 = vid->pxa.fdadr0; - FDADR1 = vid->pxa.fdadr1; - LCCR0 |= LCCR0_ENB; + writel(vid->pxa.reg_lccr3, LCCR3); + writel(vid->pxa.reg_lccr2, LCCR2); + writel(vid->pxa.reg_lccr1, LCCR1); + writel(vid->pxa.reg_lccr0 & ~LCCR0_ENB, LCCR0); + writel(vid->pxa.fdadr0, FDADR0); + writel(vid->pxa.fdadr1, FDADR1); + writel(readl(LCCR0) | LCCR0_ENB, LCCR0); #ifdef CONFIG_CPU_MONAHANS - CKENA |= CKENA_1_LCD; + writel(readl(CKENA) | CKENA_1_LCD, CKENA); #else - CKEN |= CKEN16_LCD; + writel(readl(CKEN) | CKEN16_LCD, CKEN); #endif - debug("FDADR0 = 0x%08x\n", (unsigned int)FDADR0); - debug("FDADR1 = 0x%08x\n", (unsigned int)FDADR1); - debug("LCCR0 = 0x%08x\n", (unsigned int)LCCR0); - debug("LCCR1 = 0x%08x\n", (unsigned int)LCCR1); - debug("LCCR2 = 0x%08x\n", (unsigned int)LCCR2); - debug("LCCR3 = 0x%08x\n", (unsigned int)LCCR3); + debug("FDADR0 = 0x%08x\n", readl(FDADR0)); + debug("FDADR1 = 0x%08x\n", readl(FDADR1)); + debug("LCCR0 = 0x%08x\n", readl(LCCR0)); + debug("LCCR1 = 0x%08x\n", readl(LCCR1)); + debug("LCCR2 = 0x%08x\n", readl(LCCR2)); + debug("LCCR3 = 0x%08x\n", readl(LCCR3)); } static int pxafb_init (vidinfo_t *vid) diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index 9c5023b..684e44e 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -31,6 +31,14 @@ #include <config.h> #include <version.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/macro.h> + +/* takes care the CP15 update has taken place */ +.macro CPWAIT reg +mrc p15,0,\reg,c2,c0,0 +mov \reg,\reg +sub pc,pc,#4 +.endm .globl _start _start: b reset @@ -86,11 +94,9 @@ _fiq: .word fiq _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) .globl _armboot_start _armboot_start: .word _start -#endif /* * These are defined in the board-specific linker script. @@ -115,7 +121,7 @@ FIQ_STACK_START: .word 0x0badc0de #endif /* CONFIG_USE_IRQ */ -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) +#ifndef CONFIG_PRELOADER /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -159,12 +165,84 @@ reset: msr cpsr,r0 /* - * we do sys-critical inits only at reboot, - * not when booting from ram! + * Enable MMU to use DCache as DRAM */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif + /* Domain access -- enable for all CPs */ + ldr r0, =0x0000ffff + mcr p15, 0, r0, c3, c0, 0 + + /* Point TTBR to MMU table */ + ldr r0, =mmu_table + adr r2, _start + orr r0, r2 + mcr p15, 0, r0, c2, c0, 0 + +/* !!! Hereby, check if the code is running from SRAM !!! */ +/* If the code is running from SRAM, alias SRAM to 0x0 to simulate NOR. The code + * is linked to 0x0 too, so this makes things easier. */ + cmp r2, #0x5c000000 + + ldreq r1, [r0] + orreq r1, r2 + streq r1, [r0] + + /* Kick in MMU, ICache, DCache, BTB */ + mrc p15, 0, r0, c1, c0, 0 + bic r0, #0x1b00 + bic r0, #0x0087 + orr r0, #0x1800 + orr r0, #0x0005 + mcr p15, 0, r0, c1, c0, 0 + CPWAIT r0 + + /* Unlock Icache, Dcache */ + mcr p15, 0, r0, c9, c1, 1 + mcr p15, 0, r0, c9, c2, 1 + + /* Flush Icache, Dcache, BTB */ + mcr p15, 0, r0, c7, c7, 0 + + /* Unlock I-TLB, D-TLB */ + mcr p15, 0, r0, c10, c4, 1 + mcr p15, 0, r0, c10, c8, 1 + + /* Flush TLB */ + mcr p15, 0, r0, c8, c7, 0 + /* Allocate 4096 bytes of Dcache as RAM */ + + /* Drain pending loads and stores */ + mcr p15, 0, r0, c7, c10, 4 + + mov r4, #0x00 + mov r5, #0x00 + mov r2, #0x01 + mcr p15, 0, r0, c9, c2, 0 + CPWAIT r0 + + /* 128 lines reserved (128 x 32bytes = 4096 bytes total) */ + mov r0, #128 + mov r1, #0xa0000000 +alloc: + mcr p15, 0, r1, c7, c2, 5 + /* Drain pending loads and stores */ + mcr p15, 0, r0, c7, c10, 4 + strd r4, [r1], #8 + strd r4, [r1], #8 + strd r4, [r1], #8 + strd r4, [r1], #8 + subs r0, #0x01 + bne alloc + /* Drain pending loads and stores */ + mcr p15, 0, r0, c7, c10, 4 + mov r2, #0x00 + mcr p15, 0, r2, c9, c2, 0 + CPWAIT r0 + + /* Jump to 0x0 ( + offset) if running from SRAM */ + adr r0, zerojmp + bic r0, #0x5c000000 + mov pc, r0 +zerojmp: /* Set stackpointer in internal RAM to call board_init_f */ call_board_init_f: @@ -201,11 +279,13 @@ stack_setup: beq clear_bss #ifndef CONFIG_SKIP_RELOCATE_UBOOT + stmfd sp!, {r0-r12} copy_loop: - ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r6!, {r9-r10} /* copy to target address [r1] */ + ldmia r0!, {r3-r5, r7-r11} /* copy from source address [r0] */ + stmia r6!, {r3-r5, r7-r11} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop + ldmfd sp!, {r0-r12} #ifndef CONFIG_PRELOADER /* fix got entries */ @@ -274,218 +354,28 @@ _board_init_r: .word board_init_r /****************************************************************************/ /* */ -/* the actual reset code */ +/* the actual reset code for OneNAND IPL */ /* */ /****************************************************************************/ +#ifndef CONFIG_PXA27X +#error OneNAND IPL is not supported on PXA25x and 26x due to lack of SRAM +#endif + reset: - mrs r0,cpsr /* set the CPU to SVC32 mode */ - bic r0,r0,#0x1f /* (superviser mode, M=10011) */ + /* Set CPU to SVC32 mode */ + mrs r0,cpsr + bic r0,r0,#0x1f orr r0,r0,#0x13 msr cpsr,r0 - /* - * we do sys-critical inits only at reboot, - * not when booting from RAM! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit /* we do sys-critical inits */ -#endif /* !CONFIG_SKIP_LOWLEVEL_INIT */ - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ -#ifndef CONFIG_PRELOADER - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup -#endif - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* !CONFIG_SKIP_RELOCATE_UBOOT */ + /* Point stack at the end of SRAM and leave 32 words for abort-stack */ + ldr sp, =0x5c03ff80 - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ -#ifdef CONFIG_PRELOADER - sub sp, r0, #128 /* leave 32 words for abort-stack */ -#else - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif /* CONFIG_USE_IRQ */ - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ -#endif + /* Start OneNAND IPL */ + ldr pc, =start_oneboot -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -#ifndef CONFIG_PRELOADER -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l -#endif - - ldr pc, _start_armboot - -#ifdef CONFIG_ONENAND_IPL -_start_armboot: .word start_oneboot -#else -_start_armboot: .word start_armboot -#endif -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - -/****************************************************************************/ -/* */ -/* CPU_init_critical registers */ -/* */ -/* - setup important registers */ -/* - setup memory timing */ -/* */ -/****************************************************************************/ -/* mk@tbd: Fix this! */ -#undef RCSR -#undef ICMR -#undef OSMR3 -#undef OSCR -#undef OWER -#undef OIER -#undef CCCR - -/* Interrupt-Controller base address */ -IC_BASE: .word 0x40d00000 -#define ICMR 0x04 - -/* Reset-Controller */ -RST_BASE: .word 0x40f00030 -#define RCSR 0x00 - -/* Operating System Timer */ -OSTIMER_BASE: .word 0x40a00000 -#define OSMR3 0x0C -#define OSCR 0x10 -#define OWER 0x18 -#define OIER 0x1C - -/* Clock Manager Registers */ -#ifdef CONFIG_CPU_MONAHANS -# ifndef CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO -# error "You have to define CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO!!" -# endif /* !CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO */ -# ifndef CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO -# define CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO 0x1 -# endif /* !CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO */ -#else /* !CONFIG_CPU_MONAHANS */ -#ifdef CONFIG_SYS_CPUSPEED -CC_BASE: .word 0x41300000 -#define CCCR 0x00 -cpuspeed: .word CONFIG_SYS_CPUSPEED -#else /* !CONFIG_SYS_CPUSPEED */ -#error "You have to define CONFIG_SYS_CPUSPEED!!" -#endif /* CONFIG_SYS_CPUSPEED */ -#endif /* CONFIG_CPU_MONAHANS */ - - /* takes care the CP15 update has taken place */ - .macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 - .endm - -cpu_init_crit: - - /* mask all IRQs */ -#ifndef CONFIG_CPU_MONAHANS - ldr r0, IC_BASE - mov r1, #0x00 - str r1, [r0, #ICMR] -#else /* CONFIG_CPU_MONAHANS */ - /* Step 1 - Enable CP6 permission */ - mrc p15, 0, r1, c15, c1, 0 @ read CPAR - orr r1, r1, #0x40 - mcr p15, 0, r1, c15, c1, 0 - CPWAIT r1 - - /* Step 2 - Mask ICMR & ICMR2 */ - mov r1, #0 - mcr p6, 0, r1, c1, c0, 0 @ ICMR - mcr p6, 0, r1, c7, c0, 0 @ ICMR2 - - /* turn off all clocks but the ones we will definitly require */ - ldr r1, =CKENA - ldr r2, =(CKENA_22_FFUART | CKENA_10_SRAM | CKENA_9_SMC | CKENA_8_DMC) - str r2, [r1] - ldr r1, =CKENB - ldr r2, =(CKENB_6_IRQ) - str r2, [r1] -#endif /* !CONFIG_CPU_MONAHANS */ - - /* set clock speed */ -#ifdef CONFIG_CPU_MONAHANS - ldr r0, =ACCR - ldr r1, =(((CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO<<8) & ACCR_XN_MASK) | (CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO & ACCR_XL_MASK)) - str r1, [r0] -#else /* !CONFIG_CPU_MONAHANS */ -#ifdef CONFIG_SYS_CPUSPEED - ldr r0, CC_BASE - ldr r1, cpuspeed - str r1, [r0, #CCCR] - mov r0, #2 - mcr p14, 0, r0, c6, c0, 0 - -setspeed_done: - -#endif /* CONFIG_SYS_CPUSPEED */ -#endif /* CONFIG_CPU_MONAHANS */ - - /* - * before relocating, we have to setup RAM timing - * because memory timing is board-dependend, you will - * find a lowlevel_init.S in your board directory. - */ - mov ip, lr - bl lowlevel_init - mov lr, ip - - /* Memory interfaces are working. Disable MMU and enable I-cache. */ - /* mk: hmm, this is not in the monahans docs, leave it now but - * check here if it doesn't work :-) */ - - ldr r0, =0x2001 /* enable access to all coproc. */ - mcr p15, 0, r0, c15, c1, 0 - CPWAIT r0 - - mcr p15, 0, r0, c7, c10, 4 /* drain the write & fill buffers */ - CPWAIT r0 - - mcr p15, 0, r0, c7, c7, 0 /* flush Icache, Dcache and BTB */ - CPWAIT r0 - - mcr p15, 0, r0, c8, c7, 0 /* flush instuction and data TLBs */ - CPWAIT r0 - - /* Enable the Icache */ -/* - mrc p15, 0, r0, c1, c0, 0 - orr r0, r0, #0x1800 - mcr p15, 0, r0, c1, c0, 0 - CPWAIT -*/ - mov pc, lr +#endif /* #if !defined(CONFIG_ONENAND_IPL) */ #ifndef CONFIG_PRELOADER /****************************************************************************/ @@ -676,6 +566,12 @@ fiq: /* perform a watchdog timeout for a soft reset. */ /* */ /****************************************************************************/ +/* Operating System Timer */ +OSTIMER_BASE: .word 0x40a00000 +#define OSMR3 0x0C +#define OSCR 0x10 +#define OWER 0x18 +#define OIER 0x1C .align 5 .globl reset_cpu @@ -703,3 +599,25 @@ reset_cpu: reset_endless: b reset_endless + +#ifndef CONFIG_PRELOADER +.section .mmudata, "a" + .align 14 + .globl mmu_table +mmu_table: + /* 0x00000000 - 0xa0000000 : 1:1, uncached mapping */ + .set __base, 0 + .rept 0xa00 + .word (__base << 20) | 0xc12 + .set __base, __base + 1 + .endr + + /* 0xa0000000 - 0xa0100000 : 1:1, cached mapping */ + .word (0xa00 << 20) | 0x1c1e + + .set __base, 0xa01 + .rept 0x1000 - 0xa01 + .word (__base << 20) | 0xc12 + .set __base, __base + 1 + .endr +#endif diff --git a/arch/arm/cpu/pxa/timer.c b/arch/arm/cpu/pxa/timer.c index 8d0f826..ec950c7 100644 --- a/arch/arm/cpu/pxa/timer.c +++ b/arch/arm/cpu/pxa/timer.c @@ -26,8 +26,9 @@ * MA 02111-1307 USA */ -#include <common.h> #include <asm/arch/pxa-regs.h> +#include <asm/io.h> +#include <common.h> #include <div64.h> #ifdef CONFIG_USE_IRQ @@ -86,7 +87,7 @@ void __udelay (unsigned long usec) void reset_timer_masked (void) { - OSCR = 0; + writel(0, OSCR); } ulong get_timer_masked (void) @@ -113,7 +114,7 @@ void udelay_masked (unsigned long usec) */ unsigned long long get_ticks(void) { - return OSCR; + return readl(OSCR); } /* diff --git a/arch/arm/cpu/pxa/usb.c b/arch/arm/cpu/pxa/usb.c index bd718a6..0311d5e 100644 --- a/arch/arm/cpu/pxa/usb.c +++ b/arch/arm/cpu/pxa/usb.c @@ -27,86 +27,79 @@ # if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X) #include <asm/arch/pxa-regs.h> +#include <asm/io.h> #include <usb.h> int usb_cpu_init(void) { #if defined(CONFIG_CPU_MONAHANS) /* Enable USB host clock. */ - CKENA |= (CKENA_2_USBHOST | CKENA_20_UDC); + writel(readl(CKENA) | CKENA_2_USBHOST | CKENA_20_UDC, CKENA); udelay(100); #endif #if defined(CONFIG_PXA27X) /* Enable USB host clock. */ - CKEN |= CKEN10_USBHOST; + writel(readl(CKEN) | CKEN10_USBHOST, CKEN); #endif #if defined(CONFIG_CPU_MONAHANS) /* Configure Port 2 for Host (USB Client Registers) */ - UP2OCR = 0x3000c; + writel(0x3000c, UP2OCR); #endif - UHCHR |= UHCHR_FHR; + writel(readl(UHCHR) | UHCHR_FHR, UHCHR); wait_ms(11); - UHCHR &= ~UHCHR_FHR; + writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR); - UHCHR |= UHCHR_FSBIR; - while (UHCHR & UHCHR_FSBIR) + writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR); + while (readl(UHCHR) & UHCHR_FSBIR) udelay(1); #if defined(CONFIG_CPU_MONAHANS) - UHCHR &= ~UHCHR_SSEP0; + writel(readl(UHCHR) & ~UHCHR_SSEP0, UHCHR); #endif #if defined(CONFIG_PXA27X) - UHCHR &= ~UHCHR_SSEP2; + writel(readl(UHCHR) & ~UHCHR_SSEP2, UHCHR); #endif - UHCHR &= ~UHCHR_SSEP1; - UHCHR &= ~UHCHR_SSE; + writel(readl(UHCHR) & ~(UHCHR_SSEP1 | UHCHR_SSE), UHCHR); return 0; } int usb_cpu_stop(void) { - UHCHR |= UHCHR_FHR; + writel(readl(UHCHR) | UHCHR_FHR, UHCHR); udelay(11); - UHCHR &= ~UHCHR_FHR; + writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR); - UHCCOMS |= 1; + writel(readl(UHCCOMS) | UHCHR_FHR, UHCCOMS); udelay(10); #if defined(CONFIG_CPU_MONAHANS) - UHCHR |= UHCHR_SSEP0; + writel(readl(UHCHR) | UHCHR_SSEP0, UHCHR); #endif #if defined(CONFIG_PXA27X) - UHCHR |= UHCHR_SSEP2; + writel(readl(UHCHR) | UHCHR_SSEP2, UHCHR); #endif - UHCHR |= UHCHR_SSEP1; - UHCHR |= UHCHR_SSE; - - return 0; -} - -int usb_cpu_init_fail(void) -{ - UHCHR |= UHCHR_FHR; - udelay(11); - UHCHR &= ~UHCHR_FHR; - - UHCCOMS |= 1; - udelay(10); + writel(readl(UHCHR) | UHCHR_SSEP1 | UHCHR_SSE, UHCHR); #if defined(CONFIG_CPU_MONAHANS) - UHCHR |= UHCHR_SSEP0; + /* Disable USB host clock. */ + writel(readl(CKENA) & ~(CKENA_2_USBHOST | CKENA_20_UDC), CKENA); + udelay(100); #endif #if defined(CONFIG_PXA27X) - UHCHR |= UHCHR_SSEP2; + /* Disable USB host clock. */ + writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN); #endif - UHCHR |= UHCHR_SSEP1; - UHCHR |= UHCHR_SSE; return 0; } +int usb_cpu_init_fail(void) +{ + return usb_cpu_stop(); +} + # endif /* defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X) */ #endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */ diff --git a/arch/arm/include/asm/arch-at91/hardware.h b/arch/arm/include/asm/arch-at91/hardware.h index 9f732a7..f5f80e0 100644 --- a/arch/arm/include/asm/arch-at91/hardware.h +++ b/arch/arm/include/asm/arch-at91/hardware.h @@ -18,6 +18,7 @@ #if defined(CONFIG_AT91RM9200) #include <asm/arch-at91/at91rm9200.h> +#define AT91_PMC_UHP AT91RM9200_PMC_UHP #elif defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9G20) #include <asm/arch/at91sam9260.h> #define AT91_BASE_MCI AT91SAM9260_BASE_MCI diff --git a/arch/arm/include/asm/arch-mx51/asm-offsets.h b/arch/arm/include/asm/arch-mx5/asm-offsets.h index afd2728..afd2728 100644 --- a/arch/arm/include/asm/arch-mx51/asm-offsets.h +++ b/arch/arm/include/asm/arch-mx5/asm-offsets.h diff --git a/arch/arm/include/asm/arch-mx51/clock.h b/arch/arm/include/asm/arch-mx5/clock.h index 1f8a537..1f8a537 100644 --- a/arch/arm/include/asm/arch-mx51/clock.h +++ b/arch/arm/include/asm/arch-mx5/clock.h diff --git a/arch/arm/include/asm/arch-mx51/crm_regs.h b/arch/arm/include/asm/arch-mx5/crm_regs.h index 14aa231..14aa231 100644 --- a/arch/arm/include/asm/arch-mx51/crm_regs.h +++ b/arch/arm/include/asm/arch-mx5/crm_regs.h diff --git a/arch/arm/include/asm/arch-mx51/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h index 3ddda40..3ddda40 100644 --- a/arch/arm/include/asm/arch-mx51/imx-regs.h +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h diff --git a/arch/arm/include/asm/arch-mx51/iomux.h b/arch/arm/include/asm/arch-mx5/iomux.h index a41c387..0d91a24 100644 --- a/arch/arm/include/asm/arch-mx51/iomux.h +++ b/arch/arm/include/asm/arch-mx5/iomux.h @@ -20,13 +20,13 @@ * MA 02111-1307 USA */ -#ifndef __MACH_MX51_IOMUX_H__ -#define __MACH_MX51_IOMUX_H__ +#ifndef __MACH_MX5_IOMUX_H__ +#define __MACH_MX5_IOMUX_H__ #include <common.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/mx51_pins.h> +#include <asm/arch/mx5x_pins.h> typedef unsigned int iomux_pin_name_t; @@ -190,4 +190,4 @@ void mxc_iomux_set_pad(iomux_pin_name_t pin, u32 config); unsigned int mxc_iomux_get_pad(iomux_pin_name_t pin); void mxc_iomux_set_input(iomux_input_select_t input, u32 config); -#endif /* __MACH_MX51_IOMUX_H__ */ +#endif /* __MACH_MX5_IOMUX_H__ */ diff --git a/arch/arm/include/asm/arch-mx51/mx51_pins.h b/arch/arm/include/asm/arch-mx5/mx5x_pins.h index b44ff25..a564fce 100644 --- a/arch/arm/include/asm/arch-mx51/mx51_pins.h +++ b/arch/arm/include/asm/arch-mx5/mx5x_pins.h @@ -20,8 +20,8 @@ * MA 02111-1307 USA */ -#ifndef __ASM_ARCH_MXC_MX51_PINS_H__ -#define __ASM_ARCH_MXC_MX51_PINS_H__ +#ifndef __ASM_ARCH_MX5_MX5X_PINS_H__ +#define __ASM_ARCH_MX5_MX5X_PINS_H__ #ifndef __ASSEMBLY__ @@ -415,4 +415,4 @@ enum iomux_pins { }; #endif /* __ASSEMBLY__ */ -#endif /* __ASM_ARCH_MXC_MX51_PINS_H__ */ +#endif /* __ASM_ARCH_MX5_MX5X_PINS_H__ */ diff --git a/arch/arm/include/asm/arch-mx51/sys_proto.h b/arch/arm/include/asm/arch-mx5/sys_proto.h index f687503..f687503 100644 --- a/arch/arm/include/asm/arch-mx51/sys_proto.h +++ b/arch/arm/include/asm/arch-mx5/sys_proto.h diff --git a/arch/arm/include/asm/arch-pxa/hardware.h b/arch/arm/include/asm/arch-pxa/hardware.h index c8c479a..44b800f 100644 --- a/arch/arm/include/asm/arch-pxa/hardware.h +++ b/arch/arm/include/asm/arch-pxa/hardware.h @@ -21,6 +21,19 @@ #include <linux/config.h> #include <asm/mach-types.h> +/* + * Define CONFIG_CPU_MONAHANS in case some CPU of the PXA3xx family is selected. + * PXA300/310/320 all have distinct register mappings in some cases, that's why + * the exact CPU has to be selected. CONFIG_CPU_MONAHANS is a helper for common + * drivers and compatibility glue with old source then. + */ +#ifndef CONFIG_CPU_MONAHANS +#if defined(CONFIG_CPU_PXA300) || \ + defined(CONFIG_CPU_PXA310) || \ + defined(CONFIG_CPU_PXA320) +#define CONFIG_CPU_MONAHANS +#endif +#endif /* * These are statically mapped PCMCIA IO space for designs using it as a @@ -51,54 +64,6 @@ * 0x48000000 - 0x49ffffff <--> 0xfc000000 - 0xfdffffff */ -/* FIXME: Only this does work for u-boot... find out why... [RS] */ -#define UBOOT_REG_FIX 1 - -#ifndef UBOOT_REG_FIX -#ifndef __ASSEMBLY__ - -#define io_p2v(x) ( ((x) | 0xbe000000) ^ (~((x) >> 1) & 0x06000000) ) -#define io_v2p( x ) ( ((x) & 0x41ffffff) ^ ( ((x) & 0x06000000) << 1) ) - -/* - * This __REG() version gives the same results as the one above, except - * that we are fooling gcc somehow so it generates far better and smaller - * assembly code for access to contigous registers. It's a shame that gcc - * doesn't guess this by itself. - */ -#include <asm/types.h> -typedef struct { volatile u32 offset[4096]; } __regbase; -# define __REGP(x) ((__regbase *)((x)&~4095))->offset[((x)&4095)>>2] -# define __REG(x) __REGP(io_p2v(x)) -#endif - -/* Let's kick gcc's ass again... */ -# define __REG2(x,y) \ - ( __builtin_constant_p(y) ? (__REG((x) + (y))) \ - : (*(volatile u32 *)((u32)&__REG(x) + (y))) ) - -# define __PREG(x) (io_v2p((u32)&(x))) - -#else - -# define __REG(x) io_p2v(x) -# define __PREG(x) io_v2p(x) - -# undef io_p2v -# undef __REG -# ifndef __ASSEMBLY__ -# define io_p2v(PhAdd) (PhAdd) -# define __REG(x) (*((volatile u32 *)io_p2v(x))) -# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y))) -# else -# define __REG(x) (x) -# ifdef CONFIG_CPU_MONAHANS /* Hack to make this work with mona's pxa-regs.h */ -# define __REG_2(x) (x) -# define __REG_3(x) (x) -# endif -# endif -#endif /* UBOOT_REG_FIX */ - #include "pxa-regs.h" #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/arch-pxa/macro.h b/arch/arm/include/asm/arch-pxa/macro.h index 035a57e..85958dd 100644 --- a/arch/arm/include/asm/arch-pxa/macro.h +++ b/arch/arm/include/asm/arch-pxa/macro.h @@ -102,7 +102,11 @@ /* * This macro sets up the Memory controller of the PXA2xx CPU * - * Clobbered regs: r3, r4, r5 + * WARNING: This macro uses internally r3 and r7 regs for MEMC_BASE + * and CONFIG_SYS_MDREFR_VAL correspondingly. Please do not + * use this regs for other purpose inside this macro. + * + * Clobbered regs: r3, r4, r5, r6, r7 */ .macro pxa_mem_setup /* This comes handy when setting MDREFR */ @@ -157,7 +161,7 @@ bic r5, r5, #0xf00 /* MDREFR user config with zeroed DRI */ ldr r4, =CONFIG_SYS_MDREFR_VAL - mov r6, r4 + mov r7, r4 lsl r4, #20 lsr r4, #20 /* Get a valid DRI field */ @@ -187,12 +191,12 @@ * 6) Initialize SDRAM */ - bic r6, #MDREFR_SLFRSH - str r6, [r3, #MDREFR_OFFSET] + bic r7, #MDREFR_SLFRSH + str r7, [r3, #MDREFR_OFFSET] ldr r4, [r3, #MDREFR_OFFSET] - orr r6, #MDREFR_E1PIN - str r6, [r3, #MDREFR_OFFSET] + orr r7, #MDREFR_E1PIN + str r7, [r3, #MDREFR_OFFSET] ldr r4, [r3, #MDREFR_OFFSET] /* @@ -250,8 +254,8 @@ */ ldr r4, [r3, #MDREFR_OFFSET] - and r6, r6, #MDREFR_APD - orr r4, r4, r6 + and r7, r7, #MDREFR_APD + orr r4, r4, r7 str r4, [r3, #MDREFR_OFFSET] ldr r4, [r3, #MDREFR_OFFSET] .endm diff --git a/arch/arm/include/asm/arch-pxa/pxa-regs.h b/arch/arm/include/asm/arch-pxa/pxa-regs.h index d442fb0..65a387f 100644 --- a/arch/arm/include/asm/arch-pxa/pxa-regs.h +++ b/arch/arm/include/asm/arch-pxa/pxa-regs.h @@ -93,42 +93,42 @@ typedef void (*ExcpHndlr) (void) ; /* * DMA Controller */ -#define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */ -#define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */ -#define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */ -#define DCSR3 __REG(0x4000000c) /* DMA Control / Status Register for Channel 3 */ -#define DCSR4 __REG(0x40000010) /* DMA Control / Status Register for Channel 4 */ -#define DCSR5 __REG(0x40000014) /* DMA Control / Status Register for Channel 5 */ -#define DCSR6 __REG(0x40000018) /* DMA Control / Status Register for Channel 6 */ -#define DCSR7 __REG(0x4000001c) /* DMA Control / Status Register for Channel 7 */ -#define DCSR8 __REG(0x40000020) /* DMA Control / Status Register for Channel 8 */ -#define DCSR9 __REG(0x40000024) /* DMA Control / Status Register for Channel 9 */ -#define DCSR10 __REG(0x40000028) /* DMA Control / Status Register for Channel 10 */ -#define DCSR11 __REG(0x4000002c) /* DMA Control / Status Register for Channel 11 */ -#define DCSR12 __REG(0x40000030) /* DMA Control / Status Register for Channel 12 */ -#define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */ -#define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */ -#define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */ -#ifdef CONFIG_CPU_MONAHANS -#define DCSR16 __REG(0x40000040) /* DMA Control / Status Register for Channel 16 */ -#define DCSR17 __REG(0x40000044) /* DMA Control / Status Register for Channel 17 */ -#define DCSR18 __REG(0x40000048) /* DMA Control / Status Register for Channel 18 */ -#define DCSR19 __REG(0x4000004c) /* DMA Control / Status Register for Channel 19 */ -#define DCSR20 __REG(0x40000050) /* DMA Control / Status Register for Channel 20 */ -#define DCSR21 __REG(0x40000054) /* DMA Control / Status Register for Channel 21 */ -#define DCSR22 __REG(0x40000058) /* DMA Control / Status Register for Channel 22 */ -#define DCSR23 __REG(0x4000005c) /* DMA Control / Status Register for Channel 23 */ -#define DCSR24 __REG(0x40000060) /* DMA Control / Status Register for Channel 24 */ -#define DCSR25 __REG(0x40000064) /* DMA Control / Status Register for Channel 25 */ -#define DCSR26 __REG(0x40000068) /* DMA Control / Status Register for Channel 26 */ -#define DCSR27 __REG(0x4000006c) /* DMA Control / Status Register for Channel 27 */ -#define DCSR28 __REG(0x40000070) /* DMA Control / Status Register for Channel 28 */ -#define DCSR29 __REG(0x40000074) /* DMA Control / Status Register for Channel 29 */ -#define DCSR30 __REG(0x40000078) /* DMA Control / Status Register for Channel 30 */ -#define DCSR31 __REG(0x4000007c) /* DMA Control / Status Register for Channel 31 */ -#endif /* CONFIG_CPU_MONAHANS */ - -#define DCSR(x) __REG2(0x40000000, (x) << 2) +#define DCSR0 0x40000000 /* DMA Control / Status Register for Channel 0 */ +#define DCSR1 0x40000004 /* DMA Control / Status Register for Channel 1 */ +#define DCSR2 0x40000008 /* DMA Control / Status Register for Channel 2 */ +#define DCSR3 0x4000000c /* DMA Control / Status Register for Channel 3 */ +#define DCSR4 0x40000010 /* DMA Control / Status Register for Channel 4 */ +#define DCSR5 0x40000014 /* DMA Control / Status Register for Channel 5 */ +#define DCSR6 0x40000018 /* DMA Control / Status Register for Channel 6 */ +#define DCSR7 0x4000001c /* DMA Control / Status Register for Channel 7 */ +#define DCSR8 0x40000020 /* DMA Control / Status Register for Channel 8 */ +#define DCSR9 0x40000024 /* DMA Control / Status Register for Channel 9 */ +#define DCSR10 0x40000028 /* DMA Control / Status Register for Channel 10 */ +#define DCSR11 0x4000002c /* DMA Control / Status Register for Channel 11 */ +#define DCSR12 0x40000030 /* DMA Control / Status Register for Channel 12 */ +#define DCSR13 0x40000034 /* DMA Control / Status Register for Channel 13 */ +#define DCSR14 0x40000038 /* DMA Control / Status Register for Channel 14 */ +#define DCSR15 0x4000003c /* DMA Control / Status Register for Channel 15 */ +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) +#define DCSR16 0x40000040 /* DMA Control / Status Register for Channel 16 */ +#define DCSR17 0x40000044 /* DMA Control / Status Register for Channel 17 */ +#define DCSR18 0x40000048 /* DMA Control / Status Register for Channel 18 */ +#define DCSR19 0x4000004c /* DMA Control / Status Register for Channel 19 */ +#define DCSR20 0x40000050 /* DMA Control / Status Register for Channel 20 */ +#define DCSR21 0x40000054 /* DMA Control / Status Register for Channel 21 */ +#define DCSR22 0x40000058 /* DMA Control / Status Register for Channel 22 */ +#define DCSR23 0x4000005c /* DMA Control / Status Register for Channel 23 */ +#define DCSR24 0x40000060 /* DMA Control / Status Register for Channel 24 */ +#define DCSR25 0x40000064 /* DMA Control / Status Register for Channel 25 */ +#define DCSR26 0x40000068 /* DMA Control / Status Register for Channel 26 */ +#define DCSR27 0x4000006c /* DMA Control / Status Register for Channel 27 */ +#define DCSR28 0x40000070 /* DMA Control / Status Register for Channel 28 */ +#define DCSR29 0x40000074 /* DMA Control / Status Register for Channel 29 */ +#define DCSR30 0x40000078 /* DMA Control / Status Register for Channel 30 */ +#define DCSR31 0x4000007c /* DMA Control / Status Register for Channel 31 */ +#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */ + +#define DCSR(x) (0x40000000 | ((x) << 2)) #define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ #define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ @@ -150,52 +150,52 @@ typedef void (*ExcpHndlr) (void) ; #define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */ #define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */ -#define DINT __REG(0x400000f0) /* DMA Interrupt Register */ - -#define DRCMR0 __REG(0x40000100) /* Request to Channel Map Register for DREQ 0 */ -#define DRCMR1 __REG(0x40000104) /* Request to Channel Map Register for DREQ 1 */ -#define DRCMR2 __REG(0x40000108) /* Request to Channel Map Register for I2S receive Request */ -#define DRCMR3 __REG(0x4000010c) /* Request to Channel Map Register for I2S transmit Request */ -#define DRCMR4 __REG(0x40000110) /* Request to Channel Map Register for BTUART receive Request */ -#define DRCMR5 __REG(0x40000114) /* Request to Channel Map Register for BTUART transmit Request. */ -#define DRCMR6 __REG(0x40000118) /* Request to Channel Map Register for FFUART receive Request */ -#define DRCMR7 __REG(0x4000011c) /* Request to Channel Map Register for FFUART transmit Request */ -#define DRCMR8 __REG(0x40000120) /* Request to Channel Map Register for AC97 microphone Request */ -#define DRCMR9 __REG(0x40000124) /* Request to Channel Map Register for AC97 modem receive Request */ -#define DRCMR10 __REG(0x40000128) /* Request to Channel Map Register for AC97 modem transmit Request */ -#define DRCMR11 __REG(0x4000012c) /* Request to Channel Map Register for AC97 audio receive Request */ -#define DRCMR12 __REG(0x40000130) /* Request to Channel Map Register for AC97 audio transmit Request */ -#define DRCMR13 __REG(0x40000134) /* Request to Channel Map Register for SSP receive Request */ -#define DRCMR14 __REG(0x40000138) /* Request to Channel Map Register for SSP transmit Request */ -#define DRCMR15 __REG(0x4000013c) /* Reserved */ -#define DRCMR16 __REG(0x40000140) /* Reserved */ -#define DRCMR17 __REG(0x40000144) /* Request to Channel Map Register for ICP receive Request */ -#define DRCMR18 __REG(0x40000148) /* Request to Channel Map Register for ICP transmit Request */ -#define DRCMR19 __REG(0x4000014c) /* Request to Channel Map Register for STUART receive Request */ -#define DRCMR20 __REG(0x40000150) /* Request to Channel Map Register for STUART transmit Request */ -#define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC receive Request */ -#define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC transmit Request */ -#define DRCMR23 __REG(0x4000015c) /* Reserved */ -#define DRCMR24 __REG(0x40000160) /* Reserved */ -#define DRCMR25 __REG(0x40000164) /* Request to Channel Map Register for USB endpoint 1 Request */ -#define DRCMR26 __REG(0x40000168) /* Request to Channel Map Register for USB endpoint 2 Request */ -#define DRCMR27 __REG(0x4000016C) /* Request to Channel Map Register for USB endpoint 3 Request */ -#define DRCMR28 __REG(0x40000170) /* Request to Channel Map Register for USB endpoint 4 Request */ -#define DRCMR29 __REG(0x40000174) /* Reserved */ -#define DRCMR30 __REG(0x40000178) /* Request to Channel Map Register for USB endpoint 6 Request */ -#define DRCMR31 __REG(0x4000017C) /* Request to Channel Map Register for USB endpoint 7 Request */ -#define DRCMR32 __REG(0x40000180) /* Request to Channel Map Register for USB endpoint 8 Request */ -#define DRCMR33 __REG(0x40000184) /* Request to Channel Map Register for USB endpoint 9 Request */ -#define DRCMR34 __REG(0x40000188) /* Reserved */ -#define DRCMR35 __REG(0x4000018C) /* Request to Channel Map Register for USB endpoint 11 Request */ -#define DRCMR36 __REG(0x40000190) /* Request to Channel Map Register for USB endpoint 12 Request */ -#define DRCMR37 __REG(0x40000194) /* Request to Channel Map Register for USB endpoint 13 Request */ -#define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */ -#define DRCMR39 __REG(0x4000019C) /* Reserved */ - -#define DRCMR68 __REG(0x40001110) /* Request to Channel Map Register for Camera FIFO 0 Request */ -#define DRCMR69 __REG(0x40001114) /* Request to Channel Map Register for Camera FIFO 1 Request */ -#define DRCMR70 __REG(0x40001118) /* Request to Channel Map Register for Camera FIFO 2 Request */ +#define DINT 0x400000f0 /* DMA Interrupt Register */ + +#define DRCMR0 0x40000100 /* Request to Channel Map Register for DREQ 0 */ +#define DRCMR1 0x40000104 /* Request to Channel Map Register for DREQ 1 */ +#define DRCMR2 0x40000108 /* Request to Channel Map Register for I2S receive Request */ +#define DRCMR3 0x4000010c /* Request to Channel Map Register for I2S transmit Request */ +#define DRCMR4 0x40000110 /* Request to Channel Map Register for BTUART receive Request */ +#define DRCMR5 0x40000114 /* Request to Channel Map Register for BTUART transmit Request. */ +#define DRCMR6 0x40000118 /* Request to Channel Map Register for FFUART receive Request */ +#define DRCMR7 0x4000011c /* Request to Channel Map Register for FFUART transmit Request */ +#define DRCMR8 0x40000120 /* Request to Channel Map Register for AC97 microphone Request */ +#define DRCMR9 0x40000124 /* Request to Channel Map Register for AC97 modem receive Request */ +#define DRCMR10 0x40000128 /* Request to Channel Map Register for AC97 modem transmit Request */ +#define DRCMR11 0x4000012c /* Request to Channel Map Register for AC97 audio receive Request */ +#define DRCMR12 0x40000130 /* Request to Channel Map Register for AC97 audio transmit Request */ +#define DRCMR13 0x40000134 /* Request to Channel Map Register for SSP receive Request */ +#define DRCMR14 0x40000138 /* Request to Channel Map Register for SSP transmit Request */ +#define DRCMR15 0x4000013c /* Reserved */ +#define DRCMR16 0x40000140 /* Reserved */ +#define DRCMR17 0x40000144 /* Request to Channel Map Register for ICP receive Request */ +#define DRCMR18 0x40000148 /* Request to Channel Map Register for ICP transmit Request */ +#define DRCMR19 0x4000014c /* Request to Channel Map Register for STUART receive Request */ +#define DRCMR20 0x40000150 /* Request to Channel Map Register for STUART transmit Request */ +#define DRCMR21 0x40000154 /* Request to Channel Map Register for MMC receive Request */ +#define DRCMR22 0x40000158 /* Request to Channel Map Register for MMC transmit Request */ +#define DRCMR23 0x4000015c /* Reserved */ +#define DRCMR24 0x40000160 /* Reserved */ +#define DRCMR25 0x40000164 /* Request to Channel Map Register for USB endpoint 1 Request */ +#define DRCMR26 0x40000168 /* Request to Channel Map Register for USB endpoint 2 Request */ +#define DRCMR27 0x4000016C /* Request to Channel Map Register for USB endpoint 3 Request */ +#define DRCMR28 0x40000170 /* Request to Channel Map Register for USB endpoint 4 Request */ +#define DRCMR29 0x40000174 /* Reserved */ +#define DRCMR30 0x40000178 /* Request to Channel Map Register for USB endpoint 6 Request */ +#define DRCMR31 0x4000017C /* Request to Channel Map Register for USB endpoint 7 Request */ +#define DRCMR32 0x40000180 /* Request to Channel Map Register for USB endpoint 8 Request */ +#define DRCMR33 0x40000184 /* Request to Channel Map Register for USB endpoint 9 Request */ +#define DRCMR34 0x40000188 /* Reserved */ +#define DRCMR35 0x4000018C /* Request to Channel Map Register for USB endpoint 11 Request */ +#define DRCMR36 0x40000190 /* Request to Channel Map Register for USB endpoint 12 Request */ +#define DRCMR37 0x40000194 /* Request to Channel Map Register for USB endpoint 13 Request */ +#define DRCMR38 0x40000198 /* Request to Channel Map Register for USB endpoint 14 Request */ +#define DRCMR39 0x4000019C /* Reserved */ + +#define DRCMR68 0x40001110 /* Request to Channel Map Register for Camera FIFO 0 Request */ +#define DRCMR69 0x40001114 /* Request to Channel Map Register for Camera FIFO 1 Request */ +#define DRCMR70 0x40001118 /* Request to Channel Map Register for Camera FIFO 2 Request */ #define DRCMRRXSADR DRCMR2 #define DRCMRTXSADR DRCMR3 @@ -220,75 +220,75 @@ typedef void (*ExcpHndlr) (void) ; #define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */ #define DRCMR_CHLNUM 0x0f /* mask for Channel Number (read / write) */ -#define DDADR0 __REG(0x40000200) /* DMA Descriptor Address Register Channel 0 */ -#define DSADR0 __REG(0x40000204) /* DMA Source Address Register Channel 0 */ -#define DTADR0 __REG(0x40000208) /* DMA Target Address Register Channel 0 */ -#define DCMD0 __REG(0x4000020c) /* DMA Command Address Register Channel 0 */ -#define DDADR1 __REG(0x40000210) /* DMA Descriptor Address Register Channel 1 */ -#define DSADR1 __REG(0x40000214) /* DMA Source Address Register Channel 1 */ -#define DTADR1 __REG(0x40000218) /* DMA Target Address Register Channel 1 */ -#define DCMD1 __REG(0x4000021c) /* DMA Command Address Register Channel 1 */ -#define DDADR2 __REG(0x40000220) /* DMA Descriptor Address Register Channel 2 */ -#define DSADR2 __REG(0x40000224) /* DMA Source Address Register Channel 2 */ -#define DTADR2 __REG(0x40000228) /* DMA Target Address Register Channel 2 */ -#define DCMD2 __REG(0x4000022c) /* DMA Command Address Register Channel 2 */ -#define DDADR3 __REG(0x40000230) /* DMA Descriptor Address Register Channel 3 */ -#define DSADR3 __REG(0x40000234) /* DMA Source Address Register Channel 3 */ -#define DTADR3 __REG(0x40000238) /* DMA Target Address Register Channel 3 */ -#define DCMD3 __REG(0x4000023c) /* DMA Command Address Register Channel 3 */ -#define DDADR4 __REG(0x40000240) /* DMA Descriptor Address Register Channel 4 */ -#define DSADR4 __REG(0x40000244) /* DMA Source Address Register Channel 4 */ -#define DTADR4 __REG(0x40000248) /* DMA Target Address Register Channel 4 */ -#define DCMD4 __REG(0x4000024c) /* DMA Command Address Register Channel 4 */ -#define DDADR5 __REG(0x40000250) /* DMA Descriptor Address Register Channel 5 */ -#define DSADR5 __REG(0x40000254) /* DMA Source Address Register Channel 5 */ -#define DTADR5 __REG(0x40000258) /* DMA Target Address Register Channel 5 */ -#define DCMD5 __REG(0x4000025c) /* DMA Command Address Register Channel 5 */ -#define DDADR6 __REG(0x40000260) /* DMA Descriptor Address Register Channel 6 */ -#define DSADR6 __REG(0x40000264) /* DMA Source Address Register Channel 6 */ -#define DTADR6 __REG(0x40000268) /* DMA Target Address Register Channel 6 */ -#define DCMD6 __REG(0x4000026c) /* DMA Command Address Register Channel 6 */ -#define DDADR7 __REG(0x40000270) /* DMA Descriptor Address Register Channel 7 */ -#define DSADR7 __REG(0x40000274) /* DMA Source Address Register Channel 7 */ -#define DTADR7 __REG(0x40000278) /* DMA Target Address Register Channel 7 */ -#define DCMD7 __REG(0x4000027c) /* DMA Command Address Register Channel 7 */ -#define DDADR8 __REG(0x40000280) /* DMA Descriptor Address Register Channel 8 */ -#define DSADR8 __REG(0x40000284) /* DMA Source Address Register Channel 8 */ -#define DTADR8 __REG(0x40000288) /* DMA Target Address Register Channel 8 */ -#define DCMD8 __REG(0x4000028c) /* DMA Command Address Register Channel 8 */ -#define DDADR9 __REG(0x40000290) /* DMA Descriptor Address Register Channel 9 */ -#define DSADR9 __REG(0x40000294) /* DMA Source Address Register Channel 9 */ -#define DTADR9 __REG(0x40000298) /* DMA Target Address Register Channel 9 */ -#define DCMD9 __REG(0x4000029c) /* DMA Command Address Register Channel 9 */ -#define DDADR10 __REG(0x400002a0) /* DMA Descriptor Address Register Channel 10 */ -#define DSADR10 __REG(0x400002a4) /* DMA Source Address Register Channel 10 */ -#define DTADR10 __REG(0x400002a8) /* DMA Target Address Register Channel 10 */ -#define DCMD10 __REG(0x400002ac) /* DMA Command Address Register Channel 10 */ -#define DDADR11 __REG(0x400002b0) /* DMA Descriptor Address Register Channel 11 */ -#define DSADR11 __REG(0x400002b4) /* DMA Source Address Register Channel 11 */ -#define DTADR11 __REG(0x400002b8) /* DMA Target Address Register Channel 11 */ -#define DCMD11 __REG(0x400002bc) /* DMA Command Address Register Channel 11 */ -#define DDADR12 __REG(0x400002c0) /* DMA Descriptor Address Register Channel 12 */ -#define DSADR12 __REG(0x400002c4) /* DMA Source Address Register Channel 12 */ -#define DTADR12 __REG(0x400002c8) /* DMA Target Address Register Channel 12 */ -#define DCMD12 __REG(0x400002cc) /* DMA Command Address Register Channel 12 */ -#define DDADR13 __REG(0x400002d0) /* DMA Descriptor Address Register Channel 13 */ -#define DSADR13 __REG(0x400002d4) /* DMA Source Address Register Channel 13 */ -#define DTADR13 __REG(0x400002d8) /* DMA Target Address Register Channel 13 */ -#define DCMD13 __REG(0x400002dc) /* DMA Command Address Register Channel 13 */ -#define DDADR14 __REG(0x400002e0) /* DMA Descriptor Address Register Channel 14 */ -#define DSADR14 __REG(0x400002e4) /* DMA Source Address Register Channel 14 */ -#define DTADR14 __REG(0x400002e8) /* DMA Target Address Register Channel 14 */ -#define DCMD14 __REG(0x400002ec) /* DMA Command Address Register Channel 14 */ -#define DDADR15 __REG(0x400002f0) /* DMA Descriptor Address Register Channel 15 */ -#define DSADR15 __REG(0x400002f4) /* DMA Source Address Register Channel 15 */ -#define DTADR15 __REG(0x400002f8) /* DMA Target Address Register Channel 15 */ -#define DCMD15 __REG(0x400002fc) /* DMA Command Address Register Channel 15 */ - -#define DDADR(x) __REG2(0x40000200, (x) << 4) -#define DSADR(x) __REG2(0x40000204, (x) << 4) -#define DTADR(x) __REG2(0x40000208, (x) << 4) -#define DCMD(x) __REG2(0x4000020c, (x) << 4) +#define DDADR0 0x40000200 /* DMA Descriptor Address Register Channel 0 */ +#define DSADR0 0x40000204 /* DMA Source Address Register Channel 0 */ +#define DTADR0 0x40000208 /* DMA Target Address Register Channel 0 */ +#define DCMD0 0x4000020c /* DMA Command Address Register Channel 0 */ +#define DDADR1 0x40000210 /* DMA Descriptor Address Register Channel 1 */ +#define DSADR1 0x40000214 /* DMA Source Address Register Channel 1 */ +#define DTADR1 0x40000218 /* DMA Target Address Register Channel 1 */ +#define DCMD1 0x4000021c /* DMA Command Address Register Channel 1 */ +#define DDADR2 0x40000220 /* DMA Descriptor Address Register Channel 2 */ +#define DSADR2 0x40000224 /* DMA Source Address Register Channel 2 */ +#define DTADR2 0x40000228 /* DMA Target Address Register Channel 2 */ +#define DCMD2 0x4000022c /* DMA Command Address Register Channel 2 */ +#define DDADR3 0x40000230 /* DMA Descriptor Address Register Channel 3 */ +#define DSADR3 0x40000234 /* DMA Source Address Register Channel 3 */ +#define DTADR3 0x40000238 /* DMA Target Address Register Channel 3 */ +#define DCMD3 0x4000023c /* DMA Command Address Register Channel 3 */ +#define DDADR4 0x40000240 /* DMA Descriptor Address Register Channel 4 */ +#define DSADR4 0x40000244 /* DMA Source Address Register Channel 4 */ +#define DTADR4 0x40000248 /* DMA Target Address Register Channel 4 */ +#define DCMD4 0x4000024c /* DMA Command Address Register Channel 4 */ +#define DDADR5 0x40000250 /* DMA Descriptor Address Register Channel 5 */ +#define DSADR5 0x40000254 /* DMA Source Address Register Channel 5 */ +#define DTADR5 0x40000258 /* DMA Target Address Register Channel 5 */ +#define DCMD5 0x4000025c /* DMA Command Address Register Channel 5 */ +#define DDADR6 0x40000260 /* DMA Descriptor Address Register Channel 6 */ +#define DSADR6 0x40000264 /* DMA Source Address Register Channel 6 */ +#define DTADR6 0x40000268 /* DMA Target Address Register Channel 6 */ +#define DCMD6 0x4000026c /* DMA Command Address Register Channel 6 */ +#define DDADR7 0x40000270 /* DMA Descriptor Address Register Channel 7 */ +#define DSADR7 0x40000274 /* DMA Source Address Register Channel 7 */ +#define DTADR7 0x40000278 /* DMA Target Address Register Channel 7 */ +#define DCMD7 0x4000027c /* DMA Command Address Register Channel 7 */ +#define DDADR8 0x40000280 /* DMA Descriptor Address Register Channel 8 */ +#define DSADR8 0x40000284 /* DMA Source Address Register Channel 8 */ +#define DTADR8 0x40000288 /* DMA Target Address Register Channel 8 */ +#define DCMD8 0x4000028c /* DMA Command Address Register Channel 8 */ +#define DDADR9 0x40000290 /* DMA Descriptor Address Register Channel 9 */ +#define DSADR9 0x40000294 /* DMA Source Address Register Channel 9 */ +#define DTADR9 0x40000298 /* DMA Target Address Register Channel 9 */ +#define DCMD9 0x4000029c /* DMA Command Address Register Channel 9 */ +#define DDADR10 0x400002a0 /* DMA Descriptor Address Register Channel 10 */ +#define DSADR10 0x400002a4 /* DMA Source Address Register Channel 10 */ +#define DTADR10 0x400002a8 /* DMA Target Address Register Channel 10 */ +#define DCMD10 0x400002ac /* DMA Command Address Register Channel 10 */ +#define DDADR11 0x400002b0 /* DMA Descriptor Address Register Channel 11 */ +#define DSADR11 0x400002b4 /* DMA Source Address Register Channel 11 */ +#define DTADR11 0x400002b8 /* DMA Target Address Register Channel 11 */ +#define DCMD11 0x400002bc /* DMA Command Address Register Channel 11 */ +#define DDADR12 0x400002c0 /* DMA Descriptor Address Register Channel 12 */ +#define DSADR12 0x400002c4 /* DMA Source Address Register Channel 12 */ +#define DTADR12 0x400002c8 /* DMA Target Address Register Channel 12 */ +#define DCMD12 0x400002cc /* DMA Command Address Register Channel 12 */ +#define DDADR13 0x400002d0 /* DMA Descriptor Address Register Channel 13 */ +#define DSADR13 0x400002d4 /* DMA Source Address Register Channel 13 */ +#define DTADR13 0x400002d8 /* DMA Target Address Register Channel 13 */ +#define DCMD13 0x400002dc /* DMA Command Address Register Channel 13 */ +#define DDADR14 0x400002e0 /* DMA Descriptor Address Register Channel 14 */ +#define DSADR14 0x400002e4 /* DMA Source Address Register Channel 14 */ +#define DTADR14 0x400002e8 /* DMA Target Address Register Channel 14 */ +#define DCMD14 0x400002ec /* DMA Command Address Register Channel 14 */ +#define DDADR15 0x400002f0 /* DMA Descriptor Address Register Channel 15 */ +#define DSADR15 0x400002f4 /* DMA Source Address Register Channel 15 */ +#define DTADR15 0x400002f8 /* DMA Target Address Register Channel 15 */ +#define DCMD15 0x400002fc /* DMA Command Address Register Channel 15 */ + +#define DDADR(x) (0x40000200 | ((x) << 4)) +#define DSADR(x) (0x40000204 | ((x) << 4)) +#define DTADR(x) (0x40000208 | ((x) << 4)) +#define DCMD(x) (0x4000020c | ((x) << 4)) #define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */ #define DDADR_STOP (1 << 0) /* Stop (read / write) */ @@ -313,56 +313,57 @@ typedef void (*ExcpHndlr) (void) ; #define DCMD_RXMCDR (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4) #define DCMD_TXPCDR (DCMD_INCSRCADDR|DCMD_FLOWTRG|DCMD_BURST32|DCMD_WIDTH4) +/******************************************************************************/ /* * UARTs */ /* Full Function UART (FFUART) */ #define FFUART FFRBR -#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */ -#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */ -#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */ -#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */ -#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */ -#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */ -#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */ -#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */ -#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */ -#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */ -#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */ -#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ -#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ +#define FFRBR 0x40100000 /* Receive Buffer Register (read only) */ +#define FFTHR 0x40100000 /* Transmit Holding Register (write only) */ +#define FFIER 0x40100004 /* Interrupt Enable Register (read/write) */ +#define FFIIR 0x40100008 /* Interrupt ID Register (read only) */ +#define FFFCR 0x40100008 /* FIFO Control Register (write only) */ +#define FFLCR 0x4010000C /* Line Control Register (read/write) */ +#define FFMCR 0x40100010 /* Modem Control Register (read/write) */ +#define FFLSR 0x40100014 /* Line Status Register (read only) */ +#define FFMSR 0x40100018 /* Modem Status Register (read only) */ +#define FFSPR 0x4010001C /* Scratch Pad Register (read/write) */ +#define FFISR 0x40100020 /* Infrared Selection Register (read/write) */ +#define FFDLL 0x40100000 /* Divisor Latch Low Register (DLAB = 1) (read/write) */ +#define FFDLH 0x40100004 /* Divisor Latch High Register (DLAB = 1) (read/write) */ /* Bluetooth UART (BTUART) */ #define BTUART BTRBR -#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */ -#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */ -#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */ -#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */ -#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */ -#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */ -#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */ -#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */ -#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */ -#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */ -#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */ -#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ -#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ +#define BTRBR 0x40200000 /* Receive Buffer Register (read only) */ +#define BTTHR 0x40200000 /* Transmit Holding Register (write only) */ +#define BTIER 0x40200004 /* Interrupt Enable Register (read/write) */ +#define BTIIR 0x40200008 /* Interrupt ID Register (read only) */ +#define BTFCR 0x40200008 /* FIFO Control Register (write only) */ +#define BTLCR 0x4020000C /* Line Control Register (read/write) */ +#define BTMCR 0x40200010 /* Modem Control Register (read/write) */ +#define BTLSR 0x40200014 /* Line Status Register (read only) */ +#define BTMSR 0x40200018 /* Modem Status Register (read only) */ +#define BTSPR 0x4020001C /* Scratch Pad Register (read/write) */ +#define BTISR 0x40200020 /* Infrared Selection Register (read/write) */ +#define BTDLL 0x40200000 /* Divisor Latch Low Register (DLAB = 1) (read/write) */ +#define BTDLH 0x40200004 /* Divisor Latch High Register (DLAB = 1) (read/write) */ /* Standard UART (STUART) */ #define STUART STRBR -#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */ -#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */ -#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */ -#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */ -#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */ -#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */ -#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */ -#define STLSR __REG(0x40700014) /* Line Status Register (read only) */ -#define STMSR __REG(0x40700018) /* Reserved */ -#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */ -#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */ -#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ -#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ +#define STRBR 0x40700000 /* Receive Buffer Register (read only) */ +#define STTHR 0x40700000 /* Transmit Holding Register (write only) */ +#define STIER 0x40700004 /* Interrupt Enable Register (read/write) */ +#define STIIR 0x40700008 /* Interrupt ID Register (read only) */ +#define STFCR 0x40700008 /* FIFO Control Register (write only) */ +#define STLCR 0x4070000C /* Line Control Register (read/write) */ +#define STMCR 0x40700010 /* Modem Control Register (read/write) */ +#define STLSR 0x40700014 /* Line Status Register (read only) */ +#define STMSR 0x40700018 /* Reserved */ +#define STSPR 0x4070001C /* Scratch Pad Register (read/write) */ +#define STISR 0x40700020 /* Infrared Selection Register (read/write) */ +#define STDLL 0x40700000 /* Divisor Latch Low Register (DLAB = 1) (read/write) */ +#define STDLH 0x40700004 /* Divisor Latch High Register (DLAB = 1) (read/write) */ #define IER_DMAE (1 << 7) /* DMA Requests Enable */ #define IER_UUE (1 << 6) /* UART Unit Enable */ @@ -408,7 +409,7 @@ typedef void (*ExcpHndlr) (void) ; #define LSR_OE (1 << 1) /* Overrun Error */ #define LSR_DR (1 << 0) /* Data Ready */ -#define MCR_LOOP (1 << 4) */ +#define MCR_LOOP (1 << 4) /* */ #define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */ #define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */ #define MCR_RTS (1 << 1) /* Request to Send */ @@ -423,6 +424,7 @@ typedef void (*ExcpHndlr) (void) ; #define MSR_DDSR (1 << 1) /* Delta Data Set Ready */ #define MSR_DCTS (1 << 0) /* Delta Clear To Send */ +/******************************************************************************/ /* * IrSR (Infrared Selection Register) */ @@ -456,17 +458,25 @@ typedef void (*ExcpHndlr) (void) ; /* * I2C registers */ -#define IBMR __REG(0x40301680) /* I2C Bus Monitor Register - IBMR */ -#define IDBR __REG(0x40301688) /* I2C Data Buffer Register - IDBR */ -#define ICR __REG(0x40301690) /* I2C Control Register - ICR */ -#define ISR __REG(0x40301698) /* I2C Status Register - ISR */ -#define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */ - -#define PWRIBMR __REG(0x40f00180) /* Power I2C Bus Monitor Register-IBMR */ -#define PWRIDBR __REG(0x40f00188) /* Power I2C Data Buffer Register-IDBR */ -#define PWRICR __REG(0x40f00190) /* Power I2C Control Register - ICR */ -#define PWRISR __REG(0x40f00198) /* Power I2C Status Register - ISR */ -#define PWRISAR __REG(0x40f001A0) /* Power I2C Slave Address Register-ISAR */ +#define IBMR 0x40301680 /* I2C Bus Monitor Register - IBMR */ +#define IDBR 0x40301688 /* I2C Data Buffer Register - IDBR */ +#define ICR 0x40301690 /* I2C Control Register - ICR */ +#define ISR 0x40301698 /* I2C Status Register - ISR */ +#define ISAR 0x403016A0 /* I2C Slave Address Register - ISAR */ + +#ifdef CONFIG_CPU_MONAHANS +#define PWRIBMR 0x40f500C0 /* Power I2C Bus Monitor Register-IBMR */ +#define PWRIDBR 0x40f500C4 /* Power I2C Data Buffer Register-IDBR */ +#define PWRICR 0x40f500C8 /* Power I2C Control Register - ICR */ +#define PWRISR 0x40f500CC /* Power I2C Status Register - ISR */ +#define PWRISAR 0x40f500D0 /* Power I2C Slave Address Register-ISAR */ +#else +#define PWRIBMR 0x40f00180 /* Power I2C Bus Monitor Register-IBMR */ +#define PWRIDBR 0x40f00188 /* Power I2C Data Buffer Register-IDBR */ +#define PWRICR 0x40f00190 /* Power I2C Control Register - ICR */ +#define PWRISR 0x40f00198 /* Power I2C Status Register - ISR */ +#define PWRISAR 0x40f001A0 /* Power I2C Slave Address Register-ISAR */ +#endif /* ----- Control register bits ---------------------------------------- */ @@ -507,28 +517,27 @@ typedef void (*ExcpHndlr) (void) ; /* FIXME the audio defines collide w/ the SA1111 defines. I don't like these * short defines because there is too much chance of namespace collision */ -/*#define SACR0 __REG(0x40400000) / Global Control Register */ -/*#define SACR1 __REG(0x40400004) / Serial Audio I 2 S/MSB-Justified Control Register */ -/*#define SASR0 __REG(0x4040000C) / Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ -/*#define SAIMR __REG(0x40400014) / Serial Audio Interrupt Mask Register */ -/*#define SAICR __REG(0x40400018) / Serial Audio Interrupt Clear Register */ -/*#define SADIV __REG(0x40400060) / Audio Clock Divider Register. */ -/*#define SADR __REG(0x40400080) / Serial Audio Data Register (TX and RX FIFO access Register). */ - +#define SACR0 0x40400000 /* Global Control Register */ +#define SACR1 0x40400004 /* Serial Audio I 2 S/MSB-Justified Control Register */ +#define SASR0 0x4040000C /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ +#define SAIMR 0x40400014 /* Serial Audio Interrupt Mask Register */ +#define SAICR 0x40400018 /* Serial Audio Interrupt Clear Register */ +#define SADIV 0x40400060 /* Audio Clock Divider Register. */ +#define SADR 0x40400080 /* Serial Audio Data Register (TX and RX FIFO access Register). */ /* * AC97 Controller registers */ -#define POCR __REG(0x40500000) /* PCM Out Control Register */ +#define POCR 0x40500000 /* PCM Out Control Register */ #define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ -#define PICR __REG(0x40500004) /* PCM In Control Register */ +#define PICR 0x40500004 /* PCM In Control Register */ #define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ -#define MCCR __REG(0x40500008) /* Mic In Control Register */ +#define MCCR 0x40500008 /* Mic In Control Register */ #define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ -#define GCR __REG(0x4050000C) /* Global Control Register */ +#define GCR 0x4050000C /* Global Control Register */ #define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */ #define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */ #define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */ @@ -540,16 +549,16 @@ typedef void (*ExcpHndlr) (void) ; #define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */ #define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */ -#define POSR __REG(0x40500010) /* PCM Out Status Register */ +#define POSR 0x40500010 /* PCM Out Status Register */ #define POSR_FIFOE (1 << 4) /* FIFO error */ -#define PISR __REG(0x40500014) /* PCM In Status Register */ +#define PISR 0x40500014 /* PCM In Status Register */ #define PISR_FIFOE (1 << 4) /* FIFO error */ -#define MCSR __REG(0x40500018) /* Mic In Status Register */ +#define MCSR 0x40500018 /* Mic In Status Register */ #define MCSR_FIFOE (1 << 4) /* FIFO error */ -#define GSR __REG(0x4050001C) /* Global Status Register */ +#define GSR 0x4050001C /* Global Status Register */ #define GSR_CDONE (1 << 19) /* Command Done */ #define GSR_SDONE (1 << 18) /* Status Done */ #define GSR_RDCS (1 << 15) /* Read Completion Status */ @@ -567,38 +576,38 @@ typedef void (*ExcpHndlr) (void) ; #define GSR_MIINT (1 << 1) /* Modem In Interrupt */ #define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */ -#define CAR __REG(0x40500020) /* CODEC Access Register */ +#define CAR 0x40500020 /* CODEC Access Register */ #define CAR_CAIP (1 << 0) /* Codec Access In Progress */ -#define PCDR __REG(0x40500040) /* PCM FIFO Data Register */ -#define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */ +#define PCDR 0x40500040 /* PCM FIFO Data Register */ +#define MCDR 0x40500060 /* Mic-in FIFO Data Register */ -#define MOCR __REG(0x40500100) /* Modem Out Control Register */ +#define MOCR 0x40500100 /* Modem Out Control Register */ #define MOCR_FEIE (1 << 3) /* FIFO Error */ -#define MICR __REG(0x40500108) /* Modem In Control Register */ +#define MICR 0x40500108 /* Modem In Control Register */ #define MICR_FEIE (1 << 3) /* FIFO Error */ -#define MOSR __REG(0x40500110) /* Modem Out Status Register */ +#define MOSR 0x40500110 /* Modem Out Status Register */ #define MOSR_FIFOE (1 << 4) /* FIFO error */ -#define MISR __REG(0x40500118) /* Modem In Status Register */ +#define MISR 0x40500118 /* Modem In Status Register */ #define MISR_FIFOE (1 << 4) /* FIFO error */ -#define MODR __REG(0x40500140) /* Modem FIFO Data Register */ +#define MODR 0x40500140 /* Modem FIFO Data Register */ -#define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */ -#define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */ -#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */ -#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */ +#define PAC_REG_BASE 0x40500200 /* Primary Audio Codec */ +#define SAC_REG_BASE 0x40500300 /* Secondary Audio Codec */ +#define PMC_REG_BASE 0x40500400 /* Primary Modem Codec */ +#define SMC_REG_BASE 0x40500500 /* Secondary Modem Codec */ /* * USB Device Controller */ -#ifdef CONFIG_PXA27X +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) -#define UDCCR __REG(0x40600000) /* UDC Control Register */ +#define UDCCR 0x40600000 /* UDC Control Register */ #define UDCCR_UDE (1 << 0) /* UDC enable */ #define UDCCR_UDA (1 << 1) /* UDC active */ #define UDCCR_RSM (1 << 2) /* Device resume */ @@ -623,7 +632,7 @@ typedef void (*ExcpHndlr) (void) ; #define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface Setting Number */ #define UDCCR_AAISN_S 5 -#define UDCCS0 __REG(0x40600100) /* UDC Endpoint 0 Control/Status Register */ +#define UDCCS0 0x40600100 /* UDC Endpoint 0 Control/Status Register */ #define UDCCS0_OPR (1 << 0) /* OUT packet ready */ #define UDCCS0_IPR (1 << 1) /* IN packet ready */ #define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */ @@ -634,9 +643,9 @@ typedef void (*ExcpHndlr) (void) ; #define UDCCS0_SA (1 << 7) /* Setup active */ /* Bulk IN - Endpoint 1,6,11 */ -#define UDCCS1 __REG(0x40600104) /* UDC Endpoint 1 (IN) Control/Status Register */ -#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */ -#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */ +#define UDCCS1 0x40600104 /* UDC Endpoint 1 (IN) Control/Status Register */ +#define UDCCS6 0x40600028 /* UDC Endpoint 6 (IN) Control/Status Register */ +#define UDCCS11 0x4060003C /* UDC Endpoint 11 (IN) Control/Status Register */ #define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */ #define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */ @@ -647,9 +656,9 @@ typedef void (*ExcpHndlr) (void) ; #define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */ /* Bulk OUT - Endpoint 2,7,12 */ -#define UDCCS2 __REG(0x40600108) /* UDC Endpoint 2 (OUT) Control/Status Register */ -#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */ -#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */ +#define UDCCS2 0x40600108 /* UDC Endpoint 2 (OUT) Control/Status Register */ +#define UDCCS7 0x4060002C /* UDC Endpoint 7 (OUT) Control/Status Register */ +#define UDCCS12 0x40600040 /* UDC Endpoint 12 (OUT) Control/Status Register */ #define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */ #define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */ @@ -660,9 +669,9 @@ typedef void (*ExcpHndlr) (void) ; #define UDCCS_BO_RSP (1 << 7) /* Receive short packet */ /* Isochronous IN - Endpoint 3,8,13 */ -#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */ -#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */ -#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */ +#define UDCCS3 0x4060001C /* UDC Endpoint 3 (IN) Control/Status Register */ +#define UDCCS8 0x40600030 /* UDC Endpoint 8 (IN) Control/Status Register */ +#define UDCCS13 0x40600044 /* UDC Endpoint 13 (IN) Control/Status Register */ #define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */ #define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */ @@ -671,9 +680,9 @@ typedef void (*ExcpHndlr) (void) ; #define UDCCS_II_TSP (1 << 7) /* Transmit short packet */ /* Isochronous OUT - Endpoint 4,9,14 */ -#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */ -#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */ -#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */ +#define UDCCS4 0x40600020 /* UDC Endpoint 4 (OUT) Control/Status Register */ +#define UDCCS9 0x40600034 /* UDC Endpoint 9 (OUT) Control/Status Register */ +#define UDCCS14 0x40600048 /* UDC Endpoint 14 (OUT) Control/Status Register */ #define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */ #define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */ @@ -683,9 +692,9 @@ typedef void (*ExcpHndlr) (void) ; #define UDCCS_IO_RSP (1 << 7) /* Receive short packet */ /* Interrupt IN - Endpoint 5,10,15 */ -#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */ -#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */ -#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */ +#define UDCCS5 0x40600024 /* UDC Endpoint 5 (Interrupt) Control/Status Register */ +#define UDCCS10 0x40600038 /* UDC Endpoint 10 (Interrupt) Control/Status Register */ +#define UDCCS15 0x4060004C /* UDC Endpoint 15 (Interrupt) Control/Status Register */ #define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */ #define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */ @@ -695,32 +704,32 @@ typedef void (*ExcpHndlr) (void) ; #define UDCCS_INT_FST (1 << 5) /* Force stall */ #define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */ -#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */ -#define UFNRL __REG(0x40600014) /* UDC Frame Number Register Low */ -#define UBCR2 __REG(0x40600208) /* UDC Byte Count Reg 2 */ -#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */ -#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */ -#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */ -#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */ -#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */ -#define UDDR0 __REG(0x40600300) /* UDC Endpoint 0 Data Register */ -#define UDDR1 __REG(0x40600304) /* UDC Endpoint 1 Data Register */ -#define UDDR2 __REG(0x40600308) /* UDC Endpoint 2 Data Register */ -#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */ -#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */ -#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */ -#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */ -#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */ -#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */ -#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */ -#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */ -#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */ -#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */ -#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */ -#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */ -#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */ - -#define UICR0 __REG(0x40600004) /* UDC Interrupt Control Register 0 */ +#define UFNRH 0x40600060 /* UDC Frame Number Register High */ +#define UFNRL 0x40600014 /* UDC Frame Number Register Low */ +#define UBCR2 0x40600208 /* UDC Byte Count Reg 2 */ +#define UBCR4 0x4060006c /* UDC Byte Count Reg 4 */ +#define UBCR7 0x40600070 /* UDC Byte Count Reg 7 */ +#define UBCR9 0x40600074 /* UDC Byte Count Reg 9 */ +#define UBCR12 0x40600078 /* UDC Byte Count Reg 12 */ +#define UBCR14 0x4060007c /* UDC Byte Count Reg 14 */ +#define UDDR0 0x40600300 /* UDC Endpoint 0 Data Register */ +#define UDDR1 0x40600304 /* UDC Endpoint 1 Data Register */ +#define UDDR2 0x40600308 /* UDC Endpoint 2 Data Register */ +#define UDDR3 0x40600200 /* UDC Endpoint 3 Data Register */ +#define UDDR4 0x40600400 /* UDC Endpoint 4 Data Register */ +#define UDDR5 0x406000A0 /* UDC Endpoint 5 Data Register */ +#define UDDR6 0x40600600 /* UDC Endpoint 6 Data Register */ +#define UDDR7 0x40600680 /* UDC Endpoint 7 Data Register */ +#define UDDR8 0x40600700 /* UDC Endpoint 8 Data Register */ +#define UDDR9 0x40600900 /* UDC Endpoint 9 Data Register */ +#define UDDR10 0x406000C0 /* UDC Endpoint 10 Data Register */ +#define UDDR11 0x40600B00 /* UDC Endpoint 11 Data Register */ +#define UDDR12 0x40600B80 /* UDC Endpoint 12 Data Register */ +#define UDDR13 0x40600C00 /* UDC Endpoint 13 Data Register */ +#define UDDR14 0x40600E00 /* UDC Endpoint 14 Data Register */ +#define UDDR15 0x406000E0 /* UDC Endpoint 15 Data Register */ + +#define UICR0 0x40600004 /* UDC Interrupt Control Register 0 */ #define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */ #define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */ @@ -731,7 +740,7 @@ typedef void (*ExcpHndlr) (void) ; #define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */ #define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */ -#define UICR1 __REG(0x40600008) /* UDC Interrupt Control Register 1 */ +#define UICR1 0x40600008 /* UDC Interrupt Control Register 1 */ #define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */ #define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */ @@ -742,7 +751,7 @@ typedef void (*ExcpHndlr) (void) ; #define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */ #define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */ -#define USIR0 __REG(0x4060000C) /* UDC Status Interrupt Register 0 */ +#define USIR0 0x4060000C /* UDC Status Interrupt Register 0 */ #define USIR0_IR0 (1 << 0) /* Interrup request ep 0 */ #define USIR0_IR1 (1 << 2) /* Interrup request ep 1 */ @@ -753,7 +762,7 @@ typedef void (*ExcpHndlr) (void) ; #define USIR0_IR6 (1 << 6) /* Interrup request ep 6 */ #define USIR0_IR7 (1 << 7) /* Interrup request ep 7 */ -#define USIR1 __REG(0x40600010) /* UDC Status Interrupt Register 1 */ +#define USIR1 0x40600010 /* UDC Status Interrupt Register 1 */ #define USIR1_IR8 (1 << 0) /* Interrup request ep 8 */ #define USIR1_IR9 (1 << 1) /* Interrup request ep 9 */ @@ -765,8 +774,8 @@ typedef void (*ExcpHndlr) (void) ; #define USIR1_IR15 (1 << 7) /* Interrup request ep 15 */ -#define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control Register0 */ -#define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control Register1 */ +#define UDCICR0 0x40600004 /* UDC Interrupt Control Register0 */ +#define UDCICR1 0x40600008 /* UDC Interrupt Control Register1 */ #define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */ #define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */ @@ -777,8 +786,8 @@ typedef void (*ExcpHndlr) (void) ; #define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */ #define UDCICR1_IERS (1 << 27) /* IntEn - Reset */ -#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */ -#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */ +#define UDCISR0 0x4060000C /* UDC Interrupt Status Register 0 */ +#define UDCISR1 0x40600010 /* UDC Interrupt Status Register 1 */ #define UDCISR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) #define UDCISR1_IRCC (1 << 31) /* IntEn - Configuration Change */ #define UDCISR1_IRSOF (1 << 30) /* IntEn - Start of Frame */ @@ -787,8 +796,8 @@ typedef void (*ExcpHndlr) (void) ; #define UDCISR1_IRRS (1 << 27) /* IntEn - Reset */ -#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */ -#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */ +#define UDCFNR 0x40600014 /* UDC Frame Number Register */ +#define UDCOTGICR 0x40600018 /* UDC On-The-Go interrupt control */ #define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */ #define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt Rising Edge Interrupt Enable */ #define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt Falling Edge Interrupt Enable */ @@ -804,7 +813,7 @@ typedef void (*ExcpHndlr) (void) ; #define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge Interrupt Enable */ #define UDCCSN(x) __REG2(0x40600100, (x) << 2) -#define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */ +#define UDCCSR0 0x40600100 /* UDC Control/Status register - Endpoint 0 */ #define UDCCSR0_SA (1 << 7) /* Setup Active */ #define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */ @@ -815,29 +824,29 @@ typedef void (*ExcpHndlr) (void) ; #define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */ #define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */ -#define UDCCSRA __REG(0x40600104) /* UDC Control/Status register - Endpoint A */ -#define UDCCSRB __REG(0x40600108) /* UDC Control/Status register - Endpoint B */ -#define UDCCSRC __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */ -#define UDCCSRD __REG(0x40600110) /* UDC Control/Status register - Endpoint D */ -#define UDCCSRE __REG(0x40600114) /* UDC Control/Status register - Endpoint E */ -#define UDCCSRF __REG(0x40600118) /* UDC Control/Status register - Endpoint F */ -#define UDCCSRG __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */ -#define UDCCSRH __REG(0x40600120) /* UDC Control/Status register - Endpoint H */ -#define UDCCSRI __REG(0x40600124) /* UDC Control/Status register - Endpoint I */ -#define UDCCSRJ __REG(0x40600128) /* UDC Control/Status register - Endpoint J */ -#define UDCCSRK __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */ -#define UDCCSRL __REG(0x40600130) /* UDC Control/Status register - Endpoint L */ -#define UDCCSRM __REG(0x40600134) /* UDC Control/Status register - Endpoint M */ -#define UDCCSRN __REG(0x40600138) /* UDC Control/Status register - Endpoint N */ -#define UDCCSRP __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */ -#define UDCCSRQ __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */ -#define UDCCSRR __REG(0x40600144) /* UDC Control/Status register - Endpoint R */ -#define UDCCSRS __REG(0x40600148) /* UDC Control/Status register - Endpoint S */ -#define UDCCSRT __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */ -#define UDCCSRU __REG(0x40600150) /* UDC Control/Status register - Endpoint U */ -#define UDCCSRV __REG(0x40600154) /* UDC Control/Status register - Endpoint V */ -#define UDCCSRW __REG(0x40600158) /* UDC Control/Status register - Endpoint W */ -#define UDCCSRX __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */ +#define UDCCSRA 0x40600104 /* UDC Control/Status register - Endpoint A */ +#define UDCCSRB 0x40600108 /* UDC Control/Status register - Endpoint B */ +#define UDCCSRC 0x4060010C /* UDC Control/Status register - Endpoint C */ +#define UDCCSRD 0x40600110 /* UDC Control/Status register - Endpoint D */ +#define UDCCSRE 0x40600114 /* UDC Control/Status register - Endpoint E */ +#define UDCCSRF 0x40600118 /* UDC Control/Status register - Endpoint F */ +#define UDCCSRG 0x4060011C /* UDC Control/Status register - Endpoint G */ +#define UDCCSRH 0x40600120 /* UDC Control/Status register - Endpoint H */ +#define UDCCSRI 0x40600124 /* UDC Control/Status register - Endpoint I */ +#define UDCCSRJ 0x40600128 /* UDC Control/Status register - Endpoint J */ +#define UDCCSRK 0x4060012C /* UDC Control/Status register - Endpoint K */ +#define UDCCSRL 0x40600130 /* UDC Control/Status register - Endpoint L */ +#define UDCCSRM 0x40600134 /* UDC Control/Status register - Endpoint M */ +#define UDCCSRN 0x40600138 /* UDC Control/Status register - Endpoint N */ +#define UDCCSRP 0x4060013C /* UDC Control/Status register - Endpoint P */ +#define UDCCSRQ 0x40600140 /* UDC Control/Status register - Endpoint Q */ +#define UDCCSRR 0x40600144 /* UDC Control/Status register - Endpoint R */ +#define UDCCSRS 0x40600148 /* UDC Control/Status register - Endpoint S */ +#define UDCCSRT 0x4060014C /* UDC Control/Status register - Endpoint T */ +#define UDCCSRU 0x40600150 /* UDC Control/Status register - Endpoint U */ +#define UDCCSRV 0x40600154 /* UDC Control/Status register - Endpoint V */ +#define UDCCSRW 0x40600158 /* UDC Control/Status register - Endpoint W */ +#define UDCCSRX 0x4060015C /* UDC Control/Status register - Endpoint X */ #define UDCCSR_DPE (1 << 9) /* Data Packet Error */ #define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */ @@ -852,81 +861,81 @@ typedef void (*ExcpHndlr) (void) ; #define UDCCSR_FS (1 << 0) /* FIFO needs service */ #define UDCBCN(x) __REG2(0x40600200, (x)<<2) -#define UDCBCR0 __REG(0x40600200) /* Byte Count Register - EP0 */ -#define UDCBCRA __REG(0x40600204) /* Byte Count Register - EPA */ -#define UDCBCRB __REG(0x40600208) /* Byte Count Register - EPB */ -#define UDCBCRC __REG(0x4060020C) /* Byte Count Register - EPC */ -#define UDCBCRD __REG(0x40600210) /* Byte Count Register - EPD */ -#define UDCBCRE __REG(0x40600214) /* Byte Count Register - EPE */ -#define UDCBCRF __REG(0x40600218) /* Byte Count Register - EPF */ -#define UDCBCRG __REG(0x4060021C) /* Byte Count Register - EPG */ -#define UDCBCRH __REG(0x40600220) /* Byte Count Register - EPH */ -#define UDCBCRI __REG(0x40600224) /* Byte Count Register - EPI */ -#define UDCBCRJ __REG(0x40600228) /* Byte Count Register - EPJ */ -#define UDCBCRK __REG(0x4060022C) /* Byte Count Register - EPK */ -#define UDCBCRL __REG(0x40600230) /* Byte Count Register - EPL */ -#define UDCBCRM __REG(0x40600234) /* Byte Count Register - EPM */ -#define UDCBCRN __REG(0x40600238) /* Byte Count Register - EPN */ -#define UDCBCRP __REG(0x4060023C) /* Byte Count Register - EPP */ -#define UDCBCRQ __REG(0x40600240) /* Byte Count Register - EPQ */ -#define UDCBCRR __REG(0x40600244) /* Byte Count Register - EPR */ -#define UDCBCRS __REG(0x40600248) /* Byte Count Register - EPS */ -#define UDCBCRT __REG(0x4060024C) /* Byte Count Register - EPT */ -#define UDCBCRU __REG(0x40600250) /* Byte Count Register - EPU */ -#define UDCBCRV __REG(0x40600254) /* Byte Count Register - EPV */ -#define UDCBCRW __REG(0x40600258) /* Byte Count Register - EPW */ -#define UDCBCRX __REG(0x4060025C) /* Byte Count Register - EPX */ +#define UDCBCR0 0x40600200 /* Byte Count Register - EP0 */ +#define UDCBCRA 0x40600204 /* Byte Count Register - EPA */ +#define UDCBCRB 0x40600208 /* Byte Count Register - EPB */ +#define UDCBCRC 0x4060020C /* Byte Count Register - EPC */ +#define UDCBCRD 0x40600210 /* Byte Count Register - EPD */ +#define UDCBCRE 0x40600214 /* Byte Count Register - EPE */ +#define UDCBCRF 0x40600218 /* Byte Count Register - EPF */ +#define UDCBCRG 0x4060021C /* Byte Count Register - EPG */ +#define UDCBCRH 0x40600220 /* Byte Count Register - EPH */ +#define UDCBCRI 0x40600224 /* Byte Count Register - EPI */ +#define UDCBCRJ 0x40600228 /* Byte Count Register - EPJ */ +#define UDCBCRK 0x4060022C /* Byte Count Register - EPK */ +#define UDCBCRL 0x40600230 /* Byte Count Register - EPL */ +#define UDCBCRM 0x40600234 /* Byte Count Register - EPM */ +#define UDCBCRN 0x40600238 /* Byte Count Register - EPN */ +#define UDCBCRP 0x4060023C /* Byte Count Register - EPP */ +#define UDCBCRQ 0x40600240 /* Byte Count Register - EPQ */ +#define UDCBCRR 0x40600244 /* Byte Count Register - EPR */ +#define UDCBCRS 0x40600248 /* Byte Count Register - EPS */ +#define UDCBCRT 0x4060024C /* Byte Count Register - EPT */ +#define UDCBCRU 0x40600250 /* Byte Count Register - EPU */ +#define UDCBCRV 0x40600254 /* Byte Count Register - EPV */ +#define UDCBCRW 0x40600258 /* Byte Count Register - EPW */ +#define UDCBCRX 0x4060025C /* Byte Count Register - EPX */ #define UDCDN(x) __REG2(0x40600300, (x)<<2) -#define UDCDR0 __REG(0x40600300) /* Data Register - EP0 */ -#define UDCDRA __REG(0x40600304) /* Data Register - EPA */ -#define UDCDRB __REG(0x40600308) /* Data Register - EPB */ -#define UDCDRC __REG(0x4060030C) /* Data Register - EPC */ -#define UDCDRD __REG(0x40600310) /* Data Register - EPD */ -#define UDCDRE __REG(0x40600314) /* Data Register - EPE */ -#define UDCDRF __REG(0x40600318) /* Data Register - EPF */ -#define UDCDRG __REG(0x4060031C) /* Data Register - EPG */ -#define UDCDRH __REG(0x40600320) /* Data Register - EPH */ -#define UDCDRI __REG(0x40600324) /* Data Register - EPI */ -#define UDCDRJ __REG(0x40600328) /* Data Register - EPJ */ -#define UDCDRK __REG(0x4060032C) /* Data Register - EPK */ -#define UDCDRL __REG(0x40600330) /* Data Register - EPL */ -#define UDCDRM __REG(0x40600334) /* Data Register - EPM */ -#define UDCDRN __REG(0x40600338) /* Data Register - EPN */ -#define UDCDRP __REG(0x4060033C) /* Data Register - EPP */ -#define UDCDRQ __REG(0x40600340) /* Data Register - EPQ */ -#define UDCDRR __REG(0x40600344) /* Data Register - EPR */ -#define UDCDRS __REG(0x40600348) /* Data Register - EPS */ -#define UDCDRT __REG(0x4060034C) /* Data Register - EPT */ -#define UDCDRU __REG(0x40600350) /* Data Register - EPU */ -#define UDCDRV __REG(0x40600354) /* Data Register - EPV */ -#define UDCDRW __REG(0x40600358) /* Data Register - EPW */ -#define UDCDRX __REG(0x4060035C) /* Data Register - EPX */ +#define UDCDR0 0x40600300 /* Data Register - EP0 */ +#define UDCDRA 0x40600304 /* Data Register - EPA */ +#define UDCDRB 0x40600308 /* Data Register - EPB */ +#define UDCDRC 0x4060030C /* Data Register - EPC */ +#define UDCDRD 0x40600310 /* Data Register - EPD */ +#define UDCDRE 0x40600314 /* Data Register - EPE */ +#define UDCDRF 0x40600318 /* Data Register - EPF */ +#define UDCDRG 0x4060031C /* Data Register - EPG */ +#define UDCDRH 0x40600320 /* Data Register - EPH */ +#define UDCDRI 0x40600324 /* Data Register - EPI */ +#define UDCDRJ 0x40600328 /* Data Register - EPJ */ +#define UDCDRK 0x4060032C /* Data Register - EPK */ +#define UDCDRL 0x40600330 /* Data Register - EPL */ +#define UDCDRM 0x40600334 /* Data Register - EPM */ +#define UDCDRN 0x40600338 /* Data Register - EPN */ +#define UDCDRP 0x4060033C /* Data Register - EPP */ +#define UDCDRQ 0x40600340 /* Data Register - EPQ */ +#define UDCDRR 0x40600344 /* Data Register - EPR */ +#define UDCDRS 0x40600348 /* Data Register - EPS */ +#define UDCDRT 0x4060034C /* Data Register - EPT */ +#define UDCDRU 0x40600350 /* Data Register - EPU */ +#define UDCDRV 0x40600354 /* Data Register - EPV */ +#define UDCDRW 0x40600358 /* Data Register - EPW */ +#define UDCDRX 0x4060035C /* Data Register - EPX */ #define UDCCN(x) __REG2(0x40600400, (x)<<2) -#define UDCCRA __REG(0x40600404) /* Configuration register EPA */ -#define UDCCRB __REG(0x40600408) /* Configuration register EPB */ -#define UDCCRC __REG(0x4060040C) /* Configuration register EPC */ -#define UDCCRD __REG(0x40600410) /* Configuration register EPD */ -#define UDCCRE __REG(0x40600414) /* Configuration register EPE */ -#define UDCCRF __REG(0x40600418) /* Configuration register EPF */ -#define UDCCRG __REG(0x4060041C) /* Configuration register EPG */ -#define UDCCRH __REG(0x40600420) /* Configuration register EPH */ -#define UDCCRI __REG(0x40600424) /* Configuration register EPI */ -#define UDCCRJ __REG(0x40600428) /* Configuration register EPJ */ -#define UDCCRK __REG(0x4060042C) /* Configuration register EPK */ -#define UDCCRL __REG(0x40600430) /* Configuration register EPL */ -#define UDCCRM __REG(0x40600434) /* Configuration register EPM */ -#define UDCCRN __REG(0x40600438) /* Configuration register EPN */ -#define UDCCRP __REG(0x4060043C) /* Configuration register EPP */ -#define UDCCRQ __REG(0x40600440) /* Configuration register EPQ */ -#define UDCCRR __REG(0x40600444) /* Configuration register EPR */ -#define UDCCRS __REG(0x40600448) /* Configuration register EPS */ -#define UDCCRT __REG(0x4060044C) /* Configuration register EPT */ -#define UDCCRU __REG(0x40600450) /* Configuration register EPU */ -#define UDCCRV __REG(0x40600454) /* Configuration register EPV */ -#define UDCCRW __REG(0x40600458) /* Configuration register EPW */ -#define UDCCRX __REG(0x4060045C) /* Configuration register EPX */ +#define UDCCRA 0x40600404 /* Configuration register EPA */ +#define UDCCRB 0x40600408 /* Configuration register EPB */ +#define UDCCRC 0x4060040C /* Configuration register EPC */ +#define UDCCRD 0x40600410 /* Configuration register EPD */ +#define UDCCRE 0x40600414 /* Configuration register EPE */ +#define UDCCRF 0x40600418 /* Configuration register EPF */ +#define UDCCRG 0x4060041C /* Configuration register EPG */ +#define UDCCRH 0x40600420 /* Configuration register EPH */ +#define UDCCRI 0x40600424 /* Configuration register EPI */ +#define UDCCRJ 0x40600428 /* Configuration register EPJ */ +#define UDCCRK 0x4060042C /* Configuration register EPK */ +#define UDCCRL 0x40600430 /* Configuration register EPL */ +#define UDCCRM 0x40600434 /* Configuration register EPM */ +#define UDCCRN 0x40600438 /* Configuration register EPN */ +#define UDCCRP 0x4060043C /* Configuration register EPP */ +#define UDCCRQ 0x40600440 /* Configuration register EPQ */ +#define UDCCRR 0x40600444 /* Configuration register EPR */ +#define UDCCRS 0x40600448 /* Configuration register EPS */ +#define UDCCRT 0x4060044C /* Configuration register EPT */ +#define UDCCRU 0x40600450 /* Configuration register EPU */ +#define UDCCRV 0x40600454 /* Configuration register EPV */ +#define UDCCRW 0x40600458 /* Configuration register EPW */ +#define UDCCRX 0x4060045C /* Configuration register EPX */ #define UDCCONR_CN (0x03 << 25) /* Configuration Number */ #define UDCCONR_CN_S (25) @@ -959,38 +968,39 @@ typedef void (*ExcpHndlr) (void) ; #if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) +/******************************************************************************/ /* * USB Host Controller */ #define OHCI_REGS_BASE 0x4C000000 /* required for ohci driver */ -#define UHCREV __REG(0x4C000000) -#define UHCHCON __REG(0x4C000004) -#define UHCCOMS __REG(0x4C000008) -#define UHCINTS __REG(0x4C00000C) -#define UHCINTE __REG(0x4C000010) -#define UHCINTD __REG(0x4C000014) -#define UHCHCCA __REG(0x4C000018) -#define UHCPCED __REG(0x4C00001C) -#define UHCCHED __REG(0x4C000020) -#define UHCCCED __REG(0x4C000024) -#define UHCBHED __REG(0x4C000028) -#define UHCBCED __REG(0x4C00002C) -#define UHCDHEAD __REG(0x4C000030) -#define UHCFMI __REG(0x4C000034) -#define UHCFMR __REG(0x4C000038) -#define UHCFMN __REG(0x4C00003C) -#define UHCPERS __REG(0x4C000040) -#define UHCLST __REG(0x4C000044) -#define UHCRHDA __REG(0x4C000048) -#define UHCRHDB __REG(0x4C00004C) -#define UHCRHS __REG(0x4C000050) -#define UHCRHPS1 __REG(0x4C000054) -#define UHCRHPS2 __REG(0x4C000058) -#define UHCRHPS3 __REG(0x4C00005C) -#define UHCSTAT __REG(0x4C000060) -#define UHCHR __REG(0x4C000064) -#define UHCHIE __REG(0x4C000068) -#define UHCHIT __REG(0x4C00006C) +#define UHCREV 0x4C000000 +#define UHCHCON 0x4C000004 +#define UHCCOMS 0x4C000008 +#define UHCINTS 0x4C00000C +#define UHCINTE 0x4C000010 +#define UHCINTD 0x4C000014 +#define UHCHCCA 0x4C000018 +#define UHCPCED 0x4C00001C +#define UHCCHED 0x4C000020 +#define UHCCCED 0x4C000024 +#define UHCBHED 0x4C000028 +#define UHCBCED 0x4C00002C +#define UHCDHEAD 0x4C000030 +#define UHCFMI 0x4C000034 +#define UHCFMR 0x4C000038 +#define UHCFMN 0x4C00003C +#define UHCPERS 0x4C000040 +#define UHCLST 0x4C000044 +#define UHCRHDA 0x4C000048 +#define UHCRHDB 0x4C00004C +#define UHCRHS 0x4C000050 +#define UHCRHPS1 0x4C000054 +#define UHCRHPS2 0x4C000058 +#define UHCRHPS3 0x4C00005C +#define UHCSTAT 0x4C000060 +#define UHCHR 0x4C000064 +#define UHCHIE 0x4C000068 +#define UHCHIT 0x4C00006C #define UHCHR_FSBIR (1<<0) #define UHCHR_FHR (1<<1) @@ -1011,9 +1021,7 @@ typedef void (*ExcpHndlr) (void) ; #define UHCHIE_HBAIE (1<<8) #define UHCHIE_RWIE (1<<7) -#if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X) -#define UP2OCR __REG(0x40600020) -#endif +#define UP2OCR 0x40600020 #define UP2OCR_HXOE (1<<17) #define UP2OCR_HXS (1<<16) @@ -1029,36 +1037,37 @@ typedef void (*ExcpHndlr) (void) ; #define UP2OCR_CPVPE (1<<1) #define UP2OCR_CPVEN (1<<0) -#endif +#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */ +/******************************************************************************/ /* * Fast Infrared Communication Port */ -#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */ -#define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */ -#define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */ -#define ICDR __REG(0x4080000c) /* ICP Data Register */ -#define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */ -#define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */ +#define ICCR0 0x40800000 /* ICP Control Register 0 */ +#define ICCR1 0x40800004 /* ICP Control Register 1 */ +#define ICCR2 0x40800008 /* ICP Control Register 2 */ +#define ICDR 0x4080000c /* ICP Data Register */ +#define ICSR0 0x40800014 /* ICP Status Register 0 */ +#define ICSR1 0x40800018 /* ICP Status Register 1 */ /* * Real Time Clock */ -#define RCNR __REG(0x40900000) /* RTC Count Register */ -#define RTAR __REG(0x40900004) /* RTC Alarm Register */ -#define RTSR __REG(0x40900008) /* RTC Status Register */ -#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */ -#define RDAR1 __REG(0x40900018) /* Wristwatch Day Alarm Reg 1 */ -#define RDAR2 __REG(0x40900020) /* Wristwatch Day Alarm Reg 2 */ -#define RYAR1 __REG(0x4090001C) /* Wristwatch Year Alarm Reg 1 */ -#define RYAR2 __REG(0x40900024) /* Wristwatch Year Alarm Reg 2 */ -#define SWAR1 __REG(0x4090002C) /* Stopwatch Alarm Register 1 */ -#define SWAR2 __REG(0x40900030) /* Stopwatch Alarm Register 2 */ -#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ -#define RDCR __REG(0x40900010) /* RTC Day Count Register. */ -#define RYCR __REG(0x40900014) /* RTC Year Count Register. */ -#define SWCR __REG(0x40900028) /* Stopwatch Count Register */ -#define RTCPICR __REG(0x40900034) /* Periodic Interrupt Counter Register */ +#define RCNR 0x40900000 /* RTC Count Register */ +#define RTAR 0x40900004 /* RTC Alarm Register */ +#define RTSR 0x40900008 /* RTC Status Register */ +#define RTTR 0x4090000C /* RTC Timer Trim Register */ +#define RDAR1 0x40900018 /* Wristwatch Day Alarm Reg 1 */ +#define RDAR2 0x40900020 /* Wristwatch Day Alarm Reg 2 */ +#define RYAR1 0x4090001C /* Wristwatch Year Alarm Reg 1 */ +#define RYAR2 0x40900024 /* Wristwatch Year Alarm Reg 2 */ +#define SWAR1 0x4090002C /* Stopwatch Alarm Register 1 */ +#define SWAR2 0x40900030 /* Stopwatch Alarm Register 2 */ +#define PIAR 0x40900038 /* Periodic Interrupt Alarm Register */ +#define RDCR 0x40900010 /* RTC Day Count Register. */ +#define RYCR 0x40900014 /* RTC Year Count Register. */ +#define SWCR 0x40900028 /* Stopwatch Count Register */ +#define RTCPICR 0x40900034 /* Periodic Interrupt Counter Register */ #define RTSR_PICE (1 << 15) /* Peridoc interrupt count enable */ #define RTSR_PIALE (1 << 14) /* Peridoc interrupt Alarm enable */ @@ -1068,48 +1077,48 @@ typedef void (*ExcpHndlr) (void) ; #define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ #define RTSR_AL (1 << 0) /* RTC alarm detected */ +/******************************************************************************/ /* * OS Timer & Match Registers */ -#define OSMR0 __REG(0x40A00000) /* OS Timer Match Register 0 */ -#define OSMR1 __REG(0x40A00004) /* OS Timer Match Register 1 */ -#define OSMR2 __REG(0x40A00008) /* OS Timer Match Register 2 */ -#define OSMR3 __REG(0x40A0000C) /* OS Timer Match Register 3 */ -#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */ -#define OSSR __REG(0x40A00014) /* OS Timer Status Register */ -#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */ -#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */ +#define OSMR0 0x40A00000 /* OS Timer Match Register 0 */ +#define OSMR1 0x40A00004 /* OS Timer Match Register 1 */ +#define OSMR2 0x40A00008 /* OS Timer Match Register 2 */ +#define OSMR3 0x40A0000C /* OS Timer Match Register 3 */ +#define OSCR 0x40A00010 /* OS Timer Counter Register */ +#define OSSR 0x40A00014 /* OS Timer Status Register */ +#define OWER 0x40A00018 /* OS Timer Watchdog Enable Register */ +#define OIER 0x40A0001C /* OS Timer Interrupt Enable Register */ -#ifdef CONFIG_CPU_MONAHANS -#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register 4 */ -#define OSCR5 __REG(0x40A00044) /* OS Timer Counter Register 5 */ -#define OSCR6 __REG(0x40A00048) /* OS Timer Counter Register 6 */ -#define OSCR7 __REG(0x40A0004C) /* OS Timer Counter Register 7 */ -#define OSCR8 __REG(0x40A00050) /* OS Timer Counter Register 8 */ -#define OSCR9 __REG(0x40A00054) /* OS Timer Counter Register 9 */ -#define OSCR10 __REG(0x40A00058) /* OS Timer Counter Register 10 */ -#define OSCR11 __REG(0x40A0005C) /* OS Timer Counter Register 11 */ - -#define OSMR4 __REG(0x40A00080) /* OS Timer Match Register 4 */ -#define OSMR5 __REG(0x40A00084) /* OS Timer Match Register 5 */ -#define OSMR6 __REG(0x40A00088) /* OS Timer Match Register 6 */ -#define OSMR7 __REG(0x40A0008C) /* OS Timer Match Register 7 */ -#define OSMR8 __REG(0x40A00090) /* OS Timer Match Register 8 */ -#define OSMR9 __REG(0x40A00094) /* OS Timer Match Register 9 */ -#define OSMR10 __REG(0x40A00098) /* OS Timer Match Register 10 */ -#define OSMR11 __REG(0x40A0009C) /* OS Timer Match Register 11 */ - -#define OMCR4 __REG(0x40A000C0) /* OS Match Control Register 4 */ -#define OMCR5 __REG(0x40A000C4) /* OS Match Control Register 5 */ -#define OMCR6 __REG(0x40A000C8) /* OS Match Control Register 6 */ -#define OMCR7 __REG(0x40A000CC) /* OS Match Control Register 7 */ -#define OMCR8 __REG(0x40A000D0) /* OS Match Control Register 8 */ -#define OMCR9 __REG(0x40A000D4) /* OS Match Control Register 9 */ -#define OMCR10 __REG(0x40A000D8) /* OS Match Control Register 10 */ -#define OMCR11 __REG(0x40A000DC) /* OS Match Control Register 11 */ - -#define OSCR_CLK_FREQ 3250 /* kHz = 3.25 MHz */ -#endif /* CONFIG_CPU_MONAHANS */ +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) +#define OSCR4 0x40A00040 /* OS Timer Counter Register 4 */ +#define OSCR5 0x40A00044 /* OS Timer Counter Register 5 */ +#define OSCR6 0x40A00048 /* OS Timer Counter Register 6 */ +#define OSCR7 0x40A0004C /* OS Timer Counter Register 7 */ +#define OSCR8 0x40A00050 /* OS Timer Counter Register 8 */ +#define OSCR9 0x40A00054 /* OS Timer Counter Register 9 */ +#define OSCR10 0x40A00058 /* OS Timer Counter Register 10 */ +#define OSCR11 0x40A0005C /* OS Timer Counter Register 11 */ + +#define OSMR4 0x40A00080 /* OS Timer Match Register 4 */ +#define OSMR5 0x40A00084 /* OS Timer Match Register 5 */ +#define OSMR6 0x40A00088 /* OS Timer Match Register 6 */ +#define OSMR7 0x40A0008C /* OS Timer Match Register 7 */ +#define OSMR8 0x40A00090 /* OS Timer Match Register 8 */ +#define OSMR9 0x40A00094 /* OS Timer Match Register 9 */ +#define OSMR10 0x40A00098 /* OS Timer Match Register 10 */ +#define OSMR11 0x40A0009C /* OS Timer Match Register 11 */ + +#define OMCR4 0x40A000C0 /* OS Match Control Register 4 */ +#define OMCR5 0x40A000C4 /* OS Match Control Register 5 */ +#define OMCR6 0x40A000C8 /* OS Match Control Register 6 */ +#define OMCR7 0x40A000CC /* OS Match Control Register 7 */ +#define OMCR8 0x40A000D0 /* OS Match Control Register 8 */ +#define OMCR9 0x40A000D4 /* OS Match Control Register 9 */ +#define OMCR10 0x40A000D8 /* OS Match Control Register 10 */ +#define OMCR11 0x40A000DC /* OS Match Control Register 11 */ + +#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */ #define OSSR_M4 (1 << 4) /* Match status channel 4 */ #define OSSR_M3 (1 << 3) /* Match status channel 3 */ @@ -1125,321 +1134,696 @@ typedef void (*ExcpHndlr) (void) ; #define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ #define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ +#define OSCR_CLK_FREQ 3250 + +/******************************************************************************/ /* - * Pulse Width Modulator + * Core Clock */ -#define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */ -#define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */ -#define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */ -#define PWM_CTRL1 __REG(0x40C00000) /* PWM 1 Control Register */ -#define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */ -#define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */ +#if defined(CONFIG_CPU_MONAHANS) +#define ACCR 0x41340000 /* Application Subsystem Clock Configuration Register */ +#define ACSR 0x41340004 /* Application Subsystem Clock Status Register */ +#define AICSR 0x41340008 /* Application Subsystem Interrupt Control/Status Register */ +#define CKENA 0x4134000C /* A Clock Enable Register */ +#define CKENB 0x41340010 /* B Clock Enable Register */ +#define AC97_DIV 0x41340014 /* AC97 clock divisor value register */ + +#define ACCR_SMC_MASK 0x03800000 /* Static Memory Controller Frequency Select */ +#define ACCR_SRAM_MASK 0x000c0000 /* SRAM Controller Frequency Select */ +#define ACCR_FC_MASK 0x00030000 /* Frequency Change Frequency Select */ +#define ACCR_HSIO_MASK 0x0000c000 /* High Speed IO Frequency Select */ +#define ACCR_DDR_MASK 0x00003000 /* DDR Memory Controller Frequency Select */ +#define ACCR_XN_MASK 0x00000700 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ +#define ACCR_XL_MASK 0x0000001f /* Crystal Frequency to Memory Frequency Multiplier */ +#define ACCR_XPDIS (1 << 31) +#define ACCR_SPDIS (1 << 30) +#define ACCR_13MEND1 (1 << 27) +#define ACCR_D0CS (1 << 26) +#define ACCR_13MEND2 (1 << 21) +#define ACCR_PCCE (1 << 11) + +#define CKENA_30_MSL0 (1 << 30) /* MSL0 Interface Unit Clock Enable */ +#define CKENA_29_SSP4 (1 << 29) /* SSP3 Unit Clock Enable */ +#define CKENA_28_SSP3 (1 << 28) /* SSP2 Unit Clock Enable */ +#define CKENA_27_SSP2 (1 << 27) /* SSP1 Unit Clock Enable */ +#define CKENA_26_SSP1 (1 << 26) /* SSP0 Unit Clock Enable */ +#define CKENA_25_TSI (1 << 25) /* TSI Clock Enable */ +#define CKENA_24_AC97 (1 << 24) /* AC97 Unit Clock Enable */ +#define CKENA_23_STUART (1 << 23) /* STUART Unit Clock Enable */ +#define CKENA_22_FFUART (1 << 22) /* FFUART Unit Clock Enable */ +#define CKENA_21_BTUART (1 << 21) /* BTUART Unit Clock Enable */ +#define CKENA_20_UDC (1 << 20) /* UDC Clock Enable */ +#define CKENA_19_TPM (1 << 19) /* TPM Unit Clock Enable */ +#define CKENA_18_USIM1 (1 << 18) /* USIM1 Unit Clock Enable */ +#define CKENA_17_USIM0 (1 << 17) /* USIM0 Unit Clock Enable */ +#define CKENA_15_CIR (1 << 15) /* Consumer IR Clock Enable */ +#define CKENA_14_KEY (1 << 14) /* Keypad Controller Clock Enable */ +#define CKENA_13_MMC1 (1 << 13) /* MMC1 Clock Enable */ +#define CKENA_12_MMC0 (1 << 12) /* MMC0 Clock Enable */ +#define CKENA_11_FLASH (1 << 11) /* Boot ROM Clock Enable */ +#define CKENA_10_SRAM (1 << 10) /* SRAM Controller Clock Enable */ +#define CKENA_9_SMC (1 << 9) /* Static Memory Controller */ +#define CKENA_8_DMC (1 << 8) /* Dynamic Memory Controller */ +#define CKENA_7_GRAPHICS (1 << 7) /* 2D Graphics Clock Enable */ +#define CKENA_6_USBCLI (1 << 6) /* USB Client Unit Clock Enable */ +#define CKENA_4_NAND (1 << 4) /* NAND Flash Controller Clock Enable */ +#define CKENA_3_CAMERA (1 << 3) /* Camera Interface Clock Enable */ +#define CKENA_2_USBHOST (1 << 2) /* USB Host Unit Clock Enable */ +#define CKENA_1_LCD (1 << 1) /* LCD Unit Clock Enable */ + +#define CKENB_9_SYSBUS2 (1 << 9) /* System bus 2 */ +#define CKENB_8_1WIRE (1 << 8) /* One Wire Interface Unit Clock Enable */ +#define CKENB_7_GPIO (1 << 7) /* GPIO Clock Enable */ +#define CKENB_6_IRQ (1 << 6) /* Interrupt Controller Clock Enable */ +#define CKENB_4_I2C (1 << 4) /* I2C Unit Clock Enable */ +#define CKENB_1_PWM1 (1 << 1) /* PWM2 & PWM3 Clock Enable */ +#define CKENB_0_PWM0 (1 << 0) /* PWM0 & PWM1 Clock Enable */ + +#else /* if defined CONFIG_CPU_MONAHANS */ + +#define CCCR 0x41300000 /* Core Clock Configuration Register */ +#define CKEN 0x41300004 /* Clock Enable Register */ +#define OSCC 0x41300008 /* Oscillator Configuration Register */ +#define CCSR 0x4130000C /* Core Clock Status Register */ + +#define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */ +#define CKEN22_MEMC (1 << 22) /* Memory Controler */ +#define CKEN21_MSHC (1 << 21) /* Memery Stick Host Controller */ +#define CKEN20_IM (1 << 20) /* Internal Memory Clock Enable */ +#define CKEN19_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */ +#define CKEN18_USIM (1 << 18) /* USIM Unit Clock Enable */ +#define CKEN17_MSL (1 << 17) /* MSL Interface Unit Clock Enable */ +#define CKEN15_PWR_I2C (1 << 15) /* PWR_I2C Unit Clock Enable */ +#define CKEN9_OST (1 << 9) /* OS Timer Unit Clock Enable */ +#define CKEN4_SSP3 (1 << 4) /* SSP3 Unit Clock Enable */ + +#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ +#if !defined(CONFIG_PXA27X) +#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ +#endif +#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ + +#define CKEN24_CAMERA (1 << 24) /* Camera Interface Clock Enable */ +#define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */ +#define CKEN22_MEMC (1 << 22) /* Memory Controller Clock Enable */ +#define CKEN21_MEMSTK (1 << 21) /* Memory Stick Host Controller */ +#define CKEN20_IM (1 << 20) /* Internal Memory Clock Enable */ +#define CKEN19_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */ +#define CKEN18_USIM (1 << 18) /* USIM Unit Clock Enable */ +#define CKEN17_MSL (1 << 17) /* MSL Unit Clock Enable */ +#define CKEN16_LCD (1 << 16) /* LCD Unit Clock Enable */ +#define CKEN15_PWRI2C (1 << 15) /* PWR I2C Unit Clock Enable */ +#define CKEN14_I2C (1 << 14) /* I2C Unit Clock Enable */ +#define CKEN13_FICP (1 << 13) /* FICP Unit Clock Enable */ +#define CKEN12_MMC (1 << 12) /* MMC Unit Clock Enable */ +#define CKEN11_USB (1 << 11) /* USB Unit Clock Enable */ +#if defined(CONFIG_PXA27X) +#define CKEN10_USBHOST (1 << 10) /* USB Host Unit Clock Enable */ +#define CKEN24_CAMERA (1 << 24) /* Camera Unit Clock Enable */ +#endif +#define CKEN8_I2S (1 << 8) /* I2S Unit Clock Enable */ +#define CKEN7_BTUART (1 << 7) /* BTUART Unit Clock Enable */ +#define CKEN6_FFUART (1 << 6) /* FFUART Unit Clock Enable */ +#define CKEN5_STUART (1 << 5) /* STUART Unit Clock Enable */ +#define CKEN3_SSP (1 << 3) /* SSP Unit Clock Enable */ +#define CKEN2_AC97 (1 << 2) /* AC97 Unit Clock Enable */ +#define CKEN1_PWM1 (1 << 1) /* PWM1 Clock Enable */ +#define CKEN0_PWM0 (1 << 0) /* PWM0 Clock Enable */ + +#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */ +#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ + +#if !defined(CONFIG_PXA27X) +#define CCCR_L09 (0x1F) +#define CCCR_L27 (0x1) +#define CCCR_L32 (0x2) +#define CCCR_L36 (0x3) +#define CCCR_L40 (0x4) +#define CCCR_L45 (0x5) + +#define CCCR_M1 (0x1 << 5) +#define CCCR_M2 (0x2 << 5) +#define CCCR_M4 (0x3 << 5) -#define PWM_CTRL2 __REG(0x40B00010) /* PWM 2 Control Register */ -#define PWM_PWDUTY2 __REG(0x40B00014) /* PWM 2 Duty Cycle Register */ -#define PWM_PERVAL2 __REG(0x40B00018) /* PWM 2 Period Control Register */ +#define CCCR_N10 (0x2 << 7) +#define CCCR_N15 (0x3 << 7) +#define CCCR_N20 (0x4 << 7) +#define CCCR_N25 (0x5 << 7) +#define CCCR_N30 (0x6 << 7) +#endif -#define PWM_CTRL3 __REG(0x40C00010) /* PWM 3 Control Register */ -#define PWM_PWDUTY3 __REG(0x40C00014) /* PWM 3 Duty Cycle Register */ -#define PWM_PERVAL3 __REG(0x40C00018) /* PWM 3 Period Control Register */ +#endif /* CONFIG_CPU_MONAHANS */ +/******************************************************************************/ /* - * Interrupt Controller + * Pulse Width Modulator */ -#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */ -#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */ -#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */ -#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */ -#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ -#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ +#define PWM_CTRL0 0x40B00000 /* PWM 0 Control Register */ +#define PWM_PWDUTY0 0x40B00004 /* PWM 0 Duty Cycle Register */ +#define PWM_PERVAL0 0x40B00008 /* PWM 0 Period Control Register */ -#ifdef CONFIG_CPU_MONAHANS -#define ICHP __REG(0x40D00018) /* Interrupt Controller Highest Priority Register */ -/* Missing: 32 Interrupt priority registers - * These are the same as beneath for PXA27x: maybe can be merged if - * GPIO Stuff is same too. +#define PWM_CTRL1 0x40C00000 /* PWM 1 Control Register */ +#define PWM_PWDUTY1 0x40C00004 /* PWM 1 Duty Cycle Register */ +#define PWM_PERVAL1 0x40C00008 /* PWM 1 Period Control Register */ + +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) +#define PWM_CTRL2 0x40B00010 /* PWM 2 Control Register */ +#define PWM_PWDUTY2 0x40B00014 /* PWM 2 Duty Cycle Register */ +#define PWM_PERVAL2 0x40B00018 /* PWM 2 Period Control Register */ + +#define PWM_CTRL3 0x40C00010 /* PWM 3 Control Register */ +#define PWM_PWDUTY3 0x40C00014 /* PWM 3 Duty Cycle Register */ +#define PWM_PERVAL3 0x40C00018 /* PWM 3 Period Control Register */ +#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */ + +/* + * Interrupt Controller */ -#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ -#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ -#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ -#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ -#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ -/* Missing: 2 Interrupt priority registers */ -#endif /* CONFIG_CPU_MONAHANS */ +#define ICIP 0x40D00000 /* Interrupt Controller IRQ Pending Register */ +#define ICMR 0x40D00004 /* Interrupt Controller Mask Register */ +#define ICLR 0x40D00008 /* Interrupt Controller Level Register */ +#define ICFP 0x40D0000C /* Interrupt Controller FIQ Pending Register */ +#define ICPR 0x40D00010 /* Interrupt Controller Pending Register */ +#define ICCR 0x40D00014 /* Interrupt Controller Control Register */ +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) +#define ICHP 0x40D00018 /* Interrupt Controller Highest Priority Register */ +#define ICIP2 0x40D0009C /* Interrupt Controller IRQ Pending Register 2 */ +#define ICMR2 0x40D000A0 /* Interrupt Controller Mask Register 2 */ +#define ICLR2 0x40D000A4 /* Interrupt Controller Level Register 2 */ +#define ICFP2 0x40D000A8 /* Interrupt Controller FIQ Pending Register 2 */ +#define ICPR2 0x40D000AC /* Interrupt Controller Pending Register 2 */ +#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */ + +/******************************************************************************/ /* * General Purpose I/O */ -#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */ -#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */ -#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */ +#define GPLR0 0x40E00000 /* GPIO Pin-Level Register GPIO<31:0> */ +#define GPLR1 0x40E00004 /* GPIO Pin-Level Register GPIO<63:32> */ +#define GPLR2 0x40E00008 /* GPIO Pin-Level Register GPIO<80:64> */ -#define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */ -#define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */ -#define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */ +#define GPDR0 0x40E0000C /* GPIO Pin Direction Register GPIO<31:0> */ +#define GPDR1 0x40E00010 /* GPIO Pin Direction Register GPIO<63:32> */ +#define GPDR2 0x40E00014 /* GPIO Pin Direction Register GPIO<80:64> */ -#define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */ -#define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */ -#define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */ +#define GPSR0 0x40E00018 /* GPIO Pin Output Set Register GPIO<31:0> */ +#define GPSR1 0x40E0001C /* GPIO Pin Output Set Register GPIO<63:32> */ +#define GPSR2 0x40E00020 /* GPIO Pin Output Set Register GPIO<80:64> */ -#define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */ -#define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */ -#define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */ +#define GPCR0 0x40E00024 /* GPIO Pin Output Clear Register GPIO<31:0> */ +#define GPCR1 0x40E00028 /* GPIO Pin Output Clear Register GPIO <63:32> */ +#define GPCR2 0x40E0002C /* GPIO Pin Output Clear Register GPIO <80:64> */ -#define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */ -#define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */ -#define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */ +#define GRER0 0x40E00030 /* GPIO Rising-Edge Detect Register GPIO<31:0> */ +#define GRER1 0x40E00034 /* GPIO Rising-Edge Detect Register GPIO<63:32> */ +#define GRER2 0x40E00038 /* GPIO Rising-Edge Detect Register GPIO<80:64> */ -#define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */ -#define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */ -#define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */ +#define GFER0 0x40E0003C /* GPIO Falling-Edge Detect Register GPIO<31:0> */ +#define GFER1 0x40E00040 /* GPIO Falling-Edge Detect Register GPIO<63:32> */ +#define GFER2 0x40E00044 /* GPIO Falling-Edge Detect Register GPIO<80:64> */ -#define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */ -#define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */ -#define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */ +#define GEDR0 0x40E00048 /* GPIO Edge Detect Status Register GPIO<31:0> */ +#define GEDR1 0x40E0004C /* GPIO Edge Detect Status Register GPIO<63:32> */ +#define GEDR2 0x40E00050 /* GPIO Edge Detect Status Register GPIO<80:64> */ + +#define GAFR0_L 0x40E00054 /* GPIO Alternate Function Select Register GPIO<15:0> */ +#define GAFR0_U 0x40E00058 /* GPIO Alternate Function Select Register GPIO<31:16> */ +#define GAFR1_L 0x40E0005C /* GPIO Alternate Function Select Register GPIO<47:32> */ +#define GAFR1_U 0x40E00060 /* GPIO Alternate Function Select Register GPIO<63:48> */ +#define GAFR2_L 0x40E00064 /* GPIO Alternate Function Select Register GPIO<79:64> */ +#define GAFR2_U 0x40E00068 /* GPIO Alternate Function Select Register GPIO 80 */ + +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) +#define GPLR3 0x40E00100 /* GPIO Pin-Level Register GPIO<127:96> */ +#define GPDR3 0x40E0010C /* GPIO Pin Direction Register GPIO<127:96> */ +#define GPSR3 0x40E00118 /* GPIO Pin Output Set Register GPIO<127:96> */ +#define GPCR3 0x40E00124 /* GPIO Pin Output Clear Register GPIO<127:96> */ +#define GRER3 0x40E00130 /* GPIO Rising-Edge Detect Register GPIO<127:96> */ +#define GFER3 0x40E0013C /* GPIO Falling-Edge Detect Register GPIO<127:96> */ +#define GEDR3 0x40E00148 /* GPIO Edge Detect Status Register GPIO<127:96> */ +#define GAFR3_L 0x40E0006C /* GPIO Alternate Function Select Register GPIO<111:96> */ +#define GAFR3_U 0x40E00070 /* GPIO Alternate Function Select Register GPIO<127:112> */ +#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */ #ifdef CONFIG_CPU_MONAHANS -#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */ -#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */ -#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */ -#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */ -#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */ -#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */ -#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */ - -#define GSDR0 __REG(0x40E00400) /* Bit-wise Set of GPDR[31:0] */ -#define GSDR1 __REG(0x40E00404) /* Bit-wise Set of GPDR[63:32] */ -#define GSDR2 __REG(0x40E00408) /* Bit-wise Set of GPDR[95:64] */ -#define GSDR3 __REG(0x40E0040C) /* Bit-wise Set of GPDR[127:96] */ - -#define GCDR0 __REG(0x40E00420) /* Bit-wise Clear of GPDR[31:0] */ -#define GCDR1 __REG(0x40E00424) /* Bit-wise Clear of GPDR[63:32] */ -#define GCDR2 __REG(0x40E00428) /* Bit-wise Clear of GPDR[95:64] */ -#define GCDR3 __REG(0x40E0042C) /* Bit-wise Clear of GPDR[127:96] */ - -#define GSRER0 __REG(0x40E00440) /* Set Rising Edge Det. Enable [31:0] */ -#define GSRER1 __REG(0x40E00444) /* Set Rising Edge Det. Enable [63:32] */ -#define GSRER2 __REG(0x40E00448) /* Set Rising Edge Det. Enable [95:64] */ -#define GSRER3 __REG(0x40E0044C) /* Set Rising Edge Det. Enable [127:96] */ - -#define GCRER0 __REG(0x40E00460) /* Clear Rising Edge Det. Enable [31:0] */ -#define GCRER1 __REG(0x40E00464) /* Clear Rising Edge Det. Enable [63:32] */ -#define GCRER2 __REG(0x40E00468) /* Clear Rising Edge Det. Enable [95:64] */ -#define GCRER3 __REG(0x40E0046C) /* Clear Rising Edge Det. Enable[127:96] */ - -#define GSFER0 __REG(0x40E00480) /* Set Falling Edge Det. Enable [31:0] */ -#define GSFER1 __REG(0x40E00484) /* Set Falling Edge Det. Enable [63:32] */ -#define GSFER2 __REG(0x40E00488) /* Set Falling Edge Det. Enable [95:64] */ -#define GSFER3 __REG(0x40E0048C) /* Set Falling Edge Det. Enable[127:96] */ - -#define GCFER0 __REG(0x40E004A0) /* Clr Falling Edge Det. Enable [31:0] */ -#define GCFER1 __REG(0x40E004A4) /* Clr Falling Edge Det. Enable [63:32] */ -#define GCFER2 __REG(0x40E004A8) /* Clr Falling Edge Det. Enable [95:64] */ -#define GCFER3 __REG(0x40E004AC) /* Clr Falling Edge Det. Enable[127:96] */ - -#define GSDR(x) __REG2(0x40E00400, ((x) & 0x60) >> 3) -#define GCDR(x) __REG2(0x40E00420, ((x) & 0x60) >> 3) - -/* Multi-funktion Pin Registers, uncomplete, only: - * - GPIO - * - Data Flash DF_* pins defined. +#define GSDR0 0x40E00400 /* Bit-wise Set of GPDR[31:0] */ +#define GSDR1 0x40E00404 /* Bit-wise Set of GPDR[63:32] */ +#define GSDR2 0x40E00408 /* Bit-wise Set of GPDR[95:64] */ +#define GSDR3 0x40E0040C /* Bit-wise Set of GPDR[127:96] */ + +#define GCDR0 0x40E00420 /* Bit-wise Clear of GPDR[31:0] */ +#define GCDR1 0x40E00424 /* Bit-wise Clear of GPDR[63:32] */ +#define GCDR2 0x40E00428 /* Bit-wise Clear of GPDR[95:64] */ +#define GCDR3 0x40E0042C /* Bit-wise Clear of GPDR[127:96] */ + +#define GSRER0 0x40E00440 /* Set Rising Edge Det. Enable [31:0] */ +#define GSRER1 0x40E00444 /* Set Rising Edge Det. Enable [63:32] */ +#define GSRER2 0x40E00448 /* Set Rising Edge Det. Enable [95:64] */ +#define GSRER3 0x40E0044C /* Set Rising Edge Det. Enable [127:96] */ + +#define GCRER0 0x40E00460 /* Clear Rising Edge Det. Enable [31:0] */ +#define GCRER1 0x40E00464 /* Clear Rising Edge Det. Enable [63:32] */ +#define GCRER2 0x40E00468 /* Clear Rising Edge Det. Enable [95:64] */ +#define GCRER3 0x40E0046C /* Clear Rising Edge Det. Enable[127:96] */ + +#define GSFER0 0x40E00480 /* Set Falling Edge Det. Enable [31:0] */ +#define GSFER1 0x40E00484 /* Set Falling Edge Det. Enable [63:32] */ +#define GSFER2 0x40E00488 /* Set Falling Edge Det. Enable [95:64] */ +#define GSFER3 0x40E0048C /* Set Falling Edge Det. Enable[127:96] */ + +#define GCFER0 0x40E004A0 /* Clr Falling Edge Det. Enable [31:0] */ +#define GCFER1 0x40E004A4 /* Clr Falling Edge Det. Enable [63:32] */ +#define GCFER2 0x40E004A8 /* Clr Falling Edge Det. Enable [95:64] */ +#define GCFER3 0x40E004AC /* Clr Falling Edge Det. Enable[127:96] */ + +#define GSDR(x) (0x40E00400 | ((x) & 0x60) >> 3) +#define GCDR(x) (0x40E00420 | ((x) & 0x60) >> 3) +#endif + +#define _GPLR(x) (0x40E00000 + (((x) & 0x60) >> 3)) +#define _GPDR(x) (0x40E0000C + (((x) & 0x60) >> 3)) +#define _GPSR(x) (0x40E00018 + (((x) & 0x60) >> 3)) +#define _GPCR(x) (0x40E00024 + (((x) & 0x60) >> 3)) +#define _GRER(x) (0x40E00030 + (((x) & 0x60) >> 3)) +#define _GFER(x) (0x40E0003C + (((x) & 0x60) >> 3)) +#define _GEDR(x) (0x40E00048 + (((x) & 0x60) >> 3)) +#define _GAFR(x) (0x40E00054 + (((x) & 0x70) >> 2)) + +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) +#define GPLR(x) (((((x) & 0x7f) < 96) ? _GPLR(x) : GPLR3)) +#define GPDR(x) (((((x) & 0x7f) < 96) ? _GPDR(x) : GPDR3)) +#define GPSR(x) (((((x) & 0x7f) < 96) ? _GPSR(x) : GPSR3)) +#define GPCR(x) (((((x) & 0x7f) < 96) ? _GPCR(x) : GPCR3)) +#define GRER(x) (((((x) & 0x7f) < 96) ? _GRER(x) : GRER3)) +#define GFER(x) (((((x) & 0x7f) < 96) ? _GFER(x) : GFER3)) +#define GEDR(x) (((((x) & 0x7f) < 96) ? _GEDR(x) : GEDR3)) +#define GAFR(x) (((((x) & 0x7f) < 96) ? _GAFR(x) : \ + ((((x) & 0x7f) < 112) ? GAFR3_L : GAFR3_U))) +#else +#define GPLR(x) _GPLR(x) +#define GPDR(x) _GPDR(x) +#define GPSR(x) _GPSR(x) +#define GPCR(x) _GPCR(x) +#define GRER(x) _GRER(x) +#define GFER(x) _GFER(x) +#define GEDR(x) _GEDR(x) +#define GAFR(x) _GAFR(x) +#endif + +#define GPIO_bit(x) (1 << ((x) & 0x1f)) + +/******************************************************************************/ +/* + * Multi-function Pin Registers: */ -#define GPIO0 __REG(0x40e10124) -#define GPIO1 __REG(0x40e10128) -#define GPIO2 __REG(0x40e1012c) -#define GPIO3 __REG(0x40e10130) -#define GPIO4 __REG(0x40e10134) -#define nXCVREN __REG(0x40e10138) - -#define DF_CLE_NOE __REG(0x40e10204) -#define DF_ALE_WE1 __REG(0x40e10208) - -#define DF_SCLK_E __REG(0x40e10210) -#define nBE0 __REG(0x40e10214) -#define nBE1 __REG(0x40e10218) -#define DF_ALE_WE2 __REG(0x40e1021c) -#define DF_INT_RnB __REG(0x40e10220) -#define DF_nCS0 __REG(0x40e10224) -#define DF_nCS1 __REG(0x40e10228) -#define DF_nWE __REG(0x40e1022c) -#define DF_nRE __REG(0x40e10230) -#define nLUA __REG(0x40e10234) -#define nLLA __REG(0x40e10238) -#define DF_ADDR0 __REG(0x40e1023c) -#define DF_ADDR1 __REG(0x40e10240) -#define DF_ADDR2 __REG(0x40e10244) -#define DF_ADDR3 __REG(0x40e10248) -#define DF_IO0 __REG(0x40e1024c) -#define DF_IO8 __REG(0x40e10250) -#define DF_IO1 __REG(0x40e10254) -#define DF_IO9 __REG(0x40e10258) -#define DF_IO2 __REG(0x40e1025c) -#define DF_IO10 __REG(0x40e10260) -#define DF_IO3 __REG(0x40e10264) -#define DF_IO11 __REG(0x40e10268) -#define DF_IO4 __REG(0x40e1026c) -#define DF_IO12 __REG(0x40e10270) -#define DF_IO5 __REG(0x40e10274) -#define DF_IO13 __REG(0x40e10278) -#define DF_IO6 __REG(0x40e1027c) -#define DF_IO14 __REG(0x40e10280) -#define DF_IO7 __REG(0x40e10284) -#define DF_IO15 __REG(0x40e10288) - -#define GPIO5 __REG(0x40e1028c) -#define GPIO6 __REG(0x40e10290) -#define GPIO7 __REG(0x40e10294) -#define GPIO8 __REG(0x40e10298) -#define GPIO9 __REG(0x40e1029c) - -#define GPIO11 __REG(0x40e102a0) -#define GPIO12 __REG(0x40e102a4) -#define GPIO13 __REG(0x40e102a8) -#define GPIO14 __REG(0x40e102ac) -#define GPIO15 __REG(0x40e102b0) -#define GPIO16 __REG(0x40e102b4) -#define GPIO17 __REG(0x40e102b8) -#define GPIO18 __REG(0x40e102bc) -#define GPIO19 __REG(0x40e102c0) -#define GPIO20 __REG(0x40e102c4) -#define GPIO21 __REG(0x40e102c8) -#define GPIO22 __REG(0x40e102cc) -#define GPIO23 __REG(0x40e102d0) -#define GPIO24 __REG(0x40e102d4) -#define GPIO25 __REG(0x40e102d8) -#define GPIO26 __REG(0x40e102dc) - -#define GPIO27 __REG(0x40e10400) -#define GPIO28 __REG(0x40e10404) -#define GPIO29 __REG(0x40e10408) -#define GPIO30 __REG(0x40e1040c) -#define GPIO31 __REG(0x40e10410) -#define GPIO32 __REG(0x40e10414) -#define GPIO33 __REG(0x40e10418) -#define GPIO34 __REG(0x40e1041c) -#define GPIO35 __REG(0x40e10420) -#define GPIO36 __REG(0x40e10424) -#define GPIO37 __REG(0x40e10428) -#define GPIO38 __REG(0x40e1042c) -#define GPIO39 __REG(0x40e10430) -#define GPIO40 __REG(0x40e10434) -#define GPIO41 __REG(0x40e10438) -#define GPIO42 __REG(0x40e1043c) -#define GPIO43 __REG(0x40e10440) -#define GPIO44 __REG(0x40e10444) -#define GPIO45 __REG(0x40e10448) -#define GPIO46 __REG(0x40e1044c) -#define GPIO47 __REG(0x40e10450) -#define GPIO48 __REG(0x40e10454) - -#define GPIO10 __REG(0x40e10458) - -#define GPIO49 __REG(0x40e1045c) -#define GPIO50 __REG(0x40e10460) -#define GPIO51 __REG(0x40e10464) -#define GPIO52 __REG(0x40e10468) -#define GPIO53 __REG(0x40e1046c) -#define GPIO54 __REG(0x40e10470) -#define GPIO55 __REG(0x40e10474) -#define GPIO56 __REG(0x40e10478) -#define GPIO57 __REG(0x40e1047c) -#define GPIO58 __REG(0x40e10480) -#define GPIO59 __REG(0x40e10484) -#define GPIO60 __REG(0x40e10488) -#define GPIO61 __REG(0x40e1048c) -#define GPIO62 __REG(0x40e10490) - -#define GPIO6_2 __REG(0x40e10494) -#define GPIO7_2 __REG(0x40e10498) -#define GPIO8_2 __REG(0x40e1049c) -#define GPIO9_2 __REG(0x40e104a0) -#define GPIO10_2 __REG(0x40e104a4) -#define GPIO11_2 __REG(0x40e104a8) -#define GPIO12_2 __REG(0x40e104ac) -#define GPIO13_2 __REG(0x40e104b0) - -#define GPIO63 __REG(0x40e104b4) -#define GPIO64 __REG(0x40e104b8) -#define GPIO65 __REG(0x40e104bc) -#define GPIO66 __REG(0x40e104c0) -#define GPIO67 __REG(0x40e104c4) -#define GPIO68 __REG(0x40e104c8) -#define GPIO69 __REG(0x40e104cc) -#define GPIO70 __REG(0x40e104d0) -#define GPIO71 __REG(0x40e104d4) -#define GPIO72 __REG(0x40e104d8) -#define GPIO73 __REG(0x40e104dc) - -#define GPIO14_2 __REG(0x40e104e0) -#define GPIO15_2 __REG(0x40e104e4) -#define GPIO16_2 __REG(0x40e104e8) -#define GPIO17_2 __REG(0x40e104ec) - -#define GPIO74 __REG(0x40e104f0) -#define GPIO75 __REG(0x40e104f4) -#define GPIO76 __REG(0x40e104f8) -#define GPIO77 __REG(0x40e104fc) -#define GPIO78 __REG(0x40e10500) -#define GPIO79 __REG(0x40e10504) -#define GPIO80 __REG(0x40e10508) -#define GPIO81 __REG(0x40e1050c) -#define GPIO82 __REG(0x40e10510) -#define GPIO83 __REG(0x40e10514) -#define GPIO84 __REG(0x40e10518) -#define GPIO85 __REG(0x40e1051c) -#define GPIO86 __REG(0x40e10520) -#define GPIO87 __REG(0x40e10524) -#define GPIO88 __REG(0x40e10528) -#define GPIO89 __REG(0x40e1052c) -#define GPIO90 __REG(0x40e10530) -#define GPIO91 __REG(0x40e10534) -#define GPIO92 __REG(0x40e10538) -#define GPIO93 __REG(0x40e1053c) -#define GPIO94 __REG(0x40e10540) -#define GPIO95 __REG(0x40e10544) -#define GPIO96 __REG(0x40e10548) -#define GPIO97 __REG(0x40e1054c) -#define GPIO98 __REG(0x40e10550) - -#define GPIO99 __REG(0x40e10600) -#define GPIO100 __REG(0x40e10604) -#define GPIO101 __REG(0x40e10608) -#define GPIO102 __REG(0x40e1060c) -#define GPIO103 __REG(0x40e10610) -#define GPIO104 __REG(0x40e10614) -#define GPIO105 __REG(0x40e10618) -#define GPIO106 __REG(0x40e1061c) -#define GPIO107 __REG(0x40e10620) -#define GPIO108 __REG(0x40e10624) -#define GPIO109 __REG(0x40e10628) -#define GPIO110 __REG(0x40e1062c) -#define GPIO111 __REG(0x40e10630) -#define GPIO112 __REG(0x40e10634) - -#define GPIO113 __REG(0x40e10638) -#define GPIO114 __REG(0x40e1063c) -#define GPIO115 __REG(0x40e10640) -#define GPIO116 __REG(0x40e10644) -#define GPIO117 __REG(0x40e10648) -#define GPIO118 __REG(0x40e1064c) -#define GPIO119 __REG(0x40e10650) -#define GPIO120 __REG(0x40e10654) -#define GPIO121 __REG(0x40e10658) -#define GPIO122 __REG(0x40e1065c) -#define GPIO123 __REG(0x40e10660) -#define GPIO124 __REG(0x40e10664) -#define GPIO125 __REG(0x40e10668) -#define GPIO126 __REG(0x40e1066c) -#define GPIO127 __REG(0x40e10670) - -#define GPIO0_2 __REG(0x40e10674) -#define GPIO1_2 __REG(0x40e10678) -#define GPIO2_2 __REG(0x40e1067c) -#define GPIO3_2 __REG(0x40e10680) -#define GPIO4_2 __REG(0x40e10684) -#define GPIO5_2 __REG(0x40e10688) +/* PXA320 */ +#if defined(CONFIG_CPU_PXA320) +#define DF_IO0 0x40e1024c +#define DF_IO1 0x40e10254 +#define DF_IO2 0x40e1025c +#define DF_IO3 0x40e10264 +#define DF_IO4 0x40e1026c +#define DF_IO5 0x40e10274 +#define DF_IO6 0x40e1027c +#define DF_IO7 0x40e10284 +#define DF_IO8 0x40e10250 +#define DF_IO9 0x40e10258 +#define DF_IO10 0x40e10260 +#define DF_IO11 0x40e10268 +#define DF_IO12 0x40e10270 +#define DF_IO13 0x40e10278 +#define DF_IO14 0x40e10280 +#define DF_IO15 0x40e10288 +#define DF_CLE_nOE 0x40e10204 +#define DF_ALE_nWE1 0x40e10208 +#define DF_ALE_nWE2 0x40e1021c +#define DF_SCLK_E 0x40e10210 +#define DF_nCS0 0x40e10224 +#define DF_nCS1 0x40e10228 +#define nBE0 0x40e10214 +#define nBE1 0x40e10218 +#define nLUA 0x40e10234 +#define nLLA 0x40e10238 +#define DF_ADDR0 0x40e1023c +#define DF_ADDR1 0x40e10240 +#define DF_ADDR2 0x40e10244 +#define DF_ADDR3 0x40e10248 +#define DF_INT_RnB 0x40e10220 +#define DF_nCS0 0x40e10224 +#define DF_nCS1 0x40e10228 +#define DF_nWE 0x40e1022c +#define DF_nRE 0x40e10230 + +#define nXCVREN 0x40e10138 + +#define GPIO0 0x40e10124 +#define GPIO1 0x40e10128 +#define GPIO2 0x40e1012c +#define GPIO3 0x40e10130 +#define GPIO4 0x40e10134 +#define GPIO5 0x40e1028c +#define GPIO6 0x40e10290 +#define GPIO7 0x40e10294 +#define GPIO8 0x40e10298 +#define GPIO9 0x40e1029c +#define GPIO10 0x40e10458 +#define GPIO11 0x40e102a0 +#define GPIO12 0x40e102a4 +#define GPIO13 0x40e102a8 +#define GPIO14 0x40e102ac +#define GPIO15 0x40e102b0 +#define GPIO16 0x40e102b4 +#define GPIO17 0x40e102b8 +#define GPIO18 0x40e102bc +#define GPIO19 0x40e102c0 +#define GPIO20 0x40e102c4 +#define GPIO21 0x40e102c8 +#define GPIO22 0x40e102cc +#define GPIO23 0x40e102d0 +#define GPIO24 0x40e102d4 +#define GPIO25 0x40e102d8 +#define GPIO26 0x40e102dc + +#define GPIO27 0x40e10400 +#define GPIO28 0x40e10404 +#define GPIO29 0x40e10408 +#define GPIO30 0x40e1040c +#define GPIO31 0x40e10410 +#define GPIO32 0x40e10414 +#define GPIO33 0x40e10418 +#define GPIO34 0x40e1041c +#define GPIO35 0x40e10420 +#define GPIO36 0x40e10424 +#define GPIO37 0x40e10428 +#define GPIO38 0x40e1042c +#define GPIO39 0x40e10430 +#define GPIO40 0x40e10434 +#define GPIO41 0x40e10438 +#define GPIO42 0x40e1043c +#define GPIO43 0x40e10440 +#define GPIO44 0x40e10444 +#define GPIO45 0x40e10448 +#define GPIO46 0x40e1044c +#define GPIO47 0x40e10450 +#define GPIO48 0x40e10454 +#define GPIO49 0x40e1045c +#define GPIO50 0x40e10460 +#define GPIO51 0x40e10464 +#define GPIO52 0x40e10468 +#define GPIO53 0x40e1046c +#define GPIO54 0x40e10470 +#define GPIO55 0x40e10474 +#define GPIO56 0x40e10478 +#define GPIO57 0x40e1047c +#define GPIO58 0x40e10480 +#define GPIO59 0x40e10484 +#define GPIO60 0x40e10488 +#define GPIO61 0x40e1048c +#define GPIO62 0x40e10490 + +#define GPIO6_2 0x40e10494 +#define GPIO7_2 0x40e10498 +#define GPIO8_2 0x40e1049c +#define GPIO9_2 0x40e104a0 +#define GPIO10_2 0x40e104a4 +#define GPIO11_2 0x40e104a8 +#define GPIO12_2 0x40e104ac +#define GPIO13_2 0x40e104b0 + +#define GPIO63 0x40e104b4 +#define GPIO64 0x40e104b8 +#define GPIO65 0x40e104bc +#define GPIO66 0x40e104c0 +#define GPIO67 0x40e104c4 +#define GPIO68 0x40e104c8 +#define GPIO69 0x40e104cc +#define GPIO70 0x40e104d0 +#define GPIO71 0x40e104d4 +#define GPIO72 0x40e104d8 +#define GPIO73 0x40e104dc + +#define GPIO14_2 0x40e104e0 +#define GPIO15_2 0x40e104e4 +#define GPIO16_2 0x40e104e8 +#define GPIO17_2 0x40e104ec + +#define GPIO74 0x40e104f0 +#define GPIO75 0x40e104f4 +#define GPIO76 0x40e104f8 +#define GPIO77 0x40e104fc +#define GPIO78 0x40e10500 +#define GPIO79 0x40e10504 +#define GPIO80 0x40e10508 +#define GPIO81 0x40e1050c +#define GPIO82 0x40e10510 +#define GPIO83 0x40e10514 +#define GPIO84 0x40e10518 +#define GPIO85 0x40e1051c +#define GPIO86 0x40e10520 +#define GPIO87 0x40e10524 +#define GPIO88 0x40e10528 +#define GPIO89 0x40e1052c +#define GPIO90 0x40e10530 +#define GPIO91 0x40e10534 +#define GPIO92 0x40e10538 +#define GPIO93 0x40e1053c +#define GPIO94 0x40e10540 +#define GPIO95 0x40e10544 +#define GPIO96 0x40e10548 +#define GPIO97 0x40e1054c +#define GPIO98 0x40e10550 + +#define GPIO99 0x40e10600 +#define GPIO100 0x40e10604 +#define GPIO101 0x40e10608 +#define GPIO102 0x40e1060c +#define GPIO103 0x40e10610 +#define GPIO104 0x40e10614 +#define GPIO105 0x40e10618 +#define GPIO106 0x40e1061c +#define GPIO107 0x40e10620 +#define GPIO108 0x40e10624 +#define GPIO109 0x40e10628 +#define GPIO110 0x40e1062c +#define GPIO111 0x40e10630 +#define GPIO112 0x40e10634 + +#define GPIO113 0x40e10638 +#define GPIO114 0x40e1063c +#define GPIO115 0x40e10640 +#define GPIO116 0x40e10644 +#define GPIO117 0x40e10648 +#define GPIO118 0x40e1064c +#define GPIO119 0x40e10650 +#define GPIO120 0x40e10654 +#define GPIO121 0x40e10658 +#define GPIO122 0x40e1065c +#define GPIO123 0x40e10660 +#define GPIO124 0x40e10664 +#define GPIO125 0x40e10668 +#define GPIO126 0x40e1066c +#define GPIO127 0x40e10670 + +#define GPIO0_2 0x40e10674 +#define GPIO1_2 0x40e10678 +#define GPIO2_2 0x40e1067c +#define GPIO3_2 0x40e10680 +#define GPIO4_2 0x40e10684 +#define GPIO5_2 0x40e10688 + +/* PXA300 and PXA310 */ +#elif defined(CONFIG_CPU_PXA300) || defined(CONFIG_CPU_PXA310) +#define DF_IO0 0x40e10220 +#define DF_IO1 0x40e10228 +#define DF_IO2 0x40e10230 +#define DF_IO3 0x40e10238 +#define DF_IO4 0x40e10258 +#define DF_IO5 0x40e10260 +#define DF_IO7 0x40e10270 +#define DF_IO6 0x40e10268 +#define DF_IO8 0x40e10224 +#define DF_IO9 0x40e1022c +#define DF_IO10 0x40e10234 +#define DF_IO11 0x40e1023c +#define DF_IO12 0x40e1025c +#define DF_IO13 0x40e10264 +#define DF_IO14 0x40e1026c +#define DF_IO15 0x40e10274 +#define DF_CLE_NOE 0x40e10240 +#define DF_ALE_nWE 0x40e1020c +#define DF_SCLK_E 0x40e10250 +#define nCS0 0x40e100c4 +#define nCS1 0x40e100c0 +#define nBE0 0x40e10204 +#define nBE1 0x40e10208 +#define nLUA 0x40e10244 +#define nLLA 0x40e10254 +#define DF_ADDR0 0x40e10210 +#define DF_ADDR1 0x40e10214 +#define DF_ADDR2 0x40e10218 +#define DF_ADDR3 0x40e1021c +#define DF_INT_RnB 0x40e100c8 +#define DF_nCS0 0x40e10248 +#define DF_nCS1 0x40e10278 +#define DF_nWE 0x40e100cc +#define DF_nRE 0x40e10200 + +#define GPIO0 0x40e100b4 +#define GPIO1 0x40e100b8 +#define GPIO2 0x40e100bc +#define GPIO3 0x40e1027c +#define GPIO4 0x40e10280 + +#define GPIO5 0x40e10284 +#define GPIO6 0x40e10288 +#define GPIO7 0x40e1028c +#define GPIO8 0x40e10290 +#define GPIO9 0x40e10294 +#define GPIO10 0x40e10298 +#define GPIO11 0x40e1029c +#define GPIO12 0x40e102a0 +#define GPIO13 0x40e102a4 +#define GPIO14 0x40e102a8 +#define GPIO15 0x40e102ac +#define GPIO16 0x40e102b0 +#define GPIO17 0x40e102b4 +#define GPIO18 0x40e102b8 +#define GPIO19 0x40e102bc +#define GPIO20 0x40e102c0 +#define GPIO21 0x40e102c4 +#define GPIO22 0x40e102c8 +#define GPIO23 0x40e102cc +#define GPIO24 0x40e102d0 +#define GPIO25 0x40e102d4 +#define GPIO26 0x40e102d8 + +#define GPIO27 0x40e10400 +#define GPIO28 0x40e10404 +#define GPIO29 0x40e10408 +#define ULPI_STP 0x40e1040c +#define ULPI_NXT 0x40e10410 +#define ULPI_DIR 0x40e10414 +#define GPIO30 0x40e10418 +#define GPIO31 0x40e1041c +#define GPIO32 0x40e10420 +#define GPIO33 0x40e10424 +#define GPIO34 0x40e10428 +#define GPIO35 0x40e1042c +#define GPIO36 0x40e10430 +#define GPIO37 0x40e10434 +#define GPIO38 0x40e10438 +#define GPIO39 0x40e1043c +#define GPIO40 0x40e10440 +#define GPIO41 0x40e10444 +#define GPIO42 0x40e10448 +#define GPIO43 0x40e1044c +#define GPIO44 0x40e10450 +#define GPIO45 0x40e10454 +#define GPIO46 0x40e10458 +#define GPIO47 0x40e1045c +#define GPIO48 0x40e10460 + +#define GPIO49 0x40e10464 +#define GPIO50 0x40e10468 +#define GPIO51 0x40e1046c +#define GPIO52 0x40e10470 +#define GPIO53 0x40e10474 +#define GPIO54 0x40e10478 +#define GPIO55 0x40e1047c +#define GPIO56 0x40e10480 +#define GPIO57 0x40e10484 +#define GPIO58 0x40e10488 +#define GPIO59 0x40e1048c +#define GPIO60 0x40e10490 +#define GPIO61 0x40e10494 +#define GPIO62 0x40e10498 +#define GPIO63 0x40e1049c +#define GPIO64 0x40e104a0 +#define GPIO65 0x40e104a4 +#define GPIO66 0x40e104a8 +#define GPIO67 0x40e104ac +#define GPIO68 0x40e104b0 +#define GPIO69 0x40e104b4 +#define GPIO70 0x40e104b8 +#define GPIO71 0x40e104bc +#define GPIO72 0x40e104c0 +#define GPIO73 0x40e104c4 +#define GPIO74 0x40e104c8 +#define GPIO75 0x40e104cc +#define GPIO76 0x40e104d0 +#define GPIO77 0x40e104d4 +#define GPIO78 0x40e104d8 +#define GPIO79 0x40e104dc +#define GPIO80 0x40e104e0 +#define GPIO81 0x40e104e4 +#define GPIO82 0x40e104e8 +#define GPIO83 0x40e104ec +#define GPIO84 0x40e104f0 +#define GPIO85 0x40e104f4 +#define GPIO86 0x40e104f8 +#define GPIO87 0x40e104fc +#define GPIO88 0x40e10500 +#define GPIO89 0x40e10504 +#define GPIO90 0x40e10508 +#define GPIO91 0x40e1050c +#define GPIO92 0x40e10510 +#define GPIO93 0x40e10514 +#define GPIO94 0x40e10518 +#define GPIO95 0x40e1051c +#define GPIO96 0x40e10520 +#define GPIO97 0x40e10524 +#define GPIO98 0x40e10528 + +#define GPIO99 0x40e10600 +#define GPIO100 0x40e10604 +#define GPIO101 0x40e10608 +#define GPIO102 0x40e1060c +#define GPIO103 0x40e10610 +#define GPIO104 0x40e10614 +#define GPIO105 0x40e10618 +#define GPIO106 0x40e1061c +#define GPIO107 0x40e10620 +#define GPIO108 0x40e10624 +#define GPIO109 0x40e10628 +#define GPIO110 0x40e1062c +#define GPIO111 0x40e10630 +#define GPIO112 0x40e10634 + +#define GPIO113 0x40e10638 +#define GPIO114 0x40e1063c +#define GPIO115 0x40e10640 +#define GPIO116 0x40e10644 +#define GPIO117 0x40e10648 +#define GPIO118 0x40e1064c +#define GPIO119 0x40e10650 +#define GPIO120 0x40e10654 +#define GPIO121 0x40e10658 +#define GPIO122 0x40e1065c +#define GPIO123 0x40e10660 +#define GPIO124 0x40e10664 +#define GPIO125 0x40e10668 +#define GPIO126 0x40e1066c +#define GPIO127 0x40e10670 + +#define GPIO0_2 0x40e10674 +#define GPIO1_2 0x40e10678 +#define GPIO2_2 0x40e102dc +#define GPIO3_2 0x40e102e0 +#define GPIO4_2 0x40e102e4 +#define GPIO5_2 0x40e102e8 +#define GPIO6_2 0x40e102ec + +#ifndef CONFIG_CPU_PXA300 /* PXA310 only */ +#define GPIO7_2 0x40e1052c +#define GPIO8_2 0x40e10530 +#define GPIO9_2 0x40e10534 +#define GPIO10_2 0x40e10538 +#endif +#endif +#ifdef CONFIG_CPU_MONAHANS /* MFPR Bit Definitions, see 4-10, Vol. 1 */ #define PULL_SEL 0x8000 #define PULLUP_EN 0x4000 @@ -1470,62 +1854,8 @@ typedef void (*ExcpHndlr) (void) ; #define AF_SEL_6 0x6 /* Alternate function 6 */ #define AF_SEL_7 0x7 /* Alternate function 7 */ - -#else /* CONFIG_CPU_MONAHANS */ - -#define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */ -#define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */ -#define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */ -#define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */ -#define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */ -#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO 80 */ #endif /* CONFIG_CPU_MONAHANS */ -/* More handy macros. The argument is a literal GPIO number. */ - -#define GPIO_bit(x) (1 << ((x) & 0x1f)) - -#ifdef CONFIG_PXA27X - -/* Interrupt Controller */ - -#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ -#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ -#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ -#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ -#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ - -#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) -#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) -#define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) -#define _GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) -#define _GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) -#define _GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) -#define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) -#define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) - -#define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3)) -#define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3)) -#define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3)) -#define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3)) -#define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3)) -#define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3)) -#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3)) -#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \ - ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U))) -#else - -#define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) -#define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) -#define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) -#define GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) -#define GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) -#define GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) -#define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) -#define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) - -#endif - /* GPIO alternate function assignments */ #define GPIO1_RST 1 /* reset */ @@ -1732,63 +2062,63 @@ typedef void (*ExcpHndlr) (void) ; */ #ifdef CONFIG_CPU_MONAHANS -#define ASCR __REG(0x40F40000) /* Application Subsystem Power Status/Control Register */ -#define ARSR __REG(0x40F40004) /* Application Subsystem Reset Status Register */ -#define AD3ER __REG(0x40F40008) /* Application Subsystem D3 state Wakeup Enable Register */ -#define AD3SR __REG(0x40F4000C) /* Application Subsystem D3 state Wakeup Status Register */ -#define AD2D0ER __REG(0x40F40010) /* Application Subsystem D2 to D0 state Wakeup Enable Register */ -#define AD2D0SR __REG(0x40F40014) /* Application Subsystem D2 to D0 state Wakeup Status Register */ -#define AD2D1ER __REG(0x40F40018) /* Application Subsystem D2 to D1 state Wakeup Enable Register */ -#define AD2D1SR __REG(0x40F4001C) /* Application Subsystem D2 to D1 state Wakeup Status Register */ -#define AD1D0ER __REG(0x40F40020) /* Application Subsystem D1 to D0 state Wakeup Enable Register */ -#define AD1D0SR __REG(0x40F40024) /* Application Subsystem D1 to D0 state Wakeup Status Register */ -#define ASDCNT __REG(0x40F40028) /* Application Subsystem SRAM Drowsy Count Register */ -#define AD3R __REG(0x40F40030) /* Application Subsystem D3 State Configuration Register */ -#define AD2R __REG(0x40F40034) /* Application Subsystem D2 State Configuration Register */ -#define AD1R __REG(0x40F40038) /* Application Subsystem D1 State Configuration Register */ - -#define PMCR __REG(0x40F50000) /* Power Manager Control Register */ -#define PSR __REG(0x40F50004) /* Power Manager S2 Status Register */ -#define PSPR __REG(0x40F50008) /* Power Manager Scratch Pad Register */ -#define PCFR __REG(0x40F5000C) /* Power Manager General Configuration Register */ -#define PWER __REG(0x40F50010) /* Power Manager Wake-up Enable Register */ -#define PWSR __REG(0x40F50014) /* Power Manager Wake-up Status Register */ -#define PECR __REG(0x40F50018) /* Power Manager EXT_WAKEUP[1:0] Control Register */ -#define DCDCSR __REG(0x40F50080) /* DC-DC Controller Status Register */ -#define PVCR __REG(0x40F50100) /* Power Manager Voltage Change Control Register */ -#define PCMD(x) __REG(0x40F50110 + x*4) -#define PCMD0 __REG(0x40F50110 + 0 * 4) -#define PCMD1 __REG(0x40F50110 + 1 * 4) -#define PCMD2 __REG(0x40F50110 + 2 * 4) -#define PCMD3 __REG(0x40F50110 + 3 * 4) -#define PCMD4 __REG(0x40F50110 + 4 * 4) -#define PCMD5 __REG(0x40F50110 + 5 * 4) -#define PCMD6 __REG(0x40F50110 + 6 * 4) -#define PCMD7 __REG(0x40F50110 + 7 * 4) -#define PCMD8 __REG(0x40F50110 + 8 * 4) -#define PCMD9 __REG(0x40F50110 + 9 * 4) -#define PCMD10 __REG(0x40F50110 + 10 * 4) -#define PCMD11 __REG(0x40F50110 + 11 * 4) -#define PCMD12 __REG(0x40F50110 + 12 * 4) -#define PCMD13 __REG(0x40F50110 + 13 * 4) -#define PCMD14 __REG(0x40F50110 + 14 * 4) -#define PCMD15 __REG(0x40F50110 + 15 * 4) -#define PCMD16 __REG(0x40F50110 + 16 * 4) -#define PCMD17 __REG(0x40F50110 + 17 * 4) -#define PCMD18 __REG(0x40F50110 + 18 * 4) -#define PCMD19 __REG(0x40F50110 + 19 * 4) -#define PCMD20 __REG(0x40F50110 + 20 * 4) -#define PCMD21 __REG(0x40F50110 + 21 * 4) -#define PCMD22 __REG(0x40F50110 + 22 * 4) -#define PCMD23 __REG(0x40F50110 + 23 * 4) -#define PCMD24 __REG(0x40F50110 + 24 * 4) -#define PCMD25 __REG(0x40F50110 + 25 * 4) -#define PCMD26 __REG(0x40F50110 + 26 * 4) -#define PCMD27 __REG(0x40F50110 + 27 * 4) -#define PCMD28 __REG(0x40F50110 + 28 * 4) -#define PCMD29 __REG(0x40F50110 + 29 * 4) -#define PCMD30 __REG(0x40F50110 + 30 * 4) -#define PCMD31 __REG(0x40F50110 + 31 * 4) +#define ASCR 0x40F40000 /* Application Subsystem Power Status/Control Register */ +#define ARSR 0x40F40004 /* Application Subsystem Reset Status Register */ +#define AD3ER 0x40F40008 /* Application Subsystem D3 state Wakeup Enable Register */ +#define AD3SR 0x40F4000C /* Application Subsystem D3 state Wakeup Status Register */ +#define AD2D0ER 0x40F40010 /* Application Subsystem D2 to D0 state Wakeup Enable Register */ +#define AD2D0SR 0x40F40014 /* Application Subsystem D2 to D0 state Wakeup Status Register */ +#define AD2D1ER 0x40F40018 /* Application Subsystem D2 to D1 state Wakeup Enable Register */ +#define AD2D1SR 0x40F4001C /* Application Subsystem D2 to D1 state Wakeup Status Register */ +#define AD1D0ER 0x40F40020 /* Application Subsystem D1 to D0 state Wakeup Enable Register */ +#define AD1D0SR 0x40F40024 /* Application Subsystem D1 to D0 state Wakeup Status Register */ +#define ASDCNT 0x40F40028 /* Application Subsystem SRAM Drowsy Count Register */ +#define AD3R 0x40F40030 /* Application Subsystem D3 State Configuration Register */ +#define AD2R 0x40F40034 /* Application Subsystem D2 State Configuration Register */ +#define AD1R 0x40F40038 /* Application Subsystem D1 State Configuration Register */ + +#define PMCR 0x40F50000 /* Power Manager Control Register */ +#define PSR 0x40F50004 /* Power Manager S2 Status Register */ +#define PSPR 0x40F50008 /* Power Manager Scratch Pad Register */ +#define PCFR 0x40F5000C /* Power Manager General Configuration Register */ +#define PWER 0x40F50010 /* Power Manager Wake-up Enable Register */ +#define PWSR 0x40F50014 /* Power Manager Wake-up Status Register */ +#define PECR 0x40F50018 /* Power Manager EXT_WAKEUP[1:0] Control Register */ +#define DCDCSR 0x40F50080 /* DC-DC Controller Status Register */ +#define PVCR 0x40F50100 /* Power Manager Voltage Change Control Register */ +#define PCMD(x) (0x40F50110 + x*4) +#define PCMD0 (0x40F50110 + 0 * 4) +#define PCMD1 (0x40F50110 + 1 * 4) +#define PCMD2 (0x40F50110 + 2 * 4) +#define PCMD3 (0x40F50110 + 3 * 4) +#define PCMD4 (0x40F50110 + 4 * 4) +#define PCMD5 (0x40F50110 + 5 * 4) +#define PCMD6 (0x40F50110 + 6 * 4) +#define PCMD7 (0x40F50110 + 7 * 4) +#define PCMD8 (0x40F50110 + 8 * 4) +#define PCMD9 (0x40F50110 + 9 * 4) +#define PCMD10 (0x40F50110 + 10 * 4) +#define PCMD11 (0x40F50110 + 11 * 4) +#define PCMD12 (0x40F50110 + 12 * 4) +#define PCMD13 (0x40F50110 + 13 * 4) +#define PCMD14 (0x40F50110 + 14 * 4) +#define PCMD15 (0x40F50110 + 15 * 4) +#define PCMD16 (0x40F50110 + 16 * 4) +#define PCMD17 (0x40F50110 + 17 * 4) +#define PCMD18 (0x40F50110 + 18 * 4) +#define PCMD19 (0x40F50110 + 19 * 4) +#define PCMD20 (0x40F50110 + 20 * 4) +#define PCMD21 (0x40F50110 + 21 * 4) +#define PCMD22 (0x40F50110 + 22 * 4) +#define PCMD23 (0x40F50110 + 23 * 4) +#define PCMD24 (0x40F50110 + 24 * 4) +#define PCMD25 (0x40F50110 + 25 * 4) +#define PCMD26 (0x40F50110 + 26 * 4) +#define PCMD27 (0x40F50110 + 27 * 4) +#define PCMD28 (0x40F50110 + 28 * 4) +#define PCMD29 (0x40F50110 + 29 * 4) +#define PCMD30 (0x40F50110 + 30 * 4) +#define PCMD31 (0x40F50110 + 31 * 4) #define PCMD_MBC (1<<12) #define PCMD_DCE (1<<11) @@ -1798,64 +2128,64 @@ typedef void (*ExcpHndlr) (void) ; #define PVCR_FVC (0x1 << 28) #define PVCR_VCSA (0x1<<14) #define PVCR_CommandDelay (0xf80) -#define PVCR_ReadPointer (0x01f00000) +#define PVCR_ReadPointer 0x01f00000 #define PVCR_SlaveAddress (0x7f) #else /* ifdef CONFIG_CPU_MONAHANS */ -#define PMCR __REG(0x40F00000) /* Power Manager Control Register */ -#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */ -#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */ -#define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */ -#define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */ -#define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */ -#define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */ -#define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */ -#define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */ -#define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */ -#define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */ -#define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */ -#define RCSR __REG(0x40F00030) /* Reset Controller Status Register */ - -#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */ -#define PSTR __REG(0x40F00038) /* Power Manager Standby Config Register */ -#define PSNR __REG(0x40F0003C) /* Power Manager Sense Config Register */ -#define PVCR __REG(0x40F00040) /* Power Manager VoltageControl Register */ -#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */ -#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */ -#define PCMD(x) __REG(0x40F00080 + x*4) -#define PCMD0 __REG(0x40F00080 + 0 * 4) -#define PCMD1 __REG(0x40F00080 + 1 * 4) -#define PCMD2 __REG(0x40F00080 + 2 * 4) -#define PCMD3 __REG(0x40F00080 + 3 * 4) -#define PCMD4 __REG(0x40F00080 + 4 * 4) -#define PCMD5 __REG(0x40F00080 + 5 * 4) -#define PCMD6 __REG(0x40F00080 + 6 * 4) -#define PCMD7 __REG(0x40F00080 + 7 * 4) -#define PCMD8 __REG(0x40F00080 + 8 * 4) -#define PCMD9 __REG(0x40F00080 + 9 * 4) -#define PCMD10 __REG(0x40F00080 + 10 * 4) -#define PCMD11 __REG(0x40F00080 + 11 * 4) -#define PCMD12 __REG(0x40F00080 + 12 * 4) -#define PCMD13 __REG(0x40F00080 + 13 * 4) -#define PCMD14 __REG(0x40F00080 + 14 * 4) -#define PCMD15 __REG(0x40F00080 + 15 * 4) -#define PCMD16 __REG(0x40F00080 + 16 * 4) -#define PCMD17 __REG(0x40F00080 + 17 * 4) -#define PCMD18 __REG(0x40F00080 + 18 * 4) -#define PCMD19 __REG(0x40F00080 + 19 * 4) -#define PCMD20 __REG(0x40F00080 + 20 * 4) -#define PCMD21 __REG(0x40F00080 + 21 * 4) -#define PCMD22 __REG(0x40F00080 + 22 * 4) -#define PCMD23 __REG(0x40F00080 + 23 * 4) -#define PCMD24 __REG(0x40F00080 + 24 * 4) -#define PCMD25 __REG(0x40F00080 + 25 * 4) -#define PCMD26 __REG(0x40F00080 + 26 * 4) -#define PCMD27 __REG(0x40F00080 + 27 * 4) -#define PCMD28 __REG(0x40F00080 + 28 * 4) -#define PCMD29 __REG(0x40F00080 + 29 * 4) -#define PCMD30 __REG(0x40F00080 + 30 * 4) -#define PCMD31 __REG(0x40F00080 + 31 * 4) +#define PMCR 0x40F00000 /* Power Manager Control Register */ +#define PSSR 0x40F00004 /* Power Manager Sleep Status Register */ +#define PSPR 0x40F00008 /* Power Manager Scratch Pad Register */ +#define PWER 0x40F0000C /* Power Manager Wake-up Enable Register */ +#define PRER 0x40F00010 /* Power Manager GPIO Rising-Edge Detect Enable Register */ +#define PFER 0x40F00014 /* Power Manager GPIO Falling-Edge Detect Enable Register */ +#define PEDR 0x40F00018 /* Power Manager GPIO Edge Detect Status Register */ +#define PCFR 0x40F0001C /* Power Manager General Configuration Register */ +#define PGSR0 0x40F00020 /* Power Manager GPIO Sleep State Register for GP[31-0] */ +#define PGSR1 0x40F00024 /* Power Manager GPIO Sleep State Register for GP[63-32] */ +#define PGSR2 0x40F00028 /* Power Manager GPIO Sleep State Register for GP[84-64] */ +#define PGSR3 0x40F0002C /* Power Manager GPIO Sleep State Register for GP[118-96] */ +#define RCSR 0x40F00030 /* Reset Controller Status Register */ + +#define PSLR 0x40F00034 /* Power Manager Sleep Config Register */ +#define PSTR 0x40F00038 /* Power Manager Standby Config Register */ +#define PSNR 0x40F0003C /* Power Manager Sense Config Register */ +#define PVCR 0x40F00040 /* Power Manager VoltageControl Register */ +#define PKWR 0x40F00050 /* Power Manager KB Wake-up Enable Reg */ +#define PKSR 0x40F00054 /* Power Manager KB Level-Detect Register */ +#define PCMD(x) (0x40F00080 + x*4) +#define PCMD0 (0x40F00080 + 0 * 4) +#define PCMD1 (0x40F00080 + 1 * 4) +#define PCMD2 (0x40F00080 + 2 * 4) +#define PCMD3 (0x40F00080 + 3 * 4) +#define PCMD4 (0x40F00080 + 4 * 4) +#define PCMD5 (0x40F00080 + 5 * 4) +#define PCMD6 (0x40F00080 + 6 * 4) +#define PCMD7 (0x40F00080 + 7 * 4) +#define PCMD8 (0x40F00080 + 8 * 4) +#define PCMD9 (0x40F00080 + 9 * 4) +#define PCMD10 (0x40F00080 + 10 * 4) +#define PCMD11 (0x40F00080 + 11 * 4) +#define PCMD12 (0x40F00080 + 12 * 4) +#define PCMD13 (0x40F00080 + 13 * 4) +#define PCMD14 (0x40F00080 + 14 * 4) +#define PCMD15 (0x40F00080 + 15 * 4) +#define PCMD16 (0x40F00080 + 16 * 4) +#define PCMD17 (0x40F00080 + 17 * 4) +#define PCMD18 (0x40F00080 + 18 * 4) +#define PCMD19 (0x40F00080 + 19 * 4) +#define PCMD20 (0x40F00080 + 20 * 4) +#define PCMD21 (0x40F00080 + 21 * 4) +#define PCMD22 (0x40F00080 + 22 * 4) +#define PCMD23 (0x40F00080 + 23 * 4) +#define PCMD24 (0x40F00080 + 24 * 4) +#define PCMD25 (0x40F00080 + 25 * 4) +#define PCMD26 (0x40F00080 + 26 * 4) +#define PCMD27 (0x40F00080 + 27 * 4) +#define PCMD28 (0x40F00080 + 28 * 4) +#define PCMD29 (0x40F00080 + 29 * 4) +#define PCMD30 (0x40F00080 + 30 * 4) +#define PCMD31 (0x40F00080 + 31 * 4) #define PCMD_MBC (1<<12) #define PCMD_DCE (1<<11) @@ -1891,183 +2221,58 @@ typedef void (*ExcpHndlr) (void) ; /* * SSP Serial Port Registers */ -#define SSCR0 __REG(0x41000000) /* SSP Control Register 0 */ -#define SSCR1 __REG(0x41000004) /* SSP Control Register 1 */ -#define SSSR __REG(0x41000008) /* SSP Status Register */ -#define SSITR __REG(0x4100000C) /* SSP Interrupt Test Register */ -#define SSDR __REG(0x41000010) /* (Write / Read) SSP Data Write Register/SSP Data Read Register */ +#define SSCR0 0x41000000 /* SSP Control Register 0 */ +#define SSCR1 0x41000004 /* SSP Control Register 1 */ +#define SSSR 0x41000008 /* SSP Status Register */ +#define SSITR 0x4100000C /* SSP Interrupt Test Register */ +#define SSDR 0x41000010 /* (Write / Read) SSP Data Write Register/SSP Data Read Register */ /* * MultiMediaCard (MMC) controller */ -#define MMC_STRPCL __REG(0x41100000) /* Control to start and stop MMC clock */ -#define MMC_STAT __REG(0x41100004) /* MMC Status Register (read only) */ -#define MMC_CLKRT __REG(0x41100008) /* MMC clock rate */ -#define MMC_SPI __REG(0x4110000c) /* SPI mode control bits */ -#define MMC_CMDAT __REG(0x41100010) /* Command/response/data sequence control */ -#define MMC_RESTO __REG(0x41100014) /* Expected response time out */ -#define MMC_RDTO __REG(0x41100018) /* Expected data read time out */ -#define MMC_BLKLEN __REG(0x4110001c) /* Block length of data transaction */ -#define MMC_NOB __REG(0x41100020) /* Number of blocks, for block mode */ -#define MMC_PRTBUF __REG(0x41100024) /* Partial MMC_TXFIFO FIFO written */ -#define MMC_I_MASK __REG(0x41100028) /* Interrupt Mask */ -#define MMC_I_REG __REG(0x4110002c) /* Interrupt Register (read only) */ -#define MMC_CMD __REG(0x41100030) /* Index of current command */ -#define MMC_ARGH __REG(0x41100034) /* MSW part of the current command argument */ -#define MMC_ARGL __REG(0x41100038) /* LSW part of the current command argument */ -#define MMC_RES __REG(0x4110003c) /* Response FIFO (read only) */ -#define MMC_RXFIFO __REG(0x41100040) /* Receive FIFO (read only) */ -#define MMC_TXFIFO __REG(0x41100044) /* Transmit FIFO (write only) */ - -/* - * Core Clock - */ - -#if defined(CONFIG_CPU_MONAHANS) -#define ACCR __REG(0x41340000) /* Application Subsystem Clock Configuration Register */ -#define ACSR __REG(0x41340004) /* Application Subsystem Clock Status Register */ -#define AICSR __REG(0x41340008) /* Application Subsystem Interrupt Control/Status Register */ -#define CKENA __REG(0x4134000C) /* A Clock Enable Register */ -#define CKENB __REG(0x41340010) /* B Clock Enable Register */ -#define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */ - -#define ACCR_SMC_MASK 0x03800000 /* Static Memory Controller Frequency Select */ -#define ACCR_SRAM_MASK 0x000c0000 /* SRAM Controller Frequency Select */ -#define ACCR_FC_MASK 0x00030000 /* Frequency Change Frequency Select */ -#define ACCR_HSIO_MASK 0x0000c000 /* High Speed IO Frequency Select */ -#define ACCR_DDR_MASK 0x00003000 /* DDR Memory Controller Frequency Select */ -#define ACCR_XN_MASK 0x00000700 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ -#define ACCR_XL_MASK 0x0000001f /* Crystal Frequency to Memory Frequency Multiplier */ -#define ACCR_XPDIS (1 << 31) -#define ACCR_SPDIS (1 << 30) -#define ACCR_13MEND1 (1 << 27) -#define ACCR_D0CS (1 << 26) -#define ACCR_13MEND2 (1 << 21) -#define ACCR_PCCE (1 << 11) - -#define CKENA_30_MSL0 (1 << 30) /* MSL0 Interface Unit Clock Enable */ -#define CKENA_29_SSP4 (1 << 29) /* SSP3 Unit Clock Enable */ -#define CKENA_28_SSP3 (1 << 28) /* SSP2 Unit Clock Enable */ -#define CKENA_27_SSP2 (1 << 27) /* SSP1 Unit Clock Enable */ -#define CKENA_26_SSP1 (1 << 26) /* SSP0 Unit Clock Enable */ -#define CKENA_25_TSI (1 << 25) /* TSI Clock Enable */ -#define CKENA_24_AC97 (1 << 24) /* AC97 Unit Clock Enable */ -#define CKENA_23_STUART (1 << 23) /* STUART Unit Clock Enable */ -#define CKENA_22_FFUART (1 << 22) /* FFUART Unit Clock Enable */ -#define CKENA_21_BTUART (1 << 21) /* BTUART Unit Clock Enable */ -#define CKENA_20_UDC (1 << 20) /* UDC Clock Enable */ -#define CKENA_19_TPM (1 << 19) /* TPM Unit Clock Enable */ -#define CKENA_18_USIM1 (1 << 18) /* USIM1 Unit Clock Enable */ -#define CKENA_17_USIM0 (1 << 17) /* USIM0 Unit Clock Enable */ -#define CKENA_15_CIR (1 << 15) /* Consumer IR Clock Enable */ -#define CKENA_14_KEY (1 << 14) /* Keypad Controller Clock Enable */ -#define CKENA_13_MMC1 (1 << 13) /* MMC1 Clock Enable */ -#define CKENA_12_MMC0 (1 << 12) /* MMC0 Clock Enable */ -#define CKENA_11_FLASH (1 << 11) /* Boot ROM Clock Enable */ -#define CKENA_10_SRAM (1 << 10) /* SRAM Controller Clock Enable */ -#define CKENA_9_SMC (1 << 9) /* Static Memory Controller */ -#define CKENA_8_DMC (1 << 8) /* Dynamic Memory Controller */ -#define CKENA_7_GRAPHICS (1 << 7) /* 2D Graphics Clock Enable */ -#define CKENA_6_USBCLI (1 << 6) /* USB Client Unit Clock Enable */ -#define CKENA_4_NAND (1 << 4) /* NAND Flash Controller Clock Enable */ -#define CKENA_3_CAMERA (1 << 3) /* Camera Interface Clock Enable */ -#define CKENA_2_USBHOST (1 << 2) /* USB Host Unit Clock Enable */ -#define CKENA_1_LCD (1 << 1) /* LCD Unit Clock Enable */ - -#define CKENB_9_SYSBUS2 (1 << 9) /* System bus 2 */ -#define CKENB_8_1WIRE (1 << 8) /* One Wire Interface Unit Clock Enable */ -#define CKENB_7_GPIO (1 << 7) /* GPIO Clock Enable */ -#define CKENB_6_IRQ (1 << 6) /* Interrupt Controller Clock Enable */ -#define CKENB_4_I2C (1 << 4) /* I2C Unit Clock Enable */ -#define CKENB_1_PWM1 (1 << 1) /* PWM2 & PWM3 Clock Enable */ -#define CKENB_0_PWM0 (1 << 0) /* PWM0 & PWM1 Clock Enable */ - -#else /* if defined CONFIG_CPU_MONAHANS */ - -#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */ -#define CKEN __REG(0x41300004) /* Clock Enable Register */ -#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */ - -#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ -#if !defined(CONFIG_PXA27X) -#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ -#endif -#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ - -#define CKEN24_CAMERA (1 << 24) /* Camera Interface Clock Enable */ -#define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */ -#define CKEN22_MEMC (1 << 22) /* Memory Controller Clock Enable */ -#define CKEN21_MEMSTK (1 << 21) /* Memory Stick Host Controller */ -#define CKEN20_IM (1 << 20) /* Internal Memory Clock Enable */ -#define CKEN19_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */ -#define CKEN18_USIM (1 << 18) /* USIM Unit Clock Enable */ -#define CKEN17_MSL (1 << 17) /* MSL Unit Clock Enable */ -#define CKEN16_LCD (1 << 16) /* LCD Unit Clock Enable */ -#define CKEN15_PWRI2C (1 << 15) /* PWR I2C Unit Clock Enable */ -#define CKEN14_I2C (1 << 14) /* I2C Unit Clock Enable */ -#define CKEN13_FICP (1 << 13) /* FICP Unit Clock Enable */ -#define CKEN12_MMC (1 << 12) /* MMC Unit Clock Enable */ -#define CKEN11_USB (1 << 11) /* USB Unit Clock Enable */ -#if defined(CONFIG_PXA27X) -#define CKEN10_USBHOST (1 << 10) /* USB Host Unit Clock Enable */ -#define CKEN24_CAMERA (1 << 24) /* Camera Unit Clock Enable */ -#endif -#define CKEN8_I2S (1 << 8) /* I2S Unit Clock Enable */ -#define CKEN7_BTUART (1 << 7) /* BTUART Unit Clock Enable */ -#define CKEN6_FFUART (1 << 6) /* FFUART Unit Clock Enable */ -#define CKEN5_STUART (1 << 5) /* STUART Unit Clock Enable */ -#define CKEN3_SSP (1 << 3) /* SSP Unit Clock Enable */ -#define CKEN2_AC97 (1 << 2) /* AC97 Unit Clock Enable */ -#define CKEN1_PWM1 (1 << 1) /* PWM1 Clock Enable */ -#define CKEN0_PWM0 (1 << 0) /* PWM0 Clock Enable */ - -#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */ -#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ - -#if !defined(CONFIG_PXA27X) -#define CCCR_L09 (0x1F) -#define CCCR_L27 (0x1) -#define CCCR_L32 (0x2) -#define CCCR_L36 (0x3) -#define CCCR_L40 (0x4) -#define CCCR_L45 (0x5) - -#define CCCR_M1 (0x1 << 5) -#define CCCR_M2 (0x2 << 5) -#define CCCR_M4 (0x3 << 5) - -#define CCCR_N10 (0x2 << 7) -#define CCCR_N15 (0x3 << 7) -#define CCCR_N20 (0x4 << 7) -#define CCCR_N25 (0x5 << 7) -#define CCCR_N30 (0x6 << 7) -#endif +#define MMC_STRPCL 0x41100000 /* Control to start and stop MMC clock */ +#define MMC_STAT 0x41100004 /* MMC Status Register (read only) */ +#define MMC_CLKRT 0x41100008 /* MMC clock rate */ +#define MMC_SPI 0x4110000c /* SPI mode control bits */ +#define MMC_CMDAT 0x41100010 /* Command/response/data sequence control */ +#define MMC_RESTO 0x41100014 /* Expected response time out */ +#define MMC_RDTO 0x41100018 /* Expected data read time out */ +#define MMC_BLKLEN 0x4110001c /* Block length of data transaction */ +#define MMC_NOB 0x41100020 /* Number of blocks, for block mode */ +#define MMC_PRTBUF 0x41100024 /* Partial MMC_TXFIFO FIFO written */ +#define MMC_I_MASK 0x41100028 /* Interrupt Mask */ +#define MMC_I_REG 0x4110002c /* Interrupt Register (read only) */ +#define MMC_CMD 0x41100030 /* Index of current command */ +#define MMC_ARGH 0x41100034 /* MSW part of the current command argument */ +#define MMC_ARGL 0x41100038 /* LSW part of the current command argument */ +#define MMC_RES 0x4110003c /* Response FIFO (read only) */ +#define MMC_RXFIFO 0x41100040 /* Receive FIFO (read only) */ +#define MMC_TXFIFO 0x41100044 /* Transmit FIFO (write only) */ -#endif /* CONFIG_CPU_MONAHANS */ /* * LCD */ -#define LCCR0 __REG(0x44000000) /* LCD Controller Control Register 0 */ -#define LCCR1 __REG(0x44000004) /* LCD Controller Control Register 1 */ -#define LCCR2 __REG(0x44000008) /* LCD Controller Control Register 2 */ -#define LCCR3 __REG(0x4400000C) /* LCD Controller Control Register 3 */ -#define DFBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */ -#define DFBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */ -#define LCSR0 __REG(0x44000038) /* LCD Controller Status Register */ -#define LCSR1 __REG(0x44000034) /* LCD Controller Status Register */ -#define LIIDR __REG(0x4400003C) /* LCD Controller Interrupt ID Register */ -#define TMEDRGBR __REG(0x44000040) /* TMED RGB Seed Register */ -#define TMEDCR __REG(0x44000044) /* TMED Control Register */ - -#define FDADR0 __REG(0x44000200) /* DMA Channel 0 Frame Descriptor Address Register */ -#define FSADR0 __REG(0x44000204) /* DMA Channel 0 Frame Source Address Register */ -#define FIDR0 __REG(0x44000208) /* DMA Channel 0 Frame ID Register */ -#define LDCMD0 __REG(0x4400020C) /* DMA Channel 0 Command Register */ -#define FDADR1 __REG(0x44000210) /* DMA Channel 1 Frame Descriptor Address Register */ -#define FSADR1 __REG(0x44000214) /* DMA Channel 1 Frame Source Address Register */ -#define FIDR1 __REG(0x44000218) /* DMA Channel 1 Frame ID Register */ -#define LDCMD1 __REG(0x4400021C) /* DMA Channel 1 Command Register */ +#define LCCR0 0x44000000 /* LCD Controller Control Register 0 */ +#define LCCR1 0x44000004 /* LCD Controller Control Register 1 */ +#define LCCR2 0x44000008 /* LCD Controller Control Register 2 */ +#define LCCR3 0x4400000C /* LCD Controller Control Register 3 */ +#define DFBR0 0x44000020 /* DMA Channel 0 Frame Branch Register */ +#define DFBR1 0x44000024 /* DMA Channel 1 Frame Branch Register */ +#define LCSR0 0x44000038 /* LCD Controller Status Register */ +#define LCSR1 0x44000034 /* LCD Controller Status Register */ +#define LIIDR 0x4400003C /* LCD Controller Interrupt ID Register */ +#define TMEDRGBR 0x44000040 /* TMED RGB Seed Register */ +#define TMEDCR 0x44000044 /* TMED Control Register */ + +#define FDADR0 0x44000200 /* DMA Channel 0 Frame Descriptor Address Register */ +#define FSADR0 0x44000204 /* DMA Channel 0 Frame Source Address Register */ +#define FIDR0 0x44000208 /* DMA Channel 0 Frame ID Register */ +#define LDCMD0 0x4400020C /* DMA Channel 0 Command Register */ +#define FDADR1 0x44000210 /* DMA Channel 1 Frame Descriptor Address Register */ +#define FSADR1 0x44000214 /* DMA Channel 1 Frame Source Address Register */ +#define FIDR1 0x44000218 /* DMA Channel 1 Frame ID Register */ +#define LDCMD1 0x4400021C /* DMA Channel 1 Command Register */ #define LCCR0_ENB (1 << 0) /* LCD Controller enable */ #define LCCR0_CMS (1 << 1) /* Color = 0, Monochrome = 1 */ @@ -2135,22 +2340,12 @@ typedef void (*ExcpHndlr) (void) ; /* [0..255 Tln] */ \ ((Tln) << FShft (LCCR2_BFW)) -#if 0 -#define LCCR3_PCD (0xff) /* Pixel clock divisor */ -#define LCCR3_ACB (0xff << 8) /* AC Bias pin frequency */ -#define LCCR3_ACB_S 8 -#endif - #define LCCR3_API (0xf << 16) /* AC Bias pin trasitions per interrupt */ #define LCCR3_API_S 16 #define LCCR3_VSP (1 << 20) /* vertical sync polarity */ #define LCCR3_HSP (1 << 21) /* horizontal sync polarity */ #define LCCR3_PCP (1 << 22) /* pixel clock polarity */ #define LCCR3_OEP (1 << 23) /* output enable polarity */ -#if 0 -#define LCCR3_BPP (7 << 24) /* bits per pixel */ -#define LCCR3_BPP_S 24 -#endif #define LCCR3_DPC (1 << 27) /* double pixel clock mode */ #define LCCR3_PDFOR_0 (0 << 30) @@ -2231,46 +2426,49 @@ typedef void (*ExcpHndlr) (void) ; */ #ifdef CONFIG_CPU_MONAHANS + +/* PXA3xx */ + /* Static Memory Controller Registers */ -#define MSC0 __REG_2(0x4A000008) /* Static Memory Control Register 0 */ -#define MSC1 __REG_2(0x4A00000C) /* Static Memory Control Register 1 */ -#define MECR __REG_2(0x4A000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */ -#define SXCNFG __REG_2(0x4A00001C) /* Synchronous Static Memory Control Register */ -#define MCMEM0 __REG_2(0x4A000028) /* Card interface Common Memory Space Socket 0 Timing */ -#define MCATT0 __REG_2(0x4A000030) /* Card interface Attribute Space Socket 0 Timing Configuration */ -#define MCIO0 __REG_2(0x4A000038) /* Card interface I/O Space Socket 0 Timing Configuration */ -#define MEMCLKCFG __REG_2(0x4A000068) /* SCLK speed configuration */ -#define CSADRCFG0 __REG_2(0x4A000080) /* Address Configuration for chip select 0 */ -#define CSADRCFG1 __REG_2(0x4A000084) /* Address Configuration for chip select 1 */ -#define CSADRCFG2 __REG_2(0x4A000088) /* Address Configuration for chip select 2 */ -#define CSADRCFG3 __REG_2(0x4A00008C) /* Address Configuration for chip select 3 */ -#define CSADRCFG_P __REG_2(0x4A000090) /* Address Configuration for pcmcia card interface */ -#define CSMSADRCFG __REG_2(0x4A0000A0) /* Master Address Configuration Register */ -#define CLK_RET_DEL __REG_2(0x4A0000B0) /* Delay line and mux selects for return data latching for sync. flash */ -#define ADV_RET_DEL __REG_2(0x4A0000B4) /* Delay line and mux selects for return data latching for sync. flash */ +#define MSC0 0x4A000008 /* Static Memory Control Register 0 */ +#define MSC1 0x4A00000C /* Static Memory Control Register 1 */ +#define MECR 0x4A000014 /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */ +#define SXCNFG 0x4A00001C /* Synchronous Static Memory Control Register */ +#define MCMEM0 0x4A000028 /* Card interface Common Memory Space Socket 0 Timing */ +#define MCATT0 0x4A000030 /* Card interface Attribute Space Socket 0 Timing Configuration */ +#define MCIO0 0x4A000038 /* Card interface I/O Space Socket 0 Timing Configuration */ +#define MEMCLKCFG 0x4A000068 /* SCLK speed configuration */ +#define CSADRCFG0 0x4A000080 /* Address Configuration for chip select 0 */ +#define CSADRCFG1 0x4A000084 /* Address Configuration for chip select 1 */ +#define CSADRCFG2 0x4A000088 /* Address Configuration for chip select 2 */ +#define CSADRCFG3 0x4A00008C /* Address Configuration for chip select 3 */ +#define CSADRCFG_P 0x4A000090 /* Address Configuration for pcmcia card interface */ +#define CSMSADRCFG 0x4A0000A0 /* Master Address Configuration Register */ +#define CLK_RET_DEL 0x4A0000B0 /* Delay line and mux selects for return data latching for sync. flash */ +#define ADV_RET_DEL 0x4A0000B4 /* Delay line and mux selects for return data latching for sync. flash */ /* Dynamic Memory Controller Registers */ -#define MDCNFG __REG_2(0x48100000) /* SDRAM Configuration Register 0 */ -#define MDREFR __REG_2(0x48100004) /* SDRAM Refresh Control Register */ -#define FLYCNFG __REG_2(0x48100020) /* Fly-by DMA DVAL[1:0] polarities */ -#define MDMRS __REG_2(0x48100040) /* MRS value to be written to SDRAM */ -#define DDR_SCAL __REG_2(0x48100050) /* Software Delay Line Calibration/Configuration for external DDR memory. */ -#define DDR_HCAL __REG_2(0x48100060) /* Hardware Delay Line Calibration/Configuration for external DDR memory. */ -#define DDR_WCAL __REG_2(0x48100068) /* DDR Write Strobe Calibration Register */ -#define DMCIER __REG_2(0x48100070) /* Dynamic MC Interrupt Enable Register. */ -#define DMCISR __REG_2(0x48100078) /* Dynamic MC Interrupt Status Register. */ -#define DDR_DLS __REG_2(0x48100080) /* DDR Delay Line Value Status register for external DDR memory. */ -#define EMPI __REG_2(0x48100090) /* EMPI Control Register */ -#define RCOMP __REG_2(0x48100100) -#define PAD_MA __REG_2(0x48100110) -#define PAD_MDMSB __REG_2(0x48100114) -#define PAD_MDLSB __REG_2(0x48100118) -#define PAD_DMEM __REG_2(0x4810011c) -#define PAD_SDCLK __REG_2(0x48100120) -#define PAD_SDCS __REG_2(0x48100124) -#define PAD_SMEM __REG_2(0x48100128) -#define PAD_SCLK __REG_2(0x4810012C) -#define TAI __REG_2(0x48100F00) /* TAI Tavor Address Isolation Register */ +#define MDCNFG 0x48100000 /* SDRAM Configuration Register 0 */ +#define MDREFR 0x48100004 /* SDRAM Refresh Control Register */ +#define FLYCNFG 0x48100020 /* Fly-by DMA DVAL[1:0] polarities */ +#define MDMRS 0x48100040 /* MRS value to be written to SDRAM */ +#define DDR_SCAL 0x48100050 /* Software Delay Line Calibration/Configuration for external DDR memory. */ +#define DDR_HCAL 0x48100060 /* Hardware Delay Line Calibration/Configuration for external DDR memory. */ +#define DDR_WCAL 0x48100068 /* DDR Write Strobe Calibration Register */ +#define DMCIER 0x48100070 /* Dynamic MC Interrupt Enable Register. */ +#define DMCISR 0x48100078 /* Dynamic MC Interrupt Status Register. */ +#define DDR_DLS 0x48100080 /* DDR Delay Line Value Status register for external DDR memory. */ +#define EMPI 0x48100090 /* EMPI Control Register */ +#define RCOMP 0x48100100 +#define PAD_MA 0x48100110 +#define PAD_MDMSB 0x48100114 +#define PAD_MDLSB 0x48100118 +#define PAD_DMEM 0x4810011c +#define PAD_SDCLK 0x48100120 +#define PAD_SDCS 0x48100124 +#define PAD_SMEM 0x48100128 +#define PAD_SCLK 0x4810012C +#define TAI 0x48100F00 /* TAI Tavor Address Isolation Register */ /* Some frequently used bits */ #define MDCNFG_DMAP 0x80000000 /* SDRAM 1GB Memory Map Enable */ @@ -2298,19 +2496,19 @@ typedef void (*ExcpHndlr) (void) ; /* Data Flash Controller Registers */ -#define NDCR __REG(0x43100000) /* Data Flash Control register */ -#define NDTR0CS0 __REG(0x43100004) /* Data Controller Timing Parameter 0 Register for ND_nCS0 */ -/* #define NDTR0CS1 __REG(0x43100008) /\* Data Controller Timing Parameter 0 Register for ND_nCS1 *\/ */ -#define NDTR1CS0 __REG(0x4310000C) /* Data Controller Timing Parameter 1 Register for ND_nCS0 */ -/* #define NDTR1CS1 __REG(0x43100010) /\* Data Controller Timing Parameter 1 Register for ND_nCS1 *\/ */ -#define NDSR __REG(0x43100014) /* Data Controller Status Register */ -#define NDPCR __REG(0x43100018) /* Data Controller Page Count Register */ -#define NDBDR0 __REG(0x4310001C) /* Data Controller Bad Block Register 0 */ -#define NDBDR1 __REG(0x43100020) /* Data Controller Bad Block Register 1 */ -#define NDDB __REG(0x43100040) /* Data Controller Data Buffer */ -#define NDCB0 __REG(0x43100048) /* Data Controller Command Buffer0 */ -#define NDCB1 __REG(0x4310004C) /* Data Controller Command Buffer1 */ -#define NDCB2 __REG(0x43100050) /* Data Controller Command Buffer2 */ +#define NDCR 0x43100000 /* Data Flash Control register */ +#define NDTR0CS0 0x43100004 /* Data Controller Timing Parameter 0 Register for ND_nCS0 */ +/* #define NDTR0CS1 0x43100008 /\* Data Controller Timing Parameter 0 Register for ND_nCS1 *\/ */ +#define NDTR1CS0 0x4310000C /* Data Controller Timing Parameter 1 Register for ND_nCS0 */ +/* #define NDTR1CS1 0x43100010 /\* Data Controller Timing Parameter 1 Register for ND_nCS1 *\/ */ +#define NDSR 0x43100014 /* Data Controller Status Register */ +#define NDPCR 0x43100018 /* Data Controller Page Count Register */ +#define NDBDR0 0x4310001C /* Data Controller Bad Block Register 0 */ +#define NDBDR1 0x43100020 /* Data Controller Bad Block Register 1 */ +#define NDDB 0x43100040 /* Data Controller Data Buffer */ +#define NDCB0 0x43100048 /* Data Controller Command Buffer0 */ +#define NDCB1 0x4310004C /* Data Controller Command Buffer1 */ +#define NDCB2 0x43100050 /* Data Controller Command Buffer2 */ #define NDCR_SPARE_EN (0x1<<31) #define NDCR_ECC_EN (0x1<<30) @@ -2386,7 +2584,9 @@ typedef void (*ExcpHndlr) (void) ; #else /* CONFIG_CPU_MONAHANS */ -#define MEMC_BASE __REG(0x48000000) /* Base of Memory Controller */ +/* PXA2xx */ + +#define MEMC_BASE 0x48000000 /* Base of Memory Controller */ #define MDCNFG_OFFSET 0x0 #define MDREFR_OFFSET 0x4 #define MSC0_OFFSET 0x8 @@ -2405,29 +2605,30 @@ typedef void (*ExcpHndlr) (void) ; #define MCIO1_OFFSET 0x3C #define MDMRS_OFFSET 0x40 -#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */ +#define MDCNFG 0x48000000 /* SDRAM Configuration Register 0 */ #define MDCNFG_DE0 0x00000001 #define MDCNFG_DE1 0x00000002 #define MDCNFG_DE2 0x00010000 #define MDCNFG_DE3 0x00020000 #define MDCNFG_DWID0 0x00000004 -#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */ -#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */ -#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */ -#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */ -#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */ -#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */ -#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */ -#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */ -#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */ -#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */ -#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */ -#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */ -#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */ -#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */ -#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */ -#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */ +#define MDREFR 0x48000004 /* SDRAM Refresh Control Register */ +#define MSC0 0x48000008 /* Static Memory Control Register 0 */ +#define MSC1 0x4800000C /* Static Memory Control Register 1 */ +#define MSC2 0x48000010 /* Static Memory Control Register 2 */ +#define MECR 0x48000014 /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */ +#define SXLCR 0x48000018 /* LCR value to be written to SDRAM-Timing Synchronous Flash */ +#define SXCNFG 0x4800001C /* Synchronous Static Memory Control Register */ +#define FLYCNFG 0x48000020 +#define SXMRS 0x48000024 /* MRS value to be written to Synchronous Flash or SMROM */ +#define MCMEM0 0x48000028 /* Card interface Common Memory Space Socket 0 Timing */ +#define MCMEM1 0x4800002C /* Card interface Common Memory Space Socket 1 Timing */ +#define MCATT0 0x48000030 /* Card interface Attribute Space Socket 0 Timing Configuration */ +#define MCATT1 0x48000034 /* Card interface Attribute Space Socket 1 Timing Configuration */ +#define MCIO0 0x48000038 /* Card interface I/O Space Socket 0 Timing Configuration */ +#define MCIO1 0x4800003C /* Card interface I/O Space Socket 1 Timing Configuration */ +#define MDMRS 0x48000040 /* MRS value to be written to SDRAM */ +#define BOOT_DEF 0x48000044 /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */ #define MDREFR_ALTREFA (1 << 31) /* Exiting Alternate Bus Master Mode Refresh Control */ #define MDREFR_ALTREFB (1 << 30) /* Entering Alternate Bus Master Mode Refresh Control */ @@ -2448,7 +2649,7 @@ typedef void (*ExcpHndlr) (void) ; #if defined(CONFIG_PXA27X) -#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ +#define ARB_CNTRL 0x48000048 /* Arbiter Control Register */ #define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */ #define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */ @@ -2460,80 +2661,41 @@ typedef void (*ExcpHndlr) (void) ; #define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ #define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ -#endif /* CONFIG_CPU_MONAHANS */ - -/* Interrupt Controller */ - -#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ -#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ -#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ -#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ -#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ - -/* General Purpose I/O */ - -#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */ -#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */ -#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */ -#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */ -#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */ -#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO <127:96> */ -#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */ -#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */ -#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */ - -/* Core Clock */ - -#define CCSR __REG(0x4130000C) /* Core Clock Status Register */ - -#define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */ -#define CKEN22_MEMC (1 << 22) /* Memory Controler */ -#define CKEN21_MSHC (1 << 21) /* Memery Stick Host Controller */ -#define CKEN20_IM (1 << 20) /* Internal Memory Clock Enable */ -#define CKEN19_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */ -#define CKEN18_USIM (1 << 18) /* USIM Unit Clock Enable */ -#define CKEN17_MSL (1 << 17) /* MSL Interface Unit Clock Enable */ -#define CKEN15_PWR_I2C (1 << 15) /* PWR_I2C Unit Clock Enable */ -#define CKEN9_OST (1 << 9) /* OS Timer Unit Clock Enable */ -#define CKEN4_SSP3 (1 << 4) /* SSP3 Unit Clock Enable */ - -/* Memory controller */ - -#define MDREFR_K0DB4 (1 << 29) /* SDCLK[0] divide by 4 */ +#endif /* CONFIG_PXA27X */ /* LCD registers */ -#define LCCR4 __REG(0x44000010) /* LCD Controller Control Register 4 */ -#define LCCR5 __REG(0x44000014) /* LCD Controller Control Register 5 */ -#define FBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */ -#define FBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */ -#define FBR2 __REG(0x44000028) /* DMA Channel 2 Frame Branch Register */ -#define FBR3 __REG(0x4400002C) /* DMA Channel 3 Frame Branch Register */ -#define FBR4 __REG(0x44000030) /* DMA Channel 4 Frame Branch Register */ -#define FDADR2 __REG(0x44000220) /* DMA Channel 2 Frame Descriptor Address Register */ -#define FSADR2 __REG(0x44000224) /* DMA Channel 2 Frame Source Address Register */ -#define FIDR2 __REG(0x44000228) /* DMA Channel 2 Frame ID Register */ -#define LDCMD2 __REG(0x4400022C) /* DMA Channel 2 Command Register */ -#define FDADR3 __REG(0x44000230) /* DMA Channel 3 Frame Descriptor Address Register */ -#define FSADR3 __REG(0x44000234) /* DMA Channel 3 Frame Source Address Register */ -#define FIDR3 __REG(0x44000238) /* DMA Channel 3 Frame ID Register */ -#define LDCMD3 __REG(0x4400023C) /* DMA Channel 3 Command Register */ -#define FDADR4 __REG(0x44000240) /* DMA Channel 4 Frame Descriptor Address Register */ -#define FSADR4 __REG(0x44000244) /* DMA Channel 4 Frame Source Address Register */ -#define FIDR4 __REG(0x44000248) /* DMA Channel 4 Frame ID Register */ -#define LDCMD4 __REG(0x4400024C) /* DMA Channel 4 Command Register */ -#define FDADR5 __REG(0x44000250) /* DMA Channel 5 Frame Descriptor Address Register */ -#define FSADR5 __REG(0x44000254) /* DMA Channel 5 Frame Source Address Register */ -#define FIDR5 __REG(0x44000258) /* DMA Channel 5 Frame ID Register */ -#define LDCMD5 __REG(0x4400025C) /* DMA Channel 5 Command Register */ - -#define OVL1C1 __REG(0x44000050) /* Overlay 1 Control Register 1 */ -#define OVL1C2 __REG(0x44000060) /* Overlay 1 Control Register 2 */ -#define OVL2C1 __REG(0x44000070) /* Overlay 2 Control Register 1 */ -#define OVL2C2 __REG(0x44000080) /* Overlay 2 Control Register 2 */ -#define CCR __REG(0x44000090) /* Cursor Control Register */ - -#define FBR5 __REG(0x44000110) /* DMA Channel 5 Frame Branch Register */ -#define FBR6 __REG(0x44000114) /* DMA Channel 6 Frame Branch Register */ +#define LCCR4 0x44000010 /* LCD Controller Control Register 4 */ +#define LCCR5 0x44000014 /* LCD Controller Control Register 5 */ +#define FBR0 0x44000020 /* DMA Channel 0 Frame Branch Register */ +#define FBR1 0x44000024 /* DMA Channel 1 Frame Branch Register */ +#define FBR2 0x44000028 /* DMA Channel 2 Frame Branch Register */ +#define FBR3 0x4400002C /* DMA Channel 3 Frame Branch Register */ +#define FBR4 0x44000030 /* DMA Channel 4 Frame Branch Register */ +#define FDADR2 0x44000220 /* DMA Channel 2 Frame Descriptor Address Register */ +#define FSADR2 0x44000224 /* DMA Channel 2 Frame Source Address Register */ +#define FIDR2 0x44000228 /* DMA Channel 2 Frame ID Register */ +#define LDCMD2 0x4400022C /* DMA Channel 2 Command Register */ +#define FDADR3 0x44000230 /* DMA Channel 3 Frame Descriptor Address Register */ +#define FSADR3 0x44000234 /* DMA Channel 3 Frame Source Address Register */ +#define FIDR3 0x44000238 /* DMA Channel 3 Frame ID Register */ +#define LDCMD3 0x4400023C /* DMA Channel 3 Command Register */ +#define FDADR4 0x44000240 /* DMA Channel 4 Frame Descriptor Address Register */ +#define FSADR4 0x44000244 /* DMA Channel 4 Frame Source Address Register */ +#define FIDR4 0x44000248 /* DMA Channel 4 Frame ID Register */ +#define LDCMD4 0x4400024C /* DMA Channel 4 Command Register */ +#define FDADR5 0x44000250 /* DMA Channel 5 Frame Descriptor Address Register */ +#define FSADR5 0x44000254 /* DMA Channel 5 Frame Source Address Register */ +#define FIDR5 0x44000258 /* DMA Channel 5 Frame ID Register */ +#define LDCMD5 0x4400025C /* DMA Channel 5 Command Register */ + +#define OVL1C1 0x44000050 /* Overlay 1 Control Register 1 */ +#define OVL1C2 0x44000060 /* Overlay 1 Control Register 2 */ +#define OVL2C1 0x44000070 /* Overlay 2 Control Register 1 */ +#define OVL2C2 0x44000080 /* Overlay 2 Control Register 2 */ +#define CCR 0x44000090 /* Cursor Control Register */ + +#define FBR5 0x44000110 /* DMA Channel 5 Frame Branch Register */ +#define FBR6 0x44000114 /* DMA Channel 6 Frame Branch Register */ #define LCCR0_LDDALT (1<<26) /* LDD Alternate mapping bit when base pixel is RGBT16 */ #define LCCR0_OUC (1<<25) /* Overlay Underlay Control Bit */ @@ -2572,16 +2734,16 @@ typedef void (*ExcpHndlr) (void) ; /* Keypad controller */ -#define KPC __REG(0x41500000) /* Keypad Interface Control register */ -#define KPDK __REG(0x41500008) /* Keypad Interface Direct Key register */ -#define KPREC __REG(0x41500010) /* Keypad Intefcace Rotary Encoder register */ -#define KPMK __REG(0x41500018) /* Keypad Intefcace Matrix Key register */ -#define KPAS __REG(0x41500020) /* Keypad Interface Automatic Scan register */ -#define KPASMKP0 __REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */ -#define KPASMKP1 __REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */ -#define KPASMKP2 __REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */ -#define KPASMKP3 __REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */ -#define KPKDI __REG(0x41500048) /* Keypad Interface Key Debounce Interval register */ +#define KPC 0x41500000 /* Keypad Interface Control register */ +#define KPDK 0x41500008 /* Keypad Interface Direct Key register */ +#define KPREC 0x41500010 /* Keypad Intefcace Rotary Encoder register */ +#define KPMK 0x41500018 /* Keypad Intefcace Matrix Key register */ +#define KPAS 0x41500020 /* Keypad Interface Automatic Scan register */ +#define KPASMKP0 0x41500028 /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */ +#define KPASMKP1 0x41500030 /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */ +#define KPASMKP2 0x41500038 /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */ +#define KPASMKP3 0x41500040 /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */ +#define KPKDI 0x41500048 /* Keypad Interface Key Debounce Interval register */ #define KPC_AS (0x1 << 30) /* Automatic Scan bit */ #define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */ @@ -2623,15 +2785,15 @@ typedef void (*ExcpHndlr) (void) ; #define KPASMKPx_SO (0x1 << 31) #define GPIO113_BIT (1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */ -#define PSLR __REG(0x40F00034) -#define PSTR __REG(0x40F00038) /* Power Manager Standby Configuration Reg */ -#define PSNR __REG(0x40F0003C) /* Power Manager Sense Configuration Reg */ -#define PVCR __REG(0x40F00040) /* Power Manager Voltage Change Control Reg */ -#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-Up Enable Reg */ -#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Status Reg */ -#define OSMR4 __REG(0x40A00080) /* */ -#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ -#define OMCR4 __REG(0x40A000C0) /* */ +#define PSLR 0x40F00034 +#define PSTR 0x40F00038 /* Power Manager Standby Configuration Reg */ +#define PSNR 0x40F0003C /* Power Manager Sense Configuration Reg */ +#define PVCR 0x40F00040 /* Power Manager Voltage Change Control Reg */ +#define PKWR 0x40F00050 /* Power Manager KB Wake-Up Enable Reg */ +#define PKSR 0x40F00054 /* Power Manager KB Level-Detect Status Reg */ +#define OSMR4 0x40A00080 /* */ +#define OSCR4 0x40A00040 /* OS Timer Counter Register */ +#define OMCR4 0x40A000C0 /* */ #endif /* CONFIG_PXA27X */ diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h index 4e8dfd7..4124f0a 100644 --- a/arch/arm/include/asm/config.h +++ b/arch/arm/include/asm/config.h @@ -21,8 +21,9 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* Relocation to SDRAM works on all ARM boards */ #define CONFIG_RELOC_FIXUP_WORKS -#endif + +#define CONFIG_LMB +#define CONFIG_SYS_BOOT_RAMDISK_HIGH #endif diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index 6152f34..6dae432 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -47,6 +47,20 @@ typedef struct global_data { #ifdef CONFIG_FSL_ESDHC unsigned long sdhc_clk; #endif +#ifdef CONFIG_AT91FAMILY + /* "static data" needed by at91's clock.c */ + unsigned long cpu_clk_rate_hz; + unsigned long main_clk_rate_hz; + unsigned long mck_rate_hz; + unsigned long plla_rate_hz; + unsigned long pllb_rate_hz; + unsigned long at91_pllb_usb_init; + /* "static data" needed by at91's timer.c */ + unsigned long timer_rate_hz; + unsigned long tbl; + unsigned long tbu; + unsigned long long timer_reset_value; +#endif #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) unsigned long relocaddr; /* Start address of U-Boot in RAM */ phys_size_t ram_size; /* RAM size */ diff --git a/arch/arm/include/asm/u-boot-arm.h b/arch/arm/include/asm/u-boot-arm.h index faf800a..4ac4f61 100644 --- a/arch/arm/include/asm/u-boot-arm.h +++ b/arch/arm/include/asm/u-boot-arm.h @@ -30,18 +30,18 @@ #define _U_BOOT_ARM_H_ 1 /* for the following variables, see start.S */ -extern ulong _bss_start; /* code + data end == BSS start */ -extern ulong _bss_end; /* BSS end */ +extern ulong _bss_start_ofs; /* BSS start relative to _start */ +extern ulong _bss_end_ofs; /* BSS end relative to _start */ extern ulong IRQ_STACK_START; /* top of IRQ stack */ extern ulong FIQ_STACK_START; /* top of FIQ stack */ #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -extern ulong _armboot_start; /* code start */ +extern ulong _armboot_start_ofs; /* code start */ #else extern ulong _TEXT_BASE; /* code start */ -extern ulong _datarel_start; -extern ulong _datarelrolocal_start; -extern ulong _datarellocal_start; -extern ulong _datarelro_start; +extern ulong _datarel_start_ofs; +extern ulong _datarelrolocal_start_ofs; +extern ulong _datarellocal_start_ofs; +extern ulong _datarelro_start_ofs; extern ulong IRQ_STACK_START_IN; /* 8 bytes in IRQ stack */ #endif diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index 108e6c4..ffe261b 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -147,7 +147,7 @@ static int display_banner (void) #else _armboot_start, #endif - _bss_start, _bss_end); + _bss_start_ofs+_TEXT_BASE, _bss_end_ofs+_TEXT_BASE); #ifdef CONFIG_MODEM_SUPPORT debug ("Modem Support enabled\n"); #endif @@ -508,7 +508,7 @@ void board_init_f (ulong bootflag) memset ((void*)gd, 0, sizeof (gd_t)); - gd->mon_len = _bss_end - _TEXT_BASE; + gd->mon_len = _bss_end_ofs; for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { if ((*init_fnc_ptr)() != 0) { @@ -670,6 +670,7 @@ static char *failed = "*** failed ***\n"; * ************************************************************************ */ + void board_init_r (gd_t *id, ulong dest_addr) { char *s; @@ -693,7 +694,7 @@ void board_init_r (gd_t *id, ulong dest_addr) gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ - monitor_flash_len = _bss_start - _TEXT_BASE; + monitor_flash_len = _bss_start_ofs; debug ("monitor flash len: %08lX\n", monitor_flash_len); board_init(); /* Setup chipselects */ @@ -895,6 +896,7 @@ void board_init_r (gd_t *id, ulong dest_addr) /* NOTREACHED - no way out of command loop except booting */ } + #endif /* defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ void hang (void) diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c index 3101321..2e7b2e1 100644 --- a/arch/arm/lib/bootm.c +++ b/arch/arm/lib/bootm.c @@ -26,6 +26,9 @@ #include <image.h> #include <u-boot/zlib.h> #include <asm/byteorder.h> +#include <fdt.h> +#include <libfdt.h> +#include <fdt_support.h> DECLARE_GLOBAL_DATA_PTR; @@ -50,12 +53,52 @@ static void setup_end_tag (bd_t *bd); static struct tag *params; #endif /* CONFIG_SETUP_MEMORY_TAGS || CONFIG_CMDLINE_TAG || CONFIG_INITRD_TAG */ -int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images) +static ulong get_sp(void); +#if defined(CONFIG_OF_LIBFDT) +static int bootm_linux_fdt(int machid, bootm_headers_t *images); +#endif + +void arch_lmb_reserve(struct lmb *lmb) +{ + ulong sp; + + /* + * Booting a (Linux) kernel image + * + * Allocate space for command line and board info - the + * address should be as high as possible within the reach of + * the kernel (see CONFIG_SYS_BOOTMAPSZ settings), but in unused + * memory, which means far enough below the current stack + * pointer. + */ + sp = get_sp(); + debug("## Current stack ends at 0x%08lx ", sp); + + /* adjust sp by 1K to be safe */ + sp -= 1024; + lmb_reserve(lmb, sp, + gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size - sp); +} + +static void announce_and_cleanup(void) +{ + printf("\nStarting kernel ...\n\n"); + +#ifdef CONFIG_USB_DEVICE + { + extern void udc_disconnect(void); + udc_disconnect(); + } +#endif + cleanup_before_linux(); +} + +int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images) { bd_t *bd = gd->bd; char *s; int machid = bd->bi_arch_number; - void (*theKernel)(int zero, int arch, uint params); + void (*kernel_entry)(int zero, int arch, uint params); #ifdef CONFIG_CMDLINE_TAG char *commandline = getenv ("bootargs"); @@ -64,8 +107,6 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima if ((flag != 0) && (flag != BOOTM_STATE_OS_GO)) return 1; - theKernel = (void (*)(int, int, uint))images->ep; - s = getenv ("machid"); if (s) { machid = simple_strtoul (s, NULL, 16); @@ -74,8 +115,15 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima show_boot_progress (15); +#ifdef CONFIG_OF_LIBFDT + if (images->ft_len) + return bootm_linux_fdt(machid, images); +#endif + + kernel_entry = (void (*)(int, int, uint))images->ep; + debug ("## Transferring control to Linux (at address %08lx) ...\n", - (ulong) theKernel); + (ulong) kernel_entry); #if defined (CONFIG_SETUP_MEMORY_TAGS) || \ defined (CONFIG_CMDLINE_TAG) || \ @@ -99,27 +147,76 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima if (images->rd_start && images->rd_end) setup_initrd_tag (bd, images->rd_start, images->rd_end); #endif - setup_end_tag (bd); + setup_end_tag(bd); #endif - /* we assume that the kernel is in place */ - printf ("\nStarting kernel ...\n\n"); + announce_and_cleanup(); -#ifdef CONFIG_USB_DEVICE - { - extern void udc_disconnect (void); - udc_disconnect (); + kernel_entry(0, machid, bd->bi_boot_params); + /* does not return */ + + return 1; +} + +#if defined(CONFIG_OF_LIBFDT) +static int fixup_memory_node(void *blob) +{ + bd_t *bd = gd->bd; + int bank; + u64 start[CONFIG_NR_DRAM_BANKS]; + u64 size[CONFIG_NR_DRAM_BANKS]; + + for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) { + start[bank] = bd->bi_dram[bank].start; + size[bank] = bd->bi_dram[bank].size; } -#endif - cleanup_before_linux (); + return fdt_fixup_memory_banks(blob, start, size, CONFIG_NR_DRAM_BANKS); +} + +static int bootm_linux_fdt(int machid, bootm_headers_t *images) +{ + ulong rd_len; + bd_t *bd = gd->bd; + char *s; + void (*kernel_entry)(int zero, int dt_machid, void *dtblob); + ulong bootmap_base = getenv_bootm_low(); + ulong of_size = images->ft_len; + char **of_flat_tree = &images->ft_addr; + ulong *initrd_start = &images->initrd_start; + ulong *initrd_end = &images->initrd_end; + struct lmb *lmb = &images->lmb; + int ret; + + kernel_entry = (void (*)(int, int, void *))images->ep; + + rd_len = images->rd_end - images->rd_start; + ret = boot_ramdisk_high(lmb, images->rd_start, rd_len, + initrd_start, initrd_end); + if (ret) + return ret; + + ret = boot_relocate_fdt(lmb, bootmap_base, of_flat_tree, &of_size); + if (ret) + return ret; - theKernel (0, machid, bd->bi_boot_params); + debug("## Transferring control to Linux (at address %08lx) ...\n", + (ulong) kernel_entry); + + fdt_chosen(*of_flat_tree, 1); + + fixup_memory_node(*of_flat_tree); + + fdt_initrd(*of_flat_tree, *initrd_start, *initrd_end, 1); + + announce_and_cleanup(); + + kernel_entry(0, machid, *of_flat_tree); /* does not return */ return 1; } - +#endif #if defined (CONFIG_SETUP_MEMORY_TAGS) || \ defined (CONFIG_CMDLINE_TAG) || \ @@ -239,4 +336,12 @@ static void setup_end_tag (bd_t *bd) params->hdr.size = 0; } +static ulong get_sp(void) +{ + ulong ret; + + asm("mov %0, sp" : "=r"(ret) : ); + return ret; +} + #endif /* CONFIG_SETUP_MEMORY_TAGS || CONFIG_CMDLINE_TAG || CONFIG_INITRD_TAG */ diff --git a/arch/arm/lib/cache.c b/arch/arm/lib/cache.c index 55b633e..5715168 100644 --- a/arch/arm/lib/cache.c +++ b/arch/arm/lib/cache.c @@ -38,7 +38,7 @@ void flush_cache (unsigned long dummy1, unsigned long dummy2) /* disable write buffer as well (page 2-22) */ asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (0)); #endif -#ifdef CONFIG_ARMCORTEXA8 +#ifdef CONFIG_ARMV7 void v7_flush_cache_all(void); v7_flush_cache_all(); diff --git a/arch/m68k/include/asm/config.h b/arch/m68k/include/asm/config.h index 36438be..ec2cc16 100644 --- a/arch/m68k/include/asm/config.h +++ b/arch/m68k/include/asm/config.h @@ -22,5 +22,8 @@ #define _ASM_CONFIG_H_ #define CONFIG_LMB +#define CONFIG_SYS_BOOT_RAMDISK_HIGH +#define CONFIG_SYS_BOOT_GET_CMDLINE +#define CONFIG_SYS_BOOT_GET_KBD #endif diff --git a/arch/microblaze/lib/bootm.c b/arch/microblaze/lib/bootm.c index 8e2c6d8..9f6d6d6 100644 --- a/arch/microblaze/lib/bootm.c +++ b/arch/microblaze/lib/bootm.c @@ -46,12 +46,9 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima char *of_flat_tree = NULL; #if defined(CONFIG_OF_LIBFDT) - ulong of_size = 0; - - /* find flattened device tree */ - ret = boot_get_fdt (flag, argc, argv, images, &of_flat_tree, &of_size); - if (ret) - return 1; + /* did generic code already find a device tree? */ + if (images->ft_len) + of_flat_tree = images->ft_addr; #endif theKernel = (void (*)(char *, ulong, ulong))images->ep; @@ -64,9 +61,8 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima show_boot_progress (15); - if (!(ulong) of_flat_tree) - of_flat_tree = (char *)simple_strtoul (argv[3], NULL, 16); - + if (!of_flat_tree && argc > 3) + of_flat_tree = (char *)simple_strtoul(argv[3], NULL, 16); #ifdef DEBUG printf ("## Transferring control to Linux (at address 0x%08lx) " \ "ramdisk 0x%08lx, FDT 0x%08lx...\n", diff --git a/arch/nios2/lib/bootm.c b/arch/nios2/lib/bootm.c index 40a4d15..f32be52 100644 --- a/arch/nios2/lib/bootm.c +++ b/arch/nios2/lib/bootm.c @@ -36,11 +36,9 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima ulong initrd_end = images->rd_end; char *of_flat_tree = NULL; #if defined(CONFIG_OF_LIBFDT) - ulong of_size = 0; - - /* find flattened device tree */ - if (boot_get_fdt(flag, argc, argv, images, &of_flat_tree, &of_size)) - return 1; + /* did generic code already find a device tree? */ + if (images->ft_len) + of_flat_tree = images->ft_addr; #endif if (!of_flat_tree && argc > 3) of_flat_tree = (char *)simple_strtoul(argv[3], NULL, 16); diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h index d098657..a1942ca 100644 --- a/arch/powerpc/include/asm/config.h +++ b/arch/powerpc/include/asm/config.h @@ -22,6 +22,9 @@ #define _ASM_CONFIG_H_ #define CONFIG_LMB +#define CONFIG_SYS_BOOT_RAMDISK_HIGH +#define CONFIG_SYS_BOOT_GET_CMDLINE +#define CONFIG_SYS_BOOT_GET_KBD #ifndef CONFIG_MAX_MEM_MAPPED #if defined(CONFIG_4xx) || defined(CONFIG_E500) || defined(CONFIG_MPC86xx) diff --git a/arch/sparc/include/asm/config.h b/arch/sparc/include/asm/config.h index 36438be..6ddc349 100644 --- a/arch/sparc/include/asm/config.h +++ b/arch/sparc/include/asm/config.h @@ -22,5 +22,6 @@ #define _ASM_CONFIG_H_ #define CONFIG_LMB +#define CONFIG_SYS_BOOT_RAMDISK_HIGH #endif |