summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/imx-common/i2c-mxv7.c7
-rw-r--r--arch/arm/include/asm/imx-common/mxc_i2c.h38
2 files changed, 37 insertions, 8 deletions
diff --git a/arch/arm/imx-common/i2c-mxv7.c b/arch/arm/imx-common/i2c-mxv7.c
index 1a632e7..f3a5c3f 100644
--- a/arch/arm/imx-common/i2c-mxv7.c
+++ b/arch/arm/imx-common/i2c-mxv7.c
@@ -12,7 +12,7 @@
#include <asm/imx-common/mxc_i2c.h>
#include <watchdog.h>
-static int force_idle_bus(void *priv)
+int force_idle_bus(void *priv)
{
int i;
int sda, scl;
@@ -99,8 +99,9 @@ int setup_i2c(unsigned i2c_index, int speed, int slave_addr,
if (ret)
goto err_idle;
- bus_i2c_init(i2c_bases[i2c_index], speed, slave_addr,
- force_idle_bus, p);
+#ifndef CONFIG_DM_I2C
+ bus_i2c_init(i2c_index, speed, slave_addr, force_idle_bus, p);
+#endif
return 0;
diff --git a/arch/arm/include/asm/imx-common/mxc_i2c.h b/arch/arm/include/asm/imx-common/mxc_i2c.h
index af86163..355b25e 100644
--- a/arch/arm/include/asm/imx-common/mxc_i2c.h
+++ b/arch/arm/include/asm/imx-common/mxc_i2c.h
@@ -19,6 +19,36 @@ struct i2c_pads_info {
struct i2c_pin_ctrl sda;
};
+/*
+ * Information about i2c controller
+ * struct mxc_i2c_bus - information about the i2c[x] bus
+ * @index: i2c bus index
+ * @base: Address of I2C bus controller
+ * @driver_data: Flags for different platforms, such as I2C_QUIRK_FLAG.
+ * @speed: Speed of I2C bus
+ * @pads_info: pinctrl info for this i2c bus, will be used when pinctrl is ok.
+ * The following two is only to be compatible with non-DM part.
+ * @idle_bus_fn: function to force bus idle
+ * @idle_bus_data: parameter for idle_bus_fun
+ */
+struct mxc_i2c_bus {
+ /*
+ * board file can use this index to locate which i2c_pads_info is for
+ * i2c_idle_bus. When pinmux is implement, this entry can be
+ * discarded. Here we do not use dev->seq, because we do not want to
+ * export device to board file.
+ */
+ int index;
+ ulong base;
+ ulong driver_data;
+ int speed;
+ struct i2c_pads_info *pads_info;
+#ifndef CONFIG_DM_I2C
+ int (*idle_bus_fn)(void *p);
+ void *idle_bus_data;
+#endif
+};
+
#if defined(CONFIG_MX6QDL)
#define I2C_PADS(name, scl_i2c, scl_gpio, scl_gp, sda_i2c, sda_gpio, sda_gp) \
struct i2c_pads_info mx6q_##name = { \
@@ -54,10 +84,8 @@ struct i2c_pads_info {
int setup_i2c(unsigned i2c_index, int speed, int slave_addr,
struct i2c_pads_info *p);
-void bus_i2c_init(void *base, int speed, int slave_addr,
+void bus_i2c_init(int index, int speed, int slave_addr,
int (*idle_bus_fn)(void *p), void *p);
-int bus_i2c_read(void *base, uchar chip, uint addr, int alen, uchar *buf,
- int len);
-int bus_i2c_write(void *base, uchar chip, uint addr, int alen,
- const uchar *buf, int len);
+int force_idle_bus(void *priv);
+int i2c_idle_bus(struct mxc_i2c_bus *i2c_bus);
#endif