diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/Kconfig | 8 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/ls102xa/Kconfig | 87 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/ls102xa/soc.c | 4 | ||||
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 129 | ||||
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 24 | ||||
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 20 | ||||
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/mp.c | 16 | ||||
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/soc.c | 21 | ||||
| -rw-r--r-- | arch/arm/dts/fsl-ls1043a.dtsi | 21 | ||||
| -rw-r--r-- | arch/arm/dts/fsl-ls2080a.dtsi | 14 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-fsl-layerscape/config.h | 29 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h | 4 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-fsl-layerscape/mp.h | 1 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-fsl-layerscape/soc.h | 3 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-ls102xa/config.h | 13 |
16 files changed, 338 insertions, 58 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2d3303b..ada2217 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -656,6 +656,7 @@ config TARGET_VEXPRESS64_JUNO config TARGET_LS2080A_EMU bool "Support ls2080a_emu" + select ARCH_LS2080A select ARM64 select ARMV8_MULTIENTRY help @@ -666,6 +667,7 @@ config TARGET_LS2080A_EMU config TARGET_LS2080A_SIMU bool "Support ls2080a_simu" + select ARCH_LS2080A select ARM64 select ARMV8_MULTIENTRY help @@ -676,6 +678,7 @@ config TARGET_LS2080A_SIMU config TARGET_LS2080AQDS bool "Support ls2080aqds" + select ARCH_LS2080A select ARM64 select ARMV8_MULTIENTRY select SUPPORT_SPL @@ -687,6 +690,7 @@ config TARGET_LS2080AQDS config TARGET_LS2080ARDB bool "Support ls2080ardb" + select ARCH_LS2080A select ARM64 select ARMV8_MULTIENTRY select SUPPORT_SPL @@ -740,6 +744,8 @@ config TARGET_LS1012AFRDM config TARGET_LS1021AQDS bool "Support ls1021aqds" select CPU_V7 + select CPU_V7_HAS_NONSEC + select CPU_V7_HAS_VIRT select SUPPORT_SPL select ARCH_LS1021A select ARCH_SUPPORT_PSCI @@ -748,6 +754,8 @@ config TARGET_LS1021AQDS config TARGET_LS1021ATWR bool "Support ls1021atwr" select CPU_V7 + select CPU_V7_HAS_NONSEC + select CPU_V7_HAS_VIRT select SUPPORT_SPL select ARCH_LS1021A select ARCH_SUPPORT_PSCI diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index 0d4bfbc..c1eeefd 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -12,7 +12,7 @@ obj-y += cache_v7.o cache_v7_asm.o obj-y += cpu.o cp15.o obj-y += syslib.o -ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_MX7)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_SUNXI)$(CONFIG_ARCH_SOCFPGA),) +ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_MX7)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_SUNXI)$(CONFIG_ARCH_SOCFPGA)$(CONFIG_LS102XA),) ifneq ($(CONFIG_SKIP_LOWLEVEL_INIT),y) obj-y += lowlevel_init.o endif diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig index 920eb4a..28bf778 100644 --- a/arch/arm/cpu/armv7/ls102xa/Kconfig +++ b/arch/arm/cpu/armv7/ls102xa/Kconfig @@ -1,6 +1,89 @@ config ARCH_LS1021A - bool "Freescale Layerscape LS1021A SoC" + bool select SYS_FSL_ERRATUM_A010315 + select SYS_FSL_SRDS_1 + select SYS_HAS_SERDES + select SYS_FSL_DDR_BE + select SYS_FSL_DDR_VER_50 + +menu "LS102xA architecture" + depends on ARCH_LS1021A config LS1_DEEP_SLEEP - bool "Freescale Layerscape 1 deep sleep" + bool "Deep sleep" + depends on ARCH_LS1021A + +config MAX_CPUS + int "Maximum number of CPUs permitted for LS102xA" + depends on ARCH_LS1021A + default 2 + help + Set this number to the maximum number of possible CPUs in the SoC. + SoCs may have multiple clusters with each cluster may have multiple + ports. If some ports are reserved but higher ports are used for + cores, count the reserved ports. This will allocate enough memory + in spin table to properly handle all cores. + +config NUM_DDR_CONTROLLERS + int "Maximum DDR controllers" + default 1 + +config SYS_FSL_ERRATUM_A010315 + bool "Workaround for PCIe erratum A010315" + +config SYS_FSL_SRDS_1 + bool + +config SYS_FSL_SRDS_2 + bool + +config SYS_HAS_SERDES + bool + +config SYS_FSL_DDR + bool "Freescale DDR driver" + help + Select Freescale General DDR driver, shared between most Freescale + PowerPC- based SoCs (such as mpc83xx, mpc85xx, mpc86xx) and ARM- + based Layerscape SoCs (such as ls2080a). + +config SYS_FSL_DDR_BE + bool + default y + help + Access DDR registers in big-endian. + +config SYS_FSL_DDR_VER + int + default 50 if SYS_FSL_DDR_VER_50 + +config SYS_FSL_DDR_VER_50 + bool + +config SYS_FSL_DDRC_ARM_GEN3 + bool + +config SYS_FSL_DDRC_GEN4 + bool + +config SYS_FSL_DDR3 + bool "Freescale DDR3 controller" + depends on !SYS_FSL_DDR4 + select SYS_FSL_DDR + select SYS_FSL_DDRC_ARM_GEN3 + help + Enable Freescale DDR3 controller on ARM-based SoCs. + +config SYS_FSL_DDR4 + bool "Freescale DDR4 controller" + select SYS_FSL_DDR + select SYS_FSL_DDRC_GEN4 + help + Enable Freescale DDR4 controller. + +config SYS_FSL_IFC_BANK_COUNT + int "Maximum banks of Integrated flash controller" + depends on ARCH_LS1021A + default 8 + +endmenu diff --git a/arch/arm/cpu/armv7/ls102xa/soc.c b/arch/arm/cpu/armv7/ls102xa/soc.c index 31f00cb..52fb6f8 100644 --- a/arch/arm/cpu/armv7/ls102xa/soc.c +++ b/arch/arm/cpu/armv7/ls102xa/soc.c @@ -60,6 +60,10 @@ unsigned int get_soc_major_rev(void) return major; } +void s_init(void) +{ +} + #ifdef CONFIG_SYS_FSL_ERRATUM_A010315 void erratum_a010315(void) { diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index f8057ba..94ec8d5 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -1,17 +1,138 @@ config ARCH_LS1012A - bool "Freescale Layerscape LS1012A SoC" + bool + select FSL_LSCH2 + select SYS_FSL_DDR_BE select SYS_FSL_MMDC select SYS_FSL_ERRATUM_A010315 config ARCH_LS1043A - bool "Freescale Layerscape LS1043A SoC" + bool + select FSL_LSCH2 + select SYS_FSL_DDR_BE + select SYS_FSL_DDR_VER_50 select SYS_FSL_ERRATUM_A010315 + select SYS_FSL_ERRATUM_A010539 config ARCH_LS1046A - bool "Freescale Layerscape LS1046A SoC" + bool + select FSL_LSCH2 + select SYS_FSL_DDR_BE + select SYS_FSL_DDR4 + select SYS_FSL_DDR_VER_50 + select SYS_FSL_ERRATUM_A010539 + select SYS_FSL_SRDS_2 + +config ARCH_LS2080A + bool + select FSL_LSCH3 + select SYS_FSL_DDR4 + select SYS_FSL_DDR_LE + select SYS_FSL_DDR_VER_50 + select SYS_FSL_HAS_DP_DDR + select SYS_FSL_SRDS_2 + +config FSL_LSCH2 + bool + select SYS_FSL_SRDS_1 + select SYS_HAS_SERDES + +config FSL_LSCH3 + bool + select SYS_FSL_SRDS_1 + select SYS_HAS_SERDES + +menu "Layerscape architecture" + depends on FSL_LSCH2 || FSL_LSCH3 config SYS_FSL_MMDC - bool "Freescale Multi Mode DDR Controller" + bool config SYS_FSL_ERRATUM_A010315 bool "Workaround for PCIe erratum A010315" + +config SYS_FSL_ERRATUM_A010539 + bool "Workaround for PIN MUX erratum A010539" + +config MAX_CPUS + int "Maximum number of CPUs permitted for Layerscape" + default 4 if ARCH_LS1043A + default 4 if ARCH_LS1046A + default 16 if ARCH_LS2080A + default 1 + help + Set this number to the maximum number of possible CPUs in the SoC. + SoCs may have multiple clusters with each cluster may have multiple + ports. If some ports are reserved but higher ports are used for + cores, count the reserved ports. This will allocate enough memory + in spin table to properly handle all cores. + +config NUM_DDR_CONTROLLERS + int "Maximum DDR controllers" + default 3 if ARCH_LS2080A + default 1 + +config SYS_FSL_IFC_BANK_COUNT + int "Maximum banks of Integrated flash controller" + depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A + default 4 if ARCH_LS1043A + default 4 if ARCH_LS1046A + default 8 if ARCH_LS2080A + +config SYS_FSL_HAS_DP_DDR + bool + +config SYS_FSL_SRDS_1 + bool + +config SYS_FSL_SRDS_2 + bool + +config SYS_HAS_SERDES + bool + +config SYS_FSL_DDR + bool "Freescale DDR driver" + help + Select Freescale General DDR driver, shared between most Freescale + PowerPC- based SoCs (such as mpc83xx, mpc85xx, mpc86xx) and ARM- + based Layerscape SoCs (such as ls2080a). + +config SYS_FSL_DDR_BE + bool + help + Access DDR registers in big-endian. + +config SYS_FSL_DDR_LE + bool + help + Access DDR registers in little-endian. + +config SYS_FSL_DDR_VER + int + default 50 if SYS_FSL_DDR_VER_50 + +config SYS_FSL_DDR_VER_50 + bool + +config SYS_FSL_DDRC_ARM_GEN3 + bool + +config SYS_FSL_DDRC_GEN4 + bool + +config SYS_FSL_DDR3 + bool "Freescale DDR3 controller" + depends on !SYS_FSL_DDR4 + select SYS_FSL_DDR + select SYS_FSL_DDRC_ARM_GEN3 + help + Enable Freescale DDR3 controller on ARM-based SoCs. + +config SYS_FSL_DDR4 + bool "Freescale DDR4 controller" + select SYS_FSL_DDR + select SYS_FSL_DDRC_GEN4 + help + Enable Freescale DDR4 controller. + +endmenu diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index f865373..b7a2e0c 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -44,6 +44,9 @@ void cpu_name(char *name) if (IS_E_PROCESSOR(svr)) strcat(name, "E"); + + sprintf(name + strlen(name), " Rev%d.%d", + SVR_MAJ(svr), SVR_MIN(svr)); break; } @@ -200,6 +203,27 @@ static inline u32 initiator_type(u32 cluster, int init_id) return 0; } +u32 cpu_pos_mask(void) +{ + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + int i = 0; + u32 cluster, type, mask = 0; + + do { + int j; + + cluster = gur_in32(&gur->tp_cluster[i].lower); + for (j = 0; j < TP_INIT_PER_CLUSTER; j++) { + type = initiator_type(cluster, j); + if (type && (TP_ITYP_TYPE(type) == TP_ITYP_TYPE_ARM)) + mask |= 1 << (i * TP_INIT_PER_CLUSTER + j); + } + i++; + } while ((cluster & TP_CLUSTER_EOC) == 0x0); + + return mask; +} + u32 cpu_mask(void) { struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c index 40d6a76..1a8321b 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c @@ -108,6 +108,24 @@ remove_psci_node: } #endif +void fsl_fdt_disable_usb(void *blob) +{ + int off; + /* + * SYSCLK is used as a reference clock for USB. When the USB + * controller is used, SYSCLK must meet the additional requirement + * of 100 MHz. + */ + if (CONFIG_SYS_CLK_FREQ != 100000000) { + off = fdt_node_offset_by_compatible(blob, -1, "snps,dwc3"); + while (off != -FDT_ERR_NOTFOUND) { + fdt_status_disabled(blob, off); + off = fdt_node_offset_by_compatible(blob, off, + "snps,dwc3"); + } + } +} + void ft_cpu_setup(void *blob, bd_t *bd) { #ifdef CONFIG_FSL_LSCH2 @@ -150,4 +168,6 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CONFIG_SYS_DPAA_FMAN fdt_fixup_fman_firmware(blob); #endif + fsl_fdt_disable_usb(blob); + } diff --git a/arch/arm/cpu/armv8/fsl-layerscape/mp.c b/arch/arm/cpu/armv8/fsl-layerscape/mp.c index df7ffb8..f607c39 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/mp.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/mp.c @@ -104,6 +104,11 @@ int is_core_valid(unsigned int core) return !!((1 << core) & cpu_mask()); } +static int is_pos_valid(unsigned int pos) +{ + return !!((1 << pos) & cpu_pos_mask()); +} + int is_core_online(u64 cpu_id) { u64 *table; @@ -126,9 +131,9 @@ int cpu_disable(int nr) return 0; } -int core_to_pos(int nr) +static int core_to_pos(int nr) { - u32 cores = cpu_mask(); + u32 cores = cpu_pos_mask(); int i, count = 0; if (nr == 0) { @@ -139,14 +144,17 @@ int core_to_pos(int nr) } for (i = 1; i < 32; i++) { - if (is_core_valid(i)) { + if (is_pos_valid(i)) { count++; if (count == nr) break; } } - return count; + if (count != nr) + return -1; + + return i; } int cpu_status(int nr) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index 463d1e3..d68eeba 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -233,9 +233,8 @@ int sata_init(void) out_le32((void *)CONFIG_SYS_DCSR_DCFG_ADDR + 0x520, 0x80000000); #endif out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG); - out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY_2_CFG); - out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY_3_CFG); out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG); + out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG); ahci_init((void __iomem *)CONFIG_SYS_SATA); scsi_scan(0); @@ -321,6 +320,19 @@ void erratum_a010315(void) } #endif +static void erratum_a010539(void) +{ +#if defined(CONFIG_SYS_FSL_ERRATUM_A010539) && defined(CONFIG_QSPI_BOOT) + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + u32 porsr1; + + porsr1 = in_be32(&gur->porsr1); + porsr1 &= ~FSL_CHASSIS2_CCSR_PORSR1_RCW_MASK; + out_be32((void *)(CONFIG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_PORCR1), + porsr1); +#endif +} + void fsl_lsch2_early_init_f(void) { struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; @@ -339,7 +351,9 @@ void fsl_lsch2_early_init_f(void) #endif /* Make SEC reads and writes snoopable */ setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP | - SCFG_SNPCNFGCR_SECWRSNP); + SCFG_SNPCNFGCR_SECWRSNP | + SCFG_SNPCNFGCR_SATARDSNP | + SCFG_SNPCNFGCR_SATAWRSNP); /* * Enable snoop requests and DVM message requests for @@ -352,6 +366,7 @@ void fsl_lsch2_early_init_f(void) erratum_a008850_early(); /* part 1 of 2 */ erratum_a009929(); erratum_a009660(); + erratum_a010539(); } #endif diff --git a/arch/arm/dts/fsl-ls1043a.dtsi b/arch/arm/dts/fsl-ls1043a.dtsi index a8bffba..f038f96 100644 --- a/arch/arm/dts/fsl-ls1043a.dtsi +++ b/arch/arm/dts/fsl-ls1043a.dtsi @@ -215,5 +215,26 @@ big-endian; status = "disabled"; }; + + usb0: usb3@2f00000 { + compatible = "fsl,layerscape-dwc3"; + reg = <0x0 0x2f00000 0x0 0x10000>; + interrupts = <0 60 0x4>; + dr_mode = "host"; + }; + + usb1: usb3@3000000 { + compatible = "fsl,layerscape-dwc3"; + reg = <0x0 0x3000000 0x0 0x10000>; + interrupts = <0 61 0x4>; + dr_mode = "host"; + }; + + usb2: usb3@3100000 { + compatible = "fsl,layerscape-dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <0 63 0x4>; + dr_mode = "host"; + }; }; }; diff --git a/arch/arm/dts/fsl-ls2080a.dtsi b/arch/arm/dts/fsl-ls2080a.dtsi index b308c8b..f76e981 100644 --- a/arch/arm/dts/fsl-ls2080a.dtsi +++ b/arch/arm/dts/fsl-ls2080a.dtsi @@ -75,4 +75,18 @@ reg-names = "QuadSPI", "QuadSPI-memory"; num-cs = <4>; }; + + usb0: usb3@3100000 { + compatible = "fsl,layerscape-dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <0 80 0x4>; /* Level high type */ + dr_mode = "host"; + }; + + usb1: usb3@3110000 { + compatible = "fsl,layerscape-dwc3"; + reg = <0x0 0x3110000 0x0 0x10000>; + interrupts = <0 81 0x4>; /* Level high type */ + dr_mode = "host"; + }; }; diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h index a5c6c4c..4201e0f 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h @@ -12,17 +12,6 @@ #define CONFIG_STANDALONE_LOAD_ADDR 0x80300000 -#ifdef CONFIG_SYS_FSL_DDR4 -#define CONFIG_SYS_FSL_DDRC_GEN4 -#else -#define CONFIG_SYS_FSL_DDRC_ARM_GEN3 /* Enable Freescale ARM DDR3 driver */ -#endif - -#ifndef CONFIG_ARCH_LS1012A -#define CONFIG_SYS_FSL_DDR /* Freescale DDR driver */ -#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0 -#endif - /* * Reserve secure memory * To be aligned with MMU block size @@ -30,14 +19,8 @@ #define CONFIG_SYS_MEM_RESERVE_SECURE (2048 * 1024) /* 2MB */ #ifdef CONFIG_LS2080A -#define CONFIG_MAX_CPUS 16 -#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 -#define CONFIG_NUM_DDR_CONTROLLERS 3 -#define CONFIG_SYS_FSL_HAS_DP_DDR /* Runtime check to confirm */ #define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 4, 4 } #define SRDS_MAX_LANES 8 -#define CONFIG_SYS_FSL_SRDS_1 -#define CONFIG_SYS_FSL_SRDS_2 #define CONFIG_SYS_PAGE_SIZE 0x10000 #ifndef L1_CACHE_BYTES #define L1_CACHE_SHIFT 6 @@ -48,7 +31,6 @@ #define CONFIG_SYS_FSL_OCRAM_SIZE 0x00200000 /* 2M */ /* DDR */ -#define CONFIG_SYS_FSL_DDR_LE #define CONFIG_SYS_LS2_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) #define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_LS2_DDR_BLOCK1_SIZE @@ -152,7 +134,6 @@ #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1 #elif defined(CONFIG_FSL_LSCH2) -#define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_SYS_FSL_SEC_COMPAT 5 #define CONFIG_SYS_FSL_OCRAM_BASE 0x10000000 /* initial RAM */ #define CONFIG_SYS_FSL_OCRAM_SIZE 0x00200000 /* 2M */ @@ -167,17 +148,12 @@ #define CONFIG_SYS_FSL_PEX_LUT_BE #define CONFIG_SYS_FSL_SEC_BE -#define CONFIG_SYS_FSL_SRDS_1 - /* SoC related */ #ifdef CONFIG_LS1043A -#define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FMAN_V3 #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_NUM_FM1_DTSEC 7 #define CONFIG_SYS_NUM_FM1_10GEC 1 -#define CONFIG_SYS_FSL_IFC_BANK_COUNT 4 -#define CONFIG_SYS_FSL_DDR_BE #define CONFIG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) #define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE @@ -206,23 +182,18 @@ #define CONFIG_SYS_FSL_ERRATUM_A009660 #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1 #elif defined(CONFIG_ARCH_LS1012A) -#define CONFIG_MAX_CPUS 1 #undef CONFIG_SYS_FSL_DDRC_ARM_GEN3 #define GICD_BASE 0x01401000 #define GICC_BASE 0x01402000 #elif defined(CONFIG_ARCH_LS1046A) -#define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FMAN_V3 #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_NUM_FM1_DTSEC 8 #define CONFIG_SYS_NUM_FM1_10GEC 2 -#define CONFIG_SYS_FSL_IFC_BANK_COUNT 4 -#define CONFIG_SYS_FSL_DDR_BE #define CONFIG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) #define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE -#define CONFIG_SYS_FSL_SRDS_2 #define CONFIG_SYS_FSL_IFC_BE #define CONFIG_SYS_FSL_SFP_VER_3_2 #define CONFIG_SYS_FSL_SNVS_LE diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h index df51871..d88543d 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h @@ -168,6 +168,8 @@ struct sys_info { (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_JR0_OFFSET) /* Device Configuration and Pin Control */ +#define DCFG_DCSR_PORCR1 0x0 + struct ccsr_gur { u32 porsr1; /* POR status 1 */ #define FSL_CHASSIS2_CCSR_PORSR1_RCW_MASK 0xFF800000 @@ -335,6 +337,8 @@ struct ccsr_gur { #define SCFG_SNPCNFGCR_SECRDSNP 0x80000000 #define SCFG_SNPCNFGCR_SECWRSNP 0x40000000 +#define SCFG_SNPCNFGCR_SATARDSNP 0x00800000 +#define SCFG_SNPCNFGCR_SATAWRSNP 0x00400000 /* Supplemental Configuration Unit */ struct ccsr_scfg { diff --git a/arch/arm/include/asm/arch-fsl-layerscape/mp.h b/arch/arm/include/asm/arch-fsl-layerscape/mp.h index e46e076..f7306ff 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/mp.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/mp.h @@ -34,5 +34,6 @@ void *get_spin_tbl_addr(void); phys_addr_t determine_mp_bootpg(void); void secondary_boot_func(void); int is_core_online(u64 cpu_id); +u32 cpu_pos_mask(void); #endif #endif /* _FSL_LAYERSCAPE_MP_H */ diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h index 4512732..58e90d8 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h @@ -60,9 +60,8 @@ struct cpu_type { /* ahci port register default value */ #define AHCI_PORT_PHY_1_CFG 0xa003fffe -#define AHCI_PORT_PHY_2_CFG 0x28184d1f -#define AHCI_PORT_PHY_3_CFG 0x0e081509 #define AHCI_PORT_TRANS_CFG 0x08000029 +#define AHCI_PORT_AXICC_CFG 0x3fffffff /* AHCI (sata) register map */ struct ccsr_ahci { diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index fab8774..ec65cc0 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -94,14 +94,7 @@ #define CONFIG_SYS_FSL_ERRATUM_A008407 #ifdef CONFIG_DDR_SPD -#define CONFIG_SYS_FSL_DDR_BE #define CONFIG_VERY_BIG_RAM -#ifdef CONFIG_SYS_FSL_DDR4 -#define CONFIG_SYS_FSL_DDRC_GEN4 -#else -#define CONFIG_SYS_FSL_DDRC_ARM_GEN3 -#endif -#define CONFIG_SYS_FSL_DDR #define CONFIG_SYS_LS1_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) #define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_LS1_DDR_BLOCK1_SIZE #endif @@ -120,13 +113,7 @@ #define DCU_LAYER_MAX_NUM 16 -#define CONFIG_SYS_FSL_SRDS_1 - #ifdef CONFIG_LS102XA -#define CONFIG_MAX_CPUS 2 -#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 -#define CONFIG_NUM_DDR_CONTROLLERS 1 -#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0 #define CONFIG_SYS_FSL_SEC_COMPAT 5 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_SYS_FSL_ERRATUM_A008378 |