diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/x86/cpu/quark/hte.c | 396 | ||||
| -rw-r--r-- | arch/x86/cpu/quark/hte.h | 44 | ||||
| -rw-r--r-- | arch/x86/cpu/quark/mrc_util.c | 1475 | ||||
| -rw-r--r-- | arch/x86/cpu/quark/mrc_util.h | 153 |
4 files changed, 2068 insertions, 0 deletions
diff --git a/arch/x86/cpu/quark/hte.c b/arch/x86/cpu/quark/hte.c new file mode 100644 index 0000000..372815d --- /dev/null +++ b/arch/x86/cpu/quark/hte.c @@ -0,0 +1,396 @@ +/* + * Copyright (C) 2013, Intel Corporation + * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> + * + * Ported from Intel released Quark UEFI BIOS + * QuarkSocPkg/QuarkNorthCluster/MemoryInit/Pei + * + * SPDX-License-Identifier: Intel + */ + +#include <common.h> +#include <asm/arch/mrc.h> +#include <asm/arch/msg_port.h> +#include "mrc_util.h" +#include "hte.h" + +/** + * Enable HTE to detect all possible errors for the given training parameters + * (per-bit or full byte lane). + */ +static void hte_enable_all_errors(void) +{ + msg_port_write(HTE, 0x000200A2, 0xFFFFFFFF); + msg_port_write(HTE, 0x000200A3, 0x000000FF); + msg_port_write(HTE, 0x000200A4, 0x00000000); +} + +/** + * Go and read the HTE register in order to find any error + * + * @return: The errors detected in the HTE status register + */ +static u32 hte_check_errors(void) +{ + return msg_port_read(HTE, 0x000200A7); +} + +/** + * Wait until HTE finishes + */ +static void hte_wait_for_complete(void) +{ + u32 tmp; + + ENTERFN(); + + do {} while ((msg_port_read(HTE, 0x00020012) & BIT30) != 0); + + tmp = msg_port_read(HTE, 0x00020011); + tmp |= BIT9; + tmp &= ~(BIT12 | BIT13); + msg_port_write(HTE, 0x00020011, tmp); + + LEAVEFN(); +} + +/** + * Clear registers related with errors in the HTE + */ +static void hte_clear_error_regs(void) +{ + u32 tmp; + + /* + * Clear all HTE errors and enable error checking + * for burst and chunk. + */ + tmp = msg_port_read(HTE, 0x000200A1); + tmp |= BIT8; + msg_port_write(HTE, 0x000200A1, tmp); +} + +/** + * Execute a basic single-cache-line memory write/read/verify test using simple + * constant pattern, different for READ_TRAIN and WRITE_TRAIN modes. + * + * See hte_basic_write_read() which is the external visible wrapper. + * + * @mrc_params: host structure for all MRC global data + * @addr: memory adress being tested (must hit specific channel/rank) + * @first_run: if set then the HTE registers are configured, otherwise it is + * assumed configuration is done and we just re-run the test + * @mode: READ_TRAIN or WRITE_TRAIN (the difference is in the pattern) + * + * @return: byte lane failure on each bit (for Quark only bit0 and bit1) + */ +static u16 hte_basic_data_cmp(struct mrc_params *mrc_params, u32 addr, + u8 first_run, u8 mode) +{ + u32 pattern; + u32 offset; + + if (first_run) { + msg_port_write(HTE, 0x00020020, 0x01B10021); + msg_port_write(HTE, 0x00020021, 0x06000000); + msg_port_write(HTE, 0x00020022, addr >> 6); + msg_port_write(HTE, 0x00020062, 0x00800015); + msg_port_write(HTE, 0x00020063, 0xAAAAAAAA); + msg_port_write(HTE, 0x00020064, 0xCCCCCCCC); + msg_port_write(HTE, 0x00020065, 0xF0F0F0F0); + msg_port_write(HTE, 0x00020061, 0x00030008); + + if (mode == WRITE_TRAIN) + pattern = 0xC33C0000; + else /* READ_TRAIN */ + pattern = 0xAA5555AA; + + for (offset = 0x80; offset <= 0x8F; offset++) + msg_port_write(HTE, offset, pattern); + } + + msg_port_write(HTE, 0x000200A1, 0xFFFF1000); + msg_port_write(HTE, 0x00020011, 0x00011000); + msg_port_write(HTE, 0x00020011, 0x00011100); + + hte_wait_for_complete(); + + /* + * Return bits 15:8 of HTE_CH0_ERR_XSTAT to check for + * any bytelane errors. + */ + return (hte_check_errors() >> 8) & 0xFF; +} + +/** + * Examine a single-cache-line memory with write/read/verify test using multiple + * data patterns (victim-aggressor algorithm). + * + * See hte_write_stress_bit_lanes() which is the external visible wrapper. + * + * @mrc_params: host structure for all MRC global data + * @addr: memory adress being tested (must hit specific channel/rank) + * @loop_cnt: number of test iterations + * @seed_victim: victim data pattern seed + * @seed_aggressor: aggressor data pattern seed + * @victim_bit: should be 0 as auto-rotate feature is in use + * @first_run: if set then the HTE registers are configured, otherwise it is + * assumed configuration is done and we just re-run the test + * + * @return: byte lane failure on each bit (for Quark only bit0 and bit1) + */ +static u16 hte_rw_data_cmp(struct mrc_params *mrc_params, u32 addr, + u8 loop_cnt, u32 seed_victim, u32 seed_aggressor, + u8 victim_bit, u8 first_run) +{ + u32 offset; + u32 tmp; + + if (first_run) { + msg_port_write(HTE, 0x00020020, 0x00910024); + msg_port_write(HTE, 0x00020023, 0x00810024); + msg_port_write(HTE, 0x00020021, 0x06070000); + msg_port_write(HTE, 0x00020024, 0x06070000); + msg_port_write(HTE, 0x00020022, addr >> 6); + msg_port_write(HTE, 0x00020025, addr >> 6); + msg_port_write(HTE, 0x00020062, 0x0000002A); + msg_port_write(HTE, 0x00020063, seed_victim); + msg_port_write(HTE, 0x00020064, seed_aggressor); + msg_port_write(HTE, 0x00020065, seed_victim); + + /* + * Write the pattern buffers to select the victim bit + * + * Start with bit0 + */ + for (offset = 0x80; offset <= 0x8F; offset++) { + if ((offset % 8) == victim_bit) + msg_port_write(HTE, offset, 0x55555555); + else + msg_port_write(HTE, offset, 0xCCCCCCCC); + } + + msg_port_write(HTE, 0x00020061, 0x00000000); + msg_port_write(HTE, 0x00020066, 0x03440000); + msg_port_write(HTE, 0x000200A1, 0xFFFF1000); + } + + tmp = 0x10001000 | (loop_cnt << 16); + msg_port_write(HTE, 0x00020011, tmp); + msg_port_write(HTE, 0x00020011, tmp | BIT8); + + hte_wait_for_complete(); + + /* + * Return bits 15:8 of HTE_CH0_ERR_XSTAT to check for + * any bytelane errors. + */ + return (hte_check_errors() >> 8) & 0xFF; +} + +/** + * Use HW HTE engine to initialize or test all memory attached to a given DUNIT. + * If flag is MRC_MEM_INIT, this routine writes 0s to all memory locations to + * initialize ECC. If flag is MRC_MEM_TEST, this routine will send an 5AA55AA5 + * pattern to all memory locations on the RankMask and then read it back. + * Then it sends an A55AA55A pattern to all memory locations on the RankMask + * and reads it back. + * + * @mrc_params: host structure for all MRC global data + * @flag: MRC_MEM_INIT or MRC_MEM_TEST + * + * @return: errors register showing HTE failures. Also prints out which rank + * failed the HTE test if failure occurs. For rank detection to work, + * the address map must be left in its default state. If MRC changes + * the address map, this function must be modified to change it back + * to default at the beginning, then restore it at the end. + */ +u32 hte_mem_init(struct mrc_params *mrc_params, u8 flag) +{ + u32 offset; + int test_num; + int i; + + /* + * Clear out the error registers at the start of each memory + * init or memory test run. + */ + hte_clear_error_regs(); + + msg_port_write(HTE, 0x00020062, 0x00000015); + + for (offset = 0x80; offset <= 0x8F; offset++) + msg_port_write(HTE, offset, ((offset & 1) ? 0xA55A : 0x5AA5)); + + msg_port_write(HTE, 0x00020021, 0x00000000); + msg_port_write(HTE, 0x00020022, (mrc_params->mem_size >> 6) - 1); + msg_port_write(HTE, 0x00020063, 0xAAAAAAAA); + msg_port_write(HTE, 0x00020064, 0xCCCCCCCC); + msg_port_write(HTE, 0x00020065, 0xF0F0F0F0); + msg_port_write(HTE, 0x00020066, 0x03000000); + + switch (flag) { + case MRC_MEM_INIT: + /* + * Only 1 write pass through memory is needed + * to initialize ECC + */ + test_num = 1; + break; + case MRC_MEM_TEST: + /* Write/read then write/read with inverted pattern */ + test_num = 4; + break; + default: + DPF(D_INFO, "Unknown parameter for flag: %d\n", flag); + return 0xFFFFFFFF; + } + + DPF(D_INFO, "hte_mem_init"); + + for (i = 0; i < test_num; i++) { + DPF(D_INFO, "."); + + if (i == 0) { + msg_port_write(HTE, 0x00020061, 0x00000000); + msg_port_write(HTE, 0x00020020, 0x00110010); + } else if (i == 1) { + msg_port_write(HTE, 0x00020061, 0x00000000); + msg_port_write(HTE, 0x00020020, 0x00010010); + } else if (i == 2) { + msg_port_write(HTE, 0x00020061, 0x00010100); + msg_port_write(HTE, 0x00020020, 0x00110010); + } else { + msg_port_write(HTE, 0x00020061, 0x00010100); + msg_port_write(HTE, 0x00020020, 0x00010010); + } + + msg_port_write(HTE, 0x00020011, 0x00111000); + msg_port_write(HTE, 0x00020011, 0x00111100); + + hte_wait_for_complete(); + + /* If this is a READ pass, check for errors at the end */ + if ((i % 2) == 1) { + /* Return immediately if error */ + if (hte_check_errors()) + break; + } + } + + DPF(D_INFO, "done\n"); + + return hte_check_errors(); +} + +/** + * Execute a basic single-cache-line memory write/read/verify test using simple + * constant pattern, different for READ_TRAIN and WRITE_TRAIN modes. + * + * @mrc_params: host structure for all MRC global data + * @addr: memory adress being tested (must hit specific channel/rank) + * @first_run: if set then the HTE registers are configured, otherwise it is + * assumed configuration is done and we just re-run the test + * @mode: READ_TRAIN or WRITE_TRAIN (the difference is in the pattern) + * + * @return: byte lane failure on each bit (for Quark only bit0 and bit1) + */ +u16 hte_basic_write_read(struct mrc_params *mrc_params, u32 addr, + u8 first_run, u8 mode) +{ + u16 errors; + + ENTERFN(); + + /* Enable all error reporting in preparation for HTE test */ + hte_enable_all_errors(); + hte_clear_error_regs(); + + errors = hte_basic_data_cmp(mrc_params, addr, first_run, mode); + + LEAVEFN(); + + return errors; +} + +/** + * Examine a single-cache-line memory with write/read/verify test using multiple + * data patterns (victim-aggressor algorithm). + * + * @mrc_params: host structure for all MRC global data + * @addr: memory adress being tested (must hit specific channel/rank) + * @first_run: if set then the HTE registers are configured, otherwise it is + * assumed configuration is done and we just re-run the test + * + * @return: byte lane failure on each bit (for Quark only bit0 and bit1) + */ +u16 hte_write_stress_bit_lanes(struct mrc_params *mrc_params, + u32 addr, u8 first_run) +{ + u16 errors; + u8 victim_bit = 0; + + ENTERFN(); + + /* Enable all error reporting in preparation for HTE test */ + hte_enable_all_errors(); + hte_clear_error_regs(); + + /* + * Loop through each bit in the bytelane. + * + * Each pass creates a victim bit while keeping all other bits the same + * as aggressors. AVN HTE adds an auto-rotate feature which allows us + * to program the entire victim/aggressor sequence in 1 step. + * + * The victim bit rotates on each pass so no need to have software + * implement a victim bit loop like on VLV. + */ + errors = hte_rw_data_cmp(mrc_params, addr, HTE_LOOP_CNT, + HTE_LFSR_VICTIM_SEED, HTE_LFSR_AGRESSOR_SEED, + victim_bit, first_run); + + LEAVEFN(); + + return errors; +} + +/** + * Execute a basic single-cache-line memory write or read. + * This is just for receive enable / fine write-levelling purpose. + * + * @addr: memory adress being tested (must hit specific channel/rank) + * @first_run: if set then the HTE registers are configured, otherwise it is + * assumed configuration is done and we just re-run the test + * @is_write: when non-zero memory write operation executed, otherwise read + */ +void hte_mem_op(u32 addr, u8 first_run, u8 is_write) +{ + u32 offset; + u32 tmp; + + hte_enable_all_errors(); + hte_clear_error_regs(); + + if (first_run) { + tmp = is_write ? 0x01110021 : 0x01010021; + msg_port_write(HTE, 0x00020020, tmp); + + msg_port_write(HTE, 0x00020021, 0x06000000); + msg_port_write(HTE, 0x00020022, addr >> 6); + msg_port_write(HTE, 0x00020062, 0x00800015); + msg_port_write(HTE, 0x00020063, 0xAAAAAAAA); + msg_port_write(HTE, 0x00020064, 0xCCCCCCCC); + msg_port_write(HTE, 0x00020065, 0xF0F0F0F0); + msg_port_write(HTE, 0x00020061, 0x00030008); + + for (offset = 0x80; offset <= 0x8F; offset++) + msg_port_write(HTE, offset, 0xC33C0000); + } + + msg_port_write(HTE, 0x000200A1, 0xFFFF1000); + msg_port_write(HTE, 0x00020011, 0x00011000); + msg_port_write(HTE, 0x00020011, 0x00011100); + + hte_wait_for_complete(); +} diff --git a/arch/x86/cpu/quark/hte.h b/arch/x86/cpu/quark/hte.h new file mode 100644 index 0000000..6577796 --- /dev/null +++ b/arch/x86/cpu/quark/hte.h @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2013, Intel Corporation + * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> + * + * Ported from Intel released Quark UEFI BIOS + * QuarkSocPkg/QuarkNorthCluster/MemoryInit/Pei + * + * SPDX-License-Identifier: Intel + */ + +#ifndef _HTE_H_ +#define _HTE_H_ + +enum { + MRC_MEM_INIT, + MRC_MEM_TEST +}; + +enum { + READ_TRAIN, + WRITE_TRAIN +}; + +/* + * EXP_LOOP_CNT field of HTE_CMD_CTL + * + * This CANNOT be less than 4! + */ +#define HTE_LOOP_CNT 5 + +/* random seed for victim */ +#define HTE_LFSR_VICTIM_SEED 0xF294BA21 + +/* random seed for aggressor */ +#define HTE_LFSR_AGRESSOR_SEED 0xEBA7492D + +u32 hte_mem_init(struct mrc_params *mrc_params, u8 flag); +u16 hte_basic_write_read(struct mrc_params *mrc_params, u32 addr, + u8 first_run, u8 mode); +u16 hte_write_stress_bit_lanes(struct mrc_params *mrc_params, + u32 addr, u8 first_run); +void hte_mem_op(u32 addr, u8 first_run, u8 is_write); + +#endif /* _HTE_H_ */ diff --git a/arch/x86/cpu/quark/mrc_util.c b/arch/x86/cpu/quark/mrc_util.c new file mode 100644 index 0000000..3a79ae5 --- /dev/null +++ b/arch/x86/cpu/quark/mrc_util.c @@ -0,0 +1,1475 @@ +/* + * Copyright (C) 2013, Intel Corporation + * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> + * + * Ported from Intel released Quark UEFI BIOS + * QuarkSocPkg/QuarkNorthCluster/MemoryInit/Pei + * + * SPDX-License-Identifier: Intel + */ + +#include <common.h> +#include <asm/arch/device.h> +#include <asm/arch/mrc.h> +#include <asm/arch/msg_port.h> +#include "mrc_util.h" +#include "hte.h" +#include "smc.h" + +static const uint8_t vref_codes[64] = { + /* lowest to highest */ + 0x3F, 0x3E, 0x3D, 0x3C, 0x3B, 0x3A, 0x39, 0x38, + 0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0x30, + 0x2F, 0x2E, 0x2D, 0x2C, 0x2B, 0x2A, 0x29, 0x28, + 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x20, + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1A, 0x1B, 0x1C, 0x1D, 0x1E, 0x1F +}; + +void mrc_write_mask(u32 unit, u32 addr, u32 data, u32 mask) +{ + msg_port_write(unit, addr, + (msg_port_read(unit, addr) & ~(mask)) | + ((data) & (mask))); +} + +void mrc_alt_write_mask(u32 unit, u32 addr, u32 data, u32 mask) +{ + msg_port_alt_write(unit, addr, + (msg_port_alt_read(unit, addr) & ~(mask)) | + ((data) & (mask))); +} + +void mrc_post_code(uint8_t major, uint8_t minor) +{ + /* send message to UART */ + DPF(D_INFO, "POST: 0x%01x%02x\n", major, minor); + + /* error check */ + if (major == 0xee) + hang(); +} + +/* Delay number of nanoseconds */ +void delay_n(uint32_t ns) +{ + /* 1000 MHz clock has 1ns period --> no conversion required */ + uint64_t final_tsc = rdtsc(); + + final_tsc += ((get_tbclk_mhz() * ns) / 1000); + + while (rdtsc() < final_tsc) + ; +} + +/* Delay number of microseconds */ +void delay_u(uint32_t ms) +{ + /* 64-bit math is not an option, just use loops */ + while (ms--) + delay_n(1000); +} + +/* Select Memory Manager as the source for PRI interface */ +void select_mem_mgr(void) +{ + u32 dco; + + ENTERFN(); + + dco = msg_port_read(MEM_CTLR, DCO); + dco &= ~BIT28; + msg_port_write(MEM_CTLR, DCO, dco); + + LEAVEFN(); +} + +/* Select HTE as the source for PRI interface */ +void select_hte(void) +{ + u32 dco; + + ENTERFN(); + + dco = msg_port_read(MEM_CTLR, DCO); + dco |= BIT28; + msg_port_write(MEM_CTLR, DCO, dco); + + LEAVEFN(); +} + +/* + * Send DRAM command + * data should be formated using DCMD_Xxxx macro or emrsXCommand structure + */ +void dram_init_command(uint32_t data) +{ + pci_write_config_dword(QUARK_HOST_BRIDGE, MSG_DATA_REG, data); + pci_write_config_dword(QUARK_HOST_BRIDGE, MSG_CTRL_EXT_REG, 0); + msg_port_setup(MSG_OP_DRAM_INIT, MEM_CTLR, 0); + + DPF(D_REGWR, "WR32 %03X %08X %08X\n", MEM_CTLR, 0, data); +} + +/* Send DRAM wake command using special MCU side-band WAKE opcode */ +void dram_wake_command(void) +{ + ENTERFN(); + + msg_port_setup(MSG_OP_DRAM_WAKE, MEM_CTLR, 0); + + LEAVEFN(); +} + +void training_message(uint8_t channel, uint8_t rank, uint8_t byte_lane) +{ + /* send message to UART */ + DPF(D_INFO, "CH%01X RK%01X BL%01X\n", channel, rank, byte_lane); +} + +/* + * This function will program the RCVEN delays + * + * (currently doesn't comprehend rank) + */ +void set_rcvn(uint8_t channel, uint8_t rank, + uint8_t byte_lane, uint32_t pi_count) +{ + uint32_t reg; + uint32_t msk; + uint32_t temp; + + ENTERFN(); + + DPF(D_TRN, "Rcvn ch%d rnk%d ln%d : pi=%03X\n", + channel, rank, byte_lane, pi_count); + + /* + * RDPTR (1/2 MCLK, 64 PIs) + * BL0 -> B01PTRCTL0[11:08] (0x0-0xF) + * BL1 -> B01PTRCTL0[23:20] (0x0-0xF) + */ + reg = B01PTRCTL0 + ((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + + (channel * DDRIODQ_CH_OFFSET); + msk = (byte_lane & BIT0) ? (BIT23 | BIT22 | BIT21 | BIT20) : + (BIT11 | BIT10 | BIT9 | BIT8); + temp = (byte_lane & BIT0) ? ((pi_count / HALF_CLK) << 20) : + ((pi_count / HALF_CLK) << 8); + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + + /* Adjust PI_COUNT */ + pi_count -= ((pi_count / HALF_CLK) & 0xF) * HALF_CLK; + + /* + * PI (1/64 MCLK, 1 PIs) + * BL0 -> B0DLLPICODER0[29:24] (0x00-0x3F) + * BL1 -> B1DLLPICODER0[29:24] (0x00-0x3F) + */ + reg = (byte_lane & BIT0) ? B1DLLPICODER0 : B0DLLPICODER0; + reg += (((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + + (channel * DDRIODQ_CH_OFFSET)); + msk = (BIT29 | BIT28 | BIT27 | BIT26 | BIT25 | BIT24); + temp = pi_count << 24; + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + + /* + * DEADBAND + * BL0/1 -> B01DBCTL1[08/11] (+1 select) + * BL0/1 -> B01DBCTL1[02/05] (enable) + */ + reg = B01DBCTL1 + ((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + + (channel * DDRIODQ_CH_OFFSET); + msk = 0x00; + temp = 0x00; + + /* enable */ + msk |= (byte_lane & BIT0) ? BIT5 : BIT2; + if ((pi_count < EARLY_DB) || (pi_count > LATE_DB)) + temp |= msk; + + /* select */ + msk |= (byte_lane & BIT0) ? BIT11 : BIT8; + if (pi_count < EARLY_DB) + temp |= msk; + + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + + /* error check */ + if (pi_count > 0x3F) { + training_message(channel, rank, byte_lane); + mrc_post_code(0xee, 0xe0); + } + + LEAVEFN(); +} + +/* + * This function will return the current RCVEN delay on the given + * channel, rank, byte_lane as an absolute PI count. + * + * (currently doesn't comprehend rank) + */ +uint32_t get_rcvn(uint8_t channel, uint8_t rank, uint8_t byte_lane) +{ + uint32_t reg; + uint32_t temp; + uint32_t pi_count; + + ENTERFN(); + + /* + * RDPTR (1/2 MCLK, 64 PIs) + * BL0 -> B01PTRCTL0[11:08] (0x0-0xF) + * BL1 -> B01PTRCTL0[23:20] (0x0-0xF) + */ + reg = B01PTRCTL0 + ((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + + (channel * DDRIODQ_CH_OFFSET); + temp = msg_port_alt_read(DDRPHY, reg); + temp >>= (byte_lane & BIT0) ? 20 : 8; + temp &= 0xF; + + /* Adjust PI_COUNT */ + pi_count = temp * HALF_CLK; + + /* + * PI (1/64 MCLK, 1 PIs) + * BL0 -> B0DLLPICODER0[29:24] (0x00-0x3F) + * BL1 -> B1DLLPICODER0[29:24] (0x00-0x3F) + */ + reg = (byte_lane & BIT0) ? B1DLLPICODER0 : B0DLLPICODER0; + reg += (((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + + (channel * DDRIODQ_CH_OFFSET)); + temp = msg_port_alt_read(DDRPHY, reg); + temp >>= 24; + temp &= 0x3F; + + /* Adjust PI_COUNT */ + pi_count += temp; + + LEAVEFN(); + + return pi_count; +} + +/* + * This function will program the RDQS delays based on an absolute + * amount of PIs. + * + * (currently doesn't comprehend rank) + */ +void set_rdqs(uint8_t channel, uint8_t rank, + uint8_t byte_lane, uint32_t pi_count) +{ + uint32_t reg; + uint32_t msk; + uint32_t temp; + + ENTERFN(); + DPF(D_TRN, "Rdqs ch%d rnk%d ln%d : pi=%03X\n", + channel, rank, byte_lane, pi_count); + + /* + * PI (1/128 MCLK) + * BL0 -> B0RXDQSPICODE[06:00] (0x00-0x47) + * BL1 -> B1RXDQSPICODE[06:00] (0x00-0x47) + */ + reg = (byte_lane & BIT0) ? B1RXDQSPICODE : B0RXDQSPICODE; + reg += (((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + + (channel * DDRIODQ_CH_OFFSET)); + msk = (BIT6 | BIT5 | BIT4 | BIT3 | BIT2 | BIT1 | BIT0); + temp = pi_count << 0; + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + + /* error check (shouldn't go above 0x3F) */ + if (pi_count > 0x47) { + training_message(channel, rank, byte_lane); + mrc_post_code(0xee, 0xe1); + } + + LEAVEFN(); +} + +/* + * This function will return the current RDQS delay on the given + * channel, rank, byte_lane as an absolute PI count. + * + * (currently doesn't comprehend rank) + */ +uint32_t get_rdqs(uint8_t channel, uint8_t rank, uint8_t byte_lane) +{ + uint32_t reg; + uint32_t temp; + uint32_t pi_count; + + ENTERFN(); + + /* + * PI (1/128 MCLK) + * BL0 -> B0RXDQSPICODE[06:00] (0x00-0x47) + * BL1 -> B1RXDQSPICODE[06:00] (0x00-0x47) + */ + reg = (byte_lane & BIT0) ? B1RXDQSPICODE : B0RXDQSPICODE; + reg += (((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + + (channel * DDRIODQ_CH_OFFSET)); + temp = msg_port_alt_read(DDRPHY, reg); + + /* Adjust PI_COUNT */ + pi_count = temp & 0x7F; + + LEAVEFN(); + + return pi_count; +} + +/* + * This function will program the WDQS delays based on an absolute + * amount of PIs. + * + * (currently doesn't comprehend rank) + */ +void set_wdqs(uint8_t channel, uint8_t rank, + uint8_t byte_lane, uint32_t pi_count) +{ + uint32_t reg; + uint32_t msk; + uint32_t temp; + + ENTERFN(); + + DPF(D_TRN, "Wdqs ch%d rnk%d ln%d : pi=%03X\n", + channel, rank, byte_lane, pi_count); + + /* + * RDPTR (1/2 MCLK, 64 PIs) + * BL0 -> B01PTRCTL0[07:04] (0x0-0xF) + * BL1 -> B01PTRCTL0[19:16] (0x0-0xF) + */ + reg = B01PTRCTL0 + ((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + + (channel * DDRIODQ_CH_OFFSET); + msk = (byte_lane & BIT0) ? (BIT19 | BIT18 | BIT17 | BIT16) : + (BIT7 | BIT6 | BIT5 | BIT4); + temp = pi_count / HALF_CLK; + temp <<= (byte_lane & BIT0) ? 16 : 4; + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + + /* Adjust PI_COUNT */ + pi_count -= ((pi_count / HALF_CLK) & 0xF) * HALF_CLK; + + /* + * PI (1/64 MCLK, 1 PIs) + * BL0 -> B0DLLPICODER0[21:16] (0x00-0x3F) + * BL1 -> B1DLLPICODER0[21:16] (0x00-0x3F) + */ + reg = (byte_lane & BIT0) ? B1DLLPICODER0 : B0DLLPICODER0; + reg += (((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + + (channel * DDRIODQ_CH_OFFSET)); + msk = (BIT21 | BIT20 | BIT19 | BIT18 | BIT17 | BIT16); + temp = pi_count << 16; + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + + /* + * DEADBAND + * BL0/1 -> B01DBCTL1[07/10] (+1 select) + * BL0/1 -> B01DBCTL1[01/04] (enable) + */ + reg = B01DBCTL1 + ((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + + (channel * DDRIODQ_CH_OFFSET); + msk = 0x00; + temp = 0x00; + + /* enable */ + msk |= (byte_lane & BIT0) ? BIT4 : BIT1; + if ((pi_count < EARLY_DB) || (pi_count > LATE_DB)) + temp |= msk; + + /* select */ + msk |= (byte_lane & BIT0) ? BIT10 : BIT7; + if (pi_count < EARLY_DB) + temp |= msk; + + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + + /* error check */ + if (pi_count > 0x3F) { + training_message(channel, rank, byte_lane); + mrc_post_code(0xee, 0xe2); + } + + LEAVEFN(); +} + +/* + * This function will return the amount of WDQS delay on the given + * channel, rank, byte_lane as an absolute PI count. + * + * (currently doesn't comprehend rank) + */ +uint32_t get_wdqs(uint8_t channel, uint8_t rank, uint8_t byte_lane) +{ + uint32_t reg; + uint32_t temp; + uint32_t pi_count; + + ENTERFN(); + + /* + * RDPTR (1/2 MCLK, 64 PIs) + * BL0 -> B01PTRCTL0[07:04] (0x0-0xF) + * BL1 -> B01PTRCTL0[19:16] (0x0-0xF) + */ + reg = B01PTRCTL0 + ((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + + (channel * DDRIODQ_CH_OFFSET); + temp = msg_port_alt_read(DDRPHY, reg); + temp >>= (byte_lane & BIT0) ? 16 : 4; + temp &= 0xF; + + /* Adjust PI_COUNT */ + pi_count = (temp * HALF_CLK); + + /* + * PI (1/64 MCLK, 1 PIs) + * BL0 -> B0DLLPICODER0[21:16] (0x00-0x3F) + * BL1 -> B1DLLPICODER0[21:16] (0x00-0x3F) + */ + reg = (byte_lane & BIT0) ? B1DLLPICODER0 : B0DLLPICODER0; + reg += (((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + + (channel * DDRIODQ_CH_OFFSET)); + temp = msg_port_alt_read(DDRPHY, reg); + temp >>= 16; + temp &= 0x3F; + + /* Adjust PI_COUNT */ + pi_count += temp; + + LEAVEFN(); + + return pi_count; +} + +/* + * This function will program the WDQ delays based on an absolute + * number of PIs. + * + * (currently doesn't comprehend rank) + */ +void set_wdq(uint8_t channel, uint8_t rank, + uint8_t byte_lane, uint32_t pi_count) +{ + uint32_t reg; + uint32_t msk; + uint32_t temp; + + ENTERFN(); + + DPF(D_TRN, "Wdq ch%d rnk%d ln%d : pi=%03X\n", + channel, rank, byte_lane, pi_count); + + /* + * RDPTR (1/2 MCLK, 64 PIs) + * BL0 -> B01PTRCTL0[03:00] (0x0-0xF) + * BL1 -> B01PTRCTL0[15:12] (0x0-0xF) + */ + reg = B01PTRCTL0 + ((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + + (channel * DDRIODQ_CH_OFFSET); + msk = (byte_lane & BIT0) ? (BIT15 | BIT14 | BIT13 | BIT12) : + (BIT3 | BIT2 | BIT1 | BIT0); + temp = pi_count / HALF_CLK; + temp <<= (byte_lane & BIT0) ? 12 : 0; + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + + /* Adjust PI_COUNT */ + pi_count -= ((pi_count / HALF_CLK) & 0xF) * HALF_CLK; + + /* + * PI (1/64 MCLK, 1 PIs) + * BL0 -> B0DLLPICODER0[13:08] (0x00-0x3F) + * BL1 -> B1DLLPICODER0[13:08] (0x00-0x3F) + */ + reg = (byte_lane & BIT0) ? B1DLLPICODER0 : B0DLLPICODER0; + reg += (((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + + (channel * DDRIODQ_CH_OFFSET)); + msk = (BIT13 | BIT12 | BIT11 | BIT10 | BIT9 | BIT8); + temp = pi_count << 8; + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + + /* + * DEADBAND + * BL0/1 -> B01DBCTL1[06/09] (+1 select) + * BL0/1 -> B01DBCTL1[00/03] (enable) + */ + reg = B01DBCTL1 + ((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + + (channel * DDRIODQ_CH_OFFSET); + msk = 0x00; + temp = 0x00; + + /* enable */ + msk |= (byte_lane & BIT0) ? BIT3 : BIT0; + if ((pi_count < EARLY_DB) || (pi_count > LATE_DB)) + temp |= msk; + + /* select */ + msk |= (byte_lane & BIT0) ? BIT9 : BIT6; + if (pi_count < EARLY_DB) + temp |= msk; + + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + + /* error check */ + if (pi_count > 0x3F) { + training_message(channel, rank, byte_lane); + mrc_post_code(0xee, 0xe3); + } + + LEAVEFN(); +} + +/* + * This function will return the amount of WDQ delay on the given + * channel, rank, byte_lane as an absolute PI count. + * + * (currently doesn't comprehend rank) + */ +uint32_t get_wdq(uint8_t channel, uint8_t rank, uint8_t byte_lane) +{ + uint32_t reg; + uint32_t temp; + uint32_t pi_count; + + ENTERFN(); + + /* + * RDPTR (1/2 MCLK, 64 PIs) + * BL0 -> B01PTRCTL0[03:00] (0x0-0xF) + * BL1 -> B01PTRCTL0[15:12] (0x0-0xF) + */ + reg = B01PTRCTL0 + ((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + + (channel * DDRIODQ_CH_OFFSET); + temp = msg_port_alt_read(DDRPHY, reg); + temp >>= (byte_lane & BIT0) ? (12) : (0); + temp &= 0xF; + + /* Adjust PI_COUNT */ + pi_count = temp * HALF_CLK; + + /* + * PI (1/64 MCLK, 1 PIs) + * BL0 -> B0DLLPICODER0[13:08] (0x00-0x3F) + * BL1 -> B1DLLPICODER0[13:08] (0x00-0x3F) + */ + reg = (byte_lane & BIT0) ? B1DLLPICODER0 : B0DLLPICODER0; + reg += (((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + + (channel * DDRIODQ_CH_OFFSET)); + temp = msg_port_alt_read(DDRPHY, reg); + temp >>= 8; + temp &= 0x3F; + + /* Adjust PI_COUNT */ + pi_count += temp; + + LEAVEFN(); + + return pi_count; +} + +/* + * This function will program the WCMD delays based on an absolute + * number of PIs. + */ +void set_wcmd(uint8_t channel, uint32_t pi_count) +{ + uint32_t reg; + uint32_t msk; + uint32_t temp; + + ENTERFN(); + + /* + * RDPTR (1/2 MCLK, 64 PIs) + * CMDPTRREG[11:08] (0x0-0xF) + */ + reg = CMDPTRREG + (channel * DDRIOCCC_CH_OFFSET); + msk = (BIT11 | BIT10 | BIT9 | BIT8); + temp = pi_count / HALF_CLK; + temp <<= 8; + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + + /* Adjust PI_COUNT */ + pi_count -= ((pi_count / HALF_CLK) & 0xF) * HALF_CLK; + + /* + * PI (1/64 MCLK, 1 PIs) + * CMDDLLPICODER0[29:24] -> CMDSLICE R3 (unused) + * CMDDLLPICODER0[21:16] -> CMDSLICE L3 (unused) + * CMDDLLPICODER0[13:08] -> CMDSLICE R2 (unused) + * CMDDLLPICODER0[05:00] -> CMDSLICE L2 (unused) + * CMDDLLPICODER1[29:24] -> CMDSLICE R1 (unused) + * CMDDLLPICODER1[21:16] -> CMDSLICE L1 (0x00-0x3F) + * CMDDLLPICODER1[13:08] -> CMDSLICE R0 (unused) + * CMDDLLPICODER1[05:00] -> CMDSLICE L0 (unused) + */ + reg = CMDDLLPICODER1 + (channel * DDRIOCCC_CH_OFFSET); + + msk = (BIT29 | BIT28 | BIT27 | BIT26 | BIT25 | BIT24 | + BIT21 | BIT20 | BIT19 | BIT18 | BIT17 | BIT16 | + BIT13 | BIT12 | BIT11 | BIT10 | BIT9 | BIT8 | + BIT5 | BIT4 | BIT3 | BIT2 | BIT1 | BIT0); + + temp = (pi_count << 24) | (pi_count << 16) | + (pi_count << 8) | (pi_count << 0); + + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + reg = CMDDLLPICODER0 + (channel * DDRIOCCC_CH_OFFSET); /* PO */ + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + + /* + * DEADBAND + * CMDCFGREG0[17] (+1 select) + * CMDCFGREG0[16] (enable) + */ + reg = CMDCFGREG0 + (channel * DDRIOCCC_CH_OFFSET); + msk = 0x00; + temp = 0x00; + + /* enable */ + msk |= BIT16; + if ((pi_count < EARLY_DB) || (pi_count > LATE_DB)) + temp |= msk; + + /* select */ + msk |= BIT17; + if (pi_count < EARLY_DB) + temp |= msk; + + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + + /* error check */ + if (pi_count > 0x3F) + mrc_post_code(0xee, 0xe4); + + LEAVEFN(); +} + +/* + * This function will return the amount of WCMD delay on the given + * channel as an absolute PI count. + */ +uint32_t get_wcmd(uint8_t channel) +{ + uint32_t reg; + uint32_t temp; + uint32_t pi_count; + + ENTERFN(); + + /* + * RDPTR (1/2 MCLK, 64 PIs) + * CMDPTRREG[11:08] (0x0-0xF) + */ + reg = CMDPTRREG + (channel * DDRIOCCC_CH_OFFSET); + temp = msg_port_alt_read(DDRPHY, reg); + temp >>= 8; + temp &= 0xF; + + /* Adjust PI_COUNT */ + pi_count = temp * HALF_CLK; + + /* + * PI (1/64 MCLK, 1 PIs) + * CMDDLLPICODER0[29:24] -> CMDSLICE R3 (unused) + * CMDDLLPICODER0[21:16] -> CMDSLICE L3 (unused) + * CMDDLLPICODER0[13:08] -> CMDSLICE R2 (unused) + * CMDDLLPICODER0[05:00] -> CMDSLICE L2 (unused) + * CMDDLLPICODER1[29:24] -> CMDSLICE R1 (unused) + * CMDDLLPICODER1[21:16] -> CMDSLICE L1 (0x00-0x3F) + * CMDDLLPICODER1[13:08] -> CMDSLICE R0 (unused) + * CMDDLLPICODER1[05:00] -> CMDSLICE L0 (unused) + */ + reg = CMDDLLPICODER1 + (channel * DDRIOCCC_CH_OFFSET); + temp = msg_port_alt_read(DDRPHY, reg); + temp >>= 16; + temp &= 0x3F; + + /* Adjust PI_COUNT */ + pi_count += temp; + + LEAVEFN(); + + return pi_count; +} + +/* + * This function will program the WCLK delays based on an absolute + * number of PIs. + */ +void set_wclk(uint8_t channel, uint8_t rank, uint32_t pi_count) +{ + uint32_t reg; + uint32_t msk; + uint32_t temp; + + ENTERFN(); + + /* + * RDPTR (1/2 MCLK, 64 PIs) + * CCPTRREG[15:12] -> CLK1 (0x0-0xF) + * CCPTRREG[11:08] -> CLK0 (0x0-0xF) + */ + reg = CCPTRREG + (channel * DDRIOCCC_CH_OFFSET); + msk = (BIT15 | BIT14 | BIT13 | BIT12 | BIT11 | BIT10 | BIT9 | BIT8); + temp = ((pi_count / HALF_CLK) << 12) | ((pi_count / HALF_CLK) << 8); + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + + /* Adjust PI_COUNT */ + pi_count -= ((pi_count / HALF_CLK) & 0xF) * HALF_CLK; + + /* + * PI (1/64 MCLK, 1 PIs) + * ECCB1DLLPICODER0[13:08] -> CLK0 (0x00-0x3F) + * ECCB1DLLPICODER0[21:16] -> CLK1 (0x00-0x3F) + */ + reg = rank ? ECCB1DLLPICODER0 : ECCB1DLLPICODER0; + reg += (channel * DDRIOCCC_CH_OFFSET); + msk = (BIT21 | BIT20 | BIT19 | BIT18 | BIT17 | BIT16 | + BIT13 | BIT12 | BIT11 | BIT10 | BIT9 | BIT8); + temp = (pi_count << 16) | (pi_count << 8); + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + reg = rank ? ECCB1DLLPICODER1 : ECCB1DLLPICODER1; + reg += (channel * DDRIOCCC_CH_OFFSET); + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + reg = rank ? ECCB1DLLPICODER2 : ECCB1DLLPICODER2; + reg += (channel * DDRIOCCC_CH_OFFSET); + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + reg = rank ? ECCB1DLLPICODER3 : ECCB1DLLPICODER3; + reg += (channel * DDRIOCCC_CH_OFFSET); + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + + /* + * DEADBAND + * CCCFGREG1[11:08] (+1 select) + * CCCFGREG1[03:00] (enable) + */ + reg = CCCFGREG1 + (channel * DDRIOCCC_CH_OFFSET); + msk = 0x00; + temp = 0x00; + + /* enable */ + msk |= (BIT3 | BIT2 | BIT1 | BIT0); + if ((pi_count < EARLY_DB) || (pi_count > LATE_DB)) + temp |= msk; + + /* select */ + msk |= (BIT11 | BIT10 | BIT9 | BIT8); + if (pi_count < EARLY_DB) + temp |= msk; + + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + + /* error check */ + if (pi_count > 0x3F) + mrc_post_code(0xee, 0xe5); + + LEAVEFN(); +} + +/* + * This function will return the amout of WCLK delay on the given + * channel, rank as an absolute PI count. + */ +uint32_t get_wclk(uint8_t channel, uint8_t rank) +{ + uint32_t reg; + uint32_t temp; + uint32_t pi_count; + + ENTERFN(); + + /* + * RDPTR (1/2 MCLK, 64 PIs) + * CCPTRREG[15:12] -> CLK1 (0x0-0xF) + * CCPTRREG[11:08] -> CLK0 (0x0-0xF) + */ + reg = CCPTRREG + (channel * DDRIOCCC_CH_OFFSET); + temp = msg_port_alt_read(DDRPHY, reg); + temp >>= rank ? 12 : 8; + temp &= 0xF; + + /* Adjust PI_COUNT */ + pi_count = temp * HALF_CLK; + + /* + * PI (1/64 MCLK, 1 PIs) + * ECCB1DLLPICODER0[13:08] -> CLK0 (0x00-0x3F) + * ECCB1DLLPICODER0[21:16] -> CLK1 (0x00-0x3F) + */ + reg = rank ? ECCB1DLLPICODER0 : ECCB1DLLPICODER0; + reg += (channel * DDRIOCCC_CH_OFFSET); + temp = msg_port_alt_read(DDRPHY, reg); + temp >>= rank ? 16 : 8; + temp &= 0x3F; + + pi_count += temp; + + LEAVEFN(); + + return pi_count; +} + +/* + * This function will program the WCTL delays based on an absolute + * number of PIs. + * + * (currently doesn't comprehend rank) + */ +void set_wctl(uint8_t channel, uint8_t rank, uint32_t pi_count) +{ + uint32_t reg; + uint32_t msk; + uint32_t temp; + + ENTERFN(); + + /* + * RDPTR (1/2 MCLK, 64 PIs) + * CCPTRREG[31:28] (0x0-0xF) + * CCPTRREG[27:24] (0x0-0xF) + */ + reg = CCPTRREG + (channel * DDRIOCCC_CH_OFFSET); + msk = (BIT31 | BIT30 | BIT29 | BIT28 | BIT27 | BIT26 | BIT25 | BIT24); + temp = ((pi_count / HALF_CLK) << 28) | ((pi_count / HALF_CLK) << 24); + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + + /* Adjust PI_COUNT */ + pi_count -= ((pi_count / HALF_CLK) & 0xF) * HALF_CLK; + + /* + * PI (1/64 MCLK, 1 PIs) + * ECCB1DLLPICODER?[29:24] (0x00-0x3F) + * ECCB1DLLPICODER?[29:24] (0x00-0x3F) + */ + reg = ECCB1DLLPICODER0 + (channel * DDRIOCCC_CH_OFFSET); + msk = (BIT29 | BIT28 | BIT27 | BIT26 | BIT25 | BIT24); + temp = (pi_count << 24); + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + reg = ECCB1DLLPICODER1 + (channel * DDRIOCCC_CH_OFFSET); + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + reg = ECCB1DLLPICODER2 + (channel * DDRIOCCC_CH_OFFSET); + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + reg = ECCB1DLLPICODER3 + (channel * DDRIOCCC_CH_OFFSET); + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + + /* + * DEADBAND + * CCCFGREG1[13:12] (+1 select) + * CCCFGREG1[05:04] (enable) + */ + reg = CCCFGREG1 + (channel * DDRIOCCC_CH_OFFSET); + msk = 0x00; + temp = 0x00; + + /* enable */ + msk |= (BIT5 | BIT4); + if ((pi_count < EARLY_DB) || (pi_count > LATE_DB)) + temp |= msk; + + /* select */ + msk |= (BIT13 | BIT12); + if (pi_count < EARLY_DB) + temp |= msk; + + mrc_alt_write_mask(DDRPHY, reg, temp, msk); + + /* error check */ + if (pi_count > 0x3F) + mrc_post_code(0xee, 0xe6); + + LEAVEFN(); +} + +/* + * This function will return the amount of WCTL delay on the given + * channel, rank as an absolute PI count. + * + * (currently doesn't comprehend rank) + */ +uint32_t get_wctl(uint8_t channel, uint8_t rank) +{ + uint32_t reg; + uint32_t temp; + uint32_t pi_count; + + ENTERFN(); + + /* + * RDPTR (1/2 MCLK, 64 PIs) + * CCPTRREG[31:28] (0x0-0xF) + * CCPTRREG[27:24] (0x0-0xF) + */ + reg = CCPTRREG + (channel * DDRIOCCC_CH_OFFSET); + temp = msg_port_alt_read(DDRPHY, reg); + temp >>= 24; + temp &= 0xF; + + /* Adjust PI_COUNT */ + pi_count = temp * HALF_CLK; + + /* + * PI (1/64 MCLK, 1 PIs) + * ECCB1DLLPICODER?[29:24] (0x00-0x3F) + * ECCB1DLLPICODER?[29:24] (0x00-0x3F) + */ + reg = ECCB1DLLPICODER0 + (channel * DDRIOCCC_CH_OFFSET); + temp = msg_port_alt_read(DDRPHY, reg); + temp >>= 24; + temp &= 0x3F; + + /* Adjust PI_COUNT */ + pi_count += temp; + + LEAVEFN(); + + return pi_count; +} + +/* + * This function will program the internal Vref setting in a given + * byte lane in a given channel. + */ +void set_vref(uint8_t channel, uint8_t byte_lane, uint32_t setting) +{ + uint32_t reg = (byte_lane & 0x1) ? (B1VREFCTL) : (B0VREFCTL); + + ENTERFN(); + + DPF(D_TRN, "Vref ch%d ln%d : val=%03X\n", + channel, byte_lane, setting); + + mrc_alt_write_mask(DDRPHY, (reg + (channel * DDRIODQ_CH_OFFSET) + + ((byte_lane >> 1) * DDRIODQ_BL_OFFSET)), + (vref_codes[setting] << 2), + (BIT7 | BIT6 | BIT5 | BIT4 | BIT3 | BIT2)); + + /* + * need to wait ~300ns for Vref to settle + * (check that this is necessary) + */ + delay_n(300); + + /* ??? may need to clear pointers ??? */ + + LEAVEFN(); +} + +/* + * This function will return the internal Vref setting for the given + * channel, byte_lane. + */ +uint32_t get_vref(uint8_t channel, uint8_t byte_lane) +{ + uint8_t j; + uint32_t ret_val = sizeof(vref_codes) / 2; + uint32_t reg = (byte_lane & 0x1) ? (B1VREFCTL) : (B0VREFCTL); + uint32_t temp; + + ENTERFN(); + + temp = msg_port_alt_read(DDRPHY, (reg + (channel * DDRIODQ_CH_OFFSET) + + ((byte_lane >> 1) * DDRIODQ_BL_OFFSET))); + temp >>= 2; + temp &= 0x3F; + + for (j = 0; j < sizeof(vref_codes); j++) { + if (vref_codes[j] == temp) { + ret_val = j; + break; + } + } + + LEAVEFN(); + + return ret_val; +} + +/* + * This function will return a 32-bit address in the desired + * channel and rank. + */ +uint32_t get_addr(uint8_t channel, uint8_t rank) +{ + uint32_t offset = 0x02000000; /* 32MB */ + + /* Begin product specific code */ + if (channel > 0) { + DPF(D_ERROR, "ILLEGAL CHANNEL\n"); + DEAD_LOOP(); + } + + if (rank > 1) { + DPF(D_ERROR, "ILLEGAL RANK\n"); + DEAD_LOOP(); + } + + /* use 256MB lowest density as per DRP == 0x0003 */ + offset += rank * (256 * 1024 * 1024); + + return offset; +} + +/* + * This function will sample the DQTRAINSTS registers in the given + * channel/rank SAMPLE_SIZE times looking for a valid '0' or '1'. + * + * It will return an encoded 32-bit date in which each bit corresponds to + * the sampled value on the byte lane. + */ +uint32_t sample_dqs(struct mrc_params *mrc_params, uint8_t channel, + uint8_t rank, bool rcvn) +{ + uint8_t j; /* just a counter */ + uint8_t bl; /* which BL in the module (always 2 per module) */ + uint8_t bl_grp; /* which BL module */ + /* byte lane divisor */ + uint8_t bl_divisor = (mrc_params->channel_width == X16) ? 2 : 1; + uint32_t msk[2]; /* BLx in module */ + /* DQTRAINSTS register contents for each sample */ + uint32_t sampled_val[SAMPLE_SIZE]; + uint32_t num_0s; /* tracks the number of '0' samples */ + uint32_t num_1s; /* tracks the number of '1' samples */ + uint32_t ret_val = 0x00; /* assume all '0' samples */ + uint32_t address = get_addr(channel, rank); + + /* initialise msk[] */ + msk[0] = rcvn ? BIT1 : BIT9; /* BL0 */ + msk[1] = rcvn ? BIT0 : BIT8; /* BL1 */ + + /* cycle through each byte lane group */ + for (bl_grp = 0; bl_grp < (NUM_BYTE_LANES / bl_divisor) / 2; bl_grp++) { + /* take SAMPLE_SIZE samples */ + for (j = 0; j < SAMPLE_SIZE; j++) { + hte_mem_op(address, mrc_params->first_run, + rcvn ? 0 : 1); + mrc_params->first_run = 0; + + /* + * record the contents of the proper + * DQTRAINSTS register + */ + sampled_val[j] = msg_port_alt_read(DDRPHY, + (DQTRAINSTS + + (bl_grp * DDRIODQ_BL_OFFSET) + + (channel * DDRIODQ_CH_OFFSET))); + } + + /* + * look for a majority value (SAMPLE_SIZE / 2) + 1 + * on the byte lane and set that value in the corresponding + * ret_val bit + */ + for (bl = 0; bl < 2; bl++) { + num_0s = 0x00; /* reset '0' tracker for byte lane */ + num_1s = 0x00; /* reset '1' tracker for byte lane */ + for (j = 0; j < SAMPLE_SIZE; j++) { + if (sampled_val[j] & msk[bl]) + num_1s++; + else + num_0s++; + } + if (num_1s > num_0s) + ret_val |= (1 << (bl + (bl_grp * 2))); + } + } + + /* + * "ret_val.0" contains the status of BL0 + * "ret_val.1" contains the status of BL1 + * "ret_val.2" contains the status of BL2 + * etc. + */ + return ret_val; +} + +/* This function will find the rising edge transition on RCVN or WDQS */ +void find_rising_edge(struct mrc_params *mrc_params, uint32_t delay[], + uint8_t channel, uint8_t rank, bool rcvn) +{ + bool all_edges_found; /* determines stop condition */ + bool direction[NUM_BYTE_LANES]; /* direction indicator */ + uint8_t sample; /* sample counter */ + uint8_t bl; /* byte lane counter */ + /* byte lane divisor */ + uint8_t bl_divisor = (mrc_params->channel_width == X16) ? 2 : 1; + uint32_t sample_result[SAMPLE_CNT]; /* results of sample_dqs() */ + uint32_t temp; + uint32_t transition_pattern; + + ENTERFN(); + + /* select hte and request initial configuration */ + select_hte(); + mrc_params->first_run = 1; + + /* Take 3 sample points (T1,T2,T3) to obtain a transition pattern */ + for (sample = 0; sample < SAMPLE_CNT; sample++) { + /* program the desired delays for sample */ + for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl++) { + /* increase sample delay by 26 PI (0.2 CLK) */ + if (rcvn) { + set_rcvn(channel, rank, bl, + delay[bl] + (sample * SAMPLE_DLY)); + } else { + set_wdqs(channel, rank, bl, + delay[bl] + (sample * SAMPLE_DLY)); + } + } + + /* take samples (Tsample_i) */ + sample_result[sample] = sample_dqs(mrc_params, + channel, rank, rcvn); + + DPF(D_TRN, + "Find rising edge %s ch%d rnk%d: #%d dly=%d dqs=%02X\n", + (rcvn ? "RCVN" : "WDQS"), channel, rank, sample, + sample * SAMPLE_DLY, sample_result[sample]); + } + + /* + * This pattern will help determine where we landed and ultimately + * how to place RCVEN/WDQS. + */ + for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl++) { + /* build transition_pattern (MSB is 1st sample) */ + transition_pattern = 0; + for (sample = 0; sample < SAMPLE_CNT; sample++) { + transition_pattern |= + ((sample_result[sample] & (1 << bl)) >> bl) << + (SAMPLE_CNT - 1 - sample); + } + + DPF(D_TRN, "=== transition pattern %d\n", transition_pattern); + + /* + * set up to look for rising edge based on + * transition_pattern + */ + switch (transition_pattern) { + case 0: /* sampled 0->0->0 */ + /* move forward from T3 looking for 0->1 */ + delay[bl] += 2 * SAMPLE_DLY; + direction[bl] = FORWARD; + break; + case 1: /* sampled 0->0->1 */ + case 5: /* sampled 1->0->1 (bad duty cycle) *HSD#237503* */ + /* move forward from T2 looking for 0->1 */ + delay[bl] += 1 * SAMPLE_DLY; + direction[bl] = FORWARD; + break; + case 2: /* sampled 0->1->0 (bad duty cycle) *HSD#237503* */ + case 3: /* sampled 0->1->1 */ + /* move forward from T1 looking for 0->1 */ + delay[bl] += 0 * SAMPLE_DLY; + direction[bl] = FORWARD; + break; + case 4: /* sampled 1->0->0 (assumes BL8, HSD#234975) */ + /* move forward from T3 looking for 0->1 */ + delay[bl] += 2 * SAMPLE_DLY; + direction[bl] = FORWARD; + break; + case 6: /* sampled 1->1->0 */ + case 7: /* sampled 1->1->1 */ + /* move backward from T1 looking for 1->0 */ + delay[bl] += 0 * SAMPLE_DLY; + direction[bl] = BACKWARD; + break; + default: + mrc_post_code(0xee, 0xee); + break; + } + + /* program delays */ + if (rcvn) + set_rcvn(channel, rank, bl, delay[bl]); + else + set_wdqs(channel, rank, bl, delay[bl]); + } + + /* + * Based on the observed transition pattern on the byte lane, + * begin looking for a rising edge with single PI granularity. + */ + do { + all_edges_found = true; /* assume all byte lanes passed */ + /* take a sample */ + temp = sample_dqs(mrc_params, channel, rank, rcvn); + /* check all each byte lane for proper edge */ + for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl++) { + if (temp & (1 << bl)) { + /* sampled "1" */ + if (direction[bl] == BACKWARD) { + /* + * keep looking for edge + * on this byte lane + */ + all_edges_found = false; + delay[bl] -= 1; + if (rcvn) { + set_rcvn(channel, rank, + bl, delay[bl]); + } else { + set_wdqs(channel, rank, + bl, delay[bl]); + } + } + } else { + /* sampled "0" */ + if (direction[bl] == FORWARD) { + /* + * keep looking for edge + * on this byte lane + */ + all_edges_found = false; + delay[bl] += 1; + if (rcvn) { + set_rcvn(channel, rank, + bl, delay[bl]); + } else { + set_wdqs(channel, rank, + bl, delay[bl]); + } + } + } + } + } while (!all_edges_found); + + /* restore DDR idle state */ + dram_init_command(DCMD_PREA(rank)); + + DPF(D_TRN, "Delay %03X %03X %03X %03X\n", + delay[0], delay[1], delay[2], delay[3]); + + LEAVEFN(); +} + +/* + * This function will return a 32 bit mask that will be used to + * check for byte lane failures. + */ +uint32_t byte_lane_mask(struct mrc_params *mrc_params) +{ + uint32_t j; + uint32_t ret_val = 0x00; + + /* + * set ret_val based on NUM_BYTE_LANES such that you will check + * only BL0 in result + * + * (each bit in result represents a byte lane) + */ + for (j = 0; j < MAX_BYTE_LANES; j += NUM_BYTE_LANES) + ret_val |= (1 << ((j / NUM_BYTE_LANES) * NUM_BYTE_LANES)); + + /* + * HSD#235037 + * need to adjust the mask for 16-bit mode + */ + if (mrc_params->channel_width == X16) + ret_val |= (ret_val << 2); + + return ret_val; +} + +/* + * Check memory executing simple write/read/verify at the specified address. + * + * Bits in the result indicate failure on specific byte lane. + */ +uint32_t check_rw_coarse(struct mrc_params *mrc_params, uint32_t address) +{ + uint32_t result = 0; + uint8_t first_run = 0; + + if (mrc_params->hte_setup) { + mrc_params->hte_setup = 0; + first_run = 1; + select_hte(); + } + + result = hte_basic_write_read(mrc_params, address, first_run, + WRITE_TRAIN); + + DPF(D_TRN, "check_rw_coarse result is %x\n", result); + + return result; +} + +/* + * Check memory executing write/read/verify of many data patterns + * at the specified address. Bits in the result indicate failure + * on specific byte lane. + */ +uint32_t check_bls_ex(struct mrc_params *mrc_params, uint32_t address) +{ + uint32_t result; + uint8_t first_run = 0; + + if (mrc_params->hte_setup) { + mrc_params->hte_setup = 0; + first_run = 1; + select_hte(); + } + + result = hte_write_stress_bit_lanes(mrc_params, address, first_run); + + DPF(D_TRN, "check_bls_ex result is %x\n", result); + + return result; +} + +/* + * 32-bit LFSR with characteristic polynomial: X^32 + X^22 +X^2 + X^1 + * + * The function takes pointer to previous 32 bit value and + * modifies it to next value. + */ +void lfsr32(uint32_t *lfsr_ptr) +{ + uint32_t bit; + uint32_t lfsr; + int i; + + lfsr = *lfsr_ptr; + + for (i = 0; i < 32; i++) { + bit = 1 ^ (lfsr & BIT0); + bit = bit ^ ((lfsr & BIT1) >> 1); + bit = bit ^ ((lfsr & BIT2) >> 2); + bit = bit ^ ((lfsr & BIT22) >> 22); + + lfsr = ((lfsr >> 1) | (bit << 31)); + } + + *lfsr_ptr = lfsr; +} + +/* Clear the pointers in a given byte lane in a given channel */ +void clear_pointers(void) +{ + uint8_t channel; + uint8_t bl; + + ENTERFN(); + + for (channel = 0; channel < NUM_CHANNELS; channel++) { + for (bl = 0; bl < NUM_BYTE_LANES; bl++) { + mrc_alt_write_mask(DDRPHY, + (B01PTRCTL1 + + (channel * DDRIODQ_CH_OFFSET) + + ((bl >> 1) * DDRIODQ_BL_OFFSET)), + ~BIT8, BIT8); + + mrc_alt_write_mask(DDRPHY, + (B01PTRCTL1 + + (channel * DDRIODQ_CH_OFFSET) + + ((bl >> 1) * DDRIODQ_BL_OFFSET)), + BIT8, BIT8); + } + } + + LEAVEFN(); +} + +static void print_timings_internal(uint8_t algo, uint8_t channel, uint8_t rank, + uint8_t bl_divisor) +{ + uint8_t bl; + + switch (algo) { + case RCVN: + DPF(D_INFO, "\nRCVN[%02d:%02d]", channel, rank); + break; + case WDQS: + DPF(D_INFO, "\nWDQS[%02d:%02d]", channel, rank); + break; + case WDQX: + DPF(D_INFO, "\nWDQx[%02d:%02d]", channel, rank); + break; + case RDQS: + DPF(D_INFO, "\nRDQS[%02d:%02d]", channel, rank); + break; + case VREF: + DPF(D_INFO, "\nVREF[%02d:%02d]", channel, rank); + break; + case WCMD: + DPF(D_INFO, "\nWCMD[%02d:%02d]", channel, rank); + break; + case WCTL: + DPF(D_INFO, "\nWCTL[%02d:%02d]", channel, rank); + break; + case WCLK: + DPF(D_INFO, "\nWCLK[%02d:%02d]", channel, rank); + break; + default: + break; + } + + for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl++) { + switch (algo) { + case RCVN: + DPF(D_INFO, " %03d", get_rcvn(channel, rank, bl)); + break; + case WDQS: + DPF(D_INFO, " %03d", get_wdqs(channel, rank, bl)); + break; + case WDQX: + DPF(D_INFO, " %03d", get_wdq(channel, rank, bl)); + break; + case RDQS: + DPF(D_INFO, " %03d", get_rdqs(channel, rank, bl)); + break; + case VREF: + DPF(D_INFO, " %03d", get_vref(channel, bl)); + break; + case WCMD: + DPF(D_INFO, " %03d", get_wcmd(channel)); + break; + case WCTL: + DPF(D_INFO, " %03d", get_wctl(channel, rank)); + break; + case WCLK: + DPF(D_INFO, " %03d", get_wclk(channel, rank)); + break; + default: + break; + } + } +} + +void print_timings(struct mrc_params *mrc_params) +{ + uint8_t algo; + uint8_t channel; + uint8_t rank; + uint8_t bl_divisor = (mrc_params->channel_width == X16) ? 2 : 1; + + DPF(D_INFO, "\n---------------------------"); + DPF(D_INFO, "\nALGO[CH:RK] BL0 BL1 BL2 BL3"); + DPF(D_INFO, "\n==========================="); + + for (algo = 0; algo < MAX_ALGOS; algo++) { + for (channel = 0; channel < NUM_CHANNELS; channel++) { + if (mrc_params->channel_enables & (1 << channel)) { + for (rank = 0; rank < NUM_RANKS; rank++) { + if (mrc_params->rank_enables & + (1 << rank)) { + print_timings_internal(algo, + channel, rank, + bl_divisor); + } + } + } + } + } + + DPF(D_INFO, "\n---------------------------"); + DPF(D_INFO, "\n"); +} diff --git a/arch/x86/cpu/quark/mrc_util.h b/arch/x86/cpu/quark/mrc_util.h new file mode 100644 index 0000000..f0ddbce --- /dev/null +++ b/arch/x86/cpu/quark/mrc_util.h @@ -0,0 +1,153 @@ +/* + * Copyright (C) 2013, Intel Corporation + * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> + * + * Ported from Intel released Quark UEFI BIOS + * QuarkSocPkg/QuarkNorthCluster/MemoryInit/Pei + * + * SPDX-License-Identifier: Intel + */ + +#ifndef _MRC_UTIL_H_ +#define _MRC_UTIL_H_ + +/* Turn on this macro to enable MRC debugging output */ +#undef MRC_DEBUG + +/* MRC Debug Support */ +#define DPF debug_cond + +/* debug print type */ + +#ifdef MRC_DEBUG +#define D_ERROR 0x0001 +#define D_INFO 0x0002 +#define D_REGRD 0x0004 +#define D_REGWR 0x0008 +#define D_FCALL 0x0010 +#define D_TRN 0x0020 +#define D_TIME 0x0040 +#else +#define D_ERROR 0 +#define D_INFO 0 +#define D_REGRD 0 +#define D_REGWR 0 +#define D_FCALL 0 +#define D_TRN 0 +#define D_TIME 0 +#endif + +#define ENTERFN(...) debug_cond(D_FCALL, "<%s>\n", __func__) +#define LEAVEFN(...) debug_cond(D_FCALL, "</%s>\n", __func__) +#define REPORTFN(...) debug_cond(D_FCALL, "<%s/>\n", __func__) + +/* Generic Register Bits */ +#define BIT0 0x00000001 +#define BIT1 0x00000002 +#define BIT2 0x00000004 +#define BIT3 0x00000008 +#define BIT4 0x00000010 +#define BIT5 0x00000020 +#define BIT6 0x00000040 +#define BIT7 0x00000080 +#define BIT8 0x00000100 +#define BIT9 0x00000200 +#define BIT10 0x00000400 +#define BIT11 0x00000800 +#define BIT12 0x00001000 +#define BIT13 0x00002000 +#define BIT14 0x00004000 +#define BIT15 0x00008000 +#define BIT16 0x00010000 +#define BIT17 0x00020000 +#define BIT18 0x00040000 +#define BIT19 0x00080000 +#define BIT20 0x00100000 +#define BIT21 0x00200000 +#define BIT22 0x00400000 +#define BIT23 0x00800000 +#define BIT24 0x01000000 +#define BIT25 0x02000000 +#define BIT26 0x04000000 +#define BIT27 0x08000000 +#define BIT28 0x10000000 +#define BIT29 0x20000000 +#define BIT30 0x40000000 +#define BIT31 0x80000000 + +/* Message Bus Port */ +#define MEM_CTLR 0x01 +#define HOST_BRIDGE 0x03 +#define MEM_MGR 0x05 +#define HTE 0x11 +#define DDRPHY 0x12 + +/* number of sample points */ +#define SAMPLE_CNT 3 +/* number of PIs to increment per sample */ +#define SAMPLE_DLY 26 + +enum { + /* indicates to decrease delays when looking for edge */ + BACKWARD, + /* indicates to increase delays when looking for edge */ + FORWARD +}; + +enum { + RCVN, + WDQS, + WDQX, + RDQS, + VREF, + WCMD, + WCTL, + WCLK, + MAX_ALGOS, +}; + +void mrc_write_mask(u32 unit, u32 addr, u32 data, u32 mask); +void mrc_alt_write_mask(u32 unit, u32 addr, u32 data, u32 mask); +void mrc_post_code(uint8_t major, uint8_t minor); +void delay_n(uint32_t ns); +void delay_u(uint32_t ms); +void select_mem_mgr(void); +void select_hte(void); +void dram_init_command(uint32_t data); +void dram_wake_command(void); +void training_message(uint8_t channel, uint8_t rank, uint8_t byte_lane); + +void set_rcvn(uint8_t channel, uint8_t rank, + uint8_t byte_lane, uint32_t pi_count); +uint32_t get_rcvn(uint8_t channel, uint8_t rank, uint8_t byte_lane); +void set_rdqs(uint8_t channel, uint8_t rank, + uint8_t byte_lane, uint32_t pi_count); +uint32_t get_rdqs(uint8_t channel, uint8_t rank, uint8_t byte_lane); +void set_wdqs(uint8_t channel, uint8_t rank, + uint8_t byte_lane, uint32_t pi_count); +uint32_t get_wdqs(uint8_t channel, uint8_t rank, uint8_t byte_lane); +void set_wdq(uint8_t channel, uint8_t rank, + uint8_t byte_lane, uint32_t pi_count); +uint32_t get_wdq(uint8_t channel, uint8_t rank, uint8_t byte_lane); +void set_wcmd(uint8_t channel, uint32_t pi_count); +uint32_t get_wcmd(uint8_t channel); +void set_wclk(uint8_t channel, uint8_t rank, uint32_t pi_count); +uint32_t get_wclk(uint8_t channel, uint8_t rank); +void set_wctl(uint8_t channel, uint8_t rank, uint32_t pi_count); +uint32_t get_wctl(uint8_t channel, uint8_t rank); +void set_vref(uint8_t channel, uint8_t byte_lane, uint32_t setting); +uint32_t get_vref(uint8_t channel, uint8_t byte_lane); + +uint32_t get_addr(uint8_t channel, uint8_t rank); +uint32_t sample_dqs(struct mrc_params *mrc_params, uint8_t channel, + uint8_t rank, bool rcvn); +void find_rising_edge(struct mrc_params *mrc_params, uint32_t delay[], + uint8_t channel, uint8_t rank, bool rcvn); +uint32_t byte_lane_mask(struct mrc_params *mrc_params); +uint32_t check_rw_coarse(struct mrc_params *mrc_params, uint32_t address); +uint32_t check_bls_ex(struct mrc_params *mrc_params, uint32_t address); +void lfsr32(uint32_t *lfsr_ptr); +void clear_pointers(void); +void print_timings(struct mrc_params *mrc_params); + +#endif /* _MRC_UTIL_H_ */ |