diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/cpu/armv7/zynq/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/zynq/clk.c | 638 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/zynq/cpu.c | 2 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-zynq/clk.h | 29 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-zynq/hardware.h | 32 |
5 files changed, 700 insertions, 2 deletions
diff --git a/arch/arm/cpu/armv7/zynq/Makefile b/arch/arm/cpu/armv7/zynq/Makefile index d382d49..3374789 100644 --- a/arch/arm/cpu/armv7/zynq/Makefile +++ b/arch/arm/cpu/armv7/zynq/Makefile @@ -12,3 +12,4 @@ obj-y := timer.o obj-y += cpu.o obj-y += ddrc.o obj-y += slcr.o +obj-y += clk.o diff --git a/arch/arm/cpu/armv7/zynq/clk.c b/arch/arm/cpu/armv7/zynq/clk.c new file mode 100644 index 0000000..0891a23 --- /dev/null +++ b/arch/arm/cpu/armv7/zynq/clk.c @@ -0,0 +1,638 @@ +/* + * Copyright (C) 2013 Soren Brinkmann <soren.brinkmann@xilinx.com> + * Copyright (C) 2013 Xilinx, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <errno.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/clk.h> + +/* Board oscillator frequency */ +#ifndef CONFIG_ZYNQ_PS_CLK_FREQ +# define CONFIG_ZYNQ_PS_CLK_FREQ 33333333UL +#endif + +/* Register bitfield defines */ +#define PLLCTRL_FBDIV_MASK 0x7f000 +#define PLLCTRL_FBDIV_SHIFT 12 +#define PLLCTRL_BPFORCE_MASK (1 << 4) +#define PLLCTRL_PWRDWN_MASK 2 +#define PLLCTRL_PWRDWN_SHIFT 1 +#define PLLCTRL_RESET_MASK 1 +#define PLLCTRL_RESET_SHIFT 0 + +#define ZYNQ_CLK_MAXDIV 0x3f +#define CLK_CTRL_DIV1_SHIFT 20 +#define CLK_CTRL_DIV1_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV1_SHIFT) +#define CLK_CTRL_DIV0_SHIFT 8 +#define CLK_CTRL_DIV0_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV0_SHIFT) +#define CLK_CTRL_SRCSEL_SHIFT 4 +#define CLK_CTRL_SRCSEL_MASK (0x3 << CLK_CTRL_SRCSEL_SHIFT) + +#define CLK_CTRL_DIV2X_SHIFT 26 +#define CLK_CTRL_DIV2X_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV2X_SHIFT) +#define CLK_CTRL_DIV3X_SHIFT 20 +#define CLK_CTRL_DIV3X_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV3X_SHIFT) + +#define ZYNQ_CLKMUX_SEL_0 0 +#define ZYNQ_CLKMUX_SEL_1 1 +#define ZYNQ_CLKMUX_SEL_2 2 +#define ZYNQ_CLKMUX_SEL_3 3 + +DECLARE_GLOBAL_DATA_PTR; + +struct clk; + +/** + * struct clk_ops: + * @set_rate: Function pointer to set_rate() implementation + * @get_rate: Function pointer to get_rate() implementation + */ +struct clk_ops { + int (*set_rate)(struct clk *clk, unsigned long rate); + unsigned long (*get_rate)(struct clk *clk); +}; + +/** + * struct clk: + * @name: Clock name + * @frequency: Currenct frequency + * @parent: Parent clock + * @flags: Clock flags + * @reg: Clock control register + * @ops: Clock operations + */ +struct clk { + char *name; + unsigned long frequency; + enum zynq_clk parent; + unsigned int flags; + u32 *reg; + struct clk_ops ops; +}; +#define ZYNQ_CLK_FLAGS_HAS_2_DIVS 1 + +static struct clk clks[clk_max]; + +/** + * __zynq_clk_cpu_get_parent() - Decode clock multiplexer + * @srcsel: Mux select value + * Returns the clock identifier associated with the selected mux input. + */ +static int __zynq_clk_cpu_get_parent(unsigned int srcsel) +{ + unsigned int ret; + + switch (srcsel) { + case ZYNQ_CLKMUX_SEL_0: + case ZYNQ_CLKMUX_SEL_1: + ret = armpll_clk; + break; + case ZYNQ_CLKMUX_SEL_2: + ret = ddrpll_clk; + break; + case ZYNQ_CLKMUX_SEL_3: + ret = iopll_clk; + break; + default: + ret = armpll_clk; + break; + } + + return ret; +} + +/** + * ddr2x_get_rate() - Get clock rate of DDR2x clock + * @clk: Clock handle + * Returns the current clock rate of @clk. + */ +static unsigned long ddr2x_get_rate(struct clk *clk) +{ + u32 clk_ctrl = readl(clk->reg); + u32 div = (clk_ctrl & CLK_CTRL_DIV2X_MASK) >> CLK_CTRL_DIV2X_SHIFT; + + return DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div); +} + +/** + * ddr3x_get_rate() - Get clock rate of DDR3x clock + * @clk: Clock handle + * Returns the current clock rate of @clk. + */ +static unsigned long ddr3x_get_rate(struct clk *clk) +{ + u32 clk_ctrl = readl(clk->reg); + u32 div = (clk_ctrl & CLK_CTRL_DIV3X_MASK) >> CLK_CTRL_DIV3X_SHIFT; + + return DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div); +} + +static void init_ddr_clocks(void) +{ + u32 div0, div1; + unsigned long prate = zynq_clk_get_rate(ddrpll_clk); + u32 clk_ctrl = readl(&slcr_base->ddr_clk_ctrl); + + /* DDR2x */ + clks[ddr2x_clk].reg = &slcr_base->ddr_clk_ctrl; + clks[ddr2x_clk].parent = ddrpll_clk; + clks[ddr2x_clk].name = "ddr_2x"; + clks[ddr2x_clk].frequency = ddr2x_get_rate(&clks[ddr2x_clk]); + clks[ddr2x_clk].ops.get_rate = ddr2x_get_rate; + + /* DDR3x */ + clks[ddr3x_clk].reg = &slcr_base->ddr_clk_ctrl; + clks[ddr3x_clk].parent = ddrpll_clk; + clks[ddr3x_clk].name = "ddr_3x"; + clks[ddr3x_clk].frequency = ddr3x_get_rate(&clks[ddr3x_clk]); + clks[ddr3x_clk].ops.get_rate = ddr3x_get_rate; + + /* DCI */ + clk_ctrl = readl(&slcr_base->dci_clk_ctrl); + div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT; + div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT; + clks[dci_clk].reg = &slcr_base->dci_clk_ctrl; + clks[dci_clk].parent = ddrpll_clk; + clks[dci_clk].frequency = DIV_ROUND_CLOSEST( + DIV_ROUND_CLOSEST(prate, div0), div1); + clks[dci_clk].name = "dci"; +} + +static void init_cpu_clocks(void) +{ + int clk_621; + u32 reg, div, srcsel; + enum zynq_clk parent; + + reg = readl(&slcr_base->arm_clk_ctrl); + clk_621 = readl(&slcr_base->clk_621_true) & 1; + div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT; + srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT; + parent = __zynq_clk_cpu_get_parent(srcsel); + + /* cpu clocks */ + clks[cpu_6or4x_clk].reg = &slcr_base->arm_clk_ctrl; + clks[cpu_6or4x_clk].parent = parent; + clks[cpu_6or4x_clk].frequency = DIV_ROUND_CLOSEST( + zynq_clk_get_rate(parent), div); + clks[cpu_6or4x_clk].name = "cpu_6or4x"; + + clks[cpu_3or2x_clk].reg = &slcr_base->arm_clk_ctrl; + clks[cpu_3or2x_clk].parent = cpu_6or4x_clk; + clks[cpu_3or2x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) / 2; + clks[cpu_3or2x_clk].name = "cpu_3or2x"; + + clks[cpu_2x_clk].reg = &slcr_base->arm_clk_ctrl; + clks[cpu_2x_clk].parent = cpu_6or4x_clk; + clks[cpu_2x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) / + (2 + clk_621); + clks[cpu_2x_clk].name = "cpu_2x"; + + clks[cpu_1x_clk].reg = &slcr_base->arm_clk_ctrl; + clks[cpu_1x_clk].parent = cpu_6or4x_clk; + clks[cpu_1x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) / + (4 + 2 * clk_621); + clks[cpu_1x_clk].name = "cpu_1x"; +} + +/** + * periph_calc_two_divs() - Calculate clock dividers + * @cur_rate: Current clock rate + * @tgt_rate: Target clock rate + * @prate: Parent clock rate + * @div0: First divider (output) + * @div1: Second divider (output) + * Returns the actual clock rate possible. + * + * Calculates clock dividers for clocks with two 6-bit dividers. + */ +static unsigned long periph_calc_two_divs(unsigned long cur_rate, + unsigned long tgt_rate, unsigned long prate, u32 *div0, + u32 *div1) +{ + long err, best_err = (long)(~0UL >> 1); + unsigned long rate, best_rate = 0; + u32 d0, d1; + + for (d0 = 1; d0 <= ZYNQ_CLK_MAXDIV; d0++) { + for (d1 = 1; d1 <= ZYNQ_CLK_MAXDIV >> 1; d1++) { + rate = DIV_ROUND_CLOSEST(DIV_ROUND_CLOSEST(prate, d0), + d1); + err = abs(rate - tgt_rate); + + if (err < best_err) { + *div0 = d0; + *div1 = d1; + best_err = err; + best_rate = rate; + } + } + } + + return best_rate; +} + +/** + * zynq_clk_periph_set_rate() - Set clock rate + * @clk: Handle of the peripheral clock + * @rate: New clock rate + * Sets the clock frequency of @clk to @rate. Returns zero on success. + */ +static int zynq_clk_periph_set_rate(struct clk *clk, + unsigned long rate) +{ + u32 ctrl, div0 = 0, div1 = 0; + unsigned long prate, new_rate, cur_rate = clk->frequency; + + ctrl = readl(clk->reg); + prate = zynq_clk_get_rate(clk->parent); + ctrl &= ~CLK_CTRL_DIV0_MASK; + + if (clk->flags & ZYNQ_CLK_FLAGS_HAS_2_DIVS) { + ctrl &= ~CLK_CTRL_DIV1_MASK; + new_rate = periph_calc_two_divs(cur_rate, rate, prate, &div0, + &div1); + ctrl |= div1 << CLK_CTRL_DIV1_SHIFT; + } else { + div0 = DIV_ROUND_CLOSEST(prate, rate); + div0 &= ZYNQ_CLK_MAXDIV; + new_rate = DIV_ROUND_CLOSEST(rate, div0); + } + + /* write new divs to hardware */ + ctrl |= div0 << CLK_CTRL_DIV0_SHIFT; + writel(ctrl, clk->reg); + + /* update frequency in clk framework */ + clk->frequency = new_rate; + + return 0; +} + +/** + * zynq_clk_periph_get_rate() - Get clock rate + * @clk: Handle of the peripheral clock + * Returns the current clock rate of @clk. + */ +static unsigned long zynq_clk_periph_get_rate(struct clk *clk) +{ + u32 clk_ctrl = readl(clk->reg); + u32 div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT; + u32 div1 = 1; + + if (clk->flags & ZYNQ_CLK_FLAGS_HAS_2_DIVS) + div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT; + + /* a register value of zero == division by 1 */ + if (!div0) + div0 = 1; + if (!div1) + div1 = 1; + + return + DIV_ROUND_CLOSEST( + DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div0), + div1); +} + +/** + * __zynq_clk_periph_get_parent() - Decode clock multiplexer + * @srcsel: Mux select value + * Returns the clock identifier associated with the selected mux input. + */ +static enum zynq_clk __zynq_clk_periph_get_parent(u32 srcsel) +{ + switch (srcsel) { + case ZYNQ_CLKMUX_SEL_0: + case ZYNQ_CLKMUX_SEL_1: + return iopll_clk; + case ZYNQ_CLKMUX_SEL_2: + return armpll_clk; + case ZYNQ_CLKMUX_SEL_3: + return ddrpll_clk; + default: + return 0; + } +} + +/** + * zynq_clk_periph_get_parent() - Decode clock multiplexer + * @clk: Clock handle + * Returns the clock identifier associated with the selected mux input. + */ +static enum zynq_clk zynq_clk_periph_get_parent(struct clk *clk) +{ + u32 clk_ctrl = readl(clk->reg); + u32 srcsel = (clk_ctrl & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT; + + return __zynq_clk_periph_get_parent(srcsel); +} + +/** + * zynq_clk_register_periph_clk() - Set up a peripheral clock with the framework + * @clk: Pointer to struct clk for the clock + * @ctrl: Clock control register + * @name: PLL name + * @two_divs: Indicates whether the clock features one or two dividers + */ +static int zynq_clk_register_periph_clk(struct clk *clk, u32 *ctrl, char *name, + bool two_divs) +{ + clk->name = name; + clk->reg = ctrl; + if (two_divs) + clk->flags = ZYNQ_CLK_FLAGS_HAS_2_DIVS; + clk->parent = zynq_clk_periph_get_parent(clk); + clk->frequency = zynq_clk_periph_get_rate(clk); + clk->ops.get_rate = zynq_clk_periph_get_rate; + clk->ops.set_rate = zynq_clk_periph_set_rate; + + return 0; +} + +static void init_periph_clocks(void) +{ + zynq_clk_register_periph_clk(&clks[gem0_clk], &slcr_base->gem0_clk_ctrl, + "gem0", 1); + zynq_clk_register_periph_clk(&clks[gem1_clk], &slcr_base->gem1_clk_ctrl, + "gem1", 1); + + zynq_clk_register_periph_clk(&clks[smc_clk], &slcr_base->smc_clk_ctrl, + "smc", 0); + + zynq_clk_register_periph_clk(&clks[lqspi_clk], + &slcr_base->lqspi_clk_ctrl, "lqspi", 0); + + zynq_clk_register_periph_clk(&clks[sdio0_clk], + &slcr_base->sdio_clk_ctrl, "sdio0", 0); + zynq_clk_register_periph_clk(&clks[sdio1_clk], + &slcr_base->sdio_clk_ctrl, "sdio1", 0); + + zynq_clk_register_periph_clk(&clks[spi0_clk], &slcr_base->spi_clk_ctrl, + "spi0", 0); + zynq_clk_register_periph_clk(&clks[spi1_clk], &slcr_base->spi_clk_ctrl, + "spi1", 0); + + zynq_clk_register_periph_clk(&clks[uart0_clk], + &slcr_base->uart_clk_ctrl, "uart0", 0); + zynq_clk_register_periph_clk(&clks[uart1_clk], + &slcr_base->uart_clk_ctrl, "uart1", 0); + + zynq_clk_register_periph_clk(&clks[dbg_trc_clk], + &slcr_base->dbg_clk_ctrl, "dbg_trc", 0); + zynq_clk_register_periph_clk(&clks[dbg_apb_clk], + &slcr_base->dbg_clk_ctrl, "dbg_apb", 0); + + zynq_clk_register_periph_clk(&clks[pcap_clk], + &slcr_base->pcap_clk_ctrl, "pcap", 0); + + zynq_clk_register_periph_clk(&clks[fclk0_clk], + &slcr_base->fpga0_clk_ctrl, "fclk0", 1); + zynq_clk_register_periph_clk(&clks[fclk1_clk], + &slcr_base->fpga1_clk_ctrl, "fclk1", 1); + zynq_clk_register_periph_clk(&clks[fclk2_clk], + &slcr_base->fpga2_clk_ctrl, "fclk2", 1); + zynq_clk_register_periph_clk(&clks[fclk3_clk], + &slcr_base->fpga3_clk_ctrl, "fclk3", 1); +} + +/** + * zynq_clk_register_aper_clk() - Set up a APER clock with the framework + * @clk: Pointer to struct clk for the clock + * @ctrl: Clock control register + * @name: PLL name + */ +static void zynq_clk_register_aper_clk(struct clk *clk, u32 *ctrl, char *name) +{ + clk->name = name; + clk->reg = ctrl; + clk->parent = cpu_1x_clk; + clk->frequency = zynq_clk_get_rate(clk->parent); +} + +static void init_aper_clocks(void) +{ + zynq_clk_register_aper_clk(&clks[usb0_aper_clk], + &slcr_base->aper_clk_ctrl, "usb0_aper"); + zynq_clk_register_aper_clk(&clks[usb1_aper_clk], + &slcr_base->aper_clk_ctrl, "usb1_aper"); + + zynq_clk_register_aper_clk(&clks[gem0_aper_clk], + &slcr_base->aper_clk_ctrl, "gem0_aper"); + zynq_clk_register_aper_clk(&clks[gem1_aper_clk], + &slcr_base->aper_clk_ctrl, "gem1_aper"); + + zynq_clk_register_aper_clk(&clks[sdio0_aper_clk], + &slcr_base->aper_clk_ctrl, "sdio0_aper"); + zynq_clk_register_aper_clk(&clks[sdio1_aper_clk], + &slcr_base->aper_clk_ctrl, "sdio1_aper"); + + zynq_clk_register_aper_clk(&clks[spi0_aper_clk], + &slcr_base->aper_clk_ctrl, "spi0_aper"); + zynq_clk_register_aper_clk(&clks[spi1_aper_clk], + &slcr_base->aper_clk_ctrl, "spi1_aper"); + + zynq_clk_register_aper_clk(&clks[can0_aper_clk], + &slcr_base->aper_clk_ctrl, "can0_aper"); + zynq_clk_register_aper_clk(&clks[can1_aper_clk], + &slcr_base->aper_clk_ctrl, "can1_aper"); + + zynq_clk_register_aper_clk(&clks[i2c0_aper_clk], + &slcr_base->aper_clk_ctrl, "i2c0_aper"); + zynq_clk_register_aper_clk(&clks[i2c1_aper_clk], + &slcr_base->aper_clk_ctrl, "i2c1_aper"); + + zynq_clk_register_aper_clk(&clks[uart0_aper_clk], + &slcr_base->aper_clk_ctrl, "uart0_aper"); + zynq_clk_register_aper_clk(&clks[uart1_aper_clk], + &slcr_base->aper_clk_ctrl, "uart1_aper"); + + zynq_clk_register_aper_clk(&clks[gpio_aper_clk], + &slcr_base->aper_clk_ctrl, "gpio_aper"); + + zynq_clk_register_aper_clk(&clks[lqspi_aper_clk], + &slcr_base->aper_clk_ctrl, "lqspi_aper"); + + zynq_clk_register_aper_clk(&clks[smc_aper_clk], + &slcr_base->aper_clk_ctrl, "smc_aper"); +} + +/** + * __zynq_clk_pll_get_rate() - Get PLL rate + * @addr: Address of the PLL's control register + * Returns the current PLL output rate. + */ +static unsigned long __zynq_clk_pll_get_rate(u32 *addr) +{ + u32 reg, mul, bypass; + + reg = readl(addr); + bypass = reg & PLLCTRL_BPFORCE_MASK; + if (bypass) + mul = 1; + else + mul = (reg & PLLCTRL_FBDIV_MASK) >> PLLCTRL_FBDIV_SHIFT; + + return CONFIG_ZYNQ_PS_CLK_FREQ * mul; +} + +/** + * zynq_clk_pll_get_rate() - Get PLL rate + * @pll: Handle of the PLL + * Returns the current clock rate of @pll. + */ +static unsigned long zynq_clk_pll_get_rate(struct clk *pll) +{ + return __zynq_clk_pll_get_rate(pll->reg); +} + +/** + * zynq_clk_register_pll() - Set up a PLL with the framework + * @clk: Pointer to struct clk for the PLL + * @ctrl: PLL control register + * @name: PLL name + * @prate: PLL input clock rate + */ +static void zynq_clk_register_pll(struct clk *clk, u32 *ctrl, char *name, + unsigned long prate) +{ + clk->name = name; + clk->reg = ctrl; + clk->frequency = zynq_clk_pll_get_rate(clk); + clk->ops.get_rate = zynq_clk_pll_get_rate; +} + +/** + * clkid_2_register() - Get clock control register + * @id: Clock identifier of one of the PLLs + * Returns the address of the requested PLL's control register. + */ +static u32 *clkid_2_register(enum zynq_clk id) +{ + switch (id) { + case armpll_clk: + return &slcr_base->arm_pll_ctrl; + case ddrpll_clk: + return &slcr_base->ddr_pll_ctrl; + case iopll_clk: + return &slcr_base->io_pll_ctrl; + default: + return &slcr_base->io_pll_ctrl; + } +} + +/* API */ +/** + * zynq_clk_early_init() - Early init for the clock framework + * + * This function is called from before relocation and sets up the CPU clock + * frequency in the global data struct. + */ +void zynq_clk_early_init(void) +{ + u32 reg = readl(&slcr_base->arm_clk_ctrl); + u32 div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT; + u32 srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT; + enum zynq_clk parent = __zynq_clk_cpu_get_parent(srcsel); + u32 *pllreg = clkid_2_register(parent); + unsigned long prate = __zynq_clk_pll_get_rate(pllreg); + + if (!div) + div = 1; + + gd->cpu_clk = DIV_ROUND_CLOSEST(prate, div); +} + +/** + * get_uart_clk() - Get UART input frequency + * @dev_index: UART ID + * Returns UART input clock frequency in Hz. + * + * Compared to zynq_clk_get_rate() this function is designed to work before + * relocation and can be called when the serial UART is set up. + */ +unsigned long get_uart_clk(int dev_index) +{ + u32 reg = readl(&slcr_base->uart_clk_ctrl); + u32 div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT; + u32 srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT; + enum zynq_clk parent = __zynq_clk_periph_get_parent(srcsel); + u32 *pllreg = clkid_2_register(parent); + unsigned long prate = __zynq_clk_pll_get_rate(pllreg); + + if (!div) + div = 1; + + return DIV_ROUND_CLOSEST(prate, div); +} + +/** + * set_cpu_clk_info() - Initialize clock framework + * Always returns zero. + * + * This function is called from common code after relocation and sets up the + * clock framework. The framework must not be used before this function had been + * called. + */ +int set_cpu_clk_info(void) +{ + zynq_clk_register_pll(&clks[armpll_clk], &slcr_base->arm_pll_ctrl, + "armpll", CONFIG_ZYNQ_PS_CLK_FREQ); + zynq_clk_register_pll(&clks[ddrpll_clk], &slcr_base->ddr_pll_ctrl, + "ddrpll", CONFIG_ZYNQ_PS_CLK_FREQ); + zynq_clk_register_pll(&clks[iopll_clk], &slcr_base->io_pll_ctrl, + "iopll", CONFIG_ZYNQ_PS_CLK_FREQ); + + init_ddr_clocks(); + init_cpu_clocks(); + init_periph_clocks(); + init_aper_clocks(); + + return 0; +} + +/** + * zynq_clk_get_rate() - Get clock rate + * @clk: Clock identifier + * Returns the current clock rate of @clk on success or zero for an invalid + * clock id. + */ +unsigned long zynq_clk_get_rate(enum zynq_clk clk) +{ + if (clk < 0 || clk >= clk_max) + return 0; + + return clks[clk].frequency; +} + +/** + * zynq_clk_set_rate() - Set clock rate + * @clk: Clock identifier + * @rate: Requested clock rate + * Passes on the return value from the clock's set_rate() function or negative + * errno. + */ +int zynq_clk_set_rate(enum zynq_clk clk, unsigned long rate) +{ + if (clk < 0 || clk >= clk_max) + return -ENODEV; + + if (clks[clk].ops.set_rate) + return clks[clk].ops.set_rate(&clks[clk], rate); + + return -ENXIO; +} + +/** + * zynq_clk_get_name() - Get clock name + * @clk: Clock identifier + * Returns the name of @clk. + */ +const char *zynq_clk_get_name(enum zynq_clk clk) +{ + return clks[clk].name; +} diff --git a/arch/arm/cpu/armv7/zynq/cpu.c b/arch/arm/cpu/armv7/zynq/cpu.c index c771759..5d505dd 100644 --- a/arch/arm/cpu/armv7/zynq/cpu.c +++ b/arch/arm/cpu/armv7/zynq/cpu.c @@ -6,6 +6,7 @@ */ #include <common.h> #include <asm/io.h> +#include <asm/arch/clk.h> #include <asm/arch/sys_proto.h> #include <asm/arch/hardware.h> @@ -35,6 +36,7 @@ int arch_cpu_init(void) writel(0xC, &slcr_base->ddr_urgent); #endif + zynq_clk_early_init(); zynq_slcr_lock(); return 0; diff --git a/arch/arm/include/asm/arch-zynq/clk.h b/arch/arm/include/asm/arch-zynq/clk.h new file mode 100644 index 0000000..250c5bc --- /dev/null +++ b/arch/arm/include/asm/arch-zynq/clk.h @@ -0,0 +1,29 @@ +/* + * Copyright (c) 2013 Xilinx Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ZYNQ_CLK_H_ +#define _ZYNQ_CLK_H_ + +enum zynq_clk { + armpll_clk, ddrpll_clk, iopll_clk, + cpu_6or4x_clk, cpu_3or2x_clk, cpu_2x_clk, cpu_1x_clk, + ddr2x_clk, ddr3x_clk, dci_clk, + lqspi_clk, smc_clk, pcap_clk, gem0_clk, gem1_clk, + fclk0_clk, fclk1_clk, fclk2_clk, fclk3_clk, can0_clk, can1_clk, + sdio0_clk, sdio1_clk, uart0_clk, uart1_clk, spi0_clk, spi1_clk, dma_clk, + usb0_aper_clk, usb1_aper_clk, gem0_aper_clk, gem1_aper_clk, + sdio0_aper_clk, sdio1_aper_clk, spi0_aper_clk, spi1_aper_clk, + can0_aper_clk, can1_aper_clk, i2c0_aper_clk, i2c1_aper_clk, + uart0_aper_clk, uart1_aper_clk, gpio_aper_clk, lqspi_aper_clk, + smc_aper_clk, swdt_clk, dbg_trc_clk, dbg_apb_clk, clk_max}; + +void zynq_clk_early_init(void); +int zynq_clk_set_rate(enum zynq_clk clk, unsigned long rate); +unsigned long zynq_clk_get_rate(enum zynq_clk clk); +const char *zynq_clk_get_name(enum zynq_clk clk); +unsigned long get_uart_clk(int dev_id); + +#endif diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h index d0fba64..39184da 100644 --- a/arch/arm/include/asm/arch-zynq/hardware.h +++ b/arch/arm/include/asm/arch-zynq/hardware.h @@ -34,12 +34,40 @@ struct slcr_regs { u32 scl; /* 0x0 */ u32 slcr_lock; /* 0x4 */ u32 slcr_unlock; /* 0x8 */ - u32 reserved0[75]; + u32 reserved0_1[61]; + u32 arm_pll_ctrl; /* 0x100 */ + u32 ddr_pll_ctrl; /* 0x104 */ + u32 io_pll_ctrl; /* 0x108 */ + u32 reserved0_2[5]; + u32 arm_clk_ctrl; /* 0x120 */ + u32 ddr_clk_ctrl; /* 0x124 */ + u32 dci_clk_ctrl; /* 0x128 */ + u32 aper_clk_ctrl; /* 0x12c */ + u32 reserved0_3[2]; u32 gem0_rclk_ctrl; /* 0x138 */ u32 gem1_rclk_ctrl; /* 0x13c */ u32 gem0_clk_ctrl; /* 0x140 */ u32 gem1_clk_ctrl; /* 0x144 */ - u32 reserved1[46]; + u32 smc_clk_ctrl; /* 0x148 */ + u32 lqspi_clk_ctrl; /* 0x14c */ + u32 sdio_clk_ctrl; /* 0x150 */ + u32 uart_clk_ctrl; /* 0x154 */ + u32 spi_clk_ctrl; /* 0x158 */ + u32 can_clk_ctrl; /* 0x15c */ + u32 can_mioclk_ctrl; /* 0x160 */ + u32 dbg_clk_ctrl; /* 0x164 */ + u32 pcap_clk_ctrl; /* 0x168 */ + u32 reserved0_4[1]; + u32 fpga0_clk_ctrl; /* 0x170 */ + u32 reserved0_5[3]; + u32 fpga1_clk_ctrl; /* 0x180 */ + u32 reserved0_6[3]; + u32 fpga2_clk_ctrl; /* 0x190 */ + u32 reserved0_7[3]; + u32 fpga3_clk_ctrl; /* 0x1a0 */ + u32 reserved0_8[8]; + u32 clk_621_true; /* 0x1c4 */ + u32 reserved1[14]; u32 pss_rst_ctrl; /* 0x200 */ u32 reserved2[15]; u32 fpga_rst_ctrl; /* 0x240 */ |