summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/x86/Kconfig38
-rw-r--r--arch/x86/cpu/queensbay/Kconfig38
2 files changed, 38 insertions, 38 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 928fc60..c2af607 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -344,6 +344,44 @@ config TSC_FREQ_IN_MHZ
help
The running frequency in MHz of Time-Stamp Counter (TSC).
+config HAVE_FSP
+ bool "Add an Firmware Support Package binary"
+ help
+ Select this option to add an Firmware Support Package binary to
+ the resulting U-Boot image. It is a binary blob which U-Boot uses
+ to set up SDRAM and other chipset specific initialization.
+
+ Note: Without this binary U-Boot will not be able to set up its
+ SDRAM so will not boot.
+
+config FSP_FILE
+ string "Firmware Support Package binary filename"
+ depends on HAVE_FSP
+ default "fsp.bin"
+ help
+ The filename of the file to use as Firmware Support Package binary
+ in the board directory.
+
+config FSP_ADDR
+ hex "Firmware Support Package binary location"
+ depends on HAVE_FSP
+ default 0xfffc0000
+ help
+ FSP is not Position Independent Code (PIC) and the whole FSP has to
+ be rebased if it is placed at a location which is different from the
+ perferred base address specified during the FSP build. Use Intel's
+ Binary Configuration Tool (BCT) to do the rebase.
+
+ The default base address of 0xfffc0000 indicates that the binary must
+ be located at offset 0xc0000 from the beginning of a 1MB flash device.
+
+config FSP_TEMP_RAM_ADDR
+ hex
+ default 0x2000000
+ help
+ Stack top address which is used in FspInit after DRAM is ready and
+ CAR is disabled.
+
source "arch/x86/cpu/coreboot/Kconfig"
source "arch/x86/cpu/ivybridge/Kconfig"
diff --git a/arch/x86/cpu/queensbay/Kconfig b/arch/x86/cpu/queensbay/Kconfig
index f6b5201..397e599 100644
--- a/arch/x86/cpu/queensbay/Kconfig
+++ b/arch/x86/cpu/queensbay/Kconfig
@@ -11,44 +11,6 @@ config INTEL_QUEENSBAY
if INTEL_QUEENSBAY
-config HAVE_FSP
- bool "Add an Firmware Support Package binary"
- help
- Select this option to add an Firmware Support Package binary to
- the resulting U-Boot image. It is a binary blob which U-Boot uses
- to set up SDRAM and other chipset specific initialization.
-
- Note: Without this binary U-Boot will not be able to set up its
- SDRAM so will not boot.
-
-config FSP_FILE
- string "Firmware Support Package binary filename"
- depends on HAVE_FSP
- default "fsp.bin"
- help
- The filename of the file to use as Firmware Support Package binary
- in the board directory.
-
-config FSP_ADDR
- hex "Firmware Support Package binary location"
- depends on HAVE_FSP
- default 0xfffc0000
- help
- FSP is not Position Independent Code (PIC) and the whole FSP has to
- be rebased if it is placed at a location which is different from the
- perferred base address specified during the FSP build. Use Intel's
- Binary Configuration Tool (BCT) to do the rebase.
-
- The default base address of 0xfffc0000 indicates that the binary must
- be located at offset 0xc0000 from the beginning of a 1MB flash device.
-
-config FSP_TEMP_RAM_ADDR
- hex
- default 0x2000000
- help
- Stack top address which is used in FspInit after DRAM is ready and
- CAR is disabled.
-
config HAVE_CMC
bool "Add a Chipset Micro Code state machine binary"
help