diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/x86/cpu/intel_common/Makefile | 1 | ||||
-rw-r--r-- | arch/x86/cpu/intel_common/cpu.c | 111 | ||||
-rw-r--r-- | arch/x86/cpu/ivybridge/cpu.c | 80 | ||||
-rw-r--r-- | arch/x86/include/asm/arch-ivybridge/pch.h | 2 | ||||
-rw-r--r-- | arch/x86/include/asm/cpu_common.h | 35 | ||||
-rw-r--r-- | arch/x86/include/asm/intel_regs.h | 9 |
6 files changed, 162 insertions, 76 deletions
diff --git a/arch/x86/cpu/intel_common/Makefile b/arch/x86/cpu/intel_common/Makefile index 74b005a..06de964 100644 --- a/arch/x86/cpu/intel_common/Makefile +++ b/arch/x86/cpu/intel_common/Makefile @@ -5,6 +5,7 @@ # obj-$(CONFIG_HAVE_MRC) += car.o +obj-y += cpu.o obj-y += lpc.o ifndef CONFIG_TARGET_EFI obj-y += microcode.o diff --git a/arch/x86/cpu/intel_common/cpu.c b/arch/x86/cpu/intel_common/cpu.c new file mode 100644 index 0000000..1210943 --- /dev/null +++ b/arch/x86/cpu/intel_common/cpu.c @@ -0,0 +1,111 @@ +/* + * Copyright (c) 2016 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <asm/cpu_common.h> +#include <asm/intel_regs.h> +#include <asm/lapic.h> +#include <asm/lpc_common.h> +#include <asm/msr.h> +#include <asm/mtrr.h> +#include <asm/post.h> +#include <asm/microcode.h> + +DECLARE_GLOBAL_DATA_PTR; + +static int report_bist_failure(void) +{ + if (gd->arch.bist != 0) { + post_code(POST_BIST_FAILURE); + printf("BIST failed: %08x\n", gd->arch.bist); + return -EFAULT; + } + + return 0; +} + +int cpu_common_init(void) +{ + struct udevice *dev, *lpc; + int ret; + + /* Halt if there was a built in self test failure */ + ret = report_bist_failure(); + if (ret) + return ret; + + enable_lapic(); + + ret = microcode_update_intel(); + if (ret && ret != -EEXIST) + return ret; + + /* Enable upper 128bytes of CMOS */ + writel(1 << 2, RCB_REG(RC)); + + /* Early chipset init required before RAM init can work */ + uclass_first_device(UCLASS_NORTHBRIDGE, &dev); + + ret = uclass_first_device(UCLASS_LPC, &lpc); + if (ret) + return ret; + if (!lpc) + return -ENODEV; + + /* Cause the SATA device to do its early init */ + uclass_first_device(UCLASS_DISK, &dev); + + return 0; +} + +int cpu_set_flex_ratio_to_tdp_nominal(void) +{ + msr_t flex_ratio, msr; + u8 nominal_ratio; + + /* Check for Flex Ratio support */ + flex_ratio = msr_read(MSR_FLEX_RATIO); + if (!(flex_ratio.lo & FLEX_RATIO_EN)) + return -EINVAL; + + /* Check for >0 configurable TDPs */ + msr = msr_read(MSR_PLATFORM_INFO); + if (((msr.hi >> 1) & 3) == 0) + return -EINVAL; + + /* Use nominal TDP ratio for flex ratio */ + msr = msr_read(MSR_CONFIG_TDP_NOMINAL); + nominal_ratio = msr.lo & 0xff; + + /* See if flex ratio is already set to nominal TDP ratio */ + if (((flex_ratio.lo >> 8) & 0xff) == nominal_ratio) + return 0; + + /* Set flex ratio to nominal TDP ratio */ + flex_ratio.lo &= ~0xff00; + flex_ratio.lo |= nominal_ratio << 8; + flex_ratio.lo |= FLEX_RATIO_LOCK; + msr_write(MSR_FLEX_RATIO, flex_ratio); + + /* Set flex ratio in soft reset data register bits 11:6 */ + clrsetbits_le32(RCB_REG(SOFT_RESET_DATA), 0x3f << 6, + (nominal_ratio & 0x3f) << 6); + + debug("CPU: Soft reset to set up flex ratio\n"); + + /* Set soft reset control to use register value */ + setbits_le32(RCB_REG(SOFT_RESET_CTRL), 1); + + /* Issue warm reset, will be "CPU only" due to soft reset data */ + outb(0x0, PORT_RESET); + outb(SYS_RST | RST_CPU, PORT_RESET); + cpu_hlt(); + + /* Not reached */ + return -EINVAL; +} diff --git a/arch/x86/cpu/ivybridge/cpu.c b/arch/x86/cpu/ivybridge/cpu.c index 796771c..bb720ba 100644 --- a/arch/x86/cpu/ivybridge/cpu.c +++ b/arch/x86/cpu/ivybridge/cpu.c @@ -17,6 +17,7 @@ #include <fdtdec.h> #include <pch.h> #include <asm/cpu.h> +#include <asm/cpu_common.h> #include <asm/intel_regs.h> #include <asm/io.h> #include <asm/lapic.h> @@ -34,51 +35,11 @@ DECLARE_GLOBAL_DATA_PTR; static int set_flex_ratio_to_tdp_nominal(void) { - msr_t flex_ratio, msr; - u8 nominal_ratio; - /* Minimum CPU revision for configurable TDP support */ if (cpuid_eax(1) < IVB_CONFIG_TDP_MIN_CPUID) return -EINVAL; - /* Check for Flex Ratio support */ - flex_ratio = msr_read(MSR_FLEX_RATIO); - if (!(flex_ratio.lo & FLEX_RATIO_EN)) - return -EINVAL; - - /* Check for >0 configurable TDPs */ - msr = msr_read(MSR_PLATFORM_INFO); - if (((msr.hi >> 1) & 3) == 0) - return -EINVAL; - - /* Use nominal TDP ratio for flex ratio */ - msr = msr_read(MSR_CONFIG_TDP_NOMINAL); - nominal_ratio = msr.lo & 0xff; - - /* See if flex ratio is already set to nominal TDP ratio */ - if (((flex_ratio.lo >> 8) & 0xff) == nominal_ratio) - return 0; - - /* Set flex ratio to nominal TDP ratio */ - flex_ratio.lo &= ~0xff00; - flex_ratio.lo |= nominal_ratio << 8; - flex_ratio.lo |= FLEX_RATIO_LOCK; - msr_write(MSR_FLEX_RATIO, flex_ratio); - - /* Set flex ratio in soft reset data register bits 11:6 */ - clrsetbits_le32(RCB_REG(SOFT_RESET_DATA), 0x3f << 6, - (nominal_ratio & 0x3f) << 6); - - /* Set soft reset control to use register value */ - setbits_le32(RCB_REG(SOFT_RESET_CTRL), 1); - - /* Issue warm reset, will be "CPU only" due to soft reset data */ - outb(0x0, PORT_RESET); - outb(SYS_RST | RST_CPU, PORT_RESET); - cpu_hlt(); - - /* Not reached */ - return -EINVAL; + return cpu_set_flex_ratio_to_tdp_nominal(); } int arch_cpu_init(void) @@ -163,17 +124,6 @@ static void enable_usb_bar(struct udevice *bus) pci_bus_write_config(bus, usb3, PCI_COMMAND, cmd, PCI_SIZE_32); } -static int report_bist_failure(void) -{ - if (gd->arch.bist != 0) { - post_code(POST_BIST_FAILURE); - printf("BIST failed: %08x\n", gd->arch.bist); - return -EFAULT; - } - - return 0; -} - int print_cpuinfo(void) { enum pei_boot_mode_t boot_mode = PEI_BOOT_NONE; @@ -184,20 +134,6 @@ int print_cpuinfo(void) uint16_t pm1_sts; int ret; - /* Halt if there was a built in self test failure */ - ret = report_bist_failure(); - if (ret) - return ret; - - enable_lapic(); - - ret = microcode_update_intel(); - if (ret) - return ret; - - /* Enable upper 128bytes of CMOS */ - writel(1 << 2, RCB_REG(RC)); - /* TODO: cmos_post_init() */ if (readl(MCHBAR_REG(SSKPD)) == 0xCAFE) { debug("soft reset detected\n"); @@ -208,16 +144,10 @@ int print_cpuinfo(void) reset_cpu(0); } - /* Early chipset init required before RAM init can work */ - uclass_first_device(UCLASS_NORTHBRIDGE, &dev); - - ret = uclass_first_device_err(UCLASS_LPC, &lpc); + ret = cpu_common_init(); if (ret) return ret; - /* Cause the SATA device to do its early init */ - uclass_first_device(UCLASS_DISK, &dev); - /* Check PM1_STS[15] to see if we are waking from Sx */ pm1_sts = inw(DEFAULT_PMBASE + PM1_STS); @@ -240,8 +170,10 @@ int print_cpuinfo(void) return ret; /* Prepare USB controller early in S3 resume */ - if (boot_mode == PEI_BOOT_RESUME) + if (boot_mode == PEI_BOOT_RESUME) { + uclass_first_device(UCLASS_LPC, &lpc); enable_usb_bar(pci_get_controller(lpc->parent)); + } gd->arch.pei_boot_mode = boot_mode; diff --git a/arch/x86/include/asm/arch-ivybridge/pch.h b/arch/x86/include/asm/arch-ivybridge/pch.h index f96dc2b..e72ff2a 100644 --- a/arch/x86/include/asm/arch-ivybridge/pch.h +++ b/arch/x86/include/asm/arch-ivybridge/pch.h @@ -332,8 +332,6 @@ #define SPI_FREQ_SWSEQ 0x3893 #define SPI_DESC_COMP0 0x38b0 #define SPI_FREQ_WR_ERA 0x38b4 -#define SOFT_RESET_CTRL 0x38f4 -#define SOFT_RESET_DATA 0x38f8 #define DIR_ROUTE(a, b, c, d) \ (((d) << DIR_IDR) | ((c) << DIR_ICR) | \ diff --git a/arch/x86/include/asm/cpu_common.h b/arch/x86/include/asm/cpu_common.h new file mode 100644 index 0000000..562de3e --- /dev/null +++ b/arch/x86/include/asm/cpu_common.h @@ -0,0 +1,35 @@ +/* + * Copyright (c) 2016 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __ASM_CPU_COMMON_H +#define __ASM_CPU_COMMON_H + +#define IA32_PERF_CTL 0x199 + +/** + * cpu_common_init() - Set up common CPU init + * + * This reports BIST failure, enables the LAPIC, updates microcode, enables + * the upper 128-bytes of CROM RAM, probes the northbridge, PCH, LPC and SATA. + * + * @return 0 if OK, -ve on error + */ +int cpu_common_init(void); + +/** + * cpu_set_flex_ratio_to_tdp_nominal() - Set up the maximum non-turbo rate + * + * If a change is needed, this function will do a soft reset so it takes + * effect. + * + * Some details are available here: + * http://forum.hwbot.org/showthread.php?t=76092 + * + * @return 0 if OK, -ve on error + */ +int cpu_set_flex_ratio_to_tdp_nominal(void); + +#endif diff --git a/arch/x86/include/asm/intel_regs.h b/arch/x86/include/asm/intel_regs.h index 961d2bd..d2a6d26 100644 --- a/arch/x86/include/asm/intel_regs.h +++ b/arch/x86/include/asm/intel_regs.h @@ -12,8 +12,17 @@ #define MCH_BASE_SIZE 0x8000 #define MCHBAR_REG(reg) (MCH_BASE_ADDRESS + (reg)) +#define MCHBAR_PEI_VERSION 0x5034 +#define MCH_PKG_POWER_LIMIT_LO 0x59a0 +#define MCH_PKG_POWER_LIMIT_HI 0x59a4 +#define MCH_DDR_POWER_LIMIT_LO 0x58e0 +#define MCH_DDR_POWER_LIMIT_HI 0x58e4 + /* Access the Root Complex Register Block */ #define RCB_BASE_ADDRESS 0xfed1c000 #define RCB_REG(reg) (RCB_BASE_ADDRESS + (reg)) +#define SOFT_RESET_CTRL 0x38f4 +#define SOFT_RESET_DATA 0x38f8 + #endif |