diff options
Diffstat (limited to 'arch')
80 files changed, 825 insertions, 2286 deletions
diff --git a/arch/arm/config.mk b/arch/arm/config.mk index e7839be..461899e 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -87,9 +87,7 @@ endif endif # needed for relocation -ifndef CONFIG_NAND_SPL LDFLAGS_u-boot += -pie -endif # # FIXME: binutils versions < 2.22 have a bug in the assembler where diff --git a/arch/arm/cpu/arm1136/config.mk b/arch/arm/cpu/arm1136/config.mk index 9092d91..797d122 100644 --- a/arch/arm/cpu/arm1136/config.mk +++ b/arch/arm/cpu/arm1136/config.mk @@ -31,6 +31,13 @@ PLATFORM_CPPFLAGS += -march=armv5 # ========================================================================= PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) + +ifneq ($(CONFIG_IMX_CONFIG),) +ifdef CONFIG_SPL ifdef CONFIG_SPL_BUILD ALL-y += $(OBJTREE)/SPL endif +else +ALL-y += $(obj)u-boot.imx +endif +endif diff --git a/arch/arm/cpu/arm1136/omap24xx/timer.c b/arch/arm/cpu/arm1136/omap24xx/timer.c index 53015cb..3b6666b 100644 --- a/arch/arm/cpu/arm1136/omap24xx/timer.c +++ b/arch/arm/cpu/arm1136/omap24xx/timer.c @@ -31,13 +31,16 @@ */ #include <common.h> +#include <asm/io.h> #include <asm/arch/bits.h> #include <asm/arch/omap2420.h> +#define TIMER_CLOCK (CONFIG_SYS_CLK_FREQ / (2 << CONFIG_SYS_PTV)) #define TIMER_LOAD_VAL 0 /* macro to read the 32 bit timer */ -#define READ_TIMER (*((volatile ulong *)(CONFIG_SYS_TIMERBASE+TCRR))) +#define READ_TIMER readl(CONFIG_SYS_TIMERBASE+TCRR) \ + / (TIMER_CLOCK / CONFIG_SYS_HZ) DECLARE_GLOBAL_DATA_PTR; @@ -99,7 +102,8 @@ ulong get_timer_masked (void) gd->arch.tbl += (now - gd->arch.lastinc); } else { /* we have rollover of incrementer */ - gd->arch.tbl += (0xFFFFFFFF - gd->arch.lastinc) + now; + gd->arch.tbl += ((0xFFFFFFFF / (TIMER_CLOCK / CONFIG_SYS_HZ)) + - gd->arch.lastinc) + now; } gd->arch.lastinc = now; return gd->arch.tbl; diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index eba2324..ad24b80 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -88,7 +88,11 @@ _end_vect: .globl _TEXT_BASE _TEXT_BASE: +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) + .word CONFIG_SPL_TEXT_BASE +#else .word CONFIG_SYS_TEXT_BASE +#endif /* * These are defined in the board-specific linker script. @@ -100,9 +104,9 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start -.global _image_copy_end_ofs +.globl _image_copy_end_ofs _image_copy_end_ofs: - .word __image_copy_end - _start + .word __image_copy_end - _start .globl _bss_end_ofs _bss_end_ofs: @@ -170,29 +174,24 @@ next: /*------------------------------------------------------------------------------*/ /* - * void relocate_code (addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. + * void relocate_code(addr_moni) * + * This function relocates the monitor code. */ .globl relocate_code relocate_code: - mov r4, r0 /* save addr_sp */ - mov r5, r1 /* save addr of gd */ - mov r6, r2 /* save addr of destination */ + mov r6, r0 /* save addr of destination */ adr r0, _start - cmp r0, r6 - moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ + subs r9, r6, r0 /* r9 <- relocation offset */ beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */ copy_loop: - ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r1!, {r9-r10} /* copy to target address [r1] */ + ldmia r0!, {r10-r11} /* copy from source address [r0] */ + stmia r1!, {r10-r11} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -201,7 +200,6 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ @@ -235,8 +233,6 @@ fixnext: add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 blo fixloop - bx lr - #endif relocate_done: diff --git a/arch/arm/cpu/arm1136/u-boot-spl.lds b/arch/arm/cpu/arm1136/u-boot-spl.lds index b09b4eb..8296e5d 100644 --- a/arch/arm/cpu/arm1136/u-boot-spl.lds +++ b/arch/arm/cpu/arm1136/u-boot-spl.lds @@ -38,7 +38,7 @@ SECTIONS .text : { __start = .; - arch/arm/cpu/arm1136/start.o (.text) + arch/arm/cpu/arm1136/start.o (.text*) *(.text*) } >.sram diff --git a/arch/arm/cpu/arm1176/bcm2835/timer.c b/arch/arm/cpu/arm1176/bcm2835/timer.c index d232d7e..2edd671 100644 --- a/arch/arm/cpu/arm1176/bcm2835/timer.c +++ b/arch/arm/cpu/arm1176/bcm2835/timer.c @@ -23,7 +23,7 @@ int timer_init(void) return 0; } -ulong get_timer(ulong base) +ulong get_timer_us(ulong base) { struct bcm2835_timer_regs *regs = (struct bcm2835_timer_regs *)BCM2835_TIMER_PHYSADDR; @@ -31,6 +31,14 @@ ulong get_timer(ulong base) return readl(®s->clo) - base; } +ulong get_timer(ulong base) +{ + ulong us = get_timer_us(0); + us /= (1000000 / CONFIG_SYS_HZ); + us -= base; + return us; +} + unsigned long long get_ticks(void) { return get_timer(0); @@ -46,10 +54,10 @@ void __udelay(unsigned long usec) ulong endtime; signed long diff; - endtime = get_timer(0) + usec; + endtime = get_timer_us(0) + usec; do { - ulong now = get_timer(0); + ulong now = get_timer_us(0); diff = endtime - now; } while (diff >= 0); } diff --git a/arch/arm/cpu/arm1176/s3c64xx/Makefile b/arch/arm/cpu/arm1176/s3c64xx/Makefile deleted file mode 100644 index 266a073..0000000 --- a/arch/arm/cpu/arm1176/s3c64xx/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2008 -# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(SOC).o - -SOBJS = reset.o - -COBJS-$(CONFIG_S3C6400) += cpu_init.o speed.o -COBJS-y += timer.o init.o - -OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y)) - -all: $(obj).depend $(START) $(LIB) - -$(LIB): $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/arch/arm/cpu/arm1176/s3c64xx/config.mk b/arch/arm/cpu/arm1176/s3c64xx/config.mk deleted file mode 100644 index 222d352..0000000 --- a/arch/arm/cpu/arm1176/s3c64xx/config.mk +++ /dev/null @@ -1,34 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# -PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float - -# Make ARMv5 to allow more compilers to work, even though its v6. -PLATFORM_CPPFLAGS += -march=armv5t -# ========================================================================= -# -# Supply options according to compiler version -# -# ========================================================================= -PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,\ - $(call cc-option,-malignment-traps,)) -PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) diff --git a/arch/arm/cpu/arm1176/s3c64xx/cpu_init.S b/arch/arm/cpu/arm1176/s3c64xx/cpu_init.S deleted file mode 100644 index df88cba..0000000 --- a/arch/arm/cpu/arm1176/s3c64xx/cpu_init.S +++ /dev/null @@ -1,135 +0,0 @@ -/* - * Originates from Samsung's u-boot 1.1.6 port to S3C6400 / SMDK6400 - * - * Copyright (C) 2008 - * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <asm/arch/s3c6400.h> - - .globl mem_ctrl_asm_init -mem_ctrl_asm_init: - /* DMC1 base address 0x7e001000 */ - ldr r0, =ELFIN_DMC1_BASE - - ldr r1, =0x4 - str r1, [r0, #INDEX_DMC_MEMC_CMD] - - ldr r1, =DMC_DDR_REFRESH_PRD - str r1, [r0, #INDEX_DMC_REFRESH_PRD] - - ldr r1, =DMC_DDR_CAS_LATENCY - str r1, [r0, #INDEX_DMC_CAS_LATENCY] - - ldr r1, =DMC_DDR_t_DQSS - str r1, [r0, #INDEX_DMC_T_DQSS] - - ldr r1, =DMC_DDR_t_MRD - str r1, [r0, #INDEX_DMC_T_MRD] - - ldr r1, =DMC_DDR_t_RAS - str r1, [r0, #INDEX_DMC_T_RAS] - - ldr r1, =DMC_DDR_t_RC - str r1, [r0, #INDEX_DMC_T_RC] - - ldr r1, =DMC_DDR_t_RCD - ldr r2, =DMC_DDR_schedule_RCD - orr r1, r1, r2 - str r1, [r0, #INDEX_DMC_T_RCD] - - ldr r1, =DMC_DDR_t_RFC - ldr r2, =DMC_DDR_schedule_RFC - orr r1, r1, r2 - str r1, [r0, #INDEX_DMC_T_RFC] - - ldr r1, =DMC_DDR_t_RP - ldr r2, =DMC_DDR_schedule_RP - orr r1, r1, r2 - str r1, [r0, #INDEX_DMC_T_RP] - - ldr r1, =DMC_DDR_t_RRD - str r1, [r0, #INDEX_DMC_T_RRD] - - ldr r1, =DMC_DDR_t_WR - str r1, [r0, #INDEX_DMC_T_WR] - - ldr r1, =DMC_DDR_t_WTR - str r1, [r0, #INDEX_DMC_T_WTR] - - ldr r1, =DMC_DDR_t_XP - str r1, [r0, #INDEX_DMC_T_XP] - - ldr r1, =DMC_DDR_t_XSR - str r1, [r0, #INDEX_DMC_T_XSR] - - ldr r1, =DMC_DDR_t_ESR - str r1, [r0, #INDEX_DMC_T_ESR] - - ldr r1, =DMC1_MEM_CFG - str r1, [r0, #INDEX_DMC_MEMORY_CFG] - - ldr r1, =DMC1_MEM_CFG2 - str r1, [r0, #INDEX_DMC_MEMORY_CFG2] - - ldr r1, =DMC1_CHIP0_CFG - str r1, [r0, #INDEX_DMC_CHIP_0_CFG] - - ldr r1, =DMC_DDR_32_CFG - str r1, [r0, #INDEX_DMC_USER_CONFIG] - - /* DMC0 DDR Chip 0 configuration direct command reg */ - ldr r1, =DMC_NOP0 - str r1, [r0, #INDEX_DMC_DIRECT_CMD] - - /* Precharge All */ - ldr r1, =DMC_PA0 - str r1, [r0, #INDEX_DMC_DIRECT_CMD] - - /* Auto Refresh 2 time */ - ldr r1, =DMC_AR0 - str r1, [r0, #INDEX_DMC_DIRECT_CMD] - str r1, [r0, #INDEX_DMC_DIRECT_CMD] - - /* MRS */ - ldr r1, =DMC_mDDR_EMR0 - str r1, [r0, #INDEX_DMC_DIRECT_CMD] - - /* Mode Reg */ - ldr r1, =DMC_mDDR_MR0 - str r1, [r0, #INDEX_DMC_DIRECT_CMD] - - /* Enable DMC1 */ - mov r1, #0x0 - str r1, [r0, #INDEX_DMC_MEMC_CMD] - -check_dmc1_ready: - ldr r1, [r0, #INDEX_DMC_MEMC_STATUS] - mov r2, #0x3 - and r1, r1, r2 - cmp r1, #0x1 - bne check_dmc1_ready - nop - - mov pc, lr - - .ltorg diff --git a/arch/arm/cpu/arm1176/s3c64xx/init.c b/arch/arm/cpu/arm1176/s3c64xx/init.c deleted file mode 100644 index f113d8e..0000000 --- a/arch/arm/cpu/arm1176/s3c64xx/init.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * (C) Copyright 2012 Ashok Kumar Reddy Kourla - * ashokkourla2000@gmail.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include<common.h> - -int arch_cpu_init(void) -{ - icache_enable(); - - return 0; -} diff --git a/arch/arm/cpu/arm1176/s3c64xx/speed.c b/arch/arm/cpu/arm1176/s3c64xx/speed.c deleted file mode 100644 index 11962ac..0000000 --- a/arch/arm/cpu/arm1176/s3c64xx/speed.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * (C) Copyright 2001-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, d.mueller@elsoft.ch - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * This code should work for both the S3C2400 and the S3C2410 - * as they seem to have the same PLL and clock machinery inside. - * The different address mapping is handled by the s3c24xx.h files below. - */ - -#include <common.h> -#include <asm/arch/s3c6400.h> - -#define APLL 0 -#define MPLL 1 -#define EPLL 2 - -/* ------------------------------------------------------------------------- */ -/* - * NOTE: This describes the proper use of this file. - * - * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL. - * - * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of - * the specified bus in HZ. - */ -/* ------------------------------------------------------------------------- */ - -static ulong get_PLLCLK(int pllreg) -{ - ulong r, m, p, s; - - switch (pllreg) { - case APLL: - r = APLL_CON_REG; - break; - case MPLL: - r = MPLL_CON_REG; - break; - case EPLL: - r = EPLL_CON0_REG; - break; - default: - hang(); - } - - m = (r >> 16) & 0x3ff; - p = (r >> 8) & 0x3f; - s = r & 0x7; - - return m * (CONFIG_SYS_CLK_FREQ / (p * (1 << s))); -} - -/* return ARMCORE frequency */ -ulong get_ARMCLK(void) -{ - ulong div; - - div = CLK_DIV0_REG; - - return get_PLLCLK(APLL) / ((div & 0x7) + 1); -} - -/* return FCLK frequency */ -ulong get_FCLK(void) -{ - return get_PLLCLK(APLL); -} - -/* return HCLK frequency */ -ulong get_HCLK(void) -{ - ulong fclk; - - uint hclkx2_div = ((CLK_DIV0_REG >> 9) & 0x7) + 1; - uint hclk_div = ((CLK_DIV0_REG >> 8) & 0x1) + 1; - - /* - * Bit 7 exists on s3c6410, and not on s3c6400, it is reserved on - * s3c6400 and is always 0, and it is indeed running in ASYNC mode - */ - if (OTHERS_REG & 0x80) - fclk = get_FCLK(); /* SYNC Mode */ - else - fclk = get_PLLCLK(MPLL); /* ASYNC Mode */ - - return fclk / (hclk_div * hclkx2_div); -} - -/* return PCLK frequency */ -ulong get_PCLK(void) -{ - ulong fclk; - uint hclkx2_div = ((CLK_DIV0_REG >> 9) & 0x7) + 1; - uint pre_div = ((CLK_DIV0_REG >> 12) & 0xf) + 1; - - if (OTHERS_REG & 0x80) - fclk = get_FCLK(); /* SYNC Mode */ - else - fclk = get_PLLCLK(MPLL); /* ASYNC Mode */ - - return fclk / (hclkx2_div * pre_div); -} - -/* return UCLK frequency */ -ulong get_UCLK(void) -{ - return get_PLLCLK(EPLL); -} - -int print_cpuinfo(void) -{ - printf("\nCPU: S3C6400@%luMHz\n", get_ARMCLK() / 1000000); - printf(" Fclk = %luMHz, Hclk = %luMHz, Pclk = %luMHz ", - get_FCLK() / 1000000, get_HCLK() / 1000000, - get_PCLK() / 1000000); - - if (OTHERS_REG & 0x80) - printf("(SYNC Mode) \n"); - else - printf("(ASYNC Mode) \n"); - return 0; -} diff --git a/arch/arm/cpu/arm1176/s3c64xx/timer.c b/arch/arm/cpu/arm1176/s3c64xx/timer.c deleted file mode 100644 index f16a37b..0000000 --- a/arch/arm/cpu/arm1176/s3c64xx/timer.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * (C) Copyright 2003 - * Texas Instruments <www.ti.com> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke <azu@sysgo.de> - * - * (C) Copyright 2002-2004 - * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> - * - * (C) Copyright 2004 - * Philippe Robin, ARM Ltd. <philippe.robin@arm.com> - * - * (C) Copyright 2008 - * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/proc-armv/ptrace.h> -#include <asm/arch/s3c6400.h> -#include <div64.h> - -static ulong timer_load_val; - -#define PRESCALER 167 - -static s3c64xx_timers *s3c64xx_get_base_timers(void) -{ - return (s3c64xx_timers *)ELFIN_TIMER_BASE; -} - -/* macro to read the 16 bit timer */ -static inline ulong read_timer(void) -{ - s3c64xx_timers *const timers = s3c64xx_get_base_timers(); - - return timers->TCNTO4; -} - -/* Internal tick units */ -/* Last decremneter snapshot */ -static unsigned long lastdec; -/* Monotonic incrementing timer */ -static unsigned long long timestamp; - -int timer_init(void) -{ - s3c64xx_timers *const timers = s3c64xx_get_base_timers(); - - /* use PWM Timer 4 because it has no output */ - /* - * We use the following scheme for the timer: - * Prescaler is hard fixed at 167, divider at 1/4. - * This gives at PCLK frequency 66MHz approx. 10us ticks - * The timer is set to wrap after 100s, at 66MHz this obviously - * happens after 10,000,000 ticks. A long variable can thus - * keep values up to 40,000s, i.e., 11 hours. This should be - * enough for most uses:-) Possible optimizations: select a - * binary-friendly frequency, e.g., 1ms / 128. Also calculate - * the prescaler automatically for other PCLK frequencies. - */ - timers->TCFG0 = PRESCALER << 8; - if (timer_load_val == 0) { - timer_load_val = get_PCLK() / PRESCALER * (100 / 4); /* 100s */ - timers->TCFG1 = (timers->TCFG1 & ~0xf0000) | 0x20000; - } - - /* load value for 10 ms timeout */ - lastdec = timers->TCNTB4 = timer_load_val; - /* auto load, manual update of Timer 4 */ - timers->TCON = (timers->TCON & ~0x00700000) | TCON_4_AUTO | - TCON_4_UPDATE; - - /* auto load, start Timer 4 */ - timers->TCON = (timers->TCON & ~0x00700000) | TCON_4_AUTO | COUNT_4_ON; - timestamp = 0; - - return 0; -} - -/* - * timer without interrupts - */ - -/* - * This function is derived from PowerPC code (read timebase as long long). - * On ARM it just returns the timer value. - */ -unsigned long long get_ticks(void) -{ - ulong now = read_timer(); - - if (lastdec >= now) { - /* normal mode */ - timestamp += lastdec - now; - } else { - /* we have an overflow ... */ - timestamp += lastdec + timer_load_val - now; - } - lastdec = now; - - return timestamp; -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk(void) -{ - /* We overrun in 100s */ - return (ulong)(timer_load_val / 100); -} - -ulong get_timer_masked(void) -{ - unsigned long long res = get_ticks(); - do_div (res, (timer_load_val / (100 * CONFIG_SYS_HZ))); - return res; -} - -ulong get_timer(ulong base) -{ - return get_timer_masked() - base; -} - -void __udelay(unsigned long usec) -{ - unsigned long long tmp; - ulong tmo; - - tmo = (usec + 9) / 10; - tmp = get_ticks() + tmo; /* get current timestamp */ - - while (get_ticks() < tmp)/* loop till event */ - /*NOP*/; -} diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index 3c291fb..1fc1da0 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -33,11 +33,8 @@ #include <asm-offsets.h> #include <config.h> #include <version.h> -#ifdef CONFIG_ENABLE_MMU -#include <asm/proc/domain.h> -#endif -#if !defined(CONFIG_ENABLE_MMU) && !defined(CONFIG_SYS_PHY_UBOOT_BASE) +#ifndef CONFIG_SYS_PHY_UBOOT_BASE #define CONFIG_SYS_PHY_UBOOT_BASE CONFIG_SYS_UBOOT_BASE #endif @@ -51,7 +48,7 @@ .globl _start _start: b reset -#ifndef CONFIG_NAND_SPL +#ifndef CONFIG_SPL_BUILD ldr pc, _undefined_instruction ldr pc, _software_interrupt ldr pc, _prefetch_abort @@ -98,15 +95,11 @@ _end_vect: .globl _TEXT_BASE _TEXT_BASE: +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) + .word CONFIG_SPL_TEXT_BASE +#else .word CONFIG_SYS_TEXT_BASE - -/* - * Below variable is very important because we use MMU in U-Boot. - * Without it, we cannot run code correctly before MMU is ON. - * by scsuh. - */ -_TEXT_PHY_BASE: - .word CONFIG_SYS_PHY_UBOOT_BASE +#endif /* * These are defined in the board-specific linker script. @@ -119,6 +112,10 @@ _TEXT_PHY_BASE: _bss_start_ofs: .word __bss_start - _start +.globl _image_copy_end_ofs +_image_copy_end_ofs: + .word __image_copy_end - _start + .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -164,7 +161,7 @@ cpu_init_crit: * When booting from NAND - it has definitely been a reset, so, no need * to flush caches and disable the MMU */ -#ifndef CONFIG_NAND_SPL +#ifndef CONFIG_SPL_BUILD /* * flush v4 I/D caches */ @@ -229,29 +226,24 @@ skip_tcmdisable: /*------------------------------------------------------------------------------*/ /* - * void relocate_code (addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. + * void relocate_code(addr_moni) * + * This function relocates the monitor code. */ .globl relocate_code relocate_code: - mov r4, r0 /* save addr_sp */ - mov r5, r1 /* save addr of gd */ - mov r6, r2 /* save addr of destination */ + mov r6, r0 /* save addr of destination */ adr r0, _start - cmp r0, r6 - moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ + subs r9, r6, r0 /* r9 <- relocation offset */ beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _bss_start_ofs + ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */ copy_loop: - ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r1!, {r9-r10} /* copy to target address [r1] */ + ldmia r0!, {r10-r11} /* copy from source address [r0] */ + stmia r1!, {r10-r11} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -260,7 +252,6 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ @@ -296,44 +287,6 @@ fixnext: blo fixloop #endif -#ifdef CONFIG_ENABLE_MMU -enable_mmu: - /* enable domain access */ - ldr r5, =0x0000ffff - mcr p15, 0, r5, c3, c0, 0 /* load domain access register */ - - /* Set the TTB register */ - ldr r0, _mmu_table_base - ldr r1, =CONFIG_SYS_PHY_UBOOT_BASE - ldr r2, =0xfff00000 - bic r0, r0, r2 - orr r1, r0, r1 - mcr p15, 0, r1, c2, c0, 0 - - /* Enable the MMU */ - mrc p15, 0, r0, c1, c0, 0 - orr r0, r0, #1 /* Set CR_M to enable MMU */ - - /* Prepare to enable the MMU */ - adr r1, skip_hw_init - and r1, r1, #0x3fc - ldr r2, _TEXT_BASE - ldr r3, =0xfff00000 - and r2, r2, r3 - orr r2, r2, r1 - b mmu_enable - - .align 5 - /* Run in a single cache-line */ -mmu_enable: - - mcr p15, 0, r0, c1, c0, 0 - nop - nop - mov pc, r2 -skip_hw_init: -#endif - relocate_done: bx lr @@ -345,52 +298,12 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start -#ifdef CONFIG_ENABLE_MMU -_mmu_table_base: - .word mmu_table -#endif - .globl c_runtime_cpu_setup c_runtime_cpu_setup: mov pc, lr -#ifndef CONFIG_NAND_SPL -/* - * we assume that cache operation is done before. (eg. cleanup_before_linux()) - * actually, we don't need to do anything about cache if not use d-cache in - * U-Boot. So, in this function we clean only MMU. by scsuh - * - * void theLastJump(void *kernel, int arch_num, uint boot_params); - */ -#ifdef CONFIG_ENABLE_MMU - .globl theLastJump -theLastJump: - mov r9, r0 - ldr r3, =0xfff00000 - ldr r4, _TEXT_PHY_BASE - adr r5, phy_last_jump - bic r5, r5, r3 - orr r5, r5, r4 - mov pc, r5 -phy_last_jump: - /* - * disable MMU stuff - */ - mrc p15, 0, r0, c1, c0, 0 - bic r0, r0, #0x00002300 /* clear bits 13, 9:8 (--V- --RS) */ - bic r0, r0, #0x00000087 /* clear bits 7, 2:0 (B--- -CAM) */ - orr r0, r0, #0x00000002 /* set bit 2 (A) Align */ - orr r0, r0, #0x00001000 /* set bit 12 (I) I-Cache */ - mcr p15, 0, r0, c1, c0, 0 - - mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ - - mov r0, #0 - mov pc, r9 -#endif - - +#ifndef CONFIG_SPL_BUILD /* ************************************************************************* * @@ -533,4 +446,4 @@ fiq: get_bad_stack bad_save_user_regs bl do_fiq -#endif /* CONFIG_NAND_SPL */ +#endif /* CONFIG_SPL_BUILD */ diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index 43bd6ed..9facc7e 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -85,7 +85,7 @@ _pad: .word 0x12345678 /* now 16*4=64 */ .globl _TEXT_BASE _TEXT_BASE: -#ifdef CONFIG_SPL_BUILD +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) .word CONFIG_SPL_TEXT_BASE #else .word CONFIG_SYS_TEXT_BASE @@ -101,6 +101,10 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start +.globl _image_copy_end_ofs +_image_copy_end_ofs: + .word __image_copy_end - _start + .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -152,29 +156,24 @@ reset: /*------------------------------------------------------------------------------*/ /* - * void relocate_code (addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. + * void relocate_code(addr_moni) * + * This function relocates the monitor code. */ .globl relocate_code relocate_code: - mov r4, r0 /* save addr_sp */ - mov r5, r1 /* save addr of gd */ - mov r6, r2 /* save addr of destination */ + mov r6, r0 /* save addr of destination */ adr r0, _start - cmp r0, r6 - moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ + subs r9, r6, r0 /* r9 <- relocation offset */ beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _bss_start_ofs + ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */ copy_loop: - ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r1!, {r9-r10} /* copy to target address [r1] */ + ldmia r0!, {r10-r11} /* copy from source address [r0] */ + stmia r1!, {r10-r11} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -183,7 +182,6 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ diff --git a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds index e483820..cf55bf7 100644 --- a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds +++ b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds @@ -31,18 +31,18 @@ SECTIONS . = ALIGN(4); .text : { - arch/arm/cpu/arm920t/start.o (.text) + arch/arm/cpu/arm920t/start.o (.text*) /* the EP93xx expects to find the pattern 'CRUS' at 0x1000 */ . = 0x1000; LONG(0x53555243) - *(.text) + *(.text*) } . = ALIGN(4); - .rodata : { *(.rodata) } + .rodata : { *(.rodata*) } . = ALIGN(4); - .data : { *(.data) } + .data : { *(.data*) } . = ALIGN(4); .got : { *(.got) } @@ -55,8 +55,11 @@ SECTIONS } . = ALIGN(4); + + __image_copy_end = .; + __bss_start = .; - .bss : { *(.bss) } + .bss : { *(.bss*) } __bss_end = .; _end = .; diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S index 2864d12..6250025 100644 --- a/arch/arm/cpu/arm920t/start.S +++ b/arch/arm/cpu/arm920t/start.S @@ -73,7 +73,11 @@ _fiq: .word fiq .globl _TEXT_BASE _TEXT_BASE: +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) + .word CONFIG_SPL_TEXT_BASE +#else .word CONFIG_SYS_TEXT_BASE +#endif /* * These are defined in the board-specific linker script. @@ -85,6 +89,10 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start +.globl _image_copy_end_ofs +_image_copy_end_ofs: + .word __image_copy_end - _start + .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -187,29 +195,24 @@ copyex: /*------------------------------------------------------------------------------*/ /* - * void relocate_code (addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. + * void relocate_code(addr_moni) * + * This function relocates the monitor code. */ .globl relocate_code relocate_code: - mov r4, r0 /* save addr_sp */ - mov r5, r1 /* save addr of gd */ - mov r6, r2 /* save addr of destination */ + mov r6, r0 /* save addr of destination */ adr r0, _start - cmp r0, r6 - moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ + subs r9, r6, r0 /* r9 <- relocation offset */ beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _bss_start_ofs + ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */ copy_loop: - ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r1!, {r9-r10} /* copy to target address [r1] */ + ldmia r0!, {r10-r11} /* copy from source address [r0] */ + stmia r1!, {r10-r11} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -218,7 +221,6 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S index 827fee2..021e241 100644 --- a/arch/arm/cpu/arm925t/start.S +++ b/arch/arm/cpu/arm925t/start.S @@ -79,7 +79,11 @@ _fiq: .word fiq .globl _TEXT_BASE _TEXT_BASE: +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) + .word CONFIG_SPL_TEXT_BASE +#else .word CONFIG_SYS_TEXT_BASE +#endif /* * These are defined in the board-specific linker script. @@ -91,6 +95,10 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start +.globl _image_copy_end_ofs +_image_copy_end_ofs: + .word __image_copy_end - _start + .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -177,29 +185,24 @@ poll1: /*------------------------------------------------------------------------------*/ /* - * void relocate_code (addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. + * void relocate_code(addr_moni) * + * This function relocates the monitor code. */ .globl relocate_code relocate_code: - mov r4, r0 /* save addr_sp */ - mov r5, r1 /* save addr of gd */ - mov r6, r2 /* save addr of destination */ + mov r6, r0 /* save addr of destination */ adr r0, _start - cmp r0, r6 - moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ + subs r9, r6, r0 /* r9 <- relocation offset */ beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _bss_start_ofs + ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */ copy_loop: - ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r1!, {r9-r10} /* copy to target address [r1] */ + ldmia r0!, {r10-r11} /* copy from source address [r0] */ + stmia r1!, {r10-r11} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -208,7 +211,6 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ diff --git a/arch/arm/cpu/arm926ejs/config.mk b/arch/arm/cpu/arm926ejs/config.mk index 6a3a1bb..f0e31d1 100644 --- a/arch/arm/cpu/arm926ejs/config.mk +++ b/arch/arm/cpu/arm926ejs/config.mk @@ -33,7 +33,11 @@ PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-mali PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) ifneq ($(CONFIG_IMX_CONFIG),) - +ifdef CONFIG_SPL +ifdef CONFIG_SPL_BUILD +ALL-y += $(OBJTREE)/SPL +endif +else ALL-y += $(obj)u-boot.imx - +endif endif diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c index fdac73c..bc2d69c 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c @@ -46,17 +46,17 @@ static uint32_t dram_vals[] = { 0x00000000, 0x00000000, 0x00010101, 0x01010101, 0x000f0f01, 0x0f02020a, 0x00000000, 0x00010101, 0x00000100, 0x00000100, 0x00000000, 0x00000002, - 0x01010000, 0x05060302, 0x06005003, 0x0a0000c8, - 0x02009c40, 0x0000030c, 0x0036a609, 0x031a0612, + 0x01010000, 0x07080403, 0x06005003, 0x0a0000c8, + 0x02009c40, 0x0002030c, 0x0036a609, 0x031a0612, 0x02030202, 0x00c8001c, 0x00000000, 0x00000000, 0x00012100, 0xffff0303, 0x00012100, 0xffff0303, 0x00012100, 0xffff0303, 0x00012100, 0xffff0303, 0x00000003, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000612, 0x01000F02, - 0x06120612, 0x00000200, 0x00020007, 0xf5014b27, - 0xf5014b27, 0xf5014b27, 0xf5014b27, 0x07000300, - 0x07000300, 0x07000300, 0x07000300, 0x00000006, + 0x06120612, 0x00000200, 0x00020007, 0xf4004a27, + 0xf4004a27, 0xf4004a27, 0xf4004a27, 0x07000300, + 0x07000300, 0x07400300, 0x07400300, 0x00000005, 0x00000000, 0x00000000, 0x01000000, 0x01020408, 0x08040201, 0x000f1133, 0x00000000, 0x00001f04, 0x00001f04, 0x00001f04, 0x00001f04, 0x00001f04, @@ -77,14 +77,14 @@ static uint32_t dram_vals[] = { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, - 0x00000000, 0x00000000, 0x00010000, 0x00020304, - 0x00000004, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00010000, 0x00030404, + 0x00000003, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x01010000, 0x01000000, 0x03030000, 0x00010303, 0x01020202, 0x00000000, 0x02040303, 0x21002103, 0x00061200, - 0x06120612, 0x04320432, 0x04320432, 0x00040004, + 0x06120612, 0x04420442, 0x04420442, 0x00040004, 0x00040004, 0x00000000, 0x00000000, 0x00000000, - 0x00000000, 0x00010001 + 0x00000000, 0xffffffff /* * i.MX23 DDR at 133MHz diff --git a/arch/arm/cpu/arm926ejs/mxs/start.S b/arch/arm/cpu/arm926ejs/mxs/start.S index 373e6d8..bf54423 100644 --- a/arch/arm/cpu/arm926ejs/mxs/start.S +++ b/arch/arm/cpu/arm926ejs/mxs/start.S @@ -119,7 +119,11 @@ fiq: .globl _TEXT_BASE _TEXT_BASE: +#ifdef CONFIG_SPL_TEXT_BASE + .word CONFIG_SPL_TEXT_BASE +#else .word CONFIG_SYS_TEXT_BASE +#endif /* * These are defined in the board-specific linker script. diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds index 67b204e..673c725 100644 --- a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds +++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds @@ -37,8 +37,8 @@ SECTIONS . = ALIGN(4); .text : { - arch/arm/cpu/arm926ejs/mxs/start.o (.text) - *(.text) + arch/arm/cpu/arm926ejs/mxs/start.o (.text*) + *(.text*) } . = ALIGN(4); @@ -46,7 +46,7 @@ SECTIONS . = ALIGN(4); .data : { - *(.data) + *(.data*) } . = ALIGN(4); diff --git a/arch/arm/cpu/arm926ejs/omap/timer.c b/arch/arm/cpu/arm926ejs/omap/timer.c index 34ec7b2..16530b0 100644 --- a/arch/arm/cpu/arm926ejs/omap/timer.c +++ b/arch/arm/cpu/arm926ejs/omap/timer.c @@ -36,11 +36,14 @@ */ #include <common.h> +#include <asm/io.h> -#define TIMER_LOAD_VAL 0xffffffff +#define TIMER_CLOCK (CONFIG_SYS_CLK_FREQ / (2 << CONFIG_SYS_PTV)) +#define TIMER_LOAD_VAL 0xffffffff /* macro to read the 32 bit timer */ -#define READ_TIMER (*(volatile ulong *)(CONFIG_SYS_TIMERBASE+8)) +#define READ_TIMER readl(CONFIG_SYS_TIMERBASE+8) \ + / (TIMER_CLOCK / CONFIG_SYS_HZ) DECLARE_GLOBAL_DATA_PTR; @@ -114,7 +117,8 @@ ulong get_timer_masked (void) * (TLV-now) amount of time after passing though -1 * nts = new "advancing time stamp"...it could also roll and cause problems. */ - timestamp += lastdec + TIMER_LOAD_VAL - now; + timestamp += lastdec + (TIMER_LOAD_VAL / (TIMER_CLOCK / + CONFIG_SYS_HZ)) - now; } lastdec = now; @@ -160,8 +164,5 @@ unsigned long long get_ticks(void) */ ulong get_tbclk (void) { - ulong tbclk; - - tbclk = CONFIG_SYS_HZ; - return tbclk; + return CONFIG_SYS_HZ; } diff --git a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds index 7405917..967a135 100644 --- a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds +++ b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds @@ -37,8 +37,8 @@ SECTIONS . = ALIGN(4); .text : { - arch/arm/cpu/arm926ejs/spear/start.o (.text) - *(.text) + arch/arm/cpu/arm926ejs/spear/start.o (.text*) + *(.text*) } . = ALIGN(4); @@ -46,7 +46,7 @@ SECTIONS . = ALIGN(4); .data : { - *(.data) + *(.data*) } . = ALIGN(4); diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index f5d1582..4c567110 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -120,15 +120,11 @@ _fiq: .globl _TEXT_BASE _TEXT_BASE: -#ifdef CONFIG_NAND_SPL /* deprecated, use instead CONFIG_SPL_BUILD */ - .word CONFIG_SYS_TEXT_BASE -#else -#ifdef CONFIG_SPL_BUILD +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) .word CONFIG_SPL_TEXT_BASE #else .word CONFIG_SYS_TEXT_BASE #endif -#endif /* * These are defined in the board-specific linker script. @@ -140,6 +136,10 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start +.globl _image_copy_end_ofs +_image_copy_end_ofs: + .word __image_copy_end - _start + .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -148,12 +148,6 @@ _bss_end_ofs: _end_ofs: .word _end - _start -#ifdef CONFIG_NAND_U_BOOT -.globl _end -_end: - .word __bss_end -#endif - #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START @@ -196,32 +190,25 @@ reset: /*------------------------------------------------------------------------------*/ -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_NAND_SPL) /* - * void relocate_code (addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. + * void relocate_code(addr_moni) * + * This function relocates the monitor code. */ .globl relocate_code relocate_code: - mov r4, r0 /* save addr_sp */ - mov r5, r1 /* save addr of gd */ - mov r6, r2 /* save addr of destination */ + mov r6, r0 /* save addr of destination */ adr r0, _start - sub r9, r6, r0 /* r9 <- relocation offset */ - cmp r0, r6 - moveq r9, #0 /* no relocation. offset(r9) = 0 */ + subs r9, r6, r0 /* r9 <- relocation offset */ beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy loop */ - ldr r3, _bss_start_ofs + ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */ copy_loop: - ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r1!, {r9-r10} /* copy to target address [r1] */ + ldmia r0!, {r10-r11} /* copy from source address [r0] */ + stmia r1!, {r10-r11} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -230,7 +217,6 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ @@ -270,6 +256,8 @@ relocate_done: bx lr +#ifndef CONFIG_SPL_BUILD + _rel_dyn_start_ofs: .word __rel_dyn_start - _start _rel_dyn_end_ofs: diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S index 9dec35b..9c2b70d 100644 --- a/arch/arm/cpu/arm946es/start.S +++ b/arch/arm/cpu/arm946es/start.S @@ -89,7 +89,11 @@ _vectors_end: .globl _TEXT_BASE _TEXT_BASE: +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) + .word CONFIG_SPL_TEXT_BASE +#else .word CONFIG_SYS_TEXT_BASE +#endif /* * These are defined in the board-specific linker script. @@ -101,6 +105,10 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start +.globl _image_copy_end_ofs +_image_copy_end_ofs: + .word __image_copy_end - _start + .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -152,29 +160,24 @@ reset: /*------------------------------------------------------------------------------*/ /* - * void relocate_code (addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. + * void relocate_code(addr_moni) * + * This function relocates the monitor code. */ .globl relocate_code relocate_code: - mov r4, r0 /* save addr_sp */ - mov r5, r1 /* save addr of gd */ - mov r6, r2 /* save addr of destination */ + mov r6, r0 /* save addr of destination */ adr r0, _start - cmp r0, r6 - moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ + subs r9, r6, r0 /* r9 <- relocation offset */ beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _bss_start_ofs + ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */ copy_loop: - ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r1!, {r9-r10} /* copy to target address [r1] */ + ldmia r0!, {r10-r11} /* copy from source address [r0] */ + stmia r1!, {r10-r11} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -183,7 +186,6 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S index 04d0845..5e8c528 100644 --- a/arch/arm/cpu/arm_intcm/start.S +++ b/arch/arm/cpu/arm_intcm/start.S @@ -85,7 +85,11 @@ _fiq: .globl _TEXT_BASE _TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE /* address of _start in the linked image */ +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) + .word CONFIG_SPL_TEXT_BASE +#else + .word CONFIG_SYS_TEXT_BASE +#endif /* * These are defined in the board-specific linker script. @@ -97,6 +101,10 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start +.globl _image_copy_end_ofs +_image_copy_end_ofs: + .word __image_copy_end - _start + .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -148,29 +156,24 @@ reset: /*------------------------------------------------------------------------------*/ /* - * void relocate_code (addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. + * void relocate_code(addr_moni) * + * This function relocates the monitor code. */ .globl relocate_code relocate_code: - mov r4, r0 /* save addr_sp */ - mov r5, r1 /* save addr of gd */ - mov r6, r2 /* save addr of destination */ + mov r6, r0 /* save addr of destination */ adr r0, _start - cmp r0, r6 - moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ + subs r9, r6, r0 /* r9 <- relocation offset */ beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _bss_start_ofs + ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */ copy_loop: - ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r1!, {r9-r10} /* copy to target address [r1] */ + ldmia r0!, {r10-r11} /* copy from source address [r0] */ + stmia r1!, {r10-r11} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -179,7 +182,6 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ diff --git a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c index afc0d92..a1efc75 100644 --- a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c +++ b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c @@ -195,6 +195,11 @@ static void enable_per_clocks(void) while (readl(&cmper->mmc0clkctrl) != PRCM_MOD_EN) ; + /* MMC1 */ + writel(PRCM_MOD_EN, &cmper->mmc1clkctrl); + while (readl(&cmper->mmc1clkctrl) != PRCM_MOD_EN) + ; + /* i2c0 */ writel(PRCM_MOD_EN, &cmwkup->wkup_i2c0ctrl); while (readl(&cmwkup->wkup_i2c0ctrl) != PRCM_MOD_EN) diff --git a/arch/arm/cpu/armv7/am33xx/elm.c b/arch/arm/cpu/armv7/am33xx/elm.c index 9eed23d..41df612 100644 --- a/arch/arm/cpu/armv7/am33xx/elm.c +++ b/arch/arm/cpu/armv7/am33xx/elm.c @@ -33,7 +33,7 @@ #include <asm/io.h> #include <asm/errno.h> #include <asm/arch/cpu.h> -#include <asm/arch/omap_gpmc.h> +#include <asm/omap_gpmc.h> #include <asm/arch/elm.h> #define ELM_DEFAULT_POLY (0) diff --git a/arch/arm/cpu/armv7/config.mk b/arch/arm/cpu/armv7/config.mk index 9c3e2f3..56b8053 100644 --- a/arch/arm/cpu/armv7/config.mk +++ b/arch/arm/cpu/armv7/config.mk @@ -40,5 +40,11 @@ PF_NO_UNALIGNED := $(call cc-option, -mno-unaligned-access,) PLATFORM_NO_UNALIGNED := $(PF_NO_UNALIGNED) ifneq ($(CONFIG_IMX_CONFIG),) +ifdef CONFIG_SPL +ifdef CONFIG_SPL_BUILD +ALL-y += $(OBJTREE)/SPL +endif +else ALL-y += $(obj)u-boot.imx endif +endif diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c index 956427c..223660a 100644 --- a/arch/arm/cpu/armv7/exynos/clock.c +++ b/arch/arm/cpu/armv7/exynos/clock.c @@ -27,6 +27,49 @@ #include <asm/arch/clk.h> #include <asm/arch/periph.h> +/* * + * This structure is to store the src bit, div bit and prediv bit + * positions of the peripheral clocks of the src and div registers + */ +struct clk_bit_info { + int8_t src_bit; + int8_t div_bit; + int8_t prediv_bit; +}; + +/* src_bit div_bit prediv_bit */ +static struct clk_bit_info clk_bit_info[PERIPH_ID_COUNT] = { + {0, 0, -1}, + {4, 4, -1}, + {8, 8, -1}, + {12, 12, -1}, + {0, 0, 8}, + {4, 16, 24}, + {8, 0, 8}, + {12, 16, 24}, + {-1, -1, -1}, + {16, 0, 8}, + {20, 16, 24}, + {24, 0, 8}, + {0, 0, 4}, + {4, 12, 16}, + {-1, -1, -1}, + {-1, -1, -1}, + {-1, 24, 0}, + {-1, 24, 0}, + {-1, 24, 0}, + {-1, 24, 0}, + {-1, 24, 0}, + {-1, 24, 0}, + {-1, 24, 0}, + {-1, 24, 0}, + {24, 0, -1}, + {24, 0, -1}, + {24, 0, -1}, + {24, 0, -1}, + {24, 0, -1}, +}; + /* Epll Clock division values to achive different frequency output */ static struct set_epll_con_val exynos5_epll_div[] = { { 192000000, 0, 48, 3, 1, 0 }, @@ -201,6 +244,107 @@ static unsigned long exynos5_get_pll_clk(int pllreg) return fout; } +static unsigned long exynos5_get_periph_rate(int peripheral) +{ + struct clk_bit_info *bit_info = &clk_bit_info[peripheral]; + unsigned long sclk, sub_clk; + unsigned int src, div, sub_div; + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + + switch (peripheral) { + case PERIPH_ID_UART0: + case PERIPH_ID_UART1: + case PERIPH_ID_UART2: + case PERIPH_ID_UART3: + src = readl(&clk->src_peric0); + div = readl(&clk->div_peric0); + break; + case PERIPH_ID_PWM0: + case PERIPH_ID_PWM1: + case PERIPH_ID_PWM2: + case PERIPH_ID_PWM3: + case PERIPH_ID_PWM4: + src = readl(&clk->src_peric0); + div = readl(&clk->div_peric3); + break; + case PERIPH_ID_SPI0: + case PERIPH_ID_SPI1: + src = readl(&clk->src_peric1); + div = readl(&clk->div_peric1); + break; + case PERIPH_ID_SPI2: + src = readl(&clk->src_peric1); + div = readl(&clk->div_peric2); + break; + case PERIPH_ID_SPI3: + case PERIPH_ID_SPI4: + src = readl(&clk->sclk_src_isp); + div = readl(&clk->sclk_div_isp); + break; + case PERIPH_ID_SDMMC0: + case PERIPH_ID_SDMMC1: + case PERIPH_ID_SDMMC2: + case PERIPH_ID_SDMMC3: + src = readl(&clk->src_fsys); + div = readl(&clk->div_fsys1); + break; + case PERIPH_ID_I2C0: + case PERIPH_ID_I2C1: + case PERIPH_ID_I2C2: + case PERIPH_ID_I2C3: + case PERIPH_ID_I2C4: + case PERIPH_ID_I2C5: + case PERIPH_ID_I2C6: + case PERIPH_ID_I2C7: + sclk = exynos5_get_pll_clk(MPLL); + sub_div = ((readl(&clk->div_top1) >> bit_info->div_bit) + & 0x7) + 1; + div = ((readl(&clk->div_top0) >> bit_info->prediv_bit) + & 0x7) + 1; + return (sclk / sub_div) / div; + default: + debug("%s: invalid peripheral %d", __func__, peripheral); + return -1; + }; + + src = (src >> bit_info->src_bit) & 0xf; + + switch (src) { + case EXYNOS_SRC_MPLL: + sclk = exynos5_get_pll_clk(MPLL); + break; + case EXYNOS_SRC_EPLL: + sclk = exynos5_get_pll_clk(EPLL); + break; + case EXYNOS_SRC_VPLL: + sclk = exynos5_get_pll_clk(VPLL); + break; + default: + return 0; + } + + /* Ratio clock division for this peripheral */ + sub_div = (div >> bit_info->div_bit) & 0xf; + sub_clk = sclk / (sub_div + 1); + + /* Pre-ratio clock division for SDMMC0 and 2 */ + if (peripheral == PERIPH_ID_SDMMC0 || peripheral == PERIPH_ID_SDMMC2) { + div = (div >> bit_info->prediv_bit) & 0xff; + return sub_clk / (div + 1); + } + + return sub_clk; +} + +unsigned long clock_get_periph_rate(int peripheral) +{ + if (cpu_is_exynos5()) + return exynos5_get_periph_rate(peripheral); + else + return 0; +} + /* exynos4: return ARM clock frequency */ static unsigned long exynos4_get_arm_clk(void) { @@ -324,27 +468,6 @@ static unsigned long exynos4x12_get_pwm_clk(void) return pclk; } -/* exynos5: return pwm clock frequency */ -static unsigned long exynos5_get_pwm_clk(void) -{ - struct exynos5_clock *clk = - (struct exynos5_clock *)samsung_get_base_clock(); - unsigned long pclk, sclk; - unsigned int ratio; - - /* - * CLK_DIV_PERIC3 - * PWM_RATIO [3:0] - */ - ratio = readl(&clk->div_peric3); - ratio = ratio & 0xf; - sclk = get_pll_clk(MPLL); - - pclk = sclk / (ratio + 1); - - return pclk; -} - /* exynos4: return uart clock frequency */ static unsigned long exynos4_get_uart_clk(int dev_index) { @@ -1210,7 +1333,7 @@ unsigned long get_i2c_clk(void) unsigned long get_pwm_clk(void) { if (cpu_is_exynos5()) - return exynos5_get_pwm_clk(); + return clock_get_periph_rate(PERIPH_ID_PWM0); else { if (proid_is_exynos4412()) return exynos4x12_get_pwm_clk(); diff --git a/arch/arm/cpu/armv7/exynos/soc.c b/arch/arm/cpu/armv7/exynos/soc.c index ab65b8d..e948e4c 100644 --- a/arch/arm/cpu/armv7/exynos/soc.c +++ b/arch/arm/cpu/armv7/exynos/soc.c @@ -23,6 +23,14 @@ #include <common.h> #include <asm/io.h> +#include <asm/system.h> + +enum l2_cache_params { + CACHE_TAG_RAM_SETUP = (1 << 9), + CACHE_DATA_RAM_SETUP = (1 << 5), + CACHE_TAG_RAM_LATENCY = (2 << 6), + CACHE_DATA_RAM_LATENCY = (2 << 0) +}; void reset_cpu(ulong addr) { @@ -36,3 +44,31 @@ void enable_caches(void) dcache_enable(); } #endif + +#ifndef CONFIG_SYS_L2CACHE_OFF +/* + * Set L2 cache parameters + */ +static void exynos5_set_l2cache_params(void) +{ + unsigned int val = 0; + + asm volatile("mrc p15, 1, %0, c9, c0, 2\n" : "=r"(val)); + + val |= CACHE_TAG_RAM_SETUP | + CACHE_DATA_RAM_SETUP | + CACHE_TAG_RAM_LATENCY | + CACHE_DATA_RAM_LATENCY; + + asm volatile("mcr p15, 1, %0, c9, c0, 2\n" : : "r"(val)); +} + +/* + * Sets L2 cache related parameters before enabling data cache + */ +void v7_outer_cache_enable(void) +{ + if (cpu_is_exynos5()) + exynos5_set_l2cache_params(); +} +#endif diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S index 6d9396a9..dfce0ca 100644 --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -309,8 +309,7 @@ setup_pll_func: ldr r0, =CCM_BASE_ADDR ldr r1, =0x00015154 str r1, [r0, #CLKCTL_CBCMR] - ldr r1, =0x02888945 - orr r1, r1, #(1 << 16) + ldr r1, =0x02898945 str r1, [r0, #CLKCTL_CBCDR] /* make sure change is effective */ 1: ldr r1, [r0, #CLKCTL_CDHIPR] @@ -321,10 +320,7 @@ setup_pll_func: /* Switch peripheral to PLL2 */ ldr r0, =CCM_BASE_ADDR - ldr r1, =0x00808145 - orr r1, r1, #(2 << 10) - orr r1, r1, #(0 << 16) - orr r1, r1, #(1 << 19) + ldr r1, =0x00888945 str r1, [r0, #CLKCTL_CBCDR] ldr r1, =0x00016154 diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 193ba12..2ea8ca3 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -61,6 +61,18 @@ u32 get_cpu_rev(void) return (type << 12) | (reg + 0x10); } +#ifdef CONFIG_REVISION_TAG +u32 __weak get_board_rev(void) +{ + u32 cpurev = get_cpu_rev(); + u32 type = ((cpurev >> 12) & 0xff); + if (type == MXC_CPU_MX6SOLO) + cpurev = (MXC_CPU_MX6DL) << 12 | (cpurev & 0xFFF); + + return cpurev; +} +#endif + void init_aips(void) { struct aipstz_regs *aips1, *aips2; diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c index 9ed1899..2b955c7 100644 --- a/arch/arm/cpu/armv7/omap-common/clocks-common.c +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c @@ -612,7 +612,7 @@ void freq_update_core(void) /* * Putting EMIF in HW_AUTO is seen to be causing issues with - * EMIF clocks and the master DLL. Put EMIF in SW_WKUP + * EMIF clocks and the master DLL. Keep EMIF in SW_WKUP * in OMAP5430 ES1.0 silicon */ if (omap_rev != OMAP5430_ES1_0) { @@ -659,7 +659,7 @@ void setup_clocks_for_console(void) MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << MODULE_CLKCTRL_MODULEMODE_SHIFT); - clrsetbits_le32((*prcm)->cm_l4per_uart3_clkctrl, + clrsetbits_le32((*prcm)->cm_l4per_uart4_clkctrl, MODULE_CLKCTRL_MODULEMODE_MASK, MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << MODULE_CLKCTRL_MODULEMODE_SHIFT); diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c index 9eb1279..cdb4439 100644 --- a/arch/arm/cpu/armv7/omap-common/emif-common.c +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -655,20 +655,27 @@ static u32 get_ddr_phy_ctrl_1(u32 freq, u8 RL) return phy; } -static u32 get_emif_mem_size(struct emif_device_details *devices) +static u32 get_emif_mem_size(u32 base) { u32 size_mbytes = 0, temp; + struct emif_device_details dev_details; + struct lpddr2_device_details cs0_dev_details, cs1_dev_details; + u32 emif_nr = emif_num(base); - if (!devices) - return 0; + emif_reset_phy(base); + dev_details.cs0_device_details = emif_get_device_details(emif_nr, CS0, + &cs0_dev_details); + dev_details.cs1_device_details = emif_get_device_details(emif_nr, CS1, + &cs1_dev_details); + emif_reset_phy(base); - if (devices->cs0_device_details) { - temp = devices->cs0_device_details->density; + if (dev_details.cs0_device_details) { + temp = dev_details.cs0_device_details->density; size_mbytes += lpddr2_density_2_size_in_mbytes[temp]; } - if (devices->cs1_device_details) { - temp = devices->cs1_device_details->density; + if (dev_details.cs1_device_details) { + temp = dev_details.cs1_device_details->density; size_mbytes += lpddr2_density_2_size_in_mbytes[temp]; } /* convert to bytes */ @@ -1040,13 +1047,9 @@ static void do_sdram_init(u32 base) /* Return if no devices on this EMIF */ if (!dev_details.cs0_device_details && !dev_details.cs1_device_details) { - emif_sizes[emif_nr - 1] = 0; return; } - if (!in_sdram) - emif_sizes[emif_nr - 1] = get_emif_mem_size(&dev_details); - /* * Get device timings: * - Default timings specified by JESD209-2 if @@ -1108,8 +1111,8 @@ void dmm_init(u32 base) mapped_size = 0; section_cnt = 3; sys_addr = CONFIG_SYS_SDRAM_BASE; - emif1_size = emif_sizes[0]; - emif2_size = emif_sizes[1]; + emif1_size = get_emif_mem_size(EMIF1_BASE); + emif2_size = get_emif_mem_size(EMIF2_BASE); debug("emif1_size 0x%x emif2_size 0x%x\n", emif1_size, emif2_size); if (!emif1_size && !emif2_size) diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S index b933fe8..90b3c8a 100644 --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S @@ -60,10 +60,14 @@ ENTRY(save_boot_params) ldr r3, =boot_params strb r2, [r3, #BOOT_DEVICE_OFFSET] @ spl_boot_device <- r1 - /* boot mode is passed only for devices that can raw/fat mode */ - cmp r2, #BOOT_DEVICE_XIP + /* + * boot mode is only valid for device that can be raw or FAT booted. + * in other cases it may be fatal to look. While platforms differ + * in the values used for each MMC slot, they are contiguous. + */ + cmp r2, #MMC_BOOT_DEVICES_START blt 2f - cmp r2, #BOOT_DEVICE_MMC2 + cmp r2, #MMC_BOOT_DEVICES_END bgt 2f /* Store the boot mode (raw/FAT) in omap_bootmode */ ldr r2, [r0, #DEV_DESC_PTR_OFFSET] @ get the device descriptor ptr diff --git a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds index efae381..bd218c0 100644 --- a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds +++ b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds @@ -38,7 +38,7 @@ SECTIONS .text : { __start = .; - arch/arm/cpu/armv7/start.o (.text) + arch/arm/cpu/armv7/start.o (.text*) *(.text*) } >.sram diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index c6d9a42..b72fadc 100644 --- a/arch/arm/cpu/armv7/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -328,14 +328,25 @@ void abort(void) *****************************************************************************/ static int do_switch_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { - if (argc != 2) + if (argc < 2 || argc > 3) goto usage; - if (strncmp(argv[1], "hw", 2) == 0) - omap_nand_switch_ecc(1); - else if (strncmp(argv[1], "sw", 2) == 0) - omap_nand_switch_ecc(0); - else + + if (strncmp(argv[1], "hw", 2) == 0) { + if (argc == 2) { + omap_nand_switch_ecc(1, 1); + } else { + if (strncmp(argv[2], "hamming", 7) == 0) + omap_nand_switch_ecc(1, 1); + else if (strncmp(argv[2], "bch8", 4) == 0) + omap_nand_switch_ecc(1, 8); + else + goto usage; + } + } else if (strncmp(argv[1], "sw", 2) == 0) { + omap_nand_switch_ecc(0, 0); + } else { goto usage; + } return 0; @@ -345,9 +356,13 @@ usage: } U_BOOT_CMD( - nandecc, 2, 1, do_switch_ecc, + nandecc, 3, 1, do_switch_ecc, "switch OMAP3 NAND ECC calculation algorithm", - "[hw/sw] - Switch between NAND hardware (hw) or software (sw) ecc algorithm" + "hw [hamming|bch8] - Switch between NAND hardware 1-bit hamming and" + " 8-bit BCH\n" + " ecc calculation (second parameter may" + " be omitted).\n" + "nandecc sw - Switch to NAND software ecc algorithm." ); #endif /* CONFIG_NAND_OMAP_GPMC & !CONFIG_SPL_BUILD */ diff --git a/arch/arm/cpu/armv7/omap4/emif.c b/arch/arm/cpu/armv7/omap4/emif.c index ca4823d..53f6063 100644 --- a/arch/arm/cpu/armv7/omap4/emif.c +++ b/arch/arm/cpu/armv7/omap4/emif.c @@ -33,7 +33,6 @@ #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS u32 *const T_num = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_NUM; u32 *const T_den = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_DEN; -u32 *const emif_sizes = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_SIZE; #endif #ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c index 7551b98..04977b4 100644 --- a/arch/arm/cpu/armv7/omap4/hw_data.c +++ b/arch/arm/cpu/armv7/omap4/hw_data.c @@ -216,14 +216,14 @@ struct dplls omap4460_dplls = { struct pmic_data twl6030_4430es1 = { .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV, - .step = 12660, /* 10 mV represented in uV */ + .step = 12660, /* 12.66 mV represented in uV */ /* The code starts at 1 not 0 */ .start_code = 1, }; struct pmic_data twl6030 = { .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV, - .step = 12660, /* 10 mV represented in uV */ + .step = 12660, /* 12.66 mV represented in uV */ /* The code starts at 1 not 0 */ .start_code = 1, }; @@ -271,11 +271,11 @@ struct vcores_data omap4460_volts = { .core.value = 1200, .core.addr = SMPS_REG_ADDR_VCORE1, - .core.pmic = &tps62361, + .core.pmic = &twl6030, .mm.value = 1200, .mm.addr = SMPS_REG_ADDR_VCORE2, - .mm.pmic = &tps62361, + .mm.pmic = &twl6030, }; /* diff --git a/arch/arm/cpu/armv7/omap5/emif.c b/arch/arm/cpu/armv7/omap5/emif.c index 8019ffe..3f37abd 100644 --- a/arch/arm/cpu/armv7/omap5/emif.c +++ b/arch/arm/cpu/armv7/omap5/emif.c @@ -34,7 +34,6 @@ #define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg)) static u32 *const T_num = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_T_NUM; static u32 *const T_den = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_T_DEN; -static u32 *const emif_sizes = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_SIZE; #endif #ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS diff --git a/arch/arm/cpu/armv7/s5p-common/pwm.c b/arch/arm/cpu/armv7/s5p-common/pwm.c index 44d7bc3..6f401b8 100644 --- a/arch/arm/cpu/armv7/s5p-common/pwm.c +++ b/arch/arm/cpu/armv7/s5p-common/pwm.c @@ -70,7 +70,7 @@ static unsigned long pwm_calc_tin(int pwm_id, unsigned long freq) return tin_parent_rate / 16; } -#define NS_IN_HZ (1000000000UL) +#define NS_IN_SEC 1000000000UL int pwm_config(int pwm_id, int duty_ns, int period_ns) { @@ -79,7 +79,7 @@ int pwm_config(int pwm_id, int duty_ns, int period_ns) unsigned int offset; unsigned long tin_rate; unsigned long tin_ns; - unsigned long period; + unsigned long frequency; unsigned long tcon; unsigned long tcnt; unsigned long tcmp; @@ -89,34 +89,24 @@ int pwm_config(int pwm_id, int duty_ns, int period_ns) * fact that anything faster than 1GHz is easily representable * by 32bits. */ - if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ) + if (period_ns > NS_IN_SEC || duty_ns > NS_IN_SEC || period_ns == 0) return -ERANGE; if (duty_ns > period_ns) return -EINVAL; - period = NS_IN_HZ / period_ns; + frequency = NS_IN_SEC / period_ns; /* Check to see if we are changing the clock rate of the PWM */ - tin_rate = pwm_calc_tin(pwm_id, period); + tin_rate = pwm_calc_tin(pwm_id, frequency); - tin_ns = NS_IN_HZ / tin_rate; + tin_ns = NS_IN_SEC / tin_rate; tcnt = period_ns / tin_ns; /* Note, counters count down */ tcmp = duty_ns / tin_ns; tcmp = tcnt - tcmp; - /* - * the pwm hw only checks the compare register after a decrement, - * so the pin never toggles if tcmp = tcnt - */ - if (tcmp == tcnt) - tcmp--; - - if (tcmp < 0) - tcmp = 0; - /* Update the PWM register block. */ offset = pwm_id * 3; if (pwm_id < 4) { @@ -143,7 +133,7 @@ int pwm_init(int pwm_id, int div, int invert) u32 val; const struct s5p_timer *pwm = (struct s5p_timer *)samsung_get_base_timer(); - unsigned long timer_rate_hz; + unsigned long ticks_per_period; unsigned int offset, prescaler; /* @@ -167,14 +157,24 @@ int pwm_init(int pwm_id, int div, int invert) val |= (div & 0xf) << MUX_DIV_SHIFT(pwm_id); writel(val, &pwm->tcfg1); - timer_rate_hz = get_pwm_clk() / ((prescaler + 1) * - (div + 1)); + if (pwm_id == 4) { + /* + * TODO(sjg): Use this as a countdown timer for now. We count + * down from the maximum value to 0, then reset. + */ + ticks_per_period = -1UL; + } else { + const unsigned long pwm_hz = 1000; + unsigned long timer_rate_hz = get_pwm_clk() / + ((prescaler + 1) * (1 << div)); - timer_rate_hz = timer_rate_hz / CONFIG_SYS_HZ; + ticks_per_period = timer_rate_hz / pwm_hz; + } /* set count value */ offset = pwm_id * 3; - writel(timer_rate_hz, &pwm->tcntb0 + offset); + + writel(ticks_per_period, &pwm->tcntb0 + offset); val = readl(&pwm->tcon) & ~(0xf << TCON_OFFSET(pwm_id)); if (invert && (pwm_id < 4)) diff --git a/arch/arm/cpu/armv7/s5p-common/timer.c b/arch/arm/cpu/armv7/s5p-common/timer.c index e78c716..6a0fa58 100644 --- a/arch/arm/cpu/armv7/s5p-common/timer.c +++ b/arch/arm/cpu/armv7/s5p-common/timer.c @@ -39,13 +39,33 @@ static inline struct s5p_timer *s5p_get_base_timer(void) return (struct s5p_timer *)samsung_get_base_timer(); } +/** + * Read the countdown timer. + * + * This operates at 1MHz and counts downwards. It will wrap about every + * hour (2^32 microseconds). + * + * @return current value of timer + */ +static unsigned long timer_get_us_down(void) +{ + struct s5p_timer *const timer = s5p_get_base_timer(); + + return readl(&timer->tcnto4); +} + int timer_init(void) { /* PWM Timer 4 */ - pwm_init(4, MUX_DIV_2, 0); - pwm_config(4, 0, 0); + pwm_init(4, MUX_DIV_4, 0); + pwm_config(4, 100000, 100000); pwm_enable(4); + /* Use this as the current monotonic time in us */ + gd->arch.timer_reset_value = 0; + + /* Use this as the last timer value we saw */ + gd->arch.lastinc = timer_get_us_down(); reset_timer_masked(); return 0; @@ -56,81 +76,52 @@ int timer_init(void) */ unsigned long get_timer(unsigned long base) { - return get_timer_masked() - base; -} + ulong now = timer_get_us_down(); + + /* + * Increment the time by the amount elapsed since the last read. + * The timer may have wrapped around, but it makes no difference to + * our arithmetic here. + */ + gd->arch.timer_reset_value += gd->arch.lastinc - now; + gd->arch.lastinc = now; -/* delay x useconds */ -void __udelay(unsigned long usec) -{ - struct s5p_timer *const timer = s5p_get_base_timer(); - unsigned long tmo, tmp, count_value; - - count_value = readl(&timer->tcntb4); - - if (usec >= 1000) { - /* - * if "big" number, spread normalization - * to seconds - * 1. start to normalize for usec to ticks per sec - * 2. find number of "ticks" to wait to achieve target - * 3. finish normalize. - */ - tmo = usec / 1000; - tmo *= (CONFIG_SYS_HZ * count_value); - tmo /= 1000; - } else { - /* else small number, don't kill it prior to HZ multiply */ - tmo = usec * CONFIG_SYS_HZ * count_value; - tmo /= (1000 * 1000); - } - - /* get current timestamp */ - tmp = get_current_tick(); - - /* if setting this fordward will roll time stamp */ - /* reset "advancing" timestamp to 0, set lastinc value */ - /* else, set advancing stamp wake up time */ - if ((tmo + tmp + 1) < tmp) - reset_timer_masked(); - else - tmo += tmp; - - /* loop till event */ - while (get_current_tick() < tmo) - ; /* nop */ + /* Divide by 1000 to convert from us to ms */ + return gd->arch.timer_reset_value / 1000 - base; } -void reset_timer_masked(void) +unsigned long timer_get_us(void) { - struct s5p_timer *const timer = s5p_get_base_timer(); + static unsigned long base_time_us; - /* reset time */ - gd->arch.lastinc = readl(&timer->tcnto4); - gd->arch.tbl = 0; + struct s5p_timer *const timer = + (struct s5p_timer *)samsung_get_base_timer(); + unsigned long now_downward_us = readl(&timer->tcnto4); + + if (!base_time_us) + base_time_us = now_downward_us; + + /* Note that this timer counts downward. */ + return base_time_us - now_downward_us; } -unsigned long get_timer_masked(void) +/* delay x useconds */ +void __udelay(unsigned long usec) { - struct s5p_timer *const timer = s5p_get_base_timer(); - unsigned long count_value = readl(&timer->tcntb4); + unsigned long count_value; - return get_current_tick() / count_value; + count_value = timer_get_us_down(); + while ((int)(count_value - timer_get_us_down()) < (int)usec) + ; } -unsigned long get_current_tick(void) +void reset_timer_masked(void) { struct s5p_timer *const timer = s5p_get_base_timer(); - unsigned long now = readl(&timer->tcnto4); - unsigned long count_value = readl(&timer->tcntb4); - - if (gd->arch.lastinc >= now) - gd->arch.tbl += gd->arch.lastinc - now; - else - gd->arch.tbl += gd->arch.lastinc + count_value - now; - - gd->arch.lastinc = now; - return gd->arch.tbl; + /* reset time */ + gd->arch.lastinc = readl(&timer->tcnto4); + gd->arch.tbl = 0; } /* diff --git a/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds b/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds index 79cc93c..15f8c01 100644 --- a/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds +++ b/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds @@ -27,7 +27,7 @@ SECTIONS . = ALIGN(4); .text : { - arch/arm/cpu/armv7/start.o (.text) + arch/arm/cpu/armv7/start.o (.text*) *(.text*) } >.sdram diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 36a4c3c..64008ba 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -81,7 +81,11 @@ _end_vect: .globl _TEXT_BASE _TEXT_BASE: +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) + .word CONFIG_SPL_TEXT_BASE +#else .word CONFIG_SYS_TEXT_BASE +#endif /* * These are defined in the board-specific linker script. @@ -90,9 +94,9 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start -.global _image_copy_end_ofs +.globl _image_copy_end_ofs _image_copy_end_ofs: - .word __image_copy_end - _start + .word __image_copy_end - _start .globl _bss_end_ofs _bss_end_ofs: @@ -161,28 +165,23 @@ reset: #ifndef CONFIG_SPL_BUILD /* - * void relocate_code (addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. + * void relocate_code(addr_moni) * + * This function relocates the monitor code. */ ENTRY(relocate_code) - mov r4, r0 /* save addr_sp */ - mov r5, r1 /* save addr of gd */ - mov r6, r2 /* save addr of destination */ + mov r6, r0 /* save addr of destination */ adr r0, _start - cmp r0, r6 - moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ + subs r9, r6, r0 /* r9 <- relocation offset */ beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */ copy_loop: - ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r1!, {r9-r10} /* copy to target address [r1] */ + ldmia r0!, {r10-r11} /* copy from source address [r0] */ + stmia r1!, {r10-r11} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -190,7 +189,6 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S index b725964..69ef8aa 100644 --- a/arch/arm/cpu/ixp/start.S +++ b/arch/arm/cpu/ixp/start.S @@ -98,7 +98,11 @@ _fiq: .word fiq .globl _TEXT_BASE _TEXT_BASE: +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) + .word CONFIG_SPL_TEXT_BASE +#else .word CONFIG_SYS_TEXT_BASE +#endif /* * These are defined in the board-specific linker script. @@ -110,6 +114,10 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start +.globl _image_copy_end_ofs +_image_copy_end_ofs: + .word __image_copy_end - _start + .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -250,29 +258,24 @@ reset: /*------------------------------------------------------------------------------*/ /* - * void relocate_code (addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. + * void relocate_code(addr_moni) * + * This function relocates the monitor code. */ .globl relocate_code relocate_code: - mov r4, r0 /* save addr_sp */ - mov r5, r1 /* save addr of gd */ - mov r6, r2 /* save addr of destination */ + mov r6, r0 /* save addr of destination */ adr r0, _start - cmp r0, r6 - moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ + subs r9, r6, r0 /* r9 <- relocation offset */ beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _bss_start_ofs + ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */ copy_loop: - ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r1!, {r9-r10} /* copy to target address [r1] */ + ldmia r0!, {r10-r11} /* copy from source address [r0] */ + stmia r1!, {r10-r11} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -281,7 +284,6 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ diff --git a/arch/arm/cpu/ixp/u-boot.lds b/arch/arm/cpu/ixp/u-boot.lds index 8345b55..388a67f 100644 --- a/arch/arm/cpu/ixp/u-boot.lds +++ b/arch/arm/cpu/ixp/u-boot.lds @@ -54,6 +54,8 @@ SECTIONS . = ALIGN(4); + __image_copy_end = .; + .rel.dyn : { __rel_dyn_start = .; *(.rel*) diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index 456a783..3e07c7c 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -102,7 +102,7 @@ _end_vect: .globl _TEXT_BASE _TEXT_BASE: -#ifdef CONFIG_SPL_BUILD +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) .word CONFIG_SPL_TEXT_BASE #else .word CONFIG_SYS_TEXT_BASE @@ -118,6 +118,10 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start +.globl _image_copy_end_ofs +_image_copy_end_ofs: + .word __image_copy_end - _start + .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -169,17 +173,13 @@ reset: /*------------------------------------------------------------------------------*/ #ifndef CONFIG_SPL_BUILD /* - * void relocate_code (addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. + * void relocate_code(addr_moni) * + * This function relocates the monitor code. */ .globl relocate_code relocate_code: - mov r4, r0 /* save addr_sp */ - mov r5, r1 /* save addr of gd */ - mov r6, r2 /* save addr of destination */ + mov r6, r0 /* save addr of destination */ /* Disable the Dcache RAM lock for stack now */ #ifdef CONFIG_CPU_PXA25X @@ -189,16 +189,15 @@ relocate_code: #endif adr r0, _start - cmp r0, r6 - moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ + subs r9, r6, r0 /* r9 <- relocation offset */ beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _bss_start_ofs + ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */ copy_loop: - ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r1!, {r9-r10} /* copy to target address [r1] */ + ldmia r0!, {r10-r11} /* copy from source address [r0] */ + stmia r1!, {r10-r11} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -207,7 +206,6 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S index c096177..7361aa2 100644 --- a/arch/arm/cpu/s3c44b0/start.S +++ b/arch/arm/cpu/s3c44b0/start.S @@ -64,7 +64,11 @@ _start: b reset .globl _TEXT_BASE _TEXT_BASE: +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) + .word CONFIG_SPL_TEXT_BASE +#else .word CONFIG_SYS_TEXT_BASE +#endif /* * These are defined in the board-specific linker script. @@ -76,6 +80,10 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start +.globl _image_copy_end_ofs +_image_copy_end_ofs: + .word __image_copy_end - _start + .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -133,29 +141,24 @@ reset: /*------------------------------------------------------------------------------*/ /* - * void relocate_code (addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. + * void relocate_code(addr_moni) * + * This function relocates the monitor code. */ .globl relocate_code relocate_code: - mov r4, r0 /* save addr_sp */ - mov r5, r1 /* save addr of gd */ - mov r6, r2 /* save addr of destination */ + mov r6, r0 /* save addr of destination */ adr r0, _start - cmp r0, r6 - moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ + subs r9, r6, r0 /* r9 <- relocation offset */ beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _bss_start_ofs + ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */ copy_loop: - ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r1!, {r9-r10} /* copy to target address [r1] */ + ldmia r0!, {r10-r11} /* copy from source address [r0] */ + stmia r1!, {r10-r11} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -164,7 +167,6 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S index 4bf6f5f..8a2eafd 100644 --- a/arch/arm/cpu/sa1100/start.S +++ b/arch/arm/cpu/sa1100/start.S @@ -74,7 +74,11 @@ _fiq: .word fiq .globl _TEXT_BASE _TEXT_BASE: +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) + .word CONFIG_SPL_TEXT_BASE +#else .word CONFIG_SYS_TEXT_BASE +#endif /* * These are defined in the board-specific linker script. @@ -86,6 +90,10 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start +.globl _image_copy_end_ofs +_image_copy_end_ofs: + .word __image_copy_end - _start + .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -137,29 +145,24 @@ reset: /*------------------------------------------------------------------------------*/ /* - * void relocate_code (addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. + * void relocate_code(addr_moni) * + * This function relocates the monitor code. */ .globl relocate_code relocate_code: - mov r4, r0 /* save addr_sp */ - mov r5, r1 /* save addr of gd */ - mov r6, r2 /* save addr of destination */ + mov r6, r0 /* save addr of destination */ adr r0, _start - cmp r0, r6 - moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ + subs r9, r6, r0 /* r9 <- relocation offset */ beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _bss_start_ofs + ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */ copy_loop: - ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r1!, {r9-r10} /* copy to target address [r1] */ + ldmia r0!, {r10-r11} /* copy from source address [r0] */ + stmia r1!, {r10-r11} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -168,7 +171,6 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi index 61d35a8..df4b231 100644 --- a/arch/arm/dts/exynos5250.dtsi +++ b/arch/arm/dts/exynos5250.dtsi @@ -156,4 +156,17 @@ reg = <0x10060000 0x10000>; }; + fimd@14400000 { + compatible = "samsung,exynos-fimd"; + reg = <0x14400000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + dp@145b0000 { + compatible = "samsung,exynos5-dp"; + reg = <0x145b0000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; }; diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile index 6309fcd..44b6822 100644 --- a/arch/arm/imx-common/Makefile +++ b/arch/arm/imx-common/Makefile @@ -32,6 +32,7 @@ COBJS-y = iomux-v3.o timer.o cpu.o speed.o COBJS-$(CONFIG_I2C_MXC) += i2c-mxv7.o endif COBJS-$(CONFIG_CMD_BMODE) += cmd_bmode.o +COBJS-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o COBJS := $(sort $(COBJS-y)) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) @@ -54,6 +55,23 @@ $(OBJTREE)/SPL: $(OBJTREE)/spl/u-boot-spl.bin $(OBJTREE)/$(patsubst "%",%,$(CONF $(OBJTREE)/tools/mkimage -n $(filter-out %.bin,$^) -T imximage \ -e $(CONFIG_SPL_TEXT_BASE) -d $< $@ +$(OBJTREE)/u-boot-with-spl.imx: $(OBJTREE)/SPL $(OBJTREE)/u-boot.bin + $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \ + -I binary -O binary $< $(OBJTREE)/spl/u-boot-spl-pad.imx + cat $(OBJTREE)/spl/u-boot-spl-pad.imx $(OBJTREE)/u-boot.bin > $@ + rm $(OBJTREE)/spl/u-boot-spl-pad.imx + +$(OBJTREE)/u-boot-with-nand-spl.imx: $(OBJTREE)/SPL $(OBJTREE)/u-boot.bin + (echo -ne '\x00\x00\x00\x00\x46\x43\x42\x20\x01' && \ + dd bs=1015 count=1 if=/dev/zero 2>/dev/null) | \ + cat - $< > $(OBJTREE)/spl/u-boot-nand-spl.imx + $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \ + -I binary -O binary $(OBJTREE)/spl/u-boot-nand-spl.imx \ + $(OBJTREE)/spl/u-boot-nand-spl-pad.imx + rm $(OBJTREE)/spl/u-boot-nand-spl.imx + cat $(OBJTREE)/spl/u-boot-nand-spl-pad.imx $(OBJTREE)/u-boot.bin > $@ + rm $(OBJTREE)/spl/u-boot-nand-spl-pad.imx + ######################################################################### diff --git a/arch/arm/cpu/arm1176/s3c64xx/reset.S b/arch/arm/imx-common/cmd_hdmidet.c index eae572e..794bf50 100644 --- a/arch/arm/cpu/arm1176/s3c64xx/reset.S +++ b/arch/arm/imx-common/cmd_hdmidet.c @@ -1,6 +1,5 @@ /* - * Copyright (c) 2009 Samsung Electronics. - * Minkyu Kang <mk7.kang@samsung.com> + * Copyright (C) 2012 Boundary Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -12,7 +11,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -20,15 +19,19 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ +#include <common.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/mxc_hdmi.h> +#include <asm/io.h> -#include <asm/arch/s3c6400.h> +static int do_hdmidet(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR; + u8 reg = readb(&hdmi->phy_stat0) & HDMI_PHY_HPD; + return (reg&HDMI_PHY_HPD) ? 0 : 1; +} -.globl reset_cpu -reset_cpu: - ldr r1, =ELFIN_CLOCK_POWER_BASE - ldr r2, [r1, #SYS_ID_OFFSET] - ldr r3, =0xffff - and r2, r3, r2, lsr #12 - str r2, [r1, #SW_RST_OFFSET] -_loop_forever: - b _loop_forever +U_BOOT_CMD(hdmidet, 1, 1, do_hdmidet, + "detect HDMI monitor", + "" +); diff --git a/arch/arm/imx-common/timer.c b/arch/arm/imx-common/timer.c index ab37d64..1dbc413 100644 --- a/arch/arm/imx-common/timer.c +++ b/arch/arm/imx-common/timer.c @@ -48,9 +48,6 @@ static struct mxc_gpt *cur_gpt = (struct mxc_gpt *)GPT1_BASE_ADDR; DECLARE_GLOBAL_DATA_PTR; -#define timestamp (gd->arch.tbl) -#define lastinc (gd->arch.lastinc) - static inline unsigned long long tick_to_time(unsigned long long tick) { tick *= CONFIG_SYS_HZ; @@ -70,7 +67,6 @@ static inline unsigned long long us_to_tick(unsigned long long usec) int timer_init(void) { int i; - ulong val; /* setup GP Timer 1 */ __raw_writel(GPTCR_SWR, &cur_gpt->control); @@ -85,9 +81,8 @@ int timer_init(void) i = __raw_readl(&cur_gpt->control); __raw_writel(i | GPTCR_CLKSOURCE_32 | GPTCR_TEN, &cur_gpt->control); - val = __raw_readl(&cur_gpt->counter); - lastinc = val / (MXC_CLK32 / CONFIG_SYS_HZ); - timestamp = 0; + gd->arch.tbl = __raw_readl(&cur_gpt->counter); + gd->arch.tbu = 0; return 0; } @@ -96,18 +91,11 @@ unsigned long long get_ticks(void) { ulong now = __raw_readl(&cur_gpt->counter); /* current tick value */ - if (now >= lastinc) { - /* - * normal mode (non roll) - * move stamp forward with absolut diff ticks - */ - timestamp += (now - lastinc); - } else { - /* we have rollover of incrementer */ - timestamp += (0xFFFFFFFF - lastinc) + now; - } - lastinc = now; - return timestamp; + /* increment tbu if tbl has rolled over */ + if (now < gd->arch.tbl) + gd->arch.tbu++; + gd->arch.tbl = now; + return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl; } ulong get_timer_masked(void) diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h index 260cc34..914df01 100644 --- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h +++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h @@ -84,19 +84,19 @@ #define MT41J256M8HX15E_IOCTRL_VALUE 0x18B /* Micron MT41K256M16HA-125E */ -#define MT41K256M16HA125E_EMIF_READ_LATENCY 0x100006 -#define MT41K256M16HA125E_EMIF_TIM1 0x0888A39B -#define MT41K256M16HA125E_EMIF_TIM2 0x26517FDA -#define MT41K256M16HA125E_EMIF_TIM3 0x501F84EF -#define MT41K256M16HA125E_EMIF_SDCFG 0x61C04BB2 -#define MT41K256M16HA125E_EMIF_SDREF 0x0000093B +#define MT41K256M16HA125E_EMIF_READ_LATENCY 0x100007 +#define MT41K256M16HA125E_EMIF_TIM1 0x0AAAD4DB +#define MT41K256M16HA125E_EMIF_TIM2 0x26437FDA +#define MT41K256M16HA125E_EMIF_TIM3 0x501F83FF +#define MT41K256M16HA125E_EMIF_SDCFG 0x61C052B2 +#define MT41K256M16HA125E_EMIF_SDREF 0xC30 #define MT41K256M16HA125E_ZQ_CFG 0x50074BE4 #define MT41K256M16HA125E_DLL_LOCK_DIFF 0x1 -#define MT41K256M16HA125E_RATIO 0x40 +#define MT41K256M16HA125E_RATIO 0x80 #define MT41K256M16HA125E_INVERT_CLKOUT 0x0 -#define MT41K256M16HA125E_RD_DQS 0x3C -#define MT41K256M16HA125E_WR_DQS 0x45 -#define MT41K256M16HA125E_PHY_WR_DATA 0x7F +#define MT41K256M16HA125E_RD_DQS 0x3A +#define MT41K256M16HA125E_WR_DQS 0x42 +#define MT41K256M16HA125E_PHY_WR_DATA 0x7E #define MT41K256M16HA125E_PHY_FIFO_WE 0x9B #define MT41K256M16HA125E_IOCTRL_VALUE 0x18B diff --git a/arch/arm/include/asm/arch-am33xx/omap_gpmc.h b/arch/arm/include/asm/arch-am33xx/omap_gpmc.h index 572f9d0..d03f1db 100644 --- a/arch/arm/include/asm/arch-am33xx/omap_gpmc.h +++ b/arch/arm/include/asm/arch-am33xx/omap_gpmc.h @@ -23,63 +23,7 @@ #ifndef __ASM_ARCH_OMAP_GPMC_H #define __ASM_ARCH_OMAP_GPMC_H -#define GPMC_BUF_EMPTY 0 -#define GPMC_BUF_FULL 1 - -#define ECCCLEAR (0x1 << 8) -#define ECCRESULTREG1 (0x1 << 0) -#define ECCSIZE512BYTE 0xFF -#define ECCSIZE1 (ECCSIZE512BYTE << 22) -#define ECCSIZE0 (ECCSIZE512BYTE << 12) -#define ECCSIZE0SEL (0x000 << 0) - -/* Generic ECC Layouts */ -/* Large Page x8 NAND device Layout */ -#ifdef GPMC_NAND_ECC_LP_x8_LAYOUT -#define GPMC_NAND_HW_ECC_LAYOUT {\ - .eccbytes = 12,\ - .eccpos = {1, 2, 3, 4, 5, 6, 7, 8,\ - 9, 10, 11, 12},\ - .oobfree = {\ - {.offset = 13,\ - .length = 51 } } \ -} -#endif - -/* Large Page x16 NAND device Layout */ -#ifdef GPMC_NAND_ECC_LP_x16_LAYOUT -#define GPMC_NAND_HW_ECC_LAYOUT {\ - .eccbytes = 12,\ - .eccpos = {2, 3, 4, 5, 6, 7, 8, 9,\ - 10, 11, 12, 13},\ - .oobfree = {\ - {.offset = 14,\ - .length = 50 } } \ -} -#endif - -/* Small Page x8 NAND device Layout */ -#ifdef GPMC_NAND_ECC_SP_x8_LAYOUT -#define GPMC_NAND_HW_ECC_LAYOUT {\ - .eccbytes = 3,\ - .eccpos = {1, 2, 3},\ - .oobfree = {\ - {.offset = 4,\ - .length = 12 } } \ -} -#endif - -/* Small Page x16 NAND device Layout */ -#ifdef GPMC_NAND_ECC_SP_x16_LAYOUT -#define GPMC_NAND_HW_ECC_LAYOUT {\ - .eccbytes = 3,\ - .eccpos = {2, 3, 4},\ - .oobfree = {\ - {.offset = 5,\ - .length = 11 } } \ -} -#endif - +/* These GPMC_NAND_HW_BCHx_ECC_LAYOUT defines are based on AM33xx ELM */ #define GPMC_NAND_HW_BCH4_ECC_LAYOUT {\ .eccbytes = 32,\ .eccpos = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,\ diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h index f60b086..4c23b27 100644 --- a/arch/arm/include/asm/arch-am33xx/spl.h +++ b/arch/arm/include/asm/arch-am33xx/spl.h @@ -37,4 +37,12 @@ #define BOOT_DEVICE_USBETH 68 #define BOOT_DEVICE_CPGMAC 70 #define BOOT_DEVICE_MMC2_2 0xFF + +#ifdef CONFIG_AM33XX +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2 +#elif defined(CONFIG_TI814X) +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC2 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC1 +#endif #endif diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index 0910a94..c913b5f 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -39,5 +39,5 @@ struct gpmc_cs; void gpmc_init(void); void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, u32 size); -void omap_nand_switch_ecc(int); +void omap_nand_switch_ecc(uint32_t, uint32_t); #endif diff --git a/arch/arm/include/asm/arch-bcm2835/timer.h b/arch/arm/include/asm/arch-bcm2835/timer.h index 30c70e0..c2001b6 100644 --- a/arch/arm/include/asm/arch-bcm2835/timer.h +++ b/arch/arm/include/asm/arch-bcm2835/timer.h @@ -34,4 +34,6 @@ struct bcm2835_timer_regs { #define BCM2835_TIMER_CS_M1 (1 << 1) #define BCM2835_TIMER_CS_M0 (1 << 0) +extern ulong get_timer_us(ulong base); + #endif diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h index 1935b0b..73f8063 100644 --- a/arch/arm/include/asm/arch-exynos/clk.h +++ b/arch/arm/include/asm/arch-exynos/clk.h @@ -29,6 +29,12 @@ #define VPLL 4 #define BPLL 5 +enum pll_src_bit { + EXYNOS_SRC_MPLL = 6, + EXYNOS_SRC_EPLL, + EXYNOS_SRC_VPLL, +}; + unsigned long get_pll_clk(int pllreg); unsigned long get_arm_clk(void); unsigned long get_i2c_clk(void); @@ -44,4 +50,13 @@ int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq); int set_epll_clk(unsigned long rate); int set_spi_clk(int periph_id, unsigned int rate); +/** + * get the clk frequency of the required peripheral + * + * @param peripheral Peripheral id + * + * @return frequency of the peripheral clk + */ +unsigned long clock_get_periph_rate(int peripheral); + #endif diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h index eb34422..f76e489 100644 --- a/arch/arm/include/asm/arch-exynos/cpu.h +++ b/arch/arm/include/asm/arch-exynos/cpu.h @@ -62,6 +62,7 @@ #define EXYNOS4_GPIO_PART4_BASE DEVICE_NOT_AVAILABLE #define EXYNOS4_DP_BASE DEVICE_NOT_AVAILABLE #define EXYNOS4_SPI_ISP_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4_ACE_SFR_BASE DEVICE_NOT_AVAILABLE /* EXYNOS4X12 */ #define EXYNOS4X12_GPIO_PART3_BASE 0x03860000 @@ -92,9 +93,10 @@ #define EXYNOS4X12_ADC_BASE DEVICE_NOT_AVAILABLE #define EXYNOS4X12_DP_BASE DEVICE_NOT_AVAILABLE #define EXYNOS4X12_MODEM_BASE DEVICE_NOT_AVAILABLE -#define EXYNOS4X12_I2S_BASE DEVICE_NOT_AVAILABLE -#define EXYNOS4X12_SPI_BASE DEVICE_NOT_AVAILABLE -#define EXYNOS4X12_SPI_ISP_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4X12_I2S_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4X12_SPI_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4X12_SPI_ISP_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4X12_ACE_SFR_BASE DEVICE_NOT_AVAILABLE /* EXYNOS5 Common*/ #define EXYNOS5_I2C_SPACING 0x10000 @@ -106,6 +108,7 @@ #define EXYNOS5_SWRESET 0x10040400 #define EXYNOS5_SYSREG_BASE 0x10050000 #define EXYNOS5_WATCHDOG_BASE 0x101D0000 +#define EXYNOS5_ACE_SFR_BASE 0x10830000 #define EXYNOS5_DMC_PHY0_BASE 0x10C00000 #define EXYNOS5_DMC_PHY1_BASE 0x10C10000 #define EXYNOS5_GPIO_PART3_BASE 0x10D10000 @@ -205,6 +208,7 @@ static inline unsigned int samsung_get_base_##device(void) \ SAMSUNG_BASE(adc, ADC_BASE) SAMSUNG_BASE(clock, CLOCK_BASE) +SAMSUNG_BASE(ace_sfr, ACE_SFR_BASE) SAMSUNG_BASE(dp, DP_BASE) SAMSUNG_BASE(sysreg, SYSREG_BASE) SAMSUNG_BASE(fimd, FIMD_BASE) diff --git a/arch/arm/include/asm/arch-exynos/dp_info.h b/arch/arm/include/asm/arch-exynos/dp_info.h index 102b709..ff16361 100644 --- a/arch/arm/include/asm/arch-exynos/dp_info.h +++ b/arch/arm/include/asm/arch-exynos/dp_info.h @@ -199,7 +199,6 @@ enum { struct exynos_dp_platform_data { struct edp_device_info *edp_dev_info; - void (*phy_enable)(unsigned int); }; #ifdef CONFIG_EXYNOS_DP diff --git a/arch/arm/include/asm/arch-exynos/periph.h b/arch/arm/include/asm/arch-exynos/periph.h index 89bcdfc..e5aed4b 100644 --- a/arch/arm/include/asm/arch-exynos/periph.h +++ b/arch/arm/include/asm/arch-exynos/periph.h @@ -61,6 +61,11 @@ enum periph_id { PERIPH_ID_SPI3, PERIPH_ID_SPI4, PERIPH_ID_SDMMC4, + PERIPH_ID_PWM0, + PERIPH_ID_PWM1, + PERIPH_ID_PWM2, + PERIPH_ID_PWM3, + PERIPH_ID_PWM4, PERIPH_ID_COUNT, PERIPH_ID_NONE = -1, diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h index 9494e41..9846f1b 100644 --- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h @@ -50,6 +50,8 @@ #define NO_MUX_I 0 #define NO_PAD_I 0 enum { + MX6_PAD_CSI0_DAT10__UART1_TXD = IOMUX_PAD(0x0360, 0x004C, 3, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT11__UART1_RXD = IOMUX_PAD(0x0364, 0x0050, 3, 0x08FC, 1, 0), MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x03B0, 0x009C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15 = IOMUX_PAD(0x03B4, 0x00A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x03B8, 0x00A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), @@ -90,6 +92,7 @@ enum { MX6_PAD_EIM_D27__UART2_RXD = IOMUX_PAD(0x0540, 0x0170, 4, 0x0904, 1, 0), MX6_PAD_EIM_D28__I2C1_SDA = IOMUX_PAD(0x0544, 0x0174, 1 | IOMUX_CONFIG_SION, 0x086C, 1, 0), MX6_PAD_EIM_D28__GPIO_3_28 = IOMUX_PAD(0x0544, 0x0174, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D29__GPIO_3_29 = IOMUX_PAD(0x0548, 0x0178, 5, 0x0000, 0, 0), MX6_PAD_ENET_MDC__ENET_MDC = IOMUX_PAD(0x05B8, 0x01E8, 1, 0x0000, 0, 0), MX6_PAD_ENET_MDIO__ENET_MDIO = IOMUX_PAD(0x05BC, 0x01EC, 1, 0x0810, 0, 0), MX6_PAD_ENET_REF_CLK__ENET_TX_CLK = IOMUX_PAD(0x05C0, 0x01F0, 1, 0x0000, 0, 0), diff --git a/arch/arm/include/asm/arch-omap24xx/omap2420.h b/arch/arm/include/asm/arch-omap24xx/omap2420.h index d8d5647..5724f5d 100644 --- a/arch/arm/include/asm/arch-omap24xx/omap2420.h +++ b/arch/arm/include/asm/arch-omap24xx/omap2420.h @@ -212,9 +212,9 @@ # define H4_CS1_BASE 0x04000000 /* debug board */ # define H4_CS2_BASE 0x0A000000 /* wifi board */ #else -# define H4_CS0_BASE 0x04000000 /* flash (64 Meg aligned) */ -# define H4_CS1_BASE 0x08000000 /* debug board */ -# define H4_CS2_BASE 0x0A000000 /* wifi board */ +# define H4_CS0_BASE 0x08000000 /* flash (64 Meg aligned) */ +# define H4_CS1_BASE 0x04000000 /* debug board */ +# define H4_CS2_BASE 0x0C000000 /* wifi board */ #endif /* base address for indirect vectors (internal boot mode) */ diff --git a/arch/arm/include/asm/arch-omap3/cpu.h b/arch/arm/include/asm/arch-omap3/cpu.h index 5683e16..c601873 100644 --- a/arch/arm/include/asm/arch-omap3/cpu.h +++ b/arch/arm/include/asm/arch-omap3/cpu.h @@ -109,6 +109,10 @@ struct gpmc_cs { u8 res[8]; /* blow up to 0x30 byte */ }; +struct bch_res_0_3 { + u32 bch_result_x[4]; +}; + struct gpmc { u8 res1[0x10]; u32 sysconfig; /* 0x10 */ @@ -135,6 +139,8 @@ struct gpmc { u32 ecc7_result; /* 0x218 */ u32 ecc8_result; /* 0x21C */ u32 ecc9_result; /* 0x220 */ + u8 res7[0x1C]; /* fill up to 0x240 */ + struct bch_res_0_3 bch_result_0_3[7]; /* 0x240 */ }; /* Used for board specific gpmc initialization */ diff --git a/arch/arm/include/asm/arch-omap3/omap_gpmc.h b/arch/arm/include/asm/arch-omap3/omap_gpmc.h index 800e4ee..6441281 100644 --- a/arch/arm/include/asm/arch-omap3/omap_gpmc.h +++ b/arch/arm/include/asm/arch-omap3/omap_gpmc.h @@ -23,62 +23,22 @@ #ifndef __ASM_ARCH_OMAP_GPMC_H #define __ASM_ARCH_OMAP_GPMC_H -#define GPMC_BUF_EMPTY 0 -#define GPMC_BUF_FULL 1 - -#define ECCCLEAR (0x1 << 8) -#define ECCRESULTREG1 (0x1 << 0) -#define ECCSIZE512BYTE 0xFF -#define ECCSIZE1 (ECCSIZE512BYTE << 22) -#define ECCSIZE0 (ECCSIZE512BYTE << 12) -#define ECCSIZE0SEL (0x000 << 0) - -/* Generic ECC Layouts */ -/* Large Page x8 NAND device Layout */ -#ifdef GPMC_NAND_ECC_LP_x8_LAYOUT -#define GPMC_NAND_HW_ECC_LAYOUT {\ - .eccbytes = 12,\ - .eccpos = {1, 2, 3, 4, 5, 6, 7, 8,\ - 9, 10, 11, 12},\ - .oobfree = {\ - {.offset = 13,\ - .length = 51 } } \ -} -#endif - -/* Large Page x16 NAND device Layout */ -#ifdef GPMC_NAND_ECC_LP_x16_LAYOUT -#define GPMC_NAND_HW_ECC_LAYOUT {\ - .eccbytes = 12,\ - .eccpos = {2, 3, 4, 5, 6, 7, 8, 9,\ - 10, 11, 12, 13},\ - .oobfree = {\ - {.offset = 14,\ - .length = 50 } } \ -} -#endif - -/* Small Page x8 NAND device Layout */ -#ifdef GPMC_NAND_ECC_SP_x8_LAYOUT -#define GPMC_NAND_HW_ECC_LAYOUT {\ - .eccbytes = 3,\ - .eccpos = {1, 2, 3},\ - .oobfree = {\ - {.offset = 4,\ - .length = 12 } } \ -} -#endif - -/* Small Page x16 NAND device Layout */ -#ifdef GPMC_NAND_ECC_SP_x16_LAYOUT -#define GPMC_NAND_HW_ECC_LAYOUT {\ - .eccbytes = 3,\ - .eccpos = {2, 3, 4},\ +/* + * These GPMC_NAND_HW_BCHx_ECC_LAYOUT defines using the BCH library. + * The OOB layout was first defined by linx kernel in commit + * 0e618ef0a6a33cf7ef96c2c824402088dd8ef48c, we have to reuse it here cause + * we want to be compatible. + */ +#define GPMC_NAND_HW_BCH8_ECC_LAYOUT {\ + .eccbytes = 56,\ + .eccpos = {12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22,\ + 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36,\ + 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50,\ + 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63},\ .oobfree = {\ - {.offset = 5,\ - .length = 11 } } \ + {.offset = 2,\ + .length = 10 } } \ } -#endif /* GPMC CS configuration for an SMSC LAN9221 ethernet controller */ #define NET_LAN9221_GPMC_CONFIG1 0x00001000 diff --git a/arch/arm/include/asm/arch-omap3/spl.h b/arch/arm/include/asm/arch-omap3/spl.h index dec4dac..84e6d7b 100644 --- a/arch/arm/include/asm/arch-omap3/spl.h +++ b/arch/arm/include/asm/arch-omap3/spl.h @@ -31,4 +31,7 @@ #define BOOT_DEVICE_MMC1 6 #define BOOT_DEVICE_XIPWAIT 7 #define BOOT_DEVICE_MMC2_2 0xFF + +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC2 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC1 #endif diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h index d60f2ad..dae1312 100644 --- a/arch/arm/include/asm/arch-omap3/sys_proto.h +++ b/arch/arm/include/asm/arch-omap3/sys_proto.h @@ -78,7 +78,7 @@ void sr32(void *, u32, u32, u32); u32 wait_on_value(u32, u32, void *, u32); void sdelay(unsigned long); void make_cs1_contiguous(void); -void omap_nand_switch_ecc(int); +void omap_nand_switch_ecc(uint32_t, uint32_t); void power_init_r(void); void dieid_num_r(void); void do_omap3_emu_romcode_call(u32 service_id, u32 parameters); diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h index 5f321fe..ad984da 100644 --- a/arch/arm/include/asm/arch-omap4/omap.h +++ b/arch/arm/include/asm/arch-omap4/omap.h @@ -147,7 +147,6 @@ struct s32ktimer { #define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START /* SRAM scratch space entries */ #define OMAP4_SRAM_SCRATCH_OMAP4_REV SRAM_SCRATCH_SPACE_ADDR -#define OMAP4_SRAM_SCRATCH_EMIF_SIZE (SRAM_SCRATCH_SPACE_ADDR + 0x4) #define OMAP4_SRAM_SCRATCH_EMIF_T_NUM (SRAM_SCRATCH_SPACE_ADDR + 0xC) #define OMAP4_SRAM_SCRATCH_EMIF_T_DEN (SRAM_SCRATCH_SPACE_ADDR + 0x10) #define OMAP_SRAM_SCRATCH_PRCM_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x14) diff --git a/arch/arm/include/asm/arch-omap4/spl.h b/arch/arm/include/asm/arch-omap4/spl.h index 4e094f9..f61627f 100644 --- a/arch/arm/include/asm/arch-omap4/spl.h +++ b/arch/arm/include/asm/arch-omap4/spl.h @@ -32,4 +32,6 @@ #define BOOT_DEVICE_MMC2 6 #define BOOT_DEVICE_MMC2_2 0xFF +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2 #endif diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index b632635..887fcaa 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -196,7 +196,6 @@ struct s32ktimer { * SRAM scratch space entries */ #define OMAP5_SRAM_SCRATCH_OMAP5_REV SRAM_SCRATCH_SPACE_ADDR -#define OMAP5_SRAM_SCRATCH_EMIF_SIZE (SRAM_SCRATCH_SPACE_ADDR + 0x4) #define OMAP5_SRAM_SCRATCH_EMIF_T_NUM (SRAM_SCRATCH_SPACE_ADDR + 0xC) #define OMAP5_SRAM_SCRATCH_EMIF_T_DEN (SRAM_SCRATCH_SPACE_ADDR + 0x10) #define OMAP_SRAM_SCRATCH_PRCM_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x14) diff --git a/arch/arm/include/asm/arch-omap5/spl.h b/arch/arm/include/asm/arch-omap5/spl.h index 323cd63..d4d353c 100644 --- a/arch/arm/include/asm/arch-omap5/spl.h +++ b/arch/arm/include/asm/arch-omap5/spl.h @@ -32,4 +32,6 @@ #define BOOT_DEVICE_MMC2 6 #define BOOT_DEVICE_MMC2_2 7 +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2_2 #endif diff --git a/arch/arm/include/asm/arch-s3c64xx/hardware.h b/arch/arm/include/asm/arch-s3c64xx/hardware.h deleted file mode 100644 index 84d24c9..0000000 --- a/arch/arm/include/asm/arch-s3c64xx/hardware.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Originates from Samsung's u-boot 1.1.6 port to S3C6400 / SMDK6400 - * - * (C) Copyright 2008 - * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _ARCH_HARDWARE_H_ -#define _ARCH_HARDWARE_H_ - -#include <asm/sizes.h> - -#ifndef __ASSEMBLY__ -#define UData(Data) ((unsigned long) (Data)) - -#define __REG(x) (*(vu_long *)(x)) -#define __REGl(x) (*(vu_long *)(x)) -#define __REGw(x) (*(vu_short *)(x)) -#define __REGb(x) (*(vu_char *)(x)) -#define __REG2(x, y) (*(vu_long *)((x) + (y))) -#else -#define UData(Data) (Data) - -#define __REG(x) (x) -#define __REGl(x) (x) -#define __REGw(x) (x) -#define __REGb(x) (x) -#define __REG2(x, y) ((x) + (y)) -#endif - -#define Fld(Size, Shft) (((Size) << 16) + (Shft)) - -#define FSize(Field) ((Field) >> 16) -#define FShft(Field) ((Field) & 0x0000FFFF) -#define FMsk(Field) (((UData (1) << FSize (Field)) - 1) << FShft (Field)) -#define FAlnMsk(Field) ((UData (1) << FSize (Field)) - 1) -#define F1stBit(Field) (UData (1) << FShft (Field)) - -#define FClrBit(Data, Bit) (Data = (Data & ~(Bit))) -#define FClrFld(Data, Field) (Data = (Data & ~FMsk(Field))) - -#define FInsrt(Value, Field) \ - (UData (Value) << FShft (Field)) - -#define FExtr(Data, Field) \ - ((UData (Data) >> FShft (Field)) & FAlnMsk (Field)) - -#endif /* _ARCH_HARDWARE_H_ */ diff --git a/arch/arm/include/asm/arch-s3c64xx/s3c6400.h b/arch/arm/include/asm/arch-s3c64xx/s3c6400.h deleted file mode 100644 index 10b3324..0000000 --- a/arch/arm/include/asm/arch-s3c64xx/s3c6400.h +++ /dev/null @@ -1,895 +0,0 @@ -/* - * (C) Copyright 2007 - * Byungjae Lee, Samsung Erectronics, bjlee@samsung.com. - * - only support for S3C6400 - * - * (C) Copyright 2008 - * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/************************************************ - * NAME : s3c6400.h - * - * Based on S3C6400 User's manual Rev 0.0 - ************************************************/ - -#ifndef __S3C6400_H__ -#define __S3C6400_H__ - -#define S3C64XX_UART_CHANNELS 3 -#define S3C64XX_SPI_CHANNELS 2 - -#include <asm/hardware.h> - -#define ELFIN_CLOCK_POWER_BASE 0x7e00f000 - -/* Clock & Power Controller for mDirac3*/ -#define APLL_LOCK_OFFSET 0x00 -#define MPLL_LOCK_OFFSET 0x04 -#define EPLL_LOCK_OFFSET 0x08 -#define APLL_CON_OFFSET 0x0C -#define MPLL_CON_OFFSET 0x10 -#define EPLL_CON0_OFFSET 0x14 -#define EPLL_CON1_OFFSET 0x18 -#define CLK_SRC_OFFSET 0x1C -#define CLK_DIV0_OFFSET 0x20 -#define CLK_DIV1_OFFSET 0x24 -#define CLK_DIV2_OFFSET 0x28 -#define CLK_OUT_OFFSET 0x2C -#define HCLK_GATE_OFFSET 0x30 -#define PCLK_GATE_OFFSET 0x34 -#define SCLK_GATE_OFFSET 0x38 -#define AHB_CON0_OFFSET 0x100 -#define AHB_CON1_OFFSET 0x104 -#define AHB_CON2_OFFSET 0x108 -#define SELECT_DMA_OFFSET 0x110 -#define SW_RST_OFFSET 0x114 -#define SYS_ID_OFFSET 0x118 -#define MEM_SYS_CFG_OFFSET 0x120 -#define QOS_OVERRIDE0_OFFSET 0x124 -#define QOS_OVERRIDE1_OFFSET 0x128 -#define MEM_CFG_STAT_OFFSET 0x12C -#define PWR_CFG_OFFSET 0x804 -#define EINT_MASK_OFFSET 0x808 -#define NOR_CFG_OFFSET 0x810 -#define STOP_CFG_OFFSET 0x814 -#define SLEEP_CFG_OFFSET 0x818 -#define OSC_FREQ_OFFSET 0x820 -#define OSC_STABLE_OFFSET 0x824 -#define PWR_STABLE_OFFSET 0x828 -#define FPC_STABLE_OFFSET 0x82C -#define MTC_STABLE_OFFSET 0x830 -#define OTHERS_OFFSET 0x900 -#define RST_STAT_OFFSET 0x904 -#define WAKEUP_STAT_OFFSET 0x908 -#define BLK_PWR_STAT_OFFSET 0x90C -#define INF_REG0_OFFSET 0xA00 -#define INF_REG1_OFFSET 0xA04 -#define INF_REG2_OFFSET 0xA08 -#define INF_REG3_OFFSET 0xA0C -#define INF_REG4_OFFSET 0xA10 -#define INF_REG5_OFFSET 0xA14 -#define INF_REG6_OFFSET 0xA18 -#define INF_REG7_OFFSET 0xA1C - -#define OSC_CNT_VAL_OFFSET 0x824 -#define PWR_CNT_VAL_OFFSET 0x828 -#define FPC_CNT_VAL_OFFSET 0x82C -#define MTC_CNT_VAL_OFFSET 0x830 - -#define APLL_LOCK_REG __REG(ELFIN_CLOCK_POWER_BASE + APLL_LOCK_OFFSET) -#define MPLL_LOCK_REG __REG(ELFIN_CLOCK_POWER_BASE + MPLL_LOCK_OFFSET) -#define EPLL_LOCK_REG __REG(ELFIN_CLOCK_POWER_BASE + EPLL_LOCK_OFFSET) -#define APLL_CON_REG __REG(ELFIN_CLOCK_POWER_BASE + APLL_CON_OFFSET) -#define MPLL_CON_REG __REG(ELFIN_CLOCK_POWER_BASE + MPLL_CON_OFFSET) -#define EPLL_CON0_REG __REG(ELFIN_CLOCK_POWER_BASE + EPLL_CON0_OFFSET) -#define EPLL_CON1_REG __REG(ELFIN_CLOCK_POWER_BASE + EPLL_CON1_OFFSET) -#define CLK_SRC_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_SRC_OFFSET) -#define CLK_DIV0_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_DIV0_OFFSET) -#define CLK_DIV1_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_DIV1_OFFSET) -#define CLK_DIV2_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_DIV2_OFFSET) -#define CLK_OUT_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_OUT_OFFSET) -#define HCLK_GATE_REG __REG(ELFIN_CLOCK_POWER_BASE + HCLK_GATE_OFFSET) -#define PCLK_GATE_REG __REG(ELFIN_CLOCK_POWER_BASE + PCLK_GATE_OFFSET) -#define SCLK_GATE_REG __REG(ELFIN_CLOCK_POWER_BASE + SCLK_GATE_OFFSET) -#define AHB_CON0_REG __REG(ELFIN_CLOCK_POWER_BASE + AHB_CON0_OFFSET) -#define AHB_CON1_REG __REG(ELFIN_CLOCK_POWER_BASE + AHB_CON1_OFFSET) -#define AHB_CON2_REG __REG(ELFIN_CLOCK_POWER_BASE + AHB_CON2_OFFSET) -#define SELECT_DMA_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - SELECT_DMA_OFFSET) -#define SW_RST_REG __REG(ELFIN_CLOCK_POWER_BASE + SW_RST_OFFSET) -#define SYS_ID_REG __REG(ELFIN_CLOCK_POWER_BASE + SYS_ID_OFFSET) -#define MEM_SYS_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - MEM_SYS_CFG_OFFSET) -#define QOS_OVERRIDE0_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - QOS_OVERRIDE0_OFFSET) -#define QOS_OVERRIDE1_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - QOS_OVERRIDE1_OFFSET) -#define MEM_CFG_STAT_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - MEM_CFG_STAT_OFFSET) -#define PWR_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + PWR_CFG_OFFSET) -#define EINT_MASK_REG __REG(ELFIN_CLOCK_POWER_BASE + EINT_MASK_OFFSET) -#define NOR_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + NOR_CFG_OFFSET) -#define STOP_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + STOP_CFG_OFFSET) -#define SLEEP_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + SLEEP_CFG_OFFSET) -#define OSC_FREQ_REG __REG(ELFIN_CLOCK_POWER_BASE + OSC_FREQ_OFFSET) -#define OSC_CNT_VAL_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - OSC_CNT_VAL_OFFSET) -#define PWR_CNT_VAL_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - PWR_CNT_VAL_OFFSET) -#define FPC_CNT_VAL_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - FPC_CNT_VAL_OFFSET) -#define MTC_CNT_VAL_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - MTC_CNT_VAL_OFFSET) -#define OTHERS_REG __REG(ELFIN_CLOCK_POWER_BASE + OTHERS_OFFSET) -#define RST_STAT_REG __REG(ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET) -#define WAKEUP_STAT_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - WAKEUP_STAT_OFFSET) -#define BLK_PWR_STAT_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - BLK_PWR_STAT_OFFSET) -#define INF_REG0_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET) -#define INF_REG1_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG1_OFFSET) -#define INF_REG2_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG2_OFFSET) -#define INF_REG3_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG3_OFFSET) -#define INF_REG4_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG4_OFFSET) -#define INF_REG5_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG5_OFFSET) -#define INF_REG6_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG6_OFFSET) -#define INF_REG7_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG7_OFFSET) - -#define APLL_LOCK (ELFIN_CLOCK_POWER_BASE + APLL_LOCK_OFFSET) -#define MPLL_LOCK (ELFIN_CLOCK_POWER_BASE + MPLL_LOCK_OFFSET) -#define EPLL_LOCK (ELFIN_CLOCK_POWER_BASE + EPLL_LOCK_OFFSET) -#define APLL_CON (ELFIN_CLOCK_POWER_BASE + APLL_CON_OFFSET) -#define MPLL_CON (ELFIN_CLOCK_POWER_BASE + MPLL_CON_OFFSET) -#define EPLL_CON0 (ELFIN_CLOCK_POWER_BASE + EPLL_CON0_OFFSET) -#define EPLL_CON1 (ELFIN_CLOCK_POWER_BASE + EPLL_CON1_OFFSET) -#define CLK_SRC (ELFIN_CLOCK_POWER_BASE + CLK_SRC_OFFSET) -#define CLK_DIV0 (ELFIN_CLOCK_POWER_BASE + CLK_DIV0_OFFSET) -#define CLK_DIV1 (ELFIN_CLOCK_POWER_BASE + CLK_DIV1_OFFSET) -#define CLK_DIV2 (ELFIN_CLOCK_POWER_BASE + CLK_DIV2_OFFSET) -#define CLK_OUT (ELFIN_CLOCK_POWER_BASE + CLK_OUT_OFFSET) -#define HCLK_GATE (ELFIN_CLOCK_POWER_BASE + HCLK_GATE_OFFSET) -#define PCLK_GATE (ELFIN_CLOCK_POWER_BASE + PCLK_GATE_OFFSET) -#define SCLK_GATE (ELFIN_CLOCK_POWER_BASE + SCLK_GATE_OFFSET) -#define AHB_CON0 (ELFIN_CLOCK_POWER_BASE + AHB_CON0_OFFSET) -#define AHB_CON1 (ELFIN_CLOCK_POWER_BASE + AHB_CON1_OFFSET) -#define AHB_CON2 (ELFIN_CLOCK_POWER_BASE + AHB_CON2_OFFSET) -#define SELECT_DMA (ELFIN_CLOCK_POWER_BASE + SELECT_DMA_OFFSET) -#define SW_RST (ELFIN_CLOCK_POWER_BASE + SW_RST_OFFSET) -#define SYS_ID (ELFIN_CLOCK_POWER_BASE + SYS_ID_OFFSET) -#define MEM_SYS_CFG (ELFIN_CLOCK_POWER_BASE + MEM_SYS_CFG_OFFSET) -#define QOS_OVERRIDE0 (ELFIN_CLOCK_POWER_BASE + QOS_OVERRIDE0_OFFSET) -#define QOS_OVERRIDE1 (ELFIN_CLOCK_POWER_BASE + QOS_OVERRIDE1_OFFSET) -#define MEM_CFG_STAT (ELFIN_CLOCK_POWER_BASE + MEM_CFG_STAT_OFFSET) -#define PWR_CFG (ELFIN_CLOCK_POWER_BASE + PWR_CFG_OFFSET) -#define EINT_MASK (ELFIN_CLOCK_POWER_BASE + EINT_MASK_OFFSET) -#define NOR_CFG (ELFIN_CLOCK_POWER_BASE + NOR_CFG_OFFSET) -#define STOP_CFG (ELFIN_CLOCK_POWER_BASE + STOP_CFG_OFFSET) -#define SLEEP_CFG (ELFIN_CLOCK_POWER_BASE + SLEEP_CFG_OFFSET) -#define OSC_FREQ (ELFIN_CLOCK_POWER_BASE + OSC_FREQ_OFFSET) -#define OSC_CNT_VAL (ELFIN_CLOCK_POWER_BASE + OSC_CNT_VAL_OFFSET) -#define PWR_CNT_VAL (ELFIN_CLOCK_POWER_BASE + PWR_CNT_VAL_OFFSET) -#define FPC_CNT_VAL (ELFIN_CLOCK_POWER_BASE + FPC_CNT_VAL_OFFSET) -#define MTC_CNT_VAL (ELFIN_CLOCK_POWER_BASE + MTC_CNT_VAL_OFFSET) -#define OTHERS (ELFIN_CLOCK_POWER_BASE + OTHERS_OFFSET) -#define RST_STAT (ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET) -#define WAKEUP_STAT (ELFIN_CLOCK_POWER_BASE + WAKEUP_STAT_OFFSET) -#define BLK_PWR_STAT (ELFIN_CLOCK_POWER_BASE + BLK_PWR_STAT_OFFSET) -#define INF_REG0 (ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET) -#define INF_REG1 (ELFIN_CLOCK_POWER_BASE + INF_REG1_OFFSET) -#define INF_REG2 (ELFIN_CLOCK_POWER_BASE + INF_REG2_OFFSET) -#define INF_REG3 (ELFIN_CLOCK_POWER_BASE + INF_REG3_OFFSET) -#define INF_REG4 (ELFIN_CLOCK_POWER_BASE + INF_REG4_OFFSET) -#define INF_REG5 (ELFIN_CLOCK_POWER_BASE + INF_REG5_OFFSET) -#define INF_REG6 (ELFIN_CLOCK_POWER_BASE + INF_REG6_OFFSET) -#define INF_REG7 (ELFIN_CLOCK_POWER_BASE + INF_REG7_OFFSET) - - -/* - * GPIO - */ -#define ELFIN_GPIO_BASE 0x7f008000 - -#define GPACON_OFFSET 0x00 -#define GPADAT_OFFSET 0x04 -#define GPAPUD_OFFSET 0x08 -#define GPACONSLP_OFFSET 0x0C -#define GPAPUDSLP_OFFSET 0x10 -#define GPBCON_OFFSET 0x20 -#define GPBDAT_OFFSET 0x24 -#define GPBPUD_OFFSET 0x28 -#define GPBCONSLP_OFFSET 0x2C -#define GPBPUDSLP_OFFSET 0x30 -#define GPCCON_OFFSET 0x40 -#define GPCDAT_OFFSET 0x44 -#define GPCPUD_OFFSET 0x48 -#define GPCCONSLP_OFFSET 0x4C -#define GPCPUDSLP_OFFSET 0x50 -#define GPDCON_OFFSET 0x60 -#define GPDDAT_OFFSET 0x64 -#define GPDPUD_OFFSET 0x68 -#define GPDCONSLP_OFFSET 0x6C -#define GPDPUDSLP_OFFSET 0x70 -#define GPECON_OFFSET 0x80 -#define GPEDAT_OFFSET 0x84 -#define GPEPUD_OFFSET 0x88 -#define GPECONSLP_OFFSET 0x8C -#define GPEPUDSLP_OFFSET 0x90 -#define GPFCON_OFFSET 0xA0 -#define GPFDAT_OFFSET 0xA4 -#define GPFPUD_OFFSET 0xA8 -#define GPFCONSLP_OFFSET 0xAC -#define GPFPUDSLP_OFFSET 0xB0 -#define GPGCON_OFFSET 0xC0 -#define GPGDAT_OFFSET 0xC4 -#define GPGPUD_OFFSET 0xC8 -#define GPGCONSLP_OFFSET 0xCC -#define GPGPUDSLP_OFFSET 0xD0 -#define GPHCON0_OFFSET 0xE0 -#define GPHCON1_OFFSET 0xE4 -#define GPHDAT_OFFSET 0xE8 -#define GPHPUD_OFFSET 0xEC -#define GPHCONSLP_OFFSET 0xF0 -#define GPHPUDSLP_OFFSET 0xF4 -#define GPICON_OFFSET 0x100 -#define GPIDAT_OFFSET 0x104 -#define GPIPUD_OFFSET 0x108 -#define GPICONSLP_OFFSET 0x10C -#define GPIPUDSLP_OFFSET 0x110 -#define GPJCON_OFFSET 0x120 -#define GPJDAT_OFFSET 0x124 -#define GPJPUD_OFFSET 0x128 -#define GPJCONSLP_OFFSET 0x12C -#define GPJPUDSLP_OFFSET 0x130 -#define MEM0DRVCON_OFFSET 0x1D0 -#define MEM1DRVCON_OFFSET 0x1D4 -#define GPKCON0_OFFSET 0x800 -#define GPKCON1_OFFSET 0x804 -#define GPKDAT_OFFSET 0x808 -#define GPKPUD_OFFSET 0x80C -#define GPLCON0_OFFSET 0x810 -#define GPLCON1_OFFSET 0x814 -#define GPLDAT_OFFSET 0x818 -#define GPLPUD_OFFSET 0x81C -#define GPMCON_OFFSET 0x820 -#define GPMDAT_OFFSET 0x824 -#define GPMPUD_OFFSET 0x828 -#define GPNCON_OFFSET 0x830 -#define GPNDAT_OFFSET 0x834 -#define GPNPUD_OFFSET 0x838 -#define GPOCON_OFFSET 0x140 -#define GPODAT_OFFSET 0x144 -#define GPOPUD_OFFSET 0x148 -#define GPOCONSLP_OFFSET 0x14C -#define GPOPUDSLP_OFFSET 0x150 -#define GPPCON_OFFSET 0x160 -#define GPPDAT_OFFSET 0x164 -#define GPPPUD_OFFSET 0x168 -#define GPPCONSLP_OFFSET 0x16C -#define GPPPUDSLP_OFFSET 0x170 -#define GPQCON_OFFSET 0x180 -#define GPQDAT_OFFSET 0x184 -#define GPQPUD_OFFSET 0x188 -#define GPQCONSLP_OFFSET 0x18C -#define GPQPUDSLP_OFFSET 0x190 - -#define EINTPEND_OFFSET 0x924 - -#define GPACON_REG __REG(ELFIN_GPIO_BASE + GPACON_OFFSET) -#define GPADAT_REG __REG(ELFIN_GPIO_BASE + GPADAT_OFFSET) -#define GPAPUD_REG __REG(ELFIN_GPIO_BASE + GPAPUD_OFFSET) -#define GPACONSLP_REG __REG(ELFIN_GPIO_BASE + GPACONSLP_OFFSET) -#define GPAPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPAPUDSLP_OFFSET) -#define GPBCON_REG __REG(ELFIN_GPIO_BASE + GPBCON_OFFSET) -#define GPBDAT_REG __REG(ELFIN_GPIO_BASE + GPBDAT_OFFSET) -#define GPBPUD_REG __REG(ELFIN_GPIO_BASE + GPBPUD_OFFSET) -#define GPBCONSLP_REG __REG(ELFIN_GPIO_BASE + GPBCONSLP_OFFSET) -#define GPBPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPBPUDSLP_OFFSET) -#define GPCCON_REG __REG(ELFIN_GPIO_BASE + GPCCON_OFFSET) -#define GPCDAT_REG __REG(ELFIN_GPIO_BASE + GPCDAT_OFFSET) -#define GPCPUD_REG __REG(ELFIN_GPIO_BASE + GPCPUD_OFFSET) -#define GPCCONSLP_REG __REG(ELFIN_GPIO_BASE + GPCCONSLP_OFFSET) -#define GPCPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPCPUDSLP_OFFSET) -#define GPDCON_REG __REG(ELFIN_GPIO_BASE + GPDCON_OFFSET) -#define GPDDAT_REG __REG(ELFIN_GPIO_BASE + GPDDAT_OFFSET) -#define GPDPUD_REG __REG(ELFIN_GPIO_BASE + GPDPUD_OFFSET) -#define GPDCONSLP_REG __REG(ELFIN_GPIO_BASE + GPDCONSLP_OFFSET) -#define GPDPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPDPUDSLP_OFFSET) -#define GPECON_REG __REG(ELFIN_GPIO_BASE + GPECON_OFFSET) -#define GPEDAT_REG __REG(ELFIN_GPIO_BASE + GPEDAT_OFFSET) -#define GPEPUD_REG __REG(ELFIN_GPIO_BASE + GPEPUD_OFFSET) -#define GPECONSLP_REG __REG(ELFIN_GPIO_BASE + GPECONSLP_OFFSET) -#define GPEPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPEPUDSLP_OFFSET) -#define GPFCON_REG __REG(ELFIN_GPIO_BASE + GPFCON_OFFSET) -#define GPFDAT_REG __REG(ELFIN_GPIO_BASE + GPFDAT_OFFSET) -#define GPFPUD_REG __REG(ELFIN_GPIO_BASE + GPFPUD_OFFSET) -#define GPFCONSLP_REG __REG(ELFIN_GPIO_BASE + GPFCONSLP_OFFSET) -#define GPFPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPFPUDSLP_OFFSET) -#define GPGCON_REG __REG(ELFIN_GPIO_BASE + GPGCON_OFFSET) -#define GPGDAT_REG __REG(ELFIN_GPIO_BASE + GPGDAT_OFFSET) -#define GPGPUD_REG __REG(ELFIN_GPIO_BASE + GPGPUD_OFFSET) -#define GPGCONSLP_REG __REG(ELFIN_GPIO_BASE + GPGCONSLP_OFFSET) -#define GPGPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPGPUDSLP_OFFSET) -#define GPHCON0_REG __REG(ELFIN_GPIO_BASE + GPHCON0_OFFSET) -#define GPHCON1_REG __REG(ELFIN_GPIO_BASE + GPHCON1_OFFSET) -#define GPHDAT_REG __REG(ELFIN_GPIO_BASE + GPHDAT_OFFSET) -#define GPHPUD_REG __REG(ELFIN_GPIO_BASE + GPHPUD_OFFSET) -#define GPHCONSLP_REG __REG(ELFIN_GPIO_BASE + GPHCONSLP_OFFSET) -#define GPHPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPHPUDSLP_OFFSET) -#define GPICON_REG __REG(ELFIN_GPIO_BASE + GPICON_OFFSET) -#define GPIDAT_REG __REG(ELFIN_GPIO_BASE + GPIDAT_OFFSET) -#define GPIPUD_REG __REG(ELFIN_GPIO_BASE + GPIPUD_OFFSET) -#define GPICONSLP_REG __REG(ELFIN_GPIO_BASE + GPICONSLP_OFFSET) -#define GPIPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPIPUDSLP_OFFSET) -#define GPJCON_REG __REG(ELFIN_GPIO_BASE + GPJCON_OFFSET) -#define GPJDAT_REG __REG(ELFIN_GPIO_BASE + GPJDAT_OFFSET) -#define GPJPUD_REG __REG(ELFIN_GPIO_BASE + GPJPUD_OFFSET) -#define GPJCONSLP_REG __REG(ELFIN_GPIO_BASE + GPJCONSLP_OFFSET) -#define GPJPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPJPUDSLP_OFFSET) -#define GPKCON0_REG __REG(ELFIN_GPIO_BASE + GPKCON0_OFFSET) -#define GPKCON1_REG __REG(ELFIN_GPIO_BASE + GPKCON1_OFFSET) -#define GPKDAT_REG __REG(ELFIN_GPIO_BASE + GPKDAT_OFFSET) -#define GPKPUD_REG __REG(ELFIN_GPIO_BASE + GPKPUD_OFFSET) -#define GPLCON0_REG __REG(ELFIN_GPIO_BASE + GPLCON0_OFFSET) -#define GPLCON1_REG __REG(ELFIN_GPIO_BASE + GPLCON1_OFFSET) -#define GPLDAT_REG __REG(ELFIN_GPIO_BASE + GPLDAT_OFFSET) -#define GPLPUD_REG __REG(ELFIN_GPIO_BASE + GPLPUD_OFFSET) -#define GPMCON_REG __REG(ELFIN_GPIO_BASE + GPMCON_OFFSET) -#define GPMDAT_REG __REG(ELFIN_GPIO_BASE + GPMDAT_OFFSET) -#define GPMPUD_REG __REG(ELFIN_GPIO_BASE + GPMPUD_OFFSET) -#define GPNCON_REG __REG(ELFIN_GPIO_BASE + GPNCON_OFFSET) -#define GPNDAT_REG __REG(ELFIN_GPIO_BASE + GPNDAT_OFFSET) -#define GPNPUD_REG __REG(ELFIN_GPIO_BASE + GPNPUD_OFFSET) -#define GPOCON_REG __REG(ELFIN_GPIO_BASE + GPOCON_OFFSET) -#define GPODAT_REG __REG(ELFIN_GPIO_BASE + GPODAT_OFFSET) -#define GPOPUD_REG __REG(ELFIN_GPIO_BASE + GPOPUD_OFFSET) -#define GPOCONSLP_REG __REG(ELFIN_GPIO_BASE + GPOCONSLP_OFFSET) -#define GPOPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPOPUDSLP_OFFSET) -#define GPPCON_REG __REG(ELFIN_GPIO_BASE + GPPCON_OFFSET) -#define GPPDAT_REG __REG(ELFIN_GPIO_BASE + GPPDAT_OFFSET) -#define GPPPUD_REG __REG(ELFIN_GPIO_BASE + GPPPUD_OFFSET) -#define GPPCONSLP_REG __REG(ELFIN_GPIO_BASE + GPPCONSLP_OFFSET) -#define GPPPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPPPUDSLP_OFFSET) -#define GPQCON_REG __REG(ELFIN_GPIO_BASE + GPQCON_OFFSET) -#define GPQDAT_REG __REG(ELFIN_GPIO_BASE + GPQDAT_OFFSET) -#define GPQPUD_REG __REG(ELFIN_GPIO_BASE + GPQPUD_OFFSET) -#define GPQCONSLP_REG __REG(ELFIN_GPIO_BASE + GPQCONSLP_OFFSET) -#define GPQPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPQPUDSLP_OFFSET) - -/* - * Bus Matrix - */ -#define ELFIN_MEM_SYS_CFG 0x7e00f120 - -#define S3C64XX_MEM_SYS_CFG_16BIT (1 << 12) - -#define S3C64XX_MEM_SYS_CFG_NAND 0x0008 -#define S3C64XX_MEM_SYS_CFG_ONENAND S3C64XX_MEM_SYS_CFG_16BIT - -#define GPACON (ELFIN_GPIO_BASE + GPACON_OFFSET) -#define GPADAT (ELFIN_GPIO_BASE + GPADAT_OFFSET) -#define GPAPUD (ELFIN_GPIO_BASE + GPAPUD_OFFSET) -#define GPACONSLP (ELFIN_GPIO_BASE + GPACONSLP_OFFSET) -#define GPAPUDSLP (ELFIN_GPIO_BASE + GPAPUDSLP_OFFSET) -#define GPBCON (ELFIN_GPIO_BASE + GPBCON_OFFSET) -#define GPBDAT (ELFIN_GPIO_BASE + GPBDAT_OFFSET) -#define GPBPUD (ELFIN_GPIO_BASE + GPBPUD_OFFSET) -#define GPBCONSLP (ELFIN_GPIO_BASE + GPBCONSLP_OFFSET) -#define GPBPUDSLP (ELFIN_GPIO_BASE + GPBPUDSLP_OFFSET) -#define GPCCON (ELFIN_GPIO_BASE + GPCCON_OFFSET) -#define GPCDAT (ELFIN_GPIO_BASE + GPCDAT_OFFSET) -#define GPCPUD (ELFIN_GPIO_BASE + GPCPUD_OFFSET) -#define GPCCONSLP (ELFIN_GPIO_BASE + GPCCONSLP_OFFSET) -#define GPCPUDSLP (ELFIN_GPIO_BASE + GPCPUDSLP_OFFSET) -#define GPDCON (ELFIN_GPIO_BASE + GPDCON_OFFSET) -#define GPDDAT (ELFIN_GPIO_BASE + GPDDAT_OFFSET) -#define GPDPUD (ELFIN_GPIO_BASE + GPDPUD_OFFSET) -#define GPDCONSLP (ELFIN_GPIO_BASE + GPDCONSLP_OFFSET) -#define GPDPUDSLP (ELFIN_GPIO_BASE + GPDPUDSLP_OFFSET) -#define GPECON (ELFIN_GPIO_BASE + GPECON_OFFSET) -#define GPEDAT (ELFIN_GPIO_BASE + GPEDAT_OFFSET) -#define GPEPUD (ELFIN_GPIO_BASE + GPEPUD_OFFSET) -#define GPECONSLP (ELFIN_GPIO_BASE + GPECONSLP_OFFSET) -#define GPEPUDSLP (ELFIN_GPIO_BASE + GPEPUDSLP_OFFSET) -#define GPFCON (ELFIN_GPIO_BASE + GPFCON_OFFSET) -#define GPFDAT (ELFIN_GPIO_BASE + GPFDAT_OFFSET) -#define GPFPUD (ELFIN_GPIO_BASE + GPFPUD_OFFSET) -#define GPFCONSLP (ELFIN_GPIO_BASE + GPFCONSLP_OFFSET) -#define GPFPUDSLP (ELFIN_GPIO_BASE + GPFPUDSLP_OFFSET) -#define GPGCON (ELFIN_GPIO_BASE + GPGCON_OFFSET) -#define GPGDAT (ELFIN_GPIO_BASE + GPGDAT_OFFSET) -#define GPGPUD (ELFIN_GPIO_BASE + GPGPUD_OFFSET) -#define GPGCONSLP (ELFIN_GPIO_BASE + GPGCONSLP_OFFSET) -#define GPGPUDSLP (ELFIN_GPIO_BASE + GPGPUDSLP_OFFSET) -#define GPHCON0 (ELFIN_GPIO_BASE + GPHCON0_OFFSET) -#define GPHCON1 (ELFIN_GPIO_BASE + GPHCON1_OFFSET) -#define GPHDAT (ELFIN_GPIO_BASE + GPHDAT_OFFSET) -#define GPHPUD (ELFIN_GPIO_BASE + GPHPUD_OFFSET) -#define GPHCONSLP (ELFIN_GPIO_BASE + GPHCONSLP_OFFSET) -#define GPHPUDSLP (ELFIN_GPIO_BASE + GPHPUDSLP_OFFSET) -#define GPICON (ELFIN_GPIO_BASE + GPICON_OFFSET) -#define GPIDAT (ELFIN_GPIO_BASE + GPIDAT_OFFSET) -#define GPIPUD (ELFIN_GPIO_BASE + GPIPUD_OFFSET) -#define GPICONSLP (ELFIN_GPIO_BASE + GPICONSLP_OFFSET) -#define GPIPUDSLP (ELFIN_GPIO_BASE + GPIPUDSLP_OFFSET) -#define GPJCON (ELFIN_GPIO_BASE + GPJCON_OFFSET) -#define GPJDAT (ELFIN_GPIO_BASE + GPJDAT_OFFSET) -#define GPJPUD (ELFIN_GPIO_BASE + GPJPUD_OFFSET) -#define GPJCONSLP (ELFIN_GPIO_BASE + GPJCONSLP_OFFSET) -#define GPJPUDSLP (ELFIN_GPIO_BASE + GPJPUDSLP_OFFSET) -#define GPKCON0 (ELFIN_GPIO_BASE + GPKCON0_OFFSET) -#define GPKCON1 (ELFIN_GPIO_BASE + GPKCON1_OFFSET) -#define GPKDAT (ELFIN_GPIO_BASE + GPKDAT_OFFSET) -#define GPKPUD (ELFIN_GPIO_BASE + GPKPUD_OFFSET) -#define GPLCON0 (ELFIN_GPIO_BASE + GPLCON0_OFFSET) -#define GPLCON1 (ELFIN_GPIO_BASE + GPLCON1_OFFSET) -#define GPLDAT (ELFIN_GPIO_BASE + GPLDAT_OFFSET) -#define GPLPUD (ELFIN_GPIO_BASE + GPLPUD_OFFSET) -#define GPMCON (ELFIN_GPIO_BASE + GPMCON_OFFSET) -#define GPMDAT (ELFIN_GPIO_BASE + GPMDAT_OFFSET) -#define GPMPUD (ELFIN_GPIO_BASE + GPMPUD_OFFSET) -#define GPNCON (ELFIN_GPIO_BASE + GPNCON_OFFSET) -#define GPNDAT (ELFIN_GPIO_BASE + GPNDAT_OFFSET) -#define GPNPUD (ELFIN_GPIO_BASE + GPNPUD_OFFSET) -#define GPOCON (ELFIN_GPIO_BASE + GPOCON_OFFSET) -#define GPODAT (ELFIN_GPIO_BASE + GPODAT_OFFSET) -#define GPOPUD (ELFIN_GPIO_BASE + GPOPUD_OFFSET) -#define GPOCONSLP (ELFIN_GPIO_BASE + GPOCONSLP_OFFSET) -#define GPOPUDSLP (ELFIN_GPIO_BASE + GPOPUDSLP_OFFSET) -#define GPPCON (ELFIN_GPIO_BASE + GPPCON_OFFSET) -#define GPPDAT (ELFIN_GPIO_BASE + GPPDAT_OFFSET) -#define GPPPUD (ELFIN_GPIO_BASE + GPPPUD_OFFSET) -#define GPPCONSLP (ELFIN_GPIO_BASE + GPPCONSLP_OFFSET) -#define GPPPUDSLP (ELFIN_GPIO_BASE + GPPPUDSLP_OFFSET) -#define GPQCON (ELFIN_GPIO_BASE + GPQCON_OFFSET) -#define GPQDAT (ELFIN_GPIO_BASE + GPQDAT_OFFSET) -#define GPQPUD (ELFIN_GPIO_BASE + GPQPUD_OFFSET) -#define GPQCONSLP (ELFIN_GPIO_BASE + GPQCONSLP_OFFSET) -#define GPQPUDSLP (ELFIN_GPIO_BASE + GPQPUDSLP_OFFSET) - -/* - * Memory controller - */ -#define ELFIN_SROM_BASE 0x70000000 - -#define SROM_BW_REG __REG(ELFIN_SROM_BASE + 0x0) -#define SROM_BC0_REG __REG(ELFIN_SROM_BASE + 0x4) -#define SROM_BC1_REG __REG(ELFIN_SROM_BASE + 0x8) -#define SROM_BC2_REG __REG(ELFIN_SROM_BASE + 0xC) -#define SROM_BC3_REG __REG(ELFIN_SROM_BASE + 0x10) -#define SROM_BC4_REG __REG(ELFIN_SROM_BASE + 0x14) -#define SROM_BC5_REG __REG(ELFIN_SROM_BASE + 0x18) - -/* - * SDRAM Controller - */ -#define ELFIN_DMC0_BASE 0x7e000000 -#define ELFIN_DMC1_BASE 0x7e001000 - -#define INDEX_DMC_MEMC_STATUS 0x00 -#define INDEX_DMC_MEMC_CMD 0x04 -#define INDEX_DMC_DIRECT_CMD 0x08 -#define INDEX_DMC_MEMORY_CFG 0x0C -#define INDEX_DMC_REFRESH_PRD 0x10 -#define INDEX_DMC_CAS_LATENCY 0x14 -#define INDEX_DMC_T_DQSS 0x18 -#define INDEX_DMC_T_MRD 0x1C -#define INDEX_DMC_T_RAS 0x20 -#define INDEX_DMC_T_RC 0x24 -#define INDEX_DMC_T_RCD 0x28 -#define INDEX_DMC_T_RFC 0x2C -#define INDEX_DMC_T_RP 0x30 -#define INDEX_DMC_T_RRD 0x34 -#define INDEX_DMC_T_WR 0x38 -#define INDEX_DMC_T_WTR 0x3C -#define INDEX_DMC_T_XP 0x40 -#define INDEX_DMC_T_XSR 0x44 -#define INDEX_DMC_T_ESR 0x48 -#define INDEX_DMC_MEMORY_CFG2 0x4C -#define INDEX_DMC_CHIP_0_CFG 0x200 -#define INDEX_DMC_CHIP_1_CFG 0x204 -#define INDEX_DMC_CHIP_2_CFG 0x208 -#define INDEX_DMC_CHIP_3_CFG 0x20C -#define INDEX_DMC_USER_STATUS 0x300 -#define INDEX_DMC_USER_CONFIG 0x304 - -/* - * Memory Chip direct command - */ -#define DMC_NOP0 0x0c0000 -#define DMC_NOP1 0x1c0000 -#define DMC_PA0 0x000000 /* Precharge all */ -#define DMC_PA1 0x100000 -#define DMC_AR0 0x040000 /* Autorefresh */ -#define DMC_AR1 0x140000 -#define DMC_SDR_MR0 0x080032 /* MRS, CAS 3, Burst Length 4 */ -#define DMC_SDR_MR1 0x180032 -#define DMC_DDR_MR0 0x080162 -#define DMC_DDR_MR1 0x180162 -#define DMC_mDDR_MR0 0x080032 /* CAS 3, Burst Length 4 */ -#define DMC_mDDR_MR1 0x180032 -#define DMC_mSDR_EMR0 0x0a0000 /* EMRS, DS:Full, PASR:Full Array */ -#define DMC_mSDR_EMR1 0x1a0000 -#define DMC_DDR_EMR0 0x090000 -#define DMC_DDR_EMR1 0x190000 -#define DMC_mDDR_EMR0 0x0a0000 /* DS:Full, PASR:Full Array */ -#define DMC_mDDR_EMR1 0x1a0000 - -/* - * Definitions for memory configuration - * Set memory configuration - * active_chips = 1'b0 (1 chip) - * qos_master_chip = 3'b000(ARID[3:0]) - * memory burst = 3'b010(burst 4) - * stop_mem_clock = 1'b0(disable dynamical stop) - * auto_power_down = 1'b0(disable auto power-down mode) - * power_down_prd = 6'b00_0000(0 cycle for auto power-down) - * ap_bit = 1'b0 (bit position of auto-precharge is 10) - * row_bits = 3'b010(# row address 13) - * column_bits = 3'b010(# column address 10 ) - * - * Set user configuration - * 2'b10=SDRAM/mSDRAM, 2'b11=DDR, 2'b01=mDDR - * - * Set chip select for chip [n] - * row bank control, bank address 0x3000_0000 ~ 0x37ff_ffff - * CHIP_[n]_CFG=0x30F8, 30: ADDR[31:24], F8: Mask[31:24] - */ - -/* - * Nand flash controller - */ -#define ELFIN_NAND_BASE 0x70200000 - -#define NFCONF_OFFSET 0x00 -#define NFCONT_OFFSET 0x04 -#define NFCMMD_OFFSET 0x08 -#define NFADDR_OFFSET 0x0c -#define NFDATA_OFFSET 0x10 -#define NFMECCDATA0_OFFSET 0x14 -#define NFMECCDATA1_OFFSET 0x18 -#define NFSECCDATA0_OFFSET 0x1c -#define NFSBLK_OFFSET 0x20 -#define NFEBLK_OFFSET 0x24 -#define NFSTAT_OFFSET 0x28 -#define NFESTAT0_OFFSET 0x2c -#define NFESTAT1_OFFSET 0x30 -#define NFMECC0_OFFSET 0x34 -#define NFMECC1_OFFSET 0x38 -#define NFSECC_OFFSET 0x3c -#define NFMLCBITPT_OFFSET 0x40 - -#define NFCONF (ELFIN_NAND_BASE + NFCONF_OFFSET) -#define NFCONT (ELFIN_NAND_BASE + NFCONT_OFFSET) -#define NFCMMD (ELFIN_NAND_BASE + NFCMMD_OFFSET) -#define NFADDR (ELFIN_NAND_BASE + NFADDR_OFFSET) -#define NFDATA (ELFIN_NAND_BASE + NFDATA_OFFSET) -#define NFMECCDATA0 (ELFIN_NAND_BASE + NFMECCDATA0_OFFSET) -#define NFMECCDATA1 (ELFIN_NAND_BASE + NFMECCDATA1_OFFSET) -#define NFSECCDATA0 (ELFIN_NAND_BASE + NFSECCDATA0_OFFSET) -#define NFSBLK (ELFIN_NAND_BASE + NFSBLK_OFFSET) -#define NFEBLK (ELFIN_NAND_BASE + NFEBLK_OFFSET) -#define NFSTAT (ELFIN_NAND_BASE + NFSTAT_OFFSET) -#define NFESTAT0 (ELFIN_NAND_BASE + NFESTAT0_OFFSET) -#define NFESTAT1 (ELFIN_NAND_BASE + NFESTAT1_OFFSET) -#define NFMECC0 (ELFIN_NAND_BASE + NFMECC0_OFFSET) -#define NFMECC1 (ELFIN_NAND_BASE + NFMECC1_OFFSET) -#define NFSECC (ELFIN_NAND_BASE + NFSECC_OFFSET) -#define NFMLCBITPT (ELFIN_NAND_BASE + NFMLCBITPT_OFFSET) - -#define NFCONF_REG __REG(ELFIN_NAND_BASE + NFCONF_OFFSET) -#define NFCONT_REG __REG(ELFIN_NAND_BASE + NFCONT_OFFSET) -#define NFCMD_REG __REG(ELFIN_NAND_BASE + NFCMMD_OFFSET) -#define NFADDR_REG __REG(ELFIN_NAND_BASE + NFADDR_OFFSET) -#define NFDATA_REG __REG(ELFIN_NAND_BASE + NFDATA_OFFSET) -#define NFDATA8_REG __REGb(ELFIN_NAND_BASE + NFDATA_OFFSET) -#define NFMECCDATA0_REG __REG(ELFIN_NAND_BASE + NFMECCDATA0_OFFSET) -#define NFMECCDATA1_REG __REG(ELFIN_NAND_BASE + NFMECCDATA1_OFFSET) -#define NFSECCDATA0_REG __REG(ELFIN_NAND_BASE + NFSECCDATA0_OFFSET) -#define NFSBLK_REG __REG(ELFIN_NAND_BASE + NFSBLK_OFFSET) -#define NFEBLK_REG __REG(ELFIN_NAND_BASE + NFEBLK_OFFSET) -#define NFSTAT_REG __REG(ELFIN_NAND_BASE + NFSTAT_OFFSET) -#define NFESTAT0_REG __REG(ELFIN_NAND_BASE + NFESTAT0_OFFSET) -#define NFESTAT1_REG __REG(ELFIN_NAND_BASE + NFESTAT1_OFFSET) -#define NFMECC0_REG __REG(ELFIN_NAND_BASE + NFMECC0_OFFSET) -#define NFMECC1_REG __REG(ELFIN_NAND_BASE + NFMECC1_OFFSET) -#define NFSECC_REG __REG(ELFIN_NAND_BASE + NFSECC_OFFSET) -#define NFMLCBITPT_REG __REG(ELFIN_NAND_BASE + NFMLCBITPT_OFFSET) - -#define NFCONF_ECC_4BIT (1<<24) - -#define NFCONT_ECC_ENC (1<<18) -#define NFCONT_WP (1<<16) -#define NFCONT_MECCLOCK (1<<7) -#define NFCONT_SECCLOCK (1<<6) -#define NFCONT_INITMECC (1<<5) -#define NFCONT_INITSECC (1<<4) -#define NFCONT_INITECC (NFCONT_INITMECC | NFCONT_INITSECC) -#define NFCONT_CS_ALT (1<<2) -#define NFCONT_CS (1<<1) -#define NFCONT_ENABLE (1<<0) - -#define NFSTAT_ECCENCDONE (1<<7) -#define NFSTAT_ECCDECDONE (1<<6) -#define NFSTAT_RnB (1<<0) - -#define NFESTAT0_ECCBUSY (1<<31) - -/* - * Interrupt - */ -#define ELFIN_VIC0_BASE_ADDR 0x71200000 -#define ELFIN_VIC1_BASE_ADDR 0x71300000 -#define oINTMOD 0x0C /* VIC INT SELECT (IRQ or FIQ) */ -#define oINTUNMSK 0x10 /* VIC INT EN (write 1 to unmask) */ -#define oINTMSK 0x14 /* VIC INT EN CLEAR (write 1 to mask) */ -#define oINTSUBMSK 0x1C /* VIC SOFT INT CLEAR */ -#define oVECTADDR 0xF00 /* VIC ADDRESS */ - -/* - * Watchdog timer - */ -#define ELFIN_WATCHDOG_BASE 0x7E004000 - -#define WTCON_REG __REG(0x7E004004) -#define WTDAT_REG __REG(0x7E004008) -#define WTCNT_REG __REG(0x7E00400C) - - -/* - * UART - */ -#define ELFIN_UART_BASE 0x7F005000 - -#define ELFIN_UART0_OFFSET 0x0000 -#define ELFIN_UART1_OFFSET 0x0400 -#define ELFIN_UART2_OFFSET 0x0800 - -#define ULCON_OFFSET 0x00 -#define UCON_OFFSET 0x04 -#define UFCON_OFFSET 0x08 -#define UMCON_OFFSET 0x0C -#define UTRSTAT_OFFSET 0x10 -#define UERSTAT_OFFSET 0x14 -#define UFSTAT_OFFSET 0x18 -#define UMSTAT_OFFSET 0x1C -#define UTXH_OFFSET 0x20 -#define URXH_OFFSET 0x24 -#define UBRDIV_OFFSET 0x28 -#define UDIVSLOT_OFFSET 0x2C -#define UINTP_OFFSET 0x30 -#define UINTSP_OFFSET 0x34 -#define UINTM_OFFSET 0x38 - -#define ULCON0_REG __REG(0x7F005000) -#define UCON0_REG __REG(0x7F005004) -#define UFCON0_REG __REG(0x7F005008) -#define UMCON0_REG __REG(0x7F00500C) -#define UTRSTAT0_REG __REG(0x7F005010) -#define UERSTAT0_REG __REG(0x7F005014) -#define UFSTAT0_REG __REG(0x7F005018) -#define UMSTAT0_REG __REG(0x7F00501c) -#define UTXH0_REG __REG(0x7F005020) -#define URXH0_REG __REG(0x7F005024) -#define UBRDIV0_REG __REG(0x7F005028) -#define UDIVSLOT0_REG __REG(0x7F00502c) -#define UINTP0_REG __REG(0x7F005030) -#define UINTSP0_REG __REG(0x7F005034) -#define UINTM0_REG __REG(0x7F005038) - -#define ULCON1_REG __REG(0x7F005400) -#define UCON1_REG __REG(0x7F005404) -#define UFCON1_REG __REG(0x7F005408) -#define UMCON1_REG __REG(0x7F00540C) -#define UTRSTAT1_REG __REG(0x7F005410) -#define UERSTAT1_REG __REG(0x7F005414) -#define UFSTAT1_REG __REG(0x7F005418) -#define UMSTAT1_REG __REG(0x7F00541c) -#define UTXH1_REG __REG(0x7F005420) -#define URXH1_REG __REG(0x7F005424) -#define UBRDIV1_REG __REG(0x7F005428) -#define UDIVSLOT1_REG __REG(0x7F00542c) -#define UINTP1_REG __REG(0x7F005430) -#define UINTSP1_REG __REG(0x7F005434) -#define UINTM1_REG __REG(0x7F005438) - -#define UTRSTAT_TX_EMPTY (1 << 2) -#define UTRSTAT_RX_READY (1 << 0) -#define UART_ERR_MASK 0xF - -/* - * PWM timer - */ -#define ELFIN_TIMER_BASE 0x7F006000 - -#define TCFG0_REG __REG(0x7F006000) -#define TCFG1_REG __REG(0x7F006004) -#define TCON_REG __REG(0x7F006008) -#define TCNTB0_REG __REG(0x7F00600c) -#define TCMPB0_REG __REG(0x7F006010) -#define TCNTO0_REG __REG(0x7F006014) -#define TCNTB1_REG __REG(0x7F006018) -#define TCMPB1_REG __REG(0x7F00601c) -#define TCNTO1_REG __REG(0x7F006020) -#define TCNTB2_REG __REG(0x7F006024) -#define TCMPB2_REG __REG(0x7F006028) -#define TCNTO2_REG __REG(0x7F00602c) -#define TCNTB3_REG __REG(0x7F006030) -#define TCMPB3_REG __REG(0x7F006034) -#define TCNTO3_REG __REG(0x7F006038) -#define TCNTB4_REG __REG(0x7F00603c) -#define TCNTO4_REG __REG(0x7F006040) - -/* Fields */ -#define fTCFG0_DZONE Fld(8, 16) /* the dead zone length (=timer 0) */ -#define fTCFG0_PRE1 Fld(8, 8) /* prescaler value for time 2,3,4 */ -#define fTCFG0_PRE0 Fld(8, 0) /* prescaler value for time 0,1 */ -#define fTCFG1_MUX4 Fld(4, 16) -/* bits */ -#define TCFG0_DZONE(x) FInsrt((x), fTCFG0_DZONE) -#define TCFG0_PRE1(x) FInsrt((x), fTCFG0_PRE1) -#define TCFG0_PRE0(x) FInsrt((x), fTCFG0_PRE0) -#define TCON_4_AUTO (1 << 22) /* auto reload on/off for Timer 4 */ -#define TCON_4_UPDATE (1 << 21) /* manual Update TCNTB4 */ -#define TCON_4_ONOFF (1 << 20) /* 0: Stop, 1: start Timer 4 */ -#define COUNT_4_ON (TCON_4_ONOFF * 1) -#define COUNT_4_OFF (TCON_4_ONOFF * 0) -#define TCON_3_AUTO (1 << 19) /* auto reload on/off for Timer 3 */ -#define TIMER3_ATLOAD_ON (TCON_3_AUTO * 1) -#define TIMER3_ATLAOD_OFF FClrBit(TCON, TCON_3_AUTO) -#define TCON_3_INVERT (1 << 18) /* 1: Inverter on for TOUT3 */ -#define TIMER3_IVT_ON (TCON_3_INVERT * 1) -#define TIMER3_IVT_OFF (FClrBit(TCON, TCON_3_INVERT)) -#define TCON_3_MAN (1 << 17) /* manual Update TCNTB3,TCMPB3 */ -#define TIMER3_MANUP (TCON_3_MAN*1) -#define TIMER3_NOP (FClrBit(TCON, TCON_3_MAN)) -#define TCON_3_ONOFF (1 << 16) /* 0: Stop, 1: start Timer 3 */ -#define TIMER3_ON (TCON_3_ONOFF * 1) -#define TIMER3_OFF (FClrBit(TCON, TCON_3_ONOFF)) - -#if defined(CONFIG_CLK_400_100_50) -#define STARTUP_AMDIV 400 -#define STARTUP_MDIV 400 -#define STARTUP_PDIV 6 -#define STARTUP_SDIV 1 -#elif defined(CONFIG_CLK_400_133_66) -#define STARTUP_AMDIV 400 -#define STARTUP_MDIV 533 -#define STARTUP_PDIV 6 -#define STARTUP_SDIV 1 -#elif defined(CONFIG_CLK_533_133_66) -#define STARTUP_AMDIV 533 -#define STARTUP_MDIV 533 -#define STARTUP_PDIV 6 -#define STARTUP_SDIV 1 -#elif defined(CONFIG_CLK_667_133_66) -#define STARTUP_AMDIV 667 -#define STARTUP_MDIV 533 -#define STARTUP_PDIV 6 -#define STARTUP_SDIV 1 -#endif - -#define STARTUP_PCLKDIV 3 -#define STARTUP_HCLKX2DIV 1 -#define STARTUP_HCLKDIV 1 -#define STARTUP_MPLLDIV 1 -#define STARTUP_APLLDIV 0 - -#define CLK_DIV_VAL ((STARTUP_PCLKDIV << 12) | (STARTUP_HCLKX2DIV << 9) | \ - (STARTUP_HCLKDIV << 8) | (STARTUP_MPLLDIV<<4) | STARTUP_APLLDIV) -#define MPLL_VAL ((1 << 31) | (STARTUP_MDIV << 16) | \ - (STARTUP_PDIV << 8) | STARTUP_SDIV) -#define STARTUP_MPLL (((CONFIG_SYS_CLK_FREQ >> STARTUP_SDIV) / \ - STARTUP_PDIV) * STARTUP_MDIV) - -#if defined(CONFIG_SYNC_MODE) -#define APLL_VAL ((1 << 31) | (STARTUP_MDIV << 16) | \ - (STARTUP_PDIV << 8) | STARTUP_SDIV) -#define STARTUP_APLL (((CONFIG_SYS_CLK_FREQ >> STARTUP_SDIV) / \ - STARTUP_PDIV) * STARTUP_MDIV) -#define STARTUP_HCLK (STARTUP_MPLL / (STARTUP_HCLKX2DIV + 1) / \ - (STARTUP_HCLKDIV + 1)) -#else -#define APLL_VAL ((1 << 31) | (STARTUP_AMDIV << 16) | \ - (STARTUP_PDIV << 8) | STARTUP_SDIV) -#define STARTUP_APLL (((CONFIG_SYS_CLK_FREQ >> STARTUP_SDIV) / \ - STARTUP_PDIV) * STARTUP_AMDIV) -#define STARTUP_HCLK (STARTUP_MPLL / (STARTUP_HCLKX2DIV + 1) / \ - (STARTUP_HCLKDIV + 1)) -#endif - - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define DMC1_MEM_CFG 0x00010012 /* burst 4, 13-bit row, 10-bit col */ -#define DMC1_MEM_CFG2 0xB45 -#define DMC1_CHIP0_CFG 0x150F8 /* 0x5000_0000~0x57ff_ffff (128 MiB) */ -#define DMC_DDR_32_CFG 0x0 /* 32bit, DDR */ - -/* Memory Parameters */ -/* DDR Parameters */ -#define DDR_tREFRESH 7800 /* ns */ -#define DDR_tRAS 45 /* ns (min: 45ns)*/ -#define DDR_tRC 68 /* ns (min: 67.5ns)*/ -#define DDR_tRCD 23 /* ns (min: 22.5ns)*/ -#define DDR_tRFC 80 /* ns (min: 80ns)*/ -#define DDR_tRP 23 /* ns (min: 22.5ns)*/ -#define DDR_tRRD 15 /* ns (min: 15ns)*/ -#define DDR_tWR 15 /* ns (min: 15ns)*/ -#define DDR_tXSR 120 /* ns (min: 120ns)*/ -#define DDR_CASL 3 /* CAS Latency 3 */ - -/* - * mDDR memory configuration - */ - -#define NS_TO_CLK(t) ((STARTUP_HCLK / 1000 * (t) - 1) / 1000000) - -#define DMC_DDR_BA_EMRS 2 -#define DMC_DDR_MEM_CASLAT 3 -/* 6 Set Cas Latency to 3 */ -#define DMC_DDR_CAS_LATENCY (DDR_CASL << 1) -/* Min 0.75 ~ 1.25 */ -#define DMC_DDR_t_DQSS 1 -/* Min 2 tck */ -#define DMC_DDR_t_MRD 2 -/* 7, Min 45ns */ -#define DMC_DDR_t_RAS (NS_TO_CLK(DDR_tRAS) + 1) -/* 10, Min 67.5ns */ -#define DMC_DDR_t_RC (NS_TO_CLK(DDR_tRC) + 1) -/* 4,5(TRM), Min 22.5ns */ -#define DMC_DDR_t_RCD (NS_TO_CLK(DDR_tRCD) + 1) -#define DMC_DDR_schedule_RCD ((DMC_DDR_t_RCD - 3) << 3) -/* 11,18(TRM) Min 80ns */ -#define DMC_DDR_t_RFC (NS_TO_CLK(DDR_tRFC) + 1) -#define DMC_DDR_schedule_RFC ((DMC_DDR_t_RFC - 3) << 5) -/* 4, 5(TRM) Min 22.5ns */ -#define DMC_DDR_t_RP (NS_TO_CLK(DDR_tRP) + 1) -#define DMC_DDR_schedule_RP ((DMC_DDR_t_RP - 3) << 3) -/* 3, Min 15ns */ -#define DMC_DDR_t_RRD (NS_TO_CLK(DDR_tRRD) + 1) -/* Min 15ns */ -#define DMC_DDR_t_WR (NS_TO_CLK(DDR_tWR) + 1) -#define DMC_DDR_t_WTR 2 -/* 1tck + tIS(1.5ns) */ -#define DMC_DDR_t_XP 2 -/* 17, Min 120ns */ -#define DMC_DDR_t_XSR (NS_TO_CLK(DDR_tXSR) + 1) -#define DMC_DDR_t_ESR DMC_DDR_t_XSR -/* TRM 2656 */ -#define DMC_DDR_REFRESH_PRD (NS_TO_CLK(DDR_tREFRESH)) -/* 2b01 : mDDR */ -#define DMC_DDR_USER_CONFIG 1 - -#ifndef __ASSEMBLY__ -enum s3c64xx_uarts_nr { - S3C64XX_UART0, - S3C64XX_UART1, - S3C64XX_UART2, -}; - -#include "s3c64x0.h" - -static inline s3c64xx_uart *s3c64xx_get_base_uart(enum s3c64xx_uarts_nr nr) -{ - return (s3c64xx_uart *)(ELFIN_UART_BASE + (nr * 0x400)); -} -#endif - -#endif /*__S3C6400_H__*/ diff --git a/arch/arm/include/asm/arch-s3c64xx/s3c64x0.h b/arch/arm/include/asm/arch-s3c64xx/s3c64x0.h deleted file mode 100644 index 0bbf1d0..0000000 --- a/arch/arm/include/asm/arch-s3c64xx/s3c64x0.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - * (C) Copyright 2003 - * David MÃŒller ELSOFT AG Switzerland. d.mueller@elsoft.ch - * - * (C) Copyright 2008 - * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/************************************************ - * NAME : S3C64XX.h - * Version : 31.3.2003 - * - * common stuff for SAMSUNG S3C64XX SoC - ************************************************/ - -#ifndef __S3C64XX_H__ -#define __S3C64XX_H__ - -#if defined(CONFIG_SYNC_MODE) && defined(CONFIG_S3C6400) -#error CONFIG_SYNC_MODE unavailable on S3C6400, please, fix your configuration! -#endif - -#include <asm/types.h> - -/* UART (see manual chapter 11) */ -typedef struct { - volatile u32 ULCON; - volatile u32 UCON; - volatile u32 UFCON; - volatile u32 UMCON; - volatile u32 UTRSTAT; - volatile u32 UERSTAT; - volatile u32 UFSTAT; - volatile u32 UMSTAT; -#ifdef __BIG_ENDIAN - volatile u8 res1[3]; - volatile u8 UTXH; - volatile u8 res2[3]; - volatile u8 URXH; -#else /* Little Endian */ - volatile u8 UTXH; - volatile u8 res1[3]; - volatile u8 URXH; - volatile u8 res2[3]; -#endif - volatile u32 UBRDIV; -#ifdef __BIG_ENDIAN - volatile u8 res3[2]; - volatile u16 UDIVSLOT; -#else - volatile u16 UDIVSLOT; - volatile u8 res3[2]; -#endif -} s3c64xx_uart; - -/* PWM TIMER (see manual chapter 10) */ -typedef struct { - volatile u32 TCNTB; - volatile u32 TCMPB; - volatile u32 TCNTO; -} s3c64xx_timer; - -typedef struct { - volatile u32 TCFG0; - volatile u32 TCFG1; - volatile u32 TCON; - s3c64xx_timer ch[4]; - volatile u32 TCNTB4; - volatile u32 TCNTO4; -} s3c64xx_timers; - -#endif /*__S3C64XX_H__*/ diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h index c5d1e6c..5f11d7b 100644 --- a/arch/arm/include/asm/emif.h +++ b/arch/arm/include/asm/emif.h @@ -1165,7 +1165,6 @@ void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs); #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS extern u32 *const T_num; extern u32 *const T_den; -extern u32 *const emif_sizes; #endif void config_data_eye_leveling_samples(u32 emif_base); diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h index a676b6d..440b041 100644 --- a/arch/arm/include/asm/mach-types.h +++ b/arch/arm/include/asm/mach-types.h @@ -223,7 +223,6 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_MIOA701 1257 #define MACH_TYPE_ARMADILLO5X0 1260 #define MACH_TYPE_CC9P9360JS 1264 -#define MACH_TYPE_SMDK6400 1270 #define MACH_TYPE_NOKIA_N800 1271 #define MACH_TYPE_EP80219 1281 #define MACH_TYPE_GORAMO_MLR 1292 @@ -3640,18 +3639,6 @@ extern unsigned int __machine_arch_type; # define machine_is_cc9p9360js() (0) #endif -#ifdef CONFIG_MACH_SMDK6400 -# ifdef machine_arch_type -# undef machine_arch_type -# define machine_arch_type __machine_arch_type -# else -# define machine_arch_type MACH_TYPE_SMDK6400 -# endif -# define machine_is_smdk6400() (machine_arch_type == MACH_TYPE_SMDK6400) -#else -# define machine_is_smdk6400() (0) -#endif - #ifdef CONFIG_MACH_NOKIA_N800 # ifdef machine_arch_type # undef machine_arch_type diff --git a/arch/arm/include/asm/omap_gpmc.h b/arch/arm/include/asm/omap_gpmc.h new file mode 100644 index 0000000..5cb1df1 --- /dev/null +++ b/arch/arm/include/asm/omap_gpmc.h @@ -0,0 +1,87 @@ +/* + * (C) Copyright 2004-2008 Texas Instruments, <www.ti.com> + * Rohit Choraria <rohitkc@ti.com> + * + * (C) Copyright 2013 Andreas Bießmann <andreas.devel@googlemail.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_OMAP_GPMC_H +#define __ASM_OMAP_GPMC_H + +#include <asm/arch/omap_gpmc.h> + +#define GPMC_BUF_EMPTY 0 +#define GPMC_BUF_FULL 1 + +#define ECCCLEAR (0x1 << 8) +#define ECCRESULTREG1 (0x1 << 0) +#define ECCSIZE512BYTE 0xFF +#define ECCSIZE1 (ECCSIZE512BYTE << 22) +#define ECCSIZE0 (ECCSIZE512BYTE << 12) +#define ECCSIZE0SEL (0x000 << 0) + +/* Generic ECC Layouts */ +/* Large Page x8 NAND device Layout */ +#ifdef GPMC_NAND_ECC_LP_x8_LAYOUT +#define GPMC_NAND_HW_ECC_LAYOUT {\ + .eccbytes = 12,\ + .eccpos = {1, 2, 3, 4, 5, 6, 7, 8,\ + 9, 10, 11, 12},\ + .oobfree = {\ + {.offset = 13,\ + .length = 51 } } \ +} +#endif + +/* Large Page x16 NAND device Layout */ +#ifdef GPMC_NAND_ECC_LP_x16_LAYOUT +#define GPMC_NAND_HW_ECC_LAYOUT {\ + .eccbytes = 12,\ + .eccpos = {2, 3, 4, 5, 6, 7, 8, 9,\ + 10, 11, 12, 13},\ + .oobfree = {\ + {.offset = 14,\ + .length = 50 } } \ +} +#endif + +/* Small Page x8 NAND device Layout */ +#ifdef GPMC_NAND_ECC_SP_x8_LAYOUT +#define GPMC_NAND_HW_ECC_LAYOUT {\ + .eccbytes = 3,\ + .eccpos = {1, 2, 3},\ + .oobfree = {\ + {.offset = 4,\ + .length = 12 } } \ +} +#endif + +/* Small Page x16 NAND device Layout */ +#ifdef GPMC_NAND_ECC_SP_x16_LAYOUT +#define GPMC_NAND_HW_ECC_LAYOUT {\ + .eccbytes = 3,\ + .eccpos = {2, 3, 4},\ + .oobfree = {\ + {.offset = 5,\ + .length = 11 } } \ +} +#endif + +#endif /* __ASM_OMAP_GPMC_H */ diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S index 37d9927..a9657d1 100644 --- a/arch/arm/lib/crt0.S +++ b/arch/arm/lib/crt0.S @@ -24,6 +24,7 @@ #include <config.h> #include <asm-offsets.h> +#include <linux/linkage.h> /* * This file handles the target-independent stages of the U-Boot @@ -63,46 +64,20 @@ * have some work left to do at this point regarding memory, so * call c_runtime_cpu_setup. * - * 6. Branch to either nand_boot() or board_init_r(). + * 6. Branch to board_init_r(). */ /* - * declare nand_boot() or board_init_r() to jump to at end of crt0 - */ - -#if defined(CONFIG_NAND_SPL) - -.globl nand_boot - -#elif ! defined(CONFIG_SPL_BUILD) - -.globl board_init_r - -#endif - -/* - * start and end of BSS - */ - -.globl __bss_start -.globl __bss_end - -/* * entry point of crt0 sequence */ -.global _main - -_main: +ENTRY(_main) /* * Set up initial C runtime environment and call board_init_f(0). */ -#if defined(CONFIG_NAND_SPL) - /* deprecated, use instead CONFIG_SPL_BUILD */ - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) -#elif defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) ldr sp, =(CONFIG_SPL_STACK) #else ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) @@ -118,8 +93,8 @@ _main: /* * Set up intermediate environment (new sp and gd) and call - * relocate_code(addr_sp, gd, addr_moni). Trick here is that - * we'll return 'here' but relocated. + * relocate_code(addr_moni). Trick here is that we'll return + * 'here' but relocated. */ ldr sp, [r8, #GD_START_ADDR_SP] /* r8 = gd->start_addr_sp */ @@ -130,9 +105,7 @@ _main: adr lr, here ldr r0, [r8, #GD_RELOC_OFF] /* lr = gd->start_addr_sp */ add lr, lr, r0 - ldr r0, [r8, #GD_START_ADDR_SP] /* r0 = gd->start_addr_sp */ - mov r1, r8 /* r1 = gd */ - ldr r2, [r8, #GD_RELOCADDR] /* r2 = gd->relocaddr */ + ldr r0, [r8, #GD_RELOCADDR] /* r0 = gd->relocaddr */ b relocate_code here: @@ -153,21 +126,14 @@ clbss_l:cmp r0, r1 /* while not at end of BSS */ bl coloured_LED_init bl red_led_on -#if defined(CONFIG_NAND_SPL) - - /* call _nand_boot() */ - ldr pc, =nand_boot - -#else - /* call board_init_r(gd_t *id, ulong dest_addr) */ mov r0, r8 /* gd_t */ ldr r1, [r8, #GD_RELOCADDR] /* dest_addr */ /* call board_init_r */ ldr pc, =board_init_r /* this is auto-relocated! */ -#endif - /* we should not return here. */ #endif + +ENDPROC(_main) |