diff options
Diffstat (limited to 'arch')
94 files changed, 2600 insertions, 466 deletions
diff --git a/arch/Kconfig b/arch/Kconfig index bf26764..f63cc5a 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -7,6 +7,7 @@ config ARC config ARM bool "ARM architecture" + select HAVE_PRIVATE_LIBGCC select SUPPORT_OF_CONTROL config AVR32 @@ -24,6 +25,7 @@ config MICROBLAZE config MIPS bool "MIPS architecture" + select HAVE_PRIVATE_LIBGCC config NDS32 bool "NDS32 architecture" @@ -36,6 +38,7 @@ config OPENRISC config PPC bool "PowerPC architecture" + select HAVE_PRIVATE_LIBGCC config SANDBOX bool "Sandbox" @@ -43,12 +46,14 @@ config SANDBOX config SH bool "SuperH architecture" + select HAVE_PRIVATE_LIBGCC config SPARC bool "SPARC architecture" config X86 bool "x86 architecture" + select HAVE_PRIVATE_LIBGCC select SUPPORT_OF_CONTROL endchoice diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 72558b8..8f910f3 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -141,6 +141,12 @@ config ARCH_DAVINCI config KIRKWOOD bool "Marvell Kirkwood" +config TARGET_DB_MV784MP_GP + bool "Support db-mv784mp-gp" + +config TARGET_MAXBCM + bool "Support maxbcm" + config TARGET_DEVKIT3250 bool "Support devkit3250" @@ -444,9 +450,15 @@ config TARGET_SUN4I config TARGET_SUN5I bool "Support sun5i" +config TARGET_SUN6I + bool "Support sun6i" + config TARGET_SUN7I bool "Support sun7i" +config TARGET_SUN8I + bool "Support sun8i" + config TARGET_SNOWBALL bool "Support snowball" @@ -567,6 +579,7 @@ source "board/BuS/eb_cpux9k2/Kconfig" source "board/BuS/vl_ma2sc/Kconfig" source "board/CarMediaLab/flea3/Kconfig" source "board/Marvell/aspenite/Kconfig" +source "board/Marvell/db-mv784mp-gp/Kconfig" source "board/Marvell/dkb/Kconfig" source "board/Marvell/gplugd/Kconfig" source "board/afeb9260/Kconfig" @@ -648,6 +661,7 @@ source "board/jornada/Kconfig" source "board/karo/tx25/Kconfig" source "board/logicpd/imx27lite/Kconfig" source "board/logicpd/imx31_litekit/Kconfig" +source "board/maxbcm/Kconfig" source "board/mpl/vcma9/Kconfig" source "board/olimex/mx23_olinuxino/Kconfig" source "board/palmld/Kconfig" diff --git a/arch/arm/cpu/arm926ejs/at91/led.c b/arch/arm/cpu/arm926ejs/at91/led.c index 46ed055..b8d5c78 100644 --- a/arch/arm/cpu/arm926ejs/at91/led.c +++ b/arch/arm/cpu/arm926ejs/at91/led.c @@ -9,6 +9,7 @@ #include <common.h> #include <asm/gpio.h> #include <asm/arch/gpio.h> +#include <status_led.h> #ifdef CONFIG_RED_LED void red_led_on(void) diff --git a/arch/arm/cpu/arm926ejs/kirkwood/Makefile b/arch/arm/cpu/arm926ejs/kirkwood/Makefile index c230ce8..df4756e 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/Makefile +++ b/arch/arm/cpu/arm926ejs/kirkwood/Makefile @@ -7,7 +7,5 @@ # obj-y = cpu.o -obj-y += dram.o -obj-y += mpp.o -obj-y += timer.o obj-y += cache.o +obj-y += mpp.o diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c index 881e2de..9e412bb 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c +++ b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c @@ -9,14 +9,11 @@ #include <common.h> #include <netdev.h> #include <asm/cache.h> -#include <u-boot/md5.h> #include <asm/io.h> #include <asm/arch/cpu.h> -#include <asm/arch/kirkwood.h> +#include <asm/arch/soc.h> #include <mvebu_mmc.h> -#define BUFLEN 16 - void reset_cpu(unsigned long ignored) { struct kwcpu_registers *cpureg = @@ -30,31 +27,6 @@ void reset_cpu(unsigned long ignored) } /* - * Generates Ramdom hex number reading some time varient system registers - * and using md5 algorithm - */ -unsigned char get_random_hex(void) -{ - int i; - u32 inbuf[BUFLEN]; - u8 outbuf[BUFLEN]; - - /* - * in case of 88F6281/88F6282/88F6192 A0, - * Bit7 need to reset to generate random values in KW_REG_UNDOC_0x1470 - * Soc reg offsets KW_REG_UNDOC_0x1470 and KW_REG_UNDOC_0x1478 are - * reserved regs and does not have names at this moment - * (no errata available) - */ - writel(readl(KW_REG_UNDOC_0x1478) & ~(1 << 7), KW_REG_UNDOC_0x1478); - for (i = 0; i < BUFLEN; i++) { - inbuf[i] = readl(KW_REG_UNDOC_0x1470); - } - md5((u8 *) inbuf, (BUFLEN * sizeof(u32)), outbuf); - return outbuf[outbuf[7] % 0x0f]; -} - -/* * Window Size * Used with the Base register to set the address window size and location. * Must be programmed from LSB to MSB as sequence of ones followed by @@ -140,50 +112,6 @@ int kw_config_adr_windows(void) } /* - * kw_config_gpio - GPIO configuration - */ -void kw_config_gpio(u32 gpp0_oe_val, u32 gpp1_oe_val, u32 gpp0_oe, u32 gpp1_oe) -{ - struct kwgpio_registers *gpio0reg = - (struct kwgpio_registers *)KW_GPIO0_BASE; - struct kwgpio_registers *gpio1reg = - (struct kwgpio_registers *)KW_GPIO1_BASE; - - /* Init GPIOS to default values as per board requirement */ - writel(gpp0_oe_val, &gpio0reg->dout); - writel(gpp1_oe_val, &gpio1reg->dout); - writel(gpp0_oe, &gpio0reg->oe); - writel(gpp1_oe, &gpio1reg->oe); -} - -/* - * kw_config_mpp - Multi-Purpose Pins Functionality configuration - * - * Each MPP can be configured to different functionality through - * MPP control register, ref (sec 6.1 of kirkwood h/w specification) - * - * There are maximum 64 Multi-Pourpose Pins on Kirkwood - * Each MPP functionality can be configuration by a 4bit value - * of MPP control reg, the value and associated functionality depends - * upon used SoC varient - */ -int kw_config_mpp(u32 mpp0_7, u32 mpp8_15, u32 mpp16_23, u32 mpp24_31, - u32 mpp32_39, u32 mpp40_47, u32 mpp48_55) -{ - u32 *mppreg = (u32 *) KW_MPP_BASE; - - /* program mpp registers */ - writel(mpp0_7, &mppreg[0]); - writel(mpp8_15, &mppreg[1]); - writel(mpp16_23, &mppreg[2]); - writel(mpp24_31, &mppreg[3]); - writel(mpp32_39, &mppreg[4]); - writel(mpp40_47, &mppreg[5]); - writel(mpp48_55, &mppreg[6]); - return 0; -} - -/* * SYSRSTn Duration Counter Support * * Kirkwood SoC implements a hardware-based SYSRSTn duration counter. diff --git a/arch/arm/cpu/arm926ejs/kirkwood/mpp.c b/arch/arm/cpu/arm926ejs/kirkwood/mpp.c index 0ba6f09..7222504 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/mpp.c +++ b/arch/arm/cpu/arm926ejs/kirkwood/mpp.c @@ -12,7 +12,7 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/cpu.h> -#include <asm/arch/kirkwood.h> +#include <asm/arch/soc.h> #include <asm/arch/mpp.h> static u32 kirkwood_variant(void) diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index 828d10b..29b1d73 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -9,7 +9,9 @@ */ #include <common.h> +#include <dm.h> #include <errno.h> +#include <ns16550.h> #include <spl.h> #include <asm/arch/cpu.h> #include <asm/arch/hardware.h> @@ -36,6 +38,63 @@ DECLARE_GLOBAL_DATA_PTR; +#ifdef CONFIG_DM_GPIO +static const struct omap_gpio_platdata am33xx_gpio[] = { + { 0, AM33XX_GPIO0_BASE, METHOD_GPIO_24XX }, + { 1, AM33XX_GPIO1_BASE, METHOD_GPIO_24XX }, + { 2, AM33XX_GPIO2_BASE, METHOD_GPIO_24XX }, + { 3, AM33XX_GPIO3_BASE, METHOD_GPIO_24XX }, +#ifdef CONFIG_AM43XX + { 4, AM33XX_GPIO4_BASE, METHOD_GPIO_24XX }, + { 5, AM33XX_GPIO5_BASE, METHOD_GPIO_24XX }, +#endif +}; + +U_BOOT_DEVICES(am33xx_gpios) = { + { "gpio_omap", &am33xx_gpio[0] }, + { "gpio_omap", &am33xx_gpio[1] }, + { "gpio_omap", &am33xx_gpio[2] }, + { "gpio_omap", &am33xx_gpio[3] }, +#ifdef CONFIG_AM43XX + { "gpio_omap", &am33xx_gpio[4] }, + { "gpio_omap", &am33xx_gpio[5] }, +#endif +}; + +# ifndef CONFIG_OF_CONTROL +/* + * TODO(sjg@chromium.org): When we can move SPL serial to DM, we can remove + * the CONFIGs. At the same time, we should move this to the board files. + */ +static const struct ns16550_platdata am33xx_serial[] = { + { CONFIG_SYS_NS16550_COM1, 2, CONFIG_SYS_NS16550_CLK }, +# ifdef CONFIG_SYS_NS16550_COM2 + { CONFIG_SYS_NS16550_COM2, 2, CONFIG_SYS_NS16550_CLK }, +# ifdef CONFIG_SYS_NS16550_COM3 + { CONFIG_SYS_NS16550_COM3, 2, CONFIG_SYS_NS16550_CLK }, + { CONFIG_SYS_NS16550_COM4, 2, CONFIG_SYS_NS16550_CLK }, + { CONFIG_SYS_NS16550_COM5, 2, CONFIG_SYS_NS16550_CLK }, + { CONFIG_SYS_NS16550_COM6, 2, CONFIG_SYS_NS16550_CLK }, +# endif +# endif +}; + +U_BOOT_DEVICES(am33xx_uarts) = { + { "serial_omap", &am33xx_serial[0] }, +# ifdef CONFIG_SYS_NS16550_COM2 + { "serial_omap", &am33xx_serial[1] }, +# ifdef CONFIG_SYS_NS16550_COM3 + { "serial_omap", &am33xx_serial[2] }, + { "serial_omap", &am33xx_serial[3] }, + { "serial_omap", &am33xx_serial[4] }, + { "serial_omap", &am33xx_serial[5] }, +# endif +# endif +}; +# endif + +#else + static const struct gpio_bank gpio_bank_am33xx[] = { { (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX }, { (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX }, @@ -49,6 +108,8 @@ static const struct gpio_bank gpio_bank_am33xx[] = { const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx; +#endif + #if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD) int cpu_mmc_init(bd_t *bis) { diff --git a/arch/arm/cpu/armv7/armada-xp/Makefile b/arch/arm/cpu/armv7/armada-xp/Makefile new file mode 100644 index 0000000..885dcee --- /dev/null +++ b/arch/arm/cpu/armv7/armada-xp/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (C) 2014 Stefan Roese <sr@denx.de> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y = cpu.o diff --git a/arch/arm/cpu/armv7/armada-xp/cpu.c b/arch/arm/cpu/armv7/armada-xp/cpu.c new file mode 100644 index 0000000..1cf70a9 --- /dev/null +++ b/arch/arm/cpu/armv7/armada-xp/cpu.c @@ -0,0 +1,193 @@ +/* + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <netdev.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3)) +#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3)) + +static struct mbus_win windows[] = { + /* PCIE MEM address space */ + { DEFADR_PCI_MEM, 256 << 20, CPU_TARGET_PCIE13, CPU_ATTR_PCIE_MEM }, + + /* PCIE IO address space */ + { DEFADR_PCI_IO, 64 << 10, CPU_TARGET_PCIE13, CPU_ATTR_PCIE_IO }, + + /* SPI */ + { DEFADR_SPIF, 8 << 20, CPU_TARGET_DEVICEBUS_BOOTROM_SPI, + CPU_ATTR_SPIFLASH }, + + /* NOR */ + { DEFADR_BOOTROM, 8 << 20, CPU_TARGET_DEVICEBUS_BOOTROM_SPI, + CPU_ATTR_BOOTROM }, +}; + +void reset_cpu(unsigned long ignored) +{ + struct mvebu_system_registers *reg = + (struct mvebu_system_registers *)MVEBU_SYSTEM_REG_BASE; + + writel(readl(®->rstoutn_mask) | 1, ®->rstoutn_mask); + writel(readl(®->sys_soft_rst) | 1, ®->sys_soft_rst); + while (1) + ; +} + +#if defined(CONFIG_DISPLAY_CPUINFO) +int print_cpuinfo(void) +{ + u16 devid = (readl(MVEBU_REG_PCIE_DEVID) >> 16) & 0xffff; + u8 revid = readl(MVEBU_REG_PCIE_REVID) & 0xff; + + puts("SoC: "); + + switch (devid) { + case SOC_MV78460_ID: + puts("MV78460-"); + break; + default: + puts("Unknown-"); + break; + } + + switch (revid) { + case 1: + puts("A0\n"); + break; + case 2: + puts("B0\n"); + break; + default: + puts("??\n"); + break; + } + + return 0; +} +#endif /* CONFIG_DISPLAY_CPUINFO */ + +/* + * This function initialize Controller DRAM Fastpath windows. + * It takes the CS size information from the 0x1500 scratch registers + * and sets the correct windows sizes and base addresses accordingly. + * + * These values are set in the scratch registers by the Marvell + * DDR3 training code, which is executed by the BootROM before the + * main payload (U-Boot) is executed. This training code is currently + * only available in the Marvell U-Boot version. It needs to be + * ported to mainline U-Boot SPL at some point. + */ +static void update_sdram_window_sizes(void) +{ + u64 base = 0; + u32 size, temp; + int i; + + for (i = 0; i < SDRAM_MAX_CS; i++) { + size = readl((MVEBU_SDRAM_SCRATCH + (i * 8))) & SDRAM_ADDR_MASK; + if (size != 0) { + size |= ~(SDRAM_ADDR_MASK); + + /* Set Base Address */ + temp = (base & 0xFF000000ll) | ((base >> 32) & 0xF); + writel(temp, MVEBU_SDRAM_BASE + DDR_BASE_CS_OFF(i)); + + /* + * Check if out of max window size and resize + * the window + */ + temp = (readl(MVEBU_SDRAM_BASE + DDR_SIZE_CS_OFF(i)) & + ~(SDRAM_ADDR_MASK)) | 1; + temp |= (size & SDRAM_ADDR_MASK); + writel(temp, MVEBU_SDRAM_BASE + DDR_SIZE_CS_OFF(i)); + + base += ((u64)size + 1); + } else { + /* + * Disable window if not used, otherwise this + * leads to overlapping enabled windows with + * pretty strange results + */ + clrbits_le32(MVEBU_SDRAM_BASE + DDR_SIZE_CS_OFF(i), 1); + } + } +} + +#ifdef CONFIG_ARCH_CPU_INIT +int arch_cpu_init(void) +{ + /* Linux expects the internal registers to be at 0xf1000000 */ + writel(SOC_REGS_PHY_BASE, INTREG_BASE_ADDR_REG); + + /* + * We need to call mvebu_mbus_probe() before calling + * update_sdram_window_sizes() as it disables all previously + * configured mbus windows and then configures them as + * required for U-Boot. Calling update_sdram_window_sizes() + * without this configuration will not work, as the internal + * registers can't be accessed reliably because of potenial + * double mapping. + * After updating the SDRAM access windows we need to call + * mvebu_mbus_probe() again, as this now correctly configures + * the SDRAM areas that are later used by the MVEBU drivers + * (e.g. USB, NETA). + */ + + /* + * First disable all windows + */ + mvebu_mbus_probe(NULL, 0); + + /* + * Now the SDRAM access windows can be reconfigured using + * the information in the SDRAM scratch pad registers + */ + update_sdram_window_sizes(); + + /* + * Finally the mbus windows can be configured with the + * updated SDRAM sizes + */ + mvebu_mbus_probe(windows, ARRAY_SIZE(windows)); + + return 0; +} +#endif /* CONFIG_ARCH_CPU_INIT */ + +/* + * SOC specific misc init + */ +#if defined(CONFIG_ARCH_MISC_INIT) +int arch_misc_init(void) +{ + /* Nothing yet, perhaps we need something here later */ + return 0; +} +#endif /* CONFIG_ARCH_MISC_INIT */ + +#ifdef CONFIG_MVNETA +int cpu_eth_init(bd_t *bis) +{ + mvneta_initialize(bis, MVEBU_EGIGA0_BASE, 0, CONFIG_PHY_BASE_ADDR + 0); + mvneta_initialize(bis, MVEBU_EGIGA1_BASE, 1, CONFIG_PHY_BASE_ADDR + 1); + mvneta_initialize(bis, MVEBU_EGIGA2_BASE, 2, CONFIG_PHY_BASE_ADDR + 2); + mvneta_initialize(bis, MVEBU_EGIGA3_BASE, 3, CONFIG_PHY_BASE_ADDR + 3); + + return 0; +} +#endif + +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} +#endif diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 6352422..a202b03 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -9,6 +9,7 @@ #include <common.h> #include <asm/armv7.h> +#include <asm/bootm.h> #include <asm/pl310.h> #include <asm/errno.h> #include <asm/io.h> diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index 667e77f..c942fe6 100644 --- a/arch/arm/cpu/armv7/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -17,13 +17,15 @@ * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> +#include <dm.h> +#include <mmc.h> #include <spl.h> #include <asm/io.h> #include <asm/arch/sys_proto.h> #include <asm/arch/mem.h> #include <asm/cache.h> #include <asm/armv7.h> -#include <asm/arch/gpio.h> +#include <asm/gpio.h> #include <asm/omap_common.h> #include <asm/arch/mmc_host_def.h> #include <i2c.h> @@ -38,6 +40,27 @@ static void omap3_setup_aux_cr(void); static void omap3_invalidate_l2_cache_secure(void); #endif +#ifdef CONFIG_DM_GPIO +static const struct omap_gpio_platdata omap34xx_gpio[] = { + { 0, OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX }, + { 1, OMAP34XX_GPIO2_BASE, METHOD_GPIO_24XX }, + { 2, OMAP34XX_GPIO3_BASE, METHOD_GPIO_24XX }, + { 3, OMAP34XX_GPIO4_BASE, METHOD_GPIO_24XX }, + { 4, OMAP34XX_GPIO5_BASE, METHOD_GPIO_24XX }, + { 5, OMAP34XX_GPIO6_BASE, METHOD_GPIO_24XX }, +}; + +U_BOOT_DEVICES(am33xx_gpios) = { + { "gpio_omap", &omap34xx_gpio[0] }, + { "gpio_omap", &omap34xx_gpio[1] }, + { "gpio_omap", &omap34xx_gpio[2] }, + { "gpio_omap", &omap34xx_gpio[3] }, + { "gpio_omap", &omap34xx_gpio[4] }, + { "gpio_omap", &omap34xx_gpio[5] }, +}; + +#else + static const struct gpio_bank gpio_bank_34xx[6] = { { (void *)OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX }, { (void *)OMAP34XX_GPIO2_BASE, METHOD_GPIO_24XX }, @@ -49,6 +72,8 @@ static const struct gpio_bank gpio_bank_34xx[6] = { const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx; +#endif + #ifdef CONFIG_SPL_BUILD /* * We use static variables because global data is not ready yet. @@ -266,7 +291,7 @@ int __weak misc_init_r(void) * Routine: wait_for_command_complete * Description: Wait for posting to finish on watchdog *****************************************************************************/ -void wait_for_command_complete(struct watchdog *wd_base) +static void wait_for_command_complete(struct watchdog *wd_base) { int pending = 1; do { diff --git a/arch/arm/cpu/armv7/omap3/emif4.c b/arch/arm/cpu/armv7/omap3/emif4.c index 6c7330a..a2aadc9 100644 --- a/arch/arm/cpu/armv7/omap3/emif4.c +++ b/arch/arm/cpu/armv7/omap3/emif4.c @@ -61,7 +61,7 @@ u32 get_sdr_cs_offset(u32 cs) * - Init the emif4 module for DDR access * - Early init routines, called from flash or SRAM. */ -void do_emif4_init(void) +static void do_emif4_init(void) { unsigned int regval; /* Set the DDR PHY parameters in PHY ctrl registers */ diff --git a/arch/arm/cpu/armv7/omap3/sys_info.c b/arch/arm/cpu/armv7/omap3/sys_info.c index bef5f05..bbb65bb 100644 --- a/arch/arm/cpu/armv7/omap3/sys_info.c +++ b/arch/arm/cpu/armv7/omap3/sys_info.c @@ -16,6 +16,8 @@ #include <asm/io.h> #include <asm/arch/mem.h> /* get mem tables */ #include <asm/arch/sys_proto.h> +#include <asm/bootm.h> + #include <i2c.h> #include <linux/compiler.h> @@ -202,7 +204,7 @@ u32 __weak get_board_rev(void) /******************************************************** * get_base(); get upper addr of current execution *******************************************************/ -u32 get_base(void) +static u32 get_base(void) { u32 val; diff --git a/arch/arm/cpu/armv7/socfpga/misc.c b/arch/arm/cpu/armv7/socfpga/misc.c index 0eab264..8c3e5f7 100644 --- a/arch/arm/cpu/armv7/socfpga/misc.c +++ b/arch/arm/cpu/armv7/socfpga/misc.c @@ -176,7 +176,7 @@ static void socfpga_nic301_slave_ns(void) static uint32_t iswgrp_handoff[8]; -int misc_init_r(void) +int arch_early_init_r(void) { int i; for (i = 0; i < 8; i++) /* Cache initial SW setting regs */ diff --git a/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds b/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds index db9bdad..569fa41 100644 --- a/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds +++ b/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds @@ -42,13 +42,4 @@ SECTIONS . = ALIGN(4); __bss_end = .; } >.sdram - - . = ALIGN(8); - __malloc_start = .; - . = . + CONFIG_SPL_MALLOC_SIZE; - __malloc_end = .; - - . = . + CONFIG_SPL_STACK_SIZE; - . = ALIGN(8); - __stack_start = .; } diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile index e9721b2..24f1dae 100644 --- a/arch/arm/cpu/armv7/sunxi/Makefile +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -11,9 +11,13 @@ obj-y += timer.o obj-y += board.o obj-y += clock.o obj-y += pinmux.o +obj-$(CONFIG_SUN6I) += prcm.o +obj-$(CONFIG_SUN8I) += prcm.o obj-$(CONFIG_SUN4I) += clock_sun4i.o obj-$(CONFIG_SUN5I) += clock_sun4i.o +obj-$(CONFIG_SUN6I) += clock_sun6i.o obj-$(CONFIG_SUN7I) += clock_sun4i.o +obj-$(CONFIG_SUN8I) += clock_sun6i.o ifndef CONFIG_SPL_BUILD obj-y += cpu_info.o diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index f2cedbb..06eb676 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -50,18 +50,35 @@ u32 spl_boot_mode(void) int gpio_init(void) { -#if CONFIG_CONS_INDEX == 1 && (defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I)) +#if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F) +#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I) + /* disable GPB22,23 as uart0 tx,rx to avoid conflict */ + sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUNXI_GPIO_INPUT); + sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUNXI_GPIO_INPUT); +#endif + sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF2_UART0_TX); + sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF4_UART0_RX); + sunxi_gpio_set_pull(SUNXI_GPF(4), 1); +#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I)) sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX); sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX); - sunxi_gpio_set_pull(SUNXI_GPB(23), 1); + sunxi_gpio_set_pull(SUNXI_GPB(23), SUNXI_GPIO_PULL_UP); #elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN5I) sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN5I_GPB19_UART0_TX); sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN5I_GPB20_UART0_RX); - sunxi_gpio_set_pull(SUNXI_GPB(20), 1); + sunxi_gpio_set_pull(SUNXI_GPB(20), SUNXI_GPIO_PULL_UP); +#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN6I) + sunxi_gpio_set_cfgpin(SUNXI_GPH(20), SUN6I_GPH20_UART0_TX); + sunxi_gpio_set_cfgpin(SUNXI_GPH(21), SUN6I_GPH21_UART0_RX); + sunxi_gpio_set_pull(SUNXI_GPH(21), SUNXI_GPIO_PULL_UP); #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_SUN5I) sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG3_UART1_TX); sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG4_UART1_RX); - sunxi_gpio_set_pull(SUNXI_GPG(4), 1); + sunxi_gpio_set_pull(SUNXI_GPG(4), SUNXI_GPIO_PULL_UP); +#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_SUN8I) + sunxi_gpio_set_cfgpin(SUNXI_GPL(2), SUN8I_GPL2_R_UART_TX); + sunxi_gpio_set_cfgpin(SUNXI_GPL(3), SUN8I_GPL3_R_UART_RX); + sunxi_gpio_set_pull(SUNXI_GPL(3), SUNXI_GPIO_PULL_UP); #else #error Unsupported console port number. Please fix pin mux settings in board.c #endif @@ -71,6 +88,7 @@ int gpio_init(void) void reset_cpu(ulong addr) { +#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) static const struct sunxi_wdog *wdog = &((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog; @@ -82,12 +100,22 @@ void reset_cpu(ulong addr) /* sun5i sometimes gets stuck without this */ writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode); } +#else /* CONFIG_SUN6I || CONFIG_SUN8I || .. */ + static const struct sunxi_wdog *wdog = + ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog; + + /* Set the watchdog for its shortest interval (.5s) and wait */ + writel(WDT_CFG_RESET, &wdog->cfg); + writel(WDT_MODE_EN, &wdog->mode); + writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl); +#endif } /* do some early init */ void s_init(void) { -#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || defined CONFIG_SUN6I) +#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || \ + defined CONFIG_SUN6I || defined CONFIG_SUN8I) /* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */ asm volatile( "mrc p15, 0, r0, c1, c0, 1\n" diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c index ecbdb01..4a0d64f 100644 --- a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c +++ b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c @@ -180,6 +180,17 @@ void clock_set_pll1(unsigned int hz) } #endif +unsigned int clock_get_pll5p(void) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + uint32_t rval = readl(&ccm->pll5_cfg); + int n = ((rval & CCM_PLL5_CTRL_N_MASK) >> CCM_PLL5_CTRL_N_SHIFT); + int k = ((rval & CCM_PLL5_CTRL_K_MASK) >> CCM_PLL5_CTRL_K_SHIFT) + 1; + int p = ((rval & CCM_PLL5_CTRL_P_MASK) >> CCM_PLL5_CTRL_P_SHIFT); + return (24000000 * n * k) >> p; +} + unsigned int clock_get_pll6(void) { struct sunxi_ccm_reg *const ccm = diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c new file mode 100644 index 0000000..1eae976 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c @@ -0,0 +1,76 @@ +/* + * sun6i specific clock code + * + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/prcm.h> +#include <asm/arch/sys_proto.h> + +void clock_init_uart(void) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + +#if CONFIG_CONS_INDEX < 5 + /* uart clock source is apb2 */ + writel(APB2_CLK_SRC_OSC24M| + APB2_CLK_RATE_N_1| + APB2_CLK_RATE_M(1), + &ccm->apb2_div); + + /* open the clock for uart */ + setbits_le32(&ccm->apb2_gate, + CLK_GATE_OPEN << (APB2_GATE_UART_SHIFT + + CONFIG_CONS_INDEX - 1)); + + /* deassert uart reset */ + setbits_le32(&ccm->apb2_reset_cfg, + 1 << (APB2_RESET_UART_SHIFT + + CONFIG_CONS_INDEX - 1)); +#else + /* enable R_PIO and R_UART clocks, and de-assert resets */ + prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_UART); +#endif + + /* Dup with clock_init_safe(), drop once sun6i SPL support lands */ + writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg); +} + +int clock_twi_onoff(int port, int state) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + if (port > 3) + return -1; + + /* set the apb clock gate for twi */ + if (state) + setbits_le32(&ccm->apb2_gate, + CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port)); + else + clrbits_le32(&ccm->apb2_gate, + CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port)); + + return 0; +} + +unsigned int clock_get_pll6(void) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + uint32_t rval = readl(&ccm->pll6_cfg); + int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT) + 1; + int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1; + return 24000000 * n * k / 2; +} diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c index 5cf35ac..4f2a09c 100644 --- a/arch/arm/cpu/armv7/sunxi/cpu_info.c +++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c @@ -23,8 +23,12 @@ int print_cpuinfo(void) case 7: puts("CPU: Allwinner A10s (SUN5I)\n"); break; default: puts("CPU: Allwinner A1X (SUN5I)\n"); } +#elif defined CONFIG_SUN6I + puts("CPU: Allwinner A31 (SUN6I)\n"); #elif defined CONFIG_SUN7I puts("CPU: Allwinner A20 (SUN7I)\n"); +#elif defined CONFIG_SUN8I + puts("CPU: Allwinner A23 (SUN8I)\n"); #else #warning Please update cpu_info.c with correct CPU information puts("CPU: SUNXI Family\n"); diff --git a/arch/arm/cpu/armv7/sunxi/dram.c b/arch/arm/cpu/armv7/sunxi/dram.c index 584f742..3cf3cbf 100644 --- a/arch/arm/cpu/armv7/sunxi/dram.c +++ b/arch/arm/cpu/armv7/sunxi/dram.c @@ -252,15 +252,9 @@ static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk) { u32 reg_val; struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - - /* PLL5P and PLL6 are the potential clock sources for MBUS */ - u32 pll6x_div, pll5p_div; - u32 pll6x_clk = clock_get_pll6() / 1000000; - u32 pll5p_clk = clk / 24 * 48; + u32 pll5p_clk, pll6x_clk; + u32 pll5p_div, pll6x_div; u32 pll5p_rate, pll6x_rate; -#ifdef CONFIG_SUN7I - pll6x_clk *= 2; /* sun7i uses PLL6*2, sun5i uses just PLL6 */ -#endif /* setup DRAM PLL */ reg_val = readl(&ccm->pll5_cfg); @@ -268,33 +262,32 @@ static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk) reg_val &= ~CCM_PLL5_CTRL_K_MASK; /* set K to 0 (x1) */ reg_val &= ~CCM_PLL5_CTRL_N_MASK; /* set N to 0 (x0) */ reg_val &= ~CCM_PLL5_CTRL_P_MASK; /* set P to 0 (x1) */ +#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT + /* Old kernels are hardcoded to P=1 (divide by 2) */ + reg_val |= CCM_PLL5_CTRL_P(1); +#endif if (clk >= 540 && clk < 552) { - /* dram = 540MHz, pll5p = 1080MHz */ - pll5p_clk = 1080; + /* dram = 540MHz */ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3)); reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(15)); } else if (clk >= 512 && clk < 528) { - /* dram = 512MHz, pll5p = 1536MHz */ - pll5p_clk = 1536; + /* dram = 512MHz */ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3)); reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(4)); reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(16)); } else if (clk >= 496 && clk < 504) { - /* dram = 496MHz, pll5p = 1488MHz */ - pll5p_clk = 1488; + /* dram = 496MHz */ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3)); reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2)); reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(31)); } else if (clk >= 468 && clk < 480) { - /* dram = 468MHz, pll5p = 936MHz */ - pll5p_clk = 936; + /* dram = 468MHz */ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3)); reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(13)); } else if (clk >= 396 && clk < 408) { - /* dram = 396MHz, pll5p = 792MHz */ - pll5p_clk = 792; + /* dram = 396MHz */ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3)); reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(11)); @@ -322,6 +315,13 @@ static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk) /* setup MBUS clock */ if (!mbus_clk) mbus_clk = 300; + + /* PLL5P and PLL6 are the potential clock sources for MBUS */ + pll6x_clk = clock_get_pll6() / 1000000; +#ifdef CONFIG_SUN7I + pll6x_clk *= 2; /* sun7i uses PLL6*2, sun5i uses just PLL6 */ +#endif + pll5p_clk = clock_get_pll5p() / 1000000; pll6x_div = DIV_ROUND_UP(pll6x_clk, mbus_clk); pll5p_div = DIV_ROUND_UP(pll5p_clk, mbus_clk); pll6x_rate = pll6x_clk / pll6x_div; diff --git a/arch/arm/cpu/armv7/sunxi/prcm.c b/arch/arm/cpu/armv7/sunxi/prcm.c new file mode 100644 index 0000000..19b4938 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/prcm.c @@ -0,0 +1,35 @@ +/* + * Sunxi A31 Power Management Unit + * + * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl> + * http://linux-sunxi.org + * + * Based on sun6i sources and earlier U-Boot Allwinner A10 SPL work + * + * (C) Copyright 2006-2013 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Berg Xing <bergxing@allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/prcm.h> +#include <asm/arch/sys_proto.h> + +/* APB0 clock gate and reset bit offsets are the same. */ +void prcm_apb0_enable(u32 flags) +{ + struct sunxi_prcm_reg *prcm = + (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE; + + /* open the clock for module */ + setbits_le32(&prcm->apb0_gate, flags); + + /* deassert reset for module */ + setbits_le32(&prcm->apb0_reset, flags); +} diff --git a/arch/arm/cpu/armv7/tegra-common/Kconfig b/arch/arm/cpu/armv7/tegra-common/Kconfig index bcae2d6..3ea6d76 100644 --- a/arch/arm/cpu/armv7/tegra-common/Kconfig +++ b/arch/arm/cpu/armv7/tegra-common/Kconfig @@ -17,6 +17,9 @@ config TEGRA124 endchoice +config USE_PRIVATE_LIBGCC + default y if SPL_BUILD + config SYS_CPU default "arm720t" if SPL_BUILD default "armv7" if !SPL_BUILD diff --git a/arch/arm/cpu/armv7/tegra20/display.c b/arch/arm/cpu/armv7/tegra20/display.c index fd77f3f..d98cec9 100644 --- a/arch/arm/cpu/armv7/tegra20/display.c +++ b/arch/arm/cpu/armv7/tegra20/display.c @@ -194,7 +194,8 @@ static void rgb_enable(struct dc_com_reg *com) writel(rgb_sel_tab[i], &com->pin_output_sel[i]); } -int setup_window(struct disp_ctl_win *win, struct fdt_disp_config *config) +static int setup_window(struct disp_ctl_win *win, + struct fdt_disp_config *config) { win->x = 0; win->y = 0; diff --git a/arch/arm/cpu/armv7/tegra30/Kconfig b/arch/arm/cpu/armv7/tegra30/Kconfig index 54aec4e..3abdc7b 100644 --- a/arch/arm/cpu/armv7/tegra30/Kconfig +++ b/arch/arm/cpu/armv7/tegra30/Kconfig @@ -3,6 +3,9 @@ if TEGRA30 choice prompt "Tegra30 board select" +config TARGET_APALIS_T30 + bool "Toradex Apalis T30 board" + config TARGET_BEAVER bool "NVIDIA Tegra30 Beaver evaluation board" @@ -20,6 +23,7 @@ endchoice config SYS_SOC default "tegra30" +source "board/toradex/apalis_t30/Kconfig" source "board/nvidia/beaver/Kconfig" source "board/nvidia/cardhu/Kconfig" source "board/toradex/colibri_t30/Kconfig" diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile index b385e19..781b511 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile @@ -3,6 +3,7 @@ # obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o +obj-y += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o bcu_init.o \ sbc_init.o sg_init.o pll_init.o clkrst_init.o pinctrl.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c new file mode 100644 index 0000000..0047223 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/platdevice.h> + +#define UART_MASTER_CLK 36864000 + +SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) +SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) +SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) +SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile index 712afd1..e11f4f6 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile @@ -3,6 +3,7 @@ # obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o +obj-y += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o sbc_init.o \ sg_init.o pll_init.o clkrst_init.o pinctrl.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c new file mode 100644 index 0000000..6da921e --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/platdevice.h> + +#define UART_MASTER_CLK 73728000 + +SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) +SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) +SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) +SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile index b385e19..781b511 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile @@ -3,6 +3,7 @@ # obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o +obj-y += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o bcu_init.o \ sbc_init.o sg_init.o pll_init.o clkrst_init.o pinctrl.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c new file mode 100644 index 0000000..59d054a --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/platdevice.h> + +#define UART_MASTER_CLK 80000000 + +SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) +SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) +SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) +SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) diff --git a/arch/arm/cpu/tegra-common/board.c b/arch/arm/cpu/tegra-common/board.c index 433da09..b6a84a5 100644 --- a/arch/arm/cpu/tegra-common/board.c +++ b/arch/arm/cpu/tegra-common/board.c @@ -9,6 +9,7 @@ #include <asm/io.h> #include <asm/arch/clock.h> #include <asm/arch/funcmux.h> +#include <asm/arch/mc.h> #include <asm/arch/tegra.h> #include <asm/arch-tegra/board.h> #include <asm/arch-tegra/pmc.h> @@ -27,55 +28,6 @@ enum { UART_COUNT = 5, }; -#if defined(CONFIG_TEGRA20) || defined(CONFIG_TEGRA30) || \ - defined(CONFIG_TEGRA114) -/* - * Boot ROM initializes the odmdata in APBDEV_PMC_SCRATCH20_0, - * so we are using this value to identify memory size. - */ -unsigned int query_sdram_size(void) -{ - struct pmc_ctlr *const pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; - u32 reg; - - reg = readl(&pmc->pmc_scratch20); - debug("pmc->pmc_scratch20 (ODMData) = 0x%08x\n", reg); - -#if defined(CONFIG_TEGRA20) - /* bits 30:28 in OdmData are used for RAM size on T20 */ - reg &= 0x70000000; - - switch ((reg) >> 28) { - case 1: - return 0x10000000; /* 256 MB */ - case 0: - case 2: - default: - return 0x20000000; /* 512 MB */ - case 3: - return 0x40000000; /* 1GB */ - } -#else /* Tegra30/Tegra114 */ - /* bits 31:28 in OdmData are used for RAM size on T30 */ - switch ((reg) >> 28) { - case 0: - case 1: - default: - return 0x10000000; /* 256 MB */ - case 2: - return 0x20000000; /* 512 MB */ - case 3: - return 0x30000000; /* 768 MB */ - case 4: - return 0x40000000; /* 1GB */ - case 8: - return 0x7ff00000; /* 2GB - 1MB */ - } -#endif -} -#else -#include <asm/arch/mc.h> - /* Read the RAM size directly from the memory controller */ unsigned int query_sdram_size(void) { @@ -83,12 +35,22 @@ unsigned int query_sdram_size(void) u32 size_mb; size_mb = readl(&mc->mc_emem_cfg); +#if defined(CONFIG_TEGRA20) + debug("mc->mc_emem_cfg (MEM_SIZE_KB) = 0x%08x\n", size_mb); + size_mb = get_ram_size((void *)PHYS_SDRAM_1, size_mb * 1024); +#else debug("mc->mc_emem_cfg (MEM_SIZE_MB) = 0x%08x\n", size_mb); + size_mb = get_ram_size((void *)PHYS_SDRAM_1, size_mb * 1024 * 1024); +#endif - return size_mb * 1024 * 1024; -} +#if defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA114) + /* External memory limited to 2047 MB due to IROM/HI-VEC */ + if (size_mb == SZ_2G) size_mb -= SZ_1M; #endif + return size_mb; +} + int dram_init(void) { /* We do not initialise DRAM here. We just query the size */ diff --git a/arch/arm/cpu/tegra-common/sys_info.c b/arch/arm/cpu/tegra-common/sys_info.c index de20325..5933c35 100644 --- a/arch/arm/cpu/tegra-common/sys_info.c +++ b/arch/arm/cpu/tegra-common/sys_info.c @@ -8,7 +8,7 @@ #include <common.h> #include <linux/ctype.h> -void upstring(char *s) +static void upstring(char *s) { while (*s) { *s = toupper(*s); diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index c37580e..c346063 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -22,6 +22,7 @@ dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra20-ventana.dtb \ tegra20-whistler.dtb \ tegra20-colibri_t20_iris.dtb \ + tegra30-apalis.dtb \ tegra30-beaver.dtb \ tegra30-cardhu.dtb \ tegra30-colibri.dtb \ diff --git a/arch/arm/dts/am335x-bone-common.dtsi b/arch/arm/dts/am335x-bone-common.dtsi index 2f66ded..e70b4d1 100644 --- a/arch/arm/dts/am335x-bone-common.dtsi +++ b/arch/arm/dts/am335x-bone-common.dtsi @@ -10,6 +10,10 @@ model = "TI AM335x BeagleBone"; compatible = "ti,am335x-bone", "ti,am33xx"; + chosen { + stdout-path = &uart0; + }; + cpus { cpu@0 { cpu0-supply = <&dcdc2_reg>; diff --git a/arch/arm/dts/dt-bindings/gpio/gpio.h b/arch/arm/dts/dt-bindings/gpio/gpio.h deleted file mode 100644 index e6b1e0a..0000000 --- a/arch/arm/dts/dt-bindings/gpio/gpio.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * This header provides constants for most GPIO bindings. - * - * Most GPIO bindings include a flags cell as part of the GPIO specifier. - * In most cases, the format of the flags cell uses the standard values - * defined in this header. - */ - -#ifndef _DT_BINDINGS_GPIO_GPIO_H -#define _DT_BINDINGS_GPIO_GPIO_H - -#define GPIO_ACTIVE_HIGH 0 -#define GPIO_ACTIVE_LOW 1 - -#endif diff --git a/arch/arm/dts/dt-bindings/pinctrl/am33xx.h b/arch/arm/dts/dt-bindings/pinctrl/am33xx.h deleted file mode 100644 index 2fbc804..0000000 --- a/arch/arm/dts/dt-bindings/pinctrl/am33xx.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * This header provides constants specific to AM33XX pinctrl bindings. - */ - -#ifndef _DT_BINDINGS_PINCTRL_AM33XX_H -#define _DT_BINDINGS_PINCTRL_AM33XX_H - -#include <dt-bindings/pinctrl/omap.h> - -/* am33xx specific mux bit defines */ -#undef PULL_ENA -#undef INPUT_EN - -#define PULL_DISABLE (1 << 3) -#define INPUT_EN (1 << 5) -#define SLEWCTRL_FAST (1 << 6) - -/* update macro depending on INPUT_EN and PULL_ENA */ -#undef PIN_OUTPUT -#undef PIN_OUTPUT_PULLUP -#undef PIN_OUTPUT_PULLDOWN -#undef PIN_INPUT -#undef PIN_INPUT_PULLUP -#undef PIN_INPUT_PULLDOWN - -#define PIN_OUTPUT (PULL_DISABLE) -#define PIN_OUTPUT_PULLUP (PULL_UP) -#define PIN_OUTPUT_PULLDOWN 0 -#define PIN_INPUT (INPUT_EN | PULL_DISABLE) -#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP) -#define PIN_INPUT_PULLDOWN (INPUT_EN) - -/* undef non-existing modes */ -#undef PIN_OFF_NONE -#undef PIN_OFF_OUTPUT_HIGH -#undef PIN_OFF_OUTPUT_LOW -#undef PIN_OFF_INPUT_PULLUP -#undef PIN_OFF_INPUT_PULLDOWN -#undef PIN_OFF_WAKEUPENABLE - -#endif - diff --git a/arch/arm/dts/dt-bindings/pinctrl/omap.h b/arch/arm/dts/dt-bindings/pinctrl/omap.h deleted file mode 100644 index edbd250..0000000 --- a/arch/arm/dts/dt-bindings/pinctrl/omap.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * This header provides constants for OMAP pinctrl bindings. - * - * Copyright (C) 2009 Nokia - * Copyright (C) 2009-2010 Texas Instruments - */ - -#ifndef _DT_BINDINGS_PINCTRL_OMAP_H -#define _DT_BINDINGS_PINCTRL_OMAP_H - -/* 34xx mux mode options for each pin. See TRM for options */ -#define MUX_MODE0 0 -#define MUX_MODE1 1 -#define MUX_MODE2 2 -#define MUX_MODE3 3 -#define MUX_MODE4 4 -#define MUX_MODE5 5 -#define MUX_MODE6 6 -#define MUX_MODE7 7 - -/* 24xx/34xx mux bit defines */ -#define PULL_ENA (1 << 3) -#define PULL_UP (1 << 4) -#define ALTELECTRICALSEL (1 << 5) - -/* 34xx specific mux bit defines */ -#define INPUT_EN (1 << 8) -#define OFF_EN (1 << 9) -#define OFFOUT_EN (1 << 10) -#define OFFOUT_VAL (1 << 11) -#define OFF_PULL_EN (1 << 12) -#define OFF_PULL_UP (1 << 13) -#define WAKEUP_EN (1 << 14) - -/* 44xx specific mux bit defines */ -#define WAKEUP_EVENT (1 << 15) - -/* Active pin states */ -#define PIN_OUTPUT 0 -#define PIN_OUTPUT_PULLUP (PIN_OUTPUT | PULL_ENA | PULL_UP) -#define PIN_OUTPUT_PULLDOWN (PIN_OUTPUT | PULL_ENA) -#define PIN_INPUT INPUT_EN -#define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP) -#define PIN_INPUT_PULLDOWN (PULL_ENA | INPUT_EN) - -/* Off mode states */ -#define PIN_OFF_NONE 0 -#define PIN_OFF_OUTPUT_HIGH (OFF_EN | OFFOUT_EN | OFFOUT_VAL) -#define PIN_OFF_OUTPUT_LOW (OFF_EN | OFFOUT_EN) -#define PIN_OFF_INPUT_PULLUP (OFF_EN | OFF_PULL_EN | OFF_PULL_UP) -#define PIN_OFF_INPUT_PULLDOWN (OFF_EN | OFF_PULL_EN) -#define PIN_OFF_WAKEUPENABLE WAKEUP_EN - -#endif - diff --git a/arch/arm/dts/tegra30-apalis.dts b/arch/arm/dts/tegra30-apalis.dts new file mode 100644 index 0000000..5bad3e7 --- /dev/null +++ b/arch/arm/dts/tegra30-apalis.dts @@ -0,0 +1,304 @@ +/dts-v1/; + +#include "tegra30.dtsi" + +/ { + model = "Toradex Apalis T30"; + compatible = "toradex,apalis_t30", "nvidia,tegra30"; + + chosen { + stdout-path = &uarta; + }; + + aliases { + i2c0 = "/i2c@7000d000"; + i2c1 = "/i2c@7000c000"; + i2c2 = "/i2c@7000c500"; + i2c3 = "/i2c@7000c700"; + sdhci0 = "/sdhci@78000600"; + sdhci1 = "/sdhci@78000400"; + sdhci2 = "/sdhci@78000000"; + usb0 = "/usb@7d000000"; + usb1 = "/usb@7d004000"; + usb2 = "/usb@7d008000"; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + pcie-controller@00003000 { + status = "okay"; + avdd-pexa-supply = <&vdd2_reg>; + vdd-pexa-supply = <&vdd2_reg>; + avdd-pexb-supply = <&vdd2_reg>; + vdd-pexb-supply = <&vdd2_reg>; + avdd-pex-pll-supply = <&vdd2_reg>; + avdd-plle-supply = <&ldo6_reg>; + vddio-pex-ctl-supply = <&sys_3v3_reg>; + hvdd-pex-supply = <&sys_3v3_reg>; + + pci@1,0 { + nvidia,num-lanes = <4>; + }; + + pci@2,0 { + nvidia,num-lanes = <1>; + }; + + pci@3,0 { + status = "okay"; + nvidia,num-lanes = <1>; + }; + }; + + /* + * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier + * board) + */ + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* GEN2_I2C: unused */ + + /* + * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on + * carrier board) + */ + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */ + i2c@7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and + * touch screen controller + */ + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + + pmic: tps65911@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <&sys_3v3_reg>; + vcc2-supply = <&sys_3v3_reg>; + vcc3-supply = <&vio_reg>; + vcc4-supply = <&sys_3v3_reg>; + vcc5-supply = <&sys_3v3_reg>; + vcc6-supply = <&vio_reg>; + vcc7-supply = <&charge_pump_5v0_reg>; + vccio-supply = <&sys_3v3_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + /* SW1: +V1.35_VDDIO_DDR */ + vdd1_reg: vdd1 { + regulator-name = "vddio_ddr_1v35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + /* SW2: +V1.05 */ + vdd2_reg: vdd2 { + regulator-name = + "vdd_pexa,vdd_pexb,vdd_sata"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + /* SW CTRL: +V1.0_VDD_CPU */ + vddctrl_reg: vddctrl { + regulator-name = "vdd_cpu,vdd_sys"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + }; + + /* SWIO: +V1.8 */ + vio_reg: vio { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + /* LDO1: unused */ + + /* + * EN_+V3.3 switching via FET: + * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN + * see also v3_3 fixed supply + */ + ldo2_reg: ldo2 { + regulator-name = "en_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* +V1.2_CSI */ + ldo3_reg: ldo3 { + regulator-name = + "avdd_dsi_csi,pwrdet_mipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + /* +V1.2_VDD_RTC */ + ldo4_reg: ldo4 { + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + /* + * +V2.8_AVDD_VDAC: + * only required for analog RGB + */ + ldo5_reg: ldo5 { + regulator-name = "avdd_vdac"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + /* + * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V + * but LDO6 can't set voltage in 50mV + * granularity + */ + ldo6_reg: ldo6 { + regulator-name = "avdd_plle"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + /* +V1.2_AVDD_PLL */ + ldo7_reg: ldo7 { + regulator-name = "avdd_pll"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + /* +V1.0_VDD_DDR_HS */ + ldo8_reg: ldo8 { + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + }; + }; + }; + + /* SPI1: Apalis SPI1 */ + spi@7000d400 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + /* SPI4: CAN2 */ + spi@7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + /* SPI5: Apalis SPI2 */ + spi@7000dc00 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + /* SPI6: CAN1 */ + spi@7000de00 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + sdhci@78000000 { + status = "okay"; + bus-width = <4>; + cd-gpios = <&gpio 229 1>; /* PCC5, SD1_CD# */ + }; + + sdhci@78000400 { + status = "okay"; + bus-width = <8>; + cd-gpios = <&gpio 171 1>; /* PV3, MMC1_CD# */ + }; + + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */ + usb@7d000000 { + status = "okay"; + dr_mode = "peripheral"; + nvidia,vbus-gpio = <&gpio 157 0>; /* PT5, USBO1_EN */ + }; + + /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */ + usb@7d004000 { + status = "okay"; + nvidia,vbus-gpio = <&gpio 233 0>; /* PDD1, USBH_EN */ + phy_type = "utmi"; + }; + + /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */ + usb@7d008000 { + status = "okay"; + nvidia,vbus-gpio = <&gpio 233 0>; /* PDD1, USBH_EN */ + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + sys_3v3_reg: regulator@100 { + compatible = "regulator-fixed"; + reg = <100>; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + charge_pump_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; +}; diff --git a/arch/arm/dts/tegra30-colibri.dts b/arch/arm/dts/tegra30-colibri.dts index df79c26..572520a 100644 --- a/arch/arm/dts/tegra30-colibri.dts +++ b/arch/arm/dts/tegra30-colibri.dts @@ -6,6 +6,10 @@ model = "Toradex Colibri T30"; compatible = "toradex,colibri_t30", "nvidia,tegra30"; + chosen { + stdout-path = &uarta; + }; + aliases { i2c0 = "/i2c@7000d000"; i2c1 = "/i2c@7000c000"; diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c index ed826a0..09fc227 100644 --- a/arch/arm/imx-common/cpu.c +++ b/arch/arm/imx-common/cpu.c @@ -7,7 +7,9 @@ * SPDX-License-Identifier: GPL-2.0+ */ +#include <bootm.h> #include <common.h> +#include <netdev.h> #include <asm/errno.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> diff --git a/arch/arm/imx-common/misc.c b/arch/arm/imx-common/misc.c index dbecf4e..12256a3 100644 --- a/arch/arm/imx-common/misc.c +++ b/arch/arm/imx-common/misc.c @@ -5,6 +5,7 @@ */ #include <common.h> +#include <asm/arch/sys_proto.h> #include <asm/errno.h> #include <asm/io.h> #include <asm/imx-common/regs-common.h> diff --git a/arch/arm/include/asm/arch-armada-xp/config.h b/arch/arm/include/asm/arch-armada-xp/config.h new file mode 100644 index 0000000..00ee775 --- /dev/null +++ b/arch/arm/include/asm/arch-armada-xp/config.h @@ -0,0 +1,82 @@ +/* + * (C) Copyright 2011 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Lei Wen <leiwen@marvell.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * This file should be included in board config header file. + * + * It supports common definitions for Armada XP platforms + */ + +#ifndef _ARMADA_XP_CONFIG_H +#define _ARMADA_XP_CONFIG_H + +#include <asm/arch/soc.h> + +#define MV88F78X60 /* for the DDR training bin_hdr code */ + +#define CONFIG_SYS_CACHELINE_SIZE 32 + +/* + * By default kwbimage.cfg from board specific folder is used + * If for some board, different configuration file need to be used, + * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file + */ +#ifndef CONFIG_SYS_KWD_CONFIG +#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg +#endif /* CONFIG_SYS_KWD_CONFIG */ + +/* Add target to build it automatically upon "make" */ +#define CONFIG_BUILD_TARGET "u-boot.kwb" + +/* end of 16M scrubbed by training in bootrom */ +#define CONFIG_SYS_INIT_SP_ADDR 0x00FF0000 +#define CONFIG_NR_DRAM_BANKS_MAX 2 + +#define MV_UART_CONSOLE_BASE MVEBU_UART0_BASE + +/* + * SPI Flash configuration + */ +#ifdef CONFIG_CMD_SF +#define CONFIG_HARD_SPI 1 +#define CONFIG_KIRKWOOD_SPI 1 +#ifndef CONFIG_ENV_SPI_BUS +# define CONFIG_ENV_SPI_BUS 0 +#endif +#ifndef CONFIG_ENV_SPI_CS +# define CONFIG_ENV_SPI_CS 0 +#endif +#ifndef CONFIG_ENV_SPI_MAX_HZ +# define CONFIG_ENV_SPI_MAX_HZ 50000000 +#endif +#endif + +/* + * Ethernet Driver configuration + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_MII /* expose smi ove miiphy interface */ +#define CONFIG_MVNETA /* Enable Marvell Gbe Controller Driver */ +#define CONFIG_PHYLIB +#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ +#define CONFIG_PHY_GIGE /* GbE speed/duplex detect */ +#endif /* CONFIG_CMD_NET */ + +/* + * I2C related stuff + */ +#ifdef CONFIG_CMD_I2C +#ifndef CONFIG_SYS_I2C_SOFT +#define CONFIG_I2C_MVTWSI +#endif +#define CONFIG_SYS_I2C_SLAVE 0x0 +#define CONFIG_SYS_I2C_SPEED 100000 +#endif + +#endif /* _ARMADA_XP_CONFIG_H */ diff --git a/arch/arm/include/asm/arch-armada-xp/cpu.h b/arch/arm/include/asm/arch-armada-xp/cpu.h new file mode 100644 index 0000000..6b60c21 --- /dev/null +++ b/arch/arm/include/asm/arch-armada-xp/cpu.h @@ -0,0 +1,107 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ARMADA_XP_CPU_H +#define _ARMADA_XP_CPU_H + +#include <asm/system.h> + +#ifndef __ASSEMBLY__ + +#define MVEBU_REG_PCIE_DEVID (MVEBU_REG_PCIE_BASE + 0x00) +#define MVEBU_REG_PCIE_REVID (MVEBU_REG_PCIE_BASE + 0x08) + +enum memory_bank { + BANK0, + BANK1, + BANK2, + BANK3 +}; + +enum cpu_winen { + CPU_WIN_DISABLE, + CPU_WIN_ENABLE +}; + +enum cpu_target { + CPU_TARGET_DRAM = 0x0, + CPU_TARGET_DEVICEBUS_BOOTROM_SPI = 0x1, + CPU_TARGET_ETH23 = 0x3, + CPU_TARGET_PCIE02 = 0x4, + CPU_TARGET_ETH01 = 0x7, + CPU_TARGET_PCIE13 = 0x8, + CPU_TARGET_SASRAM = 0x9, + CPU_TARGET_NAND = 0xd, +}; + +enum cpu_attrib { + CPU_ATTR_SASRAM = 0x01, + CPU_ATTR_DRAM_CS0 = 0x0e, + CPU_ATTR_DRAM_CS1 = 0x0d, + CPU_ATTR_DRAM_CS2 = 0x0b, + CPU_ATTR_DRAM_CS3 = 0x07, + CPU_ATTR_NANDFLASH = 0x2f, + CPU_ATTR_SPIFLASH = 0x1e, + CPU_ATTR_BOOTROM = 0x1d, + CPU_ATTR_PCIE_IO = 0xe0, + CPU_ATTR_PCIE_MEM = 0xe8, + CPU_ATTR_DEV_CS0 = 0x3e, + CPU_ATTR_DEV_CS1 = 0x3d, + CPU_ATTR_DEV_CS2 = 0x3b, + CPU_ATTR_DEV_CS3 = 0x37, +}; + +/* + * Default Device Address MAP BAR values + */ +#define DEFADR_PCI_MEM 0x90000000 +#define DEFADR_PCI_IO 0xC0000000 +#define DEFADR_SPIF 0xF4000000 +#define DEFADR_BOOTROM 0xF8000000 + +struct mbus_win { + u32 base; + u32 size; + u8 target; + u8 attr; +}; + +/* + * System registers + * Ref: Datasheet sec:A.28 + */ +struct mvebu_system_registers { + u8 pad1[0x60]; + u32 rstoutn_mask; /* 0x60 */ + u32 sys_soft_rst; /* 0x64 */ +}; + +/* + * GPIO Registers + * Ref: Datasheet sec:A.19 + */ +struct kwgpio_registers { + u32 dout; + u32 oe; + u32 blink_en; + u32 din_pol; + u32 din; + u32 irq_cause; + u32 irq_mask; + u32 irq_level; +}; + +/* + * functions + */ +unsigned int mvebu_sdram_bar(enum memory_bank bank); +unsigned int mvebu_sdram_bs(enum memory_bank bank); +void mvebu_sdram_size_adjust(enum memory_bank bank); +int mvebu_mbus_probe(struct mbus_win windows[], int count); +#endif /* __ASSEMBLY__ */ +#endif /* _ARMADA_XP_CPU_H */ diff --git a/arch/arm/include/asm/arch-armada-xp/soc.h b/arch/arm/include/asm/arch-armada-xp/soc.h new file mode 100644 index 0000000..963e7ac --- /dev/null +++ b/arch/arm/include/asm/arch-armada-xp/soc.h @@ -0,0 +1,57 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * + * Header file for the Marvell's Feroceon CPU core. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ASM_ARCH_ARMADA_XP_H +#define _ASM_ARCH_ARMADA_XP_H + +#define SOC_MV78460_ID 0x7846 + +/* TCLK Core Clock definition */ +#ifndef CONFIG_SYS_TCLK +#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ +#endif + +/* SOC specific definations */ +#define INTREG_BASE 0xd0000000 +#define INTREG_BASE_ADDR_REG (INTREG_BASE + 0x20080) +#define SOC_REGS_PHY_BASE 0xf1000000 +#define MVEBU_REGISTER(x) (SOC_REGS_PHY_BASE + x) + +#define MVEBU_SDRAM_SCRATCH (MVEBU_REGISTER(0x01504)) +#define MVEBU_SPI_BASE (MVEBU_REGISTER(0x10600)) +#define MVEBU_TWSI_BASE (MVEBU_REGISTER(0x11000)) +#define MVEBU_UART0_BASE (MVEBU_REGISTER(0x12000)) +#define MVEBU_UART1_BASE (MVEBU_REGISTER(0x12100)) +#define MVEBU_MPP_BASE (MVEBU_REGISTER(0x18000)) +#define MVEBU_GPIO0_BASE (MVEBU_REGISTER(0x18100)) +#define MVEBU_GPIO1_BASE (MVEBU_REGISTER(0x18140)) +#define MVEBU_GPIO2_BASE (MVEBU_REGISTER(0x18180)) +#define MVEBU_SYSTEM_REG_BASE (MVEBU_REGISTER(0x18200)) +#define MVEBU_CPU_WIN_BASE (MVEBU_REGISTER(0x20000)) +#define MVEBU_SDRAM_BASE (MVEBU_REGISTER(0x20180)) +#define MVEBU_TIMER_BASE (MVEBU_REGISTER(0x20300)) +#define MVEBU_EGIGA2_BASE (MVEBU_REGISTER(0x30000)) +#define MVEBU_EGIGA3_BASE (MVEBU_REGISTER(0x34000)) +#define MVEBU_REG_PCIE_BASE (MVEBU_REGISTER(0x40000)) +#define MVEBU_EGIGA0_BASE (MVEBU_REGISTER(0x70000)) +#define MVEBU_EGIGA1_BASE (MVEBU_REGISTER(0x74000)) + +#define SDRAM_MAX_CS 4 +#define SDRAM_ADDR_MASK 0xFF000000 + +/* Armada XP GbE controller has 4 ports */ +#define MAX_MVNETA_DEVS 4 + +/* Kirkwood CPU memory windows */ +#define MVCPU_WIN_CTRL_DATA CPU_WIN_CTRL_DATA +#define MVCPU_WIN_ENABLE CPU_WIN_ENABLE +#define MVCPU_WIN_DISABLE CPU_WIN_DISABLE + +#endif /* _ASM_ARCH_ARMADA_XP_H */ diff --git a/arch/arm/include/asm/arch-bcm2835/mbox.h b/arch/arm/include/asm/arch-bcm2835/mbox.h index dded857..61f427d 100644 --- a/arch/arm/include/asm/arch-bcm2835/mbox.h +++ b/arch/arm/include/asm/arch-bcm2835/mbox.h @@ -119,6 +119,20 @@ struct bcm2835_mbox_tag_hdr { * }; */ +#define BCM2835_MBOX_TAG_GET_MAC_ADDRESS 0x00010003 + +struct bcm2835_mbox_tag_get_mac_address { + struct bcm2835_mbox_tag_hdr tag_hdr; + union { + struct { + } req; + struct { + u8 mac[6]; + u8 pad[2]; + } resp; + } body; +}; + #define BCM2835_MBOX_TAG_GET_ARM_MEMORY 0x00010005 struct bcm2835_mbox_tag_get_arm_mem { diff --git a/arch/arm/include/asm/arch-kirkwood/config.h b/arch/arm/include/asm/arch-kirkwood/config.h index f7bfa0e..ccc8e4e 100644 --- a/arch/arm/include/asm/arch-kirkwood/config.h +++ b/arch/arm/include/asm/arch-kirkwood/config.h @@ -23,7 +23,7 @@ #error "SOC Name not defined" #endif /* CONFIG_KW88F6281 */ -#include <asm/arch/kirkwood.h> +#include <asm/arch/soc.h> #define CONFIG_ARM926EJS 1 /* Basic Architecture */ #define CONFIG_SYS_CACHELINE_SIZE 32 /* default Dcache Line length for kirkwood */ diff --git a/arch/arm/include/asm/arch-kirkwood/cpu.h b/arch/arm/include/asm/arch-kirkwood/cpu.h index 97daa40..926d347 100644 --- a/arch/arm/include/asm/arch-kirkwood/cpu.h +++ b/arch/arm/include/asm/arch-kirkwood/cpu.h @@ -140,11 +140,11 @@ struct kwgpio_registers { * functions */ unsigned char get_random_hex(void); -unsigned int kw_sdram_bar(enum memory_bank bank); -unsigned int kw_sdram_bs(enum memory_bank bank); -void kw_sdram_size_adjust(enum memory_bank bank); +unsigned int mvebu_sdram_bar(enum memory_bank bank); +unsigned int mvebu_sdram_bs(enum memory_bank bank); +void mvebu_sdram_size_adjust(enum memory_bank bank); int kw_config_adr_windows(void); -void kw_config_gpio(unsigned int gpp0_oe_val, unsigned int gpp1_oe_val, +void mvebu_config_gpio(unsigned int gpp0_oe_val, unsigned int gpp1_oe_val, unsigned int gpp0_oe, unsigned int gpp1_oe); int kw_config_mpp(unsigned int mpp0_7, unsigned int mpp8_15, unsigned int mpp16_23, unsigned int mpp24_31, diff --git a/arch/arm/include/asm/arch-kirkwood/gpio.h b/arch/arm/include/asm/arch-kirkwood/gpio.h index 5f4d786..aa8c5da 100644 --- a/arch/arm/include/asm/arch-kirkwood/gpio.h +++ b/arch/arm/include/asm/arch-kirkwood/gpio.h @@ -21,14 +21,14 @@ #define GPIO_MAX 50 #define GPIO_OFF(pin) (((pin) >> 5) ? 0x0040 : 0x0000) -#define GPIO_OUT(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x00) -#define GPIO_IO_CONF(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x04) -#define GPIO_BLINK_EN(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x08) -#define GPIO_IN_POL(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x0c) -#define GPIO_DATA_IN(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x10) -#define GPIO_EDGE_CAUSE(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x14) -#define GPIO_EDGE_MASK(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x18) -#define GPIO_LEVEL_MASK(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x1c) +#define GPIO_OUT(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x00) +#define GPIO_IO_CONF(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x04) +#define GPIO_BLINK_EN(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x08) +#define GPIO_IN_POL(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x0c) +#define GPIO_DATA_IN(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x10) +#define GPIO_EDGE_CAUSE(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x14) +#define GPIO_EDGE_MASK(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x18) +#define GPIO_LEVEL_MASK(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x1c) /* * Kirkwood-specific GPIO API diff --git a/arch/arm/include/asm/arch-kirkwood/kirkwood.h b/arch/arm/include/asm/arch-kirkwood/soc.h index 3ea51d7..58ed71b 100644 --- a/arch/arm/include/asm/arch-kirkwood/kirkwood.h +++ b/arch/arm/include/asm/arch-kirkwood/soc.h @@ -22,18 +22,19 @@ #define KW_REG_UNDOC_0x1470 (KW_REGISTER(0x1470)) #define KW_REG_UNDOC_0x1478 (KW_REGISTER(0x1478)) +#define MVEBU_SDRAM_BASE (KW_REGISTER(0x1500)) #define KW_TWSI_BASE (KW_REGISTER(0x11000)) #define KW_UART0_BASE (KW_REGISTER(0x12000)) #define KW_UART1_BASE (KW_REGISTER(0x12100)) #define KW_MPP_BASE (KW_REGISTER(0x10000)) -#define KW_GPIO0_BASE (KW_REGISTER(0x10100)) -#define KW_GPIO1_BASE (KW_REGISTER(0x10140)) +#define MVEBU_GPIO0_BASE (KW_REGISTER(0x10100)) +#define MVEBU_GPIO1_BASE (KW_REGISTER(0x10140)) #define KW_RTC_BASE (KW_REGISTER(0x10300)) #define KW_NANDF_BASE (KW_REGISTER(0x10418)) -#define KW_SPI_BASE (KW_REGISTER(0x10600)) +#define MVEBU_SPI_BASE (KW_REGISTER(0x10600)) #define KW_CPU_WIN_BASE (KW_REGISTER(0x20000)) #define KW_CPU_REG_BASE (KW_REGISTER(0x20100)) -#define KW_TIMER_BASE (KW_REGISTER(0x20300)) +#define MVEBU_TIMER_BASE (KW_REGISTER(0x20300)) #define KW_REG_PCIE_BASE (KW_REGISTER(0x40000)) #define KW_USB20_BASE (KW_REGISTER(0x50000)) #define KW_EGIGA0_BASE (KW_REGISTER(0x72000)) diff --git a/arch/arm/include/asm/arch-kirkwood/spi.h b/arch/arm/include/asm/arch-mvebu/spi.h index e512dce..e512dce 100644 --- a/arch/arm/include/asm/arch-kirkwood/spi.h +++ b/arch/arm/include/asm/arch-mvebu/spi.h diff --git a/arch/arm/include/asm/arch-mxs/sys_proto.h b/arch/arm/include/asm/arch-mxs/sys_proto.h index 09dfc90..062f3de 100644 --- a/arch/arm/include/asm/arch-mxs/sys_proto.h +++ b/arch/arm/include/asm/arch-mxs/sys_proto.h @@ -10,6 +10,8 @@ #ifndef __SYS_PROTO_H__ #define __SYS_PROTO_H__ +#include <asm/imx-common/regs-common.h> + int mxs_reset_block(struct mxs_register_32 *reg); int mxs_wait_mask_set(struct mxs_register_32 *reg, uint32_t mask, diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h index 5866bf2..34bd8c5 100644 --- a/arch/arm/include/asm/arch-omap3/sys_proto.h +++ b/arch/arm/include/asm/arch-omap3/sys_proto.h @@ -64,6 +64,7 @@ void try_unlock_memory(void); u32 get_boot_type(void); void invalidate_dcache(u32); u32 wait_on_value(u32, u32, void *, u32); +void cancel_out(u32 *num, u32 *den, u32 den_limit); void sdelay(unsigned long); void make_cs1_contiguous(void); void omap_nand_switch_ecc(uint32_t, uint32_t); diff --git a/arch/arm/include/asm/arch-socfpga/spl.h b/arch/arm/include/asm/arch-socfpga/spl.h deleted file mode 100644 index 7e310d5..0000000 --- a/arch/arm/include/asm/arch-socfpga/spl.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright (C) 2012 Pavel Machek <pavel@denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _SOCFPGA_SPL_H_ -#define _SOCFPGA_SPL_H_ - -/* Symbols from linker script */ -extern char __malloc_start, __malloc_end, __stack_start; - -#define BOOT_DEVICE_RAM 1 - -#endif diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h index 5669f39..c562f62 100644 --- a/arch/arm/include/asm/arch-sunxi/clock.h +++ b/arch/arm/include/asm/arch-sunxi/clock.h @@ -15,12 +15,17 @@ #define CLK_GATE_CLOSE 0x0 /* clock control module regs definition */ +#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I) +#include <asm/arch/clock_sun6i.h> +#else #include <asm/arch/clock_sun4i.h> +#endif #ifndef __ASSEMBLY__ int clock_init(void); int clock_twi_onoff(int port, int state); void clock_set_pll1(unsigned int hz); +unsigned int clock_get_pll5p(void); unsigned int clock_get_pll6(void); void clock_init_safe(void); void clock_init_uart(void); diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h index 1ba997a..90af8e2 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h @@ -199,13 +199,16 @@ struct sunxi_ccm_reg { #define CCM_PLL5_CTRL_M1_MASK CCM_PLL5_CTRL_M1(0x3) #define CCM_PLL5_CTRL_M1_X(n) ((n) - 1) #define CCM_PLL5_CTRL_K(n) (((n) & 0x3) << 4) +#define CCM_PLL5_CTRL_K_SHIFT 4 #define CCM_PLL5_CTRL_K_MASK CCM_PLL5_CTRL_K(0x3) #define CCM_PLL5_CTRL_K_X(n) ((n) - 1) #define CCM_PLL5_CTRL_LDO (0x1 << 7) #define CCM_PLL5_CTRL_N(n) (((n) & 0x1f) << 8) +#define CCM_PLL5_CTRL_N_SHIFT 8 #define CCM_PLL5_CTRL_N_MASK CCM_PLL5_CTRL_N(0x1f) #define CCM_PLL5_CTRL_N_X(n) (n) #define CCM_PLL5_CTRL_P(n) (((n) & 0x3) << 16) +#define CCM_PLL5_CTRL_P_SHIFT 16 #define CCM_PLL5_CTRL_P_MASK CCM_PLL5_CTRL_P(0x3) #define CCM_PLL5_CTRL_P_X(n) ((n) - 1) #define CCM_PLL5_CTRL_BW (0x1 << 18) diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h new file mode 100644 index 0000000..1397b35 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h @@ -0,0 +1,205 @@ +/* + * sun6i clock register definitions + * + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_CLOCK_SUN6I_H +#define _SUNXI_CLOCK_SUN6I_H + +struct sunxi_ccm_reg { + u32 pll1_cfg; /* 0x00 pll1 control */ + u32 reserved0; + u32 pll2_cfg; /* 0x08 pll2 control */ + u32 reserved1; + u32 pll3_cfg; /* 0x10 pll3 control */ + u32 reserved2; + u32 pll4_cfg; /* 0x18 pll4 control */ + u32 reserved3; + u32 pll5_cfg; /* 0x20 pll5 control */ + u32 reserved4; + u32 pll6_cfg; /* 0x28 pll6 control */ + u32 reserved5; + u32 pll7_cfg; /* 0x30 pll7 control */ + u32 reserved6; + u32 pll8_cfg; /* 0x38 pll8 control */ + u32 reserved7; + u32 mipi_pll_cfg; /* 0x40 MIPI pll control */ + u32 pll9_cfg; /* 0x44 pll9 control */ + u32 pll10_cfg; /* 0x48 pll10 control */ + u32 reserved8; + u32 cpu_axi_cfg; /* 0x50 CPU/AXI divide ratio */ + u32 ahb1_apb1_div; /* 0x54 AHB1/APB1 divide ratio */ + u32 apb2_div; /* 0x58 APB2 divide ratio */ + u32 axi_gate; /* 0x5c axi module clock gating */ + u32 ahb_gate0; /* 0x60 ahb module clock gating 0 */ + u32 ahb_gate1; /* 0x64 ahb module clock gating 1 */ + u32 apb1_gate; /* 0x68 apb1 module clock gating */ + u32 apb2_gate; /* 0x6c apb2 module clock gating */ + u32 reserved9[4]; + u32 nand0_clk_cfg; /* 0x80 nand0 clock control */ + u32 nand1_clk_cfg; /* 0x84 nand1 clock control */ + u32 sd0_clk_cfg; /* 0x88 sd0 clock control */ + u32 sd1_clk_cfg; /* 0x8c sd1 clock control */ + u32 sd2_clk_cfg; /* 0x90 sd2 clock control */ + u32 sd3_clk_cfg; /* 0x94 sd3 clock control */ + u32 ts_clk_cfg; /* 0x98 transport stream clock control */ + u32 ss_clk_cfg; /* 0x9c security system clock control */ + u32 spi0_clk_cfg; /* 0xa0 spi0 clock control */ + u32 spi1_clk_cfg; /* 0xa4 spi1 clock control */ + u32 spi2_clk_cfg; /* 0xa8 spi2 clock control */ + u32 spi3_clk_cfg; /* 0xac spi3 clock control */ + u32 i2s0_clk_cfg; /* 0xb0 I2S0 clock control*/ + u32 i2s1_clk_cfg; /* 0xb4 I2S1 clock control */ + u32 reserved10[2]; + u32 spdif_clk_cfg; /* 0xc0 SPDIF clock control */ + u32 reserved11[2]; + u32 usb_clk_cfg; /* 0xcc USB clock control */ + u32 gmac_clk_cfg; /* 0xd0 GMAC clock control */ + u32 reserved12[7]; + u32 mdfs_clk_cfg; /* 0xf0 MDFS clock control */ + u32 dram_clk_cfg; /* 0xf4 DRAM configuration clock control */ + u32 reserved13[2]; + u32 dram_clk_gate; /* 0x100 DRAM module gating */ + u32 be0_clk_cfg; /* 0x104 BE0 module clock */ + u32 be1_clk_cfg; /* 0x108 BE1 module clock */ + u32 fe0_clk_cfg; /* 0x10c FE0 module clock */ + u32 fe1_clk_cfg; /* 0x110 FE1 module clock */ + u32 mp_clk_cfg; /* 0x114 MP module clock */ + u32 lcd0_ch0_clk_cfg; /* 0x118 LCD0 CH0 module clock */ + u32 lcd1_ch0_clk_cfg; /* 0x11c LCD1 CH0 module clock */ + u32 reserved14[3]; + u32 lcd0_ch1_clk_cfg; /* 0x12c LCD0 CH1 module clock */ + u32 lcd1_ch1_clk_cfg; /* 0x130 LCD1 CH1 module clock */ + u32 csi0_clk_cfg; /* 0x134 CSI0 module clock */ + u32 csi1_clk_cfg; /* 0x138 CSI1 module clock */ + u32 ve_clk_cfg; /* 0x13c VE module clock */ + u32 adda_clk_cfg; /* 0x140 ADDA module clock */ + u32 avs_clk_cfg; /* 0x144 AVS module clock */ + u32 dmic_clk_cfg; /* 0x148 Digital Mic module clock*/ + u32 reserved15; + u32 hdmi_clk_cfg; /* 0x150 HDMI module clock */ + u32 ps_clk_cfg; /* 0x154 PS module clock */ + u32 mtc_clk_cfg; /* 0x158 MTC module clock */ + u32 mbus0_clk_cfg; /* 0x15c MBUS0 module clock */ + u32 mbus1_clk_cfg; /* 0x160 MBUS1 module clock */ + u32 reserved16; + u32 mipi_dsi_clk_cfg; /* 0x168 MIPI DSI clock control */ + u32 mipi_csi_clk_cfg; /* 0x16c MIPI CSI clock control */ + u32 reserved17[4]; + u32 iep_drc0_clk_cfg; /* 0x180 IEP DRC0 module clock */ + u32 iep_drc1_clk_cfg; /* 0x184 IEP DRC1 module clock */ + u32 iep_deu0_clk_cfg; /* 0x188 IEP DEU0 module clock */ + u32 iep_deu1_clk_cfg; /* 0x18c IEP DEU1 module clock */ + u32 reserved18[4]; + u32 gpu_core_clk_cfg; /* 0x1a0 GPU core clock config */ + u32 gpu_mem_clk_cfg; /* 0x1a4 GPU memory clock config */ + u32 gpu_hyd_clk_cfg; /* 0x1a0 GPU HYD clock config */ + u32 reserved19[21]; + u32 pll_lock; /* 0x200 PLL Lock Time */ + u32 pll1_lock; /* 0x204 PLL1 Lock Time */ + u32 reserved20[6]; + u32 pll1_bias_cfg; /* 0x220 PLL1 Bias config */ + u32 pll2_bias_cfg; /* 0x224 PLL2 Bias config */ + u32 pll3_bias_cfg; /* 0x228 PLL3 Bias config */ + u32 pll4_bias_cfg; /* 0x22c PLL4 Bias config */ + u32 pll5_bias_cfg; /* 0x230 PLL5 Bias config */ + u32 pll6_bias_cfg; /* 0x234 PLL6 Bias config */ + u32 pll7_bias_cfg; /* 0x238 PLL7 Bias config */ + u32 pll8_bias_cfg; /* 0x23c PLL8 Bias config */ + u32 mipi_bias_cfg; /* 0x240 MIPI Bias config */ + u32 pll9_bias_cfg; /* 0x244 PLL9 Bias config */ + u32 pll10_bias_cfg; /* 0x248 PLL10 Bias config */ + u32 reserved21[13]; + u32 pll1_pattern_cfg; /* 0x280 PLL1 Pattern config */ + u32 pll2_pattern_cfg; /* 0x284 PLL2 Pattern config */ + u32 pll3_pattern_cfg; /* 0x288 PLL3 Pattern config */ + u32 pll4_pattern_cfg; /* 0x28c PLL4 Pattern config */ + u32 pll5_pattern_cfg; /* 0x290 PLL5 Pattern config */ + u32 pll6_pattern_cfg; /* 0x294 PLL6 Pattern config */ + u32 pll7_pattern_cfg; /* 0x298 PLL7 Pattern config */ + u32 pll8_pattern_cfg; /* 0x29c PLL8 Pattern config */ + u32 mipi_pattern_cfg; /* 0x2a0 MIPI Pattern config */ + u32 pll9_pattern_cfg; /* 0x2a4 PLL9 Pattern config */ + u32 pll10_pattern_cfg; /* 0x2a8 PLL10 Pattern config */ + u32 reserved22[5]; + u32 ahb_reset0_cfg; /* 0x2c0 AHB1 Reset 0 config */ + u32 ahb_reset1_cfg; /* 0x2c4 AHB1 Reset 1 config */ + u32 ahb_reset2_cfg; /* 0x2c8 AHB1 Reset 2 config */ + u32 reserved23; + u32 apb1_reset_cfg; /* 0x2d0 APB1 Reset config */ + u32 reserved24; + u32 apb2_reset_cfg; /* 0x2d8 APB2 Reset config */ +}; + +/* apb2 bit field */ +#define APB2_CLK_SRC_LOSC (0x0 << 24) +#define APB2_CLK_SRC_OSC24M (0x1 << 24) +#define APB2_CLK_SRC_PLL6 (0x2 << 24) +#define APB2_CLK_SRC_MASK (0x3 << 24) +#define APB2_CLK_RATE_N_1 (0x0 << 16) +#define APB2_CLK_RATE_N_2 (0x1 << 16) +#define APB2_CLK_RATE_N_4 (0x2 << 16) +#define APB2_CLK_RATE_N_8 (0x3 << 16) +#define APB2_CLK_RATE_N_MASK (3 << 16) +#define APB2_CLK_RATE_M(m) (((m)-1) << 0) +#define APB2_CLK_RATE_M_MASK (0x1f << 0) + +/* apb2 gate field */ +#define APB2_GATE_UART_SHIFT (16) +#define APB2_GATE_UART_MASK (0xff << APB2_GATE_UART_SHIFT) +#define APB2_GATE_TWI_SHIFT (0) +#define APB2_GATE_TWI_MASK (0xf << APB2_GATE_TWI_SHIFT) + +/* cpu_axi_cfg bits */ +#define AXI_DIV_SHIFT 0 +#define ATB_DIV_SHIFT 8 +#define CPU_CLK_SRC_SHIFT 16 + +#define AXI_DIV_1 0 +#define AXI_DIV_2 1 +#define AXI_DIV_3 2 +#define AXI_DIV_4 3 +#define ATB_DIV_1 0 +#define ATB_DIV_2 1 +#define ATB_DIV_4 2 +#define CPU_CLK_SRC_OSC24M 1 +#define CPU_CLK_SRC_PLL1 2 + +#define PLL1_CFG_DEFAULT 0x90011b21 + +#define PLL6_CFG_DEFAULT 0x90041811 + +#define CCM_PLL6_CTRL_N_SHIFT 8 +#define CCM_PLL6_CTRL_N_MASK (0x1f << CCM_PLL6_CTRL_N_SHIFT) +#define CCM_PLL6_CTRL_K_SHIFT 4 +#define CCM_PLL6_CTRL_K_MASK (0x3 << CCM_PLL6_CTRL_K_SHIFT) + +#define AHB_GATE_OFFSET_MMC3 11 +#define AHB_GATE_OFFSET_MMC2 10 +#define AHB_GATE_OFFSET_MMC1 9 +#define AHB_GATE_OFFSET_MMC0 8 +#define AHB_GATE_OFFSET_MMC(n) (AHB_GATE_OFFSET_MMC0 + (n)) + +#define CCM_MMC_CTRL_OSCM24 (0x0 << 24) +#define CCM_MMC_CTRL_PLL6 (0x1 << 24) + +#define CCM_MMC_CTRL_ENABLE (0x1 << 31) + +#define AHB_RESET_OFFSET_MMC3 11 +#define AHB_RESET_OFFSET_MMC2 10 +#define AHB_RESET_OFFSET_MMC1 9 +#define AHB_RESET_OFFSET_MMC0 8 +#define AHB_RESET_OFFSET_MMC(n) (AHB_RESET_OFFSET_MMC0 + (n)) + +/* apb2 reset */ +#define APB2_RESET_UART_SHIFT (16) +#define APB2_RESET_UART_MASK (0xff << APB2_RESET_UART_SHIFT) +#define APB2_RESET_TWI_SHIFT (0) +#define APB2_RESET_TWI_MASK (0xf << APB2_RESET_TWI_SHIFT) + +#endif /* _SUNXI_CLOCK_SUN6I_H */ diff --git a/arch/arm/include/asm/arch-sunxi/cpu.h b/arch/arm/include/asm/arch-sunxi/cpu.h index a987e51d..0de79a0 100644 --- a/arch/arm/include/asm/arch-sunxi/cpu.h +++ b/arch/arm/include/asm/arch-sunxi/cpu.h @@ -95,6 +95,11 @@ #define SUNXI_MALI400_BASE 0x01c40000 #define SUNXI_GMAC_BASE 0x01c50000 +#define SUNXI_DRAM_COM_BASE 0x01c62000 +#define SUNXI_DRAM_CTL_BASE 0x01c63000 +#define SUNXI_DRAM_PHY_CH1_BASE 0x01c65000 +#define SUNXI_DRAM_PHY_CH2_BASE 0x01c66000 + /* module sram */ #define SUNXI_SRAM_C_BASE 0x01d00000 @@ -105,6 +110,11 @@ #define SUNXI_MP_BASE 0x01e80000 #define SUNXI_AVG_BASE 0x01ea0000 +#define SUNXI_PRCM_BASE 0x01f01400 +#define SUNXI_R_UART_BASE 0x01f02800 +#define SUNXI_R_PIO_BASE 0x01f02c00 +#define SUNXI_P2WI_BASE 0x01f03400 + /* CoreSight Debug Module */ #define SUNXI_CSDM_BASE 0x3f500000 diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index f7f3d8c..7bb6499 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -10,6 +10,7 @@ #define _SUNXI_GPIO_H #include <linux/types.h> +#include <asm/arch/cpu.h> /* * sunxi has 9 banks of gpio, they are: @@ -27,8 +28,27 @@ #define SUNXI_GPIO_G 6 #define SUNXI_GPIO_H 7 #define SUNXI_GPIO_I 8 + +/* + * This defines the number of GPIO banks for the _main_ GPIO controller. + * You should fix up the padding in struct sunxi_gpio_reg below if you + * change this. + */ #define SUNXI_GPIO_BANKS 9 +/* + * sun6i/sun8i and later SoCs have an additional GPIO controller (R_PIO) + * at a different register offset. + * + * sun6i has 2 banks: + * PL0 - PL8 | PM0 - PM7 + * + * sun8i has 1 bank: + * PL0 - PL11 + */ +#define SUNXI_GPIO_L 11 +#define SUNXI_GPIO_M 12 + struct sunxi_gpio { u32 cfg[4]; u32 dat; @@ -50,8 +70,9 @@ struct sunxi_gpio_reg { struct sunxi_gpio_int gpio_int; }; -#define BANK_TO_GPIO(bank) \ - &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank] +#define BANK_TO_GPIO(bank) (((bank) < SUNXI_GPIO_L) ? \ + &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank] : \ + &((struct sunxi_gpio_reg *)SUNXI_R_PIO_BASE)->gpio_bank[(bank) - SUNXI_GPIO_L]) #define GPIO_BANK(pin) ((pin) >> 5) #define GPIO_NUM(pin) ((pin) & 0x1f) @@ -75,6 +96,8 @@ struct sunxi_gpio_reg { #define SUNXI_GPIO_G_NR 32 #define SUNXI_GPIO_H_NR 32 #define SUNXI_GPIO_I_NR 32 +#define SUNXI_GPIO_L_NR 32 +#define SUNXI_GPIO_M_NR 32 #define SUNXI_GPIO_NEXT(__gpio) \ ((__gpio##_START) + (__gpio##_NR) + 0) @@ -89,6 +112,8 @@ enum sunxi_gpio_number { SUNXI_GPIO_G_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_F), SUNXI_GPIO_H_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_G), SUNXI_GPIO_I_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_H), + SUNXI_GPIO_L_START = 352, + SUNXI_GPIO_M_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_L), }; /* SUNXI GPIO number definitions */ @@ -101,6 +126,8 @@ enum sunxi_gpio_number { #define SUNXI_GPG(_nr) (SUNXI_GPIO_G_START + (_nr)) #define SUNXI_GPH(_nr) (SUNXI_GPIO_H_START + (_nr)) #define SUNXI_GPI(_nr) (SUNXI_GPIO_I_START + (_nr)) +#define SUNXI_GPL(_nr) (SUNXI_GPIO_L_START + (_nr)) +#define SUNXI_GPM(_nr) (SUNXI_GPIO_M_START + (_nr)) /* GPIO pin function config */ #define SUNXI_GPIO_INPUT 0 @@ -117,6 +144,8 @@ enum sunxi_gpio_number { #define SUN5I_GPB19_UART0_TX 2 #define SUN5I_GPB20_UART0_RX 2 +#define SUN5I_GPG3_SDC1 2 + #define SUN5I_GPG3_UART1_TX 4 #define SUN5I_GPG4_UART1_RX 4 @@ -125,15 +154,27 @@ enum sunxi_gpio_number { #define SUNXI_GPF0_SDC0 2 #define SUNXI_GPF2_SDC0 2 + +#ifdef CONFIG_SUN8I +#define SUNXI_GPF2_UART0_TX 3 +#define SUNXI_GPF4_UART0_RX 3 +#else #define SUNXI_GPF2_UART0_TX 4 #define SUNXI_GPF4_UART0_RX 4 +#endif #define SUN4I_GPG0_SDC1 4 #define SUN4I_GPH22_SDC1 5 +#define SUN6I_GPH20_UART0_TX 2 +#define SUN6I_GPH21_UART0_RX 2 + #define SUN4I_GPI4_SDC3 2 +#define SUN8I_GPL2_R_UART_TX 2 +#define SUN8I_GPL3_R_UART_RX 2 + /* GPIO pin pull-up/down config */ #define SUNXI_GPIO_PULL_DISABLE 0 #define SUNXI_GPIO_PULL_UP 1 diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h index 53196e3..8a21674 100644 --- a/arch/arm/include/asm/arch-sunxi/mmc.h +++ b/arch/arm/include/asm/arch-sunxi/mmc.h @@ -43,7 +43,10 @@ struct sunxi_mmc { u32 chda; /* 0x90 */ u32 cbda; /* 0x94 */ u32 res1[26]; - u32 fifo; /* 0x100 FIFO access address */ +#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I) + u32 res2[64]; +#endif + u32 fifo; /* 0x100 (0x200 on sun6i) FIFO access address */ }; #define SUNXI_MMC_CLK_POWERSAVE (0x1 << 17) @@ -120,5 +123,5 @@ struct sunxi_mmc { #define SUNXI_MMC_IDIE_TXIRQ (0x1 << 0) #define SUNXI_MMC_IDIE_RXIRQ (0x1 << 1) -int sunxi_mmc_init(int sdc_no); +struct mmc *sunxi_mmc_init(int sdc_no); #endif /* _SUNXI_MMC_H */ diff --git a/arch/arm/include/asm/arch-sunxi/prcm.h b/arch/arm/include/asm/arch-sunxi/prcm.h new file mode 100644 index 0000000..3d3bfa6 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/prcm.h @@ -0,0 +1,238 @@ +/* + * Sunxi A31 Power Management Unit register definition. + * + * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl> + * http://linux-sunxi.org + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Berg Xing <bergxing@allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_PRCM_H +#define _SUNXI_PRCM_H + +#define __PRCM_CPUS_CFG_PRE(n) (((n) & 0x3) << 4) +#define PRCM_CPUS_CFG_PRE_MASK __PRCM_CPUS_CFG_PRE(0x3) +#define __PRCM_CPUS_CFG_PRE_DIV(n) (((n) >> 1) - 1) +#define PRCM_CPUS_CFG_PRE_DIV(n) \ + __PRCM_CPUS_CFG_PRE(__PRCM_CPUS_CFG_CLK_PRE(n)) +#define __PRCM_CPUS_CFG_POST(n) (((n) & 0x1f) << 8) +#define PRCM_CPUS_CFG_POST_MASK __PRCM_CPUS_CFG_POST(0x1f) +#define __PRCM_CPUS_CFG_POST_DIV(n) ((n) - 1) +#define PRCM_CPUS_CFG_POST_DIV(n) \ + __PRCM_CPUS_CFG_POST_DIV(__PRCM_CPUS_CFG_POST_DIV(n)) +#define __PRCM_CPUS_CFG_CLK_SRC(n) (((n) & 0x3) << 16) +#define PRCM_CPUS_CFG_CLK_SRC_MASK __PRCM_CPUS_CFG_CLK_SRC(0x3) +#define __PRCM_CPUS_CFG_CLK_SRC_LOSC 0x0 +#define __PRCM_CPUS_CFG_CLK_SRC_HOSC 0x1 +#define __PRCM_CPUS_CFG_CLK_SRC_PLL6 0x2 +#define __PRCM_CPUS_CFG_CLK_SRC_PDIV 0x3 +#define PRCM_CPUS_CFG_CLK_SRC_LOSC \ + __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_LOSC) +#define PRCM_CPUS_CFG_CLK_SRC_HOSC \ + __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_HOSC) +#define PRCM_CPUS_CFG_CLK_SRC_PLL6 \ + __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_PLL6) +#define PRCM_CPUS_CFG_CLK_SRC_PDIV \ + __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_PDIV) + +#define __PRCM_APB0_RATIO(n) (((n) & 0x3) << 0) +#define PRCM_APB0_RATIO_DIV_MASK __PRCM_APB0_RATIO_DIV(0x3) +#define __PRCM_APB0_RATIO_DIV(n) (((n) >> 1) - 1) +#define PRCM_APB0_RATIO_DIV(n) \ + __PRCM_APB0_RATIO(__PRCM_APB0_RATIO_DIV(n)) + +#define PRCM_CPU_CFG_NEON_CLK_EN (0x1 << 0) +#define PRCM_CPU_CFG_CPU_CLK_EN (0x1 << 1) + +#define PRCM_APB0_GATE_PIO (0x1 << 0) +#define PRCM_APB0_GATE_IR (0x1 << 1) +#define PRCM_APB0_GATE_TIMER01 (0x1 << 2) +#define PRCM_APB0_GATE_P2WI (0x1 << 3) +#define PRCM_APB0_GATE_UART (0x1 << 4) +#define PRCM_APB0_GATE_1WIRE (0x1 << 5) +#define PRCM_APB0_GATE_I2C (0x1 << 6) + +#define PRCM_APB0_RESET_PIO (0x1 << 0) +#define PRCM_APB0_RESET_IR (0x1 << 1) +#define PRCM_APB0_RESET_TIMER01 (0x1 << 2) +#define PRCM_APB0_RESET_P2WI (0x1 << 3) +#define PRCM_APB0_RESET_UART (0x1 << 4) +#define PRCM_APB0_RESET_1WIRE (0x1 << 5) +#define PRCM_APB0_RESET_I2C (0x1 << 6) + +#define PRCM_PLL_CTRL_PLL_BIAS (0x1 << 0) +#define PRCM_PLL_CTRL_HOSC_GAIN_ENH (0x1 << 1) +#define __PRCM_PLL_CTRL_USB_CLK_SRC(n) (((n) & 0x3) << 4) +#define PRCM_PLL_CTRL_USB_CLK_SRC_MASK \ + __PRCM_PLL_CTRL_USB_CLK_SRC(0x3) +#define __PRCM_PLL_CTRL_USB_CLK_0 0x0 +#define __PRCM_PLL_CTRL_USB_CLK_1 0x1 +#define __PRCM_PLL_CTRL_USB_CLK_2 0x2 +#define __PRCM_PLL_CTRL_USB_CLK_3 0x3 +#define PRCM_PLL_CTRL_USB_CLK_0 \ + __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_0) +#define PRCM_PLL_CTRL_USB_CLK_1 \ + __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_1) +#define PRCM_PLL_CTRL_USB_CLK_2 \ + __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_2) +#define PRCM_PLL_CTRL_USB_CLK_3 \ + __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_3) +#define __PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) (((n) & 0x3) << 12) +#define PRCM_PLL_CTRL_INT_PLL_IN_SEL_MASK \ + __PRCM_PLL_CTRL_INT_PLL_IN_SEL(0x3) +#define PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) \ + __PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) +#define __PRCM_PLL_CTRL_HOSC_CLK_SEL(n) (((n) & 0x3) << 20) +#define PRCM_PLL_CTRL_HOSC_CLK_SEL_MASK \ + __PRCM_PLL_CTRL_HOSC_CLK_SEL(0x3) +#define __PRCM_PLL_CTRL_HOSC_CLK_0 0x0 +#define __PRCM_PLL_CTRL_HOSC_CLK_1 0x1 +#define __PRCM_PLL_CTRL_HOSC_CLK_2 0x2 +#define __PRCM_PLL_CTRL_HOSC_CLK_3 0x3 +#define PRCM_PLL_CTRL_HOSC_CLK_0 \ + __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_0) +#define PRCM_PLL_CTRL_HOSC_CLK_1 \ + __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_1) +#define PRCM_PLL_CTRL_HOSC_CLK_2 \ + __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_2) +#define PRCM_PLL_CTRL_HOSC_CLK_3 \ + __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_3) +#define PRCM_PLL_CTRL_PLL_TST_SRC_EXT (0x1 << 24) +#define PRCM_PLL_CTRL_LDO_DIGITAL_EN (0x1 << 0) +#define PRCM_PLL_CTRL_LDO_ANALOG_EN (0x1 << 1) +#define PRCM_PLL_CTRL_EXT_OSC_EN (0x1 << 2) +#define PRCM_PLL_CTRL_CLK_TST_EN (0x1 << 3) +#define PRCM_PLL_CTRL_IN_PWR_HIGH (0x1 << 15) /* 3.3 for hi 2.5 for lo */ +#define __PRCM_PLL_CTRL_VDD_LDO_OUT(n) (((n) & 0x7) << 16) +#define PRCM_PLL_CTRL_LDO_OUT_MASK \ + __PRCM_PLL_CTRL_LDO_OUT(0x7) +/* When using the low voltage 20 mV steps, and high voltage 30 mV steps */ +#define PRCM_PLL_CTRL_LDO_OUT_L(n) \ + __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1000) / 20) & 0x7) +#define PRCM_PLL_CTRL_LDO_OUT_H(n) \ + __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1160) / 30) & 0x7) +#define PRCM_PLL_CTRL_LDO_OUT_LV(n) \ + __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 20) + 1000) +#define PRCM_PLL_CTRL_LDO_OUT_HV(n) \ + __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 30) + 1160) +#define PRCM_PLL_CTRL_LDO_KEY (0xa7 << 24) + +#define PRCM_CLK_1WIRE_GATE (0x1 << 31) + +#define __PRCM_CLK_MOD0_M(n) (((n) & 0xf) << 0) +#define PRCM_CLK_MOD0_M_MASK __PRCM_CLK_MOD0_M(0xf) +#define __PRCM_CLK_MOD0_M_X(n) (n - 1) +#define PRCM_CLK_MOD0_M(n) __PRCM_CLK_MOD0_M(__PRCM_CLK_MOD0_M_X(n)) +#define PRCM_CLK_MOD0_OUT_PHASE(n) (((n) & 0x7) << 8) +#define PRCM_CLK_MOD0_OUT_PHASE_MASK(n) PRCM_CLK_MOD0_OUT_PHASE(0x7) +#define _PRCM_CLK_MOD0_N(n) (((n) & 0x3) << 16) +#define PRCM_CLK_MOD0_N_MASK __PRCM_CLK_MOD_N(0x3) +#define __PRCM_CLK_MOD0_N_X(n) (((n) >> 1) - 1) +#define PRCM_CLK_MOD0_N(n) __PRCM_CLK_MOD0_N(__PRCM_CLK_MOD0_N_X(n)) +#define PRCM_CLK_MOD0_SMPL_PHASE(n) (((n) & 0x7) << 20) +#define PRCM_CLK_MOD0_SMPL_PHASE_MASK PRCM_CLK_MOD0_SMPL_PHASE(0x7) +#define PRCM_CLK_MOD0_SRC_SEL(n) (((n) & 0x7) << 24) +#define PRCM_CLK_MOD0_SRC_SEL_MASK PRCM_CLK_MOD0_SRC_SEL(0x7) +#define PRCM_CLK_MOD0_GATE_EN (0x1 << 31) + +#define PRCM_APB0_RESET_PIO (0x1 << 0) +#define PRCM_APB0_RESET_IR (0x1 << 1) +#define PRCM_APB0_RESET_TIMER01 (0x1 << 2) +#define PRCM_APB0_RESET_P2WI (0x1 << 3) +#define PRCM_APB0_RESET_UART (0x1 << 4) +#define PRCM_APB0_RESET_1WIRE (0x1 << 5) +#define PRCM_APB0_RESET_I2C (0x1 << 6) + +#define __PRCM_CLK_OUTD_M(n) (((n) & 0x7) << 8) +#define PRCM_CLK_OUTD_M_MASK __PRCM_CLK_OUTD_M(0x7) +#define __PRCM_CLK_OUTD_M_X() ((n) - 1) +#define PRCM_CLK_OUTD_M(n) __PRCM_CLK_OUTD_M(__PRCM_CLK_OUTD_M_X(n)) +#define __PRCM_CLK_OUTD_N(n) (((n) & 0x7) << 20) +#define PRCM_CLK_OUTD_N_MASK __PRCM_CLK_OUTD_N(0x7) +#define __PRCM_CLK_OUTD_N_X(n) (((n) >> 1) - 1) +#define PRCM_CLK_OUTD_N(n) __PRCM_CLK_OUTD_N(__PRCM_CLK_OUTD_N_X(n) +#define __PRCM_CLK_OUTD_SRC_SEL(n) (((n) & 0x3) << 24) +#define PRCM_CLK_OUTD_SRC_SEL_MASK __PRCM_CLK_OUTD_SRC_SEL(0x3) +#define __PRCM_CLK_OUTD_SRC_LOSC2 0x0 +#define __PRCM_CLK_OUTD_SRC_LOSC 0x1 +#define __PRCM_CLK_OUTD_SRC_HOSC 0x2 +#define __PRCM_CLK_OUTD_SRC_ERR 0x3 +#define PRCM_CLK_OUTD_SRC_LOSC2 \ +#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_LOSC2) +#define PRCM_CLK_OUTD_SRC_LOSC \ +#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_LOSC) +#define PRCM_CLK_OUTD_SRC_HOSC \ +#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_HOSC) +#define PRCM_CLK_OUTD_SRC_ERR \ +#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_ERR) +#define PRCM_CLK_OUTD_EN (0x1 << 31) + +#define PRCM_CPU0_PWROFF (0x1 << 0) +#define PRCM_CPU1_PWROFF (0x1 << 1) +#define PRCM_CPU2_PWROFF (0x1 << 2) +#define PRCM_CPU3_PWROFF (0x1 << 3) +#define PRCM_CPU_ALL_PWROFF (0xf << 0) + +#define PRCM_VDD_SYS_DRAM_CH0_PAD_HOLD_PWROFF (0x1 << 0) +#define PRCM_VDD_SYS_DRAM_CH1_PAD_HOLD_PWROFF (0x1 << 1) +#define PRCM_VDD_SYS_AVCC_A_PWROFF (0x1 << 2) +#define PRCM_VDD_SYS_CPU0_VDD_PWROFF (0x1 << 3) + +#define PRCM_VDD_GPU_PWROFF (0x1 << 0) + +#define PRCM_VDD_SYS_RESET (0x1 << 0) + +#define PRCM_CPU1_PWR_CLAMP(n) (((n) & 0xff) << 0) +#define PRCM_CPU1_PWR_CLAMP_MASK PRCM_CPU1_PWR_CLAMP(0xff) + +#define PRCM_CPU2_PWR_CLAMP(n) (((n) & 0xff) << 0) +#define PRCM_CPU2_PWR_CLAMP_MASK PRCM_CPU2_PWR_CLAMP(0xff) + +#define PRCM_CPU3_PWR_CLAMP(n) (((n) & 0xff) << 0) +#define PRCM_CPU3_PWR_CLAMP_MASK PRCM_CPU3_PWR_CLAMP(0xff) + +#ifndef __ASSEMBLY__ +struct sunxi_prcm_reg { + u32 cpus_cfg; /* 0x000 */ + u8 res0[0x8]; /* 0x004 */ + u32 apb0_ratio; /* 0x00c */ + u32 cpu0_cfg; /* 0x010 */ + u32 cpu1_cfg; /* 0x014 */ + u32 cpu2_cfg; /* 0x018 */ + u32 cpu3_cfg; /* 0x01c */ + u8 res1[0x8]; /* 0x020 */ + u32 apb0_gate; /* 0x028 */ + u8 res2[0x14]; /* 0x02c */ + u32 pll_ctrl0; /* 0x040 */ + u32 pll_ctrl1; /* 0x044 */ + u8 res3[0x8]; /* 0x048 */ + u32 clk_1wire; /* 0x050 */ + u32 clk_ir; /* 0x054 */ + u8 res4[0x58]; /* 0x058 */ + u32 apb0_reset; /* 0x0b0 */ + u8 res5[0x3c]; /* 0x0b4 */ + u32 clk_outd; /* 0x0f0 */ + u8 res6[0xc]; /* 0x0f4 */ + u32 cpu_pwroff; /* 0x100 */ + u8 res7[0xc]; /* 0x104 */ + u32 vdd_sys_pwroff; /* 0x110 */ + u8 res8[0x4]; /* 0x114 */ + u32 gpu_pwroff; /* 0x118 */ + u8 res9[0x4]; /* 0x11c */ + u32 vdd_pwr_reset; /* 0x120 */ + u8 res10[0x20]; /* 0x124 */ + u32 cpu1_pwr_clamp; /* 0x144 */ + u32 cpu2_pwr_clamp; /* 0x148 */ + u32 cpu3_pwr_clamp; /* 0x14c */ + u8 res11[0x30]; /* 0x150 */ + u32 dram_pwr; /* 0x180 */ + u8 res12[0xc]; /* 0x184 */ + u32 dram_tst; /* 0x190 */ +}; + +void prcm_apb0_enable(u32 flags); +#endif /* __ASSEMBLY__ */ +#endif /* _PRCM_H */ diff --git a/arch/arm/include/asm/arch-sunxi/timer.h b/arch/arm/include/asm/arch-sunxi/timer.h index 58e14fd..03a0684 100644 --- a/arch/arm/include/asm/arch-sunxi/timer.h +++ b/arch/arm/include/asm/arch-sunxi/timer.h @@ -11,14 +11,10 @@ #ifndef _SUNXI_TIMER_H_ #define _SUNXI_TIMER_H_ -#define WDT_CTRL_RESTART (0x1 << 0) -#define WDT_CTRL_KEY (0x0a57 << 1) -#define WDT_MODE_EN (0x1 << 0) -#define WDT_MODE_RESET_EN (0x1 << 1) - #ifndef __ASSEMBLY__ #include <linux/types.h> +#include <asm/arch/watchdog.h> /* General purpose timer */ struct sunxi_timer { @@ -43,12 +39,6 @@ struct sunxi_64cnt { u32 hi; /* 0xa8 */ }; -/* Watchdog */ -struct sunxi_wdog { - u32 ctl; /* 0x90 */ - u32 mode; /* 0x94 */ -}; - /* Rtc */ struct sunxi_rtc { u32 ctl; /* 0x100 */ @@ -77,15 +67,20 @@ struct sunxi_timer_reg { struct sunxi_timer timer[6]; /* We have 6 timers */ u8 res2[16]; struct sunxi_avs avs; - struct sunxi_wdog wdog; - u8 res3[8]; - struct sunxi_64cnt cnt64; +#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) + struct sunxi_wdog wdog; /* 0x90 */ + /* XXX the following is not accurate for sun5i/sun7i */ + struct sunxi_64cnt cnt64; /* 0xa0 */ u8 res4[0x58]; struct sunxi_rtc rtc; struct sunxi_alarm alarm; struct sunxi_tgp tgp[4]; u8 res5[8]; u32 cpu_cfg; +#else /* CONFIG_SUN6I || CONFIG_SUN8I || ... */ + u8 res3[16]; + struct sunxi_wdog wdog[5]; /* We have 5 watchdogs */ +#endif }; #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/arch-sunxi/watchdog.h b/arch/arm/include/asm/arch-sunxi/watchdog.h new file mode 100644 index 0000000..ccc8fa3 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/watchdog.h @@ -0,0 +1,44 @@ +/* + * (C) Copyright 2014 + * Chen-Yu Tsai <wens@csie.org> + * + * Watchdog register definitions + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_WATCHDOG_H_ +#define _SUNXI_WATCHDOG_H_ + +#define WDT_CTRL_RESTART (0x1 << 0) +#define WDT_CTRL_KEY (0x0a57 << 1) + +#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) + +#define WDT_MODE_EN (0x1 << 0) +#define WDT_MODE_RESET_EN (0x1 << 1) + +struct sunxi_wdog { + u32 ctl; /* 0x00 */ + u32 mode; /* 0x04 */ + u32 res[2]; +}; + +#else + +#define WDT_CFG_RESET (0x1) +#define WDT_MODE_EN (0x1) + +struct sunxi_wdog { + u32 irq_en; /* 0x00 */ + u32 irq_sta; /* 0x04 */ + u32 res1[2]; + u32 ctl; /* 0x10 */ + u32 cfg; /* 0x14 */ + u32 mode; /* 0x18 */ + u32 res2; +}; + +#endif + +#endif /* _SUNXI_WATCHDOG_H_ */ diff --git a/arch/arm/include/asm/arch-tegra/board.h b/arch/arm/include/asm/arch-tegra/board.h index ff77364..783bb3c 100644 --- a/arch/arm/include/asm/arch-tegra/board.h +++ b/arch/arm/include/asm/arch-tegra/board.h @@ -24,10 +24,11 @@ void gpio_early_init(void); /* overrideable GPIO config */ * an empty stub function will be called. */ -void pinmux_init(void); /* overrideable general pinmux setup */ -void pin_mux_usb(void); /* overrideable USB pinmux setup */ -void pin_mux_spi(void); /* overrideable SPI pinmux setup */ -void pin_mux_nand(void); /* overrideable NAND pinmux setup */ -void pin_mux_display(void); /* overrideable DISPLAY pinmux setup */ +void pinmux_init(void); /* overridable general pinmux setup */ +void pin_mux_usb(void); /* overridable USB pinmux setup */ +void pin_mux_spi(void); /* overridable SPI pinmux setup */ +void pin_mux_nand(void); /* overridable NAND pinmux setup */ +void pin_mux_mmc(void); /* overridable mmc pinmux setup */ +void pin_mux_display(void); /* overridable DISPLAY pinmux setup */ #endif diff --git a/arch/arm/include/asm/arch-tegra114/mc.h b/arch/arm/include/asm/arch-tegra114/mc.h new file mode 100644 index 0000000..044b1e0 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra114/mc.h @@ -0,0 +1,37 @@ +/* + * (C) Copyright 2014 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA114_MC_H_ +#define _TEGRA114_MC_H_ + +/** + * Defines the memory controller registers we need/care about + */ +struct mc_ctlr { + u32 reserved0[4]; /* offset 0x00 - 0x0C */ + u32 mc_smmu_config; /* offset 0x10 */ + u32 mc_smmu_tlb_config; /* offset 0x14 */ + u32 mc_smmu_ptc_config; /* offset 0x18 */ + u32 mc_smmu_ptb_asid; /* offset 0x1C */ + u32 mc_smmu_ptb_data; /* offset 0x20 */ + u32 reserved1[3]; /* offset 0x24 - 0x2C */ + u32 mc_smmu_tlb_flush; /* offset 0x30 */ + u32 mc_smmu_ptc_flush; /* offset 0x34 */ + u32 reserved2[6]; /* offset 0x38 - 0x4C */ + u32 mc_emem_cfg; /* offset 0x50 */ + u32 mc_emem_adr_cfg; /* offset 0x54 */ + u32 mc_emem_adr_cfg_dev0; /* offset 0x58 */ + u32 mc_emem_adr_cfg_dev1; /* offset 0x5C */ + u32 reserved3[12]; /* offset 0x60 - 0x8C */ + u32 mc_emem_arb_reserved[28]; /* offset 0x90 - 0xFC */ + u32 reserved4[338]; /* offset 0x100 - 0x644 */ + u32 mc_video_protect_bom; /* offset 0x648 */ + u32 mc_video_protect_size_mb; /* offset 0x64c */ + u32 mc_video_protect_reg_ctrl; /* offset 0x650 */ +}; + +#endif /* _TEGRA114_MC_H_ */ diff --git a/arch/arm/include/asm/arch-tegra114/tegra.h b/arch/arm/include/asm/arch-tegra114/tegra.h index 5d426b5..c3d061e 100644 --- a/arch/arm/include/asm/arch-tegra114/tegra.h +++ b/arch/arm/include/asm/arch-tegra114/tegra.h @@ -19,6 +19,7 @@ #define NV_PA_SDRAM_BASE 0x80000000 /* 0x80000000 for real T114 */ #define NV_PA_TSC_BASE 0x700F0000 /* System Counter TSC regs */ +#define NV_PA_MC_BASE 0x70019000 #include <asm/arch-tegra/tegra.h> diff --git a/arch/arm/include/asm/arch-tegra20/mc.h b/arch/arm/include/asm/arch-tegra20/mc.h new file mode 100644 index 0000000..9c6e3ff --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/mc.h @@ -0,0 +1,36 @@ +/* + * (C) Copyright 2014 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA20_MC_H_ +#define _TEGRA20_MC_H_ + +/** + * Defines the memory controller registers we need/care about + */ +struct mc_ctlr { + u32 reserved0[3]; /* offset 0x00 - 0x08 */ + u32 mc_emem_cfg; /* offset 0x0C */ + u32 mc_emem_adr_cfg; /* offset 0x10 */ + u32 mc_emem_arb_cfg0; /* offset 0x14 */ + u32 mc_emem_arb_cfg1; /* offset 0x18 */ + u32 mc_emem_arb_cfg2; /* offset 0x1C */ + u32 reserved1; /* offset 0x20 */ + u32 mc_gart_cfg; /* offset 0x24 */ + u32 mc_gart_entry_addr; /* offset 0x28 */ + u32 mc_gart_entry_data; /* offset 0x2C */ + u32 mc_gart_error_req; /* offset 0x30 */ + u32 mc_gart_error_addr; /* offset 0x34 */ + u32 reserved2; /* offset 0x38 */ + u32 mc_timeout_ctrl; /* offset 0x3C */ + u32 reserved3[6]; /* offset 0x40 - 0x54 */ + u32 mc_decerr_emem_others_status; /* offset 0x58 */ + u32 mc_decerr_emem_others_adr; /* offset 0x5C */ + u32 reserved4[40]; /* offset 0x60 - 0xFC */ + u32 reserved5[93]; /* offset 0x100 - 0x270 */ +}; + +#endif /* _TEGRA20_MC_H_ */ diff --git a/arch/arm/include/asm/arch-tegra20/tegra.h b/arch/arm/include/asm/arch-tegra20/tegra.h index 18856ac..22774ab 100644 --- a/arch/arm/include/asm/arch-tegra20/tegra.h +++ b/arch/arm/include/asm/arch-tegra20/tegra.h @@ -9,6 +9,7 @@ #define _TEGRA20_H_ #define NV_PA_SDRAM_BASE 0x00000000 +#define NV_PA_MC_BASE 0x7000F000 #include <asm/arch-tegra/tegra.h> diff --git a/arch/arm/include/asm/arch-tegra30/mc.h b/arch/arm/include/asm/arch-tegra30/mc.h new file mode 100644 index 0000000..242a1fc --- /dev/null +++ b/arch/arm/include/asm/arch-tegra30/mc.h @@ -0,0 +1,38 @@ +/* + * (C) Copyright 2014 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA30_MC_H_ +#define _TEGRA30_MC_H_ + +/** + * Defines the memory controller registers we need/care about + */ +struct mc_ctlr { + u32 reserved0[4]; /* offset 0x00 - 0x0C */ + u32 mc_smmu_config; /* offset 0x10 */ + u32 mc_smmu_tlb_config; /* offset 0x14 */ + u32 mc_smmu_ptc_config; /* offset 0x18 */ + u32 mc_smmu_ptb_asid; /* offset 0x1C */ + u32 mc_smmu_ptb_data; /* offset 0x20 */ + u32 reserved1[3]; /* offset 0x24 - 0x2C */ + u32 mc_smmu_tlb_flush; /* offset 0x30 */ + u32 mc_smmu_ptc_flush; /* offset 0x34 */ + u32 mc_smmu_asid_security; /* offset 0x38 */ + u32 reserved2[5]; /* offset 0x3C - 0x4C */ + u32 mc_emem_cfg; /* offset 0x50 */ + u32 mc_emem_adr_cfg; /* offset 0x54 */ + u32 mc_emem_adr_cfg_dev0; /* offset 0x58 */ + u32 mc_emem_adr_cfg_dev1; /* offset 0x5C */ + u32 reserved3[12]; /* offset 0x60 - 0x8C */ + u32 mc_emem_arb_reserved[28]; /* offset 0x90 - 0xFC */ + u32 reserved4[338]; /* offset 0x100 - 0x644 */ + u32 mc_video_protect_bom; /* offset 0x648 */ + u32 mc_video_protect_size_mb; /* offset 0x64c */ + u32 mc_video_protect_reg_ctrl; /* offset 0x650 */ +}; + +#endif /* _TEGRA30_MC_H_ */ diff --git a/arch/arm/include/asm/arch-tegra30/tegra.h b/arch/arm/include/asm/arch-tegra30/tegra.h index c02c5d8..9367179 100644 --- a/arch/arm/include/asm/arch-tegra30/tegra.h +++ b/arch/arm/include/asm/arch-tegra30/tegra.h @@ -17,6 +17,7 @@ #ifndef _TEGRA30_H_ #define _TEGRA30_H_ +#define NV_PA_MC_BASE 0x7000F000 #define NV_PA_SDRAM_BASE 0x80000000 /* 0x80000000 for real T30 */ #include <asm/arch-tegra/tegra.h> diff --git a/arch/arm/include/asm/arch-uniphier/platdevice.h b/arch/arm/include/asm/arch-uniphier/platdevice.h new file mode 100644 index 0000000..cdf7d13 --- /dev/null +++ b/arch/arm/include/asm/arch-uniphier/platdevice.h @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef ARCH_PLATDEVICE_H +#define ARCH_PLATDEVICE_H + +#include <dm/platdata.h> +#include <dm/platform_data/serial-uniphier.h> + +#define SERIAL_DEVICE(n, ba, clk) \ +static struct uniphier_serial_platform_data serial_device##n = { \ + .base = ba, \ + .uartclk = clk \ +}; \ +U_BOOT_DEVICE(serial##n) = { \ + .name = DRIVER_NAME, \ + .platdata = &serial_device##n \ +}; + +#endif /* ARCH_PLATDEVICE_H */ diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h index 560924e..d4a447b 100644 --- a/arch/arm/include/asm/mach-types.h +++ b/arch/arm/include/asm/mach-types.h @@ -1107,6 +1107,7 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_ARMADILLO_800EVA 3863 #define MACH_TYPE_KZM9G 4140 #define MACH_TYPE_COLIBRI_T30 4493 +#define MACH_TYPE_APALIS_T30 4513 #ifdef CONFIG_ARCH_EBSA110 # ifdef machine_arch_type @@ -14248,6 +14249,18 @@ extern unsigned int __machine_arch_type; # define machine_is_colibri_t30() (0) #endif +#ifdef CONFIG_MACH_APALIS_T30 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_APALIS_T30 +# endif +# define machine_is_apalis_t30() (machine_arch_type == MACH_TYPE_APALIS_T30) +#else +# define machine_is_apalis_t30() (0) +#endif + /* * These have not yet been registered */ diff --git a/arch/arm/include/asm/omap_gpio.h b/arch/arm/include/asm/omap_gpio.h index 5d25d04..839af54 100644 --- a/arch/arm/include/asm/omap_gpio.h +++ b/arch/arm/include/asm/omap_gpio.h @@ -23,6 +23,21 @@ #include <asm/arch/cpu.h> +enum gpio_method { + METHOD_GPIO_24XX = 4, +}; + +#ifdef CONFIG_DM_GPIO + +/* Information about a GPIO bank */ +struct omap_gpio_platdata { + int bank_index; + ulong base; /* address of registers in physical memory */ + enum gpio_method method; +}; + +#else + struct gpio_bank { void *base; int method; @@ -30,8 +45,6 @@ struct gpio_bank { extern const struct gpio_bank *const omap_gpio_bank; -#define METHOD_GPIO_24XX 4 - /** * Check if gpio is valid. * @@ -39,4 +52,6 @@ extern const struct gpio_bank *const omap_gpio_bank; * @return 1 if ok, 0 on error */ int gpio_is_valid(int gpio); +#endif + #endif /* _GPIO_H_ */ diff --git a/arch/arm/include/asm/spl.h b/arch/arm/include/asm/spl.h index e5daf89..8acd7cd 100644 --- a/arch/arm/include/asm/spl.h +++ b/arch/arm/include/asm/spl.h @@ -7,7 +7,7 @@ #ifndef _ASM_SPL_H_ #define _ASM_SPL_H_ -#if defined(CONFIG_OMAP) || defined(CONFIG_SOCFPGA) \ +#if defined(CONFIG_OMAP) \ || defined(CONFIG_EXYNOS4) || defined(CONFIG_EXYNOS5) \ || defined(CONFIG_EXYNOS4210) /* Platform-specific defines */ diff --git a/arch/arm/include/asm/u-boot-arm.h b/arch/arm/include/asm/u-boot-arm.h index b16694c..f97f3dd 100644 --- a/arch/arm/include/asm/u-boot-arm.h +++ b/arch/arm/include/asm/u-boot-arm.h @@ -45,4 +45,19 @@ void reset_timer_masked (void); ulong get_timer_masked (void); void udelay_masked (unsigned long usec); +/* calls to c from vectors.S */ +void bad_mode(void); +void do_undefined_instruction(struct pt_regs *pt_regs); +void do_software_interrupt(struct pt_regs *pt_regs); +void do_prefetch_abort(struct pt_regs *pt_regs); +void do_data_abort(struct pt_regs *pt_regs); +void do_not_used(struct pt_regs *pt_regs); +#ifdef CONFIG_ARM64 +void do_fiq(struct pt_regs *pt_regs, unsigned int esr); +void do_irq(struct pt_regs *pt_regs, unsigned int esr); +#else +void do_fiq(struct pt_regs *pt_regs); +void do_irq(struct pt_regs *pt_regswq); +#endif + #endif /* _U_BOOT_ARM_H_ */ diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index 76adaf3..f606255 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -34,6 +34,7 @@ #include <onenand_uboot.h> #include <mmc.h> #include <scsi.h> +#include <status_led.h> #include <libfdt.h> #include <fdtdec.h> #include <post.h> @@ -63,25 +64,15 @@ extern void dataflash_print_info(void); ************************************************************************ * May be supplied by boards if desired */ -inline void __coloured_LED_init(void) {} -void coloured_LED_init(void) - __attribute__((weak, alias("__coloured_LED_init"))); -inline void __red_led_on(void) {} -void red_led_on(void) __attribute__((weak, alias("__red_led_on"))); -inline void __red_led_off(void) {} -void red_led_off(void) __attribute__((weak, alias("__red_led_off"))); -inline void __green_led_on(void) {} -void green_led_on(void) __attribute__((weak, alias("__green_led_on"))); -inline void __green_led_off(void) {} -void green_led_off(void) __attribute__((weak, alias("__green_led_off"))); -inline void __yellow_led_on(void) {} -void yellow_led_on(void) __attribute__((weak, alias("__yellow_led_on"))); -inline void __yellow_led_off(void) {} -void yellow_led_off(void) __attribute__((weak, alias("__yellow_led_off"))); -inline void __blue_led_on(void) {} -void blue_led_on(void) __attribute__((weak, alias("__blue_led_on"))); -inline void __blue_led_off(void) {} -void blue_led_off(void) __attribute__((weak, alias("__blue_led_off"))); +__weak void coloured_LED_init(void) {} +__weak void red_led_on(void) {} +__weak void red_led_off(void) {} +__weak void green_led_on(void) {} +__weak void green_led_off(void) {} +__weak void yellow_led_on(void) {} +__weak void yellow_led_off(void) {} +__weak void blue_led_on(void) {} +__weak void blue_led_off(void) {} /* ************************************************************************ @@ -198,27 +189,21 @@ static int arm_pci_init(void) */ typedef int (init_fnc_t) (void); -void __dram_init_banksize(void) +__weak void dram_init_banksize(void) { gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; gd->bd->bi_dram[0].size = gd->ram_size; } -void dram_init_banksize(void) - __attribute__((weak, alias("__dram_init_banksize"))); -int __arch_cpu_init(void) +__weak int arch_cpu_init(void) { return 0; } -int arch_cpu_init(void) - __attribute__((weak, alias("__arch_cpu_init"))); -int __power_init_board(void) +__weak int power_init_board(void) { return 0; } -int power_init_board(void) - __attribute__((weak, alias("__power_init_board"))); /* Record the board_init_f() bootstage (after arch_cpu_init()) */ static int mark_bootstage(void) diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c index 39fe7a1..0d19c8a 100644 --- a/arch/arm/lib/bootm.c +++ b/arch/arm/lib/bootm.c @@ -15,6 +15,7 @@ #include <common.h> #include <command.h> #include <image.h> +#include <vxworks.h> #include <u-boot/zlib.h> #include <asm/byteorder.h> #include <libfdt.h> diff --git a/arch/arm/lib/interrupts.c b/arch/arm/lib/interrupts.c index f6b7c03..9019736 100644 --- a/arch/arm/lib/interrupts.c +++ b/arch/arm/lib/interrupts.c @@ -21,6 +21,7 @@ #include <common.h> #include <asm/proc-armv/ptrace.h> +#include <asm/u-boot-arm.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/arm/mvebu-common/Makefile b/arch/arm/mvebu-common/Makefile new file mode 100644 index 0000000..9dcab69 --- /dev/null +++ b/arch/arm/mvebu-common/Makefile @@ -0,0 +1,12 @@ +# +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Written-by: Prafulla Wadaskar <prafulla@marvell.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y = dram.o +obj-y += gpio.o +obj-$(CONFIG_ARMADA_XP) += mbus.o +obj-y += timer.o diff --git a/arch/arm/cpu/arm926ejs/kirkwood/dram.c b/arch/arm/mvebu-common/dram.c index d73ae47..db18791 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/dram.c +++ b/arch/arm/mvebu-common/dram.c @@ -10,31 +10,31 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/cpu.h> -#include <asm/arch/kirkwood.h> +#include <asm/arch/soc.h> DECLARE_GLOBAL_DATA_PTR; -struct kw_sdram_bank { +struct sdram_bank { u32 win_bar; u32 win_sz; }; -struct kw_sdram_addr_dec { - struct kw_sdram_bank sdram_bank[4]; +struct sdram_addr_dec { + struct sdram_bank sdram_bank[4]; }; -#define KW_REG_CPUCS_WIN_ENABLE (1 << 0) -#define KW_REG_CPUCS_WIN_WR_PROTECT (1 << 1) -#define KW_REG_CPUCS_WIN_WIN0_CS(x) (((x) & 0x3) << 2) -#define KW_REG_CPUCS_WIN_SIZE(x) (((x) & 0xff) << 24) +#define REG_CPUCS_WIN_ENABLE (1 << 0) +#define REG_CPUCS_WIN_WR_PROTECT (1 << 1) +#define REG_CPUCS_WIN_WIN0_CS(x) (((x) & 0x3) << 2) +#define REG_CPUCS_WIN_SIZE(x) (((x) & 0xff) << 24) /* - * kw_sdram_bar - reads SDRAM Base Address Register + * mvebu_sdram_bar - reads SDRAM Base Address Register */ -u32 kw_sdram_bar(enum memory_bank bank) +u32 mvebu_sdram_bar(enum memory_bank bank) { - struct kw_sdram_addr_dec *base = - (struct kw_sdram_addr_dec *)KW_REGISTER(0x1500); + struct sdram_addr_dec *base = + (struct sdram_addr_dec *)MVEBU_SDRAM_BASE; u32 result = 0; u32 enable = 0x01 & readl(&base->sdram_bank[bank].win_sz); @@ -46,31 +46,31 @@ u32 kw_sdram_bar(enum memory_bank bank) } /* - * kw_sdram_bs_set - writes SDRAM Bank size + * mvebu_sdram_bs_set - writes SDRAM Bank size */ -static void kw_sdram_bs_set(enum memory_bank bank, u32 size) +static void mvebu_sdram_bs_set(enum memory_bank bank, u32 size) { - struct kw_sdram_addr_dec *base = - (struct kw_sdram_addr_dec *)KW_REGISTER(0x1500); + struct sdram_addr_dec *base = + (struct sdram_addr_dec *)MVEBU_SDRAM_BASE; /* Read current register value */ u32 reg = readl(&base->sdram_bank[bank].win_sz); /* Clear window size */ - reg &= ~KW_REG_CPUCS_WIN_SIZE(0xFF); + reg &= ~REG_CPUCS_WIN_SIZE(0xFF); /* Set new window size */ - reg |= KW_REG_CPUCS_WIN_SIZE((size - 1) >> 24); + reg |= REG_CPUCS_WIN_SIZE((size - 1) >> 24); writel(reg, &base->sdram_bank[bank].win_sz); } /* - * kw_sdram_bs - reads SDRAM Bank size + * mvebu_sdram_bs - reads SDRAM Bank size */ -u32 kw_sdram_bs(enum memory_bank bank) +u32 mvebu_sdram_bs(enum memory_bank bank) { - struct kw_sdram_addr_dec *base = - (struct kw_sdram_addr_dec *)KW_REGISTER(0x1500); + struct sdram_addr_dec *base = + (struct sdram_addr_dec *)MVEBU_SDRAM_BASE; u32 result = 0; u32 enable = 0x01 & readl(&base->sdram_bank[bank].win_sz); @@ -81,15 +81,16 @@ u32 kw_sdram_bs(enum memory_bank bank) return result; } -void kw_sdram_size_adjust(enum memory_bank bank) +void mvebu_sdram_size_adjust(enum memory_bank bank) { u32 size; /* probe currently equipped RAM size */ - size = get_ram_size((void *)kw_sdram_bar(bank), kw_sdram_bs(bank)); + size = get_ram_size((void *)mvebu_sdram_bar(bank), + mvebu_sdram_bs(bank)); /* adjust SDRAM window size accordingly */ - kw_sdram_bs_set(bank, size); + mvebu_sdram_bs_set(bank, size); } #ifndef CONFIG_SYS_BOARD_DRAM_INIT @@ -99,8 +100,8 @@ int dram_init(void) gd->ram_size = 0; for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { - gd->bd->bi_dram[i].start = kw_sdram_bar(i); - gd->bd->bi_dram[i].size = kw_sdram_bs(i); + gd->bd->bi_dram[i].start = mvebu_sdram_bar(i); + gd->bd->bi_dram[i].size = mvebu_sdram_bs(i); /* * It is assumed that all memory banks are consecutive * and without gaps. @@ -110,7 +111,13 @@ int dram_init(void) if (gd->bd->bi_dram[i].start != gd->ram_size) break; - gd->ram_size += gd->bd->bi_dram[i].size; + /* + * Don't report more than 3GiB of SDRAM, otherwise there is no + * address space left for the internal registers etc. + */ + if ((gd->ram_size + gd->bd->bi_dram[i].size != 0) && + (gd->ram_size + gd->bd->bi_dram[i].size <= (3 << 30))) + gd->ram_size += gd->bd->bi_dram[i].size; } diff --git a/arch/arm/mvebu-common/gpio.c b/arch/arm/mvebu-common/gpio.c new file mode 100644 index 0000000..56e54e0 --- /dev/null +++ b/arch/arm/mvebu-common/gpio.c @@ -0,0 +1,30 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +/* + * mvebu_config_gpio - GPIO configuration + */ +void mvebu_config_gpio(u32 gpp0_oe_val, u32 gpp1_oe_val, + u32 gpp0_oe, u32 gpp1_oe) +{ + struct kwgpio_registers *gpio0reg = + (struct kwgpio_registers *)MVEBU_GPIO0_BASE; + struct kwgpio_registers *gpio1reg = + (struct kwgpio_registers *)MVEBU_GPIO1_BASE; + + /* Init GPIOS to default values as per board requirement */ + writel(gpp0_oe_val, &gpio0reg->dout); + writel(gpp1_oe_val, &gpio1reg->dout); + writel(gpp0_oe, &gpio0reg->oe); + writel(gpp1_oe, &gpio1reg->oe); +} diff --git a/arch/arm/mvebu-common/mbus.c b/arch/arm/mvebu-common/mbus.c new file mode 100644 index 0000000..05c9ef2 --- /dev/null +++ b/arch/arm/mvebu-common/mbus.c @@ -0,0 +1,471 @@ +/* + * Address map functions for Marvell EBU SoCs (Kirkwood, Armada + * 370/XP, Dove, Orion5x and MV78xx0) + * + * Ported from the Barebox version to U-Boot by: + * Stefan Roese <sr@denx.de> + * + * The Barebox version is: + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * + * based on mbus driver from Linux + * (C) Copyright 2008 Marvell Semiconductor + * + * SPDX-License-Identifier: GPL-2.0 + * + * The Marvell EBU SoCs have a configurable physical address space: + * the physical address at which certain devices (PCIe, NOR, NAND, + * etc.) sit can be configured. The configuration takes place through + * two sets of registers: + * + * - One to configure the access of the CPU to the devices. Depending + * on the families, there are between 8 and 20 configurable windows, + * each can be use to create a physical memory window that maps to a + * specific device. Devices are identified by a tuple (target, + * attribute). + * + * - One to configure the access to the CPU to the SDRAM. There are + * either 2 (for Dove) or 4 (for other families) windows to map the + * SDRAM into the physical address space. + * + * This driver: + * + * - Reads out the SDRAM address decoding windows at initialization + * time, and fills the mbus_dram_info structure with these + * informations. The exported function mv_mbus_dram_info() allow + * device drivers to get those informations related to the SDRAM + * address decoding windows. This is because devices also have their + * own windows (configured through registers that are part of each + * device register space), and therefore the drivers for Marvell + * devices have to configure those device -> SDRAM windows to ensure + * that DMA works properly. + * + * - Provides an API for platform code or device drivers to + * dynamically add or remove address decoding windows for the CPU -> + * device accesses. This API is mvebu_mbus_add_window_by_id(), + * mvebu_mbus_add_window_remap_by_id() and + * mvebu_mbus_del_window(). + */ + +#include <common.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> +#include <linux/mbus.h> + +#define BIT(nr) (1UL << (nr)) + +/* DDR target is the same on all platforms */ +#define TARGET_DDR 0 + +/* CPU Address Decode Windows registers */ +#define WIN_CTRL_OFF 0x0000 +#define WIN_CTRL_ENABLE BIT(0) +#define WIN_CTRL_TGT_MASK 0xf0 +#define WIN_CTRL_TGT_SHIFT 4 +#define WIN_CTRL_ATTR_MASK 0xff00 +#define WIN_CTRL_ATTR_SHIFT 8 +#define WIN_CTRL_SIZE_MASK 0xffff0000 +#define WIN_CTRL_SIZE_SHIFT 16 +#define WIN_BASE_OFF 0x0004 +#define WIN_BASE_LOW 0xffff0000 +#define WIN_BASE_HIGH 0xf +#define WIN_REMAP_LO_OFF 0x0008 +#define WIN_REMAP_LOW 0xffff0000 +#define WIN_REMAP_HI_OFF 0x000c + +#define ATTR_HW_COHERENCY (0x1 << 4) + +#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3)) +#define DDR_BASE_CS_HIGH_MASK 0xf +#define DDR_BASE_CS_LOW_MASK 0xff000000 +#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3)) +#define DDR_SIZE_ENABLED BIT(0) +#define DDR_SIZE_CS_MASK 0x1c +#define DDR_SIZE_CS_SHIFT 2 +#define DDR_SIZE_MASK 0xff000000 + +#define DOVE_DDR_BASE_CS_OFF(n) ((n) << 4) + +struct mvebu_mbus_state; + +struct mvebu_mbus_soc_data { + unsigned int num_wins; + unsigned int num_remappable_wins; + unsigned int (*win_cfg_offset)(const int win); + void (*setup_cpu_target)(struct mvebu_mbus_state *s); +}; + +struct mvebu_mbus_state mbus_state + __attribute__ ((section(".data"))); +static struct mbus_dram_target_info mbus_dram_info + __attribute__ ((section(".data"))); + +/* + * Functions to manipulate the address decoding windows + */ + +static void mvebu_mbus_read_window(struct mvebu_mbus_state *mbus, + int win, int *enabled, u64 *base, + u32 *size, u8 *target, u8 *attr, + u64 *remap) +{ + void __iomem *addr = mbus->mbuswins_base + + mbus->soc->win_cfg_offset(win); + u32 basereg = readl(addr + WIN_BASE_OFF); + u32 ctrlreg = readl(addr + WIN_CTRL_OFF); + + if (!(ctrlreg & WIN_CTRL_ENABLE)) { + *enabled = 0; + return; + } + + *enabled = 1; + *base = ((u64)basereg & WIN_BASE_HIGH) << 32; + *base |= (basereg & WIN_BASE_LOW); + *size = (ctrlreg | ~WIN_CTRL_SIZE_MASK) + 1; + + if (target) + *target = (ctrlreg & WIN_CTRL_TGT_MASK) >> WIN_CTRL_TGT_SHIFT; + + if (attr) + *attr = (ctrlreg & WIN_CTRL_ATTR_MASK) >> WIN_CTRL_ATTR_SHIFT; + + if (remap) { + if (win < mbus->soc->num_remappable_wins) { + u32 remap_low = readl(addr + WIN_REMAP_LO_OFF); + u32 remap_hi = readl(addr + WIN_REMAP_HI_OFF); + *remap = ((u64)remap_hi << 32) | remap_low; + } else { + *remap = 0; + } + } +} + +static void mvebu_mbus_disable_window(struct mvebu_mbus_state *mbus, + int win) +{ + void __iomem *addr; + + addr = mbus->mbuswins_base + mbus->soc->win_cfg_offset(win); + + writel(0, addr + WIN_BASE_OFF); + writel(0, addr + WIN_CTRL_OFF); + if (win < mbus->soc->num_remappable_wins) { + writel(0, addr + WIN_REMAP_LO_OFF); + writel(0, addr + WIN_REMAP_HI_OFF); + } +} + +/* Checks whether the given window number is available */ +static int mvebu_mbus_window_is_free(struct mvebu_mbus_state *mbus, + const int win) +{ + void __iomem *addr = mbus->mbuswins_base + + mbus->soc->win_cfg_offset(win); + u32 ctrl = readl(addr + WIN_CTRL_OFF); + return !(ctrl & WIN_CTRL_ENABLE); +} + +/* + * Checks whether the given (base, base+size) area doesn't overlap an + * existing region + */ +static int mvebu_mbus_window_conflicts(struct mvebu_mbus_state *mbus, + phys_addr_t base, size_t size, + u8 target, u8 attr) +{ + u64 end = (u64)base + size; + int win; + + for (win = 0; win < mbus->soc->num_wins; win++) { + u64 wbase, wend; + u32 wsize; + u8 wtarget, wattr; + int enabled; + + mvebu_mbus_read_window(mbus, win, + &enabled, &wbase, &wsize, + &wtarget, &wattr, NULL); + + if (!enabled) + continue; + + wend = wbase + wsize; + + /* + * Check if the current window overlaps with the + * proposed physical range + */ + if ((u64)base < wend && end > wbase) + return 0; + + /* + * Check if target/attribute conflicts + */ + if (target == wtarget && attr == wattr) + return 0; + } + + return 1; +} + +static int mvebu_mbus_find_window(struct mvebu_mbus_state *mbus, + phys_addr_t base, size_t size) +{ + int win; + + for (win = 0; win < mbus->soc->num_wins; win++) { + u64 wbase; + u32 wsize; + int enabled; + + mvebu_mbus_read_window(mbus, win, + &enabled, &wbase, &wsize, + NULL, NULL, NULL); + + if (!enabled) + continue; + + if (base == wbase && size == wsize) + return win; + } + + return -ENODEV; +} + +static int mvebu_mbus_setup_window(struct mvebu_mbus_state *mbus, + int win, phys_addr_t base, size_t size, + phys_addr_t remap, u8 target, + u8 attr) +{ + void __iomem *addr = mbus->mbuswins_base + + mbus->soc->win_cfg_offset(win); + u32 ctrl, remap_addr; + + ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) | + (attr << WIN_CTRL_ATTR_SHIFT) | + (target << WIN_CTRL_TGT_SHIFT) | + WIN_CTRL_ENABLE; + + writel(base & WIN_BASE_LOW, addr + WIN_BASE_OFF); + writel(ctrl, addr + WIN_CTRL_OFF); + if (win < mbus->soc->num_remappable_wins) { + if (remap == MVEBU_MBUS_NO_REMAP) + remap_addr = base; + else + remap_addr = remap; + writel(remap_addr & WIN_REMAP_LOW, addr + WIN_REMAP_LO_OFF); + writel(0, addr + WIN_REMAP_HI_OFF); + } + + return 0; +} + +static int mvebu_mbus_alloc_window(struct mvebu_mbus_state *mbus, + phys_addr_t base, size_t size, + phys_addr_t remap, u8 target, + u8 attr) +{ + int win; + + if (remap == MVEBU_MBUS_NO_REMAP) { + for (win = mbus->soc->num_remappable_wins; + win < mbus->soc->num_wins; win++) + if (mvebu_mbus_window_is_free(mbus, win)) + return mvebu_mbus_setup_window(mbus, win, base, + size, remap, + target, attr); + } + + + for (win = 0; win < mbus->soc->num_wins; win++) + if (mvebu_mbus_window_is_free(mbus, win)) + return mvebu_mbus_setup_window(mbus, win, base, size, + remap, target, attr); + + return -ENOMEM; +} + +/* + * SoC-specific functions and definitions + */ + +static unsigned int armada_370_xp_mbus_win_offset(int win) +{ + /* The register layout is a bit annoying and the below code + * tries to cope with it. + * - At offset 0x0, there are the registers for the first 8 + * windows, with 4 registers of 32 bits per window (ctrl, + * base, remap low, remap high) + * - Then at offset 0x80, there is a hole of 0x10 bytes for + * the internal registers base address and internal units + * sync barrier register. + * - Then at offset 0x90, there the registers for 12 + * windows, with only 2 registers of 32 bits per window + * (ctrl, base). + */ + if (win < 8) + return win << 4; + else + return 0x90 + ((win - 8) << 3); +} + +static unsigned int orion5x_mbus_win_offset(int win) +{ + return win << 4; +} + +static void mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus) +{ + int i; + int cs; + + mbus_dram_info.mbus_dram_target_id = TARGET_DDR; + + for (i = 0, cs = 0; i < 4; i++) { + u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i)); + u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i)); + + /* + * We only take care of entries for which the chip + * select is enabled, and that don't have high base + * address bits set (devices can only access the first + * 32 bits of the memory). + */ + if ((size & DDR_SIZE_ENABLED) && + !(base & DDR_BASE_CS_HIGH_MASK)) { + struct mbus_dram_window *w; + + w = &mbus_dram_info.cs[cs++]; + w->cs_index = i; + w->mbus_attr = 0xf & ~(1 << i); +#if defined(CONFIG_ARMADA_XP) + w->mbus_attr |= ATTR_HW_COHERENCY; +#endif + w->base = base & DDR_BASE_CS_LOW_MASK; + w->size = (size | ~DDR_SIZE_MASK) + 1; + } + } + mbus_dram_info.num_cs = cs; +} + +static const struct mvebu_mbus_soc_data +armada_370_xp_mbus_data __maybe_unused = { + .num_wins = 20, + .num_remappable_wins = 8, + .win_cfg_offset = armada_370_xp_mbus_win_offset, + .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, +}; + +static const struct mvebu_mbus_soc_data +kirkwood_mbus_data __maybe_unused = { + .num_wins = 8, + .num_remappable_wins = 4, + .win_cfg_offset = orion5x_mbus_win_offset, + .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, +}; + +/* + * Public API of the driver + */ +const struct mbus_dram_target_info *mvebu_mbus_dram_info(void) +{ + return &mbus_dram_info; +} + +int mvebu_mbus_add_window_remap_by_id(unsigned int target, + unsigned int attribute, + phys_addr_t base, size_t size, + phys_addr_t remap) +{ + struct mvebu_mbus_state *s = &mbus_state; + + if (!mvebu_mbus_window_conflicts(s, base, size, target, attribute)) { + printf("Cannot add window '%x:%x', conflicts with another window\n", + target, attribute); + return -EINVAL; + } + + return mvebu_mbus_alloc_window(s, base, size, remap, target, attribute); +} + +int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute, + phys_addr_t base, size_t size) +{ + return mvebu_mbus_add_window_remap_by_id(target, attribute, base, + size, MVEBU_MBUS_NO_REMAP); +} + +int mvebu_mbus_del_window(phys_addr_t base, size_t size) +{ + int win; + + win = mvebu_mbus_find_window(&mbus_state, base, size); + if (win < 0) + return win; + + mvebu_mbus_disable_window(&mbus_state, win); + return 0; +} + +int mbus_dt_setup_win(struct mvebu_mbus_state *mbus, + u32 base, u32 size, u8 target, u8 attr) +{ + if (!mvebu_mbus_window_conflicts(mbus, base, size, target, attr)) { + printf("Cannot add window '%04x:%04x', conflicts with another window\n", + target, attr); + return -EBUSY; + } + + /* + * In U-Boot we first try to add the mbus window to the remap windows. + * If this fails, lets try to add the windows to the non-remap windows. + */ + if (mvebu_mbus_alloc_window(mbus, base, size, base, target, attr)) { + if (mvebu_mbus_alloc_window(mbus, base, size, + MVEBU_MBUS_NO_REMAP, target, attr)) + return -ENOMEM; + } + + return 0; +} + +int mvebu_mbus_probe(struct mbus_win windows[], int count) +{ + int win; + int ret; + int i; + +#if defined(CONFIG_KIRKWOOD) + mbus_state.soc = &kirkwood_mbus_data; +#endif +#if defined(CONFIG_ARMADA_XP) + mbus_state.soc = &armada_370_xp_mbus_data; +#endif + + mbus_state.mbuswins_base = (void __iomem *)MVEBU_CPU_WIN_BASE; + mbus_state.sdramwins_base = (void __iomem *)MVEBU_SDRAM_BASE; + + for (win = 0; win < mbus_state.soc->num_wins; win++) + mvebu_mbus_disable_window(&mbus_state, win); + + mbus_state.soc->setup_cpu_target(&mbus_state); + + /* Setup statically declared windows in the DT */ + for (i = 0; i < count; i++) { + u32 base, size; + u8 target, attr; + + target = windows[i].target; + attr = windows[i].attr; + base = windows[i].base; + size = windows[i].size; + ret = mbus_dt_setup_win(&mbus_state, base, size, target, attr); + if (ret < 0) + return ret; + } + + return 0; +} diff --git a/arch/arm/cpu/arm926ejs/kirkwood/timer.c b/arch/arm/mvebu-common/timer.c index a08f4a1..40c4bc2 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/timer.c +++ b/arch/arm/mvebu-common/timer.c @@ -7,75 +7,68 @@ #include <common.h> #include <asm/io.h> -#include <asm/arch/kirkwood.h> +#include <asm/arch/soc.h> -#define UBOOT_CNTR 0 /* counter to use for uboot timer */ - -/* Timer reload and current value registers */ -struct kwtmr_val { - u32 reload; /* Timer reload reg */ - u32 val; /* Timer value reg */ -}; - -/* Timer registers */ -struct kwtmr_registers { - u32 ctrl; /* Timer control reg */ - u32 pad[3]; - struct kwtmr_val tmr[2]; - u32 wdt_reload; - u32 wdt_val; -}; - -struct kwtmr_registers *kwtmr_regs = (struct kwtmr_registers *)KW_TIMER_BASE; +#define UBOOT_CNTR 0 /* counter to use for U-Boot timer */ /* * ARM Timers Registers Map */ -#define CNTMR_CTRL_REG &kwtmr_regs->ctrl -#define CNTMR_RELOAD_REG(tmrnum) &kwtmr_regs->tmr[tmrnum].reload -#define CNTMR_VAL_REG(tmrnum) &kwtmr_regs->tmr[tmrnum].val +#define CNTMR_CTRL_REG &tmr_regs->ctrl +#define CNTMR_RELOAD_REG(tmrnum) &tmr_regs->tmr[tmrnum].reload +#define CNTMR_VAL_REG(tmrnum) &tmr_regs->tmr[tmrnum].val /* * ARM Timers Control Register * CPU_TIMERS_CTRL_REG (CTCR) */ #define CTCR_ARM_TIMER_EN_OFFS(cntr) (cntr * 2) -#define CTCR_ARM_TIMER_EN_MASK(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS) #define CTCR_ARM_TIMER_EN(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS(cntr)) -#define CTCR_ARM_TIMER_DIS(cntr) (0 << CTCR_ARM_TIMER_EN_OFFS(cntr)) #define CTCR_ARM_TIMER_AUTO_OFFS(cntr) ((cntr * 2) + 1) -#define CTCR_ARM_TIMER_AUTO_MASK(cntr) (1 << 1) #define CTCR_ARM_TIMER_AUTO_EN(cntr) (1 << CTCR_ARM_TIMER_AUTO_OFFS(cntr)) -#define CTCR_ARM_TIMER_AUTO_DIS(cntr) (0 << CTCR_ARM_TIMER_AUTO_OFFS(cntr)) -/* - * ARM Timer\Watchdog Reload Register - * CNTMR_RELOAD_REG (TRR) - */ -#define TRG_ARM_TIMER_REL_OFFS 0 -#define TRG_ARM_TIMER_REL_MASK 0xffffffff +/* Only Armada XP have the 25MHz enable bit (Kirkwood doesn't) */ +#if defined(CONFIG_ARMADA_XP) +#define CTCR_ARM_TIMER_25MHZ_OFFS(cntr) (cntr + 11) +#define CTCR_ARM_TIMER_25MHZ(cntr) (1 << CTCR_ARM_TIMER_25MHZ_OFFS(cntr)) +#else +#define CTCR_ARM_TIMER_25MHZ(cntr) 0 +#endif -/* - * ARM Timer\Watchdog Register - * CNTMR_VAL_REG (TVRG) - */ -#define TVR_ARM_TIMER_OFFS 0 -#define TVR_ARM_TIMER_MASK 0xffffffff -#define TVR_ARM_TIMER_MAX 0xffffffff #define TIMER_LOAD_VAL 0xffffffff -#define READ_TIMER (readl(CNTMR_VAL_REG(UBOOT_CNTR)) / \ - (CONFIG_SYS_TCLK / 1000)) +#define timestamp gd->arch.tbl +#define lastdec gd->arch.lastinc + +/* Timer reload and current value registers */ +struct kwtmr_val { + u32 reload; /* Timer reload reg */ + u32 val; /* Timer value reg */ +}; + +/* Timer registers */ +struct kwtmr_registers { + u32 ctrl; /* Timer control reg */ + u32 pad[3]; + struct kwtmr_val tmr[4]; + u32 wdt_reload; + u32 wdt_val; +}; DECLARE_GLOBAL_DATA_PTR; -#define timestamp gd->arch.tbl -#define lastdec gd->arch.lastinc +static struct kwtmr_registers *tmr_regs = + (struct kwtmr_registers *)MVEBU_TIMER_BASE; + +static inline ulong read_timer(void) +{ + return readl(CNTMR_VAL_REG(UBOOT_CNTR)) / (CONFIG_SYS_TCLK / 1000); +} ulong get_timer_masked(void) { - ulong now = READ_TIMER; + ulong now = read_timer(); if (lastdec >= now) { /* normal mode */ @@ -119,20 +112,17 @@ void __udelay(unsigned long usec) */ int timer_init(void) { - unsigned int cntmrctrl; - /* load value into timer */ writel(TIMER_LOAD_VAL, CNTMR_RELOAD_REG(UBOOT_CNTR)); writel(TIMER_LOAD_VAL, CNTMR_VAL_REG(UBOOT_CNTR)); /* enable timer in auto reload mode */ - cntmrctrl = readl(CNTMR_CTRL_REG); - cntmrctrl |= CTCR_ARM_TIMER_EN(UBOOT_CNTR); - cntmrctrl |= CTCR_ARM_TIMER_AUTO_EN(UBOOT_CNTR); - writel(cntmrctrl, CNTMR_CTRL_REG); + clrsetbits_le32(CNTMR_CTRL_REG, CTCR_ARM_TIMER_25MHZ(UBOOT_CNTR), + CTCR_ARM_TIMER_EN(UBOOT_CNTR) | + CTCR_ARM_TIMER_AUTO_EN(UBOOT_CNTR)); /* init the timestamp and lastdec value */ - lastdec = READ_TIMER; + lastdec = read_timer(); timestamp = 0; return 0; diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 7686b77..9b72bab 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -4,6 +4,9 @@ menu "MIPS architecture" config SYS_ARCH default "mips" +config USE_PRIVATE_LIBGCC + default y + choice prompt "Target select" diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index ff9935a..0dba8ac 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -4,6 +4,9 @@ menu "x86 architecture" config SYS_ARCH default "x86" +config USE_PRIVATE_LIBGCC + default y + choice prompt "Target select" diff --git a/arch/x86/config.mk b/arch/x86/config.mk index 3106079..3e7fedb 100644 --- a/arch/x86/config.mk +++ b/arch/x86/config.mk @@ -28,6 +28,3 @@ PLATFORM_LDFLAGS += --emit-relocs -Bsymbolic -Bsymbolic-functions -m elf_i386 LDFLAGS_FINAL += --gc-sections -pie LDFLAGS_FINAL += --wrap=__divdi3 --wrap=__udivdi3 LDFLAGS_FINAL += --wrap=__moddi3 --wrap=__umoddi3 - -export NORMAL_LIBGCC = $(shell $(CC) $(PLATFORM_CPPFLAGS) -print-libgcc-file-name) -CONFIG_USE_PRIVATE_LIBGCC := arch/x86/lib diff --git a/arch/x86/cpu/start.S b/arch/x86/cpu/start.S index 329bb3a..338bab1 100644 --- a/arch/x86/cpu/start.S +++ b/arch/x86/cpu/start.S @@ -85,12 +85,25 @@ car_init_ret: /* Align global data to 16-byte boundary */ andl $0xfffffff0, %esp + /* Zero the global data since it won't happen later */ + xorl %eax, %eax + movl $GENERATED_GBL_DATA_SIZE, %ecx + movl %esp, %edi + rep stosb + /* Setup first parameter to setup_gdt */ movl %esp, %eax /* Reserve space for global descriptor table */ subl $X86_GDT_SIZE, %esp +#if defined(CONFIG_SYS_MALLOC_F_LEN) + subl $CONFIG_SYS_MALLOC_F_LEN, %esp + movl %eax, %edx + addl $GD_MALLOC_BASE, %edx + movl %esp, (%edx) +#endif + /* Align temporary global descriptor table to 16-byte boundary */ andl $0xfffffff0, %esp diff --git a/arch/x86/dts/coreboot.dtsi b/arch/x86/dts/coreboot.dtsi index 4862a59..c8dc4ce 100644 --- a/arch/x86/dts/coreboot.dtsi +++ b/arch/x86/dts/coreboot.dtsi @@ -1,13 +1,14 @@ /include/ "skeleton.dtsi" / { - aliases { - console = "/serial"; + chosen { + stdout-path = "/serial"; }; serial { - compatible = "ns16550"; - reg-shift = <1>; + compatible = "coreboot-uart"; + reg = <0x3f8 0x10>; + reg-shift = <0>; io-mapped = <1>; multiplier = <1>; baudrate = <115200>; diff --git a/arch/x86/dts/link.dts b/arch/x86/dts/link.dts index 4a37dac..f2fcb39 100644 --- a/arch/x86/dts/link.dts +++ b/arch/x86/dts/link.dts @@ -12,7 +12,23 @@ silent_console = <0>; }; - gpio: gpio {}; + gpioa { + compatible = "intel,ich6-gpio"; + reg = <0 0x10>; + bank-name = "A"; + }; + + gpiob { + compatible = "intel,ich6-gpio"; + reg = <0x30 0x10>; + bank-name = "B"; + }; + + gpioc { + compatible = "intel,ich6-gpio"; + reg = <0x40 0x10>; + bank-name = "C"; + }; serial { reg = <0x3f8 8>; @@ -32,4 +48,22 @@ memory-map = <0xff800000 0x00800000>; }; }; + + lpc { + compatible = "intel,lpc"; + #address-cells = <1>; + #size-cells = <1>; + cros-ec@200 { + compatible = "google,cros-ec"; + reg = <0x204 1 0x200 1 0x880 0x80>; + + /* This describes the flash memory within the EC */ + #address-cells = <1>; + #size-cells = <1>; + flash@8000000 { + reg = <0x08000000 0x20000>; + erase-value = <0xff>; + }; + }; + }; }; diff --git a/arch/x86/include/asm/arch-coreboot/gpio.h b/arch/x86/include/asm/arch-coreboot/gpio.h new file mode 100644 index 0000000..3ec1816 --- /dev/null +++ b/arch/x86/include/asm/arch-coreboot/gpio.h @@ -0,0 +1,15 @@ +/* + * Copyright (c) 2014, Google Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _X86_ARCH_GPIO_H_ +#define _X86_ARCH_GPIO_H_ + +struct ich6_bank_platdata { + uint32_t base_addr; + const char *bank_name; +}; + +#endif /* _X86_ARCH_GPIO_H_ */ diff --git a/arch/x86/include/asm/gpio.h b/arch/x86/include/asm/gpio.h index fe09f31..8bda414 100644 --- a/arch/x86/include/asm/gpio.h +++ b/arch/x86/include/asm/gpio.h @@ -6,6 +6,7 @@ #ifndef _X86_GPIO_H_ #define _X86_GPIO_H_ +#include <asm/arch/gpio.h> #include <asm-generic/gpio.h> #endif /* _X86_GPIO_H_ */ diff --git a/arch/x86/include/asm/ibmpc.h b/arch/x86/include/asm/ibmpc.h index 0f9665f..e6d183b 100644 --- a/arch/x86/include/asm/ibmpc.h +++ b/arch/x86/include/asm/ibmpc.h @@ -18,14 +18,4 @@ #define SYSCTLA 0x92 #define SLAVE_PIC 0xa0 -#if 1 -#define UART0_BASE 0x3f8 -#define UART1_BASE 0x2f8 -#else -/* FixMe: uarts swapped */ -#define UART0_BASE 0x2f8 -#define UART1_BASE 0x3f8 -#endif - - #endif diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index f7303ab..25b672a 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -20,9 +20,9 @@ obj-$(CONFIG_SYS_X86_TSC_TIMER) += tsc_timer.o obj-$(CONFIG_VIDEO_VGA) += video.o obj-$(CONFIG_CMD_ZBOOT) += zimage.o -LIBGCC := $(notdir $(NORMAL_LIBGCC)) -extra-y := $(LIBGCC) +extra-$(CONFIG_USE_PRIVATE_LIBGCC) := lib.a +NORMAL_LIBGCC = $(shell $(CC) $(PLATFORM_CPPFLAGS) -print-libgcc-file-name) OBJCOPYFLAGS := --prefix-symbols=__normal_ -$(obj)/$(LIBGCC): $(NORMAL_LIBGCC) FORCE +$(obj)/lib.a: $(NORMAL_LIBGCC) FORCE $(call if_changed,objcopy) diff --git a/arch/x86/lib/zimage.c b/arch/x86/lib/zimage.c index 2f0e92f..b190283 100644 --- a/arch/x86/lib/zimage.c +++ b/arch/x86/lib/zimage.c @@ -282,7 +282,6 @@ void boot_zimage(void *setup_base, void *load_address) :: [kernel_entry]"a"(load_address), [boot_params] "S"(setup_base), "b"(0), "D"(0) - : "%ebp" ); } |