diff options
Diffstat (limited to 'arch/x86')
-rw-r--r-- | arch/x86/cpu/ivybridge/lpc.c | 129 |
1 files changed, 66 insertions, 63 deletions
diff --git a/arch/x86/cpu/ivybridge/lpc.c b/arch/x86/cpu/ivybridge/lpc.c index 79224d9..0cf55c5 100644 --- a/arch/x86/cpu/ivybridge/lpc.c +++ b/arch/x86/cpu/ivybridge/lpc.c @@ -24,13 +24,13 @@ #define ENABLE_ACPI_MODE_IN_COREBOOT 0 #define TEST_SMM_FLASH_LOCKDOWN 0 -static int pch_enable_apic(pci_dev_t dev) +static int pch_enable_apic(struct udevice *pch) { u32 reg32; int i; /* Enable ACPI I/O and power management. Set SCI IRQ to IRQ9 */ - x86_pci_write_config8(dev, ACPI_CNTL, 0x80); + dm_pci_write_config8(pch, ACPI_CNTL, 0x80); writel(0, IO_APIC_INDEX); writel(1 << 25, IO_APIC_DATA); @@ -66,36 +66,36 @@ static int pch_enable_apic(pci_dev_t dev) return 0; } -static void pch_enable_serial_irqs(pci_dev_t dev) +static void pch_enable_serial_irqs(struct udevice *pch) { u32 value; /* Set packet length and toggle silent mode bit for one frame. */ value = (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0); #ifdef CONFIG_SERIRQ_CONTINUOUS_MODE - x86_pci_write_config8(dev, SERIRQ_CNTL, value); + dm_pci_write_config8(pch, SERIRQ_CNTL, value); #else - x86_pci_write_config8(dev, SERIRQ_CNTL, value | (1 << 6)); + dm_pci_write_config8(pch, SERIRQ_CNTL, value | (1 << 6)); #endif } -static int pch_pirq_init(const void *blob, int node, pci_dev_t dev) +static int pch_pirq_init(struct udevice *pch) { uint8_t route[8], *ptr; - if (fdtdec_get_byte_array(blob, node, "intel,pirq-routing", route, - sizeof(route))) + if (fdtdec_get_byte_array(gd->fdt_blob, pch->of_offset, + "intel,pirq-routing", route, sizeof(route))) return -EINVAL; ptr = route; - x86_pci_write_config8(dev, PIRQA_ROUT, *ptr++); - x86_pci_write_config8(dev, PIRQB_ROUT, *ptr++); - x86_pci_write_config8(dev, PIRQC_ROUT, *ptr++); - x86_pci_write_config8(dev, PIRQD_ROUT, *ptr++); + dm_pci_write_config8(pch, PIRQA_ROUT, *ptr++); + dm_pci_write_config8(pch, PIRQB_ROUT, *ptr++); + dm_pci_write_config8(pch, PIRQC_ROUT, *ptr++); + dm_pci_write_config8(pch, PIRQD_ROUT, *ptr++); - x86_pci_write_config8(dev, PIRQE_ROUT, *ptr++); - x86_pci_write_config8(dev, PIRQF_ROUT, *ptr++); - x86_pci_write_config8(dev, PIRQG_ROUT, *ptr++); - x86_pci_write_config8(dev, PIRQH_ROUT, *ptr++); + dm_pci_write_config8(pch, PIRQE_ROUT, *ptr++); + dm_pci_write_config8(pch, PIRQF_ROUT, *ptr++); + dm_pci_write_config8(pch, PIRQG_ROUT, *ptr++); + dm_pci_write_config8(pch, PIRQH_ROUT, *ptr++); /* * TODO(sjg@chromium.org): U-Boot does not set up the interrupts @@ -104,26 +104,28 @@ static int pch_pirq_init(const void *blob, int node, pci_dev_t dev) return 0; } -static int pch_gpi_routing(const void *blob, int node, pci_dev_t dev) +static int pch_gpi_routing(struct udevice *pch) { u8 route[16]; u32 reg; int gpi; - if (fdtdec_get_byte_array(blob, node, "intel,gpi-routing", route, - sizeof(route))) + if (fdtdec_get_byte_array(gd->fdt_blob, pch->of_offset, + "intel,gpi-routing", route, sizeof(route))) return -EINVAL; for (reg = 0, gpi = 0; gpi < ARRAY_SIZE(route); gpi++) reg |= route[gpi] << (gpi * 2); - x86_pci_write_config32(dev, 0xb8, reg); + dm_pci_write_config32(pch, 0xb8, reg); return 0; } -static int pch_power_options(const void *blob, int node, pci_dev_t dev) +static int pch_power_options(struct udevice *pch) { + const void *blob = gd->fdt_blob; + int node = pch->of_offset; u8 reg8; u16 reg16, pmbase; u32 reg32; @@ -142,7 +144,7 @@ static int pch_power_options(const void *blob, int node, pci_dev_t dev) */ pwr_on = MAINBOARD_POWER_ON; - reg16 = x86_pci_read_config16(dev, GEN_PMCON_3); + dm_pci_read_config16(pch, GEN_PMCON_3, ®16); reg16 &= 0xfffe; switch (pwr_on) { case MAINBOARD_POWER_OFF: @@ -169,7 +171,7 @@ static int pch_power_options(const void *blob, int node, pci_dev_t dev) reg16 |= (1 << 12); /* Disable SLP stretch after SUS well */ - x86_pci_write_config16(dev, GEN_PMCON_3, reg16); + dm_pci_write_config16(pch, GEN_PMCON_3, reg16); debug("Set power %s after power failure.\n", state); /* Set up NMI on errors. */ @@ -193,21 +195,22 @@ static int pch_power_options(const void *blob, int node, pci_dev_t dev) outb(reg8, 0x70); /* Enable CPU_SLP# and Intel Speedstep, set SMI# rate down */ - reg16 = x86_pci_read_config16(dev, GEN_PMCON_1); + dm_pci_read_config16(pch, GEN_PMCON_1, ®16); reg16 &= ~(3 << 0); /* SMI# rate 1 minute */ reg16 &= ~(1 << 10); /* Disable BIOS_PCI_EXP_EN for native PME */ #if DEBUG_PERIODIC_SMIS /* Set DEBUG_PERIODIC_SMIS in pch.h to debug using periodic SMIs */ reg16 |= (3 << 0); /* Periodic SMI every 8s */ #endif - x86_pci_write_config16(dev, GEN_PMCON_1, reg16); + dm_pci_write_config16(pch, GEN_PMCON_1, reg16); /* Set the board's GPI routing. */ - ret = pch_gpi_routing(blob, node, dev); + ret = pch_gpi_routing(pch); if (ret) return ret; - pmbase = x86_pci_read_config16(dev, 0x40) & 0xfffe; + dm_pci_read_config16(pch, 0x40, &pmbase); + pmbase &= 0xfffe; writel(pmbase + GPE0_EN, fdtdec_get_int(blob, node, "intel,gpe0-enable", 0)); @@ -227,16 +230,16 @@ static int pch_power_options(const void *blob, int node, pci_dev_t dev) return 0; } -static void pch_rtc_init(pci_dev_t dev) +static void pch_rtc_init(struct udevice *pch) { int rtc_failed; u8 reg8; - reg8 = x86_pci_read_config8(dev, GEN_PMCON_3); + dm_pci_read_config8(pch, GEN_PMCON_3, ®8); rtc_failed = reg8 & RTC_BATTERY_DEAD; if (rtc_failed) { reg8 &= ~RTC_BATTERY_DEAD; - x86_pci_write_config8(dev, GEN_PMCON_3, reg8); + dm_pci_write_config8(pch, GEN_PMCON_3, reg8); } debug("rtc_failed = 0x%x\n", rtc_failed); @@ -246,10 +249,10 @@ static void pch_rtc_init(pci_dev_t dev) } /* CougarPoint PCH Power Management init */ -static void cpt_pm_init(pci_dev_t dev) +static void cpt_pm_init(struct udevice *pch) { debug("CougarPoint PM init\n"); - x86_pci_write_config8(dev, 0xa9, 0x47); + dm_pci_write_config8(pch, 0xa9, 0x47); setbits_le32(RCB_REG(0x2238), (1 << 6) | (1 << 0)); setbits_le32(RCB_REG(0x228c), 1 << 0); @@ -290,10 +293,10 @@ static void cpt_pm_init(pci_dev_t dev) } /* PantherPoint PCH Power Management init */ -static void ppt_pm_init(pci_dev_t dev) +static void ppt_pm_init(struct udevice *pch) { debug("PantherPoint PM init\n"); - x86_pci_write_config8(dev, 0xa9, 0x47); + dm_pci_write_config8(pch, 0xa9, 0x47); setbits_le32(RCB_REG(0x2238), 1 << 0); setbits_le32(RCB_REG(0x228c), 1 << 0); setbits_le16(RCB_REG(0x1100), (1 << 13) | (1 << 14)); @@ -340,16 +343,16 @@ static void enable_hpet(void) clrsetbits_le32(RCB_REG(HPTC), 3 << 0, 1 << 7); } -static void enable_clock_gating(pci_dev_t dev) +static void enable_clock_gating(struct udevice *pch) { u32 reg32; u16 reg16; setbits_le32(RCB_REG(0x2234), 0xf); - reg16 = x86_pci_read_config16(dev, GEN_PMCON_1); + dm_pci_read_config16(pch, GEN_PMCON_1, ®16); reg16 |= (1 << 2) | (1 << 11); - x86_pci_write_config16(dev, GEN_PMCON_1, reg16); + dm_pci_write_config16(pch, GEN_PMCON_1, reg16); pch_iobp_update(0xEB007F07, ~0UL, (1 << 31)); pch_iobp_update(0xEB004000, ~0UL, (1 << 7)); @@ -429,24 +432,24 @@ static void pch_lock_smm(pci_dev_t dev) } #endif -static void pch_disable_smm_only_flashing(pci_dev_t dev) +static void pch_disable_smm_only_flashing(struct udevice *pch) { u8 reg8; debug("Enabling BIOS updates outside of SMM... "); - reg8 = x86_pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ + dm_pci_read_config8(pch, 0xdc, ®8); /* BIOS_CNTL */ reg8 &= ~(1 << 5); - x86_pci_write_config8(dev, 0xdc, reg8); + dm_pci_write_config8(pch, 0xdc, reg8); } -static void pch_fixups(pci_dev_t dev) +static void pch_fixups(struct udevice *pch) { u8 gen_pmcon_2; /* Indicate DRAM init done for MRC S3 to know it can resume */ - gen_pmcon_2 = x86_pci_read_config8(dev, GEN_PMCON_2); + dm_pci_read_config8(pch, GEN_PMCON_2, &gen_pmcon_2); gen_pmcon_2 |= (1 << 7); - x86_pci_write_config8(dev, GEN_PMCON_2, gen_pmcon_2); + dm_pci_write_config8(pch, GEN_PMCON_2, gen_pmcon_2); /* Enable DMI ASPM in the PCH */ clrbits_le32(RCB_REG(0x2304), 1 << 10); @@ -538,66 +541,66 @@ static int lpc_early_init(struct udevice *dev) return 0; } -static int lpc_init_extra(struct pci_controller *hose, pci_dev_t dev) +static int lpc_init_extra(struct udevice *dev) { + struct udevice *pch = dev->parent; const void *blob = gd->fdt_blob; int node; debug("pch: lpc_init\n"); - pci_write_bar32(hose, dev, 0, 0); - pci_write_bar32(hose, dev, 1, 0xff800000); - pci_write_bar32(hose, dev, 2, 0xfec00000); - pci_write_bar32(hose, dev, 3, 0x800); - pci_write_bar32(hose, dev, 4, 0x900); + dm_pci_write_bar32(pch, 0, 0); + dm_pci_write_bar32(pch, 1, 0xff800000); + dm_pci_write_bar32(pch, 2, 0xfec00000); + dm_pci_write_bar32(pch, 3, 0x800); + dm_pci_write_bar32(pch, 4, 0x900); node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_PCH); if (node < 0) return -ENOENT; /* Set the value for PCI command register. */ - x86_pci_write_config16(dev, PCI_COMMAND, 0x000f); + dm_pci_write_config16(pch, PCI_COMMAND, 0x000f); /* IO APIC initialization. */ - pch_enable_apic(dev); + pch_enable_apic(pch); - pch_enable_serial_irqs(dev); + pch_enable_serial_irqs(pch); /* Setup the PIRQ. */ - pch_pirq_init(blob, node, dev); + pch_pirq_init(pch); /* Setup power options. */ - pch_power_options(blob, node, dev); + pch_power_options(pch); /* Initialize power management */ switch (pch_silicon_type()) { case PCH_TYPE_CPT: /* CougarPoint */ - cpt_pm_init(dev); + cpt_pm_init(pch); break; case PCH_TYPE_PPT: /* PantherPoint */ - ppt_pm_init(dev); + ppt_pm_init(pch); break; default: - printf("Unknown Chipset: %#02x.%dx\n", PCI_DEV(dev), - PCI_FUNC(dev)); + printf("Unknown Chipset: %s\n", pch->name); return -ENOSYS; } /* Initialize the real time clock. */ - pch_rtc_init(dev); + pch_rtc_init(pch); /* Initialize the High Precision Event Timers, if present. */ enable_hpet(); /* Initialize Clock Gating */ - enable_clock_gating(dev); + enable_clock_gating(pch); - pch_disable_smm_only_flashing(dev); + pch_disable_smm_only_flashing(pch); #if CONFIG_HAVE_SMI_HANDLER pch_lock_smm(dev); #endif - pch_fixups(dev); + pch_fixups(pch); return 0; } @@ -636,7 +639,7 @@ static int bd82x6x_lpc_probe(struct udevice *dev) return bd82x6x_lpc_early_init(dev); } - return lpc_init_extra(pci_bus_to_hose(0), PCH_LPC_DEV); + return lpc_init_extra(dev); } static const struct udevice_id bd82x6x_lpc_ids[] = { |