summaryrefslogtreecommitdiff
path: root/arch/x86/cpu/qemu/pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/cpu/qemu/pci.c')
-rw-r--r--arch/x86/cpu/qemu/pci.c101
1 files changed, 101 insertions, 0 deletions
diff --git a/arch/x86/cpu/qemu/pci.c b/arch/x86/cpu/qemu/pci.c
new file mode 100644
index 0000000..1a9140b
--- /dev/null
+++ b/arch/x86/cpu/qemu/pci.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <pci_rom.h>
+#include <asm/pci.h>
+#include <asm/arch/device.h>
+#include <asm/arch/qemu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_pci_setup_hose(struct pci_controller *hose)
+{
+ hose->first_busno = 0;
+ hose->last_busno = 0;
+
+ /* PCI memory space */
+ pci_set_region(hose->regions + 0,
+ CONFIG_PCI_MEM_BUS,
+ CONFIG_PCI_MEM_PHYS,
+ CONFIG_PCI_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* PCI IO space */
+ pci_set_region(hose->regions + 1,
+ CONFIG_PCI_IO_BUS,
+ CONFIG_PCI_IO_PHYS,
+ CONFIG_PCI_IO_SIZE,
+ PCI_REGION_IO);
+
+ pci_set_region(hose->regions + 2,
+ CONFIG_PCI_PREF_BUS,
+ CONFIG_PCI_PREF_PHYS,
+ CONFIG_PCI_PREF_SIZE,
+ PCI_REGION_PREFETCH);
+
+ pci_set_region(hose->regions + 3,
+ 0,
+ 0,
+ gd->ram_size,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+
+ hose->region_count = 4;
+}
+
+int board_pci_post_scan(struct pci_controller *hose)
+{
+ int ret = 0;
+ u16 device;
+ int pam, i;
+ pci_dev_t vga;
+ ulong start;
+
+ /*
+ * i440FX and Q35 chipset have different PAM register offset, but with
+ * the same bitfield layout. Here we determine the offset based on its
+ * PCI device ID.
+ */
+ device = x86_pci_read_config16(PCI_BDF(0, 0, 0), PCI_DEVICE_ID);
+ pam = (device == PCI_DEVICE_ID_INTEL_82441) ? I440FX_PAM : Q35_PAM;
+
+ /*
+ * Initialize Programmable Attribute Map (PAM) Registers
+ *
+ * Configure legacy segments C/D/E/F to system RAM
+ */
+ for (i = 0; i < PAM_NUM; i++)
+ x86_pci_write_config8(PCI_BDF(0, 0, 0), pam + i, PAM_RW);
+
+ if (device == PCI_DEVICE_ID_INTEL_82441) {
+ /*
+ * Enable legacy IDE I/O ports decode
+ *
+ * Note: QEMU always decode legacy IDE I/O port on PIIX chipset.
+ * However Linux ata_piix driver does sanity check on these two
+ * registers to see whether legacy ports decode is turned on.
+ * This is to make Linux ata_piix driver happy.
+ */
+ x86_pci_write_config16(PIIX_IDE, IDE0_TIM, IDE_DECODE_EN);
+ x86_pci_write_config16(PIIX_IDE, IDE1_TIM, IDE_DECODE_EN);
+ }
+
+ /*
+ * QEMU emulated graphic card shows in the PCI configuration space with
+ * PCI vendor id and device id as an artificial pair 0x1234:0x1111.
+ * It is on PCI bus 0, function 0, but device number is not consistent
+ * for the two x86 targets it supports. For i440FX and PIIX chipset
+ * board, it shows as device 2, while for Q35 and ICH9 chipset board,
+ * it shows as device 1.
+ */
+ vga = (device == PCI_DEVICE_ID_INTEL_82441) ? I440FX_VGA : Q35_VGA;
+ start = get_timer(0);
+ ret = pci_run_vga_bios(vga, NULL, PCI_ROM_USE_NATIVE);
+ debug("BIOS ran in %lums\n", get_timer(start));
+
+ return ret;
+}