diff options
Diffstat (limited to 'arch/ppc/cpu/ppc4xx/fdt.c')
| -rw-r--r-- | arch/ppc/cpu/ppc4xx/fdt.c | 177 |
1 files changed, 0 insertions, 177 deletions
diff --git a/arch/ppc/cpu/ppc4xx/fdt.c b/arch/ppc/cpu/ppc4xx/fdt.c deleted file mode 100644 index 15a184b..0000000 --- a/arch/ppc/cpu/ppc4xx/fdt.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <watchdog.h> -#include <command.h> -#include <asm/cache.h> -#include <ppc4xx.h> - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -#include <libfdt.h> -#include <libfdt_env.h> -#include <fdt_support.h> -#include <asm/4xx_pcie.h> - -DECLARE_GLOBAL_DATA_PTR; - -void __ft_board_setup(void *blob, bd_t *bd) -{ - int rc; - int i; - u32 bxcr; - u32 ranges[EBC_NUM_BANKS * 4]; - u32 *p = ranges; - char ebc_path[] = "/plb/opb/ebc"; - - ft_cpu_setup(blob, bd); - - /* - * Read 4xx EBC bus bridge registers to get mappings of the - * peripheral banks into the OPB/PLB address space - */ - for (i = 0; i < EBC_NUM_BANKS; i++) { - mtdcr(EBC0_CFGADDR, EBC_BXCR(i)); - bxcr = mfdcr(EBC0_CFGDATA); - - if ((bxcr & EBC_BXCR_BU_MASK) != EBC_BXCR_BU_NONE) { - *p++ = i; - *p++ = 0; - *p++ = bxcr & EBC_BXCR_BAS_MASK; - *p++ = EBC_BXCR_BANK_SIZE(bxcr); - -#ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE - /* Try to update reg property in nor flash node too */ - fdt_fixup_nor_flash_size(blob, i, - EBC_BXCR_BANK_SIZE(bxcr)); -#endif - } - } - - /* Some 405 PPC's have EBC as direct PLB child in the dts */ - if (fdt_path_offset(blob, ebc_path) < 0) - strcpy(ebc_path, "/plb/ebc"); - rc = fdt_find_and_setprop(blob, ebc_path, "ranges", ranges, - (p - ranges) * sizeof(u32), 1); - if (rc) { - printf("Unable to update property EBC mappings, err=%s\n", - fdt_strerror(rc)); - } -} -void ft_board_setup(void *blob, bd_t *bd) __attribute__((weak, alias("__ft_board_setup"))); - -/* - * Fixup all PCIe nodes by setting the device_type property - * to "pci-endpoint" instead is "pci" for endpoint ports. - * This property will get checked later by the Linux driver - * to properly configure the PCIe port in Linux (again). - */ -void fdt_pcie_setup(void *blob) -{ - const char *compat = "ibm,plb-pciex"; - const char *prop = "device_type"; - const char *prop_val = "pci-endpoint"; - const u32 *port; - int no; - int rc; - - /* Search first PCIe node */ - no = fdt_node_offset_by_compatible(blob, -1, compat); - while (no != -FDT_ERR_NOTFOUND) { - port = fdt_getprop(blob, no, "port", NULL); - if (port == NULL) { - printf("WARNING: could not find port property\n"); - } else { - if (is_end_point(*port)) { - rc = fdt_setprop(blob, no, prop, prop_val, - strlen(prop_val) + 1); - if (rc < 0) - printf("WARNING: could not set %s for %s: %s.\n", - prop, compat, fdt_strerror(rc)); - } - } - - /* Jump to next PCIe node */ - no = fdt_node_offset_by_compatible(blob, no, compat); - } -} - -void ft_cpu_setup(void *blob, bd_t *bd) -{ - sys_info_t sys_info; - int off, ndepth = 0; - - get_sys_info(&sys_info); - - do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "timebase-frequency", - bd->bi_intfreq, 1); - do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "clock-frequency", - bd->bi_intfreq, 1); - do_fixup_by_path_u32(blob, "/plb", "clock-frequency", sys_info.freqPLB, 1); - do_fixup_by_path_u32(blob, "/plb/opb", "clock-frequency", sys_info.freqOPB, 1); - - if (fdt_path_offset(blob, "/plb/opb/ebc") >= 0) - do_fixup_by_path_u32(blob, "/plb/opb/ebc", "clock-frequency", - sys_info.freqEBC, 1); - else - do_fixup_by_path_u32(blob, "/plb/ebc", "clock-frequency", - sys_info.freqEBC, 1); - - fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); - - /* - * Fixup all UART clocks for CPU internal UARTs - * (only these UARTs are definitely clocked by gd->uart_clk) - * - * These UARTs are direct childs of /plb/opb. This code - * does not touch any UARTs that are connected to the ebc. - */ - off = fdt_path_offset(blob, "/plb/opb"); - while ((off = fdt_next_node(blob, off, &ndepth)) >= 0) { - /* - * process all sub nodes and stop when we are back - * at the starting depth - */ - if (ndepth <= 0) - break; - - /* only update direct childs */ - if ((ndepth == 1) && - (fdt_node_check_compatible(blob, off, "ns16550") == 0)) - fdt_setprop(blob, off, - "clock-frequency", - (void*)&(gd->uart_clk), 4); - } - - /* - * Fixup all ethernet nodes - * Note: aliases in the dts are required for this - */ - fdt_fixup_ethernet(blob); - - /* - * Fixup all available PCIe nodes by setting the device_type property - */ - fdt_pcie_setup(blob); -} -#endif /* CONFIG_OF_LIBFDT && CONFIG_OF_BOARD_SETUP */ |