1 files changed, 241 insertions, 0 deletions
diff --git a/arch/ppc/cpu/mpc83xx/pci.c b/arch/ppc/cpu/mpc83xx/pci.c
new file mode 100644
index 0000000..a42b230
--- /dev/null
+++ b/arch/ppc/cpu/mpc83xx/pci.c
@@ -0,0 +1,241 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2007
+ *
+ * Author: Scott Wood <scottwood@freescale.com>,
+ * with some bits from older board-specific PCI initialization.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <fdt_support.h>
+#endif
+
+#include <asm/mpc8349_pci.h>
+
+#define MAX_BUSES 2
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct pci_controller pci_hose[MAX_BUSES];
+static int pci_num_buses;
+
+static void pci_init_bus(int bus, struct pci_region *reg)
+{
+	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
+	volatile pot83xx_t *pot = immr->ios.pot;
+	volatile pcictrl83xx_t *pci_ctrl = &immr->pci_ctrl[bus];
+	struct pci_controller *hose = &pci_hose[bus];
+	u32 dev;
+	u16 reg16;
+	int i;
+
+	if (bus == 1)
+		pot += 3;
+
+	/* Setup outbound translation windows */
+	for (i = 0; i < 3; i++, reg++, pot++) {
+		if (reg->size == 0)
+			break;
+
+		hose->regions[i] = *reg;
+		hose->region_count++;
+
+		pot->potar = reg->bus_start >> 12;
+		pot->pobar = reg->phys_start >> 12;
+		pot->pocmr = ~(reg->size - 1) >> 12;
+
+		if (reg->flags & PCI_REGION_IO)
+			pot->pocmr |= POCMR_IO;
+#ifdef CONFIG_83XX_PCI_STREAMING
+		else if (reg->flags & PCI_REGION_PREFETCH)
+			pot->pocmr |= POCMR_SE;
+#endif
+
+		if (bus == 1)
+			pot->pocmr |= POCMR_DST;
+
+		pot->pocmr |= POCMR_EN;
+	}
+
+	/* Point inbound translation at RAM */
+	pci_ctrl->pitar1 = 0;
+	pci_ctrl->pibar1 = 0;
+	pci_ctrl->piebar1 = 0;
+	pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
+	                   PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size - 1));
+
+	i = hose->region_count++;
+	hose->regions[i].bus_start = 0;
+	hose->regions[i].phys_start = 0;
+	hose->regions[i].size = gd->ram_size;
+	hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_SYS_MEMORY;
+
+	hose->first_busno = pci_last_busno() + 1;
+	hose->last_busno = 0xff;
+
+	pci_setup_indirect(hose, CONFIG_SYS_IMMR + 0x8300 + bus * 0x80,
+	                         CONFIG_SYS_IMMR + 0x8304 + bus * 0x80);
+
+	pci_register_hose(hose);
+
+	/*
+	 * Write to Command register
+	 */
+	reg16 = 0xff;
+	dev = PCI_BDF(hose->first_busno, 0, 0);
+	pci_hose_read_config_word(hose, dev, PCI_COMMAND, &reg16);
+	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+	pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
+
+	/*
+	 * Clear non-reserved bits in status register.
+	 */
+	pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
+	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
+	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
+
+#ifdef CONFIG_PCI_SCAN_SHOW
+	printf("PCI:   Bus Dev VenId DevId Class Int\n");
+#endif
+#ifndef CONFIG_PCISLAVE
+	/*
+	 * Hose scan.
+	 */
+	hose->last_busno = pci_hose_scan(hose);
+#endif
+}
+
+/*
+ * The caller must have already set OCCR, and the PCI_LAW BARs
+ * must have been set to cover all of the requested regions.
+ *
+ * If fewer than three regions are requested, then the region
+ * list is terminated with a region of size 0.
+ */
+void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot)
+{
+	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
+	int i;
+
+	if (num_buses > MAX_BUSES) {
+		printf("%d PCI buses requsted, %d supported\n",
+		       num_buses, MAX_BUSES);
+
+		num_buses = MAX_BUSES;
+	}
+
+	pci_num_buses = num_buses;
+
+	/*
+	 * Release PCI RST Output signal.
+	 * Power on to RST high must be at least 100 ms as per PCI spec.
+	 * On warm boots only 1 ms is required.
+	 */
+	udelay(warmboot ? 1000 : 100000);
+
+	for (i = 0; i < num_buses; i++)
+		immr->pci_ctrl[i].gcr = 1;
+
+	/*
+	 * RST high to first config access must be at least 2^25 cycles
+	 * as per PCI spec.  This could be cut in half if we know we're
+	 * running at 66MHz.  This could be insufficiently long if we're
+	 * running the PCI bus at significantly less than 33MHz.
+	 */
+	udelay(1020000);
+
+	for (i = 0; i < num_buses; i++)
+		pci_init_bus(i, reg[i]);
+}
+
+#ifdef CONFIG_PCISLAVE
+
+#define PCI_FUNCTION_CONFIG	0x44
+#define PCI_FUNCTION_CFG_LOCK	0x20
+
+/*
+ * Unlock the configuration bit so that the host system can begin booting
+ *
+ * This should be used after you have:
+ * 1) Called mpc83xx_pci_init()
+ * 2) Set up your inbound translation windows to the appropriate size
+ */
+void mpc83xx_pcislave_unlock(int bus)
+{
+	struct pci_controller *hose = &pci_hose[bus];
+	u32 dev;
+	u16 reg16;
+
+	/* Unlock configuration lock in PCI function configuration register */
+	dev = PCI_BDF(hose->first_busno, 0, 0);
+	pci_hose_read_config_word (hose, dev, PCI_FUNCTION_CONFIG, &reg16);
+	reg16 &= ~(PCI_FUNCTION_CFG_LOCK);
+	pci_hose_write_config_word (hose, dev, PCI_FUNCTION_CONFIG, reg16);
+
+	/* The configuration bit is now unlocked, so we can scan the bus */
+	hose->last_busno = pci_hose_scan(hose);
+}
+#endif
+
+#if defined(CONFIG_OF_LIBFDT)
+void ft_pci_setup(void *blob, bd_t *bd)
+{
+	int nodeoffset;
+	int tmp[2];
+	const char *path;
+
+	if (pci_num_buses < 1)
+		return;
+
+	nodeoffset = fdt_path_offset(blob, "/aliases");
+	if (nodeoffset >= 0) {
+		path = fdt_getprop(blob, nodeoffset, "pci0", NULL);
+		if (path) {
+			tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
+			tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
+			do_fixup_by_path(blob, path, "bus-range",
+				&tmp, sizeof(tmp), 1);
+
+			tmp[0] = cpu_to_be32(gd->pci_clk);
+			do_fixup_by_path(blob, path, "clock-frequency",
+				&tmp, sizeof(tmp[0]), 1);
+		}
+
+		if (pci_num_buses < 2)
+			return;
+
+		path = fdt_getprop(blob, nodeoffset, "pci1", NULL);
+		if (path) {
+			tmp[0] = cpu_to_be32(pci_hose[1].first_busno);
+			tmp[1] = cpu_to_be32(pci_hose[1].last_busno);
+			do_fixup_by_path(blob, path, "bus-range",
+				&tmp, sizeof(tmp), 1);
+
+			tmp[0] = cpu_to_be32(gd->pci_clk);
+			do_fixup_by_path(blob, path, "clock-frequency",
+				&tmp, sizeof(tmp[0]), 1);
+		}
+	}
+}
+#endif /* CONFIG_OF_LIBFDT */