diff options
Diffstat (limited to 'arch/ppc/cpu/mpc8260/cpu_init.c')
| -rw-r--r-- | arch/ppc/cpu/mpc8260/cpu_init.c | 292 |
1 files changed, 0 insertions, 292 deletions
diff --git a/arch/ppc/cpu/mpc8260/cpu_init.c b/arch/ppc/cpu/mpc8260/cpu_init.c deleted file mode 100644 index 1d52773..0000000 --- a/arch/ppc/cpu/mpc8260/cpu_init.c +++ /dev/null @@ -1,292 +0,0 @@ -/* - * (C) Copyright 2000-2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <mpc8260.h> -#include <asm/cpm_8260.h> -#include <ioports.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_BOARD_GET_CPU_CLK_F) -extern unsigned long board_get_cpu_clk_f (void); -#endif - -static void config_8260_ioports (volatile immap_t * immr) -{ - int portnum; - - for (portnum = 0; portnum < 4; portnum++) { - uint pmsk = 0, - ppar = 0, - psor = 0, - pdir = 0, - podr = 0, - pdat = 0; - iop_conf_t *iopc = (iop_conf_t *) & iop_conf_tab[portnum][0]; - iop_conf_t *eiopc = iopc + 32; - uint msk = 1; - - /* - * NOTE: - * index 0 refers to pin 31, - * index 31 refers to pin 0 - */ - while (iopc < eiopc) { - if (iopc->conf) { - pmsk |= msk; - if (iopc->ppar) - ppar |= msk; - if (iopc->psor) - psor |= msk; - if (iopc->pdir) - pdir |= msk; - if (iopc->podr) - podr |= msk; - if (iopc->pdat) - pdat |= msk; - } - - msk <<= 1; - iopc++; - } - - if (pmsk != 0) { - volatile ioport_t *iop = ioport_addr (immr, portnum); - uint tpmsk = ~pmsk; - - /* - * the (somewhat confused) paragraph at the - * bottom of page 35-5 warns that there might - * be "unknown behaviour" when programming - * PSORx and PDIRx, if PPARx = 1, so I - * decided this meant I had to disable the - * dedicated function first, and enable it - * last. - */ - iop->ppar &= tpmsk; - iop->psor = (iop->psor & tpmsk) | psor; - iop->podr = (iop->podr & tpmsk) | podr; - iop->pdat = (iop->pdat & tpmsk) | pdat; - iop->pdir = (iop->pdir & tpmsk) | pdir; - iop->ppar |= ppar; - } - } -} - -#define SET_VAL_MASK(a, b, mask) ((a & mask) | (b & ~mask)) -/* - * Breath some life into the CPU... - * - * Set up the memory map, - * initialize a bunch of registers, - * initialize the UPM's - */ -void cpu_init_f (volatile immap_t * immr) -{ -#if !defined(CONFIG_COGENT) /* done in start.S for the cogent */ - uint sccr; -#endif -#if defined(CONFIG_BOARD_GET_CPU_CLK_F) - unsigned long cpu_clk; -#endif - volatile memctl8260_t *memctl = &immr->im_memctl; - extern void m8260_cpm_reset (void); - - /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); - - /* Clear initial global data */ - memset ((void *) gd, 0, sizeof (gd_t)); - - /* RSR - Reset Status Register - clear all status (5-4) */ - gd->reset_status = immr->im_clkrst.car_rsr; - immr->im_clkrst.car_rsr = RSR_ALLBITS; - - /* RMR - Reset Mode Register - contains checkstop reset enable (5-5) */ - immr->im_clkrst.car_rmr = CONFIG_SYS_RMR; - - /* BCR - Bus Configuration Register (4-25) */ -#if defined(CONFIG_SYS_BCR_60x) && (CONFIG_SYS_BCR_SINGLE) - if (immr->im_siu_conf.sc_bcr & BCR_EBM) { - immr->im_siu_conf.sc_bcr = SET_VAL_MASK(immr->im_siu_conf.sc_bcr, CONFIG_SYS_BCR_60x, 0x80000010); - } else { - immr->im_siu_conf.sc_bcr = SET_VAL_MASK(immr->im_siu_conf.sc_bcr, CONFIG_SYS_BCR_SINGLE, 0x80000010); - } -#else - immr->im_siu_conf.sc_bcr = CONFIG_SYS_BCR; -#endif - - /* SIUMCR - contains debug pin configuration (4-31) */ -#if defined(CONFIG_SYS_SIUMCR_LOW) && (CONFIG_SYS_SIUMCR_HIGH) - cpu_clk = board_get_cpu_clk_f (); - if (cpu_clk >= 100000000) { - immr->im_siu_conf.sc_siumcr = SET_VAL_MASK(immr->im_siu_conf.sc_siumcr, CONFIG_SYS_SIUMCR_HIGH, 0x9f3cc000); - } else { - immr->im_siu_conf.sc_siumcr = SET_VAL_MASK(immr->im_siu_conf.sc_siumcr, CONFIG_SYS_SIUMCR_LOW, 0x9f3cc000); - } -#else - immr->im_siu_conf.sc_siumcr = CONFIG_SYS_SIUMCR; -#endif - - config_8260_ioports (immr); - - /* initialize time counter status and control register (4-40) */ - immr->im_sit.sit_tmcntsc = CONFIG_SYS_TMCNTSC; - - /* initialize the PIT (4-42) */ - immr->im_sit.sit_piscr = CONFIG_SYS_PISCR; - -#if !defined(CONFIG_COGENT) /* done in start.S for the cogent */ - /* System clock control register (9-8) */ - sccr = immr->im_clkrst.car_sccr & - (SCCR_PCI_MODE | SCCR_PCI_MODCK | SCCR_PCIDF_MSK); - immr->im_clkrst.car_sccr = sccr | - (CONFIG_SYS_SCCR & ~(SCCR_PCI_MODE | SCCR_PCI_MODCK | SCCR_PCIDF_MSK) ); -#endif /* !CONFIG_COGENT */ - - /* - * Memory Controller: - */ - - /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary - * addresses - these have to be modified later when FLASH size - * has been determined - */ - -#if defined(CONFIG_SYS_OR0_REMAP) - memctl->memc_or0 = CONFIG_SYS_OR0_REMAP; -#endif -#if defined(CONFIG_SYS_OR1_REMAP) - memctl->memc_or1 = CONFIG_SYS_OR1_REMAP; -#endif - - /* now restrict to preliminary range */ - /* the PS came from the HRCW, donīt change it */ - memctl->memc_br0 = SET_VAL_MASK(memctl->memc_br0 , CONFIG_SYS_BR0_PRELIM, BRx_PS_MSK); - memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM; - -#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM) - memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; - memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM) - memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM; - memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) - memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM; - memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM) - memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM; - memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM) - memctl->memc_or5 = CONFIG_SYS_OR5_PRELIM; - memctl->memc_br5 = CONFIG_SYS_BR5_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM) - memctl->memc_or6 = CONFIG_SYS_OR6_PRELIM; - memctl->memc_br6 = CONFIG_SYS_BR6_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM) - memctl->memc_or7 = CONFIG_SYS_OR7_PRELIM; - memctl->memc_br7 = CONFIG_SYS_BR7_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR8_PRELIM) && defined(CONFIG_SYS_OR8_PRELIM) - memctl->memc_or8 = CONFIG_SYS_OR8_PRELIM; - memctl->memc_br8 = CONFIG_SYS_BR8_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR9_PRELIM) && defined(CONFIG_SYS_OR9_PRELIM) - memctl->memc_or9 = CONFIG_SYS_OR9_PRELIM; - memctl->memc_br9 = CONFIG_SYS_BR9_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR10_PRELIM) && defined(CONFIG_SYS_OR10_PRELIM) - memctl->memc_or10 = CONFIG_SYS_OR10_PRELIM; - memctl->memc_br10 = CONFIG_SYS_BR10_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR11_PRELIM) && defined(CONFIG_SYS_OR11_PRELIM) - memctl->memc_or11 = CONFIG_SYS_OR11_PRELIM; - memctl->memc_br11 = CONFIG_SYS_BR11_PRELIM; -#endif - - m8260_cpm_reset (); -} - -/* - * initialize higher level parts of CPU like time base and timers - */ -int cpu_init_r (void) -{ - volatile immap_t *immr = (immap_t *) gd->bd->bi_immr_base; - - immr->im_cpm.cp_rccr = CONFIG_SYS_RCCR; - - return (0); -} - -/* - * print out the reason for the reset - */ -int prt_8260_rsr (void) -{ - static struct { - ulong mask; - char *desc; - } bits[] = { - { - RSR_JTRS, "JTAG"}, { - RSR_CSRS, "Check Stop"}, { - RSR_SWRS, "Software Watchdog"}, { - RSR_BMRS, "Bus Monitor"}, { - RSR_ESRS, "External Soft"}, { - RSR_EHRS, "External Hard"} - }; - static int n = sizeof bits / sizeof bits[0]; - ulong rsr = gd->reset_status; - int i; - char *sep; - - puts (CPU_ID_STR " Reset Status:"); - - sep = " "; - for (i = 0; i < n; i++) - if (rsr & bits[i].mask) { - printf ("%s%s", sep, bits[i].desc); - sep = ", "; - } - - puts ("\n\n"); - return (0); -} |