diff options
Diffstat (limited to 'arch/ppc/cpu/mpc5xxx/start.S')
| -rw-r--r-- | arch/ppc/cpu/mpc5xxx/start.S | 777 |
1 files changed, 0 insertions, 777 deletions
diff --git a/arch/ppc/cpu/mpc5xxx/start.S b/arch/ppc/cpu/mpc5xxx/start.S deleted file mode 100644 index ba49944..0000000 --- a/arch/ppc/cpu/mpc5xxx/start.S +++ /dev/null @@ -1,777 +0,0 @@ -/* - * Copyright (C) 1998 Dan Malek <dmalek@jlc.net> - * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se> - * Copyright (C) 2000 - 2003 Wolfgang Denk <wd@denx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * U-Boot - Startup Code for MPC5xxx CPUs - */ -#include <config.h> -#include <mpc5xxx.h> -#include <timestamp.h> -#include <version.h> - -#define CONFIG_MPC5xxx 1 /* needed for Linux kernel header files */ -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ - -#include <ppc_asm.tmpl> -#include <ppc_defs.h> - -#include <asm/cache.h> -#include <asm/mmu.h> - -#ifndef CONFIG_IDENT_STRING -#define CONFIG_IDENT_STRING "" -#endif - -/* We don't want the MMU yet. -*/ -#undef MSR_KERNEL -/* Floating Point enable, Machine Check and Recoverable Interr. */ -#ifdef DEBUG -#define MSR_KERNEL (MSR_FP|MSR_RI) -#else -#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI) -#endif - -/* - * Set up GOT: Global Offset Table - * - * Use r12 to access the GOT - */ - START_GOT - GOT_ENTRY(_GOT2_TABLE_) - GOT_ENTRY(_FIXUP_TABLE_) - - GOT_ENTRY(_start) - GOT_ENTRY(_start_of_vectors) - GOT_ENTRY(_end_of_vectors) - GOT_ENTRY(transfer_to_handler) - - GOT_ENTRY(__init_end) - GOT_ENTRY(_end) - GOT_ENTRY(__bss_start) - END_GOT - -/* - * Version string - */ - .data - .globl version_string -version_string: - .ascii U_BOOT_VERSION - .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")" - .ascii CONFIG_IDENT_STRING, "\0" - -/* - * Exception vectors - */ - .text - . = EXC_OFF_SYS_RESET - .globl _start -_start: - li r21, BOOTFLAG_COLD /* Normal Power-On */ - nop - b boot_cold - - . = EXC_OFF_SYS_RESET + 0x10 - - .globl _start_warm -_start_warm: - li r21, BOOTFLAG_WARM /* Software reboot */ - b boot_warm - -boot_cold: -boot_warm: - mfmsr r5 /* save msr contents */ - - /* Move CSBoot and adjust instruction pointer */ - /*--------------------------------------------------------------*/ - -#if defined(CONFIG_SYS_LOWBOOT) -# if defined(CONFIG_SYS_RAMBOOT) -# error CONFIG_SYS_LOWBOOT is incompatible with CONFIG_SYS_RAMBOOT -# endif /* CONFIG_SYS_RAMBOOT */ - lis r4, CONFIG_SYS_DEFAULT_MBAR@h - lis r3, START_REG(CONFIG_SYS_BOOTCS_START)@h - ori r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l - stw r3, 0x4(r4) /* CS0 start */ - lis r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@h - ori r3, r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@l - stw r3, 0x8(r4) /* CS0 stop */ - lis r3, 0x02010000@h - ori r3, r3, 0x02010000@l - stw r3, 0x54(r4) /* CS0 and Boot enable */ - - lis r3, lowboot_reentry@h /* jump from bootlow address space (0x0000xxxx) */ - ori r3, r3, lowboot_reentry@l /* to the address space the linker used */ - mtlr r3 - blr - -lowboot_reentry: - lis r3, START_REG(CONFIG_SYS_BOOTCS_START)@h - ori r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l - stw r3, 0x4c(r4) /* Boot start */ - lis r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@h - ori r3, r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@l - stw r3, 0x50(r4) /* Boot stop */ - lis r3, 0x02000001@h - ori r3, r3, 0x02000001@l - stw r3, 0x54(r4) /* Boot enable, CS0 disable */ -#endif /* CONFIG_SYS_LOWBOOT */ - -#if defined(CONFIG_SYS_DEFAULT_MBAR) && !defined(CONFIG_SYS_RAMBOOT) - lis r3, CONFIG_SYS_MBAR@h - ori r3, r3, CONFIG_SYS_MBAR@l - /* MBAR is mirrored into the MBAR SPR */ - mtspr MBAR,r3 - rlwinm r3, r3, 16, 16, 31 - lis r4, CONFIG_SYS_DEFAULT_MBAR@h - stw r3, 0(r4) -#endif /* CONFIG_SYS_DEFAULT_MBAR */ - - /* Initialise the MPC5xxx processor core */ - /*--------------------------------------------------------------*/ - - bl init_5xxx_core - - /* initialize some things that are hard to access from C */ - /*--------------------------------------------------------------*/ - - /* set up stack in on-chip SRAM */ - lis r3, CONFIG_SYS_INIT_RAM_ADDR@h - ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l - ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET - li r0, 0 /* Make room for stack frame header and */ - stwu r0, -4(r1) /* clear final stack frame so that */ - stwu r0, -4(r1) /* stack backtraces terminate cleanly */ - - /* let the C-code set up the rest */ - /* */ - /* Be careful to keep code relocatable ! */ - /*--------------------------------------------------------------*/ - - GET_GOT /* initialize GOT access */ - - /* r3: IMMR */ - bl cpu_init_f /* run low-level CPU init code (in Flash)*/ - - mr r3, r21 - /* r3: BOOTFLAG */ - bl board_init_f /* run 1st part of board init code (in Flash)*/ - -/* - * Vector Table - */ - - .globl _start_of_vectors -_start_of_vectors: - -/* Machine check */ - STD_EXCEPTION(0x200, MachineCheck, MachineCheckException) - -/* Data Storage exception. */ - STD_EXCEPTION(0x300, DataStorage, UnknownException) - -/* Instruction Storage exception. */ - STD_EXCEPTION(0x400, InstStorage, UnknownException) - -/* External Interrupt exception. */ - STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt) - -/* Alignment exception. */ - . = 0x600 -Alignment: - EXCEPTION_PROLOG(SRR0, SRR1) - mfspr r4,DAR - stw r4,_DAR(r21) - mfspr r5,DSISR - stw r5,_DSISR(r21) - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE) - -/* Program check exception */ - . = 0x700 -ProgramCheck: - EXCEPTION_PROLOG(SRR0, SRR1) - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException, - MSR_KERNEL, COPY_EE) - - STD_EXCEPTION(0x800, FPUnavailable, UnknownException) - - /* I guess we could implement decrementer, and may have - * to someday for timekeeping. - */ - STD_EXCEPTION(0x900, Decrementer, timer_interrupt) - - STD_EXCEPTION(0xa00, Trap_0a, UnknownException) - STD_EXCEPTION(0xb00, Trap_0b, UnknownException) - STD_EXCEPTION(0xc00, SystemCall, UnknownException) - STD_EXCEPTION(0xd00, SingleStep, UnknownException) - - STD_EXCEPTION(0xe00, Trap_0e, UnknownException) - STD_EXCEPTION(0xf00, Trap_0f, UnknownException) - - STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException) - STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException) - STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException) -#ifdef DEBUG - . = 0x1300 - /* - * This exception occurs when the program counter matches the - * Instruction Address Breakpoint Register (IABR). - * - * I want the cpu to halt if this occurs so I can hunt around - * with the debugger and look at things. - * - * When DEBUG is defined, both machine check enable (in the MSR) - * and checkstop reset enable (in the reset mode register) are - * turned off and so a checkstop condition will result in the cpu - * halting. - * - * I force the cpu into a checkstop condition by putting an illegal - * instruction here (at least this is the theory). - * - * well - that didnt work, so just do an infinite loop! - */ -1: b 1b -#else - STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException) -#endif - STD_EXCEPTION(0x1400, SMI, UnknownException) - - STD_EXCEPTION(0x1500, Trap_15, UnknownException) - STD_EXCEPTION(0x1600, Trap_16, UnknownException) - STD_EXCEPTION(0x1700, Trap_17, UnknownException) - STD_EXCEPTION(0x1800, Trap_18, UnknownException) - STD_EXCEPTION(0x1900, Trap_19, UnknownException) - STD_EXCEPTION(0x1a00, Trap_1a, UnknownException) - STD_EXCEPTION(0x1b00, Trap_1b, UnknownException) - STD_EXCEPTION(0x1c00, Trap_1c, UnknownException) - STD_EXCEPTION(0x1d00, Trap_1d, UnknownException) - STD_EXCEPTION(0x1e00, Trap_1e, UnknownException) - STD_EXCEPTION(0x1f00, Trap_1f, UnknownException) - STD_EXCEPTION(0x2000, Trap_20, UnknownException) - STD_EXCEPTION(0x2100, Trap_21, UnknownException) - STD_EXCEPTION(0x2200, Trap_22, UnknownException) - STD_EXCEPTION(0x2300, Trap_23, UnknownException) - STD_EXCEPTION(0x2400, Trap_24, UnknownException) - STD_EXCEPTION(0x2500, Trap_25, UnknownException) - STD_EXCEPTION(0x2600, Trap_26, UnknownException) - STD_EXCEPTION(0x2700, Trap_27, UnknownException) - STD_EXCEPTION(0x2800, Trap_28, UnknownException) - STD_EXCEPTION(0x2900, Trap_29, UnknownException) - STD_EXCEPTION(0x2a00, Trap_2a, UnknownException) - STD_EXCEPTION(0x2b00, Trap_2b, UnknownException) - STD_EXCEPTION(0x2c00, Trap_2c, UnknownException) - STD_EXCEPTION(0x2d00, Trap_2d, UnknownException) - STD_EXCEPTION(0x2e00, Trap_2e, UnknownException) - STD_EXCEPTION(0x2f00, Trap_2f, UnknownException) - - - .globl _end_of_vectors -_end_of_vectors: - - . = 0x3000 - -/* - * This code finishes saving the registers to the exception frame - * and jumps to the appropriate handler for the exception. - * Register r21 is pointer into trap frame, r1 has new stack pointer. - */ - .globl transfer_to_handler -transfer_to_handler: - stw r22,_NIP(r21) - lis r22,MSR_POW@h - andc r23,r23,r22 - stw r23,_MSR(r21) - SAVE_GPR(7, r21) - SAVE_4GPRS(8, r21) - SAVE_8GPRS(12, r21) - SAVE_8GPRS(24, r21) - mflr r23 - andi. r24,r23,0x3f00 /* get vector offset */ - stw r24,TRAP(r21) - li r22,0 - stw r22,RESULT(r21) - lwz r24,0(r23) /* virtual address of handler */ - lwz r23,4(r23) /* where to go when done */ - mtspr SRR0,r24 - mtspr SRR1,r20 - mtlr r23 - SYNC - rfi /* jump to handler, enable MMU */ - -int_return: - mfmsr r28 /* Disable interrupts */ - li r4,0 - ori r4,r4,MSR_EE - andc r28,r28,r4 - SYNC /* Some chip revs need this... */ - mtmsr r28 - SYNC - lwz r2,_CTR(r1) - lwz r0,_LINK(r1) - mtctr r2 - mtlr r0 - lwz r2,_XER(r1) - lwz r0,_CCR(r1) - mtspr XER,r2 - mtcrf 0xFF,r0 - REST_10GPRS(3, r1) - REST_10GPRS(13, r1) - REST_8GPRS(23, r1) - REST_GPR(31, r1) - lwz r2,_NIP(r1) /* Restore environment */ - lwz r0,_MSR(r1) - mtspr SRR0,r2 - mtspr SRR1,r0 - lwz r0,GPR0(r1) - lwz r2,GPR2(r1) - lwz r1,GPR1(r1) - SYNC - rfi - -/* - * This code initialises the MPC5xxx processor core - * (conforms to PowerPC 603e spec) - * Note: expects original MSR contents to be in r5. - */ - - .globl init_5xx_core -init_5xxx_core: - - /* Initialize machine status; enable machine check interrupt */ - /*--------------------------------------------------------------*/ - - li r3, MSR_KERNEL /* Set ME and RI flags */ - rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */ -#ifdef DEBUG - rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */ -#endif - SYNC /* Some chip revs need this... */ - mtmsr r3 - SYNC - mtspr SRR1, r3 /* Make SRR1 match MSR */ - - /* Initialize the Hardware Implementation-dependent Registers */ - /* HID0 also contains cache control */ - /*--------------------------------------------------------------*/ - - lis r3, CONFIG_SYS_HID0_INIT@h - ori r3, r3, CONFIG_SYS_HID0_INIT@l - SYNC - mtspr HID0, r3 - - lis r3, CONFIG_SYS_HID0_FINAL@h - ori r3, r3, CONFIG_SYS_HID0_FINAL@l - SYNC - mtspr HID0, r3 - - /* clear all BAT's */ - /*--------------------------------------------------------------*/ - - li r0, 0 - mtspr DBAT0U, r0 - mtspr DBAT0L, r0 - mtspr DBAT1U, r0 - mtspr DBAT1L, r0 - mtspr DBAT2U, r0 - mtspr DBAT2L, r0 - mtspr DBAT3U, r0 - mtspr DBAT3L, r0 - mtspr DBAT4U, r0 - mtspr DBAT4L, r0 - mtspr DBAT5U, r0 - mtspr DBAT5L, r0 - mtspr DBAT6U, r0 - mtspr DBAT6L, r0 - mtspr DBAT7U, r0 - mtspr DBAT7L, r0 - mtspr IBAT0U, r0 - mtspr IBAT0L, r0 - mtspr IBAT1U, r0 - mtspr IBAT1L, r0 - mtspr IBAT2U, r0 - mtspr IBAT2L, r0 - mtspr IBAT3U, r0 - mtspr IBAT3L, r0 - mtspr IBAT4U, r0 - mtspr IBAT4L, r0 - mtspr IBAT5U, r0 - mtspr IBAT5L, r0 - mtspr IBAT6U, r0 - mtspr IBAT6L, r0 - mtspr IBAT7U, r0 - mtspr IBAT7L, r0 - SYNC - - /* invalidate all tlb's */ - /* */ - /* From the 603e User Manual: "The 603e provides the ability to */ - /* invalidate a TLB entry. The TLB Invalidate Entry (tlbie) */ - /* instruction invalidates the TLB entry indexed by the EA, and */ - /* operates on both the instruction and data TLBs simultaneously*/ - /* invalidating four TLB entries (both sets in each TLB). The */ - /* index corresponds to bits 15-19 of the EA. To invalidate all */ - /* entries within both TLBs, 32 tlbie instructions should be */ - /* issued, incrementing this field by one each time." */ - /* */ - /* "Note that the tlbia instruction is not implemented on the */ - /* 603e." */ - /* */ - /* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000 */ - /* incrementing by 0x1000 each time. The code below is sort of */ - /* based on code in "flush_tlbs" from arch/ppc/kernel/head.S */ - /* */ - /*--------------------------------------------------------------*/ - - li r3, 32 - mtctr r3 - li r3, 0 -1: tlbie r3 - addi r3, r3, 0x1000 - bdnz 1b - SYNC - - /* Done! */ - /*--------------------------------------------------------------*/ - - blr - -/* Cache functions. - * - * Note: requires that all cache bits in - * HID0 are in the low half word. - */ - .globl icache_enable -icache_enable: - mfspr r3, HID0 - ori r3, r3, HID0_ICE - lis r4, 0 - ori r4, r4, HID0_ILOCK - andc r3, r3, r4 - ori r4, r3, HID0_ICFI - isync - mtspr HID0, r4 /* sets enable and invalidate, clears lock */ - isync - mtspr HID0, r3 /* clears invalidate */ - blr - - .globl icache_disable -icache_disable: - mfspr r3, HID0 - lis r4, 0 - ori r4, r4, HID0_ICE|HID0_ILOCK - andc r3, r3, r4 - ori r4, r3, HID0_ICFI - isync - mtspr HID0, r4 /* sets invalidate, clears enable and lock */ - isync - mtspr HID0, r3 /* clears invalidate */ - blr - - .globl icache_status -icache_status: - mfspr r3, HID0 - rlwinm r3, r3, HID0_ICE_BITPOS + 1, 31, 31 - blr - - .globl dcache_enable -dcache_enable: - mfspr r3, HID0 - ori r3, r3, HID0_DCE - lis r4, 0 - ori r4, r4, HID0_DLOCK - andc r3, r3, r4 - ori r4, r3, HID0_DCI - sync - mtspr HID0, r4 /* sets enable and invalidate, clears lock */ - sync - mtspr HID0, r3 /* clears invalidate */ - blr - - .globl dcache_disable -dcache_disable: - mfspr r3, HID0 - lis r4, 0 - ori r4, r4, HID0_DCE|HID0_DLOCK - andc r3, r3, r4 - ori r4, r3, HID0_DCI - sync - mtspr HID0, r4 /* sets invalidate, clears enable and lock */ - sync - mtspr HID0, r3 /* clears invalidate */ - blr - - .globl dcache_status -dcache_status: - mfspr r3, HID0 - rlwinm r3, r3, HID0_DCE_BITPOS + 1, 31, 31 - blr - - .globl get_svr -get_svr: - mfspr r3, SVR - blr - - .globl get_pvr -get_pvr: - mfspr r3, PVR - blr - -/*------------------------------------------------------------------------------*/ - -/* - * void relocate_code (addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. - * - * r3 = dest - * r4 = src - * r5 = length in bytes - * r6 = cachelinesize - */ - .globl relocate_code -relocate_code: - mr r1, r3 /* Set new stack pointer */ - mr r9, r4 /* Save copy of Global Data pointer */ - mr r10, r5 /* Save copy of Destination Address */ - - GET_GOT - mr r3, r5 /* Destination Address */ - lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */ - ori r4, r4, CONFIG_SYS_MONITOR_BASE@l - lwz r5, GOT(__init_end) - sub r5, r5, r4 - li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */ - - /* - * Fix GOT pointer: - * - * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address - * - * Offset: - */ - sub r15, r10, r4 - - /* First our own GOT */ - add r12, r12, r15 - /* then the one used by the C code */ - add r30, r30, r15 - - /* - * Now relocate code - */ - - cmplw cr1,r3,r4 - addi r0,r5,3 - srwi. r0,r0,2 - beq cr1,4f /* In place copy is not necessary */ - beq 7f /* Protect against 0 count */ - mtctr r0 - bge cr1,2f - - la r8,-4(r4) - la r7,-4(r3) -1: lwzu r0,4(r8) - stwu r0,4(r7) - bdnz 1b - b 4f - -2: slwi r0,r0,2 - add r8,r4,r0 - add r7,r3,r0 -3: lwzu r0,-4(r8) - stwu r0,-4(r7) - bdnz 3b - -/* - * Now flush the cache: note that we must start from a cache aligned - * address. Otherwise we might miss one cache line. - */ -4: cmpwi r6,0 - add r5,r3,r5 - beq 7f /* Always flush prefetch queue in any case */ - subi r0,r6,1 - andc r3,r3,r0 - mfspr r7,HID0 /* don't do dcbst if dcache is disabled */ - rlwinm r7,r7,HID0_DCE_BITPOS+1,31,31 - cmpwi r7,0 - beq 9f - mr r4,r3 -5: dcbst 0,r4 - add r4,r4,r6 - cmplw r4,r5 - blt 5b - sync /* Wait for all dcbst to complete on bus */ -9: mfspr r7,HID0 /* don't do icbi if icache is disabled */ - rlwinm r7,r7,HID0_ICE_BITPOS+1,31,31 - cmpwi r7,0 - beq 7f - mr r4,r3 -6: icbi 0,r4 - add r4,r4,r6 - cmplw r4,r5 - blt 6b -7: sync /* Wait for all icbi to complete on bus */ - isync - -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ - - addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET - mtlr r0 - blr - -in_ram: - - /* - * Relocation Function, r12 point to got2+0x8000 - * - * Adjust got2 pointers, no need to check for 0, this code - * already puts a few entries in the table. - */ - li r0,__got2_entries@sectoff@l - la r3,GOT(_GOT2_TABLE_) - lwz r11,GOT(_GOT2_TABLE_) - mtctr r0 - sub r11,r3,r11 - addi r3,r3,-4 -1: lwzu r0,4(r3) - cmpwi r0,0 - beq- 2f - add r0,r0,r11 - stw r0,0(r3) -2: bdnz 1b - - /* - * Now adjust the fixups and the pointers to the fixups - * in case we need to move ourselves again. - */ - li r0,__fixup_entries@sectoff@l - lwz r3,GOT(_FIXUP_TABLE_) - cmpwi r0,0 - mtctr r0 - addi r3,r3,-4 - beq 4f -3: lwzu r4,4(r3) - lwzux r0,r4,r11 - add r0,r0,r11 - stw r10,0(r3) - stw r0,0(r4) - bdnz 3b -4: -clear_bss: - /* - * Now clear BSS segment - */ - lwz r3,GOT(__bss_start) - lwz r4,GOT(_end) - - cmplw 0, r3, r4 - beq 6f - - li r0, 0 -5: - stw r0, 0(r3) - addi r3, r3, 4 - cmplw 0, r3, r4 - bne 5b -6: - - mr r3, r9 /* Global Data pointer */ - mr r4, r10 /* Destination Address */ - bl board_init_r - - /* - * Copy exception vector code to low memory - * - * r3: dest_addr - * r7: source address, r8: end address, r9: target address - */ - .globl trap_init -trap_init: - mflr r4 /* save link register */ - GET_GOT - lwz r7, GOT(_start) - lwz r8, GOT(_end_of_vectors) - - li r9, 0x100 /* reset vector always at 0x100 */ - - cmplw 0, r7, r8 - bgelr /* return if r7>=r8 - just in case */ -1: - lwz r0, 0(r7) - stw r0, 0(r9) - addi r7, r7, 4 - addi r9, r9, 4 - cmplw 0, r7, r8 - bne 1b - - /* - * relocate `hdlr' and `int_return' entries - */ - li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET - li r8, Alignment - _start + EXC_OFF_SYS_RESET -2: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 2b - - li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET - bl trap_reloc - - li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET - bl trap_reloc - - li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET - li r8, SystemCall - _start + EXC_OFF_SYS_RESET -3: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 3b - - li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET - li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET -4: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 4b - - mfmsr r3 /* now that the vectors have */ - lis r7, MSR_IP@h /* relocated into low memory */ - ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */ - andc r3, r3, r7 /* (if it was on) */ - SYNC /* Some chip revs need this... */ - mtmsr r3 - SYNC - - mtlr r4 /* restore link register */ - blr |