diff options
Diffstat (limited to 'arch/ppc/cpu/mpc512x/cpu.c')
| -rw-r--r-- | arch/ppc/cpu/mpc512x/cpu.c | 216 |
1 files changed, 216 insertions, 0 deletions
diff --git a/arch/ppc/cpu/mpc512x/cpu.c b/arch/ppc/cpu/mpc512x/cpu.c new file mode 100644 index 0000000..09cbd20 --- /dev/null +++ b/arch/ppc/cpu/mpc512x/cpu.c @@ -0,0 +1,216 @@ +/* + * (C) Copyright 2007-2010 DENX Software Engineering + * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * CPU specific code for the MPC512x family. + * + * Derived from the MPC83xx code. + */ + +#include <common.h> +#include <command.h> +#include <net.h> +#include <netdev.h> +#include <asm/processor.h> +#include <asm/io.h> + +#if defined(CONFIG_OF_LIBFDT) +#include <fdt_support.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +int checkcpu (void) +{ + volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; + ulong clock = gd->cpu_clk; + u32 pvr = get_pvr (); + u32 spridr = in_be32(&immr->sysconf.spridr); + char buf1[32], buf2[32]; + + puts ("CPU: "); + + switch (spridr & 0xffff0000) { + case SPR_5121E: + puts ("MPC5121e "); + break; + default: + printf ("Unknown part ID %08x ", spridr & 0xffff0000); + } + printf ("rev. %d.%d, Core ", SVR_MJREV (spridr), SVR_MNREV (spridr)); + + switch (pvr & 0xffff0000) { + case PVR_E300C4: + puts ("e300c4 "); + break; + default: + puts ("unknown "); + } + printf ("at %s MHz, CSB at %s MHz (RSR=0x%04lx)\n", + strmhz(buf1, clock), + strmhz(buf2, gd->csb_clk), + gd->reset_status & 0xffff); + return 0; +} + + +int +do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + ulong msr; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; + + /* Interrupts and MMU off */ + __asm__ __volatile__ ("mfmsr %0":"=r" (msr):); + + msr &= ~( MSR_EE | MSR_IR | MSR_DR); + __asm__ __volatile__ ("mtmsr %0"::"r" (msr)); + + /* + * Enable Reset Control Reg - "RSTE" is the magic word that let us go + */ + out_be32(&immap->reset.rpr, 0x52535445); + + /* Verify Reset Control Reg is enabled */ + while (!(in_be32(&immap->reset.rcer) & RCER_CRE)) + ; + + printf ("Resetting the board.\n"); + udelay(200); + + /* Perform reset */ + out_be32(&immap->reset.rcr, RCR_SWHR); + + /* Unreached... */ + return 1; +} + + +/* + * Get timebase clock frequency (like cpu_clk in Hz) + */ +unsigned long get_tbclk (void) +{ + ulong tbclk; + + tbclk = (gd->bus_clk + 3L) / 4L; + + return tbclk; +} + + +#if defined(CONFIG_WATCHDOG) +void watchdog_reset (void) +{ + int re_enable = disable_interrupts (); + + /* Reset watchdog */ + volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; + out_be32(&immr->wdt.swsrr, 0x556c); + out_be32(&immr->wdt.swsrr, 0xaa39); + + if (re_enable) + enable_interrupts (); +} +#endif + +#ifdef CONFIG_OF_LIBFDT + +#ifdef CONFIG_OF_SUPPORT_OLD_DEVICE_TREES +/* + * fdt setup for old device trees + * fix up + * cpu clocks + * soc clocks + * ethernet addresses + */ +static void old_ft_cpu_setup(void *blob, bd_t *bd) +{ + /* + * avoid fixing up by path because that + * produces scary error messages + */ + uchar enetaddr[6]; + + /* + * old device trees have ethernet nodes with + * device_type = "network" + */ + eth_getenv_enetaddr("ethaddr", enetaddr); + do_fixup_by_prop(blob, "device_type", "network", 8, + "local-mac-address", enetaddr, 6, 0); + do_fixup_by_prop(blob, "device_type", "network", 8, + "address", enetaddr, 6, 0); + /* + * old device trees have soc nodes with + * device_type = "soc" + */ + do_fixup_by_prop_u32(blob, "device_type", "soc", 4, + "bus-frequency", bd->bi_ipsfreq, 0); +} +#endif + +static void ft_clock_setup(void *blob, bd_t *bd) +{ + char *cpu_path = "/cpus/" OF_CPU; + + /* + * fixup cpu clocks using path + */ + do_fixup_by_path_u32(blob, cpu_path, + "timebase-frequency", OF_TBCLK, 1); + do_fixup_by_path_u32(blob, cpu_path, + "bus-frequency", bd->bi_busfreq, 1); + do_fixup_by_path_u32(blob, cpu_path, + "clock-frequency", bd->bi_intfreq, 1); + /* + * fixup soc clocks using compatible + */ + do_fixup_by_compat_u32(blob, OF_SOC_COMPAT, + "bus-frequency", bd->bi_ipsfreq, 1); +} + +void ft_cpu_setup(void *blob, bd_t *bd) +{ +#ifdef CONFIG_OF_SUPPORT_OLD_DEVICE_TREES + old_ft_cpu_setup(blob, bd); +#endif + ft_clock_setup(blob, bd); +#ifdef CONFIG_HAS_ETH0 + fdt_fixup_ethernet(blob); +#endif + fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); +} +#endif + +#ifdef CONFIG_MPC512x_FEC +/* Default initializations for FEC controllers. To override, + * create a board-specific function called: + * int board_eth_init(bd_t *bis) + */ + +int cpu_eth_init(bd_t *bis) +{ + return mpc512x_fec_initialize(bis); +} +#endif |