diff options
Diffstat (limited to 'arch/powerpc')
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/fdt.c | 48 |
1 files changed, 39 insertions, 9 deletions
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index 62c7ea1..977770e 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -688,6 +688,12 @@ void ft_cpu_setup(void *blob, bd_t *bd) #define CCSR_VIRT_TO_PHYS(x) \ (CONFIG_SYS_CCSRBAR_PHYS + ((x) - CONFIG_SYS_CCSRBAR)) +static void msg(const char *name, uint64_t uaddr, uint64_t daddr) +{ + printf("Warning: U-Boot configured %s at address %llx,\n" + "but the device tree has it at %llx\n", name, uaddr, daddr); +} + /* * Verify the device tree * @@ -703,33 +709,32 @@ void ft_cpu_setup(void *blob, bd_t *bd) */ int ft_verify_fdt(void *fdt) { - uint64_t ccsr = 0; + uint64_t addr = 0; int aliases; int off; /* First check the CCSR base address */ off = fdt_node_offset_by_prop_value(fdt, -1, "device_type", "soc", 4); if (off > 0) - ccsr = fdt_get_base_address(fdt, off); + addr = fdt_get_base_address(fdt, off); - if (!ccsr) { + if (!addr) { printf("Warning: could not determine base CCSR address in " "device tree\n"); /* No point in checking anything else */ return 0; } - if (ccsr != CONFIG_SYS_CCSRBAR_PHYS) { - printf("Warning: U-Boot configured CCSR at address %llx,\n" - "but the device tree has it at %llx\n", - (uint64_t) CONFIG_SYS_CCSRBAR_PHYS, ccsr); + if (addr != CONFIG_SYS_CCSRBAR_PHYS) { + msg("CCSR", CONFIG_SYS_CCSRBAR_PHYS, addr); /* No point in checking anything else */ return 0; } /* - * Get the 'aliases' node. If there isn't one, then there's nothing - * left to do. + * Check some nodes via aliases. We assume that U-Boot and the device + * tree enumerate the devices equally. E.g. the first serial port in + * U-Boot is the same as "serial0" in the device tree. */ aliases = fdt_path_offset(fdt, "/aliases"); if (aliases > 0) { @@ -746,5 +751,30 @@ int ft_verify_fdt(void *fdt) #endif } + /* + * The localbus node is typically a root node, even though the lbc + * controller is part of CCSR. If we were to put the lbc node under + * the SOC node, then the 'ranges' property in the lbc node would + * translate through the 'ranges' property of the parent SOC node, and + * we don't want that. Since it's a separate node, it's possible for + * the 'reg' property to be wrong, so check it here. For now, we + * only check for "fsl,elbc" nodes. + */ +#ifdef CONFIG_SYS_LBC_ADDR + off = fdt_node_offset_by_compatible(fdt, -1, "fsl,elbc"); + if (off > 0) { + const u32 *reg = fdt_getprop(fdt, off, "reg", NULL); + if (reg) { + uint64_t uaddr = CCSR_VIRT_TO_PHYS(CONFIG_SYS_LBC_ADDR); + + addr = fdt_translate_address(fdt, off, reg); + if (uaddr != addr) { + msg("the localbus", uaddr, addr); + return 0; + } + } + } +#endif + return 1; } |