summaryrefslogtreecommitdiff
path: root/arch/powerpc
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc')
-rw-r--r--arch/powerpc/cpu/mpc85xx/cmd_errata.c114
-rw-r--r--arch/powerpc/cpu/mpc85xx/cpu.c14
-rw-r--r--arch/powerpc/cpu/mpc85xx/cpu_init.c12
-rw-r--r--arch/powerpc/cpu/mpc85xx/ddr-gen1.c4
-rw-r--r--arch/powerpc/cpu/mpc85xx/ddr-gen2.c9
-rw-r--r--arch/powerpc/cpu/mpc85xx/ddr-gen3.c14
-rw-r--r--arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c20
-rw-r--r--arch/powerpc/cpu/mpc85xx/release.S35
-rw-r--r--arch/powerpc/cpu/mpc86xx/ddr-8641.c4
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c10
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/util.c14
-rw-r--r--arch/powerpc/cpu/mpc8xxx/fdt.c6
-rw-r--r--arch/powerpc/include/asm/config_mpc85xx.h20
-rw-r--r--arch/powerpc/include/asm/immap_83xx.h6
-rw-r--r--arch/powerpc/include/asm/immap_85xx.h27
-rw-r--r--arch/powerpc/include/asm/immap_86xx.h8
16 files changed, 236 insertions, 81 deletions
diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index 2be192d..e5ecf5d 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -24,6 +24,109 @@
#include <command.h>
#include <linux/compiler.h>
#include <asm/processor.h>
+#include "fsl_corenet_serdes.h"
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004849
+/*
+ * This work-around is implemented in PBI, so just check to see if the
+ * work-around was actually applied. To do this, we check for specific data
+ * at specific addresses in DCSR.
+ *
+ * Array offsets[] contains a list of offsets within DCSR. According to the
+ * erratum document, the value at each offset should be 2.
+ */
+static void check_erratum_a4849(uint32_t svr)
+{
+ void __iomem *dcsr = (void *)CONFIG_SYS_DCSRBAR + 0xb0000;
+ unsigned int i;
+
+#if defined(CONFIG_PPC_P2041) || defined(CONFIG_PPC_P3041)
+ static const uint8_t offsets[] = {
+ 0x50, 0x54, 0x58, 0x90, 0x94, 0x98
+ };
+#endif
+#ifdef CONFIG_PPC_P4080
+ static const uint8_t offsets[] = {
+ 0x60, 0x64, 0x68, 0x6c, 0xa0, 0xa4, 0xa8, 0xac
+ };
+#endif
+ uint32_t x108; /* The value that should be at offset 0x108 */
+
+ for (i = 0; i < ARRAY_SIZE(offsets); i++) {
+ if (in_be32(dcsr + offsets[i]) != 2) {
+ printf("Work-around for Erratum A004849 is not enabled\n");
+ return;
+ }
+ }
+
+#if defined(CONFIG_PPC_P2041) || defined(CONFIG_PPC_P3041)
+ x108 = 0x12;
+#endif
+
+#ifdef CONFIG_PPC_P4080
+ /*
+ * For P4080, the erratum document says that the value at offset 0x108
+ * should be 0x12 on rev2, or 0x1c on rev3.
+ */
+ if (SVR_MAJ(svr) == 2)
+ x108 = 0x12;
+ if (SVR_MAJ(svr) == 3)
+ x108 = 0x1c;
+#endif
+
+ if (in_be32(dcsr + 0x108) != x108) {
+ printf("Work-around for Erratum A004849 is not enabled\n");
+ return;
+ }
+
+ /* Everything matches, so the erratum work-around was applied */
+
+ printf("Work-around for Erratum A004849 enabled\n");
+}
+#endif
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004580
+/*
+ * This work-around is implemented in PBI, so just check to see if the
+ * work-around was actually applied. To do this, we check for specific data
+ * at specific addresses in the SerDes register block.
+ *
+ * The work-around says that for each SerDes lane, write BnTTLCRy0 =
+ * 0x1B00_0001, Register 2 = 0x0088_0000, and Register 3 = 0x4000_0000.
+
+ */
+static void check_erratum_a4580(uint32_t svr)
+{
+ const serdes_corenet_t __iomem *srds_regs =
+ (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
+ unsigned int lane;
+
+ for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
+ if (serdes_lane_enabled(lane)) {
+ const struct serdes_lane __iomem *srds_lane =
+ &srds_regs->lane[serdes_get_lane_idx(lane)];
+
+ /*
+ * Verify that the values we were supposed to write in
+ * the PBI are actually there. Also, the lower 15
+ * bits of res4[3] should be the same as the upper 15
+ * bits of res4[1].
+ */
+ if ((in_be32(&srds_lane->ttlcr0) != 0x1b000001) ||
+ (in_be32(&srds_lane->res4[1]) != 0x880000) ||
+ (in_be32(&srds_lane->res4[3]) != 0x40000044)) {
+ printf("Work-around for Erratum A004580 is "
+ "not enabled\n");
+ return;
+ }
+ }
+ }
+
+ /* Everything matches, so the erratum work-around was applied */
+
+ printf("Work-around for Erratum A004580 enabled\n");
+}
+#endif
static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
@@ -137,6 +240,17 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
puts("Work-around for Erratum A004934 enabled\n");
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004849
+ /* This work-around is implemented in PBI, so just check for it */
+ check_erratum_a4849(svr);
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004580
+ /* This work-around is implemented in PBI, so just check for it */
+ check_erratum_a4580(svr);
+#endif
+#ifdef CONFIG_SYS_P4080_ERRATUM_PCIE_A003
+ puts("Work-around for Erratum PCIe-A003 enabled\n");
+#endif
return 0;
}
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 78486aa..9b9832c 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -451,21 +451,21 @@ static void dump_spd_ddr_reg(void)
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
switch (i) {
case 0:
- ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+ ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
break;
-#if defined(CONFIG_SYS_MPC85xx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
+#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
case 1:
- ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
+ ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
break;
#endif
-#if defined(CONFIG_SYS_MPC85xx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
case 2:
- ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR3_ADDR;
+ ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR;
break;
#endif
-#if defined(CONFIG_SYS_MPC85xx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
case 3:
- ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR4_ADDR;
+ ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR;
break;
#endif
default:
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 705c16c..d1155e8 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -350,6 +350,10 @@ int cpu_init_r(void)
#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2;
#endif
+#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
+ extern int spin_table_compat;
+ const char *spin;
+#endif
#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
@@ -395,6 +399,14 @@ int cpu_init_r(void)
}
#endif
+#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
+ spin = getenv("spin_table_compat");
+ if (spin && (*spin == 'n'))
+ spin_table_compat = 0;
+ else
+ spin_table_compat = 1;
+#endif
+
puts ("L2: ");
#if defined(CONFIG_L2_CACHE)
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c b/arch/powerpc/cpu/mpc85xx/ddr-gen1.c
index 54437dd..8a86819 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen1.c
@@ -18,7 +18,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
unsigned int ctrl_num)
{
unsigned int i;
- volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+ volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
if (ctrl_num != 0) {
printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
@@ -73,7 +73,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
void
ddr_enable_ecc(unsigned int dram_size)
{
- volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+ volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR);
dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size);
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c
index 49000a1..a705862 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c
@@ -19,15 +19,12 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
unsigned int ctrl_num)
{
unsigned int i;
-#ifdef CONFIG_MPC83xx
- ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC83xx_DDR_ADDR;
-#else
- ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
-#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
+ ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
+
+#if defined(CONFIG_SYS_FSL_ERRATUM_NMG_DDR120) && defined(CONFIG_MPC85xx)
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
uint svr;
#endif
-#endif
if (ctrl_num) {
printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
index f118dd5..ef0dd1d 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
@@ -32,21 +32,21 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
switch (ctrl_num) {
case 0:
- ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+ ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
break;
-#if defined(CONFIG_SYS_MPC85xx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
+#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
case 1:
- ddr = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
+ ddr = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
break;
#endif
-#if defined(CONFIG_SYS_MPC85xx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
case 2:
- ddr = (void *)CONFIG_SYS_MPC85xx_DDR3_ADDR;
+ ddr = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR;
break;
#endif
-#if defined(CONFIG_SYS_MPC85xx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
case 3:
- ddr = (void *)CONFIG_SYS_MPC85xx_DDR4_ADDR;
+ ddr = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR;
break;
#endif
default:
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
index 7f466ac..5495dc5 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
@@ -714,9 +714,13 @@ void fsl_serdes_init(void)
#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9
/*
- * Set BnTTLCRy0[FLT_SEL] = 000011 and set BnTTLCRy0[17] = 1 for
- * each of the SerDes lanes selected as SGMII, XAUI, SRIO, or
- * AURORA before the device is initialized.
+ * Set BnTTLCRy0[FLT_SEL] = 011011 and set BnTTLCRy0[31] = 1
+ * for each of the SerDes lanes selected as SGMII, XAUI, SRIO,
+ * or AURORA before the device is initialized.
+ *
+ * Note that this part of the SERDES-9 work-around is
+ * redundant if the work-around for A-4580 has already been
+ * applied via PBI.
*/
switch (lane_prtcl) {
case SGMII_FM1_DTSEC1:
@@ -733,10 +737,12 @@ void fsl_serdes_init(void)
case SRIO1:
case SRIO2:
case AURORA:
- clrsetbits_be32(&srds_regs->lane[idx].ttlcr0,
- SRDS_TTLCR0_FLT_SEL_MASK,
- SRDS_TTLCR0_FLT_SEL_750PPM |
- SRDS_TTLCR0_PM_DIS);
+ out_be32(&srds_regs->lane[idx].ttlcr0,
+ SRDS_TTLCR0_FLT_SEL_KFR_26 |
+ SRDS_TTLCR0_FLT_SEL_KPH_28 |
+ SRDS_TTLCR0_FLT_SEL_750PPM |
+ SRDS_TTLCR0_FREQOVD_EN);
+ break;
default:
break;
}
diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S
index 4ba44a9..1f76925 100644
--- a/arch/powerpc/cpu/mpc85xx/release.S
+++ b/arch/powerpc/cpu/mpc85xx/release.S
@@ -351,6 +351,13 @@ __secondary_reset_vector:
.align L1_CACHE_SHIFT
.global __second_half_boot_page
__second_half_boot_page:
+#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE
+ lis r3,(spin_table_compat - __second_half_boot_page)@h
+ ori r3,r3,(spin_table_compat - __second_half_boot_page)@l
+ add r3,r3,r11 /* r11 has the address of __second_half_boot_page */
+ lwz r14,0(r3)
+#endif
+
#define EPAPR_MAGIC 0x45504150
#define ENTRY_ADDR_UPPER 0
#define ENTRY_ADDR_LOWER 4
@@ -383,7 +390,24 @@ __second_half_boot_page:
stw r8,ENTRY_ADDR_LOWER(r10)
/* spin waiting for addr */
-3: lwz r4,ENTRY_ADDR_LOWER(r10)
+3:
+/*
+ * To comply with ePAPR 1.1, the spin table has been moved to cache-enabled
+ * memory. Old OS may not work with this change. A patch is waiting to be
+ * accepted for Linux kernel. Other OS needs similar fix to spin table.
+ * For OSes with old spin table code, we can enable this temporary fix by
+ * setting environmental variable "spin_table_compat". For new OSes, set
+ * "spin_table_compat=no". After Linux is fixed, we can remove this macro
+ * and related code. For now, it is enabled by default.
+ */
+#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE
+ cmpwi r14,0
+ beq 4f
+ dcbf 0, r10
+ sync
+4:
+#endif
+ lwz r4,ENTRY_ADDR_LOWER(r10)
andi. r11,r4,1
bne 3b
isync
@@ -460,5 +484,14 @@ __second_half_boot_page:
.globl __spin_table
__spin_table:
.space CONFIG_MAX_CPUS*ENTRY_SIZE
+
+#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE
+ .align L1_CACHE_SHIFT
+ .global spin_table_compat
+spin_table_compat:
+ .long 1
+
+#endif
+
__spin_table_end:
.space 4096 - (__spin_table_end - __spin_table)
diff --git a/arch/powerpc/cpu/mpc86xx/ddr-8641.c b/arch/powerpc/cpu/mpc86xx/ddr-8641.c
index b8f2c93..92ba26d 100644
--- a/arch/powerpc/cpu/mpc86xx/ddr-8641.c
+++ b/arch/powerpc/cpu/mpc86xx/ddr-8641.c
@@ -22,10 +22,10 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
switch (ctrl_num) {
case 0:
- ddr = (void *)CONFIG_SYS_MPC86xx_DDR_ADDR;
+ ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
break;
case 1:
- ddr = (void *)CONFIG_SYS_MPC86xx_DDR2_ADDR;
+ ddr = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
break;
default:
printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
index 088cc0e..8016bcd 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
@@ -18,15 +18,7 @@
#include "ddr.h"
-#ifdef CONFIG_MPC83xx
- #define _DDR_ADDR CONFIG_SYS_MPC83xx_DDR_ADDR
-#elif defined(CONFIG_MPC85xx)
- #define _DDR_ADDR CONFIG_SYS_MPC85xx_DDR_ADDR
-#elif defined(CONFIG_MPC86xx)
- #define _DDR_ADDR CONFIG_SYS_MPC86xx_DDR_ADDR
-#else
- #error "Undefined _DDR_ADDR"
-#endif
+#define _DDR_ADDR CONFIG_SYS_MPC8xxx_DDR_ADDR
static u32 fsl_ddr_get_version(void)
{
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
index 940ffff..acfe1f0 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
@@ -133,14 +133,8 @@ u32 fsl_ddr_get_intl3r(void)
void board_add_ram_info(int use_default)
{
-#if defined(CONFIG_MPC83xx)
- immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- ccsr_ddr_t *ddr = (void *)&immap->ddr;
-#elif defined(CONFIG_MPC85xx)
- ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
-#elif defined(CONFIG_MPC86xx)
- ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC86xx_DDR_ADDR);
-#endif
+ ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR);
+
#if defined(CONFIG_E6500) && (CONFIG_NUM_DDR_CONTROLLERS == 3)
u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
#endif
@@ -152,13 +146,13 @@ void board_add_ram_info(int use_default)
#if CONFIG_NUM_DDR_CONTROLLERS >= 2
if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
- ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
+ ddr = (void __iomem *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
sdram_cfg = in_be32(&ddr->sdram_cfg);
}
#endif
#if CONFIG_NUM_DDR_CONTROLLERS >= 3
if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
- ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR3_ADDR;
+ ddr = (void __iomem *)CONFIG_SYS_MPC8xxx_DDR3_ADDR;
sdram_cfg = in_be32(&ddr->sdram_cfg);
}
#endif
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index 68db8e2..1986fea 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -217,7 +217,7 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
#if CONFIG_SYS_FSL_SEC_COMPAT == 2 /* SEC 2.x/3.x */
void fdt_fixup_crypto_node(void *blob, int sec_rev)
{
- const struct sec_rev_prop {
+ static const struct sec_rev_prop {
u32 sec_rev;
u32 num_channels;
u32 channel_fifo_len;
@@ -232,8 +232,8 @@ void fdt_fixup_crypto_node(void *blob, int sec_rev)
{ 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */
{ 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */
};
- char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) *
- sizeof("fsl,secX.Y")];
+ static char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) *
+ sizeof("fsl,secX.Y")];
int crypto_node, sec_idx, err;
char *p;
u32 val;
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 03baaee..0b9638b 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -27,6 +27,12 @@
#error "Do not define CONFIG_SYS_CCSRBAR_DEFAULT in the board header file."
#endif
+/*
+ * This macro should be removed when we no longer care about backwards
+ * compatibility with older operating systems.
+ */
+#define CONFIG_PPC_SPINTABLE_COMPATIBLE
+
#define FSL_DDR_VER_4_7 47
/* Number of TLB CAM entries we have on FSL Book-E chips */
@@ -131,7 +137,6 @@
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 3
#define CONFIG_TSECV2
#define CONFIG_SYS_FSL_SEC_COMPAT 4
-#define CONFIG_FSL_SATA_V2
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
@@ -175,7 +180,6 @@
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
#define CONFIG_TSECV2
#define CONFIG_SYS_FSL_SEC_COMPAT 2
-#define CONFIG_FSL_SATA_V2
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
@@ -188,7 +192,6 @@
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 3
#define CONFIG_TSECV2
#define CONFIG_SYS_FSL_SEC_COMPAT 4
-#define CONFIG_FSL_SATA_V2
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
@@ -242,7 +245,6 @@
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
#define CONFIG_TSECV2
#define CONFIG_SYS_FSL_SEC_COMPAT 2
-#define CONFIG_FSL_SATA_V2
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
@@ -318,7 +320,6 @@
#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_SEC_COMPAT 4
-#define CONFIG_FSL_SATA_V2
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 5
#define CONFIG_SYS_NUM_FM1_10GEC 1
@@ -343,6 +344,7 @@
#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 0x11
#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+#define CONFIG_SYS_FSL_ERRATUM_A004849
#elif defined(CONFIG_PPC_P3041)
#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
@@ -350,7 +352,6 @@
#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_SEC_COMPAT 4
-#define CONFIG_FSL_SATA_V2
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 5
#define CONFIG_SYS_NUM_FM1_10GEC 1
@@ -375,6 +376,7 @@
#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 0x11
#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+#define CONFIG_SYS_FSL_ERRATUM_A004849
#elif defined(CONFIG_PPC_P4080) /* also supports P4040 */
#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
@@ -417,6 +419,9 @@
#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x20
#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xff000000
#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+#define CONFIG_SYS_FSL_ERRATUM_A004849
+#define CONFIG_SYS_FSL_ERRATUM_A004580
+#define CONFIG_SYS_P4080_ERRATUM_PCIE_A003
#elif defined(CONFIG_PPC_P5020) /* also supports P5010 */
#define CONFIG_SYS_PPC64 /* 64-bit core */
@@ -425,7 +430,6 @@
#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_SEC_COMPAT 4
-#define CONFIG_FSL_SATA_V2
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 5
#define CONFIG_SYS_NUM_FM1_10GEC 1
@@ -449,6 +453,7 @@
#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
#elif defined(CONFIG_PPC_P5040)
+#define CONFIG_SYS_PPC64
#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
#define CONFIG_MAX_CPUS 4
#define CONFIG_SYS_FSL_NUM_CC_PLLS 3
@@ -472,7 +477,6 @@
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
#define CONFIG_SYS_FSL_ERRATUM_A004699
-#define CONFIG_SYS_FSL_ELBC_MULTIBIT_ECC
#define CONFIG_SYS_FSL_ERRATUM_A004510
#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10
#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h
index 679832c..8ac13fc 100644
--- a/arch/powerpc/include/asm/immap_83xx.h
+++ b/arch/powerpc/include/asm/immap_83xx.h
@@ -1035,9 +1035,9 @@ typedef struct immap {
} immap_t;
#endif
-#define CONFIG_SYS_MPC83xx_DDR_OFFSET (0x2000)
-#define CONFIG_SYS_MPC83xx_DDR_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_DDR_OFFSET)
+#define CONFIG_SYS_MPC8xxx_DDR_OFFSET (0x2000)
+#define CONFIG_SYS_MPC8xxx_DDR_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET)
#define CONFIG_SYS_MPC83xx_DMA_OFFSET (0x8000)
#define CONFIG_SYS_MPC83xx_DMA_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_DMA_OFFSET)
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 969f726..296b549 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2619,7 +2619,7 @@ typedef struct serdes_corenet {
#define SRDS_PCCR2_RST_XGMII1 0x00800000
#define SRDS_PCCR2_RST_XGMII2 0x00400000
u32 res5[197];
- struct {
+ struct serdes_lane {
u32 gcr0; /* General Control Register 0 */
#define SRDS_GCR0_RRST 0x00400000
#define SRDS_GCR0_1STLANE 0x00010000
@@ -2637,8 +2637,11 @@ typedef struct serdes_corenet {
u32 res3;
u32 ttlcr0; /* Transition Tracking Loop Ctrl 0 */
#define SRDS_TTLCR0_FLT_SEL_MASK 0x3f000000
+#define SRDS_TTLCR0_FLT_SEL_KFR_26 0x10000000
+#define SRDS_TTLCR0_FLT_SEL_KPH_28 0x08000000
#define SRDS_TTLCR0_FLT_SEL_750PPM 0x03000000
#define SRDS_TTLCR0_PM_DIS 0x00004000
+#define SRDS_TTLCR0_FREQOVD_EN 0x00000001
u32 res4[7];
} lane[24];
u32 res6[384];
@@ -2867,9 +2870,9 @@ struct ccsr_pman {
#define CONFIG_SYS_FSL_CORENET_PMAN2_OFFSET 0x5000
#define CONFIG_SYS_FSL_CORENET_PMAN3_OFFSET 0x6000
#endif
-#define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x8000
-#define CONFIG_SYS_MPC85xx_DDR2_OFFSET 0x9000
-#define CONFIG_SYS_MPC85xx_DDR3_OFFSET 0xA000
+#define CONFIG_SYS_MPC8xxx_DDR_OFFSET 0x8000
+#define CONFIG_SYS_MPC8xxx_DDR2_OFFSET 0x9000
+#define CONFIG_SYS_MPC8xxx_DDR3_OFFSET 0xA000
#define CONFIG_SYS_FSL_CORENET_CLK_OFFSET 0xE1000
#define CONFIG_SYS_FSL_CORENET_RCPM_OFFSET 0xE2000
#define CONFIG_SYS_FSL_CORENET_SERDES_OFFSET 0xEA000
@@ -2929,9 +2932,9 @@ struct ccsr_pman {
#define CONFIG_SYS_FSL_CLUSTER_1_L2_OFFSET 0xC20000
#else
#define CONFIG_SYS_MPC85xx_ECM_OFFSET 0x0000
-#define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x2000
+#define CONFIG_SYS_MPC8xxx_DDR_OFFSET 0x2000
#define CONFIG_SYS_MPC85xx_LBC_OFFSET 0x5000
-#define CONFIG_SYS_MPC85xx_DDR2_OFFSET 0x6000
+#define CONFIG_SYS_MPC8xxx_DDR2_OFFSET 0x6000
#define CONFIG_SYS_MPC85xx_ESPI_OFFSET 0x7000
#define CONFIG_SYS_MPC85xx_PCI1_OFFSET 0x8000
#define CONFIG_SYS_MPC85xx_PCIX_OFFSET 0x8000
@@ -2998,12 +3001,12 @@ struct ccsr_pman {
(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_RCPM_OFFSET)
#define CONFIG_SYS_MPC85xx_ECM_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ECM_OFFSET)
-#define CONFIG_SYS_MPC85xx_DDR_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR_OFFSET)
-#define CONFIG_SYS_MPC85xx_DDR2_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR2_OFFSET)
-#define CONFIG_SYS_MPC85xx_DDR3_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR3_OFFSET)
+#define CONFIG_SYS_MPC8xxx_DDR_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET)
+#define CONFIG_SYS_MPC8xxx_DDR2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR2_OFFSET)
+#define CONFIG_SYS_MPC8xxx_DDR3_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR3_OFFSET)
#define CONFIG_SYS_LBC_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET)
#define CONFIG_SYS_IFC_ADDR \
diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h
index cc338e4..2a704fe 100644
--- a/arch/powerpc/include/asm/immap_86xx.h
+++ b/arch/powerpc/include/asm/immap_86xx.h
@@ -1252,10 +1252,10 @@ typedef struct immap {
extern immap_t *immr;
-#define CONFIG_SYS_MPC86xx_DDR_OFFSET 0x2000
-#define CONFIG_SYS_MPC86xx_DDR_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DDR_OFFSET)
-#define CONFIG_SYS_MPC86xx_DDR2_OFFSET 0x6000
-#define CONFIG_SYS_MPC86xx_DDR2_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DDR2_OFFSET)
+#define CONFIG_SYS_MPC8xxx_DDR_OFFSET 0x2000
+#define CONFIG_SYS_MPC8xxx_DDR_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET)
+#define CONFIG_SYS_MPC8xxx_DDR2_OFFSET 0x6000
+#define CONFIG_SYS_MPC8xxx_DDR2_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR2_OFFSET)
#define CONFIG_SYS_MPC86xx_DMA_OFFSET 0x21000
#define CONFIG_SYS_MPC86xx_DMA_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DMA_OFFSET)
#define CONFIG_SYS_MPC86xx_PIC_OFFSET 0x40000
generated by cgit v1.1 at 2024-12-24 05:23:08 +0000