diff options
Diffstat (limited to 'arch/powerpc')
| -rw-r--r-- | arch/powerpc/cpu/mpc824x/cpu_init.c | 88 |
1 files changed, 0 insertions, 88 deletions
diff --git a/arch/powerpc/cpu/mpc824x/cpu_init.c b/arch/powerpc/cpu/mpc824x/cpu_init.c index 47ac18e..68d88e9 100644 --- a/arch/powerpc/cpu/mpc824x/cpu_init.c +++ b/arch/powerpc/cpu/mpc824x/cpu_init.c @@ -46,8 +46,6 @@ void cpu_init_f (void) { -/* MOUSSE board is initialized in asm */ -#if !defined(CONFIG_MOUSSE) register unsigned long val; CONFIG_WRITE_HALFWORD(PCICR, 0x06); /* Bus Master, respond to PCI memory space acesses*/ /* CONFIG_WRITE_HALFWORD(PCISR, 0xffff); */ /*reset PCISR*/ @@ -302,98 +300,12 @@ cpu_init_f (void) CONFIG_READ_WORD(MCCR1, val); CONFIG_WRITE_WORD(MCCR1, val | MCCR1_MEMGO); /* set memory access going */ __asm__ __volatile__("eieio"); - -#endif /* !CONFIG_MOUSSE */ } - -#ifdef CONFIG_MOUSSE -#ifdef INCLUDE_MPC107_REPORT -struct MPC107_s { - unsigned int iobase; - char desc[120]; -} MPC107Regs[] = { - { BMC_BASE + 0x00, "MPC107 Vendor/Device ID" }, - { BMC_BASE + 0x04, "MPC107 PCI Command/Status Register" }, - { BMC_BASE + 0x08, "MPC107 Revision" }, - { BMC_BASE + 0x0C, "MPC107 Cache Line Size" }, - { BMC_BASE + 0x10, "MPC107 LMBAR" }, - { BMC_BASE + 0x14, "MPC824x PCSR" }, - { BMC_BASE + 0xA8, "MPC824x PICR1" }, - { BMC_BASE + 0xAC, "MPC824x PICR2" }, - { BMC_BASE + 0x46, "MPC824x PACR" }, - { BMC_BASE + 0x310, "MPC824x ITWR" }, - { BMC_BASE + 0x300, "MPC824x OMBAR" }, - { BMC_BASE + 0x308, "MPC824x OTWR" }, - { BMC_BASE + 0x14, "MPC107 Peripheral Control and Status Register" }, - { BMC_BASE + 0x78, "MPC107 EUMBAR" }, - { BMC_BASE + 0xC0, "MPC107 Processor Bus Error Status" }, - { BMC_BASE + 0xC4, "MPC107 PCI Bus Error Status" }, - { BMC_BASE + 0xC8, "MPC107 Processor/PCI Error Address" }, - { BMC_BASE + 0xE0, "MPC107 AMBOR Register" }, - { BMC_BASE + 0xF0, "MPC107 MCCR1 Register" }, - { BMC_BASE + 0xF4, "MPC107 MCCR2 Register" }, - { BMC_BASE + 0xF8, "MPC107 MCCR3 Register" }, - { BMC_BASE + 0xFC, "MPC107 MCCR4 Register" }, -}; -#define N_MPC107_Regs (sizeof(MPC107Regs)/sizeof(MPC107Regs[0])) -#endif /* INCLUDE_MPC107_REPORT */ -#endif /* CONFIG_MOUSSE */ - /* * initialize higher level parts of CPU like time base and timers */ int cpu_init_r (void) { -#ifdef CONFIG_MOUSSE -#ifdef INCLUDE_MPC107_REPORT - unsigned int tmp = 0, i; -#endif - /* - * Initialize the EUMBBAR (Embedded Util Mem Block Base Addr Reg). - * This is necessary before the EPIC, DMA ctlr, I2C ctlr, etc. can - * be accessed. - */ - -#ifdef CONFIG_MPC8240 /* only on MPC8240 */ - mpc824x_mpc107_setreg (EUMBBAR, EUMBBAR_VAL); - /* MOT/SPS: Issue #10002, PCI (FD Alias enable) */ - mpc824x_mpc107_setreg (AMBOR, 0x000000C0); -#endif - - -#ifdef INCLUDE_MPC107_REPORT - /* Check MPC824x PCI Device and Vendor ID */ - while ((tmp = mpc824x_mpc107_getreg (BMC_BASE)) != 0x31057) { - printf (" MPC107: offset=0x%x, val = 0x%x\n", - BMC_BASE, - tmp); - } - - for (i = 0; i < N_MPC107_Regs; i++) { - printf (" 0x%x/%s = 0x%x\n", - MPC107Regs[i].iobase, - MPC107Regs[i].desc, - mpc824x_mpc107_getreg (MPC107Regs[i].iobase)); - } - - printf ("IBAT0L = 0x%08X\n", mfspr (IBAT0L)); - printf ("IBAT0U = 0x%08X\n", mfspr (IBAT0U)); - printf ("IBAT1L = 0x%08X\n", mfspr (IBAT1L)); - printf ("IBAT1U = 0x%08X\n", mfspr (IBAT1U)); - printf ("IBAT2L = 0x%08X\n", mfspr (IBAT2L)); - printf ("IBAT2U = 0x%08X\n", mfspr (IBAT2U)); - printf ("IBAT3L = 0x%08X\n", mfspr (IBAT3L)); - printf ("IBAT3U = 0x%08X\n", mfspr (IBAT3U)); - printf ("DBAT0L = 0x%08X\n", mfspr (DBAT0L)); - printf ("DBAT0U = 0x%08X\n", mfspr (DBAT0U)); - printf ("DBAT1L = 0x%08X\n", mfspr (DBAT1L)); - printf ("DBAT1U = 0x%08X\n", mfspr (DBAT1U)); - printf ("DBAT2L = 0x%08X\n", mfspr (DBAT2L)); - printf ("DBAT2U = 0x%08X\n", mfspr (DBAT2U)); - printf ("DBAT3L = 0x%08X\n", mfspr (DBAT3L)); - printf ("DBAT3U = 0x%08X\n", mfspr (DBAT3U)); -#endif /* INCLUDE_MPC107_REPORT */ -#endif /* CONFIG_MOUSSE */ return (0); } |