diff options
Diffstat (limited to 'arch/powerpc')
37 files changed, 326 insertions, 414 deletions
diff --git a/arch/powerpc/cpu/mpc512x/i2c.c b/arch/powerpc/cpu/mpc512x/i2c.c index e2d9097..0ea1280 100644 --- a/arch/powerpc/cpu/mpc512x/i2c.c +++ b/arch/powerpc/cpu/mpc512x/i2c.c @@ -78,9 +78,8 @@ static int wait_for_bb (void) status = mpc_reg_in (®s->msr); while (timeout-- && (status & I2C_BB)) { - volatile int temp; mpc_reg_out (®s->mcr, I2C_STA, I2C_STA); - temp = mpc_reg_in (®s->mdr); + (void)mpc_reg_in(®s->mdr); mpc_reg_out (®s->mcr, 0, I2C_STA); mpc_reg_out (®s->mcr, 0, 0); mpc_reg_out (®s->mcr, I2C_EN, 0); diff --git a/arch/powerpc/cpu/mpc512x/pci.c b/arch/powerpc/cpu/mpc512x/pci.c index 141db8b..16f034d 100644 --- a/arch/powerpc/cpu/mpc512x/pci.c +++ b/arch/powerpc/cpu/mpc512x/pci.c @@ -52,7 +52,6 @@ pci_init_board(void) volatile law512x_t *pci_law; volatile pot512x_t *pci_pot; volatile pcictrl512x_t *pci_ctrl; - volatile pciconf512x_t *pci_conf; u16 reg16; u32 reg32; u32 dev; @@ -73,7 +72,6 @@ pci_init_board(void) pci_law = im->sysconf.pcilaw; pci_pot = im->ios.pot; pci_ctrl = &im->pci_ctrl; - pci_conf = &im->pci_conf; hose = &pci_hose; diff --git a/arch/powerpc/cpu/mpc83xx/spd_sdram.c b/arch/powerpc/cpu/mpc83xx/spd_sdram.c index 3855bfd..04d519a 100644 --- a/arch/powerpc/cpu/mpc83xx/spd_sdram.c +++ b/arch/powerpc/cpu/mpc83xx/spd_sdram.c @@ -149,7 +149,7 @@ long int spd_sdram() unsigned int memsize; unsigned int law_size; unsigned char caslat, caslat_ctrl; - unsigned int trfc, trfc_clk, trfc_low, trfc_high; + unsigned int trfc, trfc_clk, trfc_low; unsigned int trcd_clk, trtp_clk; unsigned char cke_min_clk; unsigned char add_lat, wr_lat; @@ -542,7 +542,6 @@ long int spd_sdram() * so preadjust it down 8 first before splitting it up. */ trfc_low = (trfc_clk - 8) & 0xf; - trfc_high = ((trfc_clk - 8) >> 4) & 0x3; ddr->timing_cfg_1 = (((picos_to_clk(spd.trp * 250) & 0x07) << 28 ) | /* PRETOACT */ diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index a09eb91..2ed5a98 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -53,6 +53,12 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) puts("Work-around for Erratum CPU22 enabled\n"); #endif +#if defined(CONFIG_SYS_FSL_ERRATUM_CPU_A003999) + puts("Work-around for Erratum CPU-A003999 enabled\n"); +#endif +#if defined(CONFIG_SYS_FSL_ERRATUM_DDR_A003474) + puts("Work-around for Erratum DDR-A003473 enabled\n"); +#endif #if defined(CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN) puts("Work-around for DDR MSYNC_IN Erratum enabled\n"); #endif @@ -103,6 +109,10 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_LBC103 puts("Work-around for Erratum NMG_LBC103 enabled\n"); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129 + if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0)) + puts("Work-around for Erratum NMG ETSEC129 enabled\n"); +#endif return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 49c0551..c1815e8 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -42,6 +42,16 @@ DECLARE_GLOBAL_DATA_PTR; +/* + * Default board reset function + */ +static void +__board_reset(void) +{ + /* Do nothing */ +} +void board_reset(void) __attribute__((weak, alias("__board_reset"))); + int checkcpu (void) { sys_info_t sysinfo; @@ -215,7 +225,12 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) mtspr(DBCR0,val); #else volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - out_be32(&gur->rstcr, 0x2); /* HRESET_REQ */ + + /* Attempt board-specific reset */ + board_reset(); + + /* Next try asserting HRESET_REQ */ + out_be32(&gur->rstcr, 0x2); udelay(100); #endif diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 0a4ce53..2e4a06c 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -37,12 +37,15 @@ #include <asm/mmu.h> #include <asm/fsl_law.h> #include <asm/fsl_serdes.h> +#include <linux/compiler.h> #include "mp.h" -#ifdef CONFIG_SYS_QE_FW_IN_NAND +#ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND #include <nand.h> #include <errno.h> #endif +#include "../../../../drivers/block/fsl_sata.h" + DECLARE_GLOBAL_DATA_PTR; extern void srio_init(void); @@ -301,6 +304,7 @@ __attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void); */ int cpu_init_r(void) { + __maybe_unused u32 svr = get_svr(); #ifdef CONFIG_SYS_LBC_LCRR volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; #endif @@ -316,11 +320,9 @@ int cpu_init_r(void) #if defined(CONFIG_L2_CACHE) volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR; volatile uint cache_ctl; - uint svr, ver; - uint l2srbar; + uint ver; u32 l2siz_field; - svr = get_svr(); ver = SVR_SOC_VER(svr); asm("msync;isync"); @@ -385,8 +387,8 @@ int cpu_init_r(void) if (l2cache->l2ctl & MPC85xx_L2CTL_L2E) { puts("already enabled"); - l2srbar = l2cache->l2srbar0; #if defined(CONFIG_SYS_INIT_L2_ADDR) && defined(CONFIG_SYS_FLASH_BASE) + u32 l2srbar = l2cache->l2srbar0; if (l2cache->l2ctl & MPC85xx_L2CTL_L2SRAM_ENTIRE && l2srbar >= CONFIG_SYS_FLASH_BASE) { l2srbar = CONFIG_SYS_INIT_L2_ADDR; @@ -402,8 +404,8 @@ int cpu_init_r(void) puts("enabled\n"); } #elif defined(CONFIG_BACKSIDE_L2_CACHE) - if ((SVR_SOC_VER(get_svr()) == SVR_P2040) || - (SVR_SOC_VER(get_svr()) == SVR_P2040_E)) { + if ((SVR_SOC_VER(svr) == SVR_P2040) || + (SVR_SOC_VER(svr) == SVR_P2040_E)) { puts("N/A\n"); goto skip_l2; } @@ -489,6 +491,32 @@ skip_l2: fman_enet_init(); #endif +#if defined(CONFIG_FSL_SATA_V2) && defined(CONFIG_FSL_SATA_ERRATUM_A001) + /* + * For P1022/1013 Rev1.0 silicon, after power on SATA host + * controller is configured in legacy mode instead of the + * expected enterprise mode. Software needs to clear bit[28] + * of HControl register to change to enterprise mode from + * legacy mode. We assume that the controller is offline. + */ + if (IS_SVR_REV(svr, 1, 0) && + ((SVR_SOC_VER(svr) == SVR_P1022) || + (SVR_SOC_VER(svr) == SVR_P1022_E) || + (SVR_SOC_VER(svr) == SVR_P1013) || + (SVR_SOC_VER(svr) == SVR_P1013_E))) { + fsl_sata_reg_t *reg; + + /* first SATA controller */ + reg = (void *)CONFIG_SYS_MPC85xx_SATA1_ADDR; + clrbits_le32(®->hcontrol, HCONTROL_ENTERPRISE_EN); + + /* second SATA controller */ + reg = (void *)CONFIG_SYS_MPC85xx_SATA2_ADDR; + clrbits_le32(®->hcontrol, HCONTROL_ENTERPRISE_EN); + } +#endif + + return 0; } @@ -524,17 +552,17 @@ void cpu_secondary_init_r(void) { #ifdef CONFIG_QE uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */ -#ifdef CONFIG_SYS_QE_FW_IN_NAND +#ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND int ret; - size_t fw_length = CONFIG_SYS_QE_FW_LENGTH; + size_t fw_length = CONFIG_SYS_QE_FMAN_FW_LENGTH; /* load QE firmware from NAND flash to DDR first */ - ret = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FW_IN_NAND, - &fw_length, (u_char *)CONFIG_SYS_QE_FW_ADDR); + ret = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FMAN_FW_IN_NAND, + &fw_length, (u_char *)CONFIG_SYS_QE_FMAN_FW_ADDR); if (ret && ret == -EUCLEAN) { printf ("NAND read for QE firmware at offset %x failed %d\n", - CONFIG_SYS_QE_FW_IN_NAND, ret); + CONFIG_SYS_QE_FMAN_FW_IN_NAND, ret); } #endif qe_init(qe_base); diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c index 4ef3c9a..091af7c 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c @@ -71,7 +71,7 @@ void cpu_init_early_f(void) #endif #if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) && !defined(CONFIG_SYS_RAMBOOT) ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR; - u32 *l2srbar, *dst, *src; + u32 *dst, *src; void (*setup_ifc_sram)(void); #endif @@ -137,7 +137,7 @@ void cpu_init_early_f(void) dst = (u32 *) SRAM_BASE_ADDR; src = (u32 *) setup_ifc; for (i = 0; i < 1024; i++) - *l2srbar++ = *src++; + *dst++ = *src++; setup_ifc_sram(); diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c index c8c84a1..18e9cc5 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c @@ -115,6 +115,11 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, for (i = 0; i < 32; i++) out_be32(&ddr->debug[i], regs->debug[i]); +#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474 + out_be32(&ddr->debug[12], 0x00000015); + out_be32(&ddr->debug[21], 0x24000000); +#endif /* CONFIG_SYS_FSL_ERRATUM_DDR_A003474 */ + /* Set, but do not enable the memory */ temp_sdram_cfg = regs->ddr_sdram_cfg; temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN); diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index 9d31568..977770e 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -466,7 +466,7 @@ void fdt_fixup_fman_firmware(void *blob) return; } - if (length > CONFIG_SYS_FMAN_FW_LENGTH) { + if (length > CONFIG_SYS_QE_FMAN_FW_LENGTH) { printf("Fman firmware at %p is too large (size=%u)\n", fmanfw, length); return; @@ -660,8 +660,19 @@ void ft_cpu_setup(void *blob, bd_t *bd) do_fixup_by_compat_u32(blob, "fsl,gianfar-ptp-timer", "timer-frequency", gd->bus_clk/2, 1); + /* + * clock-freq should change to clock-frequency and + * flexcan-v1.0 should change to p1010-flexcan respectively + * in the future. + */ do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0", - "clock_freq", gd->bus_clk, 1); + "clock_freq", gd->bus_clk/2, 1); + + do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0", + "clock-frequency", gd->bus_clk/2, 1); + + do_fixup_by_compat_u32(blob, "fsl,p1010-flexcan", + "clock-frequency", gd->bus_clk/2, 1); fdt_fixup_usb(blob); } @@ -677,6 +688,12 @@ void ft_cpu_setup(void *blob, bd_t *bd) #define CCSR_VIRT_TO_PHYS(x) \ (CONFIG_SYS_CCSRBAR_PHYS + ((x) - CONFIG_SYS_CCSRBAR)) +static void msg(const char *name, uint64_t uaddr, uint64_t daddr) +{ + printf("Warning: U-Boot configured %s at address %llx,\n" + "but the device tree has it at %llx\n", name, uaddr, daddr); +} + /* * Verify the device tree * @@ -692,33 +709,32 @@ void ft_cpu_setup(void *blob, bd_t *bd) */ int ft_verify_fdt(void *fdt) { - uint64_t ccsr = 0; + uint64_t addr = 0; int aliases; int off; /* First check the CCSR base address */ off = fdt_node_offset_by_prop_value(fdt, -1, "device_type", "soc", 4); if (off > 0) - ccsr = fdt_get_base_address(fdt, off); + addr = fdt_get_base_address(fdt, off); - if (!ccsr) { + if (!addr) { printf("Warning: could not determine base CCSR address in " "device tree\n"); /* No point in checking anything else */ return 0; } - if (ccsr != CONFIG_SYS_CCSRBAR_PHYS) { - printf("Warning: U-Boot configured CCSR at address %llx,\n" - "but the device tree has it at %llx\n", - (uint64_t) CONFIG_SYS_CCSRBAR_PHYS, ccsr); + if (addr != CONFIG_SYS_CCSRBAR_PHYS) { + msg("CCSR", CONFIG_SYS_CCSRBAR_PHYS, addr); /* No point in checking anything else */ return 0; } /* - * Get the 'aliases' node. If there isn't one, then there's nothing - * left to do. + * Check some nodes via aliases. We assume that U-Boot and the device + * tree enumerate the devices equally. E.g. the first serial port in + * U-Boot is the same as "serial0" in the device tree. */ aliases = fdt_path_offset(fdt, "/aliases"); if (aliases > 0) { @@ -735,5 +751,30 @@ int ft_verify_fdt(void *fdt) #endif } + /* + * The localbus node is typically a root node, even though the lbc + * controller is part of CCSR. If we were to put the lbc node under + * the SOC node, then the 'ranges' property in the lbc node would + * translate through the 'ranges' property of the parent SOC node, and + * we don't want that. Since it's a separate node, it's possible for + * the 'reg' property to be wrong, so check it here. For now, we + * only check for "fsl,elbc" nodes. + */ +#ifdef CONFIG_SYS_LBC_ADDR + off = fdt_node_offset_by_compatible(fdt, -1, "fsl,elbc"); + if (off > 0) { + const u32 *reg = fdt_getprop(fdt, off, "reg", NULL); + if (reg) { + uint64_t uaddr = CCSR_VIRT_TO_PHYS(CONFIG_SYS_LBC_ADDR); + + addr = fdt_translate_address(fdt, off, reg); + if (uaddr != addr) { + msg("the localbus", uaddr, addr); + return 0; + } + } + } +#endif + return 1; } diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c index 89ed5b4..4b52dad 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c @@ -495,7 +495,6 @@ void fsl_serdes_init(void) int cfg; serdes_corenet_t *srds_regs; int lane, bank, idx; - enum srds_prtcl lane_prtcl; int have_bank[SRDS_MAX_BANK] = {}; #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 u32 serdes8_devdisr = 0; @@ -507,6 +506,7 @@ void fsl_serdes_init(void) #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES_A001 int need_serdes_a001; /* TRUE == need work-around for SERDES A001 */ #endif +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 char buffer[HWCONFIG_BUFFER_SIZE]; char *buf = NULL; @@ -516,6 +516,7 @@ void fsl_serdes_init(void) */ if (getenv_f("hwconfig", buffer, sizeof(buffer)) > 0) buf = buffer; +#endif /* Is serdes enabled at all? */ if (!(in_be32(&gur->rcwsr[5]) & FSL_CORENET_RCWSR5_SRDS_EN)) @@ -617,7 +618,10 @@ void fsl_serdes_init(void) } } +#if defined(CONFIG_SYS_P4080_ERRATUM_SERDES8) || defined (CONFIG_SYS_P4080_ERRATUM_SERDES9) for (lane = 0; lane < SRDS_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl; + idx = serdes_get_lane_idx(lane); lane_prtcl = serdes_get_prtcl(cfg, lane); @@ -729,6 +733,7 @@ void fsl_serdes_init(void) #endif } +#endif #ifdef DEBUG puts("\n"); diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S index 6678ed4..c81e19c 100644 --- a/arch/powerpc/cpu/mpc85xx/release.S +++ b/arch/powerpc/cpu/mpc85xx/release.S @@ -68,6 +68,12 @@ __secondary_start_page: mtspr SPRN_HID1,r3 #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_CPU_A003999 + mfspr r3,977 + oris r3,r3,0x0100 + mtspr 977,r3 +#endif + /* Enable branch prediction */ lis r3,BUCSR_ENABLE@h ori r3,r3,BUCSR_ENABLE@l diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 5e0d78d..4d37d6e 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -253,6 +253,12 @@ l2_disabled: mtspr HID1,r0 #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_CPU_A003999 + mfspr r3,977 + oris r3,r3,0x0100 + mtspr 977,r3 +#endif + /* Enable Branch Prediction */ #if defined(CONFIG_BTB) lis r0,BUCSR_ENABLE@h @@ -319,6 +325,55 @@ l2_disabled: #endif /* CONFIG_MPC8569 */ /* + * Search for the TLB that covers the code we're executing, and shrink it + * so that it covers only this 4K page. That will ensure that any other + * TLB we create won't interfere with it. We assume that the TLB exists, + * which is why we don't check the Valid bit of MAS1. + * + * This is necessary, for example, when booting from the on-chip ROM, + * which (oddly) creates a single 4GB TLB that covers CCSR and DDR. + * If we don't shrink this TLB now, then we'll accidentally delete it + * in "purge_old_ccsr_tlb" below. + */ + bl nexti /* Find our address */ +nexti: mflr r1 /* R1 = our PC */ + li r2, 0 + mtspr MAS6, r2 /* Assume the current PID and AS are 0 */ + isync + msync + tlbsx 0, r1 /* This must succeed */ + + /* Set the size of the TLB to 4KB */ + mfspr r3, MAS1 + li r2, 0xF00 + andc r3, r3, r2 /* Clear the TSIZE bits */ + ori r3, r3, MAS1_TSIZE(BOOKE_PAGESZ_4K)@l + mtspr MAS1, r3 + + /* + * Set the base address of the TLB to our PC. We assume that + * virtual == physical. We also assume that MAS2_EPN == MAS3_RPN. + */ + lis r3, MAS2_EPN@h + ori r3, r3, MAS2_EPN@l /* R3 = MAS2_EPN */ + + and r1, r1, r3 /* Our PC, rounded down to the nearest page */ + + mfspr r2, MAS2 + andc r2, r2, r3 + or r2, r2, r1 + mtspr MAS2, r2 /* Set the EPN to our PC base address */ + + mfspr r2, MAS3 + andc r2, r2, r3 + or r2, r2, r1 + mtspr MAS3, r2 /* Set the RPN to our PC base address */ + + isync + msync + tlbwe + +/* * Relocate CCSR, if necessary. We relocate CCSR if (obviously) the default * location is not where we want it. This typically happens on a 36-bit * system, where we want to move CCSR to near the top of 36-bit address space. @@ -352,6 +407,8 @@ purge_old_ccsr_tlb: li r1, 0 mtspr MAS6, r1 /* Search the current address space and PID */ + isync + msync tlbsx 0, r8 mfspr r1, MAS1 andis. r2, r1, MAS1_VALID@h /* Check for the Valid bit */ @@ -359,6 +416,8 @@ purge_old_ccsr_tlb: rlwinm r1, r1, 0, 1, 31 /* Clear Valid bit */ mtspr MAS1, r1 + isync + msync tlbwe 1: @@ -387,7 +446,7 @@ create_ccsr_new_tlb: tlbwe /* - * Create a TLB for the old location of CCSR. Register R9 is reserved + * Create a TLB for the current location of CCSR. Register R9 is reserved * for the virtual address of this TLB (CONFIG_SYS_CCSRBAR + 0x1000). */ create_ccsr_old_tlb: @@ -407,6 +466,33 @@ create_ccsr_old_tlb: msync tlbwe + /* + * We have a TLB for what we think is the current (old) CCSR. Let's + * verify that, otherwise we won't be able to move it. + * CONFIG_SYS_CCSRBAR_DEFAULT is always a 32-bit number, so we only + * need to compare the lower 32 bits of CCSRBAR on CoreNet systems. + */ +verify_old_ccsr: + lis r0, CONFIG_SYS_CCSRBAR_DEFAULT@h + ori r0, r0, CONFIG_SYS_CCSRBAR_DEFAULT@l +#ifdef CONFIG_FSL_CORENET + lwz r1, 4(r9) /* CCSRBARL */ +#else + lwz r1, 0(r9) /* CCSRBAR, shifted right by 12 */ + slwi r1, r1, 12 +#endif + + cmpl 0, r0, r1 + + /* + * If the value we read from CCSRBARL is not what we expect, then + * enter an infinite loop. This will at least allow a debugger to + * halt execution and examine TLBs, etc. There's no point in going + * on. + */ +infinite_debug_loop: + bne infinite_debug_loop + #ifdef CONFIG_FSL_CORENET #define CCSR_LAWBARH0 (CONFIG_SYS_CCSRBAR + 0x1000) @@ -446,7 +532,7 @@ create_temp_law: */ read_old_ccsrbar: lwz r0, 0(r9) /* CCSRBARH */ - lwz r0, 4(r9) /* CCSRBARH */ + lwz r0, 4(r9) /* CCSRBARL */ isync /* diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c index 01a3561..929f6a6 100644 --- a/arch/powerpc/cpu/mpc85xx/tlb.c +++ b/arch/powerpc/cpu/mpc85xx/tlb.c @@ -172,7 +172,7 @@ void set_tlb(u8 tlb, u32 epn, u64 rpn, void disable_tlb(u8 esel) { - u32 _mas0, _mas1, _mas2, _mas3, _mas7; + u32 _mas0, _mas1, _mas2, _mas3; free_tlb_cam(esel); @@ -180,14 +180,13 @@ void disable_tlb(u8 esel) _mas1 = 0; _mas2 = 0; _mas3 = 0; - _mas7 = 0; mtspr(MAS0, _mas0); mtspr(MAS1, _mas1); mtspr(MAS2, _mas2); mtspr(MAS3, _mas3); #ifdef CONFIG_ENABLE_36BIT_PHYS - mtspr(MAS7, _mas7); + mtspr(MAS7, 0); #endif asm volatile("isync;msync;tlbwe;isync"); @@ -252,16 +251,20 @@ setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg) unsigned int tlb_size; unsigned int wimge = 0; unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE; - unsigned int max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf; + unsigned int max_cam; u64 size, memsize = (u64)memsize_in_meg << 20; #ifdef CONFIG_SYS_PPC_DDR_WIMGE wimge = CONFIG_SYS_PPC_DDR_WIMGE; #endif size = min(memsize, CONFIG_MAX_MEM_MAPPED); - - /* Convert (4^max) kB to (2^max) bytes */ - max_cam = max_cam * 2 + 10; + if ((mfspr(SPRN_MMUCFG) & MMUCFG_MAVN) == MMUCFG_MAVN_V1) { + /* Convert (4^max) kB to (2^max) bytes */ + max_cam = ((mfspr(SPRN_TLB1CFG) >> 16) & 0xf) * 2 + 10; + } else { + /* Convert (2^max) kB to (2^max) bytes */ + max_cam = __ilog2(mfspr(SPRN_TLB1PS)) + 10; + } for (i = 0; size && i < 8; i++) { int ram_tlb_index = find_free_tlbcam(); diff --git a/arch/powerpc/cpu/mpc86xx/cpu.c b/arch/powerpc/cpu/mpc86xx/cpu.c index ffcc8e6..d2c8c78 100644 --- a/arch/powerpc/cpu/mpc86xx/cpu.c +++ b/arch/powerpc/cpu/mpc86xx/cpu.c @@ -48,7 +48,6 @@ checkcpu(void) { sys_info_t sysinfo; uint pvr, svr; - uint ver; uint major, minor; char buf1[32], buf2[32]; volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; @@ -57,7 +56,6 @@ checkcpu(void) uint msscr0 = mfspr(MSSCR0); svr = get_svr(); - ver = SVR_SOC_VER(svr); major = SVR_MAJ(svr); minor = SVR_MIN(svr); @@ -77,7 +75,6 @@ checkcpu(void) puts("Core: "); pvr = get_pvr(); - ver = PVR_E600_VER(pvr); major = PVR_E600_MAJ(pvr); minor = PVR_E600_MIN(pvr); diff --git a/arch/powerpc/cpu/mpc8xx/video.c b/arch/powerpc/cpu/mpc8xx/video.c index 7725c67..1bbf4cc 100644 --- a/arch/powerpc/cpu/mpc8xx/video.c +++ b/arch/powerpc/cpu/mpc8xx/video.c @@ -125,6 +125,7 @@ DECLARE_GLOBAL_DATA_PTR; /************************************************************************/ #include <video_font.h> /* Get font data, width and height */ +#include <video_font_data.h> #ifdef CONFIG_VIDEO_LOGO #include <video_logo.h> /* Get logo data, width and height */ diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c index 15cd375..2067d53 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -672,7 +672,6 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, rcw_en = 1; ap_en = popts->ap_en; } else { - rcw_en = 0; ap_en = 0; } @@ -702,9 +701,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, | ((obc_cfg & 0x1) << 6) | ((ap_en & 0x1) << 5) | ((d_init & 0x1) << 4) -#ifdef CONFIG_FSL_DDR3 | ((rcw_en & 0x1) << 2) -#endif | ((md_en & 0x1) << 0) ); debug("FSLDDR: ddr_sdram_cfg_2 = 0x%08x\n", ddr->ddr_sdram_cfg_2); @@ -745,7 +742,7 @@ static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, #ifdef CONFIG_FSL_DDR3 if (unq_mrs_en) { /* unique mode registers are supported */ - for (i = 1; i < 4; i++) { + for (i = 1; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { if (popts->rtt_override) rtt_wr = popts->rtt_wr_override_value; else @@ -944,7 +941,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, debug("FSLDDR: ddr_sdram_mode = 0x%08x\n", ddr->ddr_sdram_mode); if (unq_mrs_en) { /* unique mode registers are supported */ - for (i = 1; i < 4; i++) { + for (i = 1; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { if (popts->rtt_override) rtt = popts->rtt_override_value; else diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c index ffb503a..d0a5466 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c @@ -135,6 +135,7 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd, switch (spd->module_type & DDR3_SPD_MODULETYPE_MASK) { case DDR3_SPD_MODULETYPE_RDIMM: case DDR3_SPD_MODULETYPE_MINI_RDIMM: + case DDR3_SPD_MODULETYPE_72B_SO_RDIMM: /* Registered/buffered DIMMs */ pdimm->registered_dimm = 1; for (i = 0; i < 16; i += 2) { @@ -148,6 +149,12 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd, case DDR3_SPD_MODULETYPE_SO_DIMM: case DDR3_SPD_MODULETYPE_MICRO_DIMM: case DDR3_SPD_MODULETYPE_MINI_UDIMM: + case DDR3_SPD_MODULETYPE_MINI_CDIMM: + case DDR3_SPD_MODULETYPE_72B_SO_UDIMM: + case DDR3_SPD_MODULETYPE_72B_SO_CDIMM: + case DDR3_SPD_MODULETYPE_LRDIMM: + case DDR3_SPD_MODULETYPE_16B_SO_DIMM: + case DDR3_SPD_MODULETYPE_32B_SO_DIMM: /* Unbuffered DIMMs */ if (spd->mod_section.unbuffered.addr_mapping & 0x1) pdimm->mirrored_dimm = 1; diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c index d7d66ef..5b72437 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c @@ -1354,7 +1354,6 @@ unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo) { unsigned long long ddrsize; const char *prompt = "FSL DDR>"; - unsigned int len; char buffer[CONFIG_SYS_CBSIZE]; char *argv[CONFIG_SYS_MAXARGS + 1]; /* NULL terminated */ int argc; @@ -1389,7 +1388,7 @@ unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo) * No need to worry for buffer overflow here in * this function; readline() maxes out at CFG_CBSIZE */ - len = readline_into_buffer(prompt, buffer); + readline_into_buffer(prompt, buffer); argc = parse_line(buffer, argv); if (argc == 0) continue; diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c index 4dc748b..00ec57b 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c @@ -483,7 +483,9 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, unsigned int i; char buffer[HWCONFIG_BUFFER_SIZE]; char *buf = NULL; +#if defined(CONFIG_FSL_DDR3) || defined(CONFIG_FSL_DDR2) const struct dynamic_odt *pdodt = odt_unknown; +#endif ulong ddr_freq; /* @@ -493,6 +495,7 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, if (getenv_f("hwconfig", buffer, sizeof(buffer)) > 0) buf = buffer; +#if defined(CONFIG_FSL_DDR3) || defined(CONFIG_FSL_DDR2) /* Chip select options. */ if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) { switch (pdimm[0].n_ranks) { @@ -546,6 +549,7 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, break; } } +#endif /* Pick chip-select local options. */ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c index 112c603..d07ae1b 100644 --- a/arch/powerpc/cpu/mpc8xxx/fdt.c +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c @@ -87,13 +87,12 @@ void ft_fixup_num_cores(void *blob) { #endif /* defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) */ #ifdef CONFIG_HAS_FSL_DR_USB -static void fdt_fixup_usb_mode_phy_type(void *blob, const char *mode, - const char *phy_type) +static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode, + const char *phy_type, int start_offset) { const char *compat = "fsl-usb2-dr"; const char *prop_mode = "dr_mode"; const char *prop_type = "phy_type"; - static int start_offset = -1; int node_offset; int err; @@ -102,7 +101,7 @@ static void fdt_fixup_usb_mode_phy_type(void *blob, const char *mode, if (node_offset < 0) { printf("WARNING: could not find compatible node %s: %s.\n", compat, fdt_strerror(node_offset)); - return; + return -1; } if (mode) { @@ -121,16 +120,18 @@ static void fdt_fixup_usb_mode_phy_type(void *blob, const char *mode, prop_type, compat, fdt_strerror(err)); } - start_offset = node_offset; + return node_offset; } void fdt_fixup_dr_usb(void *blob, bd_t *bd) { const char *modes[] = { "host", "peripheral", "otg" }; - const char *phys[] = { "ulpi", "umti" }; + const char *phys[] = { "ulpi", "utmi" }; const char *mode = NULL; const char *phy_type = NULL; char usb1_defined = 0; + int usb_mode_off = -1; + int usb_phy_off = -1; char str[5]; int i, j; @@ -153,11 +154,11 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) } } if (mode_idx >= 0) - fdt_fixup_usb_mode_phy_type(blob, - modes[mode_idx], NULL); + usb_mode_off = fdt_fixup_usb_mode_phy_type(blob, + modes[mode_idx], NULL, usb_mode_off); if (phy_idx >= 0) - fdt_fixup_usb_mode_phy_type(blob, - NULL, phys[phy_idx]); + usb_phy_off = fdt_fixup_usb_mode_phy_type(blob, + NULL, phys[phy_idx], usb_phy_off); if (!strcmp(str, "usb1")) usb1_defined = 1; if (mode_idx < 0 && phy_idx < 0) @@ -165,11 +166,12 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) } } if (!usb1_defined) { + int usb_off = -1; mode = getenv("usb_dr_mode"); phy_type = getenv("usb_phy_type"); if (!mode && !phy_type) return; - fdt_fixup_usb_mode_phy_type(blob, mode, phy_type); + fdt_fixup_usb_mode_phy_type(blob, mode, phy_type, usb_off); } } #endif /* CONFIG_HAS_FSL_DR_USB */ diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c index d78962f..587576b 100644 --- a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c +++ b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c @@ -107,7 +107,7 @@ void init_early_memctl_regs(void) void upmconfig(uint upm, uint *table, uint size) { fsl_lbc_t *lbc = LBC_BASE_ADDR; - int i, mdr, mad, old_mad = 0; + int i, mad, old_mad = 0; u32 mask = (~MxMR_OP_MSK & ~MxMR_MAD_MSK); u32 msel = BR_UPMx_TO_MSEL(upm); u32 *mxmr = &lbc->mamr + upm; @@ -138,7 +138,7 @@ void upmconfig(uint upm, uint *table, uint size) for (i = 0; i < size; i++) { out_be32(mxmr, (in_be32(mxmr) & mask) | MxMR_OP_WARR | i); out_be32(&lbc->mdr, table[i]); - mdr = in_be32(&lbc->mdr); + (void)in_be32(&lbc->mdr); *dummy = 0; do { mad = in_be32(mxmr) & MxMR_MAD_MSK; diff --git a/arch/powerpc/cpu/ppc4xx/40x_spd_sdram.c b/arch/powerpc/cpu/ppc4xx/40x_spd_sdram.c index a31b17e..48aa753 100644 --- a/arch/powerpc/cpu/ppc4xx/40x_spd_sdram.c +++ b/arch/powerpc/cpu/ppc4xx/40x_spd_sdram.c @@ -116,26 +116,25 @@ long int spd_sdram(int(read_spd)(uint addr)) { int tmp,row,col; int total_size,bank_size,bank_code; - int ecc_on; int mode; int bank_cnt; int sdram0_pmit=0x07c00000; + int sdram0_b0cr; + int sdram0_b1cr = 0; #ifndef CONFIG_405EP /* not on PPC405EP */ + int sdram0_b2cr = 0; + int sdram0_b3cr = 0; int sdram0_besr0 = -1; int sdram0_besr1 = -1; int sdram0_eccesr = -1; -#endif int sdram0_ecccfg; + int ecc_on; +#endif int sdram0_rtr=0; int sdram0_tr=0; - int sdram0_b0cr; - int sdram0_b1cr; - int sdram0_b2cr; - int sdram0_b3cr; - int sdram0_cfg=0; int t_rp; @@ -295,6 +294,7 @@ long int spd_sdram(int(read_spd)(uint addr)) if (bank_cnt > 4) /* we only have 4 banks to work with */ SPD_ERR("SDRAM - unsupported module rows for this width\n"); +#ifndef CONFIG_405EP /* not on PPC405EP */ /* now check for ECC ability of module. We only support ECC * on 32 bit wide devices with 8 bit ECC. */ @@ -305,6 +305,7 @@ long int spd_sdram(int(read_spd)(uint addr)) sdram0_ecccfg = 0; ecc_on = 0; } +#endif /*------------------------------------------------------------------ * calculate total size @@ -378,9 +379,6 @@ long int spd_sdram(int(read_spd)(uint addr)) * using the calculated values, compute the bank * config register values. * -------------------------------------------------------------------*/ - sdram0_b1cr = 0; - sdram0_b2cr = 0; - sdram0_b3cr = 0; /* compute the size of each bank */ bank_size = total_size / bank_cnt; @@ -444,8 +442,10 @@ long int spd_sdram(int(read_spd)(uint addr)) /* SDRAM have a power on delay, 500 micro should do */ udelay(500); sdram0_cfg = SDRAM0_CFG_DCE | SDRAM0_CFG_BRPF(1) | SDRAM0_CFG_ECCDD | SDRAM0_CFG_EMDULR; +#ifndef CONFIG_405EP /* not on PPC405EP */ if (ecc_on) sdram0_cfg |= SDRAM0_CFG_MEMCHK; +#endif mtsdram(SDRAM0_CFG, sdram0_cfg); return (total_size); diff --git a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c index e05daf2..8a20a2b 100644 --- a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c +++ b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c @@ -380,8 +380,6 @@ static void program_cfg0(unsigned long *dimm_populated, unsigned char ecc; unsigned char attributes; unsigned long data_width; - unsigned long dimm_32bit; - unsigned long dimm_64bit; /* * get Memory Controller Options 0 data @@ -423,10 +421,8 @@ static void program_cfg0(unsigned long *dimm_populated, (unsigned long)spd_read(iic0_dimm_addr[dimm_num],6) + (((unsigned long)spd_read(iic0_dimm_addr[dimm_num],7)) << 8); if (data_width == 64 || data_width == 72) { - dimm_64bit = TRUE; cfg0 |= SDRAM_CFG0_DMWD_64; } else if (data_width == 32 || data_width == 40) { - dimm_32bit = TRUE; cfg0 |= SDRAM_CFG0_DMWD_32; } else { printf("WARNING: DIMM with datawidth of %lu bits.\n", diff --git a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c index 4a2f337..85217ea 100644 --- a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c +++ b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c @@ -445,9 +445,6 @@ static unsigned char spd_read(uchar chip, uint addr) phys_size_t initdram(int board_type) { unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS; - unsigned char spd0[MAX_SPD_BYTES]; - unsigned char spd1[MAX_SPD_BYTES]; - unsigned char *dimm_spd[MAXDIMMS]; unsigned long dimm_populated[MAXDIMMS] = {SDRAM_NONE, SDRAM_NONE}; unsigned long num_dimm_banks; /* on board dimm banks */ unsigned long val; @@ -458,12 +455,6 @@ phys_size_t initdram(int board_type) num_dimm_banks = sizeof(iic0_dimm_addr); /*------------------------------------------------------------------ - * Set up an array of SPD matrixes. - *-----------------------------------------------------------------*/ - dimm_spd[0] = spd0; - dimm_spd[1] = spd1; - - /*------------------------------------------------------------------ * Reset the DDR-SDRAM controller. *-----------------------------------------------------------------*/ mtsdr(SDR0_SRST, SDR0_SRST0_DMC); @@ -1000,7 +991,6 @@ static void program_copt1(unsigned long *dimm_populated, unsigned long attribute = 0; unsigned long buf0, buf1; /* TODO: code to be changed for IOP1.6 to support 4 DIMMs */ unsigned long bankcount; - unsigned long ddrtype; unsigned long val; #ifdef CONFIG_DDR_ECC @@ -1045,8 +1035,6 @@ static void program_copt1(unsigned long *dimm_populated, else /* bank count = 8 */ mcopt1 |= SDRAM_MCOPT1_8_BANKS; - /* test DDR type */ - ddrtype = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 2); /* test for buffered/unbuffered, registered, differential clocks */ registered = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 20); attribute = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 21); @@ -1500,7 +1488,6 @@ static void program_mode(unsigned long *dimm_populated, else sdram_ddr1 = FALSE; - /* t_wr_ns = max(t_wr_ns, (unsigned long)dimm_spd[dimm_num][36] >> 2); */ /* not used in this loop. */ cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18); debug("cas_bit[SPD byte 18]=%02lx\n", cas_bit); @@ -2490,12 +2477,6 @@ static void DQS_calibration_process(void) unsigned long val; long rffd_average; long max_start; - long min_end; - unsigned long begin_rqfd[MAXRANKS]; - unsigned long begin_rffd[MAXRANKS]; - unsigned long end_rqfd[MAXRANKS]; - unsigned long end_rffd[MAXRANKS]; - char window_found; unsigned long dlycal; unsigned long dly_val; unsigned long max_pass_length; @@ -2506,6 +2487,7 @@ static void DQS_calibration_process(void) unsigned char fail_found; unsigned char pass_found; #if !defined(CONFIG_DDR_RQDC_FIXED) + int window_found; u32 rqdc_reg; u32 rqfd; u32 rqfd_start; @@ -2559,16 +2541,6 @@ calibration_loop: #endif /* CONFIG_DDR_RQDC_FIXED */ max_start = 0; - min_end = 0; - begin_rqfd[0] = 0; - begin_rffd[0] = 0; - begin_rqfd[1] = 0; - begin_rffd[1] = 0; - end_rqfd[0] = 0; - end_rffd[0] = 0; - end_rqfd[1] = 0; - end_rffd[1] = 0; - window_found = FALSE; max_pass_length = 0; max_start = 0; @@ -2576,7 +2548,6 @@ calibration_loop: current_pass_length = 0; current_fail_length = 0; current_start = 0; - window_found = FALSE; fail_found = FALSE; pass_found = FALSE; @@ -2621,7 +2592,6 @@ calibration_loop: if (fail_found == FALSE) { fail_found = TRUE; } else if (pass_found == TRUE) { - window_found = TRUE; break; } } diff --git a/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c b/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c index 4b8e65a..3c87bfb 100644 --- a/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c +++ b/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c @@ -154,18 +154,20 @@ u32 ddr_rdss_opt(ulong) __attribute__((weak, alias("__ddr_rdss_opt"))); static u32 *get_membase(int bxcr_num) { - ulong bxcf; u32 *membase; #if defined(SDRAM_R0BAS) /* BAS from Memory Queue rank reg. */ membase = (u32 *)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num))); - bxcf = 0; /* just to satisfy the compiler */ #else - /* BAS from SDRAM_MBxCF mem rank reg. */ - mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf); - membase = (u32 *)((bxcf & 0xfff80000) << 3); + { + ulong bxcf; + + /* BAS from SDRAM_MBxCF mem rank reg. */ + mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf); + membase = (u32 *)((bxcf & 0xfff80000) << 3); + } #endif return membase; @@ -719,7 +721,9 @@ static u32 program_DQS_calibration_methodB(struct ddrautocal *ddrcal) static u32 DQS_calibration_methodB(struct ddrautocal *cal) { ulong rfdc_reg; +#ifndef CONFIG_DDR_RFDC_FIXED ulong rffd; +#endif ulong rqdc_reg; ulong rqfd; @@ -837,7 +841,6 @@ static u32 DQS_calibration_methodB(struct ddrautocal *cal) mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average)); #endif /* CONFIG_DDR_RFDC_FIXED */ - rffd = rffd_average; in_window = 0; curr_win_min = curr_win_max = 0; diff --git a/arch/powerpc/cpu/ppc4xx/4xx_pcie.c b/arch/powerpc/cpu/ppc4xx/4xx_pcie.c index a87e93b..43b972f 100644 --- a/arch/powerpc/cpu/ppc4xx/4xx_pcie.c +++ b/arch/powerpc/cpu/ppc4xx/4xx_pcie.c @@ -227,7 +227,6 @@ static void pcie_dmer_enable(void) static int pcie_read_config(struct pci_controller *hose, unsigned int devfn, int offset, int len, u32 *val) { - u8 *address; *val = 0; if (validate_endpoint(hose)) @@ -255,7 +254,7 @@ static int pcie_read_config(struct pci_controller *hose, unsigned int devfn, ((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1))) return 0; - address = pcie_get_base(hose, devfn); + pcie_get_base(hose, devfn); offset += devfn << 4; /* @@ -287,8 +286,6 @@ static int pcie_read_config(struct pci_controller *hose, unsigned int devfn, static int pcie_write_config(struct pci_controller *hose, unsigned int devfn, int offset, int len, u32 val) { - u8 *address; - if (validate_endpoint(hose)) return 0; /* No upstream config access */ @@ -307,7 +304,7 @@ static int pcie_write_config(struct pci_controller *hose, unsigned int devfn, ((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1))) return 0; - address = pcie_get_base(hose, devfn); + pcie_get_base(hose, devfn); offset += devfn << 4; /* @@ -1063,7 +1060,6 @@ int ppc4xx_init_pcie_endport(int port) void ppc4xx_setup_pcie_rootpoint(struct pci_controller *hose, int port) { volatile void *mbase = NULL; - volatile void *rmbase = NULL; pci_set_ops(hose, pcie_read_config_byte, @@ -1076,18 +1072,15 @@ void ppc4xx_setup_pcie_rootpoint(struct pci_controller *hose, int port) switch (port) { case 0: mbase = (u32 *)CONFIG_SYS_PCIE0_XCFGBASE; - rmbase = (u32 *)CONFIG_SYS_PCIE0_CFGBASE; hose->cfg_data = (u8 *)CONFIG_SYS_PCIE0_CFGBASE; break; case 1: mbase = (u32 *)CONFIG_SYS_PCIE1_XCFGBASE; - rmbase = (u32 *)CONFIG_SYS_PCIE1_CFGBASE; hose->cfg_data = (u8 *)CONFIG_SYS_PCIE1_CFGBASE; break; #if CONFIG_SYS_PCIE_NR_PORTS > 2 case 2: mbase = (u32 *)CONFIG_SYS_PCIE2_XCFGBASE; - rmbase = (u32 *)CONFIG_SYS_PCIE2_CFGBASE; hose->cfg_data = (u8 *)CONFIG_SYS_PCIE2_CFGBASE; break; #endif diff --git a/arch/powerpc/cpu/ppc4xx/Makefile b/arch/powerpc/cpu/ppc4xx/Makefile index d97ca20..3d62255 100644 --- a/arch/powerpc/cpu/ppc4xx/Makefile +++ b/arch/powerpc/cpu/ppc4xx/Makefile @@ -61,7 +61,6 @@ COBJS += tlb.o COBJS += traps.o COBJS += usb.o COBJS += usb_ohci.o -COBJS += usbdev.o COBJS-$(CONFIG_XILINX_440) += xilinx_irq.o ifndef CONFIG_XILINX_440 COBJS += 4xx_uart.o diff --git a/arch/powerpc/cpu/ppc4xx/cmd_ecctest.c b/arch/powerpc/cpu/ppc4xx/cmd_ecctest.c index 542ab69..231f69e 100644 --- a/arch/powerpc/cpu/ppc4xx/cmd_ecctest.c +++ b/arch/powerpc/cpu/ppc4xx/cmd_ecctest.c @@ -113,8 +113,6 @@ static force_inline void set_mcopt1_mchk(u32 bits) */ static void inject_ecc_error(void *ptr, int par) { - u32 val; - /* * Taken from PPC460EX/EXr/GT users manual (Rev 1.21) * 22.2.17.13 ECC Diagnostics @@ -124,7 +122,7 @@ static void inject_ecc_error(void *ptr, int par) */ out_be32(ptr, 0x00000000); - val = in_be32(ptr); + in_be32(ptr); /* 6. Set memory controller to no error checking */ set_mcopt1_mchk(SDRAM_MCOPT1_MCHK_NON); @@ -136,7 +134,7 @@ static void inject_ecc_error(void *ptr, int par) out_be32(ptr, in_be32(ptr) ^ 0x00000003); /* 8. Wait for SDRAM idle */ - val = in_be32(ptr); + in_be32(ptr); set_mcopt1_mchk(SDRAM_MCOPT1_MCHK_CHK_REP); /* Wait for SDRAM idle */ @@ -151,7 +149,6 @@ static void rewrite_ecc_parity(void *ptr, int par) u32 end_address; u32 address_increment; u32 mcopt1; - u32 val; /* * Fill ECC parity byte again. Otherwise further accesses to @@ -159,7 +156,7 @@ static void rewrite_ecc_parity(void *ptr, int par) */ /* Wait for SDRAM idle */ - val = in_be32(0x00000000); + in_be32(0x00000000); set_mcopt1_mchk(SDRAM_MCOPT1_MCHK_GEN); /* ECC bit set method for non-cached memory */ diff --git a/arch/powerpc/cpu/ppc4xx/iop480_uart.c b/arch/powerpc/cpu/ppc4xx/iop480_uart.c index 0e3423f..027ca30 100644 --- a/arch/powerpc/cpu/ppc4xx/iop480_uart.c +++ b/arch/powerpc/cpu/ppc4xx/iop480_uart.c @@ -134,7 +134,6 @@ DECLARE_GLOBAL_DATA_PTR; int serial_init (void) { - volatile char val; unsigned short br_reg; br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1); @@ -149,7 +148,7 @@ int serial_init (void) out_8((u8 *)SPU_BASE + spu_RxCmd, 0xb0); /* Enable Rx */ out_8((u8 *)SPU_BASE + spu_TxCmd, 0x9c); /* Enable Tx */ out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */ - val = in_8((u8 *)SPU_BASE + spu_RxBuff); /* Dummy read, to clear receiver */ + in_8((u8 *)SPU_BASE + spu_RxBuff); /* Dummy read, to clear receiver */ return (0); } diff --git a/arch/powerpc/cpu/ppc4xx/usb.c b/arch/powerpc/cpu/ppc4xx/usb.c index 592efe7..8c71f75 100644 --- a/arch/powerpc/cpu/ppc4xx/usb.c +++ b/arch/powerpc/cpu/ppc4xx/usb.c @@ -30,8 +30,6 @@ DECLARE_GLOBAL_DATA_PTR; #endif -#include "usbdev.h" - int usb_cpu_init(void) { #ifdef CONFIG_4xx_DCACHE @@ -39,9 +37,6 @@ int usb_cpu_init(void) change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, TLB_WORD2_I_ENABLE); #endif -#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) - usb_dev_init(); -#endif return 0; } diff --git a/arch/powerpc/cpu/ppc4xx/usb_ohci.c b/arch/powerpc/cpu/ppc4xx/usb_ohci.c index fe091e3..4fb7031 100644 --- a/arch/powerpc/cpu/ppc4xx/usb_ohci.c +++ b/arch/powerpc/cpu/ppc4xx/usb_ohci.c @@ -44,8 +44,6 @@ #include <usb.h> #include "usb_ohci.h" -#include "usbdev.h" - #define OHCI_USE_NPS /* force NoPowerSwitching mode */ #undef OHCI_VERBOSE_DEBUG /* not always helpful */ #undef DEBUG @@ -753,10 +751,9 @@ static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buf static void dl_transfer_length(td_t * td) { - __u32 tdINFO, tdBE, tdCBP; + __u32 tdBE, tdCBP; urb_priv_t *lurb_priv = &urb_priv; - tdINFO = ohci_cpu_to_le32 (td->hwINFO); tdBE = ohci_cpu_to_le32 (td->hwBE); tdCBP = ohci_cpu_to_le32 (td->hwCBP); @@ -1624,11 +1621,6 @@ int usb_lowlevel_init(void) ohci_inited = 1; urb_finished = 1; -#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) - /* init the device driver */ - usb_dev_init(); -#endif - return 0; } diff --git a/arch/powerpc/cpu/ppc4xx/usbdev.c b/arch/powerpc/cpu/ppc4xx/usbdev.c deleted file mode 100644 index fe398af..0000000 --- a/arch/powerpc/cpu/ppc4xx/usbdev.c +++ /dev/null @@ -1,230 +0,0 @@ -/*USB 1.1,2.0 device*/ - -#include <common.h> -#include <asm/processor.h> - -#if (defined(CONFIG_440EP) || defined(CONFIG_440EPX)) && defined(CONFIG_CMD_USB) - -#include <usb.h> -#include <asm/ppc4xx-uic.h> -#include "usbdev.h" - -#define USB_DT_DEVICE 0x01 -#define USB_DT_CONFIG 0x02 -#define USB_DT_STRING 0x03 -#define USB_DT_INTERFACE 0x04 -#define USB_DT_ENDPOINT 0x05 - -int set_value = -1; - -void process_endpoints(unsigned short usb2d0_intrin) -{ - /*will hold the packet received */ - struct usb_device_descriptor usb_device_packet; - struct usb_configuration_descriptor usb_config_packet; - struct usb_string_descriptor usb_string_packet; - struct devrequest setup_packet; - unsigned int *setup_packet_pt; - unsigned char *packet_pt = NULL; - int temp, temp1; - - int i; - - /*printf("{USB device} - endpoint 0x%X \n", usb2d0_intrin); */ - - /*set usb address, seems to not work unless it is done in the next - interrupt, so that is why it is done this way */ - if (set_value != -1) - *(unsigned char *)USB2D0_FADDR_8 = (unsigned char)set_value; - - /*endpoint 1 */ - if (usb2d0_intrin & 0x01) { - setup_packet_pt = (unsigned int *)&setup_packet; - - /*copy packet */ - setup_packet_pt[0] = *(unsigned int *)USB2D0_FIFO_0; - setup_packet_pt[1] = *(unsigned int *)USB2D0_FIFO_0; - temp = *(unsigned int *)USB2D0_FIFO_0; - temp1 = *(unsigned int *)USB2D0_FIFO_0; - - /*do some swapping */ - setup_packet.value = swap_16(setup_packet.value); - setup_packet.index = swap_16(setup_packet.index); - setup_packet.length = swap_16(setup_packet.length); - - /*clear rx packet */ - *(unsigned short *)USB2D0_INCSR0_8 = 0x48; - - /*printf("0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X\n", setup_packet.requesttype, - setup_packet.request, setup_packet.value, - setup_packet.index, setup_packet.length, temp, temp1 ); */ - - switch (setup_packet.request) { - case USB_REQ_GET_DESCRIPTOR: - - switch (setup_packet.value >> 8) { - case USB_DT_DEVICE: - /*create packet */ - usb_device_packet.bLength = 18; - usb_device_packet.bDescriptorType = - USB_DT_DEVICE; -#ifdef USB_2_0_DEVICE - usb_device_packet.bcdUSB = swap_16(0x200); -#else - usb_device_packet.bcdUSB = swap_16(0x110); -#endif - usb_device_packet.bDeviceClass = 0xff; - usb_device_packet.bDeviceSubClass = 0; - usb_device_packet.bDeviceProtocol = 0; - usb_device_packet.bMaxPacketSize0 = 32; - usb_device_packet.idVendor = swap_16(1); - usb_device_packet.idProduct = swap_16(2); - usb_device_packet.bcdDevice = swap_16(0x300); - usb_device_packet.iManufacturer = 1; - usb_device_packet.iProduct = 1; - usb_device_packet.iSerialNumber = 1; - usb_device_packet.bNumConfigurations = 1; - - /*put packet in fifo */ - packet_pt = (unsigned char *)&usb_device_packet; - break; - - case USB_DT_CONFIG: - /*create packet */ - usb_config_packet.bLength = 9; - usb_config_packet.bDescriptorType = - USB_DT_CONFIG; - usb_config_packet.wTotalLength = swap_16(25); - usb_config_packet.bNumInterfaces = 1; - usb_config_packet.bConfigurationValue = 1; - usb_config_packet.iConfiguration = 0; - usb_config_packet.bmAttributes = 0x40; - usb_config_packet.bMaxPower = 0; - - /*put packet in fifo */ - packet_pt = (unsigned char *)&usb_config_packet; - break; - - case USB_DT_STRING: - /*create packet */ - usb_string_packet.bLength = 2; - usb_string_packet.bDescriptorType = - USB_DT_STRING; - usb_string_packet.wData[0] = 0x0094; - - /*put packet in fifo */ - packet_pt = (unsigned char *)&usb_string_packet; - break; - } - - /*put packet in fifo */ - for (i = 0; i < (setup_packet.length); i++) { - *(unsigned char *)USB2D0_FIFO_0 = packet_pt[i]; - } - - /*give tx command */ - *(unsigned short *)USB2D0_INCSR0_8 = 0x0a; - - break; - - case USB_REQ_SET_ADDRESS: - - /*copy usb address */ - set_value = setup_packet.value; - - break; - } - - } -} - -void process_other(unsigned char usb2d0_intrusb) -{ - - /*check for sof */ - if (usb2d0_intrusb & 0x08) { - /*printf("{USB device} - sof detected\n"); */ - } - - /*check for reset */ - if (usb2d0_intrusb & 0x04) { - /*printf("{USB device} - reset detected\n"); */ - - /*copy usb address of zero, need to do this when usb reset */ - set_value = 0; - } - - if (usb2d0_intrusb & 0x02) { - /*printf("{USB device} - resume detected\n"); */ - } - - if (usb2d0_intrusb & 0x01) { - /*printf("{USB device} - suspend detected\n"); */ - } -} - -int usbInt(void) -{ - /*Must read these 2 registers and use values to clear interrupts. If you - do not read them then the interrupt will not be cleared. If you do not - use the variable the optimizer will not do a read. */ - volatile unsigned short usb2d0_intrin = - *(unsigned short *)USB2D0_INTRIN_16; - volatile unsigned char usb2d0_intrusb = - *(unsigned char *)USB2D0_INTRUSB_8; - - /*check if there was an endpoint interrupt */ - if (usb2d0_intrin != 0) { - process_endpoints(usb2d0_intrin); - } - - /*check for other interrupts */ - if (usb2d0_intrusb != 0) { - process_other(usb2d0_intrusb); - } - - return 0; -} - -#if defined(CONFIG_440EPX) -void usb_dev_init() -{ - printf("USB 2.0 Device init\n"); - - /*usb dev init */ - *(unsigned char *)USB2D0_POWER_8 = 0xa1; /* 2.0 */ - - /*enable interrupts */ - *(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f; - - irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt, - NULL); -} -#else -void usb_dev_init() -{ -#ifdef USB_2_0_DEVICE - printf("USB 2.0 Device init\n"); - /*select 2.0 device */ - mtsdr(SDR0_USB0, 0x0); /* 2.0 */ - - /*usb dev init */ - *(unsigned char *)USB2D0_POWER_8 = 0xa1; /* 2.0 */ -#else - printf("USB 1.1 Device init\n"); - /*select 1.1 device */ - mtsdr(SDR0_USB0, 0x2); /* 1.1 */ - - /*usb dev init */ - *(unsigned char *)USB2D0_POWER_8 = 0xc0; /* 1.1 */ -#endif - - /*enable interrupts */ - *(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f; - - irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt, - NULL); -} -#endif - -#endif /* CONFIG_440EP || CONFIG_440EPX */ diff --git a/arch/powerpc/cpu/ppc4xx/usbdev.h b/arch/powerpc/cpu/ppc4xx/usbdev.h deleted file mode 100644 index ef6a2da..0000000 --- a/arch/powerpc/cpu/ppc4xx/usbdev.h +++ /dev/null @@ -1,31 +0,0 @@ -#include <config.h> - -/*Common Registers*/ -#define USB2D0_INTRIN_16 (CONFIG_SYS_USB_DEVICE | 0x100) -#define USB2D0_POWER_8 (CONFIG_SYS_USB_DEVICE | 0x102) -#define USB2D0_FADDR_8 (CONFIG_SYS_USB_DEVICE | 0x103) -#define USB2D0_INTRINE_16 (CONFIG_SYS_USB_DEVICE | 0x104) -#define USB2D0_INTROUT_16 (CONFIG_SYS_USB_DEVICE | 0x106) -#define USB2D0_INTRUSBE_8 (CONFIG_SYS_USB_DEVICE | 0x108) -#define USB2D0_INTRUSB_8 (CONFIG_SYS_USB_DEVICE | 0x109) -#define USB2D0_INTROUTE_16 (CONFIG_SYS_USB_DEVICE | 0x10a) -#define USB2D0_TSTMODE_8 (CONFIG_SYS_USB_DEVICE | 0x10c) -#define USB2D0_INDEX_8 (CONFIG_SYS_USB_DEVICE | 0x10d) -#define USB2D0_FRAME_16 (CONFIG_SYS_USB_DEVICE | 0x10e) - -/*Indexed Registers*/ -#define USB2D0_INCSR0_8 (CONFIG_SYS_USB_DEVICE | 0x110) -#define USB2D0_INCSR_16 (CONFIG_SYS_USB_DEVICE | 0x110) -#define USB2D0_INMAXP_16 (CONFIG_SYS_USB_DEVICE | 0x112) -#define USB2D0_OUTCSR_16 (CONFIG_SYS_USB_DEVICE | 0x114) -#define USB2D0_OUTMAXP_16 (CONFIG_SYS_USB_DEVICE | 0x116) -#define USB2D0_OUTCOUNT0_8 (CONFIG_SYS_USB_DEVICE | 0x11a) -#define USB2D0_OUTCOUNT_16 (CONFIG_SYS_USB_DEVICE | 0x11a) - -/*FIFOs*/ -#define USB2D0_FIFO_0 (CONFIG_SYS_USB_DEVICE | 0x120) -#define USB2D0_FIFO_1 (CONFIG_SYS_USB_DEVICE | 0x124) -#define USB2D0_FIFO_2 (CONFIG_SYS_USB_DEVICE | 0x128) -#define USB2D0_FIFO_3 (CONFIG_SYS_USB_DEVICE | 0x12c) - -void usb_dev_init(void); diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index c3d6ba9..8654625 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -64,6 +64,7 @@ #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_NMG_DDR120 #define CONFIG_SYS_FSL_ERRATUM_NMG_LBC103 +#define CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129 #elif defined(CONFIG_MPC8555) #define CONFIG_MAX_CPUS 1 @@ -149,6 +150,7 @@ #define CONFIG_SYS_FSL_NUM_LAWS 12 #define CONFIG_TSECV2 #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_FSL_SATA_V2 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 @@ -236,6 +238,7 @@ #define CONFIG_SYS_FSL_NUM_LAWS 12 #define CONFIG_TSECV2 #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_FSL_SATA_V2 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 @@ -312,12 +315,15 @@ #define CONFIG_SYS_FSL_USB2_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999 +#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 #elif defined(CONFIG_PPC_P2041) #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 #define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_FSL_SATA_V2 #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_NUM_FM1_DTSEC 5 #define CONFIG_SYS_NUM_FM1_10GEC 1 @@ -330,12 +336,15 @@ #define CONFIG_SYS_FSL_USB2_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999 +#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 #elif defined(CONFIG_PPC_P3041) #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 #define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_FSL_SATA_V2 #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_NUM_FM1_DTSEC 5 #define CONFIG_SYS_NUM_FM1_10GEC 1 @@ -348,6 +357,8 @@ #define CONFIG_SYS_FSL_USB2_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999 +#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 #elif defined(CONFIG_PPC_P3060) #define CONFIG_MAX_CPUS 8 @@ -363,6 +374,7 @@ #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003 +#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999 #elif defined(CONFIG_PPC_P4040) #define CONFIG_MAX_CPUS 4 @@ -373,6 +385,8 @@ #define CONFIG_SYS_FSL_TBCLK_DIV 16 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,p4080-pcie" #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 +#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999 +#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 #elif defined(CONFIG_PPC_P4080) #define CONFIG_MAX_CPUS 8 @@ -401,6 +415,8 @@ #define CONFIG_SYS_P4080_ERRATUM_SERDES9 #define CONFIG_SYS_P4080_ERRATUM_SERDES_A001 #define CONFIG_SYS_P4080_ERRATUM_SERDES_A005 +#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999 +#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 /* P5010 is single core version of P5020 */ #elif defined(CONFIG_PPC_P5010) @@ -408,6 +424,7 @@ #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 #define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_FSL_SATA_V2 #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_NUM_FM1_DTSEC 5 #define CONFIG_SYS_NUM_FM1_10GEC 1 @@ -420,12 +437,14 @@ #define CONFIG_SYS_FSL_USB2_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 #elif defined(CONFIG_PPC_P5020) #define CONFIG_MAX_CPUS 2 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 #define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_FSL_SATA_V2 #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_NUM_FM1_DTSEC 5 #define CONFIG_SYS_NUM_FM1_10GEC 1 @@ -438,6 +457,7 @@ #define CONFIG_SYS_FSL_USB2_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 #else #error Processor type not defined for this platform diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 99fe97d..9b08cb8 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -2420,6 +2420,7 @@ struct ccsr_rman { #define CONFIG_SYS_MPC85xx_L2_OFFSET 0x20000 #define CONFIG_SYS_MPC85xx_DMA_OFFSET 0x21000 #define CONFIG_SYS_MPC85xx_USB_OFFSET 0x22000 +#define CONFIG_SYS_MPC85xx_USB2_OFFSET 0x23000 #ifdef CONFIG_TSECV2 #define CONFIG_SYS_TSEC1_OFFSET 0xB0000 #else diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index ef5076b..209103e 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -392,17 +392,17 @@ extern void print_bats(void); */ #define MAS0_TLBSEL_MSK 0x30000000 -#define MAS0_TLBSEL(x) ((x << 28) & MAS0_TLBSEL_MSK) +#define MAS0_TLBSEL(x) (((x) << 28) & MAS0_TLBSEL_MSK) #define MAS0_ESEL_MSK 0x0FFF0000 -#define MAS0_ESEL(x) ((x << 16) & MAS0_ESEL_MSK) +#define MAS0_ESEL(x) (((x) << 16) & MAS0_ESEL_MSK) #define MAS0_NV(x) ((x) & 0x00000FFF) #define MAS1_VALID 0x80000000 #define MAS1_IPROT 0x40000000 -#define MAS1_TID(x) ((x << 16) & 0x3FFF0000) +#define MAS1_TID(x) (((x) << 16) & 0x3FFF0000) #define MAS1_TS 0x00001000 -#define MAS1_TSIZE(x) ((x << 8) & 0x00000F00) -#define TSIZE_TO_BYTES(x) ((phys_addr_t)(1UL << ((tsize * 2) + 10))) +#define MAS1_TSIZE(x) (((x) << 8) & 0x00000F00) +#define TSIZE_TO_BYTES(x) (1ULL << (((x) * 2) + 10)) #define MAS2_EPN 0xFFFFF000 #define MAS2_X0 0x00000040 diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 1b96b84..4e32639 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -513,7 +513,13 @@ #define SPRN_TLB0CFG 0x2B0 /* TLB 0 Config Register */ #define SPRN_TLB1CFG 0x2B1 /* TLB 1 Config Register */ +#define SPRN_TLB0PS 0x158 /* TLB 0 Page Size Register */ +#define SPRN_TLB1PS 0x159 /* TLB 1 Page Size Register */ #define SPRN_MMUCSR0 0x3f4 /* MMU control and status register 0 */ +#define SPRN_MMUCFG 0x3F7 /* MMU Configuration Register */ +#define MMUCFG_MAVN 0x00000003 /* MMU Architecture Version Number */ +#define MMUCFG_MAVN_V1 0x00000000 /* v1.0 */ +#define MMUCFG_MAVN_V2 0x00000001 /* v2.0 */ #define SPRN_MAS0 0x270 /* MMU Assist Register 0 */ #define SPRN_MAS1 0x271 /* MMU Assist Register 1 */ #define SPRN_MAS2 0x272 /* MMU Assist Register 2 */ |