diff options
Diffstat (limited to 'arch/powerpc/cpu')
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/cmd_errata.c | 4 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/ddr-gen3.c | 107 |
2 files changed, 110 insertions, 1 deletions
diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index 3f139c7..e94975a 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -77,6 +77,10 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #ifdef CONFIG_SYS_FSL_ERRATUM_DDR_115 puts("Work-around for Erratum DDR115 enabled\n"); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 + puts("Work-around for Erratum DDR111 enabled\n"); + puts("Work-around for Erratum DDR134 enabled\n"); +#endif return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c index 35997f2..73b320b 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c @@ -21,6 +21,10 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int i; volatile ccsr_ddr_t *ddr; u32 temp_sdram_cfg; +#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 + volatile ccsr_local_ecm_t *ecm = (void *)CONFIG_SYS_MPC85xx_ECM_ADDR; + u32 total_gb_size_per_controller; +#endif switch (ctrl_num) { case 0: @@ -185,6 +189,26 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, setbits_be32(&ddr->debug[0], 1); } #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 + /* + * This is the combined workaround for DDR111 and DDR134 + * following the published errata for MPC8572 + */ + + /* 1. Set EEBACR[3] */ + setbits_be32(&ecm->eebacr, 0x10000000); + debug("Setting EEBACR[3] to 0x%08x\n", in_be32(&ecm->eebacr)); + + /* 2. Set DINIT in SDRAM_CFG_2*/ + setbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_D_INIT); + debug("Setting sdram_cfg_2[D_INIT] to 0x%08x\n", + in_be32(&ddr->sdram_cfg_2)); + + /* 3. Set DEBUG_3[21] */ + setbits_be32(&ddr->debug[2], 0x400); + debug("Setting DEBUG_3[21] to 0x%08x\n", in_be32(&ddr->debug[2])); + +#endif /* part 1 of the workaound */ /* * 500 painful micro-seconds must elapse between @@ -201,7 +225,88 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, asm volatile("sync;isync"); /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */ - while (in_be32(&ddr->sdram_cfg_2) & 0x10) { + while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) udelay(10000); /* throttle polling rate */ + +#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 + /* continue this workaround */ + + /* 4. Clear DEBUG3[21] */ + clrbits_be32(&ddr->debug[2], 0x400); + debug("Clearing D3[21] to 0x%08x\n", in_be32(&ddr->debug[2])); + + /* DDR134 workaround starts */ + /* A: Clear sdram_cfg_2[odt_cfg] */ + clrbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_ODT_CFG_MASK); + debug("Clearing SDRAM_CFG2[ODT_CFG] to 0x%08x\n", + in_be32(&ddr->sdram_cfg_2)); + + /* B: Set DEBUG1[15] */ + setbits_be32(&ddr->debug[0], 0x10000); + debug("Setting D1[15] to 0x%08x\n", in_be32(&ddr->debug[0])); + + /* C: Set timing_cfg_2[cpo] to 0b11111 */ + setbits_be32(&ddr->timing_cfg_2, TIMING_CFG_2_CPO_MASK); + debug("Setting TMING_CFG_2[CPO] to 0x%08x\n", + in_be32(&ddr->timing_cfg_2)); + + /* D: Set D6 to 0x9f9f9f9f */ + out_be32(&ddr->debug[5], 0x9f9f9f9f); + debug("Setting D6 to 0x%08x\n", in_be32(&ddr->debug[5])); + + /* E: Set D7 to 0x9f9f9f9f */ + out_be32(&ddr->debug[6], 0x9f9f9f9f); + debug("Setting D7 to 0x%08x\n", in_be32(&ddr->debug[6])); + + /* F: Set D2[20] */ + setbits_be32(&ddr->debug[1], 0x800); + debug("Setting D2[20] to 0x%08x\n", in_be32(&ddr->debug[1])); + + /* G: Poll on D2[20] until cleared */ + while (in_be32(&ddr->debug[1]) & 0x800) + udelay(10000); /* throttle polling rate */ + + /* H: Clear D1[15] */ + clrbits_be32(&ddr->debug[0], 0x10000); + debug("Setting D1[15] to 0x%08x\n", in_be32(&ddr->debug[0])); + + /* I: Set sdram_cfg_2[odt_cfg] */ + setbits_be32(&ddr->sdram_cfg_2, + regs->ddr_sdram_cfg_2 & SDRAM_CFG2_ODT_CFG_MASK); + debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2)); + + /* Continuing with the DDR111 workaround */ + /* 5. Set D2[21] */ + setbits_be32(&ddr->debug[1], 0x400); + debug("Setting D2[21] to 0x%08x\n", in_be32(&ddr->debug[1])); + + /* 6. Poll D2[21] until its cleared */ + while (in_be32(&ddr->debug[1]) & 0x400) + udelay(10000); /* throttle polling rate */ + + /* 7. Wait for 400ms/GB */ + total_gb_size_per_controller = 0; + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + total_gb_size_per_controller += + ((regs->cs[i].bnds & 0xFFFF) >> 6) + - (regs->cs[i].bnds >> 22) + 1; } + if (in_be32(&ddr->sdram_cfg) & 0x80000) + total_gb_size_per_controller <<= 1; + debug("Wait for %d ms\n", total_gb_size_per_controller * 400); + udelay(total_gb_size_per_controller * 400000); + + /* 8. Set sdram_cfg_2[dinit] if options requires */ + setbits_be32(&ddr->sdram_cfg_2, + regs->ddr_sdram_cfg_2 & SDRAM_CFG2_D_INIT); + debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2)); + + /* 9. Poll until dinit is cleared */ + while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) + udelay(10000); + + /* 10. Clear EEBACR[3] */ + clrbits_be32(&ecm->eebacr, 10000000); + debug("Clearing EEBACR[3] to 0x%08x\n", in_be32(&ecm->eebacr)); +#endif /* CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 */ } |