diff options
Diffstat (limited to 'arch/powerpc/cpu')
35 files changed, 2567 insertions, 433 deletions
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 33e93c8..78c412d 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -66,6 +66,9 @@ COBJS-$(CONFIG_PPC_P2041) += ddr-gen3.o COBJS-$(CONFIG_PPC_P3041) += ddr-gen3.o COBJS-$(CONFIG_PPC_P4080) += ddr-gen3.o COBJS-$(CONFIG_PPC_P5020) += ddr-gen3.o +COBJS-$(CONFIG_PPC_P5040) += ddr-gen3.o +COBJS-$(CONFIG_PPC_T4240) += ddr-gen3.o +COBJS-$(CONFIG_PPC_B4860) += ddr-gen3.o COBJS-$(CONFIG_BSC9131) += ddr-gen3.o COBJS-$(CONFIG_CPM2) += ether_fcc.o @@ -80,10 +83,14 @@ COBJS-$(CONFIG_PPC_P2041) += p2041_ids.o COBJS-$(CONFIG_PPC_P3041) += p3041_ids.o COBJS-$(CONFIG_PPC_P4080) += p4080_ids.o COBJS-$(CONFIG_PPC_P5020) += p5020_ids.o +COBJS-$(CONFIG_PPC_P5040) += p5040_ids.o +COBJS-$(CONFIG_PPC_T4240) += t4240_ids.o +COBJS-$(CONFIG_PPC_B4860) += b4860_ids.o COBJS-$(CONFIG_QE) += qe_io.o COBJS-$(CONFIG_CPM2) += serial_scc.o -COBJS-$(CONFIG_FSL_CORENET) += fsl_corenet_serdes.o +COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS1) += fsl_corenet_serdes.o +COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS2) += fsl_corenet2_serdes.o # SoC specific SERDES support COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o @@ -110,6 +117,9 @@ COBJS-$(CONFIG_PPC_P2041) += p2041_serdes.o COBJS-$(CONFIG_PPC_P3041) += p3041_serdes.o COBJS-$(CONFIG_PPC_P4080) += p4080_serdes.o COBJS-$(CONFIG_PPC_P5020) += p5020_serdes.o +COBJS-$(CONFIG_PPC_P5040) += p5040_serdes.o +COBJS-$(CONFIG_PPC_T4240) += t4240_serdes.o +COBJS-$(CONFIG_PPC_B4860) += b4860_serdes.o COBJS = $(COBJS-y) COBJS += cpu.o diff --git a/arch/powerpc/cpu/mpc85xx/b4860_ids.c b/arch/powerpc/cpu/mpc85xx/b4860_ids.c new file mode 100644 index 0000000..7d33731 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/b4860_ids.c @@ -0,0 +1,141 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> + +#ifdef CONFIG_SYS_DPAA_QBMAN +struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { + /* dqrr liodn, frame data liodn, liodn off, sdest */ + SET_QP_INFO(1, 27, 1, 0), + SET_QP_INFO(2, 28, 1, 0), + SET_QP_INFO(3, 29, 1, 1), + SET_QP_INFO(4, 30, 1, 1), + SET_QP_INFO(5, 31, 1, 2), + SET_QP_INFO(6, 32, 1, 2), + SET_QP_INFO(7, 33, 1, 3), + SET_QP_INFO(8, 34, 1, 3), + SET_QP_INFO(9, 35, 1, 0), + SET_QP_INFO(10, 36, 1, 0), + SET_QP_INFO(11, 37, 1, 1), + SET_QP_INFO(12, 38, 1, 1), + SET_QP_INFO(13, 39, 1, 2), + SET_QP_INFO(14, 40, 1, 2), + SET_QP_INFO(15, 41, 1, 3), + SET_QP_INFO(16, 42, 1, 3), + SET_QP_INFO(17, 43, 1, 0), + SET_QP_INFO(18, 44, 1, 0), + SET_QP_INFO(19, 45, 1, 1), + SET_QP_INFO(20, 46, 1, 1), + SET_QP_INFO(21, 47, 1, 2), + SET_QP_INFO(22, 48, 1, 2), + SET_QP_INFO(23, 49, 1, 3), + SET_QP_INFO(24, 50, 1, 3), + SET_QP_INFO(25, 51, 1, 0), +}; +#endif + +struct srio_liodn_id_table srio_liodn_tbl[] = { + SET_SRIO_LIODN_1(1, 307), + SET_SRIO_LIODN_1(2, 387), +}; +int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl); + +struct liodn_id_table liodn_tbl[] = { +#ifdef CONFIG_SYS_DPAA_QBMAN + SET_QMAN_LIODN(62), + SET_BMAN_LIODN(63), +#endif + + SET_SDHC_LIODN(1, 552), + + SET_USB_LIODN(1, "fsl-usb2-mph", 553), + + SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148), + + SET_DMA_LIODN(1, 147), + SET_DMA_LIODN(2, 227), + + SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0), + SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0), + SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0), + SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0), + + /* SET_NEXUS_LIODN(557), -- not yet implemented */ +}; +int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_FMAN +struct liodn_id_table fman1_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(1, 0, 88), + SET_FMAN_RX_1G_LIODN(1, 1, 89), + SET_FMAN_RX_1G_LIODN(1, 2, 90), + SET_FMAN_RX_1G_LIODN(1, 3, 91), + SET_FMAN_RX_1G_LIODN(1, 4, 92), + SET_FMAN_RX_1G_LIODN(1, 5, 93), + SET_FMAN_RX_10G_LIODN(1, 0, 94), + SET_FMAN_RX_10G_LIODN(1, 1, 95), +}; +int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); +#endif + +struct liodn_id_table sec_liodn_tbl[] = { + SET_SEC_JR_LIODN_ENTRY(0, 454, 458), + SET_SEC_JR_LIODN_ENTRY(1, 455, 459), + SET_SEC_JR_LIODN_ENTRY(2, 456, 460), + SET_SEC_JR_LIODN_ENTRY(3, 457, 461), + SET_SEC_RTIC_LIODN_ENTRY(a, 453), + SET_SEC_RTIC_LIODN_ENTRY(b, 549), + SET_SEC_RTIC_LIODN_ENTRY(c, 550), + SET_SEC_RTIC_LIODN_ENTRY(d, 551), + SET_SEC_DECO_LIODN_ENTRY(0, 541, 610), + SET_SEC_DECO_LIODN_ENTRY(1, 542, 611), + SET_SEC_DECO_LIODN_ENTRY(2, 543, 612), + SET_SEC_DECO_LIODN_ENTRY(3, 544, 613), + SET_SEC_DECO_LIODN_ENTRY(4, 545, 614), + SET_SEC_DECO_LIODN_ENTRY(5, 546, 615), + SET_SEC_DECO_LIODN_ENTRY(6, 547, 616), + SET_SEC_DECO_LIODN_ENTRY(7, 548, 617), +}; +int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_RMAN +struct liodn_id_table rman_liodn_tbl[] = { + /* Set RMan block 0-3 liodn offset */ + SET_RMAN_LIODN(0, 678), + SET_RMAN_LIODN(1, 679), + SET_RMAN_LIODN(2, 680), + SET_RMAN_LIODN(3, 681), +}; +int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl); +#endif + +struct liodn_id_table liodn_bases[] = { + [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558), +#ifdef CONFIG_SYS_DPAA_FMAN + [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973), +#endif +#ifdef CONFIG_SYS_DPAA_RMAN + [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922), +#endif +}; diff --git a/arch/powerpc/cpu/mpc85xx/b4860_serdes.c b/arch/powerpc/cpu/mpc85xx/b4860_serdes.c new file mode 100644 index 0000000..9990202 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/b4860_serdes.c @@ -0,0 +1,162 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_serdes.h> +#include <asm/processor.h> +#include <asm/io.h> +#include "fsl_corenet2_serdes.h" + +struct serdes_config { + u8 protocol; + u8 lanes[SRDS_MAX_LANES]; +}; + +static struct serdes_config serdes1_cfg_tbl[] = { + /* SerDes 1 */ + {0x0D, {CPRI8, CPRI7, CPRI6, CPRI5, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x0E, {CPRI8, CPRI7, CPRI6, CPRI5, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x12, {CPRI8, CPRI7, CPRI6, CPRI5, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x2a, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + CPRI6, CPRI5, CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x30, {AURORA, AURORA, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x32, {AURORA, AURORA, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x33, {AURORA, AURORA, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x34, {AURORA, AURORA, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x3E, {CPRI8, CPRI7, CPRI6, CPRI5, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {} +}; +static struct serdes_config serdes2_cfg_tbl[] = { + /* SerDes 2 */ + {0x18, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + AURORA, AURORA, SRIO1, SRIO1}}, + {0x1D, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + AURORA, AURORA, SRIO1, SRIO1}}, + {0x2B, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SRIO2, SRIO2, + AURORA, AURORA, SRIO1, SRIO1}}, + {0x30, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SRIO2, SRIO2, + AURORA, AURORA, + SRIO1, SRIO1}}, + {0x49, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, AURORA, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {0x4A, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, AURORA, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {0x4C, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, AURORA, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {0x4E, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, AURORA, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {0x84, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SRIO2, SRIO2, AURORA, AURORA, + XFI_FM1_MAC9, XFI_FM1_MAC10}}, + {0x85, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SRIO2, SRIO2, AURORA, AURORA, + XFI_FM1_MAC9, XFI_FM1_MAC10}}, + {0x87, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SRIO2, SRIO2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + XFI_FM1_MAC9, XFI_FM1_MAC10}}, + {0x93, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + XAUI_FM1_MAC10, XAUI_FM1_MAC10, + XAUI_FM1_MAC10, XAUI_FM1_MAC10}}, + {0x9E, {PCIE1, PCIE1, PCIE1, PCIE1, + XAUI_FM1_MAC10, XAUI_FM1_MAC10, + XAUI_FM1_MAC10, XAUI_FM1_MAC10}}, + {0x9A, {PCIE1, PCIE1, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + XAUI_FM1_MAC10, XAUI_FM1_MAC10, + XAUI_FM1_MAC10, XAUI_FM1_MAC10}}, + {0xB2, {PCIE1, PCIE1, PCIE1, PCIE1, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + XFI_FM1_MAC9, XFI_FM1_MAC10}}, + {0xC3, {XAUI_FM1_MAC9, XAUI_FM1_MAC9, + XAUI_FM1_MAC9, XAUI_FM1_MAC9, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {} +}; +static struct serdes_config *serdes_cfg_tbl[] = { + serdes1_cfg_tbl, + serdes2_cfg_tbl, +}; + +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) +{ + struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->protocol) { + if (ptr->protocol == cfg) + return ptr->lanes[lane]; + ptr++; + } + + return 0; +} + +int is_serdes_prtcl_valid(int serdes, u32 prtcl) +{ + int i; + struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->protocol) { + if (ptr->protocol == prtcl) + break; + ptr++; + } + + if (!ptr->protocol) + return 0; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (ptr->lanes[i] != NONE) + return 1; + } + + return 0; +} diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index e8989bd..2be192d 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -76,11 +76,15 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC111) puts("Work-around for Erratum ESDHC111 enabled\n"); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A004468 + puts("Work-around for Erratum A004468 enabled\n"); +#endif #if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC135) puts("Work-around for Erratum ESDHC135 enabled\n"); #endif -#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC136) - puts("Work-around for Erratum ESDHC136 enabled\n"); +#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC13) + if (SVR_MAJ(svr) < 3) + puts("Work-around for Erratum ESDHC13 enabled\n"); #endif #if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC_A001) puts("Work-around for Erratum ESDHC-A001 enabled\n"); @@ -127,6 +131,12 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #ifdef CONFIG_SYS_FSL_ERRATUM_A004510 puts("Work-around for Erratum A004510 enabled\n"); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 + puts("Work-around for Erratum SRIO-A004034 enabled\n"); +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934 + puts("Work-around for Erratum A004934 enabled\n"); +#endif return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 5ddb294..db232e6 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -60,20 +60,32 @@ int checkcpu (void) uint major, minor; struct cpu_type *cpu; char buf1[32], buf2[32]; -#if defined(CONFIG_DDR_CLK_FREQ) || defined(CONFIG_FSL_CORENET) +#if (defined(CONFIG_DDR_CLK_FREQ) || \ + defined(CONFIG_FSL_CORENET)) && !defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); #endif /* CONFIG_FSL_CORENET */ -#ifdef CONFIG_DDR_CLK_FREQ - u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO) - >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; -#else + + /* + * Cornet platforms use ddr sync bit in RCW to indicate sync vs async + * mode. Previous platform use ddr ratio to do the same. This + * information is only for display here. + */ #ifdef CONFIG_FSL_CORENET +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + u32 ddr_sync = 0; /* only async mode is supported */ +#else u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC) >> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT; +#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ +#else /* CONFIG_FSL_CORENET */ +#ifdef CONFIG_DDR_CLK_FREQ + u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO) + >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; #else u32 ddr_ratio = 0; -#endif /* CONFIG_FSL_CORENET */ #endif /* CONFIG_DDR_CLK_FREQ */ +#endif /* CONFIG_FSL_CORENET */ + unsigned int i, core, nr_cores = cpu_numcores(); u32 mask = cpu_mask(); @@ -127,6 +139,11 @@ int checkcpu (void) printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr); + if (nr_cores > CONFIG_MAX_CPUS) { + panic("\nUnexpected number of cores: %d, max is %d\n", + nr_cores, CONFIG_MAX_CPUS); + } + get_sys_info(&sysinfo); puts("Clock Configuration:"); @@ -181,6 +198,10 @@ int checkcpu (void) } #endif +#if defined(CONFIG_FSL_IFC) + printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus)); +#endif + #ifdef CONFIG_CPM2 printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus)); #endif @@ -196,6 +217,10 @@ int checkcpu (void) } #endif +#ifdef CONFIG_SYS_DPAA_QBMAN + printf(" QMAN: %s MHz\n", strmhz(buf1, sysinfo.freqQMAN)); +#endif + #ifdef CONFIG_SYS_DPAA_PME printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freqPME)); #endif @@ -270,10 +295,7 @@ reset_85xx_watchdog(void) /* * Clear TSR(WIS) bit by writing 1 */ - unsigned long val; - val = mfspr(SPRN_TSR); - val |= TSR_WIS; - mtspr(SPRN_TSR, val); + mtspr(SPRN_TSR, TSR_WIS); } #endif /* CONFIG_WATCHDOG */ diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index afb5671..736293c 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -295,6 +295,43 @@ static void __fsl_serdes__init(void) } __attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void); +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +int enable_cluster_l2(void) +{ + int i = 0; + u32 cluster; + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + struct ccsr_cluster_l2 __iomem *l2cache; + + cluster = in_be32(&gur->tp_cluster[i].lower); + if (cluster & TP_CLUSTER_EOC) + return 0; + + /* The first cache has already been set up, so skip it */ + i++; + + /* Look through the remaining clusters, and set up their caches */ + do { + l2cache = (void __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2 + i * 0x40000); + cluster = in_be32(&gur->tp_cluster[i].lower); + + /* set stash ID to (cluster) * 2 + 32 + 1 */ + clrsetbits_be32(&l2cache->l2csr1, 0xff, 32 + i * 2 + 1); + + printf("enable l2 for cluster %d %p\n", i, l2cache); + + out_be32(&l2cache->l2csr0, L2CSR0_L2FI|L2CSR0_L2LFC); + while ((in_be32(&l2cache->l2csr0) & + (L2CSR0_L2FI|L2CSR0_L2LFC)) != 0) + ; + out_be32(&l2cache->l2csr0, L2CSR0_L2E); + i++; + } while (!(cluster & TP_CLUSTER_EOC)); + + return 0; +} +#endif + /* * Initialize L2 as cache. * @@ -306,7 +343,12 @@ int cpu_init_r(void) { __maybe_unused u32 svr = get_svr(); #ifdef CONFIG_SYS_LBC_LCRR - volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; + fsl_lbc_t *lbc = (void __iomem *)LBC_BASE_ADDR; +#endif +#ifdef CONFIG_L2_CACHE + ccsr_l2cache_t *l2cache = (void __iomem *)CONFIG_SYS_MPC85xx_L2_ADDR; +#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) + struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2; #endif #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \ @@ -356,7 +398,6 @@ int cpu_init_r(void) puts ("L2: "); #if defined(CONFIG_L2_CACHE) - volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR; volatile uint cache_ctl; uint ver; u32 l2siz_field; @@ -467,6 +508,11 @@ int cpu_init_r(void) } skip_l2: +#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) + if (l2cache->l2csr0 & L2CSR0_L2E) + printf("%d KB enabled\n", (l2cache->l2cfg0 & 0x3fff) * 64); + + enable_cluster_l2(); #else puts("disabled\n"); #endif @@ -478,7 +524,7 @@ skip_l2: #ifdef CONFIG_SYS_SRIO srio_init(); -#ifdef CONFIG_FSL_CORENET +#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER char *s = getenv("bootmaster"); if (s) { if (!strcmp(s, "SRIO1")) { @@ -497,11 +543,13 @@ skip_l2: setup_mp(); #endif -#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC136 +#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC13 { - void *p; - p = (void *)CONFIG_SYS_DCSRBAR + 0x20520; - setbits_be32(p, 1 << (31 - 14)); + if (SVR_MAJ(svr) < 3) { + void *p; + p = (void *)CONFIG_SYS_DCSRBAR + 0x20520; + setbits_be32(p, 1 << (31 - 14)); + } } #endif diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c index ca4ed62..f118dd5 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c @@ -18,12 +18,14 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num) { - unsigned int i; + unsigned int i, bus_width; volatile ccsr_ddr_t *ddr; u32 temp_sdram_cfg; + u32 total_gb_size_per_controller; + int timeout; #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 + int timeout_save; volatile ccsr_local_ecm_t *ecm = (void *)CONFIG_SYS_MPC85xx_ECM_ADDR; - u32 total_gb_size_per_controller; unsigned int csn_bnds_backup = 0, cs_sa, cs_ea, *csn_bnds_t; int csn = -1; #endif @@ -52,8 +54,8 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, return; } - out_be32(&ddr->eor, regs->ddr_eor); - + if (regs->ddr_eor) + out_be32(&ddr->eor, regs->ddr_eor); #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 debug("Workaround for ERRATUM_DDR111_DDR134\n"); for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { @@ -121,6 +123,11 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5); out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl); out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl); + if (regs->ddr_wrlvl_cntl_2) + out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2); + if (regs->ddr_wrlvl_cntl_3) + out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3); + out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr); out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1); out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2); @@ -134,6 +141,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->debug[i], regs->debug[i]); } } +#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934 + out_be32(&ddr->debug[28], 0x00003000); +#endif #ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474 out_be32(&ddr->debug[12], 0x00000015); @@ -270,9 +280,48 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN); asm volatile("sync;isync"); + total_gb_size_per_controller = 0; + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + if (!(regs->cs[i].config & 0x80000000)) + continue; + total_gb_size_per_controller += 1 << ( + ((regs->cs[i].config >> 14) & 0x3) + 2 + + ((regs->cs[i].config >> 8) & 0x7) + 12 + + ((regs->cs[i].config >> 0) & 0x7) + 8 + + 3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) - + 26); /* minus 26 (count of 64M) */ + } + if (fsl_ddr_get_intl3r() & 0x80000000) /* 3-way interleaving */ + total_gb_size_per_controller *= 3; + else if (regs->cs[0].config & 0x20000000) /* 2-way interleaving */ + total_gb_size_per_controller <<= 1; + /* + * total memory / bus width = transactions needed + * transactions needed / data rate = seconds + * to add plenty of buffer, double the time + * For example, 2GB on 666MT/s 64-bit bus takes about 402ms + * Let's wait for 800ms + */ + bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK) + >> SDRAM_CFG_DBW_SHIFT); + timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 / + (get_ddr_freq(0) >> 20)) << 1; +#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 + timeout_save = timeout; +#endif + total_gb_size_per_controller >>= 4; /* shift down to gb size */ + debug("total %d GB\n", total_gb_size_per_controller); + debug("Need to wait up to %d * 10ms\n", timeout); + /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */ - while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) + while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) && + (timeout >= 0)) { udelay(10000); /* throttle polling rate */ + timeout--; + } + + if (timeout <= 0) + printf("Waiting for D_INIT timeout. Memory may not work.\n"); #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 /* continue this workaround */ @@ -330,23 +379,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, while (in_be32(&ddr->debug[1]) & 0x400) udelay(10000); /* throttle polling rate */ - /* 7. Wait for 400ms/GB */ - total_gb_size_per_controller = 0; - for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { - if (i == csn) { - total_gb_size_per_controller += - ((csn_bnds_backup & 0xFFFF) >> 6) - - (csn_bnds_backup >> 22) + 1; - } else { - total_gb_size_per_controller += - ((regs->cs[i].bnds & 0xFFFF) >> 6) - - (regs->cs[i].bnds >> 22) + 1; - } - } - if (in_be32(&ddr->sdram_cfg) & 0x80000) - total_gb_size_per_controller <<= 1; - debug("Wait for %d ms\n", total_gb_size_per_controller * 400); - udelay(total_gb_size_per_controller * 400000); + /* 7. Wait for state machine 2nd run, roughly 400ms/GB */ + debug("Wait for %d * 10ms\n", timeout_save); + udelay(timeout_save * 10000); /* 8. Set sdram_cfg_2[dinit] if options requires */ setbits_be32(&ddr->sdram_cfg_2, @@ -354,8 +389,16 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2)); /* 9. Poll until dinit is cleared */ - while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) - udelay(10000); + timeout = timeout_save; + debug("Need to wait up to %d * 10ms\n", timeout); + while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) && + (timeout >= 0)) { + udelay(10000); /* throttle polling rate */ + timeout--; + } + + if (timeout <= 0) + printf("Waiting for D_INIT timeout. Memory may not work.\n"); /* 10. Clear EEBACR[3] */ clrbits_be32(&ecm->eebacr, 10000000); diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index a0a9b4c..ab09330 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -47,8 +47,8 @@ extern void ft_srio_setup(void *blob); void ft_fixup_cpu(void *blob, u64 memory_limit) { int off; - ulong spin_tbl_addr = get_spin_phys_addr(); - u32 bootpg = determine_mp_bootpg(); + phys_addr_t spin_tbl_addr = get_spin_phys_addr(); + u32 bootpg = determine_mp_bootpg(NULL); u32 id = get_my_id(); const char *enable_method; @@ -97,7 +97,16 @@ void ft_fixup_cpu(void *blob, u64 memory_limit) if ((u64)bootpg < memory_limit) { off = fdt_add_mem_rsv(blob, bootpg, (u64)4096); if (off < 0) - printf("%s: %s\n", __FUNCTION__, fdt_strerror(off)); + printf("Failed to reserve memory for bootpg: %s\n", + fdt_strerror(off)); + } + /* Reserve spin table page */ + if (spin_tbl_addr < memory_limit) { + off = fdt_add_mem_rsv(blob, + (spin_tbl_addr & ~0xffful), 4096); + if (off < 0) + printf("Failed to reserve memory for spin table: %s\n", + fdt_strerror(off)); } } #endif @@ -220,12 +229,19 @@ static inline void ft_fixup_l2cache(void *blob) /* we dont bother w/L3 since no platform of this type has one */ } -#elif defined(CONFIG_BACKSIDE_L2_CACHE) +#elif defined(CONFIG_BACKSIDE_L2_CACHE) || \ + defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) static inline void ft_fixup_l2cache(void *blob) { int off, l2_off, l3_off = -1; u32 *ph; +#ifdef CONFIG_BACKSIDE_L2_CACHE u32 l2cfg0 = mfspr(SPRN_L2CFG0); +#else + struct ccsr_cluster_l2 *l2cache = + (struct ccsr_cluster_l2 __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2); + u32 l2cfg0 = in_be32(&l2cache->l2cfg0); +#endif u32 size, line_size, num_ways, num_sets; int has_l2 = 1; @@ -257,7 +273,12 @@ static inline void ft_fixup_l2cache(void *blob) if (has_l2) { #ifdef CONFIG_SYS_CACHE_STASHING u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + /* Only initialize every eighth thread */ + if (reg && !((*reg) % 8)) +#else if (reg) +#endif fdt_setprop_cell(blob, l2_off, "cache-stash-id", (*reg * 2) + 32 + 1); #endif @@ -390,6 +411,11 @@ static void ft_fixup_dpaa_clks(void *blob) #endif #endif +#ifdef CONFIG_SYS_DPAA_QBMAN + do_fixup_by_compat_u32(blob, "fsl,qman", + "clock-frequency", sysinfo.freqQMAN, 1); +#endif + #ifdef CONFIG_SYS_DPAA_PME do_fixup_by_compat_u32(blob, "fsl,pme", "clock-frequency", sysinfo.freqPME, 1); diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c new file mode 100644 index 0000000..01dcdf6 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c @@ -0,0 +1,203 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_serdes.h> +#include <asm/immap_85xx.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <asm/fsl_law.h> +#include <asm/errno.h> +#include "fsl_corenet2_serdes.h" + +static u64 serdes1_prtcl_map; +static u64 serdes2_prtcl_map; +#ifdef CONFIG_SYS_FSL_SRDS_3 +static u64 serdes3_prtcl_map; +#endif +#ifdef CONFIG_SYS_FSL_SRDS_4 +static u64 serdes4_prtcl_map; +#endif + +#ifdef DEBUG +static const char *serdes_prtcl_str[] = { + [NONE] = "NA", + [PCIE1] = "PCIE1", + [PCIE2] = "PCIE2", + [PCIE3] = "PCIE3", + [PCIE4] = "PCIE4", + [SATA1] = "SATA1", + [SATA2] = "SATA2", + [SRIO1] = "SRIO1", + [SRIO2] = "SRIO2", + [SGMII_FM1_DTSEC1] = "SGMII_FM1_DTSEC1", + [SGMII_FM1_DTSEC2] = "SGMII_FM1_DTSEC2", + [SGMII_FM1_DTSEC3] = "SGMII_FM1_DTSEC3", + [SGMII_FM1_DTSEC4] = "SGMII_FM1_DTSEC4", + [SGMII_FM1_DTSEC5] = "SGMII_FM1_DTSEC5", + [SGMII_FM1_DTSEC6] = "SGMII_FM1_DTSEC6", + [SGMII_FM2_DTSEC1] = "SGMII_FM2_DTSEC1", + [SGMII_FM2_DTSEC2] = "SGMII_FM2_DTSEC2", + [SGMII_FM2_DTSEC3] = "SGMII_FM2_DTSEC3", + [SGMII_FM2_DTSEC4] = "SGMII_FM2_DTSEC4", + [XAUI_FM1] = "XAUI_FM1", + [XAUI_FM2] = "XAUI_FM2", + [AURORA] = "DEBUG", + [CPRI1] = "CPRI1", + [CPRI2] = "CPRI2", + [CPRI3] = "CPRI3", + [CPRI4] = "CPRI4", + [CPRI5] = "CPRI5", + [CPRI6] = "CPRI6", + [CPRI7] = "CPRI7", + [CPRI8] = "CPRI8", + [XAUI_FM1_MAC9] = "XAUI_FM1_MAC9", + [XAUI_FM1_MAC10] = "XAUI_FM1_MAC10", + [XAUI_FM2_MAC9] = "XAUI_FM2_MAC9", + [XAUI_FM2_MAC10] = "XAUI_FM2_MAC10", + [HIGIG_FM1_MAC9] = "HiGig_FM1_MAC9", + [HIGIG_FM1_MAC10] = "HiGig_FM1_MAC10", + [HIGIG_FM2_MAC9] = "HiGig_FM2_MAC9", + [HIGIG_FM2_MAC10] = "HiGig_FM2_MAC10", + [QSGMII_FM1_A] = "QSGMII_FM1_A", + [QSGMII_FM1_B] = "QSGMII_FM1_B", + [QSGMII_FM2_A] = "QSGMII_FM2_A", + [QSGMII_FM2_B] = "QSGMII_FM2_B", + [XFI_FM1_MAC9] = "XFI_FM1_MAC9", + [XFI_FM1_MAC10] = "XFI_FM1_MAC10", + [XFI_FM2_MAC9] = "XFI_FM2_MAC9", + [XFI_FM2_MAC10] = "XFI_FM2_MAC10", + [INTERLAKEN] = "INTERLAKEN", +}; +#endif + +int is_serdes_configured(enum srds_prtcl device) +{ + u64 ret = 0; + + ret |= (1ULL << device) & serdes1_prtcl_map; + ret |= (1ULL << device) & serdes2_prtcl_map; +#ifdef CONFIG_SYS_FSL_SRDS_3 + ret |= (1ULL << device) & serdes3_prtcl_map; +#endif +#ifdef CONFIG_SYS_FSL_SRDS_4 + ret |= (1ULL << device) & serdes4_prtcl_map; +#endif + + return !!ret; +} + +int serdes_get_first_lane(u32 sd, enum srds_prtcl device) +{ + const ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 cfg = in_be32(&gur->rcwsr[4]); + int i; + + switch (sd) { + case FSL_SRDS_1: + cfg &= FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + cfg >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + break; + case FSL_SRDS_2: + cfg &= FSL_CORENET2_RCWSR4_SRDS2_PRTCL; + cfg >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; + break; +#ifdef CONFIG_SYS_FSL_SRDS_3 + case FSL_SRDS_3: + cfg &= FSL_CORENET2_RCWSR4_SRDS3_PRTCL; + cfg >>= FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT; + break; +#endif +#ifdef CONFIG_SYS_FSL_SRDS_4 + case FSL_SRDS_4: + cfg &= FSL_CORENET2_RCWSR4_SRDS4_PRTCL; + cfg >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT; + break; +#endif + default: + printf("invalid SerDes%d\n", sd); + break; + } + /* Is serdes enabled at all? */ + if (unlikely(cfg == 0)) + return -ENODEV; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (serdes_get_prtcl(sd, cfg, i) == device) + return i; + } + + return -ENODEV; +} + +u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u64 serdes_prtcl_map = 0; + u32 cfg; + int lane; + + cfg = in_be32(&gur->rcwsr[4]) & sd_prctl_mask; + /* Is serdes enabled at all? */ + if (!cfg) { + printf("SERDES%d is not enabled\n", sd + 1); + return 0; + } + + cfg >>= sd_prctl_shift; + printf("Using SERDES%d Protocol: 0x%x\n", sd + 1, cfg); + if (!is_serdes_prtcl_valid(sd, cfg)) + printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg); + + for (lane = 0; lane < SRDS_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes_get_prtcl(sd, cfg, lane); + serdes_prtcl_map |= (1ULL << lane_prtcl); + } + + return serdes_prtcl_map; +} + +void fsl_serdes_init(void) +{ + + serdes1_prtcl_map = serdes_init(FSL_SRDS_1, + CONFIG_SYS_FSL_CORENET_SERDES_ADDR, + FSL_CORENET2_RCWSR4_SRDS1_PRTCL, + FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT); + serdes2_prtcl_map = serdes_init(FSL_SRDS_2, + CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_2 * 0x1000, + FSL_CORENET2_RCWSR4_SRDS2_PRTCL, + FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT); +#ifdef CONFIG_SYS_FSL_SRDS_3 + serdes3_prtcl_map = serdes_init(FSL_SRDS_3, + CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_3 * 0x1000, + FSL_CORENET2_RCWSR4_SRDS3_PRTCL, + FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT); +#endif +#ifdef CONFIG_SYS_FSL_SRDS_4 + serdes4_prtcl_map = serdes_init(FSL_SRDS_4, + CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_4 * 0x1000, + FSL_CORENET2_RCWSR4_SRDS4_PRTCL, + FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT); +#endif + +} diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h new file mode 100644 index 0000000..2258f41 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h @@ -0,0 +1,26 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __FSL_CORENET2_SERDES_H +#define __FSL_CORENET2_SERDES_H + +int is_serdes_prtcl_valid(int serdes, u32 prtcl); +int serdes_lane_enabled(int lane); +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane); +#endif /* __FSL_CORENET2_SERDES_H */ diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c index 2a68060..e6b1b1b 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c @@ -92,10 +92,17 @@ static const struct { { 17, 163, FSL_SRDS_BANK_2 }, { 18, 164, FSL_SRDS_BANK_2 }, { 19, 165, FSL_SRDS_BANK_2 }, +#ifdef CONFIG_PPC_P4080 { 20, 170, FSL_SRDS_BANK_3 }, { 21, 171, FSL_SRDS_BANK_3 }, { 22, 172, FSL_SRDS_BANK_3 }, { 23, 173, FSL_SRDS_BANK_3 }, +#else + { 20, 166, FSL_SRDS_BANK_3 }, + { 21, 167, FSL_SRDS_BANK_3 }, + { 22, 168, FSL_SRDS_BANK_3 }, + { 23, 169, FSL_SRDS_BANK_3 }, +#endif }; int serdes_get_lane_idx(int lane) @@ -493,6 +500,9 @@ void fsl_serdes_init(void) ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); int cfg; serdes_corenet_t *srds_regs; +#ifdef CONFIG_PPC_P5040 + serdes_corenet_t *srds2_regs; +#endif int lane, bank, idx; int have_bank[SRDS_MAX_BANK] = {}; #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 @@ -574,6 +584,34 @@ void fsl_serdes_init(void) } } +#ifdef CONFIG_PPC_P5040 + /* + * Lanes on bank 4 on P5040 are commented-out, but for some SERDES + * protocols, these lanes are routed to SATA. We use serdes_prtcl_map + * to decide whether a protocol is supported on a given lane, so SATA + * will be identified as not supported, and therefore not initialized. + * So for protocols which use SATA on bank4, we add SATA support in + * serdes_prtcl_map. + */ + switch (cfg) { + case 0x0: + case 0x1: + case 0x2: + case 0x3: + case 0x4: + case 0x5: + case 0x6: + case 0x7: + serdes_prtcl_map |= 1 << SATA1 | 1 << SATA2; + break; + default: + srds2_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES2_ADDR; + + /* We don't need bank 4, so power it down */ + setbits_be32(&srds2_regs->bank[0].rstctl, SRDS_RSTCTL_SDPD); + } +#endif + soc_serdes_init(); #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 @@ -617,6 +655,38 @@ void fsl_serdes_init(void) } } +#ifdef CONFIG_SYS_FSL_ERRATUM_A004699 + /* + * To avoid the situation that resulted in the P4080 erratum + * SERDES-8, a given SerDes bank will use the PLLs from the previous + * bank if one of the PLL frequencies is a multiple of the other. For + * instance, if bank 3 is running at 2.5GHz and bank 2 is at 1.25GHz, + * then bank 3 will use bank 2's PLL. P5040 Erratum A-004699 says + * that, in this situation, lane synchronization is not initiated. So + * when we detect a bank with a "borrowed" PLL, we have to manually + * initiate lane synchronization. + */ + for (bank = FSL_SRDS_BANK_2; bank <= FSL_SRDS_BANK_3; bank++) { + /* Determine the first lane for this bank */ + unsigned int lane; + + for (lane = 0; lane < SRDS_MAX_LANES; lane++) + if (lanes[lane].bank == bank) + break; + idx = lanes[lane].idx; + + /* + * Check if the PLL for the bank is borrowed. The UOTHL + * bit of the first lane will tell us that. + */ + if (in_be32(&srds_regs->lane[idx].gcr0) & SRDS_GCR0_UOTHL) { + /* Manually start lane synchronization */ + setbits_be32(&srds_regs->bank[bank].pllcr0, + SRDS_PLLCR0_PVCOCNT_EN); + } + } +#endif + #if defined(CONFIG_SYS_P4080_ERRATUM_SERDES8) || defined (CONFIG_SYS_P4080_ERRATUM_SERDES9) for (lane = 0; lane < SRDS_MAX_LANES; lane++) { enum srds_prtcl lane_prtcl; diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h index f261351..3c551e9 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h @@ -22,9 +22,6 @@ #ifndef __FSL_CORENET_SERDES_H #define __FSL_CORENET_SERDES_H -#define SRDS_MAX_LANES 18 -#define SRDS_MAX_BANK 3 - enum srds_bank { FSL_SRDS_BANK_1 = 0, FSL_SRDS_BANK_2 = 1, diff --git a/arch/powerpc/cpu/mpc85xx/liodn.c b/arch/powerpc/cpu/mpc85xx/liodn.c index 11881c9..2e53367 100644 --- a/arch/powerpc/cpu/mpc85xx/liodn.c +++ b/arch/powerpc/cpu/mpc85xx/liodn.c @@ -40,6 +40,7 @@ int get_dpaa_liodn(enum fsl_dpaa_dev dpaa_dev, u32 *liodns, int liodn_offset) return liodn_bases[dpaa_dev].num_ids; } +#ifdef CONFIG_SYS_SRIO static void set_srio_liodn(struct srio_liodn_id_table *tbl, int size) { int i; @@ -54,6 +55,7 @@ static void set_srio_liodn(struct srio_liodn_id_table *tbl, int size) } } } +#endif static void set_liodn(struct liodn_id_table *tbl, int size) { @@ -181,8 +183,10 @@ void set_liodns(void) /* setup general liodn offsets */ set_liodn(liodn_tbl, liodn_tbl_sz); +#ifdef CONFIG_SYS_SRIO /* setup SRIO port liodns */ set_srio_liodn(srio_liodn_tbl, srio_liodn_tbl_sz); +#endif /* setup SEC block liodn bases & offsets if we have one */ if (IS_E_PROCESSOR(get_svr())) { @@ -219,6 +223,7 @@ void set_liodns(void) #endif } +#ifdef CONFIG_SYS_SRIO static void fdt_fixup_srio_liodn(void *blob, struct srio_liodn_id_table *tbl) { int i, srio_off; @@ -247,6 +252,57 @@ static void fdt_fixup_srio_liodn(void *blob, struct srio_liodn_id_table *tbl) } } } +#endif + +#define CONFIG_SYS_MAX_PCI_EPS 8 +#define CONFIG_SYS_PCI_EP_LIODN_START 256 + +static void fdt_fixup_pci_liodn_offsets(void *fdt, const char *compat) +{ + int off, pci_idx = 0, pci_cnt = 0, i, rc; + const uint32_t *base_liodn; + uint32_t liodn_offs[CONFIG_SYS_MAX_PCI_EPS + 1] = { 0 }; + + /* + * Count the number of pci nodes. + * It's needed later when the interleaved liodn offsets are generated. + */ + off = fdt_node_offset_by_compatible(fdt, -1, compat); + while (off != -FDT_ERR_NOTFOUND) { + pci_cnt++; + off = fdt_node_offset_by_compatible(fdt, off, compat); + } + + for (off = fdt_node_offset_by_compatible(fdt, -1, compat); + off != -FDT_ERR_NOTFOUND; + off = fdt_node_offset_by_compatible(fdt, off, compat)) { + base_liodn = fdt_getprop(fdt, off, "fsl,liodn", &rc); + if (!base_liodn) { + char path[64]; + + if (fdt_get_path(fdt, off, path, sizeof(path)) < 0) + strcpy(path, "(unknown)"); + printf("WARNING Could not get liodn of node %s: %s\n", + path, fdt_strerror(rc)); + continue; + } + for (i = 0; i < CONFIG_SYS_MAX_PCI_EPS; i++) + liodn_offs[i + 1] = CONFIG_SYS_PCI_EP_LIODN_START + + i * pci_cnt + pci_idx - *base_liodn; + rc = fdt_setprop(fdt, off, "fsl,liodn-offset-list", + liodn_offs, sizeof(liodn_offs)); + if (rc) { + char path[64]; + + if (fdt_get_path(fdt, off, path, sizeof(path)) < 0) + strcpy(path, "(unknown)"); + printf("WARNING Unable to set fsl,liodn-offset-list for " + "node %s: %s\n", path, fdt_strerror(rc)); + continue; + } + pci_idx++; + } +} static void fdt_fixup_liodn_tbl(void *blob, struct liodn_id_table *tbl, int sz) { @@ -277,7 +333,9 @@ static void fdt_fixup_liodn_tbl(void *blob, struct liodn_id_table *tbl, int sz) void fdt_fixup_liodn(void *blob) { +#ifdef CONFIG_SYS_SRIO fdt_fixup_srio_liodn(blob, srio_liodn_tbl); +#endif fdt_fixup_liodn_tbl(blob, liodn_tbl, liodn_tbl_sz); #ifdef CONFIG_SYS_DPAA_FMAN @@ -295,4 +353,6 @@ void fdt_fixup_liodn(void *blob) #ifdef CONFIG_SYS_DPAA_RMAN fdt_fixup_liodn_tbl(blob, rman_liodn_tbl, rman_liodn_tbl_sz); #endif + + fdt_fixup_pci_liodn_offsets(blob, "fsl,qoriq-pcie-v2.4"); } diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c index ffc2a9a..e1197ac 100644 --- a/arch/powerpc/cpu/mpc85xx/mp.c +++ b/arch/powerpc/cpu/mpc85xx/mp.c @@ -27,9 +27,13 @@ #include <asm/io.h> #include <asm/mmu.h> #include <asm/fsl_law.h> +#include <asm/fsl_ddr_sdram.h> #include "mp.h" DECLARE_GLOBAL_DATA_PTR; +u32 fsl_ddr_get_intl3r(void); + +extern u32 __spin_table[]; u32 get_my_id() { @@ -76,17 +80,16 @@ int cpu_status(int nr) return 0; if (nr == id) { - table = (u32 *)get_spin_virt_addr(); + table = (u32 *)&__spin_table; printf("table base @ 0x%p\n", table); } else { - table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY; + table = (u32 *)&__spin_table + nr * NUM_BOOT_ENTRY; printf("Running on cpu %d\n", id); printf("\n"); printf("table @ 0x%p\n", table); printf(" addr - 0x%08x\n", table[BOOT_ENTRY_ADDR_LOWER]); - printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]); printf(" r3 - 0x%08x\n", table[BOOT_ENTRY_R3_LOWER]); - printf(" r6 - 0x%08x\n", table[BOOT_ENTRY_R6_LOWER]); + printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]); } return 0; @@ -149,12 +152,11 @@ static u8 boot_entry_map[4] = { 0, BOOT_ENTRY_PIR, BOOT_ENTRY_R3_LOWER, - BOOT_ENTRY_R6_LOWER, }; int cpu_release(int nr, int argc, char * const argv[]) { - u32 i, val, *table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY; + u32 i, val, *table = (u32 *)&__spin_table + nr * NUM_BOOT_ENTRY; u64 boot_addr; if (hold_cores_in_reset(1)) @@ -172,8 +174,8 @@ int cpu_release(int nr, int argc, char * const argv[]) boot_addr = simple_strtoull(argv[0], NULL, 16); - /* handle pir, r3, r6 */ - for (i = 1; i < 4; i++) { + /* handle pir, r3 */ + for (i = 1; i < 3; i++) { if (argv[i][0] != '-') { u8 entry = boot_entry_map[i]; val = simple_strtoul(argv[i], NULL, 16); @@ -191,38 +193,80 @@ int cpu_release(int nr, int argc, char * const argv[]) return 0; } -u32 determine_mp_bootpg(void) +u32 determine_mp_bootpg(unsigned int *pagesize) { - /* if we have 4G or more of memory, put the boot page at 4Gb-4k */ - if ((u64)gd->ram_size > 0xfffff000) - return (0xfffff000); + u32 bootpg; +#ifdef CONFIG_SYS_FSL_ERRATUM_A004468 + u32 svr = get_svr(); + u32 granule_size, check; + struct law_entry e; +#endif - return (gd->ram_size - 4096); -} -ulong get_spin_phys_addr(void) -{ - extern ulong __secondary_start_page; - extern ulong __spin_table; + /* use last 4K of mapped memory */ + bootpg = ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ? + CONFIG_MAX_MEM_MAPPED : gd->ram_size) + + CONFIG_SYS_SDRAM_BASE - 4096; + if (pagesize) + *pagesize = 4096; + +#ifdef CONFIG_SYS_FSL_ERRATUM_A004468 +/* + * Erratum A004468 has two parts. The 3-way interleaving applies to T4240, + * to be fixed in rev 2.0. The 2-way interleaving applies to many SoCs. But + * the way boot page chosen in u-boot avoids hitting this erratum. So only + * thw workaround for 3-way interleaving is needed. + * + * To make sure boot page translation works with 3-Way DDR interleaving + * enforce a check for the following constrains + * 8K granule size requires BRSIZE=8K and + * bootpg >> log2(BRSIZE) %3 == 1 + * 4K and 1K granule size requires BRSIZE=4K and + * bootpg >> log2(BRSIZE) %3 == 0 + */ + if (SVR_SOC_VER(svr) == SVR_T4240 && SVR_MAJ(svr) < 2) { + e = find_law(bootpg); + switch (e.trgt_id) { + case LAW_TRGT_IF_DDR_INTLV_123: + granule_size = fsl_ddr_get_intl3r() & 0x1f; + if (granule_size == FSL_DDR_3WAY_8KB_INTERLEAVING) { + if (pagesize) + *pagesize = 8192; + bootpg &= 0xffffe000; /* align to 8KB */ + check = bootpg >> 13; + while ((check % 3) != 1) + check--; + bootpg = check << 13; + debug("Boot page (8K) at 0x%08x\n", bootpg); + break; + } else { + bootpg &= 0xfffff000; /* align to 4KB */ + check = bootpg >> 12; + while ((check % 3) != 0) + check--; + bootpg = check << 12; + debug("Boot page (4K) at 0x%08x\n", bootpg); + } + break; + default: + break; + } + } +#endif /* CONFIG_SYS_FSL_ERRATUM_A004468 */ - return (determine_mp_bootpg() + - (ulong)&__spin_table - (ulong)&__secondary_start_page); + return bootpg; } -ulong get_spin_virt_addr(void) +phys_addr_t get_spin_phys_addr(void) { - extern ulong __secondary_start_page; - extern ulong __spin_table; - - return (CONFIG_BPTR_VIRT_ADDR + - (ulong)&__spin_table - (ulong)&__secondary_start_page); + return virt_to_phys(&__spin_table); } #ifdef CONFIG_FSL_CORENET -static void plat_mp_up(unsigned long bootpg) +static void plat_mp_up(unsigned long bootpg, unsigned int pagesize) { - u32 cpu_up_mask, whoami; - u32 *table = (u32 *)get_spin_virt_addr(); + u32 cpu_up_mask, whoami, brsize = LAW_SIZE_4K; + u32 *table = (u32 *)&__spin_table; volatile ccsr_gur_t *gur; volatile ccsr_local_t *ccm; volatile ccsr_rcpm_t *rcpm; @@ -241,7 +285,11 @@ static void plat_mp_up(unsigned long bootpg) out_be32(&ccm->bstrl, bootpg); e = find_law(bootpg); - out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | LAW_SIZE_4K); + /* pagesize is only 4K or 8K */ + if (pagesize == 8192) + brsize = LAW_SIZE_8K; + out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | brsize); + debug("BRSIZE is 0x%x\n", brsize); /* readback to sync write */ in_be32(&ccm->bstrar); @@ -294,10 +342,10 @@ static void plat_mp_up(unsigned long bootpg) #endif } #else -static void plat_mp_up(unsigned long bootpg) +static void plat_mp_up(unsigned long bootpg, unsigned int pagesize) { u32 up, cpu_up_mask, whoami; - u32 *table = (u32 *)get_spin_virt_addr(); + u32 *table = (u32 *)&__spin_table; volatile u32 bpcr; volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); @@ -374,27 +422,52 @@ static void plat_mp_up(unsigned long bootpg) void cpu_mp_lmb_reserve(struct lmb *lmb) { - u32 bootpg = determine_mp_bootpg(); + u32 bootpg = determine_mp_bootpg(NULL); lmb_reserve(lmb, bootpg, 4096); } void setup_mp(void) { - extern ulong __secondary_start_page; - extern ulong __bootpg_addr; - ulong fixup = (ulong)&__secondary_start_page; - u32 bootpg = determine_mp_bootpg(); + extern u32 __secondary_start_page; + extern u32 __bootpg_addr, __spin_table_addr, __second_half_boot_page; + + int i; + ulong fixup = (u32)&__secondary_start_page; + u32 bootpg, bootpg_map, pagesize; + + bootpg = determine_mp_bootpg(&pagesize); + + /* + * pagesize is only 4K or 8K + * we only use the last 4K of boot page + * bootpg_map saves the address for the boot page + * 8K is used for the workaround of 3-way DDR interleaving + */ + + bootpg_map = bootpg; + + if (pagesize == 8192) + bootpg += 4096; /* use 2nd half */ /* Some OSes expect secondary cores to be held in reset */ if (hold_cores_in_reset(0)) return; - /* Store the bootpg's SDRAM address for use by secondary CPU cores */ - __bootpg_addr = bootpg; + /* + * Store the bootpg's cache-able half address for use by secondary + * CPU cores to continue to boot + */ + __bootpg_addr = (u32)virt_to_phys(&__second_half_boot_page); + + /* Store spin table's physical address for use by secondary cores */ + __spin_table_addr = (u32)get_spin_phys_addr(); + + /* flush bootpg it before copying invalidate any staled cacheline */ + flush_cache(bootpg, 4096); /* look for the tlb covering the reset page, there better be one */ - int i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1); + i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1); /* we found a match */ if (i != -1) { @@ -407,7 +480,7 @@ void setup_mp(void) memcpy((void *)CONFIG_BPTR_VIRT_ADDR, (void *)fixup, 4096); - plat_mp_up(bootpg); + plat_mp_up(bootpg_map, pagesize); } else { puts("WARNING: No reset page TLB. " "Skipping secondary core setup\n"); diff --git a/arch/powerpc/cpu/mpc85xx/mp.h b/arch/powerpc/cpu/mpc85xx/mp.h index 87bac37..ad9950b 100644 --- a/arch/powerpc/cpu/mpc85xx/mp.h +++ b/arch/powerpc/cpu/mpc85xx/mp.h @@ -3,8 +3,7 @@ #include <asm/mp.h> -ulong get_spin_phys_addr(void); -ulong get_spin_virt_addr(void); +phys_addr_t get_spin_phys_addr(void); u32 get_my_id(void); int hold_cores_in_reset(int verbose); @@ -16,7 +15,7 @@ int hold_cores_in_reset(int verbose); #define BOOT_ENTRY_PIR 5 #define BOOT_ENTRY_R6_UPPER 6 #define BOOT_ENTRY_R6_LOWER 7 -#define NUM_BOOT_ENTRY 8 +#define NUM_BOOT_ENTRY 16 /* pad to 64 bytes */ #define SIZE_BOOT_ENTRY (NUM_BOOT_ENTRY * sizeof(u32)) #endif diff --git a/arch/powerpc/cpu/mpc85xx/p5040_ids.c b/arch/powerpc/cpu/mpc85xx/p5040_ids.c new file mode 100644 index 0000000..878ee3e --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/p5040_ids.c @@ -0,0 +1,127 @@ +/* + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> + +#ifdef CONFIG_SYS_DPAA_QBMAN +struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { + /* dqrr liodn, frame data liodn, liodn off, sdest */ + SET_QP_INFO(1, 2, 1, 0), + SET_QP_INFO(3, 4, 2, 1), + SET_QP_INFO(5, 6, 3, 2), + SET_QP_INFO(7, 8, 4, 3), + SET_QP_INFO(9, 10, 5, 0), + SET_QP_INFO(11, 12, 6, 1), + SET_QP_INFO(13, 14, 7, 2), + SET_QP_INFO(15, 16, 8, 3), + SET_QP_INFO(17, 18, 9, 0), /* for now, set sdest to 0 */ + SET_QP_INFO(19, 20, 10, 0), /* for now, set sdest to 0 */ +}; +#endif + +struct liodn_id_table liodn_tbl[] = { +#ifdef CONFIG_SYS_DPAA_QBMAN + SET_QMAN_LIODN(31), + SET_BMAN_LIODN(32), +#endif + + SET_SDHC_LIODN(1, 64), + + SET_USB_LIODN(1, "fsl-usb2-mph", 93), + SET_USB_LIODN(2, "fsl-usb2-dr", 94), + + SET_SATA_LIODN(1, 95), + SET_SATA_LIODN(2, 96), + + SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 195), + SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 196), + SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 197), + + SET_DMA_LIODN(1, 193), + SET_DMA_LIODN(2, 194), +}; +int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_FMAN +struct liodn_id_table fman1_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(1, 0, 6), + SET_FMAN_RX_1G_LIODN(1, 1, 7), + SET_FMAN_RX_1G_LIODN(1, 2, 8), + SET_FMAN_RX_1G_LIODN(1, 3, 9), + SET_FMAN_RX_1G_LIODN(1, 4, 10), + SET_FMAN_RX_10G_LIODN(1, 0, 11), +}; +int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); + +#if (CONFIG_SYS_NUM_FMAN == 2) +struct liodn_id_table fman2_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(2, 0, 12), + SET_FMAN_RX_1G_LIODN(2, 1, 13), + SET_FMAN_RX_1G_LIODN(2, 2, 14), + SET_FMAN_RX_1G_LIODN(2, 3, 15), + SET_FMAN_RX_1G_LIODN(2, 4, 16), + SET_FMAN_RX_10G_LIODN(2, 0, 17), +}; +int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl); +#endif +#endif + +struct liodn_id_table sec_liodn_tbl[] = { + SET_SEC_JR_LIODN_ENTRY(0, 129, 130), + SET_SEC_JR_LIODN_ENTRY(1, 131, 132), + SET_SEC_JR_LIODN_ENTRY(2, 133, 134), + SET_SEC_JR_LIODN_ENTRY(3, 135, 136), + SET_SEC_RTIC_LIODN_ENTRY(a, 89), + SET_SEC_RTIC_LIODN_ENTRY(b, 90), + SET_SEC_RTIC_LIODN_ENTRY(c, 91), + SET_SEC_RTIC_LIODN_ENTRY(d, 92), + SET_SEC_DECO_LIODN_ENTRY(0, 139, 140), + SET_SEC_DECO_LIODN_ENTRY(1, 141, 142), + SET_SEC_DECO_LIODN_ENTRY(2, 143, 144), + SET_SEC_DECO_LIODN_ENTRY(3, 145, 146), +}; +int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); + +#ifdef CONFIG_SYS_FSL_RAID_ENGINE +struct liodn_id_table raide_liodn_tbl[] = { + SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 0, 60), + SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 1, 61), + SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 0, 62), + SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 1, 63), +}; +int raide_liodn_tbl_sz = ARRAY_SIZE(raide_liodn_tbl); +#endif + +struct liodn_id_table liodn_bases[] = { + [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(64, 101), +#ifdef CONFIG_SYS_DPAA_FMAN + [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(32), +#endif +#if (CONFIG_SYS_NUM_FMAN == 2) + [FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(160), +#endif +#ifdef CONFIG_SYS_FSL_RAID_ENGINE + [FSL_HW_PORTAL_RAID_ENGINE] = SET_LIODN_BASE_1(49), +#endif +}; diff --git a/arch/powerpc/cpu/mpc85xx/p5040_serdes.c b/arch/powerpc/cpu/mpc85xx/p5040_serdes.c new file mode 100644 index 0000000..890b88e --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/p5040_serdes.c @@ -0,0 +1,117 @@ +/* + * Copyright 2009-2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_serdes.h> +#include <asm/processor.h> +#include <asm/io.h> +#include "fsl_corenet_serdes.h" + +/* + * Note: For P5040, the fourth SerDes bank (with two lanes) is on SerDes2, but + * U-boot only supports one SerDes controller. Therefore, we ignore bank 4 in + * this table. This works because most of the SerDes code is for errata + * work-arounds, and there are no P5040 errata that effect bank 4. + */ + +static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = { + [0x00] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, /* SATA1, SATA2, */ }, + [0x01] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, + SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, XAUI_FM1, XAUI_FM1, + XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM2, /* SATA1, SATA2 */ }, + [0x02] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SGMII_FM1_DTSEC3, + SGMII_FM1_DTSEC4, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, + XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, + XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ }, + [0x03] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SGMII_FM2_DTSEC1, + SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, + SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, + /* SATA1, SATA2 */ }, + [0x04] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE3, SGMII_FM2_DTSEC1, + SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, + SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, + /* SATA1, SATA2 */ }, + [0x05] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE3, SGMII_FM1_DTSEC3, + SGMII_FM1_DTSEC4, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, + XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, + XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ }, + [0x06] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ }, + [0x07] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, + SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, XAUI_FM1, XAUI_FM1, + XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM2, /* SATA1, SATA2 */ }, + [0x11] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, + AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, NONE, NONE, SATA1, SATA2, + /* NONE, NONE */ }, + [0x15] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, + AURORA, AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, + NONE, NONE, SATA1, SATA2, /* NONE, NONE */ }, + [0x2a] = {PCIE1, PCIE1, PCIE3, PCIE3, PCIE2, PCIE2, PCIE2, PCIE2, + AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2, + XAUI_FM2, XAUI_FM2, /* NONE, NONE */ }, + [0x34] = {PCIE1, PCIE1, PCIE1, PCIE1, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, + AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, + NONE, SATA1, SATA2, /* NONE, NONE */ }, + [0x35] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, AURORA, XAUI_FM1, + XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, NONE, SATA1, SATA2, + /* NONE, NONE */ }, + [0x36] = {PCIE1, PCIE1, PCIE3, PCIE3, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, + AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, + NONE, SATA1, SATA2, /* NONE, NONE */ }, +}; + +enum srds_prtcl serdes_get_prtcl(int cfg, int lane) +{ + if (!serdes_lane_enabled(lane)) + return NONE; + + return serdes_cfg_tbl[cfg][lane]; +} + +int is_serdes_prtcl_valid(u32 prtcl) +{ + int i; + + if (prtcl > ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (serdes_cfg_tbl[prtcl][i] != NONE) + return 1; + } + + return 0; +} diff --git a/arch/powerpc/cpu/mpc85xx/portals.c b/arch/powerpc/cpu/mpc85xx/portals.c index 6199633..b59ef69 100644 --- a/arch/powerpc/cpu/mpc85xx/portals.c +++ b/arch/powerpc/cpu/mpc85xx/portals.c @@ -182,14 +182,18 @@ void fdt_fixup_qportals(void *blob) { int off, err; unsigned int maj, min; + unsigned int ip_cfg; u32 rev_1 = in_be32(&qman->ip_rev_1); + u32 rev_2 = in_be32(&qman->ip_rev_2); char compat[64]; int compat_len; maj = (rev_1 >> 8) & 0xff; min = rev_1 & 0xff; + ip_cfg = rev_2 & 0xff; - compat_len = sprintf(compat, "fsl,qman-portal-%u.%u", maj, min) + 1; + compat_len = sprintf(compat, "fsl,qman-portal-%u.%u.%u", + maj, min, ip_cfg) + 1; compat_len += sprintf(compat + compat_len, "fsl,qman-portal") + 1; off = fdt_node_offset_by_compatible(blob, -1, "fsl,qman-portal"); @@ -267,14 +271,19 @@ void fdt_fixup_bportals(void *blob) { int off, err; unsigned int maj, min; + unsigned int ip_cfg; u32 rev_1 = in_be32(&bman->ip_rev_1); + u32 rev_2 = in_be32(&bman->ip_rev_2); char compat[64]; int compat_len; maj = (rev_1 >> 8) & 0xff; min = rev_1 & 0xff; - compat_len = sprintf(compat, "fsl,bman-portal-%u.%u", maj, min) + 1; + ip_cfg = rev_2 & 0xff; + + compat_len = sprintf(compat, "fsl,bman-portal-%u.%u.%u", + maj, min, ip_cfg) + 1; compat_len += sprintf(compat + compat_len, "fsl,bman-portal") + 1; off = fdt_node_offset_by_compatible(blob, -1, "fsl,bman-portal"); diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S index 22e73e0..4ba44a9 100644 --- a/arch/powerpc/cpu/mpc85xx/release.S +++ b/arch/powerpc/cpu/mpc85xx/release.S @@ -150,29 +150,33 @@ __secondary_start_page: #define toreset(x) (x - __secondary_start_page + 0xfffff000) /* get our PIR to figure out our table entry */ - lis r3,toreset(__spin_table)@h - ori r3,r3,toreset(__spin_table)@l + lis r3,toreset(__spin_table_addr)@h + ori r3,r3,toreset(__spin_table_addr)@l + lwz r3,0(r3) - /* r10 has the base address for the entry */ + /* + * r10 has the base address for the entry. + * we cannot access it yet before setting up a new TLB + */ mfspr r0,SPRN_PIR #if defined(CONFIG_E6500) /* * PIR definition for E6500 * 0-17 Reserved (logic 0s) - * 8-19 CHIP_ID, 2’b00 - SoC 1 + * 8-19 CHIP_ID, 2'b00 - SoC 1 * all others - reserved - * 20-24 CLUSTER_ID 5’b00000 - CCM 1 + * 20-24 CLUSTER_ID 5'b00000 - CCM 1 * all others - reserved - * 25-26 CORE_CLUSTER_ID 2’b00 - cluster 1 - * 2’b01 - cluster 2 - * 2’b10 - cluster 3 - * 2’b11 - cluster 4 - * 27-28 CORE_ID 2’b00 - core 0 - * 2’b01 - core 1 - * 2’b10 - core 2 - * 2’b11 - core 3 - * 29-31 THREAD_ID 3’b000 - thread 0 - * 3’b001 - thread 1 + * 25-26 CORE_CLUSTER_ID 2'b00 - cluster 1 + * 2'b01 - cluster 2 + * 2'b10 - cluster 3 + * 2'b11 - cluster 4 + * 27-28 CORE_ID 2'b00 - core 0 + * 2'b01 - core 1 + * 2'b10 - core 2 + * 2'b11 - core 3 + * 29-31 THREAD_ID 3'b000 - thread 0 + * 3'b001 - thread 1 */ rlwinm r4,r0,29,25,31 #elif defined(CONFIG_E500MC) @@ -180,16 +184,9 @@ __secondary_start_page: #else mr r4,r0 #endif - slwi r8,r4,5 + slwi r8,r4,6 /* spin table is padded to 64 byte */ add r10,r3,r8 -#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING) - /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */ - slwi r8,r4,1 - addi r8,r8,32 - mtspr L1CSR2,r8 -#endif - #ifdef CONFIG_E6500 mfspr r0,SPRN_PIR /* @@ -209,6 +206,13 @@ __secondary_start_page: mtspr SPRN_PIR,r4 /* write to PIR register */ +#ifdef CONFIG_SYS_CACHE_STASHING + /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */ + slwi r8,r4,1 + addi r8,r8,32 + mtspr L1CSR2,r8 +#endif + #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \ defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011) /* @@ -277,73 +281,111 @@ __secondary_start_page: beq 2b #endif 3: - -#define EPAPR_MAGIC (0x45504150) -#define ENTRY_ADDR_UPPER 0 -#define ENTRY_ADDR_LOWER 4 -#define ENTRY_R3_UPPER 8 -#define ENTRY_R3_LOWER 12 -#define ENTRY_RESV 16 -#define ENTRY_PIR 20 -#define ENTRY_R6_UPPER 24 -#define ENTRY_R6_LOWER 28 -#define ENTRY_SIZE 32 - - /* setup the entry */ - li r3,0 - li r8,1 - stw r4,ENTRY_PIR(r10) - stw r3,ENTRY_ADDR_UPPER(r10) - stw r8,ENTRY_ADDR_LOWER(r10) - stw r3,ENTRY_R3_UPPER(r10) - stw r4,ENTRY_R3_LOWER(r10) - stw r3,ENTRY_R6_UPPER(r10) - stw r3,ENTRY_R6_LOWER(r10) - - /* load r13 with the address of the 'bootpg' in SDRAM */ - lis r13,toreset(__bootpg_addr)@h - ori r13,r13,toreset(__bootpg_addr)@l + /* setup mapping for the spin table, WIMGE=0b00100 */ + lis r13,toreset(__spin_table_addr)@h + ori r13,r13,toreset(__spin_table_addr)@l lwz r13,0(r13) + /* mask by 4K */ + rlwinm r13,r13,0,0,19 - /* setup mapping for AS = 1, and jump there */ lis r11,(MAS0_TLBSEL(1)|MAS0_ESEL(1))@h mtspr SPRN_MAS0,r11 lis r11,(MAS1_VALID|MAS1_IPROT)@h ori r11,r11,(MAS1_TS|MAS1_TSIZE(BOOKE_PAGESZ_4K))@l mtspr SPRN_MAS1,r11 - oris r11,r13,(MAS2_I|MAS2_G)@h - ori r11,r13,(MAS2_I|MAS2_G)@l + oris r11,r13,(MAS2_M|MAS2_G)@h + ori r11,r13,(MAS2_M|MAS2_G)@l mtspr SPRN_MAS2,r11 oris r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@h ori r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@l mtspr SPRN_MAS3,r11 + li r11,0 + mtspr SPRN_MAS7,r11 tlbwe - bl 1f -1: mflr r11 /* - * OR in 0xfff to create a mask of the bootpg SDRAM address. We use - * this mask to fixup the cpu spin table and the address that we want - * to jump to, eg change them from 0xfffffxxx to 0x7ffffxxx if the - * bootpg is at 0x7ffff000 in SDRAM. + * __bootpg_addr has the address of __second_half_boot_page + * jump there in AS=1 space with cache enabled */ - ori r13,r13,0xfff - and r11, r11, r13 - and r10, r10, r13 - - addi r11,r11,(2f-1b) + lis r13,toreset(__bootpg_addr)@h + ori r13,r13,toreset(__bootpg_addr)@l + lwz r11,0(r13) + mtspr SPRN_SRR0,r11 mfmsr r13 ori r12,r13,MSR_IS|MSR_DS@l - - mtspr SPRN_SRR0,r11 mtspr SPRN_SRR1,r12 rfi + /* + * Allocate some space for the SDRAM address of the bootpg. + * This variable has to be in the boot page so that it can + * be accessed by secondary cores when they come out of reset. + */ + .align L1_CACHE_SHIFT + .globl __bootpg_addr +__bootpg_addr: + .long 0 + + .global __spin_table_addr +__spin_table_addr: + .long 0 + + /* + * This variable is set by cpu_init_r() after parsing hwconfig + * to enable workaround for erratum NMG_CPU_A011. + */ + .align L1_CACHE_SHIFT + .global enable_cpu_a011_workaround +enable_cpu_a011_workaround: + .long 1 + + /* Fill in the empty space. The actual reset vector is + * the last word of the page */ +__secondary_start_code_end: + .space 4092 - (__secondary_start_code_end - __secondary_start_page) +__secondary_reset_vector: + b __secondary_start_page + + +/* this is a separated page for the spin table and cacheable boot code */ + .align L1_CACHE_SHIFT + .global __second_half_boot_page +__second_half_boot_page: +#define EPAPR_MAGIC 0x45504150 +#define ENTRY_ADDR_UPPER 0 +#define ENTRY_ADDR_LOWER 4 +#define ENTRY_R3_UPPER 8 +#define ENTRY_R3_LOWER 12 +#define ENTRY_RESV 16 +#define ENTRY_PIR 20 +#define ENTRY_SIZE 64 + /* + * setup the entry + * r10 has the base address of the spin table. + * spin table is defined as + * struct { + * uint64_t entry_addr; + * uint64_t r3; + * uint32_t rsvd1; + * uint32_t pir; + * }; + * we pad this struct to 64 bytes so each entry is in its own cacheline + */ + li r3,0 + li r8,1 + mfspr r4,SPRN_PIR + stw r3,ENTRY_ADDR_UPPER(r10) + stw r3,ENTRY_R3_UPPER(r10) + stw r4,ENTRY_R3_LOWER(r10) + stw r3,ENTRY_RESV(r10) + stw r4,ENTRY_PIR(r10) + msync + stw r8,ENTRY_ADDR_LOWER(r10) + /* spin waiting for addr */ -2: - lwz r4,ENTRY_ADDR_LOWER(r10) +3: lwz r4,ENTRY_ADDR_LOWER(r10) andi. r11,r4,1 - bne 2b + bne 3b isync /* setup IVORs to match fixed offsets */ @@ -362,11 +404,20 @@ __secondary_start_page: /* mask by ~64M to setup our tlb we will jump to */ rlwinm r12,r4,0,0,5 - /* setup r3, r4, r5, r6, r7, r8, r9 */ + /* + * setup r3, r4, r5, r6, r7, r8, r9 + * r3 contains the value to put in the r3 register at secondary cpu + * entry. The high 32-bits are ignored on 32-bit chip implementations. + * 64-bit chip implementations however shall load all 64-bits + */ +#ifdef CONFIG_SYS_PPC64 + ld r3,ENTRY_R3_UPPER(r10) +#else lwz r3,ENTRY_R3_LOWER(r10) +#endif li r4,0 li r5,0 - lwz r6,ENTRY_R6_LOWER(r10) + li r6,0 lis r7,(64*1024*1024)@h li r8,0 li r9,0 @@ -404,32 +455,10 @@ __secondary_start_page: mtspr SPRN_SRR1,r13 rfi - /* - * Allocate some space for the SDRAM address of the bootpg. - * This variable has to be in the boot page so that it can - * be accessed by secondary cores when they come out of reset. - */ - .globl __bootpg_addr -__bootpg_addr: - .long 0 - .align L1_CACHE_SHIFT + .align 6 .globl __spin_table __spin_table: .space CONFIG_MAX_CPUS*ENTRY_SIZE - - /* - * This variable is set by cpu_init_r() after parsing hwconfig - * to enable workaround for erratum NMG_CPU_A011. - */ - .align L1_CACHE_SHIFT - .global enable_cpu_a011_workaround -enable_cpu_a011_workaround: - .long 1 - - /* Fill in the empty space. The actual reset vector is - * the last word of the page */ -__secondary_start_code_end: - .space 4092 - (__secondary_start_code_end - __secondary_start_page) -__secondary_reset_vector: - b __secondary_start_page +__spin_table_end: + .space 4096 - (__spin_table_end - __spin_table) diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index abfeb26..801ee07 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -39,6 +39,10 @@ DECLARE_GLOBAL_DATA_PTR; void get_sys_info (sys_info_t * sysInfo) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); +#ifdef CONFIG_FSL_IFC + struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR; + u32 ccr; +#endif #ifdef CONFIG_FSL_CORENET volatile ccsr_clk_t *clk = (void *)(CONFIG_SYS_FSL_CORENET_CLK_ADDR); unsigned int cpu; @@ -72,16 +76,22 @@ void get_sys_info (sys_info_t * sysInfo) [13] = 2, /* CC4 PPL / 2 */ [14] = 4, /* CC4 PPL / 4 */ }; - uint lcrr_div, i, freqCC_PLL[4], rcw_tmp; - uint ratio[4]; + uint i, freqCC_PLL[6], rcw_tmp; + uint ratio[6]; unsigned long sysclk = CONFIG_SYS_CLK_FREQ; uint mem_pll_rat; sysInfo->freqSystemBus = sysclk; +#ifdef CONFIG_DDR_CLK_FREQ + sysInfo->freqDDRBus = CONFIG_DDR_CLK_FREQ; +#else sysInfo->freqDDRBus = sysclk; +#endif sysInfo->freqSystemBus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f; - mem_pll_rat = (in_be32(&gur->rcwsr[0]) >> 17) & 0x1f; + mem_pll_rat = (in_be32(&gur->rcwsr[0]) >> + FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT) + & FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK; if (mem_pll_rat > 2) sysInfo->freqDDRBus *= mem_pll_rat; else @@ -91,27 +101,151 @@ void get_sys_info (sys_info_t * sysInfo) ratio[1] = (in_be32(&clk->pllc2gsr) >> 1) & 0x3f; ratio[2] = (in_be32(&clk->pllc3gsr) >> 1) & 0x3f; ratio[3] = (in_be32(&clk->pllc4gsr) >> 1) & 0x3f; - for (i = 0; i < 4; i++) { + ratio[4] = (in_be32(&clk->pllc5gsr) >> 1) & 0x3f; + ratio[5] = (in_be32(&clk->pllc6gsr) >> 1) & 0x3f; + for (i = 0; i < 6; i++) { if (ratio[i] > 4) freqCC_PLL[i] = sysclk * ratio[i]; else freqCC_PLL[i] = sysInfo->freqSystemBus * ratio[i]; } - rcw_tmp = in_be32(&gur->rcwsr[3]); +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + /* + * Each cluster has up to 4 cores, sharing the same PLL selection. + * The cluster assignment is fixed per SoC. There is no way identify the + * assignment so far, presuming the "first configuration" which is to + * fill the lower cluster group first before moving up to next group. + * PLL1, PLL2, PLL3 are cluster group A, feeding core 0~3 on cluster 1 + * and core 4~7 on cluster 2 + * PLL4, PLL5, PLL6 are cluster group B, feeding core 8~11 on cluster 3 + * and core 12~15 on cluster 4 if existing + */ for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) { - u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf; + u32 c_pll_sel = (in_be32(&clk->clkc0csr + (cpu / 4) * 8) >> 27) + & 0xf; u32 cplx_pll = core_cplx_PLL[c_pll_sel]; + if (cplx_pll > 3) + printf("Unsupported architecture configuration" + " in function %s\n", __func__); + cplx_pll += (cpu / 8) * 3; sysInfo->freqProcessor[cpu] = freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel]; } +#define PME_CLK_SEL 0xe0000000 +#define PME_CLK_SHIFT 29 +#define FM1_CLK_SEL 0x1c000000 +#define FM1_CLK_SHIFT 26 + rcw_tmp = in_be32(&gur->rcwsr[7]); + +#ifdef CONFIG_SYS_DPAA_PME + switch ((rcw_tmp & PME_CLK_SEL) >> PME_CLK_SHIFT) { + case 1: + sysInfo->freqPME = freqCC_PLL[0]; + break; + case 2: + sysInfo->freqPME = freqCC_PLL[0] / 2; + break; + case 3: + sysInfo->freqPME = freqCC_PLL[0] / 3; + break; + case 4: + sysInfo->freqPME = freqCC_PLL[0] / 4; + break; + case 6: + sysInfo->freqPME = freqCC_PLL[1] / 2; + break; + case 7: + sysInfo->freqPME = freqCC_PLL[1] / 3; + break; + default: + printf("Error: Unknown PME clock select!\n"); + case 0: + sysInfo->freqPME = sysInfo->freqSystemBus / 2; + break; + } +#endif + +#ifdef CONFIG_SYS_DPAA_QBMAN + sysInfo->freqQMAN = sysInfo->freqSystemBus / 2; +#endif + +#ifdef CONFIG_SYS_DPAA_FMAN + switch ((rcw_tmp & FM1_CLK_SEL) >> FM1_CLK_SHIFT) { + case 1: + sysInfo->freqFMan[0] = freqCC_PLL[3]; + break; + case 2: + sysInfo->freqFMan[0] = freqCC_PLL[3] / 2; + break; + case 3: + sysInfo->freqFMan[0] = freqCC_PLL[3] / 3; + break; + case 4: + sysInfo->freqFMan[0] = freqCC_PLL[3] / 4; + break; + case 6: + sysInfo->freqFMan[0] = freqCC_PLL[4] / 2; + break; + case 7: + sysInfo->freqFMan[0] = freqCC_PLL[4] / 3; + break; + default: + printf("Error: Unknown FMan1 clock select!\n"); + case 0: + sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2; + break; + } +#if (CONFIG_SYS_NUM_FMAN) == 2 +#define FM2_CLK_SEL 0x00000038 +#define FM2_CLK_SHIFT 3 + rcw_tmp = in_be32(&gur->rcwsr[15]); + switch ((rcw_tmp & FM2_CLK_SEL) >> FM2_CLK_SHIFT) { + case 1: + sysInfo->freqFMan[1] = freqCC_PLL[4]; + break; + case 2: + sysInfo->freqFMan[1] = freqCC_PLL[4] / 2; + break; + case 3: + sysInfo->freqFMan[1] = freqCC_PLL[4] / 3; + break; + case 4: + sysInfo->freqFMan[1] = freqCC_PLL[4] / 4; + break; + case 6: + sysInfo->freqFMan[1] = freqCC_PLL[3] / 2; + break; + case 7: + sysInfo->freqFMan[1] = freqCC_PLL[3] / 3; + break; + default: + printf("Error: Unknown FMan2 clock select!\n"); + case 0: + sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2; + break; + } +#endif /* CONFIG_SYS_NUM_FMAN == 2 */ +#endif /* CONFIG_SYS_DPAA_FMAN */ + +#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ + + for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) { + u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf; + u32 cplx_pll = core_cplx_PLL[c_pll_sel]; + + sysInfo->freqProcessor[cpu] = + freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel]; + } #define PME_CLK_SEL 0x80000000 #define FM1_CLK_SEL 0x40000000 #define FM2_CLK_SEL 0x20000000 #define HWA_ASYNC_DIV 0x04000000 #if (CONFIG_SYS_FSL_NUM_CC_PLLS == 2) #define HWA_CC_PLL 1 +#elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 3) +#define HWA_CC_PLL 2 #elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 4) #define HWA_CC_PLL 2 #else @@ -151,11 +285,10 @@ void get_sys_info (sys_info_t * sysInfo) #endif #endif -#else - uint plat_ratio,e500_ratio,half_freqSystemBus; -#if defined(CONFIG_FSL_LBC) - uint lcrr_div; -#endif +#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ + +#else /* CONFIG_FSL_CORENET */ + uint plat_ratio, e500_ratio, half_freqSystemBus; int i; #ifdef CONFIG_QE __maybe_unused u32 qe_ratio; @@ -202,6 +335,7 @@ void get_sys_info (sys_info_t * sysInfo) #endif /* CONFIG_FSL_CORENET */ #if defined(CONFIG_FSL_LBC) + uint lcrr_div; #if defined(CONFIG_SYS_LBC_LCRR) /* We will program LCRR to this value later */ lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV; @@ -228,6 +362,13 @@ void get_sys_info (sys_info_t * sysInfo) sysInfo->freqLocalBus = lcrr_div; } #endif + +#if defined(CONFIG_FSL_IFC) + ccr = in_be32(&ifc_regs->ifc_ccr); + ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1; + + sysInfo->freqLocalBus = sysInfo->freqSystemBus / ccr; +#endif } diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 9e04257..ac17f9d 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -169,7 +169,7 @@ l2_disabled: * */ -#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING) +#ifdef CONFIG_SYS_CACHE_STASHING /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */ li r2,(32 + 0) mtspr L1CSR2,r2 @@ -211,6 +211,77 @@ l2_disabled: andi. r1,r3,L1CSR0_DCE@l beq 2b + .macro create_tlb1_entry esel ts tsize epn wimg rpn perm phy_high scratch + lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h + ori \scratch, \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@l + mtspr MAS0, \scratch + lis \scratch, FSL_BOOKE_MAS1(1, 1, 0, \ts, \tsize)@h + ori \scratch, \scratch, FSL_BOOKE_MAS1(1, 1, 0, \ts, \tsize)@l + mtspr MAS1, \scratch + lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h + ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l + mtspr MAS2, \scratch + lis \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@h + ori \scratch, \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@l + mtspr MAS3, \scratch + lis \scratch, \phy_high@h + ori \scratch, \scratch, \phy_high@l + mtspr MAS7, \scratch + isync + msync + tlbwe + isync + .endm + + .macro create_tlb0_entry esel ts tsize epn wimg rpn perm phy_high scratch + lis \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@h + ori \scratch, \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@l + mtspr MAS0, \scratch + lis \scratch, FSL_BOOKE_MAS1(1, 0, 0, \ts, \tsize)@h + ori \scratch, \scratch, FSL_BOOKE_MAS1(1, 0, 0, \ts, \tsize)@l + mtspr MAS1, \scratch + lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h + ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l + mtspr MAS2, \scratch + lis \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@h + ori \scratch, \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@l + mtspr MAS3, \scratch + lis \scratch, \phy_high@h + ori \scratch, \scratch, \phy_high@l + mtspr MAS7, \scratch + isync + msync + tlbwe + isync + .endm + + .macro delete_tlb1_entry esel scratch + lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h + ori \scratch, \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@l + mtspr MAS0, \scratch + li \scratch, 0 + mtspr MAS1, \scratch + isync + msync + tlbwe + isync + .endm + + .macro delete_tlb0_entry esel epn wimg scratch + lis \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@h + ori \scratch, \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@l + mtspr MAS0, \scratch + li \scratch, 0 + mtspr MAS1, \scratch + lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h + ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l + mtspr MAS2, \scratch + isync + msync + tlbwe + isync + .endm + #if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_NAND_SPL) /* * TLB entry for debuggging in AS1 @@ -220,61 +291,35 @@ l2_disabled: * in AS1. */ - lis r6,FSL_BOOKE_MAS0(1, - CONFIG_SYS_PPC_E500_DEBUG_TLB, 0)@h - ori r6,r6,FSL_BOOKE_MAS0(1, - CONFIG_SYS_PPC_E500_DEBUG_TLB, 0)@l - #if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT) /* * TLB entry is created for IVPR + IVOR15 to map on valid OP code address * bacause flash's virtual address maps to 0xff800000 - 0xffffffff. * and this window is outside of 4K boot window. */ - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_4M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_4M)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, - (MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, - (MAS2_I|MAS2_G))@l + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ + 0, BOOKE_PAGESZ_4M, \ + CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \ + 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 - /* The 85xx has the default boot window 0xff800000 - 0xffffffff */ - lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l #elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT) - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,(MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,(MAS2_I|MAS2_G))@l - - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@l + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ + 0, BOOKE_PAGESZ_1M, \ + CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \ + CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 #else /* * TLB entry is created for IVPR + IVOR15 to map on valid OP code address * because "nexti" will resize TLB to 4K */ - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, - (MAS2_I))@l - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@l + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ + 0, BOOKE_PAGESZ_256K, \ + CONFIG_SYS_MONITOR_BASE, MAS2_I, \ + CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 #endif - mtspr MAS0,r6 - mtspr MAS1,r7 - mtspr MAS2,r8 - mtspr MAS3,r9 - tlbwe - isync #endif /* @@ -392,27 +437,11 @@ l2_disabled: */ /* create a temp mapping TLB0[0] for LBCR */ - lis r6,FSL_BOOKE_MAS0(0, 0, 0)@h - ori r6,r6,FSL_BOOKE_MAS0(0, 0, 0)@l - - lis r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@l - - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@l - - mtspr MAS0,r6 - mtspr MAS1,r7 - mtspr MAS2,r8 - mtspr MAS3,r9 - isync - msync - tlbwe + create_tlb0_entry 0, \ + 0, BOOKE_PAGESZ_4K, \ + CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G, \ + CONFIG_SYS_LBC_ADDR, MAS3_SW|MAS3_SR, \ + 0, r6 /* Set LBCR register */ lis r4,CONFIG_SYS_LBCR_ADDR@h @@ -551,49 +580,22 @@ create_ccsr_new_tlb: ori r8, r8, CONFIG_SYS_CCSRBAR@l lis r9, (CONFIG_SYS_CCSRBAR + 0x1000)@h ori r9, r9, (CONFIG_SYS_CCSRBAR + 0x1000)@l - lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h - ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l - lis r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h - ori r1, r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l - lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h - ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l - lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@h - ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@l -#ifdef CONFIG_ENABLE_36BIT_PHYS - lis r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h - ori r7, r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l - mtspr MAS7, r7 -#endif - mtspr MAS0, r0 - mtspr MAS1, r1 - mtspr MAS2, r2 - mtspr MAS3, r3 - isync - msync - tlbwe - + create_tlb0_entry 0, \ + 0, BOOKE_PAGESZ_4K, \ + CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, \ + CONFIG_SYS_CCSRBAR_PHYS_LOW, MAS3_SW|MAS3_SR, \ + CONFIG_SYS_CCSRBAR_PHYS_HIGH, r3 /* * Create a TLB for the current location of CCSR. Register R9 is reserved * for the virtual address of this TLB (CONFIG_SYS_CCSRBAR + 0x1000). */ create_ccsr_old_tlb: - lis r0, FSL_BOOKE_MAS0(0, 1, 0)@h - ori r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l - lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h - ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l - lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@h - ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@l -#ifdef CONFIG_ENABLE_36BIT_PHYS - li r7, 0 /* The default CCSR address is always a 32-bit number */ - mtspr MAS7, r7 -#endif - mtspr MAS0, r0 - /* MAS1 is the same as above */ - mtspr MAS2, r2 - mtspr MAS3, r3 - isync - msync - tlbwe + create_tlb0_entry 1, \ + 0, BOOKE_PAGESZ_4K, \ + CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, \ + CONFIG_SYS_CCSRBAR_DEFAULT, MAS3_SW|MAS3_SR, \ + 0, r3 /* The default CCSR address is always a 32-bit number */ + /* * We have a TLB for what we think is the current (old) CCSR. Let's @@ -743,29 +745,46 @@ write_new_ccsrbar: /* Delete the temporary TLBs */ delete_temp_tlbs: - lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h - ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l - li r1, 0 - lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h - ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l - mtspr MAS0, r0 - mtspr MAS1, r1 - mtspr MAS2, r2 - isync - msync - tlbwe + delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, r3 + delete_tlb0_entry 1, CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, r3 - lis r0, FSL_BOOKE_MAS0(0, 1, 0)@h - ori r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l - lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h - ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l - mtspr MAS0, r0 - mtspr MAS2, r2 - isync - msync - tlbwe #endif /* #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) */ +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +create_ccsr_l2_tlb: + /* + * Create a TLB for the MMR location of CCSR + * to access L2CSR0 register + */ + create_tlb0_entry 0, \ + 0, BOOKE_PAGESZ_4K, \ + CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, \ + CONFIG_SYS_CCSRBAR_PHYS_LOW + 0xC20000, MAS3_SW|MAS3_SR, \ + CONFIG_SYS_CCSRBAR_PHYS_HIGH, r3 + +enable_l2_cluster_l2: + /* enable L2 cache */ + lis r3, (CONFIG_SYS_CCSRBAR + 0xC20000)@h + ori r3, r3, (CONFIG_SYS_CCSRBAR + 0xC20000)@l + li r4, 33 /* stash id */ + stw r4, 4(r3) + lis r4, (L2CSR0_L2FI|L2CSR0_L2LFC)@h + ori r4, r4, (L2CSR0_L2FI|L2CSR0_L2LFC)@l + sync + stw r4, 0(r3) /* invalidate L2 */ +1: sync + lwz r0, 0(r3) + twi 0, r0, 0 + isync + and. r1, r0, r4 + bne 1b + lis r4, L2CSR0_L2E@h + sync + stw r4, 0(r3) /* eanble L2 */ +delete_ccsr_l2_tlb: + delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, r3 +#endif + #ifdef CONFIG_SYS_FSL_ERRATUM_A004510 #define DCSR_LAWBARH0 (CONFIG_SYS_CCSRBAR + 0x1000) #define LAW_SIZE_1M 0x13 @@ -1019,83 +1038,50 @@ create_init_ram_area: #if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT) /* create a temp mapping in AS=1 to the 4M boot window */ - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l + create_tlb1_entry 15, \ + 1, BOOKE_PAGESZ_4M, \ + CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \ + 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, (MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, (MAS2_I|MAS2_G))@l - - /* The 85xx has the default boot window 0xff800000 - 0xffffffff */ - lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l #elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT) /* create a temp mapping in AS = 1 for Flash mapping * created by PBL for ISBC code */ - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@l - - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@l + create_tlb1_entry 15, \ + 1, BOOKE_PAGESZ_1M, \ + CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \ + CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 #else /* * create a temp mapping in AS=1 to the 1M CONFIG_SYS_MONITOR_BASE space, the main * image has been relocated to CONFIG_SYS_MONITOR_BASE on the second stage. */ - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@l - - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l + create_tlb1_entry 15, \ + 1, BOOKE_PAGESZ_1M, \ + CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \ + CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 #endif - mtspr MAS0,r6 - mtspr MAS1,r7 - mtspr MAS2,r8 - mtspr MAS3,r9 - isync - msync - tlbwe - /* create a temp mapping in AS=1 to the stack */ - lis r6,FSL_BOOKE_MAS0(1, 14, 0)@h - ori r6,r6,FSL_BOOKE_MAS0(1, 14, 0)@l - - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@l - #if defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) && \ defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH) - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@l - li r10,CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH - mtspr MAS7,r10 + create_tlb1_entry 14, \ + 1, BOOKE_PAGESZ_16K, \ + CONFIG_SYS_INIT_RAM_ADDR, 0, \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, MAS3_SX|MAS3_SW|MAS3_SR, \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH, r6 + #else - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l + create_tlb1_entry 14, \ + 1, BOOKE_PAGESZ_16K, \ + CONFIG_SYS_INIT_RAM_ADDR, 0, \ + CONFIG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 #endif - mtspr MAS0,r6 - mtspr MAS1,r7 - mtspr MAS2,r8 - mtspr MAS3,r9 - isync - msync - tlbwe - lis r6,MSR_IS|MSR_DS|MSR_DE@h ori r6,r6,MSR_IS|MSR_DS|MSR_DE@l lis r7,switch_as@h diff --git a/arch/powerpc/cpu/mpc85xx/t4240_ids.c b/arch/powerpc/cpu/mpc85xx/t4240_ids.c new file mode 100644 index 0000000..a8f16b1 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/t4240_ids.c @@ -0,0 +1,203 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> + +#ifdef CONFIG_SYS_DPAA_QBMAN +struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { + /* dqrr liodn, frame data liodn, liodn off, sdest */ + SET_QP_INFO(1, 27, 1, 0), + SET_QP_INFO(2, 28, 1, 0), + SET_QP_INFO(3, 29, 1, 1), + SET_QP_INFO(4, 30, 1, 1), + SET_QP_INFO(5, 31, 1, 2), + SET_QP_INFO(6, 32, 1, 2), + SET_QP_INFO(7, 33, 1, 3), + SET_QP_INFO(8, 34, 1, 3), + SET_QP_INFO(9, 35, 1, 4), + SET_QP_INFO(10, 36, 1, 4), + SET_QP_INFO(11, 37, 1, 5), + SET_QP_INFO(12, 38, 1, 5), + SET_QP_INFO(13, 39, 1, 6), + SET_QP_INFO(14, 40, 1, 6), + SET_QP_INFO(15, 41, 1, 7), + SET_QP_INFO(16, 42, 1, 7), + SET_QP_INFO(17, 43, 1, 8), + SET_QP_INFO(18, 44, 1, 8), + SET_QP_INFO(19, 45, 1, 9), + SET_QP_INFO(20, 46, 1, 9), + SET_QP_INFO(21, 47, 1, 10), + SET_QP_INFO(22, 48, 1, 10), + SET_QP_INFO(23, 49, 1, 11), + SET_QP_INFO(24, 50, 1, 11), + SET_QP_INFO(65, 89, 1, 0), + SET_QP_INFO(66, 90, 1, 0), + SET_QP_INFO(67, 91, 1, 1), + SET_QP_INFO(68, 92, 1, 1), + SET_QP_INFO(69, 93, 1, 2), + SET_QP_INFO(70, 94, 1, 2), + SET_QP_INFO(71, 95, 1, 3), + SET_QP_INFO(72, 96, 1, 3), + SET_QP_INFO(73, 97, 1, 4), + SET_QP_INFO(74, 98, 1, 4), + SET_QP_INFO(75, 99, 1, 5), + SET_QP_INFO(76, 100, 1, 5), + SET_QP_INFO(77, 101, 1, 6), + SET_QP_INFO(78, 102, 1, 6), + SET_QP_INFO(79, 103, 1, 7), + SET_QP_INFO(80, 104, 1, 7), + SET_QP_INFO(81, 105, 1, 8), + SET_QP_INFO(82, 106, 1, 8), + SET_QP_INFO(83, 107, 1, 9), + SET_QP_INFO(84, 108, 1, 9), + SET_QP_INFO(85, 109, 1, 10), + SET_QP_INFO(86, 110, 1, 10), + SET_QP_INFO(87, 111, 1, 11), + SET_QP_INFO(88, 112, 1, 11), + SET_QP_INFO(25, 51, 1, 0), + SET_QP_INFO(26, 52, 1, 0), +}; +#endif + +struct srio_liodn_id_table srio_liodn_tbl[] = { + SET_SRIO_LIODN_1(1, 307), + SET_SRIO_LIODN_1(2, 387), +}; +int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl); + +struct liodn_id_table liodn_tbl[] = { +#ifdef CONFIG_SYS_DPAA_QBMAN + SET_QMAN_LIODN(62), + SET_BMAN_LIODN(63), +#endif + + SET_SDHC_LIODN(1, 552), + + SET_PME_LIODN(117), + + SET_USB_LIODN(1, "fsl-usb2-mph", 553), + SET_USB_LIODN(2, "fsl-usb2-dr", 554), + + SET_SATA_LIODN(1, 555), + SET_SATA_LIODN(2, 556), + + SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148), + SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 228), + SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 308), + SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 388), + + SET_DMA_LIODN(1, 147), + SET_DMA_LIODN(2, 227), + + SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0), + SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0), + SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0), + SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0), + +#ifdef CONFIG_SYS_PMAN + SET_PMAN_LIODN(1, 513), + SET_PMAN_LIODN(2, 514), + SET_PMAN_LIODN(3, 515), +#endif + + /* SET_NEXUS_LIODN(557), -- not yet implemented */ +}; +int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_FMAN +struct liodn_id_table fman1_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(1, 0, 88), + SET_FMAN_RX_1G_LIODN(1, 1, 89), + SET_FMAN_RX_1G_LIODN(1, 2, 90), + SET_FMAN_RX_1G_LIODN(1, 3, 91), + SET_FMAN_RX_1G_LIODN(1, 4, 92), + SET_FMAN_RX_1G_LIODN(1, 5, 93), + SET_FMAN_RX_10G_LIODN(1, 0, 94), + SET_FMAN_RX_10G_LIODN(1, 1, 95), +}; +int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); +#if (CONFIG_SYS_NUM_FMAN == 2) +struct liodn_id_table fman2_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(2, 0, 88), + SET_FMAN_RX_1G_LIODN(2, 1, 89), + SET_FMAN_RX_1G_LIODN(2, 2, 90), + SET_FMAN_RX_1G_LIODN(2, 3, 91), + SET_FMAN_RX_1G_LIODN(2, 4, 92), + SET_FMAN_RX_1G_LIODN(2, 5, 93), + SET_FMAN_RX_10G_LIODN(2, 0, 94), + SET_FMAN_RX_10G_LIODN(2, 1, 95), +}; +int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl); +#endif +#endif + +struct liodn_id_table sec_liodn_tbl[] = { + SET_SEC_JR_LIODN_ENTRY(0, 454, 458), + SET_SEC_JR_LIODN_ENTRY(1, 455, 459), + SET_SEC_JR_LIODN_ENTRY(2, 456, 460), + SET_SEC_JR_LIODN_ENTRY(3, 457, 461), + SET_SEC_RTIC_LIODN_ENTRY(a, 453), + SET_SEC_RTIC_LIODN_ENTRY(b, 549), + SET_SEC_RTIC_LIODN_ENTRY(c, 550), + SET_SEC_RTIC_LIODN_ENTRY(d, 551), + SET_SEC_DECO_LIODN_ENTRY(0, 541, 610), + SET_SEC_DECO_LIODN_ENTRY(1, 542, 611), + SET_SEC_DECO_LIODN_ENTRY(2, 543, 612), + SET_SEC_DECO_LIODN_ENTRY(3, 544, 613), + SET_SEC_DECO_LIODN_ENTRY(4, 545, 614), + SET_SEC_DECO_LIODN_ENTRY(5, 546, 615), + SET_SEC_DECO_LIODN_ENTRY(6, 547, 616), + SET_SEC_DECO_LIODN_ENTRY(7, 548, 617), +}; +int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_RMAN +struct liodn_id_table rman_liodn_tbl[] = { + /* Set RMan block 0-3 liodn offset */ + SET_RMAN_LIODN(0, 678), + SET_RMAN_LIODN(1, 679), + SET_RMAN_LIODN(2, 680), + SET_RMAN_LIODN(3, 681), +}; +int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl); +#endif + +struct liodn_id_table liodn_bases[] = { +#ifdef CONFIG_SYS_DPAA_DCE + [FSL_HW_PORTAL_DCE] = SET_LIODN_BASE_2(618, 694), +#endif + [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558), +#ifdef CONFIG_SYS_DPAA_FMAN + [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973), +#if (CONFIG_SYS_NUM_FMAN == 2) + [FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(1069), +#endif +#endif +#ifdef CONFIG_SYS_DPAA_PME + [FSL_HW_PORTAL_PME] = SET_LIODN_BASE_2(770, 846), +#endif +#ifdef CONFIG_SYS_DPAA_RMAN + [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922), +#endif +}; diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c new file mode 100644 index 0000000..102defa --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c @@ -0,0 +1,237 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_serdes.h> +#include <asm/processor.h> +#include <asm/io.h> +#include "fsl_corenet2_serdes.h" + +struct serdes_config { + u32 protocol; + u8 lanes[SRDS_MAX_LANES]; +}; + +static struct serdes_config serdes1_cfg_tbl[] = { + /* SerDes 1 */ + {1, {XAUI_FM1_MAC9, XAUI_FM1_MAC9, + XAUI_FM1_MAC9, XAUI_FM1_MAC9, + XAUI_FM1_MAC10, XAUI_FM1_MAC10, + XAUI_FM1_MAC10, XAUI_FM1_MAC10}}, + {2, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC10, HIGIG_FM1_MAC10, + HIGIG_FM1_MAC10, HIGIG_FM1_MAC10}}, + {4, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC10, HIGIG_FM1_MAC10, + HIGIG_FM1_MAC10, HIGIG_FM1_MAC10}}, + {28, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4}}, + {36, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4}}, + {38, {NONE, NONE, QSGMII_FM1_B, NONE, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {40, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {46, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {48, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {} +}; +static struct serdes_config serdes2_cfg_tbl[] = { + /* SerDes 2 */ + {1, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC10, XAUI_FM2_MAC10, + XAUI_FM2_MAC10, XAUI_FM2_MAC10}}, + {2, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC10, HIGIG_FM2_MAC10, + HIGIG_FM2_MAC10, HIGIG_FM2_MAC10}}, + {4, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC10, HIGIG_FM2_MAC10, + HIGIG_FM2_MAC10, HIGIG_FM2_MAC10}}, + {7, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {13, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {14, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {16, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {22, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {23, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {25, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {26, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {28, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {36, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {38, {NONE, NONE, QSGMII_FM2_B, NONE, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {40, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {46, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {48, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {50, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {52, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {54, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {56, {XFI_FM1_MAC9, XFI_FM1_MAC10, + XFI_FM2_MAC10, XFI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {57, {XFI_FM1_MAC9, XFI_FM1_MAC10, + XFI_FM2_MAC10, XFI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {} +}; +static struct serdes_config serdes3_cfg_tbl[] = { + /* SerDes 3 */ + {2, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1}}, + {4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2}}, + {6, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1}}, + {8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE}}, + {9, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN}}, + {10, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN}}, + {12, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + PCIE2, PCIE2, PCIE2, PCIE2}}, + {14, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + PCIE2, PCIE2, PCIE2, PCIE2}}, + {16, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {17, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {19, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {20, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {} +}; +static struct serdes_config serdes4_cfg_tbl[] = { + /* SerDes 4 */ + {2, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3}}, + {4, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4}}, + {6, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}}, + {8, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}}, + {10, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA1}}, + {12, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SATA1, SATA1}}, + {14, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}}, + {16, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}}, + {18, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, AURORA, AURORA}}, + {} +}; +static struct serdes_config *serdes_cfg_tbl[] = { + serdes1_cfg_tbl, + serdes2_cfg_tbl, + serdes3_cfg_tbl, + serdes4_cfg_tbl, +}; + +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) +{ + struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->protocol) { + if (ptr->protocol == cfg) + return ptr->lanes[lane]; + ptr++; + } + return 0; +} + +int is_serdes_prtcl_valid(int serdes, u32 prtcl) +{ + int i; + struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->protocol) { + if (ptr->protocol == prtcl) + break; + ptr++; + } + + if (!ptr->protocol) + return 0; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (ptr->lanes[i] != NONE) + return 1; + } + + return 0; +} diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c index 929f6a6..a548dec 100644 --- a/arch/powerpc/cpu/mpc85xx/tlb.c +++ b/arch/powerpc/cpu/mpc85xx/tlb.c @@ -249,7 +249,7 @@ setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg) { int i; unsigned int tlb_size; - unsigned int wimge = 0; + unsigned int wimge = MAS2_M; unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE; unsigned int max_cam; u64 size, memsize = (u64)memsize_in_meg << 20; diff --git a/arch/powerpc/cpu/mpc86xx/fdt.c b/arch/powerpc/cpu/mpc86xx/fdt.c index 61f5110..2f955fe 100644 --- a/arch/powerpc/cpu/mpc86xx/fdt.c +++ b/arch/powerpc/cpu/mpc86xx/fdt.c @@ -20,7 +20,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) { #ifdef CONFIG_MP int off; - u32 bootpg = determine_mp_bootpg(); + u32 bootpg = determine_mp_bootpg(NULL); #endif do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, diff --git a/arch/powerpc/cpu/mpc86xx/mp.c b/arch/powerpc/cpu/mpc86xx/mp.c index 30c99eb..de705f0 100644 --- a/arch/powerpc/cpu/mpc86xx/mp.c +++ b/arch/powerpc/cpu/mpc86xx/mp.c @@ -90,8 +90,11 @@ int cpu_release(int nr, int argc, char * const argv[]) return 1; } -u32 determine_mp_bootpg(void) +u32 determine_mp_bootpg(unsigned int *pagesize) { + if (pagesize) + *pagesize = 4096; + /* if we have 4G or more of memory, put the boot page at 4Gb-1M */ if ((u64)gd->ram_size > 0xfffff000) return (0xfff00000); @@ -101,7 +104,7 @@ u32 determine_mp_bootpg(void) void cpu_mp_lmb_reserve(struct lmb *lmb) { - u32 bootpg = determine_mp_bootpg(); + u32 bootpg = determine_mp_bootpg(NULL); /* tell u-boot we stole a page */ lmb_reserve(lmb, bootpg, 4096); @@ -115,7 +118,7 @@ void setup_mp(void) { extern ulong __secondary_start_page; ulong fixup = (ulong)&__secondary_start_page; - u32 bootpg = determine_mp_bootpg(); + u32 bootpg = determine_mp_bootpg(NULL); u32 bootpg_va; if (bootpg >= CONFIG_SYS_MAX_DDR_BAT_SIZE) { diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index 78a8f92..2c487ca 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -73,6 +73,17 @@ struct cpu_type cpu_type_list [] = { CPU_TYPE_ENTRY(P4080, P4080, 8), CPU_TYPE_ENTRY(P5010, P5010, 1), CPU_TYPE_ENTRY(P5020, P5020, 2), + CPU_TYPE_ENTRY(P5021, P5021, 2), + CPU_TYPE_ENTRY(P5040, P5040, 4), + CPU_TYPE_ENTRY(T4240, T4240, 0), + CPU_TYPE_ENTRY(T4120, T4120, 0), + CPU_TYPE_ENTRY(B4860, B4860, 0), + CPU_TYPE_ENTRY(G4860, G4860, 0), + CPU_TYPE_ENTRY(G4060, G4060, 0), + CPU_TYPE_ENTRY(B4440, B4440, 0), + CPU_TYPE_ENTRY(G4440, G4440, 0), + CPU_TYPE_ENTRY(B4420, B4420, 0), + CPU_TYPE_ENTRY(B4220, B4220, 0), CPU_TYPE_ENTRY(BSC9130, 9130, 1), CPU_TYPE_ENTRY(BSC9131, 9131, 1), #elif defined(CONFIG_MPC86xx) diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c index 2592873..5928eb8 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -229,6 +229,26 @@ static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr) /* -3E = 667 CL5, -25 = CL6 800, -25E = CL5 800 */ #if !defined(CONFIG_FSL_DDR1) +static inline int avoid_odt_overlap(const dimm_params_t *dimm_params) +{ +#if CONFIG_DIMM_SLOTS_PER_CTLR == 1 + if (dimm_params[0].n_ranks == 4) + return 1; +#endif + +#if CONFIG_DIMM_SLOTS_PER_CTLR == 2 + if ((dimm_params[0].n_ranks == 2) && + (dimm_params[1].n_ranks == 2)) + return 1; + +#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE + if (dimm_params[0].n_ranks == 4) + return 1; +#endif +#endif + return 0; +} + /* * DDR SDRAM Timing Configuration 0 (TIMING_CFG_0) * @@ -236,7 +256,8 @@ static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr) * dreams up non-zero default values to be backwards compatible. */ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, - const memctl_options_t *popts) + const memctl_options_t *popts, + const dimm_params_t *dimm_params) { unsigned char trwt_mclk = 0; /* Read-to-write turnaround */ unsigned char twrt_mclk = 0; /* Write-to-read turnaround */ @@ -266,7 +287,18 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, unsigned int data_rate = get_ddr_freq(0); tmrd_mclk = 4; /* set the turnaround time */ - trwt_mclk = 1; + + /* + * for single quad-rank DIMM and two dual-rank DIMMs + * to avoid ODT overlap + */ + if (avoid_odt_overlap(dimm_params)) { + twwt_mclk = 2; + trrt_mclk = 1; + } + /* for faster clock, need more time for data setup */ + trwt_mclk = (data_rate/1000000 > 1800) ? 2 : 1; + if ((data_rate/1000000 > 1150) || (popts->memctl_interleaving)) twrt_mclk = 1; @@ -451,8 +483,8 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, | ((caslat_ctrl & 0xF) << 16) | ((refrec_ctrl & 0xF) << 12) | ((wrrec_mclk & 0x0F) << 8) - | ((acttoact_mclk & 0x07) << 4) - | ((wrtord_mclk & 0x07) << 0) + | ((acttoact_mclk & 0x0F) << 4) + | ((wrtord_mclk & 0x0F) << 0) ); debug("FSLDDR: timing_cfg_1 = 0x%08x\n", ddr->timing_cfg_1); } @@ -659,6 +691,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, unsigned int dqs_cfg; /* DQS configuration */ unsigned int odt_cfg = 0; /* ODT configuration */ unsigned int num_pr; /* Number of posted refreshes */ + unsigned int slow = 0; /* DDR will be run less than 1250 */ unsigned int obc_cfg; /* On-The-Fly Burst Chop Cfg */ unsigned int ap_en; /* Address Parity Enable */ unsigned int d_init; /* DRAM data initialization */ @@ -692,6 +725,10 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, obc_cfg = 0; #endif +#if (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7) + slow = get_ddr_freq(0) < 1249000000; +#endif + if (popts->registered_dimm_en) { rcw_en = 1; ap_en = popts->ap_en; @@ -720,6 +757,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, | ((dqs_cfg & 0x3) << 26) | ((odt_cfg & 0x3) << 21) | ((num_pr & 0xf) << 12) + | ((slow & 1) << 11) | (qd_en << 9) | (unq_mrs_en << 8) | ((obc_cfg & 0x1) << 6) @@ -1347,6 +1385,11 @@ static void set_ddr_wrlvl_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int wrlvl_en, | ((wrlvl_start & 0x1F) << 0) ); debug("FSLDDR: wrlvl_cntl = 0x%08x\n", ddr->ddr_wrlvl_cntl); + ddr->ddr_wrlvl_cntl_2 = popts->wrlvl_ctl_2; + debug("FSLDDR: wrlvl_cntl_2 = 0x%08x\n", ddr->ddr_wrlvl_cntl_2); + ddr->ddr_wrlvl_cntl_3 = popts->wrlvl_ctl_3; + debug("FSLDDR: wrlvl_cntl_3 = 0x%08x\n", ddr->ddr_wrlvl_cntl_3); + } /* DDR Self Refresh Counter (DDR_SR_CNTR) */ @@ -1370,6 +1413,12 @@ static void set_ddr_cdr1(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts) debug("FSLDDR: ddr_cdr1 = 0x%08x\n", ddr->ddr_cdr1); } +static void set_ddr_cdr2(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts) +{ + ddr->ddr_cdr2 = popts->ddr_cdr2; + debug("FSLDDR: ddr_cdr2 = 0x%08x\n", ddr->ddr_cdr2); +} + unsigned int check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr) { @@ -1466,7 +1515,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, break; } sa = common_dimm->base_address; - ea = common_dimm->total_mem - 1; + ea = sa + common_dimm->total_mem - 1; } else if (!popts->memctl_interleaving) { /* * If memory interleaving between controllers is NOT @@ -1480,7 +1529,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) { case FSL_DDR_CS0_CS1_CS2_CS3: sa = common_dimm->base_address; - ea = common_dimm->total_mem - 1; + ea = sa + common_dimm->total_mem - 1; break; case FSL_DDR_CS0_CS1_AND_CS2_CS3: if ((i >= 2) && (dimm_number == 0)) { @@ -1537,17 +1586,19 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, sa >>= 24; ea >>= 24; - ddr->cs[i].bnds = (0 - | ((sa & 0xFFF) << 16) /* starting address MSB */ - | ((ea & 0xFFF) << 0) /* ending address MSB */ - ); + if (cs_en) { + ddr->cs[i].bnds = (0 + | ((sa & 0xFFF) << 16)/* starting address MSB */ + | ((ea & 0xFFF) << 0) /* ending address MSB */ + ); + } else { + debug("FSLDDR: setting bnds to 0 for inactive CS\n"); + ddr->cs[i].bnds = 0; + } debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds); - if (cs_en) { - set_csn_config(dimm_number, i, ddr, popts, dimm_params); - set_csn_config_2(i, ddr); - } else - debug("CS%d is disabled.\n", i); + set_csn_config(dimm_number, i, ddr, popts, dimm_params); + set_csn_config_2(i, ddr); } /* @@ -1560,7 +1611,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, set_ddr_eor(ddr, popts); #if !defined(CONFIG_FSL_DDR1) - set_timing_cfg_0(ddr, popts); + set_timing_cfg_0(ddr, popts, dimm_params); #endif set_timing_cfg_3(ddr, popts, common_dimm, cas_latency); @@ -1569,6 +1620,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, cas_latency, additive_latency); set_ddr_cdr1(ddr, popts); + set_ddr_cdr2(ddr, popts); set_ddr_sdram_cfg(ddr, popts, common_dimm); ip_rev = fsl_ddr_get_version(); if (ip_rev > 0x40400) diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c index f59d105..cb71f94 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c @@ -452,6 +452,8 @@ static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo, CTRL_OPTIONS(rcw_override), CTRL_OPTIONS(rcw_1), CTRL_OPTIONS(rcw_2), + CTRL_OPTIONS(ddr_cdr1), + CTRL_OPTIONS(ddr_cdr2), CTRL_OPTIONS(tCKE_clock_pulse_width_ps), CTRL_OPTIONS(tFAW_window_four_activates_ps), CTRL_OPTIONS(trwt_override), @@ -518,6 +520,8 @@ static void print_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr) CFG_REGS(timing_cfg_5), CFG_REGS(ddr_zq_cntl), CFG_REGS(ddr_wrlvl_cntl), + CFG_REGS(ddr_wrlvl_cntl_2), + CFG_REGS(ddr_wrlvl_cntl_3), CFG_REGS(ddr_sr_cntr), CFG_REGS(ddr_sdram_rcw_1), CFG_REGS(ddr_sdram_rcw_2), @@ -525,6 +529,7 @@ static void print_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr) CFG_REGS(ddr_cdr2), CFG_REGS(err_disable), CFG_REGS(err_int_en), + CFG_REGS(ddr_eor), }; static const unsigned int n_opts = ARRAY_SIZE(options); @@ -584,6 +589,8 @@ static void fsl_ddr_regs_edit(fsl_ddr_info_t *pinfo, CFG_REGS(timing_cfg_5), CFG_REGS(ddr_zq_cntl), CFG_REGS(ddr_wrlvl_cntl), + CFG_REGS(ddr_wrlvl_cntl_2), + CFG_REGS(ddr_wrlvl_cntl_3), CFG_REGS(ddr_sr_cntr), CFG_REGS(ddr_sdram_rcw_1), CFG_REGS(ddr_sdram_rcw_2), @@ -593,7 +600,7 @@ static void fsl_ddr_regs_edit(fsl_ddr_info_t *pinfo, CFG_REGS(err_int_en), CFG_REGS(ddr_sdram_rcw_2), CFG_REGS(ddr_sdram_rcw_2), - + CFG_REGS(ddr_eor), }; static const unsigned int n_opts = ARRAY_SIZE(options); @@ -689,6 +696,8 @@ static void print_memctl_options(const memctl_options_t *popts) CTRL_OPTIONS(rcw_override), CTRL_OPTIONS(rcw_1), CTRL_OPTIONS(rcw_2), + CTRL_OPTIONS_HEX(ddr_cdr1), + CTRL_OPTIONS_HEX(ddr_cdr2), CTRL_OPTIONS(tCKE_clock_pulse_width_ps), CTRL_OPTIONS(tFAW_window_four_activates_ps), CTRL_OPTIONS(trwt_override), @@ -1597,6 +1606,7 @@ unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo) * doesn't return */ do_reset(NULL, 0, 0, NULL); + printf("Reset didn't work\n"); } if (strcmp(argv[0], "recompute") == 0) { diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c index 03a784c..6a1f4e4 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c @@ -76,7 +76,7 @@ compute_cas_latency_ddr3(const dimm_params_t *dimm_params, unsigned int compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, common_timing_params_t *outpdimm, - unsigned int number_of_dimms) + const unsigned int number_of_dimms) { unsigned int i, j; @@ -126,13 +126,20 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, temp1++; continue; } + + /* + * check if quad-rank DIMM is plugged if + * CONFIG_CHIP_SELECT_QUAD_CAPABLE is not defined + * Only the board with proper design is capable + */ +#ifndef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE if (dimm_params[i].n_ranks == 4 && \ CONFIG_CHIP_SELECTS_PER_CTRL/CONFIG_DIMM_SLOTS_PER_CTLR < 4) { printf("Found Quad-rank DIMM, not able to support."); temp1++; continue; } - +#endif /* * Find minimum tCKmax_ps to find fastest slow speed, * i.e., this is the slowest the whole system can go. @@ -236,11 +243,14 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, if (outpdimm->all_DIMMs_registered) for (j = 0; j < 16; j++) { outpdimm->rcw[j] = dimm_params[0].rcw[j]; - for (i = 1; i < number_of_dimms; i++) + for (i = 1; i < number_of_dimms; i++) { + if (!dimm_params[i].n_ranks) + continue; if (dimm_params[i].rcw[j] != dimm_params[0].rcw[j]) { temp1 = 1; break; } + } } if (temp1 != 0) diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c index b47268c..d6b73c7 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c @@ -77,7 +77,19 @@ static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address) sizeof(generic_spd_eeprom_t)); if (ret) { - printf("DDR: failed to read SPD from address %u\n", i2c_address); + if (i2c_address == +#ifdef SPD_EEPROM_ADDRESS + SPD_EEPROM_ADDRESS +#elif defined(SPD_EEPROM_ADDRESS1) + SPD_EEPROM_ADDRESS1 +#endif + ) { + printf("DDR: failed to read SPD from address %u\n", + i2c_address); + } else { + debug("DDR: failed to read SPD from address %u\n", + i2c_address); + } memset(spd, 0, sizeof(generic_spd_eeprom_t)); } } @@ -526,6 +538,17 @@ phys_size_t fsl_ddr_sdram(void) #endif total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 0); + /* setup 3-way interleaving before enabling DDRC */ + switch (info.memctl_opts[0].memctl_interleaving_mode) { + case FSL_DDR_3WAY_1KB_INTERLEAVING: + case FSL_DDR_3WAY_4KB_INTERLEAVING: + case FSL_DDR_3WAY_8KB_INTERLEAVING: + fsl_ddr_set_intl3r(info.memctl_opts[0].memctl_interleaving_mode); + break; + default: + break; + } + /* Program configuration registers. */ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { debug("Programming controller %u\n", i); @@ -561,7 +584,6 @@ phys_size_t fsl_ddr_sdram(void) case FSL_DDR_3WAY_8KB_INTERLEAVING: law_memctl = LAW_TRGT_IF_DDR_INTLV_123; if (i == 0) { - fsl_ddr_set_intl3r(info.memctl_opts[i].memctl_interleaving_mode); fsl_ddr_set_lawbar(&info.common_timing_params[i], law_memctl, i); } diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c index 13e4825..2f13b8f 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c @@ -474,6 +474,34 @@ static const struct dynamic_odt odt_unknown[4] = { } }; #endif + +/* + * Automatically seleect bank interleaving mode based on DIMMs + * in this order: cs0_cs1_cs2_cs3, cs0_cs1, null. + * This function only deal with one or two slots per controller. + */ +static inline unsigned int auto_bank_intlv(dimm_params_t *pdimm) +{ +#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) + if (pdimm[0].n_ranks == 4) + return FSL_DDR_CS0_CS1_CS2_CS3; + else if (pdimm[0].n_ranks == 2) + return FSL_DDR_CS0_CS1; +#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2) +#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE + if (pdimm[0].n_ranks == 4) + return FSL_DDR_CS0_CS1_CS2_CS3; +#endif + if (pdimm[0].n_ranks == 2) { + if (pdimm[1].n_ranks == 2) + return FSL_DDR_CS0_CS1_CS2_CS3; + else + return FSL_DDR_CS0_CS1; + } +#endif + return 0; +} + unsigned int populate_memctl_options(int all_DIMMs_registered, memctl_options_t *popts, dimm_params_t *pdimm, @@ -510,6 +538,14 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, } } else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) { switch (pdimm[0].n_ranks) { +#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE + case 4: + pdodt = single_Q; + if (pdimm[1].n_ranks) + printf("Error: Quad- and Dual-rank DIMMs " + "cannot be used together\n"); + break; +#endif case 2: switch (pdimm[1].n_ranks) { case 2: @@ -900,6 +936,9 @@ done: else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv", "cs0_cs1_cs2_cs3", buf)) popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_CS2_CS3; + else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv", + "auto", buf)) + popts->ba_intlv_ctl = auto_bank_intlv(pdimm); else printf("hwconfig has unrecognized parameter for bank_intlv.\n"); switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) { @@ -912,6 +951,10 @@ done: "interleaving disabled!\n", ctrl_num); } #elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2) +#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE + if (pdimm[0].n_ranks == 4) + break; +#endif if ((pdimm[0].n_ranks < 2) && (pdimm[1].n_ranks < 2)) { popts->ba_intlv_ctl = 0; printf("Not enough bank(chip-select) for " @@ -1063,7 +1106,7 @@ void check_interleaving_options(fsl_ddr_info_t *pinfo) break; } debug("%d of %d controllers are interleaving.\n", j, k); - if (j != k) { + if (j && (j != k)) { for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) pinfo->memctl_opts[i].memctl_interleaving = 0; printf("Not all controllers have compatible " diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/arch/powerpc/cpu/mpc8xxx/ddr/util.c index 664ad09..940ffff 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/util.c @@ -121,6 +121,16 @@ void fsl_ddr_set_intl3r(const unsigned int granule_size) #endif } +u32 fsl_ddr_get_intl3r(void) +{ + u32 val = 0; +#ifdef CONFIG_E6500 + u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004); + val = *mcintl3r; +#endif + return val; +} + void board_add_ram_info(int use_default) { #if defined(CONFIG_MPC83xx) @@ -140,6 +150,18 @@ void board_add_ram_info(int use_default) uint32_t sdram_cfg = in_be32(&ddr->sdram_cfg); int cas_lat; +#if CONFIG_NUM_DDR_CONTROLLERS >= 2 + if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) { + ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR2_ADDR; + sdram_cfg = in_be32(&ddr->sdram_cfg); + } +#endif +#if CONFIG_NUM_DDR_CONTROLLERS >= 3 + if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) { + ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR3_ADDR; + sdram_cfg = in_be32(&ddr->sdram_cfg); + } +#endif puts(" (DDR"); switch ((sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >> SDRAM_CFG_SDRAM_TYPE_SHIFT) { diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c index 32ab050..68db8e2 100644 --- a/arch/powerpc/cpu/mpc8xxx/fdt.c +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c @@ -139,6 +139,8 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) const char *phys[] = { "ulpi", "utmi" }; const char *mode = NULL; const char *phy_type = NULL; + const char *dr_mode_type = NULL; + const char *dr_phy_type = NULL; char usb1_defined = 0; int usb_mode_off = -1; int usb_phy_off = -1; @@ -156,6 +158,7 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) break; } } + for (j = 0; j < ARRAY_SIZE(phys); j++) { if (hwconfig_subarg_cmp(str, "phy_type", phys[j])) { @@ -163,31 +166,46 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) break; } } - if (mode_idx >= 0) { - usb_mode_off = fdt_fixup_usb_mode_phy_type(blob, - modes[mode_idx], NULL, usb_mode_off); - if (usb_mode_off < 0) - return; - } - if (phy_idx >= 0) { - usb_phy_off = fdt_fixup_usb_mode_phy_type(blob, - NULL, phys[phy_idx], usb_phy_off); - if (usb_phy_off < 0) - return; - } + + dr_mode_type = modes[mode_idx]; + dr_phy_type = phys[phy_idx]; + + /* use usb_dr_mode and usb_phy_type if + usb1_defined = 0; these variables are to + be deprecated */ if (!strcmp(str, "usb1")) usb1_defined = 1; - if (mode_idx < 0 && phy_idx < 0) + + if (mode_idx < 0 && phy_idx < 0) { printf("WARNING: invalid phy or mode\n"); + return; + } } + + usb_mode_off = fdt_fixup_usb_mode_phy_type(blob, + dr_mode_type, NULL, usb_mode_off); + + if (usb_mode_off < 0) + return; + + usb_phy_off = fdt_fixup_usb_mode_phy_type(blob, + NULL, dr_phy_type, usb_phy_off); + + if (usb_phy_off < 0) + return; } + if (!usb1_defined) { int usb_off = -1; mode = getenv("usb_dr_mode"); phy_type = getenv("usb_phy_type"); - if (!mode && !phy_type) - return; - fdt_fixup_usb_mode_phy_type(blob, mode, phy_type, usb_off); + if (mode || phy_type) { + printf("WARNING: usb_dr_mode and usb_phy_type " + "are to be deprecated soon. Use " + "hwconfig to set these values instead!!\n"); + fdt_fixup_usb_mode_phy_type(blob, mode, + phy_type, usb_off); + } } } #endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */ diff --git a/arch/powerpc/cpu/mpc8xxx/srio.c b/arch/powerpc/cpu/mpc8xxx/srio.c index 0cb65b3..6e6f7dc 100644 --- a/arch/powerpc/cpu/mpc8xxx/srio.c +++ b/arch/powerpc/cpu/mpc8xxx/srio.c @@ -22,7 +22,9 @@ #include <asm/fsl_law.h> #include <asm/fsl_serdes.h> #include <asm/fsl_srio.h> +#include <asm/errno.h> +#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER #define SRIO_PORT_ACCEPT_ALL 0x10000001 #define SRIO_IB_ATMU_AR 0x80f55000 #define SRIO_OB_ATMU_AR_MAINT 0x80077000 @@ -31,10 +33,16 @@ #define SRIO_MAINT_WIN_SIZE 0x1000000 /* 16M */ #define SRIO_RW_WIN_SIZE 0x100000 /* 1M */ #define SRIO_LCSBA1CSR 0x60000000 +#endif #if defined(CONFIG_FSL_CORENET) +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + #define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR3_SRIO1 + #define _DEVDISR_SRIO2 FSL_CORENET_DEVDISR3_SRIO2 +#else #define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR_SRIO1 #define _DEVDISR_SRIO2 FSL_CORENET_DEVDISR_SRIO2 +#endif #define _DEVDISR_RMU FSL_CORENET_DEVDISR_RMU #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR #elif defined(CONFIG_MPC85xx) @@ -52,16 +60,206 @@ #error "No defines for DEVDISR_SRIO" #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 +/* + * Erratum A-004034 + * Affects: SRIO + * Description: During port initialization, the SRIO port performs + * lane synchronization (detecting valid symbols on a lane) and + * lane alignment (coordinating multiple lanes to receive valid data + * across lanes). Internal errors in lane synchronization and lane + * alignment may cause failure to achieve link initialization at + * the configured port width. + * An SRIO port configured as a 4x port may see one of these scenarios: + * 1. One or more lanes fails to achieve lane synchronization. Depending + * on which lanes fail, this may result in downtraining from 4x to 1x + * on lane 0, 4x to 1x on lane R (redundant lane). + * 2. The link may fail to achieve lane alignment as a 4x, even though + * all 4 lanes achieve lane synchronization, and downtrain to a 1x. + * An SRIO port configured as a 1x port may fail to complete port + * initialization (PnESCSR[PU] never deasserts) because of scenario 1. + * Impact: SRIO port may downtrain to 1x, or may fail to complete + * link initialization. Once a port completes link initialization + * successfully, it will operate normally. + */ +static int srio_erratum_a004034(u8 port) +{ + serdes_corenet_t *srds_regs; + u32 conf_lane; + u32 init_lane; + int idx, first, last; + u32 i; + unsigned long long end_tick; + struct ccsr_rio *srio_regs = (void *)CONFIG_SYS_FSL_SRIO_ADDR; + + srds_regs = (void *)(CONFIG_SYS_FSL_CORENET_SERDES_ADDR); + conf_lane = (in_be32((void *)&srds_regs->srdspccr0) + >> (12 - port * 4)) & 0x3; + init_lane = (in_be32((void *)&srio_regs->lp_serial + .port[port].pccsr) >> 27) & 0x7; + + /* + * Start a counter set to ~2 ms after the SERDES reset is + * complete (SERDES SRDSBnRSTCTL[RST_DONE]=1 for n + * corresponding to the SERDES bank/PLL for the SRIO port). + */ + if (in_be32((void *)&srds_regs->bank[0].rstctl) + & SRDS_RSTCTL_RSTDONE) { + /* + * Poll the port uninitialized status (SRIO PnESCSR[PO]) until + * PO=1 or the counter expires. If the counter expires, the + * port has failed initialization: go to recover steps. If PO=1 + * and the desired port width is 1x, go to normal steps. If + * PO = 1 and the desired port width is 4x, go to recover steps. + */ + end_tick = usec2ticks(2000) + get_ticks(); + do { + if (in_be32((void *)&srio_regs->lp_serial + .port[port].pescsr) & 0x2) { + if (conf_lane == 0x1) + goto host_ok; + else { + if (init_lane == 0x2) + goto host_ok; + else + break; + } + } + } while (end_tick > get_ticks()); + + /* recover at most 3 times */ + for (i = 0; i < 3; i++) { + /* Set SRIO PnCCSR[PD]=1 */ + setbits_be32((void *)&srio_regs->lp_serial + .port[port].pccsr, + 0x800000); + /* + * Set SRIO PnPCR[OBDEN] on the host to + * enable the discarding of any pending packets. + */ + setbits_be32((void *)&srio_regs->impl.port[port].pcr, + 0x04); + /* Wait 50 us */ + udelay(50); + /* Run sync command */ + isync(); + + if (port) + first = serdes_get_first_lane(SRIO2); + else + first = serdes_get_first_lane(SRIO1); + if (unlikely(first < 0)) + return -ENODEV; + if (conf_lane == 0x1) + last = first; + else + last = first + 3; + /* + * Set SERDES BnGCRm0[RRST]=0 for each SRIO + * bank n and lane m. + */ + for (idx = first; idx <= last; idx++) + clrbits_be32(&srds_regs->lane[idx].gcr0, + SRDS_GCR0_RRST); + /* + * Read SERDES BnGCRm0 for each SRIO + * bank n and lane m + */ + for (idx = first; idx <= last; idx++) + in_be32(&srds_regs->lane[idx].gcr0); + /* Run sync command */ + isync(); + /* Wait >= 100 ns */ + udelay(1); + /* + * Set SERDES BnGCRm0[RRST]=1 for each SRIO + * bank n and lane m. + */ + for (idx = first; idx <= last; idx++) + setbits_be32(&srds_regs->lane[idx].gcr0, + SRDS_GCR0_RRST); + /* + * Read SERDES BnGCRm0 for each SRIO + * bank n and lane m + */ + for (idx = first; idx <= last; idx++) + in_be32(&srds_regs->lane[idx].gcr0); + /* Run sync command */ + isync(); + /* Wait >= 300 ns */ + udelay(1); + + /* Write 1 to clear all bits in SRIO PnSLCSR */ + out_be32((void *)&srio_regs->impl.port[port].slcsr, + 0xffffffff); + /* Clear SRIO PnPCR[OBDEN] on the host */ + clrbits_be32((void *)&srio_regs->impl.port[port].pcr, + 0x04); + /* Set SRIO PnCCSR[PD]=0 */ + clrbits_be32((void *)&srio_regs->lp_serial + .port[port].pccsr, + 0x800000); + /* Wait >= 24 ms */ + udelay(24000); + /* Poll the state of the port again */ + init_lane = + (in_be32((void *)&srio_regs->lp_serial + .port[port].pccsr) >> 27) & 0x7; + if (in_be32((void *)&srio_regs->lp_serial + .port[port].pescsr) & 0x2) { + if (conf_lane == 0x1) + goto host_ok; + else { + if (init_lane == 0x2) + goto host_ok; + } + } + if (i == 2) + return -ENODEV; + } + } else + return -ENODEV; + +host_ok: + /* Poll PnESCSR[OES] on the host until it is clear */ + end_tick = usec2ticks(1000000) + get_ticks(); + do { + if (!(in_be32((void *)&srio_regs->lp_serial.port[port].pescsr) + & 0x10000)) { + out_be32(((void *)&srio_regs->lp_serial + .port[port].pescsr), 0xffffffff); + out_be32(((void *)&srio_regs->phys_err + .port[port].edcsr), 0); + out_be32(((void *)&srio_regs->logical_err.ltledcsr), 0); + return 0; + } + } while (end_tick > get_ticks()); + + return -ENODEV; +} +#endif + void srio_init(void) { ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR; int srio1_used = 0, srio2_used = 0; + u32 *devdisr; +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + devdisr = &gur->devdisr3; +#else + devdisr = &gur->devdisr; +#endif if (is_serdes_configured(SRIO1)) { set_next_law(CONFIG_SYS_SRIO1_MEM_PHYS, law_size_bits(CONFIG_SYS_SRIO1_MEM_SIZE), LAW_TRGT_IF_RIO_1); srio1_used = 1; +#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 + if (srio_erratum_a004034(0) < 0) + printf("SRIO1: enabled but port error\n"); + else +#endif printf("SRIO1: enabled\n"); } else { printf("SRIO1: disabled\n"); @@ -73,7 +271,13 @@ void srio_init(void) law_size_bits(CONFIG_SYS_SRIO2_MEM_SIZE), LAW_TRGT_IF_RIO_2); srio2_used = 1; +#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 + if (srio_erratum_a004034(1) < 0) + printf("SRIO2: enabled but port error\n"); + else +#endif printf("SRIO2: enabled\n"); + } else { printf("SRIO2: disabled\n"); } @@ -82,20 +286,20 @@ void srio_init(void) #ifdef CONFIG_FSL_CORENET /* On FSL_CORENET devices we can disable individual ports */ if (!srio1_used) - setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO1); + setbits_be32(devdisr, _DEVDISR_SRIO1); if (!srio2_used) - setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO2); + setbits_be32(devdisr, _DEVDISR_SRIO2); #endif /* neither port is used - disable everything */ if (!srio1_used && !srio2_used) { - setbits_be32(&gur->devdisr, _DEVDISR_SRIO1); - setbits_be32(&gur->devdisr, _DEVDISR_SRIO2); - setbits_be32(&gur->devdisr, _DEVDISR_RMU); + setbits_be32(devdisr, _DEVDISR_SRIO1); + setbits_be32(devdisr, _DEVDISR_SRIO2); + setbits_be32(devdisr, _DEVDISR_RMU); } } -#ifdef CONFIG_FSL_CORENET +#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER void srio_boot_master(int port) { struct ccsr_rio *srio = (void *)CONFIG_SYS_FSL_SRIO_ADDR; |