diff options
Diffstat (limited to 'arch/powerpc/cpu')
-rw-r--r-- | arch/powerpc/cpu/mpc85xx/cpu_init.c | 17 | ||||
-rw-r--r-- | arch/powerpc/cpu/mpc8xxx/srio.c | 137 |
2 files changed, 60 insertions, 94 deletions
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 74863b4..f293265 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -480,11 +480,18 @@ skip_l2: #ifdef CONFIG_SYS_SRIO srio_init(); -#ifdef CONFIG_SRIOBOOT_MASTER - srio_boot_master(); -#ifdef CONFIG_SRIOBOOT_SLAVE_HOLDOFF - srio_boot_master_release_slave(); -#endif +#ifdef CONFIG_FSL_CORENET + char *s = getenv("bootmaster"); + if (s) { + if (!strcmp(s, "SRIO1")) { + srio_boot_master(1); + srio_boot_master_release_slave(1); + } + if (!strcmp(s, "SRIO2")) { + srio_boot_master(2); + srio_boot_master_release_slave(2); + } + } #endif #endif diff --git a/arch/powerpc/cpu/mpc8xxx/srio.c b/arch/powerpc/cpu/mpc8xxx/srio.c index c7f3949..ae83d6e 100644 --- a/arch/powerpc/cpu/mpc8xxx/srio.c +++ b/arch/powerpc/cpu/mpc8xxx/srio.c @@ -95,126 +95,92 @@ void srio_init(void) } } -#ifdef CONFIG_SRIOBOOT_MASTER -void srio_boot_master(void) +#ifdef CONFIG_FSL_CORENET +void srio_boot_master(int port) { struct ccsr_rio *srio = (void *)CONFIG_SYS_FSL_SRIO_ADDR; /* set port accept-all */ - out_be32((void *)&srio->impl.port[CONFIG_SRIOBOOT_MASTER_PORT].ptaacr, + out_be32((void *)&srio->impl.port[port - 1].ptaacr, SRIO_PORT_ACCEPT_ALL); - debug("SRIOBOOT - MASTER: Master port [ %d ] for srio boot.\n", - CONFIG_SRIOBOOT_MASTER_PORT); + debug("SRIOBOOT - MASTER: Master port [ %d ] for srio boot.\n", port); /* configure inbound window for slave's u-boot image */ debug("SRIOBOOT - MASTER: Inbound window for slave's image; " "Local = 0x%llx, Srio = 0x%llx, Size = 0x%x\n", - (u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS1, - (u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS1, + (u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_PHYS, + (u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_BUS1, CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE); - out_be32((void *)&srio->atmu - .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[0].riwtar, - CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS1 >> 12); - out_be32((void *)&srio->atmu - .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[0].riwbar, - CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS1 >> 12); - out_be32((void *)&srio->atmu - .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[0].riwar, + out_be32((void *)&srio->atmu.port[port - 1].inbw[0].riwtar, + CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_PHYS >> 12); + out_be32((void *)&srio->atmu.port[port - 1].inbw[0].riwbar, + CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_BUS1 >> 12); + out_be32((void *)&srio->atmu.port[port - 1].inbw[0].riwar, SRIO_IB_ATMU_AR | atmu_size_mask(CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE)); /* configure inbound window for slave's u-boot image */ debug("SRIOBOOT - MASTER: Inbound window for slave's image; " "Local = 0x%llx, Srio = 0x%llx, Size = 0x%x\n", - (u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS2, - (u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS2, + (u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_PHYS, + (u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_BUS2, CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE); - out_be32((void *)&srio->atmu - .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[1].riwtar, - CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS2 >> 12); - out_be32((void *)&srio->atmu - .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[1].riwbar, - CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS2 >> 12); - out_be32((void *)&srio->atmu - .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[1].riwar, + out_be32((void *)&srio->atmu.port[port - 1].inbw[1].riwtar, + CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_PHYS >> 12); + out_be32((void *)&srio->atmu.port[port - 1].inbw[1].riwbar, + CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_BUS2 >> 12); + out_be32((void *)&srio->atmu.port[port - 1].inbw[1].riwar, SRIO_IB_ATMU_AR | atmu_size_mask(CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE)); - /* configure inbound window for slave's ucode */ - debug("SRIOBOOT - MASTER: Inbound window for slave's ucode; " + /* configure inbound window for slave's ucode and ENV */ + debug("SRIOBOOT - MASTER: Inbound window for slave's ucode and ENV; " "Local = 0x%llx, Srio = 0x%llx, Size = 0x%x\n", - (u64)CONFIG_SRIOBOOT_SLAVE_UCODE_LAW_PHYS, - (u64)CONFIG_SRIOBOOT_SLAVE_UCODE_SRIO_PHYS, - CONFIG_SRIOBOOT_SLAVE_UCODE_SIZE); - out_be32((void *)&srio->atmu - .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[2].riwtar, - CONFIG_SRIOBOOT_SLAVE_UCODE_LAW_PHYS >> 12); - out_be32((void *)&srio->atmu - .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[2].riwbar, - CONFIG_SRIOBOOT_SLAVE_UCODE_SRIO_PHYS >> 12); - out_be32((void *)&srio->atmu - .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[2].riwar, - SRIO_IB_ATMU_AR - | atmu_size_mask(CONFIG_SRIOBOOT_SLAVE_UCODE_SIZE)); - - /* configure inbound window for slave's ENV */ - debug("SRIOBOOT - MASTER: Inbound window for slave's ENV; " - "Local = 0x%llx, Siro = 0x%llx, Size = 0x%x\n", - CONFIG_SRIOBOOT_SLAVE_ENV_LAW_PHYS, - CONFIG_SRIOBOOT_SLAVE_ENV_SRIO_PHYS, - CONFIG_SRIOBOOT_SLAVE_ENV_SIZE); - out_be32((void *)&srio->atmu - .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[3].riwtar, - CONFIG_SRIOBOOT_SLAVE_ENV_LAW_PHYS >> 12); - out_be32((void *)&srio->atmu - .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[3].riwbar, - CONFIG_SRIOBOOT_SLAVE_ENV_SRIO_PHYS >> 12); - out_be32((void *)&srio->atmu - .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[3].riwar, + (u64)CONFIG_SRIOBOOT_SLAVE_UCODE_ENV_MEM_PHYS, + (u64)CONFIG_SRIOBOOT_SLAVE_UCODE_ENV_MEM_BUS, + CONFIG_SRIOBOOT_SLAVE_UCODE_ENV_SIZE); + out_be32((void *)&srio->atmu.port[port - 1].inbw[2].riwtar, + CONFIG_SRIOBOOT_SLAVE_UCODE_ENV_MEM_PHYS >> 12); + out_be32((void *)&srio->atmu.port[port - 1].inbw[2].riwbar, + CONFIG_SRIOBOOT_SLAVE_UCODE_ENV_MEM_BUS >> 12); + out_be32((void *)&srio->atmu.port[port - 1].inbw[2].riwar, SRIO_IB_ATMU_AR - | atmu_size_mask(CONFIG_SRIOBOOT_SLAVE_ENV_SIZE)); + | atmu_size_mask(CONFIG_SRIOBOOT_SLAVE_UCODE_ENV_SIZE)); } -#ifdef CONFIG_SRIOBOOT_SLAVE_HOLDOFF -void srio_boot_master_release_slave(void) +void srio_boot_master_release_slave(int port) { struct ccsr_rio *srio = (void *)CONFIG_SYS_FSL_SRIO_ADDR; u32 escsr; debug("SRIOBOOT - MASTER: " "Check the port status and release slave core ...\n"); - escsr = in_be32((void *)&srio->lp_serial - .port[CONFIG_SRIOBOOT_MASTER_PORT].pescsr); + escsr = in_be32((void *)&srio->lp_serial.port[port - 1].pescsr); if (escsr & 0x2) { if (escsr & 0x10100) { debug("SRIOBOOT - MASTER: Port [ %d ] is error.\n", - CONFIG_SRIOBOOT_MASTER_PORT); + port); } else { debug("SRIOBOOT - MASTER: " - "Port [ %d ] is ready, now release slave's core ...\n", - CONFIG_SRIOBOOT_MASTER_PORT); + "Port [ %d ] is ready, now release slave's core ...\n", + port); /* * configure outbound window * with maintenance attribute to set slave's LCSBA1CSR */ - out_be32((void *)&srio->atmu - .port[CONFIG_SRIOBOOT_MASTER_PORT] + out_be32((void *)&srio->atmu.port[port - 1] .outbw[1].rowtar, 0); - out_be32((void *)&srio->atmu - .port[CONFIG_SRIOBOOT_MASTER_PORT] + out_be32((void *)&srio->atmu.port[port - 1] .outbw[1].rowtear, 0); - if (CONFIG_SRIOBOOT_MASTER_PORT) - out_be32((void *)&srio->atmu - .port[CONFIG_SRIOBOOT_MASTER_PORT] + if (port - 1) + out_be32((void *)&srio->atmu.port[port - 1] .outbw[1].rowbar, CONFIG_SYS_SRIO2_MEM_PHYS >> 12); else - out_be32((void *)&srio->atmu - .port[CONFIG_SRIOBOOT_MASTER_PORT] + out_be32((void *)&srio->atmu.port[port - 1] .outbw[1].rowbar, CONFIG_SYS_SRIO1_MEM_PHYS >> 12); - out_be32((void *)&srio->atmu - .port[CONFIG_SRIOBOOT_MASTER_PORT] + out_be32((void *)&srio->atmu.port[port - 1] .outbw[1].rowar, SRIO_OB_ATMU_AR_MAINT | atmu_size_mask(SRIO_MAINT_WIN_SIZE)); @@ -223,27 +189,22 @@ void srio_boot_master_release_slave(void) * configure outbound window * with R/W attribute to set slave's BRR */ - out_be32((void *)&srio->atmu - .port[CONFIG_SRIOBOOT_MASTER_PORT] + out_be32((void *)&srio->atmu.port[port - 1] .outbw[2].rowtar, SRIO_LCSBA1CSR >> 9); - out_be32((void *)&srio->atmu - .port[CONFIG_SRIOBOOT_MASTER_PORT] + out_be32((void *)&srio->atmu.port[port - 1] .outbw[2].rowtear, 0); - if (CONFIG_SRIOBOOT_MASTER_PORT) - out_be32((void *)&srio->atmu - .port[CONFIG_SRIOBOOT_MASTER_PORT] + if (port - 1) + out_be32((void *)&srio->atmu.port[port - 1] .outbw[2].rowbar, (CONFIG_SYS_SRIO2_MEM_PHYS + SRIO_MAINT_WIN_SIZE) >> 12); else - out_be32((void *)&srio->atmu - .port[CONFIG_SRIOBOOT_MASTER_PORT] + out_be32((void *)&srio->atmu.port[port - 1] .outbw[2].rowbar, (CONFIG_SYS_SRIO1_MEM_PHYS + SRIO_MAINT_WIN_SIZE) >> 12); - out_be32((void *)&srio->atmu - .port[CONFIG_SRIOBOOT_MASTER_PORT] + out_be32((void *)&srio->atmu.port[port - 1] .outbw[2].rowar, SRIO_OB_ATMU_AR_RW | atmu_size_mask(SRIO_RW_WIN_SIZE)); @@ -252,7 +213,7 @@ void srio_boot_master_release_slave(void) * Set the LCSBA1CSR register in slave * by the maint-outbound window */ - if (CONFIG_SRIOBOOT_MASTER_PORT) { + if (port - 1) { out_be32((void *)CONFIG_SYS_SRIO2_MEM_VIRT + SRIO_LCSBA1CSR_OFFSET, SRIO_LCSBA1CSR); @@ -289,8 +250,6 @@ void srio_boot_master_release_slave(void) "Release slave successfully! Now the slave should start up!\n"); } } else - debug("SRIOBOOT - MASTER: Port [ %d ] is not ready.\n", - CONFIG_SRIOBOOT_MASTER_PORT); + debug("SRIOBOOT - MASTER: Port [ %d ] is not ready.\n", port); } #endif -#endif |