summaryrefslogtreecommitdiff
path: root/arch/powerpc/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/cpu')
-rw-r--r--arch/powerpc/cpu/mpc85xx/Makefile12
-rw-r--r--arch/powerpc/cpu/mpc85xx/b4860_ids.c141
-rw-r--r--arch/powerpc/cpu/mpc85xx/b4860_serdes.c162
-rw-r--r--arch/powerpc/cpu/mpc85xx/cmd_errata.c14
-rw-r--r--arch/powerpc/cpu/mpc85xx/cpu.c42
-rw-r--r--arch/powerpc/cpu/mpc85xx/cpu_init.c62
-rw-r--r--arch/powerpc/cpu/mpc85xx/ddr-gen3.c91
-rw-r--r--arch/powerpc/cpu/mpc85xx/fdt.c34
-rw-r--r--arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c203
-rw-r--r--arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h26
-rw-r--r--arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c70
-rw-r--r--arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h3
-rw-r--r--arch/powerpc/cpu/mpc85xx/liodn.c60
-rw-r--r--arch/powerpc/cpu/mpc85xx/mp.c155
-rw-r--r--arch/powerpc/cpu/mpc85xx/mp.h5
-rw-r--r--arch/powerpc/cpu/mpc85xx/p5040_ids.c127
-rw-r--r--arch/powerpc/cpu/mpc85xx/p5040_serdes.c117
-rw-r--r--arch/powerpc/cpu/mpc85xx/portals.c13
-rw-r--r--arch/powerpc/cpu/mpc85xx/release.S219
-rw-r--r--arch/powerpc/cpu/mpc85xx/speed.c163
-rw-r--r--arch/powerpc/cpu/mpc85xx/start.S346
-rw-r--r--arch/powerpc/cpu/mpc85xx/t4240_ids.c203
-rw-r--r--arch/powerpc/cpu/mpc85xx/t4240_serdes.c237
-rw-r--r--arch/powerpc/cpu/mpc85xx/tlb.c2
-rw-r--r--arch/powerpc/cpu/mpc86xx/fdt.c2
-rw-r--r--arch/powerpc/cpu/mpc86xx/mp.c9
-rw-r--r--arch/powerpc/cpu/mpc8xxx/cpu.c11
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c84
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/interactive.c12
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c16
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/main.c26
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/options.c45
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/util.c22
-rw-r--r--arch/powerpc/cpu/mpc8xxx/fdt.c50
-rw-r--r--arch/powerpc/cpu/mpc8xxx/srio.c216
35 files changed, 2567 insertions, 433 deletions
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 33e93c8..78c412d 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -66,6 +66,9 @@ COBJS-$(CONFIG_PPC_P2041) += ddr-gen3.o
COBJS-$(CONFIG_PPC_P3041) += ddr-gen3.o
COBJS-$(CONFIG_PPC_P4080) += ddr-gen3.o
COBJS-$(CONFIG_PPC_P5020) += ddr-gen3.o
+COBJS-$(CONFIG_PPC_P5040) += ddr-gen3.o
+COBJS-$(CONFIG_PPC_T4240) += ddr-gen3.o
+COBJS-$(CONFIG_PPC_B4860) += ddr-gen3.o
COBJS-$(CONFIG_BSC9131) += ddr-gen3.o
COBJS-$(CONFIG_CPM2) += ether_fcc.o
@@ -80,10 +83,14 @@ COBJS-$(CONFIG_PPC_P2041) += p2041_ids.o
COBJS-$(CONFIG_PPC_P3041) += p3041_ids.o
COBJS-$(CONFIG_PPC_P4080) += p4080_ids.o
COBJS-$(CONFIG_PPC_P5020) += p5020_ids.o
+COBJS-$(CONFIG_PPC_P5040) += p5040_ids.o
+COBJS-$(CONFIG_PPC_T4240) += t4240_ids.o
+COBJS-$(CONFIG_PPC_B4860) += b4860_ids.o
COBJS-$(CONFIG_QE) += qe_io.o
COBJS-$(CONFIG_CPM2) += serial_scc.o
-COBJS-$(CONFIG_FSL_CORENET) += fsl_corenet_serdes.o
+COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS1) += fsl_corenet_serdes.o
+COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS2) += fsl_corenet2_serdes.o
# SoC specific SERDES support
COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o
@@ -110,6 +117,9 @@ COBJS-$(CONFIG_PPC_P2041) += p2041_serdes.o
COBJS-$(CONFIG_PPC_P3041) += p3041_serdes.o
COBJS-$(CONFIG_PPC_P4080) += p4080_serdes.o
COBJS-$(CONFIG_PPC_P5020) += p5020_serdes.o
+COBJS-$(CONFIG_PPC_P5040) += p5040_serdes.o
+COBJS-$(CONFIG_PPC_T4240) += t4240_serdes.o
+COBJS-$(CONFIG_PPC_B4860) += b4860_serdes.o
COBJS = $(COBJS-y)
COBJS += cpu.o
diff --git a/arch/powerpc/cpu/mpc85xx/b4860_ids.c b/arch/powerpc/cpu/mpc85xx/b4860_ids.c
new file mode 100644
index 0000000..7d33731
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/b4860_ids.c
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+ /* dqrr liodn, frame data liodn, liodn off, sdest */
+ SET_QP_INFO(1, 27, 1, 0),
+ SET_QP_INFO(2, 28, 1, 0),
+ SET_QP_INFO(3, 29, 1, 1),
+ SET_QP_INFO(4, 30, 1, 1),
+ SET_QP_INFO(5, 31, 1, 2),
+ SET_QP_INFO(6, 32, 1, 2),
+ SET_QP_INFO(7, 33, 1, 3),
+ SET_QP_INFO(8, 34, 1, 3),
+ SET_QP_INFO(9, 35, 1, 0),
+ SET_QP_INFO(10, 36, 1, 0),
+ SET_QP_INFO(11, 37, 1, 1),
+ SET_QP_INFO(12, 38, 1, 1),
+ SET_QP_INFO(13, 39, 1, 2),
+ SET_QP_INFO(14, 40, 1, 2),
+ SET_QP_INFO(15, 41, 1, 3),
+ SET_QP_INFO(16, 42, 1, 3),
+ SET_QP_INFO(17, 43, 1, 0),
+ SET_QP_INFO(18, 44, 1, 0),
+ SET_QP_INFO(19, 45, 1, 1),
+ SET_QP_INFO(20, 46, 1, 1),
+ SET_QP_INFO(21, 47, 1, 2),
+ SET_QP_INFO(22, 48, 1, 2),
+ SET_QP_INFO(23, 49, 1, 3),
+ SET_QP_INFO(24, 50, 1, 3),
+ SET_QP_INFO(25, 51, 1, 0),
+};
+#endif
+
+struct srio_liodn_id_table srio_liodn_tbl[] = {
+ SET_SRIO_LIODN_1(1, 307),
+ SET_SRIO_LIODN_1(2, 387),
+};
+int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
+
+struct liodn_id_table liodn_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ SET_QMAN_LIODN(62),
+ SET_BMAN_LIODN(63),
+#endif
+
+ SET_SDHC_LIODN(1, 552),
+
+ SET_USB_LIODN(1, "fsl-usb2-mph", 553),
+
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148),
+
+ SET_DMA_LIODN(1, 147),
+ SET_DMA_LIODN(2, 227),
+
+ SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
+ SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
+ SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0),
+ SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0),
+
+ /* SET_NEXUS_LIODN(557), -- not yet implemented */
+};
+int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct liodn_id_table fman1_liodn_tbl[] = {
+ SET_FMAN_RX_1G_LIODN(1, 0, 88),
+ SET_FMAN_RX_1G_LIODN(1, 1, 89),
+ SET_FMAN_RX_1G_LIODN(1, 2, 90),
+ SET_FMAN_RX_1G_LIODN(1, 3, 91),
+ SET_FMAN_RX_1G_LIODN(1, 4, 92),
+ SET_FMAN_RX_1G_LIODN(1, 5, 93),
+ SET_FMAN_RX_10G_LIODN(1, 0, 94),
+ SET_FMAN_RX_10G_LIODN(1, 1, 95),
+};
+int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
+#endif
+
+struct liodn_id_table sec_liodn_tbl[] = {
+ SET_SEC_JR_LIODN_ENTRY(0, 454, 458),
+ SET_SEC_JR_LIODN_ENTRY(1, 455, 459),
+ SET_SEC_JR_LIODN_ENTRY(2, 456, 460),
+ SET_SEC_JR_LIODN_ENTRY(3, 457, 461),
+ SET_SEC_RTIC_LIODN_ENTRY(a, 453),
+ SET_SEC_RTIC_LIODN_ENTRY(b, 549),
+ SET_SEC_RTIC_LIODN_ENTRY(c, 550),
+ SET_SEC_RTIC_LIODN_ENTRY(d, 551),
+ SET_SEC_DECO_LIODN_ENTRY(0, 541, 610),
+ SET_SEC_DECO_LIODN_ENTRY(1, 542, 611),
+ SET_SEC_DECO_LIODN_ENTRY(2, 543, 612),
+ SET_SEC_DECO_LIODN_ENTRY(3, 544, 613),
+ SET_SEC_DECO_LIODN_ENTRY(4, 545, 614),
+ SET_SEC_DECO_LIODN_ENTRY(5, 546, 615),
+ SET_SEC_DECO_LIODN_ENTRY(6, 547, 616),
+ SET_SEC_DECO_LIODN_ENTRY(7, 548, 617),
+};
+int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_RMAN
+struct liodn_id_table rman_liodn_tbl[] = {
+ /* Set RMan block 0-3 liodn offset */
+ SET_RMAN_LIODN(0, 678),
+ SET_RMAN_LIODN(1, 679),
+ SET_RMAN_LIODN(2, 680),
+ SET_RMAN_LIODN(3, 681),
+};
+int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
+#endif
+
+struct liodn_id_table liodn_bases[] = {
+ [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558),
+#ifdef CONFIG_SYS_DPAA_FMAN
+ [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973),
+#endif
+#ifdef CONFIG_SYS_DPAA_RMAN
+ [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922),
+#endif
+};
diff --git a/arch/powerpc/cpu/mpc85xx/b4860_serdes.c b/arch/powerpc/cpu/mpc85xx/b4860_serdes.c
new file mode 100644
index 0000000..9990202
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/b4860_serdes.c
@@ -0,0 +1,162 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include "fsl_corenet2_serdes.h"
+
+struct serdes_config {
+ u8 protocol;
+ u8 lanes[SRDS_MAX_LANES];
+};
+
+static struct serdes_config serdes1_cfg_tbl[] = {
+ /* SerDes 1 */
+ {0x0D, {CPRI8, CPRI7, CPRI6, CPRI5,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x0E, {CPRI8, CPRI7, CPRI6, CPRI5,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x12, {CPRI8, CPRI7, CPRI6, CPRI5,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x2a, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ CPRI6, CPRI5, CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x30, {AURORA, AURORA,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x32, {AURORA, AURORA,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x33, {AURORA, AURORA,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x34, {AURORA, AURORA,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x3E, {CPRI8, CPRI7, CPRI6, CPRI5,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {}
+};
+static struct serdes_config serdes2_cfg_tbl[] = {
+ /* SerDes 2 */
+ {0x18, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ AURORA, AURORA, SRIO1, SRIO1}},
+ {0x1D, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ AURORA, AURORA, SRIO1, SRIO1}},
+ {0x2B, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SRIO2, SRIO2,
+ AURORA, AURORA, SRIO1, SRIO1}},
+ {0x30, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SRIO2, SRIO2,
+ AURORA, AURORA,
+ SRIO1, SRIO1}},
+ {0x49, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, AURORA,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {0x4A, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, AURORA,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {0x4C, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, AURORA,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {0x4E, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, AURORA,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {0x84, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SRIO2, SRIO2, AURORA, AURORA,
+ XFI_FM1_MAC9, XFI_FM1_MAC10}},
+ {0x85, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SRIO2, SRIO2, AURORA, AURORA,
+ XFI_FM1_MAC9, XFI_FM1_MAC10}},
+ {0x87, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SRIO2, SRIO2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ XFI_FM1_MAC9, XFI_FM1_MAC10}},
+ {0x93, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10}},
+ {0x9E, {PCIE1, PCIE1, PCIE1, PCIE1,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10}},
+ {0x9A, {PCIE1, PCIE1,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10}},
+ {0xB2, {PCIE1, PCIE1, PCIE1, PCIE1,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ XFI_FM1_MAC9, XFI_FM1_MAC10}},
+ {0xC3, {XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+ XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {}
+};
+static struct serdes_config *serdes_cfg_tbl[] = {
+ serdes1_cfg_tbl,
+ serdes2_cfg_tbl,
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+ struct serdes_config *ptr;
+
+ if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ ptr = serdes_cfg_tbl[serdes];
+ while (ptr->protocol) {
+ if (ptr->protocol == cfg)
+ return ptr->lanes[lane];
+ ptr++;
+ }
+
+ return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+ int i;
+ struct serdes_config *ptr;
+
+ if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ ptr = serdes_cfg_tbl[serdes];
+ while (ptr->protocol) {
+ if (ptr->protocol == prtcl)
+ break;
+ ptr++;
+ }
+
+ if (!ptr->protocol)
+ return 0;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (ptr->lanes[i] != NONE)
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index e8989bd..2be192d 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -76,11 +76,15 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC111)
puts("Work-around for Erratum ESDHC111 enabled\n");
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004468
+ puts("Work-around for Erratum A004468 enabled\n");
+#endif
#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC135)
puts("Work-around for Erratum ESDHC135 enabled\n");
#endif
-#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC136)
- puts("Work-around for Erratum ESDHC136 enabled\n");
+#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC13)
+ if (SVR_MAJ(svr) < 3)
+ puts("Work-around for Erratum ESDHC13 enabled\n");
#endif
#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC_A001)
puts("Work-around for Erratum ESDHC-A001 enabled\n");
@@ -127,6 +131,12 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#ifdef CONFIG_SYS_FSL_ERRATUM_A004510
puts("Work-around for Erratum A004510 enabled\n");
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+ puts("Work-around for Erratum SRIO-A004034 enabled\n");
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
+ puts("Work-around for Erratum A004934 enabled\n");
+#endif
return 0;
}
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 5ddb294..db232e6 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -60,20 +60,32 @@ int checkcpu (void)
uint major, minor;
struct cpu_type *cpu;
char buf1[32], buf2[32];
-#if defined(CONFIG_DDR_CLK_FREQ) || defined(CONFIG_FSL_CORENET)
+#if (defined(CONFIG_DDR_CLK_FREQ) || \
+ defined(CONFIG_FSL_CORENET)) && !defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#endif /* CONFIG_FSL_CORENET */
-#ifdef CONFIG_DDR_CLK_FREQ
- u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
- >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
-#else
+
+ /*
+ * Cornet platforms use ddr sync bit in RCW to indicate sync vs async
+ * mode. Previous platform use ddr ratio to do the same. This
+ * information is only for display here.
+ */
#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ u32 ddr_sync = 0; /* only async mode is supported */
+#else
u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC)
>> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT;
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+#else /* CONFIG_FSL_CORENET */
+#ifdef CONFIG_DDR_CLK_FREQ
+ u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
+ >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
#else
u32 ddr_ratio = 0;
-#endif /* CONFIG_FSL_CORENET */
#endif /* CONFIG_DDR_CLK_FREQ */
+#endif /* CONFIG_FSL_CORENET */
+
unsigned int i, core, nr_cores = cpu_numcores();
u32 mask = cpu_mask();
@@ -127,6 +139,11 @@ int checkcpu (void)
printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr);
+ if (nr_cores > CONFIG_MAX_CPUS) {
+ panic("\nUnexpected number of cores: %d, max is %d\n",
+ nr_cores, CONFIG_MAX_CPUS);
+ }
+
get_sys_info(&sysinfo);
puts("Clock Configuration:");
@@ -181,6 +198,10 @@ int checkcpu (void)
}
#endif
+#if defined(CONFIG_FSL_IFC)
+ printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
+#endif
+
#ifdef CONFIG_CPM2
printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
#endif
@@ -196,6 +217,10 @@ int checkcpu (void)
}
#endif
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ printf(" QMAN: %s MHz\n", strmhz(buf1, sysinfo.freqQMAN));
+#endif
+
#ifdef CONFIG_SYS_DPAA_PME
printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freqPME));
#endif
@@ -270,10 +295,7 @@ reset_85xx_watchdog(void)
/*
* Clear TSR(WIS) bit by writing 1
*/
- unsigned long val;
- val = mfspr(SPRN_TSR);
- val |= TSR_WIS;
- mtspr(SPRN_TSR, val);
+ mtspr(SPRN_TSR, TSR_WIS);
}
#endif /* CONFIG_WATCHDOG */
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index afb5671..736293c 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -295,6 +295,43 @@ static void __fsl_serdes__init(void)
}
__attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void);
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+int enable_cluster_l2(void)
+{
+ int i = 0;
+ u32 cluster;
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ struct ccsr_cluster_l2 __iomem *l2cache;
+
+ cluster = in_be32(&gur->tp_cluster[i].lower);
+ if (cluster & TP_CLUSTER_EOC)
+ return 0;
+
+ /* The first cache has already been set up, so skip it */
+ i++;
+
+ /* Look through the remaining clusters, and set up their caches */
+ do {
+ l2cache = (void __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2 + i * 0x40000);
+ cluster = in_be32(&gur->tp_cluster[i].lower);
+
+ /* set stash ID to (cluster) * 2 + 32 + 1 */
+ clrsetbits_be32(&l2cache->l2csr1, 0xff, 32 + i * 2 + 1);
+
+ printf("enable l2 for cluster %d %p\n", i, l2cache);
+
+ out_be32(&l2cache->l2csr0, L2CSR0_L2FI|L2CSR0_L2LFC);
+ while ((in_be32(&l2cache->l2csr0) &
+ (L2CSR0_L2FI|L2CSR0_L2LFC)) != 0)
+ ;
+ out_be32(&l2cache->l2csr0, L2CSR0_L2E);
+ i++;
+ } while (!(cluster & TP_CLUSTER_EOC));
+
+ return 0;
+}
+#endif
+
/*
* Initialize L2 as cache.
*
@@ -306,7 +343,12 @@ int cpu_init_r(void)
{
__maybe_unused u32 svr = get_svr();
#ifdef CONFIG_SYS_LBC_LCRR
- volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
+ fsl_lbc_t *lbc = (void __iomem *)LBC_BASE_ADDR;
+#endif
+#ifdef CONFIG_L2_CACHE
+ ccsr_l2cache_t *l2cache = (void __iomem *)CONFIG_SYS_MPC85xx_L2_ADDR;
+#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
+ struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2;
#endif
#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
@@ -356,7 +398,6 @@ int cpu_init_r(void)
puts ("L2: ");
#if defined(CONFIG_L2_CACHE)
- volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
volatile uint cache_ctl;
uint ver;
u32 l2siz_field;
@@ -467,6 +508,11 @@ int cpu_init_r(void)
}
skip_l2:
+#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
+ if (l2cache->l2csr0 & L2CSR0_L2E)
+ printf("%d KB enabled\n", (l2cache->l2cfg0 & 0x3fff) * 64);
+
+ enable_cluster_l2();
#else
puts("disabled\n");
#endif
@@ -478,7 +524,7 @@ skip_l2:
#ifdef CONFIG_SYS_SRIO
srio_init();
-#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
char *s = getenv("bootmaster");
if (s) {
if (!strcmp(s, "SRIO1")) {
@@ -497,11 +543,13 @@ skip_l2:
setup_mp();
#endif
-#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC136
+#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC13
{
- void *p;
- p = (void *)CONFIG_SYS_DCSRBAR + 0x20520;
- setbits_be32(p, 1 << (31 - 14));
+ if (SVR_MAJ(svr) < 3) {
+ void *p;
+ p = (void *)CONFIG_SYS_DCSRBAR + 0x20520;
+ setbits_be32(p, 1 << (31 - 14));
+ }
}
#endif
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
index ca4ed62..f118dd5 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
@@ -18,12 +18,14 @@
void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
unsigned int ctrl_num)
{
- unsigned int i;
+ unsigned int i, bus_width;
volatile ccsr_ddr_t *ddr;
u32 temp_sdram_cfg;
+ u32 total_gb_size_per_controller;
+ int timeout;
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
+ int timeout_save;
volatile ccsr_local_ecm_t *ecm = (void *)CONFIG_SYS_MPC85xx_ECM_ADDR;
- u32 total_gb_size_per_controller;
unsigned int csn_bnds_backup = 0, cs_sa, cs_ea, *csn_bnds_t;
int csn = -1;
#endif
@@ -52,8 +54,8 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
return;
}
- out_be32(&ddr->eor, regs->ddr_eor);
-
+ if (regs->ddr_eor)
+ out_be32(&ddr->eor, regs->ddr_eor);
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
debug("Workaround for ERRATUM_DDR111_DDR134\n");
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
@@ -121,6 +123,11 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
+ if (regs->ddr_wrlvl_cntl_2)
+ out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2);
+ if (regs->ddr_wrlvl_cntl_3)
+ out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3);
+
out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr);
out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
@@ -134,6 +141,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
out_be32(&ddr->debug[i], regs->debug[i]);
}
}
+#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
+ out_be32(&ddr->debug[28], 0x00003000);
+#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474
out_be32(&ddr->debug[12], 0x00000015);
@@ -270,9 +280,48 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
asm volatile("sync;isync");
+ total_gb_size_per_controller = 0;
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ if (!(regs->cs[i].config & 0x80000000))
+ continue;
+ total_gb_size_per_controller += 1 << (
+ ((regs->cs[i].config >> 14) & 0x3) + 2 +
+ ((regs->cs[i].config >> 8) & 0x7) + 12 +
+ ((regs->cs[i].config >> 0) & 0x7) + 8 +
+ 3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) -
+ 26); /* minus 26 (count of 64M) */
+ }
+ if (fsl_ddr_get_intl3r() & 0x80000000) /* 3-way interleaving */
+ total_gb_size_per_controller *= 3;
+ else if (regs->cs[0].config & 0x20000000) /* 2-way interleaving */
+ total_gb_size_per_controller <<= 1;
+ /*
+ * total memory / bus width = transactions needed
+ * transactions needed / data rate = seconds
+ * to add plenty of buffer, double the time
+ * For example, 2GB on 666MT/s 64-bit bus takes about 402ms
+ * Let's wait for 800ms
+ */
+ bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK)
+ >> SDRAM_CFG_DBW_SHIFT);
+ timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 /
+ (get_ddr_freq(0) >> 20)) << 1;
+#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
+ timeout_save = timeout;
+#endif
+ total_gb_size_per_controller >>= 4; /* shift down to gb size */
+ debug("total %d GB\n", total_gb_size_per_controller);
+ debug("Need to wait up to %d * 10ms\n", timeout);
+
/* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */
- while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT)
+ while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
+ (timeout >= 0)) {
udelay(10000); /* throttle polling rate */
+ timeout--;
+ }
+
+ if (timeout <= 0)
+ printf("Waiting for D_INIT timeout. Memory may not work.\n");
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
/* continue this workaround */
@@ -330,23 +379,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
while (in_be32(&ddr->debug[1]) & 0x400)
udelay(10000); /* throttle polling rate */
- /* 7. Wait for 400ms/GB */
- total_gb_size_per_controller = 0;
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (i == csn) {
- total_gb_size_per_controller +=
- ((csn_bnds_backup & 0xFFFF) >> 6)
- - (csn_bnds_backup >> 22) + 1;
- } else {
- total_gb_size_per_controller +=
- ((regs->cs[i].bnds & 0xFFFF) >> 6)
- - (regs->cs[i].bnds >> 22) + 1;
- }
- }
- if (in_be32(&ddr->sdram_cfg) & 0x80000)
- total_gb_size_per_controller <<= 1;
- debug("Wait for %d ms\n", total_gb_size_per_controller * 400);
- udelay(total_gb_size_per_controller * 400000);
+ /* 7. Wait for state machine 2nd run, roughly 400ms/GB */
+ debug("Wait for %d * 10ms\n", timeout_save);
+ udelay(timeout_save * 10000);
/* 8. Set sdram_cfg_2[dinit] if options requires */
setbits_be32(&ddr->sdram_cfg_2,
@@ -354,8 +389,16 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2));
/* 9. Poll until dinit is cleared */
- while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT)
- udelay(10000);
+ timeout = timeout_save;
+ debug("Need to wait up to %d * 10ms\n", timeout);
+ while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
+ (timeout >= 0)) {
+ udelay(10000); /* throttle polling rate */
+ timeout--;
+ }
+
+ if (timeout <= 0)
+ printf("Waiting for D_INIT timeout. Memory may not work.\n");
/* 10. Clear EEBACR[3] */
clrbits_be32(&ecm->eebacr, 10000000);
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index a0a9b4c..ab09330 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -47,8 +47,8 @@ extern void ft_srio_setup(void *blob);
void ft_fixup_cpu(void *blob, u64 memory_limit)
{
int off;
- ulong spin_tbl_addr = get_spin_phys_addr();
- u32 bootpg = determine_mp_bootpg();
+ phys_addr_t spin_tbl_addr = get_spin_phys_addr();
+ u32 bootpg = determine_mp_bootpg(NULL);
u32 id = get_my_id();
const char *enable_method;
@@ -97,7 +97,16 @@ void ft_fixup_cpu(void *blob, u64 memory_limit)
if ((u64)bootpg < memory_limit) {
off = fdt_add_mem_rsv(blob, bootpg, (u64)4096);
if (off < 0)
- printf("%s: %s\n", __FUNCTION__, fdt_strerror(off));
+ printf("Failed to reserve memory for bootpg: %s\n",
+ fdt_strerror(off));
+ }
+ /* Reserve spin table page */
+ if (spin_tbl_addr < memory_limit) {
+ off = fdt_add_mem_rsv(blob,
+ (spin_tbl_addr & ~0xffful), 4096);
+ if (off < 0)
+ printf("Failed to reserve memory for spin table: %s\n",
+ fdt_strerror(off));
}
}
#endif
@@ -220,12 +229,19 @@ static inline void ft_fixup_l2cache(void *blob)
/* we dont bother w/L3 since no platform of this type has one */
}
-#elif defined(CONFIG_BACKSIDE_L2_CACHE)
+#elif defined(CONFIG_BACKSIDE_L2_CACHE) || \
+ defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
static inline void ft_fixup_l2cache(void *blob)
{
int off, l2_off, l3_off = -1;
u32 *ph;
+#ifdef CONFIG_BACKSIDE_L2_CACHE
u32 l2cfg0 = mfspr(SPRN_L2CFG0);
+#else
+ struct ccsr_cluster_l2 *l2cache =
+ (struct ccsr_cluster_l2 __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2);
+ u32 l2cfg0 = in_be32(&l2cache->l2cfg0);
+#endif
u32 size, line_size, num_ways, num_sets;
int has_l2 = 1;
@@ -257,7 +273,12 @@ static inline void ft_fixup_l2cache(void *blob)
if (has_l2) {
#ifdef CONFIG_SYS_CACHE_STASHING
u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ /* Only initialize every eighth thread */
+ if (reg && !((*reg) % 8))
+#else
if (reg)
+#endif
fdt_setprop_cell(blob, l2_off, "cache-stash-id",
(*reg * 2) + 32 + 1);
#endif
@@ -390,6 +411,11 @@ static void ft_fixup_dpaa_clks(void *blob)
#endif
#endif
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ do_fixup_by_compat_u32(blob, "fsl,qman",
+ "clock-frequency", sysinfo.freqQMAN, 1);
+#endif
+
#ifdef CONFIG_SYS_DPAA_PME
do_fixup_by_compat_u32(blob, "fsl,pme",
"clock-frequency", sysinfo.freqPME, 1);
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
new file mode 100644
index 0000000..01dcdf6
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/immap_85xx.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/fsl_law.h>
+#include <asm/errno.h>
+#include "fsl_corenet2_serdes.h"
+
+static u64 serdes1_prtcl_map;
+static u64 serdes2_prtcl_map;
+#ifdef CONFIG_SYS_FSL_SRDS_3
+static u64 serdes3_prtcl_map;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_4
+static u64 serdes4_prtcl_map;
+#endif
+
+#ifdef DEBUG
+static const char *serdes_prtcl_str[] = {
+ [NONE] = "NA",
+ [PCIE1] = "PCIE1",
+ [PCIE2] = "PCIE2",
+ [PCIE3] = "PCIE3",
+ [PCIE4] = "PCIE4",
+ [SATA1] = "SATA1",
+ [SATA2] = "SATA2",
+ [SRIO1] = "SRIO1",
+ [SRIO2] = "SRIO2",
+ [SGMII_FM1_DTSEC1] = "SGMII_FM1_DTSEC1",
+ [SGMII_FM1_DTSEC2] = "SGMII_FM1_DTSEC2",
+ [SGMII_FM1_DTSEC3] = "SGMII_FM1_DTSEC3",
+ [SGMII_FM1_DTSEC4] = "SGMII_FM1_DTSEC4",
+ [SGMII_FM1_DTSEC5] = "SGMII_FM1_DTSEC5",
+ [SGMII_FM1_DTSEC6] = "SGMII_FM1_DTSEC6",
+ [SGMII_FM2_DTSEC1] = "SGMII_FM2_DTSEC1",
+ [SGMII_FM2_DTSEC2] = "SGMII_FM2_DTSEC2",
+ [SGMII_FM2_DTSEC3] = "SGMII_FM2_DTSEC3",
+ [SGMII_FM2_DTSEC4] = "SGMII_FM2_DTSEC4",
+ [XAUI_FM1] = "XAUI_FM1",
+ [XAUI_FM2] = "XAUI_FM2",
+ [AURORA] = "DEBUG",
+ [CPRI1] = "CPRI1",
+ [CPRI2] = "CPRI2",
+ [CPRI3] = "CPRI3",
+ [CPRI4] = "CPRI4",
+ [CPRI5] = "CPRI5",
+ [CPRI6] = "CPRI6",
+ [CPRI7] = "CPRI7",
+ [CPRI8] = "CPRI8",
+ [XAUI_FM1_MAC9] = "XAUI_FM1_MAC9",
+ [XAUI_FM1_MAC10] = "XAUI_FM1_MAC10",
+ [XAUI_FM2_MAC9] = "XAUI_FM2_MAC9",
+ [XAUI_FM2_MAC10] = "XAUI_FM2_MAC10",
+ [HIGIG_FM1_MAC9] = "HiGig_FM1_MAC9",
+ [HIGIG_FM1_MAC10] = "HiGig_FM1_MAC10",
+ [HIGIG_FM2_MAC9] = "HiGig_FM2_MAC9",
+ [HIGIG_FM2_MAC10] = "HiGig_FM2_MAC10",
+ [QSGMII_FM1_A] = "QSGMII_FM1_A",
+ [QSGMII_FM1_B] = "QSGMII_FM1_B",
+ [QSGMII_FM2_A] = "QSGMII_FM2_A",
+ [QSGMII_FM2_B] = "QSGMII_FM2_B",
+ [XFI_FM1_MAC9] = "XFI_FM1_MAC9",
+ [XFI_FM1_MAC10] = "XFI_FM1_MAC10",
+ [XFI_FM2_MAC9] = "XFI_FM2_MAC9",
+ [XFI_FM2_MAC10] = "XFI_FM2_MAC10",
+ [INTERLAKEN] = "INTERLAKEN",
+};
+#endif
+
+int is_serdes_configured(enum srds_prtcl device)
+{
+ u64 ret = 0;
+
+ ret |= (1ULL << device) & serdes1_prtcl_map;
+ ret |= (1ULL << device) & serdes2_prtcl_map;
+#ifdef CONFIG_SYS_FSL_SRDS_3
+ ret |= (1ULL << device) & serdes3_prtcl_map;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_4
+ ret |= (1ULL << device) & serdes4_prtcl_map;
+#endif
+
+ return !!ret;
+}
+
+int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
+{
+ const ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 cfg = in_be32(&gur->rcwsr[4]);
+ int i;
+
+ switch (sd) {
+ case FSL_SRDS_1:
+ cfg &= FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+ cfg >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+ break;
+ case FSL_SRDS_2:
+ cfg &= FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+ cfg >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+ break;
+#ifdef CONFIG_SYS_FSL_SRDS_3
+ case FSL_SRDS_3:
+ cfg &= FSL_CORENET2_RCWSR4_SRDS3_PRTCL;
+ cfg >>= FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT;
+ break;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_4
+ case FSL_SRDS_4:
+ cfg &= FSL_CORENET2_RCWSR4_SRDS4_PRTCL;
+ cfg >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT;
+ break;
+#endif
+ default:
+ printf("invalid SerDes%d\n", sd);
+ break;
+ }
+ /* Is serdes enabled at all? */
+ if (unlikely(cfg == 0))
+ return -ENODEV;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (serdes_get_prtcl(sd, cfg, i) == device)
+ return i;
+ }
+
+ return -ENODEV;
+}
+
+u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift)
+{
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u64 serdes_prtcl_map = 0;
+ u32 cfg;
+ int lane;
+
+ cfg = in_be32(&gur->rcwsr[4]) & sd_prctl_mask;
+ /* Is serdes enabled at all? */
+ if (!cfg) {
+ printf("SERDES%d is not enabled\n", sd + 1);
+ return 0;
+ }
+
+ cfg >>= sd_prctl_shift;
+ printf("Using SERDES%d Protocol: 0x%x\n", sd + 1, cfg);
+ if (!is_serdes_prtcl_valid(sd, cfg))
+ printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg);
+
+ for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
+ enum srds_prtcl lane_prtcl = serdes_get_prtcl(sd, cfg, lane);
+ serdes_prtcl_map |= (1ULL << lane_prtcl);
+ }
+
+ return serdes_prtcl_map;
+}
+
+void fsl_serdes_init(void)
+{
+
+ serdes1_prtcl_map = serdes_init(FSL_SRDS_1,
+ CONFIG_SYS_FSL_CORENET_SERDES_ADDR,
+ FSL_CORENET2_RCWSR4_SRDS1_PRTCL,
+ FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT);
+ serdes2_prtcl_map = serdes_init(FSL_SRDS_2,
+ CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_2 * 0x1000,
+ FSL_CORENET2_RCWSR4_SRDS2_PRTCL,
+ FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT);
+#ifdef CONFIG_SYS_FSL_SRDS_3
+ serdes3_prtcl_map = serdes_init(FSL_SRDS_3,
+ CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_3 * 0x1000,
+ FSL_CORENET2_RCWSR4_SRDS3_PRTCL,
+ FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT);
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_4
+ serdes4_prtcl_map = serdes_init(FSL_SRDS_4,
+ CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_4 * 0x1000,
+ FSL_CORENET2_RCWSR4_SRDS4_PRTCL,
+ FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT);
+#endif
+
+}
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h
new file mode 100644
index 0000000..2258f41
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __FSL_CORENET2_SERDES_H
+#define __FSL_CORENET2_SERDES_H
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl);
+int serdes_lane_enabled(int lane);
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane);
+#endif /* __FSL_CORENET2_SERDES_H */
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
index 2a68060..e6b1b1b 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
@@ -92,10 +92,17 @@ static const struct {
{ 17, 163, FSL_SRDS_BANK_2 },
{ 18, 164, FSL_SRDS_BANK_2 },
{ 19, 165, FSL_SRDS_BANK_2 },
+#ifdef CONFIG_PPC_P4080
{ 20, 170, FSL_SRDS_BANK_3 },
{ 21, 171, FSL_SRDS_BANK_3 },
{ 22, 172, FSL_SRDS_BANK_3 },
{ 23, 173, FSL_SRDS_BANK_3 },
+#else
+ { 20, 166, FSL_SRDS_BANK_3 },
+ { 21, 167, FSL_SRDS_BANK_3 },
+ { 22, 168, FSL_SRDS_BANK_3 },
+ { 23, 169, FSL_SRDS_BANK_3 },
+#endif
};
int serdes_get_lane_idx(int lane)
@@ -493,6 +500,9 @@ void fsl_serdes_init(void)
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
int cfg;
serdes_corenet_t *srds_regs;
+#ifdef CONFIG_PPC_P5040
+ serdes_corenet_t *srds2_regs;
+#endif
int lane, bank, idx;
int have_bank[SRDS_MAX_BANK] = {};
#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
@@ -574,6 +584,34 @@ void fsl_serdes_init(void)
}
}
+#ifdef CONFIG_PPC_P5040
+ /*
+ * Lanes on bank 4 on P5040 are commented-out, but for some SERDES
+ * protocols, these lanes are routed to SATA. We use serdes_prtcl_map
+ * to decide whether a protocol is supported on a given lane, so SATA
+ * will be identified as not supported, and therefore not initialized.
+ * So for protocols which use SATA on bank4, we add SATA support in
+ * serdes_prtcl_map.
+ */
+ switch (cfg) {
+ case 0x0:
+ case 0x1:
+ case 0x2:
+ case 0x3:
+ case 0x4:
+ case 0x5:
+ case 0x6:
+ case 0x7:
+ serdes_prtcl_map |= 1 << SATA1 | 1 << SATA2;
+ break;
+ default:
+ srds2_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES2_ADDR;
+
+ /* We don't need bank 4, so power it down */
+ setbits_be32(&srds2_regs->bank[0].rstctl, SRDS_RSTCTL_SDPD);
+ }
+#endif
+
soc_serdes_init();
#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
@@ -617,6 +655,38 @@ void fsl_serdes_init(void)
}
}
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004699
+ /*
+ * To avoid the situation that resulted in the P4080 erratum
+ * SERDES-8, a given SerDes bank will use the PLLs from the previous
+ * bank if one of the PLL frequencies is a multiple of the other. For
+ * instance, if bank 3 is running at 2.5GHz and bank 2 is at 1.25GHz,
+ * then bank 3 will use bank 2's PLL. P5040 Erratum A-004699 says
+ * that, in this situation, lane synchronization is not initiated. So
+ * when we detect a bank with a "borrowed" PLL, we have to manually
+ * initiate lane synchronization.
+ */
+ for (bank = FSL_SRDS_BANK_2; bank <= FSL_SRDS_BANK_3; bank++) {
+ /* Determine the first lane for this bank */
+ unsigned int lane;
+
+ for (lane = 0; lane < SRDS_MAX_LANES; lane++)
+ if (lanes[lane].bank == bank)
+ break;
+ idx = lanes[lane].idx;
+
+ /*
+ * Check if the PLL for the bank is borrowed. The UOTHL
+ * bit of the first lane will tell us that.
+ */
+ if (in_be32(&srds_regs->lane[idx].gcr0) & SRDS_GCR0_UOTHL) {
+ /* Manually start lane synchronization */
+ setbits_be32(&srds_regs->bank[bank].pllcr0,
+ SRDS_PLLCR0_PVCOCNT_EN);
+ }
+ }
+#endif
+
#if defined(CONFIG_SYS_P4080_ERRATUM_SERDES8) || defined (CONFIG_SYS_P4080_ERRATUM_SERDES9)
for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
enum srds_prtcl lane_prtcl;
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h
index f261351..3c551e9 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h
@@ -22,9 +22,6 @@
#ifndef __FSL_CORENET_SERDES_H
#define __FSL_CORENET_SERDES_H
-#define SRDS_MAX_LANES 18
-#define SRDS_MAX_BANK 3
-
enum srds_bank {
FSL_SRDS_BANK_1 = 0,
FSL_SRDS_BANK_2 = 1,
diff --git a/arch/powerpc/cpu/mpc85xx/liodn.c b/arch/powerpc/cpu/mpc85xx/liodn.c
index 11881c9..2e53367 100644
--- a/arch/powerpc/cpu/mpc85xx/liodn.c
+++ b/arch/powerpc/cpu/mpc85xx/liodn.c
@@ -40,6 +40,7 @@ int get_dpaa_liodn(enum fsl_dpaa_dev dpaa_dev, u32 *liodns, int liodn_offset)
return liodn_bases[dpaa_dev].num_ids;
}
+#ifdef CONFIG_SYS_SRIO
static void set_srio_liodn(struct srio_liodn_id_table *tbl, int size)
{
int i;
@@ -54,6 +55,7 @@ static void set_srio_liodn(struct srio_liodn_id_table *tbl, int size)
}
}
}
+#endif
static void set_liodn(struct liodn_id_table *tbl, int size)
{
@@ -181,8 +183,10 @@ void set_liodns(void)
/* setup general liodn offsets */
set_liodn(liodn_tbl, liodn_tbl_sz);
+#ifdef CONFIG_SYS_SRIO
/* setup SRIO port liodns */
set_srio_liodn(srio_liodn_tbl, srio_liodn_tbl_sz);
+#endif
/* setup SEC block liodn bases & offsets if we have one */
if (IS_E_PROCESSOR(get_svr())) {
@@ -219,6 +223,7 @@ void set_liodns(void)
#endif
}
+#ifdef CONFIG_SYS_SRIO
static void fdt_fixup_srio_liodn(void *blob, struct srio_liodn_id_table *tbl)
{
int i, srio_off;
@@ -247,6 +252,57 @@ static void fdt_fixup_srio_liodn(void *blob, struct srio_liodn_id_table *tbl)
}
}
}
+#endif
+
+#define CONFIG_SYS_MAX_PCI_EPS 8
+#define CONFIG_SYS_PCI_EP_LIODN_START 256
+
+static void fdt_fixup_pci_liodn_offsets(void *fdt, const char *compat)
+{
+ int off, pci_idx = 0, pci_cnt = 0, i, rc;
+ const uint32_t *base_liodn;
+ uint32_t liodn_offs[CONFIG_SYS_MAX_PCI_EPS + 1] = { 0 };
+
+ /*
+ * Count the number of pci nodes.
+ * It's needed later when the interleaved liodn offsets are generated.
+ */
+ off = fdt_node_offset_by_compatible(fdt, -1, compat);
+ while (off != -FDT_ERR_NOTFOUND) {
+ pci_cnt++;
+ off = fdt_node_offset_by_compatible(fdt, off, compat);
+ }
+
+ for (off = fdt_node_offset_by_compatible(fdt, -1, compat);
+ off != -FDT_ERR_NOTFOUND;
+ off = fdt_node_offset_by_compatible(fdt, off, compat)) {
+ base_liodn = fdt_getprop(fdt, off, "fsl,liodn", &rc);
+ if (!base_liodn) {
+ char path[64];
+
+ if (fdt_get_path(fdt, off, path, sizeof(path)) < 0)
+ strcpy(path, "(unknown)");
+ printf("WARNING Could not get liodn of node %s: %s\n",
+ path, fdt_strerror(rc));
+ continue;
+ }
+ for (i = 0; i < CONFIG_SYS_MAX_PCI_EPS; i++)
+ liodn_offs[i + 1] = CONFIG_SYS_PCI_EP_LIODN_START +
+ i * pci_cnt + pci_idx - *base_liodn;
+ rc = fdt_setprop(fdt, off, "fsl,liodn-offset-list",
+ liodn_offs, sizeof(liodn_offs));
+ if (rc) {
+ char path[64];
+
+ if (fdt_get_path(fdt, off, path, sizeof(path)) < 0)
+ strcpy(path, "(unknown)");
+ printf("WARNING Unable to set fsl,liodn-offset-list for "
+ "node %s: %s\n", path, fdt_strerror(rc));
+ continue;
+ }
+ pci_idx++;
+ }
+}
static void fdt_fixup_liodn_tbl(void *blob, struct liodn_id_table *tbl, int sz)
{
@@ -277,7 +333,9 @@ static void fdt_fixup_liodn_tbl(void *blob, struct liodn_id_table *tbl, int sz)
void fdt_fixup_liodn(void *blob)
{
+#ifdef CONFIG_SYS_SRIO
fdt_fixup_srio_liodn(blob, srio_liodn_tbl);
+#endif
fdt_fixup_liodn_tbl(blob, liodn_tbl, liodn_tbl_sz);
#ifdef CONFIG_SYS_DPAA_FMAN
@@ -295,4 +353,6 @@ void fdt_fixup_liodn(void *blob)
#ifdef CONFIG_SYS_DPAA_RMAN
fdt_fixup_liodn_tbl(blob, rman_liodn_tbl, rman_liodn_tbl_sz);
#endif
+
+ fdt_fixup_pci_liodn_offsets(blob, "fsl,qoriq-pcie-v2.4");
}
diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c
index ffc2a9a..e1197ac 100644
--- a/arch/powerpc/cpu/mpc85xx/mp.c
+++ b/arch/powerpc/cpu/mpc85xx/mp.c
@@ -27,9 +27,13 @@
#include <asm/io.h>
#include <asm/mmu.h>
#include <asm/fsl_law.h>
+#include <asm/fsl_ddr_sdram.h>
#include "mp.h"
DECLARE_GLOBAL_DATA_PTR;
+u32 fsl_ddr_get_intl3r(void);
+
+extern u32 __spin_table[];
u32 get_my_id()
{
@@ -76,17 +80,16 @@ int cpu_status(int nr)
return 0;
if (nr == id) {
- table = (u32 *)get_spin_virt_addr();
+ table = (u32 *)&__spin_table;
printf("table base @ 0x%p\n", table);
} else {
- table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY;
+ table = (u32 *)&__spin_table + nr * NUM_BOOT_ENTRY;
printf("Running on cpu %d\n", id);
printf("\n");
printf("table @ 0x%p\n", table);
printf(" addr - 0x%08x\n", table[BOOT_ENTRY_ADDR_LOWER]);
- printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]);
printf(" r3 - 0x%08x\n", table[BOOT_ENTRY_R3_LOWER]);
- printf(" r6 - 0x%08x\n", table[BOOT_ENTRY_R6_LOWER]);
+ printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]);
}
return 0;
@@ -149,12 +152,11 @@ static u8 boot_entry_map[4] = {
0,
BOOT_ENTRY_PIR,
BOOT_ENTRY_R3_LOWER,
- BOOT_ENTRY_R6_LOWER,
};
int cpu_release(int nr, int argc, char * const argv[])
{
- u32 i, val, *table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY;
+ u32 i, val, *table = (u32 *)&__spin_table + nr * NUM_BOOT_ENTRY;
u64 boot_addr;
if (hold_cores_in_reset(1))
@@ -172,8 +174,8 @@ int cpu_release(int nr, int argc, char * const argv[])
boot_addr = simple_strtoull(argv[0], NULL, 16);
- /* handle pir, r3, r6 */
- for (i = 1; i < 4; i++) {
+ /* handle pir, r3 */
+ for (i = 1; i < 3; i++) {
if (argv[i][0] != '-') {
u8 entry = boot_entry_map[i];
val = simple_strtoul(argv[i], NULL, 16);
@@ -191,38 +193,80 @@ int cpu_release(int nr, int argc, char * const argv[])
return 0;
}
-u32 determine_mp_bootpg(void)
+u32 determine_mp_bootpg(unsigned int *pagesize)
{
- /* if we have 4G or more of memory, put the boot page at 4Gb-4k */
- if ((u64)gd->ram_size > 0xfffff000)
- return (0xfffff000);
+ u32 bootpg;
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004468
+ u32 svr = get_svr();
+ u32 granule_size, check;
+ struct law_entry e;
+#endif
- return (gd->ram_size - 4096);
-}
-ulong get_spin_phys_addr(void)
-{
- extern ulong __secondary_start_page;
- extern ulong __spin_table;
+ /* use last 4K of mapped memory */
+ bootpg = ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ?
+ CONFIG_MAX_MEM_MAPPED : gd->ram_size) +
+ CONFIG_SYS_SDRAM_BASE - 4096;
+ if (pagesize)
+ *pagesize = 4096;
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004468
+/*
+ * Erratum A004468 has two parts. The 3-way interleaving applies to T4240,
+ * to be fixed in rev 2.0. The 2-way interleaving applies to many SoCs. But
+ * the way boot page chosen in u-boot avoids hitting this erratum. So only
+ * thw workaround for 3-way interleaving is needed.
+ *
+ * To make sure boot page translation works with 3-Way DDR interleaving
+ * enforce a check for the following constrains
+ * 8K granule size requires BRSIZE=8K and
+ * bootpg >> log2(BRSIZE) %3 == 1
+ * 4K and 1K granule size requires BRSIZE=4K and
+ * bootpg >> log2(BRSIZE) %3 == 0
+ */
+ if (SVR_SOC_VER(svr) == SVR_T4240 && SVR_MAJ(svr) < 2) {
+ e = find_law(bootpg);
+ switch (e.trgt_id) {
+ case LAW_TRGT_IF_DDR_INTLV_123:
+ granule_size = fsl_ddr_get_intl3r() & 0x1f;
+ if (granule_size == FSL_DDR_3WAY_8KB_INTERLEAVING) {
+ if (pagesize)
+ *pagesize = 8192;
+ bootpg &= 0xffffe000; /* align to 8KB */
+ check = bootpg >> 13;
+ while ((check % 3) != 1)
+ check--;
+ bootpg = check << 13;
+ debug("Boot page (8K) at 0x%08x\n", bootpg);
+ break;
+ } else {
+ bootpg &= 0xfffff000; /* align to 4KB */
+ check = bootpg >> 12;
+ while ((check % 3) != 0)
+ check--;
+ bootpg = check << 12;
+ debug("Boot page (4K) at 0x%08x\n", bootpg);
+ }
+ break;
+ default:
+ break;
+ }
+ }
+#endif /* CONFIG_SYS_FSL_ERRATUM_A004468 */
- return (determine_mp_bootpg() +
- (ulong)&__spin_table - (ulong)&__secondary_start_page);
+ return bootpg;
}
-ulong get_spin_virt_addr(void)
+phys_addr_t get_spin_phys_addr(void)
{
- extern ulong __secondary_start_page;
- extern ulong __spin_table;
-
- return (CONFIG_BPTR_VIRT_ADDR +
- (ulong)&__spin_table - (ulong)&__secondary_start_page);
+ return virt_to_phys(&__spin_table);
}
#ifdef CONFIG_FSL_CORENET
-static void plat_mp_up(unsigned long bootpg)
+static void plat_mp_up(unsigned long bootpg, unsigned int pagesize)
{
- u32 cpu_up_mask, whoami;
- u32 *table = (u32 *)get_spin_virt_addr();
+ u32 cpu_up_mask, whoami, brsize = LAW_SIZE_4K;
+ u32 *table = (u32 *)&__spin_table;
volatile ccsr_gur_t *gur;
volatile ccsr_local_t *ccm;
volatile ccsr_rcpm_t *rcpm;
@@ -241,7 +285,11 @@ static void plat_mp_up(unsigned long bootpg)
out_be32(&ccm->bstrl, bootpg);
e = find_law(bootpg);
- out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | LAW_SIZE_4K);
+ /* pagesize is only 4K or 8K */
+ if (pagesize == 8192)
+ brsize = LAW_SIZE_8K;
+ out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | brsize);
+ debug("BRSIZE is 0x%x\n", brsize);
/* readback to sync write */
in_be32(&ccm->bstrar);
@@ -294,10 +342,10 @@ static void plat_mp_up(unsigned long bootpg)
#endif
}
#else
-static void plat_mp_up(unsigned long bootpg)
+static void plat_mp_up(unsigned long bootpg, unsigned int pagesize)
{
u32 up, cpu_up_mask, whoami;
- u32 *table = (u32 *)get_spin_virt_addr();
+ u32 *table = (u32 *)&__spin_table;
volatile u32 bpcr;
volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
@@ -374,27 +422,52 @@ static void plat_mp_up(unsigned long bootpg)
void cpu_mp_lmb_reserve(struct lmb *lmb)
{
- u32 bootpg = determine_mp_bootpg();
+ u32 bootpg = determine_mp_bootpg(NULL);
lmb_reserve(lmb, bootpg, 4096);
}
void setup_mp(void)
{
- extern ulong __secondary_start_page;
- extern ulong __bootpg_addr;
- ulong fixup = (ulong)&__secondary_start_page;
- u32 bootpg = determine_mp_bootpg();
+ extern u32 __secondary_start_page;
+ extern u32 __bootpg_addr, __spin_table_addr, __second_half_boot_page;
+
+ int i;
+ ulong fixup = (u32)&__secondary_start_page;
+ u32 bootpg, bootpg_map, pagesize;
+
+ bootpg = determine_mp_bootpg(&pagesize);
+
+ /*
+ * pagesize is only 4K or 8K
+ * we only use the last 4K of boot page
+ * bootpg_map saves the address for the boot page
+ * 8K is used for the workaround of 3-way DDR interleaving
+ */
+
+ bootpg_map = bootpg;
+
+ if (pagesize == 8192)
+ bootpg += 4096; /* use 2nd half */
/* Some OSes expect secondary cores to be held in reset */
if (hold_cores_in_reset(0))
return;
- /* Store the bootpg's SDRAM address for use by secondary CPU cores */
- __bootpg_addr = bootpg;
+ /*
+ * Store the bootpg's cache-able half address for use by secondary
+ * CPU cores to continue to boot
+ */
+ __bootpg_addr = (u32)virt_to_phys(&__second_half_boot_page);
+
+ /* Store spin table's physical address for use by secondary cores */
+ __spin_table_addr = (u32)get_spin_phys_addr();
+
+ /* flush bootpg it before copying invalidate any staled cacheline */
+ flush_cache(bootpg, 4096);
/* look for the tlb covering the reset page, there better be one */
- int i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1);
+ i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1);
/* we found a match */
if (i != -1) {
@@ -407,7 +480,7 @@ void setup_mp(void)
memcpy((void *)CONFIG_BPTR_VIRT_ADDR, (void *)fixup, 4096);
- plat_mp_up(bootpg);
+ plat_mp_up(bootpg_map, pagesize);
} else {
puts("WARNING: No reset page TLB. "
"Skipping secondary core setup\n");
diff --git a/arch/powerpc/cpu/mpc85xx/mp.h b/arch/powerpc/cpu/mpc85xx/mp.h
index 87bac37..ad9950b 100644
--- a/arch/powerpc/cpu/mpc85xx/mp.h
+++ b/arch/powerpc/cpu/mpc85xx/mp.h
@@ -3,8 +3,7 @@
#include <asm/mp.h>
-ulong get_spin_phys_addr(void);
-ulong get_spin_virt_addr(void);
+phys_addr_t get_spin_phys_addr(void);
u32 get_my_id(void);
int hold_cores_in_reset(int verbose);
@@ -16,7 +15,7 @@ int hold_cores_in_reset(int verbose);
#define BOOT_ENTRY_PIR 5
#define BOOT_ENTRY_R6_UPPER 6
#define BOOT_ENTRY_R6_LOWER 7
-#define NUM_BOOT_ENTRY 8
+#define NUM_BOOT_ENTRY 16 /* pad to 64 bytes */
#define SIZE_BOOT_ENTRY (NUM_BOOT_ENTRY * sizeof(u32))
#endif
diff --git a/arch/powerpc/cpu/mpc85xx/p5040_ids.c b/arch/powerpc/cpu/mpc85xx/p5040_ids.c
new file mode 100644
index 0000000..878ee3e
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/p5040_ids.c
@@ -0,0 +1,127 @@
+/*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+ /* dqrr liodn, frame data liodn, liodn off, sdest */
+ SET_QP_INFO(1, 2, 1, 0),
+ SET_QP_INFO(3, 4, 2, 1),
+ SET_QP_INFO(5, 6, 3, 2),
+ SET_QP_INFO(7, 8, 4, 3),
+ SET_QP_INFO(9, 10, 5, 0),
+ SET_QP_INFO(11, 12, 6, 1),
+ SET_QP_INFO(13, 14, 7, 2),
+ SET_QP_INFO(15, 16, 8, 3),
+ SET_QP_INFO(17, 18, 9, 0), /* for now, set sdest to 0 */
+ SET_QP_INFO(19, 20, 10, 0), /* for now, set sdest to 0 */
+};
+#endif
+
+struct liodn_id_table liodn_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ SET_QMAN_LIODN(31),
+ SET_BMAN_LIODN(32),
+#endif
+
+ SET_SDHC_LIODN(1, 64),
+
+ SET_USB_LIODN(1, "fsl-usb2-mph", 93),
+ SET_USB_LIODN(2, "fsl-usb2-dr", 94),
+
+ SET_SATA_LIODN(1, 95),
+ SET_SATA_LIODN(2, 96),
+
+ SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 195),
+ SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 196),
+ SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 197),
+
+ SET_DMA_LIODN(1, 193),
+ SET_DMA_LIODN(2, 194),
+};
+int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct liodn_id_table fman1_liodn_tbl[] = {
+ SET_FMAN_RX_1G_LIODN(1, 0, 6),
+ SET_FMAN_RX_1G_LIODN(1, 1, 7),
+ SET_FMAN_RX_1G_LIODN(1, 2, 8),
+ SET_FMAN_RX_1G_LIODN(1, 3, 9),
+ SET_FMAN_RX_1G_LIODN(1, 4, 10),
+ SET_FMAN_RX_10G_LIODN(1, 0, 11),
+};
+int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
+
+#if (CONFIG_SYS_NUM_FMAN == 2)
+struct liodn_id_table fman2_liodn_tbl[] = {
+ SET_FMAN_RX_1G_LIODN(2, 0, 12),
+ SET_FMAN_RX_1G_LIODN(2, 1, 13),
+ SET_FMAN_RX_1G_LIODN(2, 2, 14),
+ SET_FMAN_RX_1G_LIODN(2, 3, 15),
+ SET_FMAN_RX_1G_LIODN(2, 4, 16),
+ SET_FMAN_RX_10G_LIODN(2, 0, 17),
+};
+int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl);
+#endif
+#endif
+
+struct liodn_id_table sec_liodn_tbl[] = {
+ SET_SEC_JR_LIODN_ENTRY(0, 129, 130),
+ SET_SEC_JR_LIODN_ENTRY(1, 131, 132),
+ SET_SEC_JR_LIODN_ENTRY(2, 133, 134),
+ SET_SEC_JR_LIODN_ENTRY(3, 135, 136),
+ SET_SEC_RTIC_LIODN_ENTRY(a, 89),
+ SET_SEC_RTIC_LIODN_ENTRY(b, 90),
+ SET_SEC_RTIC_LIODN_ENTRY(c, 91),
+ SET_SEC_RTIC_LIODN_ENTRY(d, 92),
+ SET_SEC_DECO_LIODN_ENTRY(0, 139, 140),
+ SET_SEC_DECO_LIODN_ENTRY(1, 141, 142),
+ SET_SEC_DECO_LIODN_ENTRY(2, 143, 144),
+ SET_SEC_DECO_LIODN_ENTRY(3, 145, 146),
+};
+int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
+
+#ifdef CONFIG_SYS_FSL_RAID_ENGINE
+struct liodn_id_table raide_liodn_tbl[] = {
+ SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 0, 60),
+ SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 1, 61),
+ SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 0, 62),
+ SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 1, 63),
+};
+int raide_liodn_tbl_sz = ARRAY_SIZE(raide_liodn_tbl);
+#endif
+
+struct liodn_id_table liodn_bases[] = {
+ [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(64, 101),
+#ifdef CONFIG_SYS_DPAA_FMAN
+ [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(32),
+#endif
+#if (CONFIG_SYS_NUM_FMAN == 2)
+ [FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(160),
+#endif
+#ifdef CONFIG_SYS_FSL_RAID_ENGINE
+ [FSL_HW_PORTAL_RAID_ENGINE] = SET_LIODN_BASE_1(49),
+#endif
+};
diff --git a/arch/powerpc/cpu/mpc85xx/p5040_serdes.c b/arch/powerpc/cpu/mpc85xx/p5040_serdes.c
new file mode 100644
index 0000000..890b88e
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/p5040_serdes.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include "fsl_corenet_serdes.h"
+
+/*
+ * Note: For P5040, the fourth SerDes bank (with two lanes) is on SerDes2, but
+ * U-boot only supports one SerDes controller. Therefore, we ignore bank 4 in
+ * this table. This works because most of the SerDes code is for errata
+ * work-arounds, and there are no P5040 errata that effect bank 4.
+ */
+
+static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = {
+ [0x00] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, /* SATA1, SATA2, */ },
+ [0x01] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2,
+ SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, XAUI_FM1, XAUI_FM1,
+ XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, XAUI_FM2,
+ XAUI_FM2, /* SATA1, SATA2 */ },
+ [0x02] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SGMII_FM1_DTSEC3,
+ SGMII_FM1_DTSEC4, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4,
+ XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2,
+ XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ },
+ [0x03] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SGMII_FM2_DTSEC1,
+ SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3,
+ SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2,
+ /* SATA1, SATA2 */ },
+ [0x04] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE3, SGMII_FM2_DTSEC1,
+ SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3,
+ SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2,
+ /* SATA1, SATA2 */ },
+ [0x05] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE3, SGMII_FM1_DTSEC3,
+ SGMII_FM1_DTSEC4, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4,
+ XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2,
+ XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ },
+ [0x06] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ },
+ [0x07] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1,
+ SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, XAUI_FM1, XAUI_FM1,
+ XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, XAUI_FM2,
+ XAUI_FM2, /* SATA1, SATA2 */ },
+ [0x11] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2,
+ AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, NONE, NONE, SATA1, SATA2,
+ /* NONE, NONE */ },
+ [0x15] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2,
+ AURORA, AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1,
+ NONE, NONE, SATA1, SATA2, /* NONE, NONE */ },
+ [0x2a] = {PCIE1, PCIE1, PCIE3, PCIE3, PCIE2, PCIE2, PCIE2, PCIE2,
+ AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2,
+ XAUI_FM2, XAUI_FM2, /* NONE, NONE */ },
+ [0x34] = {PCIE1, PCIE1, PCIE1, PCIE1, SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA,
+ AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE,
+ NONE, SATA1, SATA2, /* NONE, NONE */ },
+ [0x35] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, AURORA, XAUI_FM1,
+ XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, NONE, SATA1, SATA2,
+ /* NONE, NONE */ },
+ [0x36] = {PCIE1, PCIE1, PCIE3, PCIE3, SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA,
+ AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE,
+ NONE, SATA1, SATA2, /* NONE, NONE */ },
+};
+
+enum srds_prtcl serdes_get_prtcl(int cfg, int lane)
+{
+ if (!serdes_lane_enabled(lane))
+ return NONE;
+
+ return serdes_cfg_tbl[cfg][lane];
+}
+
+int is_serdes_prtcl_valid(u32 prtcl)
+{
+ int i;
+
+ if (prtcl > ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (serdes_cfg_tbl[prtcl][i] != NONE)
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/arch/powerpc/cpu/mpc85xx/portals.c b/arch/powerpc/cpu/mpc85xx/portals.c
index 6199633..b59ef69 100644
--- a/arch/powerpc/cpu/mpc85xx/portals.c
+++ b/arch/powerpc/cpu/mpc85xx/portals.c
@@ -182,14 +182,18 @@ void fdt_fixup_qportals(void *blob)
{
int off, err;
unsigned int maj, min;
+ unsigned int ip_cfg;
u32 rev_1 = in_be32(&qman->ip_rev_1);
+ u32 rev_2 = in_be32(&qman->ip_rev_2);
char compat[64];
int compat_len;
maj = (rev_1 >> 8) & 0xff;
min = rev_1 & 0xff;
+ ip_cfg = rev_2 & 0xff;
- compat_len = sprintf(compat, "fsl,qman-portal-%u.%u", maj, min) + 1;
+ compat_len = sprintf(compat, "fsl,qman-portal-%u.%u.%u",
+ maj, min, ip_cfg) + 1;
compat_len += sprintf(compat + compat_len, "fsl,qman-portal") + 1;
off = fdt_node_offset_by_compatible(blob, -1, "fsl,qman-portal");
@@ -267,14 +271,19 @@ void fdt_fixup_bportals(void *blob)
{
int off, err;
unsigned int maj, min;
+ unsigned int ip_cfg;
u32 rev_1 = in_be32(&bman->ip_rev_1);
+ u32 rev_2 = in_be32(&bman->ip_rev_2);
char compat[64];
int compat_len;
maj = (rev_1 >> 8) & 0xff;
min = rev_1 & 0xff;
- compat_len = sprintf(compat, "fsl,bman-portal-%u.%u", maj, min) + 1;
+ ip_cfg = rev_2 & 0xff;
+
+ compat_len = sprintf(compat, "fsl,bman-portal-%u.%u.%u",
+ maj, min, ip_cfg) + 1;
compat_len += sprintf(compat + compat_len, "fsl,bman-portal") + 1;
off = fdt_node_offset_by_compatible(blob, -1, "fsl,bman-portal");
diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S
index 22e73e0..4ba44a9 100644
--- a/arch/powerpc/cpu/mpc85xx/release.S
+++ b/arch/powerpc/cpu/mpc85xx/release.S
@@ -150,29 +150,33 @@ __secondary_start_page:
#define toreset(x) (x - __secondary_start_page + 0xfffff000)
/* get our PIR to figure out our table entry */
- lis r3,toreset(__spin_table)@h
- ori r3,r3,toreset(__spin_table)@l
+ lis r3,toreset(__spin_table_addr)@h
+ ori r3,r3,toreset(__spin_table_addr)@l
+ lwz r3,0(r3)
- /* r10 has the base address for the entry */
+ /*
+ * r10 has the base address for the entry.
+ * we cannot access it yet before setting up a new TLB
+ */
mfspr r0,SPRN_PIR
#if defined(CONFIG_E6500)
/*
* PIR definition for E6500
* 0-17 Reserved (logic 0s)
- * 8-19 CHIP_ID, 2’b00 - SoC 1
+ * 8-19 CHIP_ID, 2'b00 - SoC 1
* all others - reserved
- * 20-24 CLUSTER_ID 5’b00000 - CCM 1
+ * 20-24 CLUSTER_ID 5'b00000 - CCM 1
* all others - reserved
- * 25-26 CORE_CLUSTER_ID 2’b00 - cluster 1
- * 2’b01 - cluster 2
- * 2’b10 - cluster 3
- * 2’b11 - cluster 4
- * 27-28 CORE_ID 2’b00 - core 0
- * 2’b01 - core 1
- * 2’b10 - core 2
- * 2’b11 - core 3
- * 29-31 THREAD_ID 3’b000 - thread 0
- * 3’b001 - thread 1
+ * 25-26 CORE_CLUSTER_ID 2'b00 - cluster 1
+ * 2'b01 - cluster 2
+ * 2'b10 - cluster 3
+ * 2'b11 - cluster 4
+ * 27-28 CORE_ID 2'b00 - core 0
+ * 2'b01 - core 1
+ * 2'b10 - core 2
+ * 2'b11 - core 3
+ * 29-31 THREAD_ID 3'b000 - thread 0
+ * 3'b001 - thread 1
*/
rlwinm r4,r0,29,25,31
#elif defined(CONFIG_E500MC)
@@ -180,16 +184,9 @@ __secondary_start_page:
#else
mr r4,r0
#endif
- slwi r8,r4,5
+ slwi r8,r4,6 /* spin table is padded to 64 byte */
add r10,r3,r8
-#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING)
- /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
- slwi r8,r4,1
- addi r8,r8,32
- mtspr L1CSR2,r8
-#endif
-
#ifdef CONFIG_E6500
mfspr r0,SPRN_PIR
/*
@@ -209,6 +206,13 @@ __secondary_start_page:
mtspr SPRN_PIR,r4 /* write to PIR register */
+#ifdef CONFIG_SYS_CACHE_STASHING
+ /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
+ slwi r8,r4,1
+ addi r8,r8,32
+ mtspr L1CSR2,r8
+#endif
+
#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
/*
@@ -277,73 +281,111 @@ __secondary_start_page:
beq 2b
#endif
3:
-
-#define EPAPR_MAGIC (0x45504150)
-#define ENTRY_ADDR_UPPER 0
-#define ENTRY_ADDR_LOWER 4
-#define ENTRY_R3_UPPER 8
-#define ENTRY_R3_LOWER 12
-#define ENTRY_RESV 16
-#define ENTRY_PIR 20
-#define ENTRY_R6_UPPER 24
-#define ENTRY_R6_LOWER 28
-#define ENTRY_SIZE 32
-
- /* setup the entry */
- li r3,0
- li r8,1
- stw r4,ENTRY_PIR(r10)
- stw r3,ENTRY_ADDR_UPPER(r10)
- stw r8,ENTRY_ADDR_LOWER(r10)
- stw r3,ENTRY_R3_UPPER(r10)
- stw r4,ENTRY_R3_LOWER(r10)
- stw r3,ENTRY_R6_UPPER(r10)
- stw r3,ENTRY_R6_LOWER(r10)
-
- /* load r13 with the address of the 'bootpg' in SDRAM */
- lis r13,toreset(__bootpg_addr)@h
- ori r13,r13,toreset(__bootpg_addr)@l
+ /* setup mapping for the spin table, WIMGE=0b00100 */
+ lis r13,toreset(__spin_table_addr)@h
+ ori r13,r13,toreset(__spin_table_addr)@l
lwz r13,0(r13)
+ /* mask by 4K */
+ rlwinm r13,r13,0,0,19
- /* setup mapping for AS = 1, and jump there */
lis r11,(MAS0_TLBSEL(1)|MAS0_ESEL(1))@h
mtspr SPRN_MAS0,r11
lis r11,(MAS1_VALID|MAS1_IPROT)@h
ori r11,r11,(MAS1_TS|MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
mtspr SPRN_MAS1,r11
- oris r11,r13,(MAS2_I|MAS2_G)@h
- ori r11,r13,(MAS2_I|MAS2_G)@l
+ oris r11,r13,(MAS2_M|MAS2_G)@h
+ ori r11,r13,(MAS2_M|MAS2_G)@l
mtspr SPRN_MAS2,r11
oris r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@h
ori r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@l
mtspr SPRN_MAS3,r11
+ li r11,0
+ mtspr SPRN_MAS7,r11
tlbwe
- bl 1f
-1: mflr r11
/*
- * OR in 0xfff to create a mask of the bootpg SDRAM address. We use
- * this mask to fixup the cpu spin table and the address that we want
- * to jump to, eg change them from 0xfffffxxx to 0x7ffffxxx if the
- * bootpg is at 0x7ffff000 in SDRAM.
+ * __bootpg_addr has the address of __second_half_boot_page
+ * jump there in AS=1 space with cache enabled
*/
- ori r13,r13,0xfff
- and r11, r11, r13
- and r10, r10, r13
-
- addi r11,r11,(2f-1b)
+ lis r13,toreset(__bootpg_addr)@h
+ ori r13,r13,toreset(__bootpg_addr)@l
+ lwz r11,0(r13)
+ mtspr SPRN_SRR0,r11
mfmsr r13
ori r12,r13,MSR_IS|MSR_DS@l
-
- mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r12
rfi
+ /*
+ * Allocate some space for the SDRAM address of the bootpg.
+ * This variable has to be in the boot page so that it can
+ * be accessed by secondary cores when they come out of reset.
+ */
+ .align L1_CACHE_SHIFT
+ .globl __bootpg_addr
+__bootpg_addr:
+ .long 0
+
+ .global __spin_table_addr
+__spin_table_addr:
+ .long 0
+
+ /*
+ * This variable is set by cpu_init_r() after parsing hwconfig
+ * to enable workaround for erratum NMG_CPU_A011.
+ */
+ .align L1_CACHE_SHIFT
+ .global enable_cpu_a011_workaround
+enable_cpu_a011_workaround:
+ .long 1
+
+ /* Fill in the empty space. The actual reset vector is
+ * the last word of the page */
+__secondary_start_code_end:
+ .space 4092 - (__secondary_start_code_end - __secondary_start_page)
+__secondary_reset_vector:
+ b __secondary_start_page
+
+
+/* this is a separated page for the spin table and cacheable boot code */
+ .align L1_CACHE_SHIFT
+ .global __second_half_boot_page
+__second_half_boot_page:
+#define EPAPR_MAGIC 0x45504150
+#define ENTRY_ADDR_UPPER 0
+#define ENTRY_ADDR_LOWER 4
+#define ENTRY_R3_UPPER 8
+#define ENTRY_R3_LOWER 12
+#define ENTRY_RESV 16
+#define ENTRY_PIR 20
+#define ENTRY_SIZE 64
+ /*
+ * setup the entry
+ * r10 has the base address of the spin table.
+ * spin table is defined as
+ * struct {
+ * uint64_t entry_addr;
+ * uint64_t r3;
+ * uint32_t rsvd1;
+ * uint32_t pir;
+ * };
+ * we pad this struct to 64 bytes so each entry is in its own cacheline
+ */
+ li r3,0
+ li r8,1
+ mfspr r4,SPRN_PIR
+ stw r3,ENTRY_ADDR_UPPER(r10)
+ stw r3,ENTRY_R3_UPPER(r10)
+ stw r4,ENTRY_R3_LOWER(r10)
+ stw r3,ENTRY_RESV(r10)
+ stw r4,ENTRY_PIR(r10)
+ msync
+ stw r8,ENTRY_ADDR_LOWER(r10)
+
/* spin waiting for addr */
-2:
- lwz r4,ENTRY_ADDR_LOWER(r10)
+3: lwz r4,ENTRY_ADDR_LOWER(r10)
andi. r11,r4,1
- bne 2b
+ bne 3b
isync
/* setup IVORs to match fixed offsets */
@@ -362,11 +404,20 @@ __secondary_start_page:
/* mask by ~64M to setup our tlb we will jump to */
rlwinm r12,r4,0,0,5
- /* setup r3, r4, r5, r6, r7, r8, r9 */
+ /*
+ * setup r3, r4, r5, r6, r7, r8, r9
+ * r3 contains the value to put in the r3 register at secondary cpu
+ * entry. The high 32-bits are ignored on 32-bit chip implementations.
+ * 64-bit chip implementations however shall load all 64-bits
+ */
+#ifdef CONFIG_SYS_PPC64
+ ld r3,ENTRY_R3_UPPER(r10)
+#else
lwz r3,ENTRY_R3_LOWER(r10)
+#endif
li r4,0
li r5,0
- lwz r6,ENTRY_R6_LOWER(r10)
+ li r6,0
lis r7,(64*1024*1024)@h
li r8,0
li r9,0
@@ -404,32 +455,10 @@ __secondary_start_page:
mtspr SPRN_SRR1,r13
rfi
- /*
- * Allocate some space for the SDRAM address of the bootpg.
- * This variable has to be in the boot page so that it can
- * be accessed by secondary cores when they come out of reset.
- */
- .globl __bootpg_addr
-__bootpg_addr:
- .long 0
- .align L1_CACHE_SHIFT
+ .align 6
.globl __spin_table
__spin_table:
.space CONFIG_MAX_CPUS*ENTRY_SIZE
-
- /*
- * This variable is set by cpu_init_r() after parsing hwconfig
- * to enable workaround for erratum NMG_CPU_A011.
- */
- .align L1_CACHE_SHIFT
- .global enable_cpu_a011_workaround
-enable_cpu_a011_workaround:
- .long 1
-
- /* Fill in the empty space. The actual reset vector is
- * the last word of the page */
-__secondary_start_code_end:
- .space 4092 - (__secondary_start_code_end - __secondary_start_page)
-__secondary_reset_vector:
- b __secondary_start_page
+__spin_table_end:
+ .space 4096 - (__spin_table_end - __spin_table)
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index abfeb26..801ee07 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -39,6 +39,10 @@ DECLARE_GLOBAL_DATA_PTR;
void get_sys_info (sys_info_t * sysInfo)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#ifdef CONFIG_FSL_IFC
+ struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR;
+ u32 ccr;
+#endif
#ifdef CONFIG_FSL_CORENET
volatile ccsr_clk_t *clk = (void *)(CONFIG_SYS_FSL_CORENET_CLK_ADDR);
unsigned int cpu;
@@ -72,16 +76,22 @@ void get_sys_info (sys_info_t * sysInfo)
[13] = 2, /* CC4 PPL / 2 */
[14] = 4, /* CC4 PPL / 4 */
};
- uint lcrr_div, i, freqCC_PLL[4], rcw_tmp;
- uint ratio[4];
+ uint i, freqCC_PLL[6], rcw_tmp;
+ uint ratio[6];
unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
uint mem_pll_rat;
sysInfo->freqSystemBus = sysclk;
+#ifdef CONFIG_DDR_CLK_FREQ
+ sysInfo->freqDDRBus = CONFIG_DDR_CLK_FREQ;
+#else
sysInfo->freqDDRBus = sysclk;
+#endif
sysInfo->freqSystemBus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
- mem_pll_rat = (in_be32(&gur->rcwsr[0]) >> 17) & 0x1f;
+ mem_pll_rat = (in_be32(&gur->rcwsr[0]) >>
+ FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT)
+ & FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
if (mem_pll_rat > 2)
sysInfo->freqDDRBus *= mem_pll_rat;
else
@@ -91,27 +101,151 @@ void get_sys_info (sys_info_t * sysInfo)
ratio[1] = (in_be32(&clk->pllc2gsr) >> 1) & 0x3f;
ratio[2] = (in_be32(&clk->pllc3gsr) >> 1) & 0x3f;
ratio[3] = (in_be32(&clk->pllc4gsr) >> 1) & 0x3f;
- for (i = 0; i < 4; i++) {
+ ratio[4] = (in_be32(&clk->pllc5gsr) >> 1) & 0x3f;
+ ratio[5] = (in_be32(&clk->pllc6gsr) >> 1) & 0x3f;
+ for (i = 0; i < 6; i++) {
if (ratio[i] > 4)
freqCC_PLL[i] = sysclk * ratio[i];
else
freqCC_PLL[i] = sysInfo->freqSystemBus * ratio[i];
}
- rcw_tmp = in_be32(&gur->rcwsr[3]);
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ /*
+ * Each cluster has up to 4 cores, sharing the same PLL selection.
+ * The cluster assignment is fixed per SoC. There is no way identify the
+ * assignment so far, presuming the "first configuration" which is to
+ * fill the lower cluster group first before moving up to next group.
+ * PLL1, PLL2, PLL3 are cluster group A, feeding core 0~3 on cluster 1
+ * and core 4~7 on cluster 2
+ * PLL4, PLL5, PLL6 are cluster group B, feeding core 8~11 on cluster 3
+ * and core 12~15 on cluster 4 if existing
+ */
for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
- u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf;
+ u32 c_pll_sel = (in_be32(&clk->clkc0csr + (cpu / 4) * 8) >> 27)
+ & 0xf;
u32 cplx_pll = core_cplx_PLL[c_pll_sel];
+ if (cplx_pll > 3)
+ printf("Unsupported architecture configuration"
+ " in function %s\n", __func__);
+ cplx_pll += (cpu / 8) * 3;
sysInfo->freqProcessor[cpu] =
freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
}
+#define PME_CLK_SEL 0xe0000000
+#define PME_CLK_SHIFT 29
+#define FM1_CLK_SEL 0x1c000000
+#define FM1_CLK_SHIFT 26
+ rcw_tmp = in_be32(&gur->rcwsr[7]);
+
+#ifdef CONFIG_SYS_DPAA_PME
+ switch ((rcw_tmp & PME_CLK_SEL) >> PME_CLK_SHIFT) {
+ case 1:
+ sysInfo->freqPME = freqCC_PLL[0];
+ break;
+ case 2:
+ sysInfo->freqPME = freqCC_PLL[0] / 2;
+ break;
+ case 3:
+ sysInfo->freqPME = freqCC_PLL[0] / 3;
+ break;
+ case 4:
+ sysInfo->freqPME = freqCC_PLL[0] / 4;
+ break;
+ case 6:
+ sysInfo->freqPME = freqCC_PLL[1] / 2;
+ break;
+ case 7:
+ sysInfo->freqPME = freqCC_PLL[1] / 3;
+ break;
+ default:
+ printf("Error: Unknown PME clock select!\n");
+ case 0:
+ sysInfo->freqPME = sysInfo->freqSystemBus / 2;
+ break;
+ }
+#endif
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ sysInfo->freqQMAN = sysInfo->freqSystemBus / 2;
+#endif
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+ switch ((rcw_tmp & FM1_CLK_SEL) >> FM1_CLK_SHIFT) {
+ case 1:
+ sysInfo->freqFMan[0] = freqCC_PLL[3];
+ break;
+ case 2:
+ sysInfo->freqFMan[0] = freqCC_PLL[3] / 2;
+ break;
+ case 3:
+ sysInfo->freqFMan[0] = freqCC_PLL[3] / 3;
+ break;
+ case 4:
+ sysInfo->freqFMan[0] = freqCC_PLL[3] / 4;
+ break;
+ case 6:
+ sysInfo->freqFMan[0] = freqCC_PLL[4] / 2;
+ break;
+ case 7:
+ sysInfo->freqFMan[0] = freqCC_PLL[4] / 3;
+ break;
+ default:
+ printf("Error: Unknown FMan1 clock select!\n");
+ case 0:
+ sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2;
+ break;
+ }
+#if (CONFIG_SYS_NUM_FMAN) == 2
+#define FM2_CLK_SEL 0x00000038
+#define FM2_CLK_SHIFT 3
+ rcw_tmp = in_be32(&gur->rcwsr[15]);
+ switch ((rcw_tmp & FM2_CLK_SEL) >> FM2_CLK_SHIFT) {
+ case 1:
+ sysInfo->freqFMan[1] = freqCC_PLL[4];
+ break;
+ case 2:
+ sysInfo->freqFMan[1] = freqCC_PLL[4] / 2;
+ break;
+ case 3:
+ sysInfo->freqFMan[1] = freqCC_PLL[4] / 3;
+ break;
+ case 4:
+ sysInfo->freqFMan[1] = freqCC_PLL[4] / 4;
+ break;
+ case 6:
+ sysInfo->freqFMan[1] = freqCC_PLL[3] / 2;
+ break;
+ case 7:
+ sysInfo->freqFMan[1] = freqCC_PLL[3] / 3;
+ break;
+ default:
+ printf("Error: Unknown FMan2 clock select!\n");
+ case 0:
+ sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2;
+ break;
+ }
+#endif /* CONFIG_SYS_NUM_FMAN == 2 */
+#endif /* CONFIG_SYS_DPAA_FMAN */
+
+#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+
+ for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
+ u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf;
+ u32 cplx_pll = core_cplx_PLL[c_pll_sel];
+
+ sysInfo->freqProcessor[cpu] =
+ freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
+ }
#define PME_CLK_SEL 0x80000000
#define FM1_CLK_SEL 0x40000000
#define FM2_CLK_SEL 0x20000000
#define HWA_ASYNC_DIV 0x04000000
#if (CONFIG_SYS_FSL_NUM_CC_PLLS == 2)
#define HWA_CC_PLL 1
+#elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 3)
+#define HWA_CC_PLL 2
#elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 4)
#define HWA_CC_PLL 2
#else
@@ -151,11 +285,10 @@ void get_sys_info (sys_info_t * sysInfo)
#endif
#endif
-#else
- uint plat_ratio,e500_ratio,half_freqSystemBus;
-#if defined(CONFIG_FSL_LBC)
- uint lcrr_div;
-#endif
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+
+#else /* CONFIG_FSL_CORENET */
+ uint plat_ratio, e500_ratio, half_freqSystemBus;
int i;
#ifdef CONFIG_QE
__maybe_unused u32 qe_ratio;
@@ -202,6 +335,7 @@ void get_sys_info (sys_info_t * sysInfo)
#endif /* CONFIG_FSL_CORENET */
#if defined(CONFIG_FSL_LBC)
+ uint lcrr_div;
#if defined(CONFIG_SYS_LBC_LCRR)
/* We will program LCRR to this value later */
lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
@@ -228,6 +362,13 @@ void get_sys_info (sys_info_t * sysInfo)
sysInfo->freqLocalBus = lcrr_div;
}
#endif
+
+#if defined(CONFIG_FSL_IFC)
+ ccr = in_be32(&ifc_regs->ifc_ccr);
+ ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
+
+ sysInfo->freqLocalBus = sysInfo->freqSystemBus / ccr;
+#endif
}
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 9e04257..ac17f9d 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -169,7 +169,7 @@ l2_disabled:
*
*/
-#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING)
+#ifdef CONFIG_SYS_CACHE_STASHING
/* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
li r2,(32 + 0)
mtspr L1CSR2,r2
@@ -211,6 +211,77 @@ l2_disabled:
andi. r1,r3,L1CSR0_DCE@l
beq 2b
+ .macro create_tlb1_entry esel ts tsize epn wimg rpn perm phy_high scratch
+ lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@l
+ mtspr MAS0, \scratch
+ lis \scratch, FSL_BOOKE_MAS1(1, 1, 0, \ts, \tsize)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS1(1, 1, 0, \ts, \tsize)@l
+ mtspr MAS1, \scratch
+ lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l
+ mtspr MAS2, \scratch
+ lis \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@l
+ mtspr MAS3, \scratch
+ lis \scratch, \phy_high@h
+ ori \scratch, \scratch, \phy_high@l
+ mtspr MAS7, \scratch
+ isync
+ msync
+ tlbwe
+ isync
+ .endm
+
+ .macro create_tlb0_entry esel ts tsize epn wimg rpn perm phy_high scratch
+ lis \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@l
+ mtspr MAS0, \scratch
+ lis \scratch, FSL_BOOKE_MAS1(1, 0, 0, \ts, \tsize)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS1(1, 0, 0, \ts, \tsize)@l
+ mtspr MAS1, \scratch
+ lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l
+ mtspr MAS2, \scratch
+ lis \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@l
+ mtspr MAS3, \scratch
+ lis \scratch, \phy_high@h
+ ori \scratch, \scratch, \phy_high@l
+ mtspr MAS7, \scratch
+ isync
+ msync
+ tlbwe
+ isync
+ .endm
+
+ .macro delete_tlb1_entry esel scratch
+ lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@l
+ mtspr MAS0, \scratch
+ li \scratch, 0
+ mtspr MAS1, \scratch
+ isync
+ msync
+ tlbwe
+ isync
+ .endm
+
+ .macro delete_tlb0_entry esel epn wimg scratch
+ lis \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@l
+ mtspr MAS0, \scratch
+ li \scratch, 0
+ mtspr MAS1, \scratch
+ lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l
+ mtspr MAS2, \scratch
+ isync
+ msync
+ tlbwe
+ isync
+ .endm
+
#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_NAND_SPL)
/*
* TLB entry for debuggging in AS1
@@ -220,61 +291,35 @@ l2_disabled:
* in AS1.
*/
- lis r6,FSL_BOOKE_MAS0(1,
- CONFIG_SYS_PPC_E500_DEBUG_TLB, 0)@h
- ori r6,r6,FSL_BOOKE_MAS0(1,
- CONFIG_SYS_PPC_E500_DEBUG_TLB, 0)@l
-
#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT)
/*
* TLB entry is created for IVPR + IVOR15 to map on valid OP code address
* bacause flash's virtual address maps to 0xff800000 - 0xffffffff.
* and this window is outside of 4K boot window.
*/
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_4M)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_4M)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000,
- (MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000,
- (MAS2_I|MAS2_G))@l
+ create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
+ 0, BOOKE_PAGESZ_4M, \
+ CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \
+ 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
- /* The 85xx has the default boot window 0xff800000 - 0xffffffff */
- lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,(MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,(MAS2_I|MAS2_G))@l
-
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@l
+ create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
+ 0, BOOKE_PAGESZ_1M, \
+ CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
+ CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
#else
/*
* TLB entry is created for IVPR + IVOR15 to map on valid OP code address
* because "nexti" will resize TLB to 4K
*/
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I))@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,
- (MAS2_I))@l
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@l
+ create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
+ 0, BOOKE_PAGESZ_256K, \
+ CONFIG_SYS_MONITOR_BASE, MAS2_I, \
+ CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
#endif
- mtspr MAS0,r6
- mtspr MAS1,r7
- mtspr MAS2,r8
- mtspr MAS3,r9
- tlbwe
- isync
#endif
/*
@@ -392,27 +437,11 @@ l2_disabled:
*/
/* create a temp mapping TLB0[0] for LBCR */
- lis r6,FSL_BOOKE_MAS0(0, 0, 0)@h
- ori r6,r6,FSL_BOOKE_MAS0(0, 0, 0)@l
-
- lis r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@l
-
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@l
-
- mtspr MAS0,r6
- mtspr MAS1,r7
- mtspr MAS2,r8
- mtspr MAS3,r9
- isync
- msync
- tlbwe
+ create_tlb0_entry 0, \
+ 0, BOOKE_PAGESZ_4K, \
+ CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G, \
+ CONFIG_SYS_LBC_ADDR, MAS3_SW|MAS3_SR, \
+ 0, r6
/* Set LBCR register */
lis r4,CONFIG_SYS_LBCR_ADDR@h
@@ -551,49 +580,22 @@ create_ccsr_new_tlb:
ori r8, r8, CONFIG_SYS_CCSRBAR@l
lis r9, (CONFIG_SYS_CCSRBAR + 0x1000)@h
ori r9, r9, (CONFIG_SYS_CCSRBAR + 0x1000)@l
- lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h
- ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l
- lis r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h
- ori r1, r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l
- lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h
- ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l
- lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@h
- ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@l
-#ifdef CONFIG_ENABLE_36BIT_PHYS
- lis r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h
- ori r7, r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l
- mtspr MAS7, r7
-#endif
- mtspr MAS0, r0
- mtspr MAS1, r1
- mtspr MAS2, r2
- mtspr MAS3, r3
- isync
- msync
- tlbwe
-
+ create_tlb0_entry 0, \
+ 0, BOOKE_PAGESZ_4K, \
+ CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, \
+ CONFIG_SYS_CCSRBAR_PHYS_LOW, MAS3_SW|MAS3_SR, \
+ CONFIG_SYS_CCSRBAR_PHYS_HIGH, r3
/*
* Create a TLB for the current location of CCSR. Register R9 is reserved
* for the virtual address of this TLB (CONFIG_SYS_CCSRBAR + 0x1000).
*/
create_ccsr_old_tlb:
- lis r0, FSL_BOOKE_MAS0(0, 1, 0)@h
- ori r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l
- lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h
- ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l
- lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@h
- ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@l
-#ifdef CONFIG_ENABLE_36BIT_PHYS
- li r7, 0 /* The default CCSR address is always a 32-bit number */
- mtspr MAS7, r7
-#endif
- mtspr MAS0, r0
- /* MAS1 is the same as above */
- mtspr MAS2, r2
- mtspr MAS3, r3
- isync
- msync
- tlbwe
+ create_tlb0_entry 1, \
+ 0, BOOKE_PAGESZ_4K, \
+ CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, \
+ CONFIG_SYS_CCSRBAR_DEFAULT, MAS3_SW|MAS3_SR, \
+ 0, r3 /* The default CCSR address is always a 32-bit number */
+
/*
* We have a TLB for what we think is the current (old) CCSR. Let's
@@ -743,29 +745,46 @@ write_new_ccsrbar:
/* Delete the temporary TLBs */
delete_temp_tlbs:
- lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h
- ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l
- li r1, 0
- lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h
- ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l
- mtspr MAS0, r0
- mtspr MAS1, r1
- mtspr MAS2, r2
- isync
- msync
- tlbwe
+ delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, r3
+ delete_tlb0_entry 1, CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, r3
- lis r0, FSL_BOOKE_MAS0(0, 1, 0)@h
- ori r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l
- lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h
- ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l
- mtspr MAS0, r0
- mtspr MAS2, r2
- isync
- msync
- tlbwe
#endif /* #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) */
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+create_ccsr_l2_tlb:
+ /*
+ * Create a TLB for the MMR location of CCSR
+ * to access L2CSR0 register
+ */
+ create_tlb0_entry 0, \
+ 0, BOOKE_PAGESZ_4K, \
+ CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, \
+ CONFIG_SYS_CCSRBAR_PHYS_LOW + 0xC20000, MAS3_SW|MAS3_SR, \
+ CONFIG_SYS_CCSRBAR_PHYS_HIGH, r3
+
+enable_l2_cluster_l2:
+ /* enable L2 cache */
+ lis r3, (CONFIG_SYS_CCSRBAR + 0xC20000)@h
+ ori r3, r3, (CONFIG_SYS_CCSRBAR + 0xC20000)@l
+ li r4, 33 /* stash id */
+ stw r4, 4(r3)
+ lis r4, (L2CSR0_L2FI|L2CSR0_L2LFC)@h
+ ori r4, r4, (L2CSR0_L2FI|L2CSR0_L2LFC)@l
+ sync
+ stw r4, 0(r3) /* invalidate L2 */
+1: sync
+ lwz r0, 0(r3)
+ twi 0, r0, 0
+ isync
+ and. r1, r0, r4
+ bne 1b
+ lis r4, L2CSR0_L2E@h
+ sync
+ stw r4, 0(r3) /* eanble L2 */
+delete_ccsr_l2_tlb:
+ delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, r3
+#endif
+
#ifdef CONFIG_SYS_FSL_ERRATUM_A004510
#define DCSR_LAWBARH0 (CONFIG_SYS_CCSRBAR + 0x1000)
#define LAW_SIZE_1M 0x13
@@ -1019,83 +1038,50 @@ create_init_ram_area:
#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT)
/* create a temp mapping in AS=1 to the 4M boot window */
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l
+ create_tlb1_entry 15, \
+ 1, BOOKE_PAGESZ_4M, \
+ CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \
+ 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, (MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, (MAS2_I|MAS2_G))@l
-
- /* The 85xx has the default boot window 0xff800000 - 0xffffffff */
- lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
/* create a temp mapping in AS = 1 for Flash mapping
* created by PBL for ISBC code
*/
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@l
-
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@l
+ create_tlb1_entry 15, \
+ 1, BOOKE_PAGESZ_1M, \
+ CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
+ CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
#else
/*
* create a temp mapping in AS=1 to the 1M CONFIG_SYS_MONITOR_BASE space, the main
* image has been relocated to CONFIG_SYS_MONITOR_BASE on the second stage.
*/
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@l
-
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+ create_tlb1_entry 15, \
+ 1, BOOKE_PAGESZ_1M, \
+ CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
+ CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
#endif
- mtspr MAS0,r6
- mtspr MAS1,r7
- mtspr MAS2,r8
- mtspr MAS3,r9
- isync
- msync
- tlbwe
-
/* create a temp mapping in AS=1 to the stack */
- lis r6,FSL_BOOKE_MAS0(1, 14, 0)@h
- ori r6,r6,FSL_BOOKE_MAS0(1, 14, 0)@l
-
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@l
-
#if defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) && \
defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH)
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@l
- li r10,CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH
- mtspr MAS7,r10
+ create_tlb1_entry 14, \
+ 1, BOOKE_PAGESZ_16K, \
+ CONFIG_SYS_INIT_RAM_ADDR, 0, \
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, MAS3_SX|MAS3_SW|MAS3_SR, \
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH, r6
+
#else
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+ create_tlb1_entry 14, \
+ 1, BOOKE_PAGESZ_16K, \
+ CONFIG_SYS_INIT_RAM_ADDR, 0, \
+ CONFIG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
#endif
- mtspr MAS0,r6
- mtspr MAS1,r7
- mtspr MAS2,r8
- mtspr MAS3,r9
- isync
- msync
- tlbwe
-
lis r6,MSR_IS|MSR_DS|MSR_DE@h
ori r6,r6,MSR_IS|MSR_DS|MSR_DE@l
lis r7,switch_as@h
diff --git a/arch/powerpc/cpu/mpc85xx/t4240_ids.c b/arch/powerpc/cpu/mpc85xx/t4240_ids.c
new file mode 100644
index 0000000..a8f16b1
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/t4240_ids.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+ /* dqrr liodn, frame data liodn, liodn off, sdest */
+ SET_QP_INFO(1, 27, 1, 0),
+ SET_QP_INFO(2, 28, 1, 0),
+ SET_QP_INFO(3, 29, 1, 1),
+ SET_QP_INFO(4, 30, 1, 1),
+ SET_QP_INFO(5, 31, 1, 2),
+ SET_QP_INFO(6, 32, 1, 2),
+ SET_QP_INFO(7, 33, 1, 3),
+ SET_QP_INFO(8, 34, 1, 3),
+ SET_QP_INFO(9, 35, 1, 4),
+ SET_QP_INFO(10, 36, 1, 4),
+ SET_QP_INFO(11, 37, 1, 5),
+ SET_QP_INFO(12, 38, 1, 5),
+ SET_QP_INFO(13, 39, 1, 6),
+ SET_QP_INFO(14, 40, 1, 6),
+ SET_QP_INFO(15, 41, 1, 7),
+ SET_QP_INFO(16, 42, 1, 7),
+ SET_QP_INFO(17, 43, 1, 8),
+ SET_QP_INFO(18, 44, 1, 8),
+ SET_QP_INFO(19, 45, 1, 9),
+ SET_QP_INFO(20, 46, 1, 9),
+ SET_QP_INFO(21, 47, 1, 10),
+ SET_QP_INFO(22, 48, 1, 10),
+ SET_QP_INFO(23, 49, 1, 11),
+ SET_QP_INFO(24, 50, 1, 11),
+ SET_QP_INFO(65, 89, 1, 0),
+ SET_QP_INFO(66, 90, 1, 0),
+ SET_QP_INFO(67, 91, 1, 1),
+ SET_QP_INFO(68, 92, 1, 1),
+ SET_QP_INFO(69, 93, 1, 2),
+ SET_QP_INFO(70, 94, 1, 2),
+ SET_QP_INFO(71, 95, 1, 3),
+ SET_QP_INFO(72, 96, 1, 3),
+ SET_QP_INFO(73, 97, 1, 4),
+ SET_QP_INFO(74, 98, 1, 4),
+ SET_QP_INFO(75, 99, 1, 5),
+ SET_QP_INFO(76, 100, 1, 5),
+ SET_QP_INFO(77, 101, 1, 6),
+ SET_QP_INFO(78, 102, 1, 6),
+ SET_QP_INFO(79, 103, 1, 7),
+ SET_QP_INFO(80, 104, 1, 7),
+ SET_QP_INFO(81, 105, 1, 8),
+ SET_QP_INFO(82, 106, 1, 8),
+ SET_QP_INFO(83, 107, 1, 9),
+ SET_QP_INFO(84, 108, 1, 9),
+ SET_QP_INFO(85, 109, 1, 10),
+ SET_QP_INFO(86, 110, 1, 10),
+ SET_QP_INFO(87, 111, 1, 11),
+ SET_QP_INFO(88, 112, 1, 11),
+ SET_QP_INFO(25, 51, 1, 0),
+ SET_QP_INFO(26, 52, 1, 0),
+};
+#endif
+
+struct srio_liodn_id_table srio_liodn_tbl[] = {
+ SET_SRIO_LIODN_1(1, 307),
+ SET_SRIO_LIODN_1(2, 387),
+};
+int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
+
+struct liodn_id_table liodn_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ SET_QMAN_LIODN(62),
+ SET_BMAN_LIODN(63),
+#endif
+
+ SET_SDHC_LIODN(1, 552),
+
+ SET_PME_LIODN(117),
+
+ SET_USB_LIODN(1, "fsl-usb2-mph", 553),
+ SET_USB_LIODN(2, "fsl-usb2-dr", 554),
+
+ SET_SATA_LIODN(1, 555),
+ SET_SATA_LIODN(2, 556),
+
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 228),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 308),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 388),
+
+ SET_DMA_LIODN(1, 147),
+ SET_DMA_LIODN(2, 227),
+
+ SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
+ SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
+ SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0),
+ SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0),
+
+#ifdef CONFIG_SYS_PMAN
+ SET_PMAN_LIODN(1, 513),
+ SET_PMAN_LIODN(2, 514),
+ SET_PMAN_LIODN(3, 515),
+#endif
+
+ /* SET_NEXUS_LIODN(557), -- not yet implemented */
+};
+int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct liodn_id_table fman1_liodn_tbl[] = {
+ SET_FMAN_RX_1G_LIODN(1, 0, 88),
+ SET_FMAN_RX_1G_LIODN(1, 1, 89),
+ SET_FMAN_RX_1G_LIODN(1, 2, 90),
+ SET_FMAN_RX_1G_LIODN(1, 3, 91),
+ SET_FMAN_RX_1G_LIODN(1, 4, 92),
+ SET_FMAN_RX_1G_LIODN(1, 5, 93),
+ SET_FMAN_RX_10G_LIODN(1, 0, 94),
+ SET_FMAN_RX_10G_LIODN(1, 1, 95),
+};
+int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
+#if (CONFIG_SYS_NUM_FMAN == 2)
+struct liodn_id_table fman2_liodn_tbl[] = {
+ SET_FMAN_RX_1G_LIODN(2, 0, 88),
+ SET_FMAN_RX_1G_LIODN(2, 1, 89),
+ SET_FMAN_RX_1G_LIODN(2, 2, 90),
+ SET_FMAN_RX_1G_LIODN(2, 3, 91),
+ SET_FMAN_RX_1G_LIODN(2, 4, 92),
+ SET_FMAN_RX_1G_LIODN(2, 5, 93),
+ SET_FMAN_RX_10G_LIODN(2, 0, 94),
+ SET_FMAN_RX_10G_LIODN(2, 1, 95),
+};
+int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl);
+#endif
+#endif
+
+struct liodn_id_table sec_liodn_tbl[] = {
+ SET_SEC_JR_LIODN_ENTRY(0, 454, 458),
+ SET_SEC_JR_LIODN_ENTRY(1, 455, 459),
+ SET_SEC_JR_LIODN_ENTRY(2, 456, 460),
+ SET_SEC_JR_LIODN_ENTRY(3, 457, 461),
+ SET_SEC_RTIC_LIODN_ENTRY(a, 453),
+ SET_SEC_RTIC_LIODN_ENTRY(b, 549),
+ SET_SEC_RTIC_LIODN_ENTRY(c, 550),
+ SET_SEC_RTIC_LIODN_ENTRY(d, 551),
+ SET_SEC_DECO_LIODN_ENTRY(0, 541, 610),
+ SET_SEC_DECO_LIODN_ENTRY(1, 542, 611),
+ SET_SEC_DECO_LIODN_ENTRY(2, 543, 612),
+ SET_SEC_DECO_LIODN_ENTRY(3, 544, 613),
+ SET_SEC_DECO_LIODN_ENTRY(4, 545, 614),
+ SET_SEC_DECO_LIODN_ENTRY(5, 546, 615),
+ SET_SEC_DECO_LIODN_ENTRY(6, 547, 616),
+ SET_SEC_DECO_LIODN_ENTRY(7, 548, 617),
+};
+int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_RMAN
+struct liodn_id_table rman_liodn_tbl[] = {
+ /* Set RMan block 0-3 liodn offset */
+ SET_RMAN_LIODN(0, 678),
+ SET_RMAN_LIODN(1, 679),
+ SET_RMAN_LIODN(2, 680),
+ SET_RMAN_LIODN(3, 681),
+};
+int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
+#endif
+
+struct liodn_id_table liodn_bases[] = {
+#ifdef CONFIG_SYS_DPAA_DCE
+ [FSL_HW_PORTAL_DCE] = SET_LIODN_BASE_2(618, 694),
+#endif
+ [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558),
+#ifdef CONFIG_SYS_DPAA_FMAN
+ [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973),
+#if (CONFIG_SYS_NUM_FMAN == 2)
+ [FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(1069),
+#endif
+#endif
+#ifdef CONFIG_SYS_DPAA_PME
+ [FSL_HW_PORTAL_PME] = SET_LIODN_BASE_2(770, 846),
+#endif
+#ifdef CONFIG_SYS_DPAA_RMAN
+ [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922),
+#endif
+};
diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
new file mode 100644
index 0000000..102defa
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
@@ -0,0 +1,237 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include "fsl_corenet2_serdes.h"
+
+struct serdes_config {
+ u32 protocol;
+ u8 lanes[SRDS_MAX_LANES];
+};
+
+static struct serdes_config serdes1_cfg_tbl[] = {
+ /* SerDes 1 */
+ {1, {XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+ XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10}},
+ {2, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC10, HIGIG_FM1_MAC10,
+ HIGIG_FM1_MAC10, HIGIG_FM1_MAC10}},
+ {4, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC10, HIGIG_FM1_MAC10,
+ HIGIG_FM1_MAC10, HIGIG_FM1_MAC10}},
+ {28, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4}},
+ {36, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4}},
+ {38, {NONE, NONE, QSGMII_FM1_B, NONE,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {40, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {46, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {48, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {}
+};
+static struct serdes_config serdes2_cfg_tbl[] = {
+ /* SerDes 2 */
+ {1, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC10, XAUI_FM2_MAC10,
+ XAUI_FM2_MAC10, XAUI_FM2_MAC10}},
+ {2, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC10, HIGIG_FM2_MAC10,
+ HIGIG_FM2_MAC10, HIGIG_FM2_MAC10}},
+ {4, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC10, HIGIG_FM2_MAC10,
+ HIGIG_FM2_MAC10, HIGIG_FM2_MAC10}},
+ {7, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {13, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {14, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {16, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {22, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {23, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {25, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {26, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {28, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {36, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {38, {NONE, NONE, QSGMII_FM2_B, NONE,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {40, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {46, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {48, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {50, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {52, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {54, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {56, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+ XFI_FM2_MAC10, XFI_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {57, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+ XFI_FM2_MAC10, XFI_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {}
+};
+static struct serdes_config serdes3_cfg_tbl[] = {
+ /* SerDes 3 */
+ {2, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1}},
+ {4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2}},
+ {6, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1}},
+ {8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE}},
+ {9, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN}},
+ {10, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN}},
+ {12, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ PCIE2, PCIE2, PCIE2, PCIE2}},
+ {14, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ PCIE2, PCIE2, PCIE2, PCIE2}},
+ {16, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {17, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {19, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {20, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {}
+};
+static struct serdes_config serdes4_cfg_tbl[] = {
+ /* SerDes 4 */
+ {2, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3}},
+ {4, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4}},
+ {6, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}},
+ {8, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}},
+ {10, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA1}},
+ {12, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SATA1, SATA1}},
+ {14, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}},
+ {16, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}},
+ {18, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, AURORA, AURORA}},
+ {}
+};
+static struct serdes_config *serdes_cfg_tbl[] = {
+ serdes1_cfg_tbl,
+ serdes2_cfg_tbl,
+ serdes3_cfg_tbl,
+ serdes4_cfg_tbl,
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+ struct serdes_config *ptr;
+
+ if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ ptr = serdes_cfg_tbl[serdes];
+ while (ptr->protocol) {
+ if (ptr->protocol == cfg)
+ return ptr->lanes[lane];
+ ptr++;
+ }
+ return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+ int i;
+ struct serdes_config *ptr;
+
+ if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ ptr = serdes_cfg_tbl[serdes];
+ while (ptr->protocol) {
+ if (ptr->protocol == prtcl)
+ break;
+ ptr++;
+ }
+
+ if (!ptr->protocol)
+ return 0;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (ptr->lanes[i] != NONE)
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c
index 929f6a6..a548dec 100644
--- a/arch/powerpc/cpu/mpc85xx/tlb.c
+++ b/arch/powerpc/cpu/mpc85xx/tlb.c
@@ -249,7 +249,7 @@ setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg)
{
int i;
unsigned int tlb_size;
- unsigned int wimge = 0;
+ unsigned int wimge = MAS2_M;
unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE;
unsigned int max_cam;
u64 size, memsize = (u64)memsize_in_meg << 20;
diff --git a/arch/powerpc/cpu/mpc86xx/fdt.c b/arch/powerpc/cpu/mpc86xx/fdt.c
index 61f5110..2f955fe 100644
--- a/arch/powerpc/cpu/mpc86xx/fdt.c
+++ b/arch/powerpc/cpu/mpc86xx/fdt.c
@@ -20,7 +20,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_MP
int off;
- u32 bootpg = determine_mp_bootpg();
+ u32 bootpg = determine_mp_bootpg(NULL);
#endif
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
diff --git a/arch/powerpc/cpu/mpc86xx/mp.c b/arch/powerpc/cpu/mpc86xx/mp.c
index 30c99eb..de705f0 100644
--- a/arch/powerpc/cpu/mpc86xx/mp.c
+++ b/arch/powerpc/cpu/mpc86xx/mp.c
@@ -90,8 +90,11 @@ int cpu_release(int nr, int argc, char * const argv[])
return 1;
}
-u32 determine_mp_bootpg(void)
+u32 determine_mp_bootpg(unsigned int *pagesize)
{
+ if (pagesize)
+ *pagesize = 4096;
+
/* if we have 4G or more of memory, put the boot page at 4Gb-1M */
if ((u64)gd->ram_size > 0xfffff000)
return (0xfff00000);
@@ -101,7 +104,7 @@ u32 determine_mp_bootpg(void)
void cpu_mp_lmb_reserve(struct lmb *lmb)
{
- u32 bootpg = determine_mp_bootpg();
+ u32 bootpg = determine_mp_bootpg(NULL);
/* tell u-boot we stole a page */
lmb_reserve(lmb, bootpg, 4096);
@@ -115,7 +118,7 @@ void setup_mp(void)
{
extern ulong __secondary_start_page;
ulong fixup = (ulong)&__secondary_start_page;
- u32 bootpg = determine_mp_bootpg();
+ u32 bootpg = determine_mp_bootpg(NULL);
u32 bootpg_va;
if (bootpg >= CONFIG_SYS_MAX_DDR_BAT_SIZE) {
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index 78a8f92..2c487ca 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -73,6 +73,17 @@ struct cpu_type cpu_type_list [] = {
CPU_TYPE_ENTRY(P4080, P4080, 8),
CPU_TYPE_ENTRY(P5010, P5010, 1),
CPU_TYPE_ENTRY(P5020, P5020, 2),
+ CPU_TYPE_ENTRY(P5021, P5021, 2),
+ CPU_TYPE_ENTRY(P5040, P5040, 4),
+ CPU_TYPE_ENTRY(T4240, T4240, 0),
+ CPU_TYPE_ENTRY(T4120, T4120, 0),
+ CPU_TYPE_ENTRY(B4860, B4860, 0),
+ CPU_TYPE_ENTRY(G4860, G4860, 0),
+ CPU_TYPE_ENTRY(G4060, G4060, 0),
+ CPU_TYPE_ENTRY(B4440, B4440, 0),
+ CPU_TYPE_ENTRY(G4440, G4440, 0),
+ CPU_TYPE_ENTRY(B4420, B4420, 0),
+ CPU_TYPE_ENTRY(B4220, B4220, 0),
CPU_TYPE_ENTRY(BSC9130, 9130, 1),
CPU_TYPE_ENTRY(BSC9131, 9131, 1),
#elif defined(CONFIG_MPC86xx)
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
index 2592873..5928eb8 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
@@ -229,6 +229,26 @@ static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr)
/* -3E = 667 CL5, -25 = CL6 800, -25E = CL5 800 */
#if !defined(CONFIG_FSL_DDR1)
+static inline int avoid_odt_overlap(const dimm_params_t *dimm_params)
+{
+#if CONFIG_DIMM_SLOTS_PER_CTLR == 1
+ if (dimm_params[0].n_ranks == 4)
+ return 1;
+#endif
+
+#if CONFIG_DIMM_SLOTS_PER_CTLR == 2
+ if ((dimm_params[0].n_ranks == 2) &&
+ (dimm_params[1].n_ranks == 2))
+ return 1;
+
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+ if (dimm_params[0].n_ranks == 4)
+ return 1;
+#endif
+#endif
+ return 0;
+}
+
/*
* DDR SDRAM Timing Configuration 0 (TIMING_CFG_0)
*
@@ -236,7 +256,8 @@ static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr)
* dreams up non-zero default values to be backwards compatible.
*/
static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts)
+ const memctl_options_t *popts,
+ const dimm_params_t *dimm_params)
{
unsigned char trwt_mclk = 0; /* Read-to-write turnaround */
unsigned char twrt_mclk = 0; /* Write-to-read turnaround */
@@ -266,7 +287,18 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr,
unsigned int data_rate = get_ddr_freq(0);
tmrd_mclk = 4;
/* set the turnaround time */
- trwt_mclk = 1;
+
+ /*
+ * for single quad-rank DIMM and two dual-rank DIMMs
+ * to avoid ODT overlap
+ */
+ if (avoid_odt_overlap(dimm_params)) {
+ twwt_mclk = 2;
+ trrt_mclk = 1;
+ }
+ /* for faster clock, need more time for data setup */
+ trwt_mclk = (data_rate/1000000 > 1800) ? 2 : 1;
+
if ((data_rate/1000000 > 1150) || (popts->memctl_interleaving))
twrt_mclk = 1;
@@ -451,8 +483,8 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr,
| ((caslat_ctrl & 0xF) << 16)
| ((refrec_ctrl & 0xF) << 12)
| ((wrrec_mclk & 0x0F) << 8)
- | ((acttoact_mclk & 0x07) << 4)
- | ((wrtord_mclk & 0x07) << 0)
+ | ((acttoact_mclk & 0x0F) << 4)
+ | ((wrtord_mclk & 0x0F) << 0)
);
debug("FSLDDR: timing_cfg_1 = 0x%08x\n", ddr->timing_cfg_1);
}
@@ -659,6 +691,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
unsigned int dqs_cfg; /* DQS configuration */
unsigned int odt_cfg = 0; /* ODT configuration */
unsigned int num_pr; /* Number of posted refreshes */
+ unsigned int slow = 0; /* DDR will be run less than 1250 */
unsigned int obc_cfg; /* On-The-Fly Burst Chop Cfg */
unsigned int ap_en; /* Address Parity Enable */
unsigned int d_init; /* DRAM data initialization */
@@ -692,6 +725,10 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
obc_cfg = 0;
#endif
+#if (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7)
+ slow = get_ddr_freq(0) < 1249000000;
+#endif
+
if (popts->registered_dimm_en) {
rcw_en = 1;
ap_en = popts->ap_en;
@@ -720,6 +757,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
| ((dqs_cfg & 0x3) << 26)
| ((odt_cfg & 0x3) << 21)
| ((num_pr & 0xf) << 12)
+ | ((slow & 1) << 11)
| (qd_en << 9)
| (unq_mrs_en << 8)
| ((obc_cfg & 0x1) << 6)
@@ -1347,6 +1385,11 @@ static void set_ddr_wrlvl_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int wrlvl_en,
| ((wrlvl_start & 0x1F) << 0)
);
debug("FSLDDR: wrlvl_cntl = 0x%08x\n", ddr->ddr_wrlvl_cntl);
+ ddr->ddr_wrlvl_cntl_2 = popts->wrlvl_ctl_2;
+ debug("FSLDDR: wrlvl_cntl_2 = 0x%08x\n", ddr->ddr_wrlvl_cntl_2);
+ ddr->ddr_wrlvl_cntl_3 = popts->wrlvl_ctl_3;
+ debug("FSLDDR: wrlvl_cntl_3 = 0x%08x\n", ddr->ddr_wrlvl_cntl_3);
+
}
/* DDR Self Refresh Counter (DDR_SR_CNTR) */
@@ -1370,6 +1413,12 @@ static void set_ddr_cdr1(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts)
debug("FSLDDR: ddr_cdr1 = 0x%08x\n", ddr->ddr_cdr1);
}
+static void set_ddr_cdr2(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts)
+{
+ ddr->ddr_cdr2 = popts->ddr_cdr2;
+ debug("FSLDDR: ddr_cdr2 = 0x%08x\n", ddr->ddr_cdr2);
+}
+
unsigned int
check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr)
{
@@ -1466,7 +1515,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
break;
}
sa = common_dimm->base_address;
- ea = common_dimm->total_mem - 1;
+ ea = sa + common_dimm->total_mem - 1;
} else if (!popts->memctl_interleaving) {
/*
* If memory interleaving between controllers is NOT
@@ -1480,7 +1529,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
case FSL_DDR_CS0_CS1_CS2_CS3:
sa = common_dimm->base_address;
- ea = common_dimm->total_mem - 1;
+ ea = sa + common_dimm->total_mem - 1;
break;
case FSL_DDR_CS0_CS1_AND_CS2_CS3:
if ((i >= 2) && (dimm_number == 0)) {
@@ -1537,17 +1586,19 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
sa >>= 24;
ea >>= 24;
- ddr->cs[i].bnds = (0
- | ((sa & 0xFFF) << 16) /* starting address MSB */
- | ((ea & 0xFFF) << 0) /* ending address MSB */
- );
+ if (cs_en) {
+ ddr->cs[i].bnds = (0
+ | ((sa & 0xFFF) << 16)/* starting address MSB */
+ | ((ea & 0xFFF) << 0) /* ending address MSB */
+ );
+ } else {
+ debug("FSLDDR: setting bnds to 0 for inactive CS\n");
+ ddr->cs[i].bnds = 0;
+ }
debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds);
- if (cs_en) {
- set_csn_config(dimm_number, i, ddr, popts, dimm_params);
- set_csn_config_2(i, ddr);
- } else
- debug("CS%d is disabled.\n", i);
+ set_csn_config(dimm_number, i, ddr, popts, dimm_params);
+ set_csn_config_2(i, ddr);
}
/*
@@ -1560,7 +1611,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
set_ddr_eor(ddr, popts);
#if !defined(CONFIG_FSL_DDR1)
- set_timing_cfg_0(ddr, popts);
+ set_timing_cfg_0(ddr, popts, dimm_params);
#endif
set_timing_cfg_3(ddr, popts, common_dimm, cas_latency);
@@ -1569,6 +1620,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
cas_latency, additive_latency);
set_ddr_cdr1(ddr, popts);
+ set_ddr_cdr2(ddr, popts);
set_ddr_sdram_cfg(ddr, popts, common_dimm);
ip_rev = fsl_ddr_get_version();
if (ip_rev > 0x40400)
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
index f59d105..cb71f94 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
@@ -452,6 +452,8 @@ static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo,
CTRL_OPTIONS(rcw_override),
CTRL_OPTIONS(rcw_1),
CTRL_OPTIONS(rcw_2),
+ CTRL_OPTIONS(ddr_cdr1),
+ CTRL_OPTIONS(ddr_cdr2),
CTRL_OPTIONS(tCKE_clock_pulse_width_ps),
CTRL_OPTIONS(tFAW_window_four_activates_ps),
CTRL_OPTIONS(trwt_override),
@@ -518,6 +520,8 @@ static void print_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr)
CFG_REGS(timing_cfg_5),
CFG_REGS(ddr_zq_cntl),
CFG_REGS(ddr_wrlvl_cntl),
+ CFG_REGS(ddr_wrlvl_cntl_2),
+ CFG_REGS(ddr_wrlvl_cntl_3),
CFG_REGS(ddr_sr_cntr),
CFG_REGS(ddr_sdram_rcw_1),
CFG_REGS(ddr_sdram_rcw_2),
@@ -525,6 +529,7 @@ static void print_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr)
CFG_REGS(ddr_cdr2),
CFG_REGS(err_disable),
CFG_REGS(err_int_en),
+ CFG_REGS(ddr_eor),
};
static const unsigned int n_opts = ARRAY_SIZE(options);
@@ -584,6 +589,8 @@ static void fsl_ddr_regs_edit(fsl_ddr_info_t *pinfo,
CFG_REGS(timing_cfg_5),
CFG_REGS(ddr_zq_cntl),
CFG_REGS(ddr_wrlvl_cntl),
+ CFG_REGS(ddr_wrlvl_cntl_2),
+ CFG_REGS(ddr_wrlvl_cntl_3),
CFG_REGS(ddr_sr_cntr),
CFG_REGS(ddr_sdram_rcw_1),
CFG_REGS(ddr_sdram_rcw_2),
@@ -593,7 +600,7 @@ static void fsl_ddr_regs_edit(fsl_ddr_info_t *pinfo,
CFG_REGS(err_int_en),
CFG_REGS(ddr_sdram_rcw_2),
CFG_REGS(ddr_sdram_rcw_2),
-
+ CFG_REGS(ddr_eor),
};
static const unsigned int n_opts = ARRAY_SIZE(options);
@@ -689,6 +696,8 @@ static void print_memctl_options(const memctl_options_t *popts)
CTRL_OPTIONS(rcw_override),
CTRL_OPTIONS(rcw_1),
CTRL_OPTIONS(rcw_2),
+ CTRL_OPTIONS_HEX(ddr_cdr1),
+ CTRL_OPTIONS_HEX(ddr_cdr2),
CTRL_OPTIONS(tCKE_clock_pulse_width_ps),
CTRL_OPTIONS(tFAW_window_four_activates_ps),
CTRL_OPTIONS(trwt_override),
@@ -1597,6 +1606,7 @@ unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo)
* doesn't return
*/
do_reset(NULL, 0, 0, NULL);
+ printf("Reset didn't work\n");
}
if (strcmp(argv[0], "recompute") == 0) {
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
index 03a784c..6a1f4e4 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
@@ -76,7 +76,7 @@ compute_cas_latency_ddr3(const dimm_params_t *dimm_params,
unsigned int
compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
common_timing_params_t *outpdimm,
- unsigned int number_of_dimms)
+ const unsigned int number_of_dimms)
{
unsigned int i, j;
@@ -126,13 +126,20 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
temp1++;
continue;
}
+
+ /*
+ * check if quad-rank DIMM is plugged if
+ * CONFIG_CHIP_SELECT_QUAD_CAPABLE is not defined
+ * Only the board with proper design is capable
+ */
+#ifndef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
if (dimm_params[i].n_ranks == 4 && \
CONFIG_CHIP_SELECTS_PER_CTRL/CONFIG_DIMM_SLOTS_PER_CTLR < 4) {
printf("Found Quad-rank DIMM, not able to support.");
temp1++;
continue;
}
-
+#endif
/*
* Find minimum tCKmax_ps to find fastest slow speed,
* i.e., this is the slowest the whole system can go.
@@ -236,11 +243,14 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
if (outpdimm->all_DIMMs_registered)
for (j = 0; j < 16; j++) {
outpdimm->rcw[j] = dimm_params[0].rcw[j];
- for (i = 1; i < number_of_dimms; i++)
+ for (i = 1; i < number_of_dimms; i++) {
+ if (!dimm_params[i].n_ranks)
+ continue;
if (dimm_params[i].rcw[j] != dimm_params[0].rcw[j]) {
temp1 = 1;
break;
}
+ }
}
if (temp1 != 0)
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
index b47268c..d6b73c7 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
@@ -77,7 +77,19 @@ static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address)
sizeof(generic_spd_eeprom_t));
if (ret) {
- printf("DDR: failed to read SPD from address %u\n", i2c_address);
+ if (i2c_address ==
+#ifdef SPD_EEPROM_ADDRESS
+ SPD_EEPROM_ADDRESS
+#elif defined(SPD_EEPROM_ADDRESS1)
+ SPD_EEPROM_ADDRESS1
+#endif
+ ) {
+ printf("DDR: failed to read SPD from address %u\n",
+ i2c_address);
+ } else {
+ debug("DDR: failed to read SPD from address %u\n",
+ i2c_address);
+ }
memset(spd, 0, sizeof(generic_spd_eeprom_t));
}
}
@@ -526,6 +538,17 @@ phys_size_t fsl_ddr_sdram(void)
#endif
total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 0);
+ /* setup 3-way interleaving before enabling DDRC */
+ switch (info.memctl_opts[0].memctl_interleaving_mode) {
+ case FSL_DDR_3WAY_1KB_INTERLEAVING:
+ case FSL_DDR_3WAY_4KB_INTERLEAVING:
+ case FSL_DDR_3WAY_8KB_INTERLEAVING:
+ fsl_ddr_set_intl3r(info.memctl_opts[0].memctl_interleaving_mode);
+ break;
+ default:
+ break;
+ }
+
/* Program configuration registers. */
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
debug("Programming controller %u\n", i);
@@ -561,7 +584,6 @@ phys_size_t fsl_ddr_sdram(void)
case FSL_DDR_3WAY_8KB_INTERLEAVING:
law_memctl = LAW_TRGT_IF_DDR_INTLV_123;
if (i == 0) {
- fsl_ddr_set_intl3r(info.memctl_opts[i].memctl_interleaving_mode);
fsl_ddr_set_lawbar(&info.common_timing_params[i],
law_memctl, i);
}
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c
index 13e4825..2f13b8f 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c
@@ -474,6 +474,34 @@ static const struct dynamic_odt odt_unknown[4] = {
}
};
#endif
+
+/*
+ * Automatically seleect bank interleaving mode based on DIMMs
+ * in this order: cs0_cs1_cs2_cs3, cs0_cs1, null.
+ * This function only deal with one or two slots per controller.
+ */
+static inline unsigned int auto_bank_intlv(dimm_params_t *pdimm)
+{
+#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
+ if (pdimm[0].n_ranks == 4)
+ return FSL_DDR_CS0_CS1_CS2_CS3;
+ else if (pdimm[0].n_ranks == 2)
+ return FSL_DDR_CS0_CS1;
+#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+ if (pdimm[0].n_ranks == 4)
+ return FSL_DDR_CS0_CS1_CS2_CS3;
+#endif
+ if (pdimm[0].n_ranks == 2) {
+ if (pdimm[1].n_ranks == 2)
+ return FSL_DDR_CS0_CS1_CS2_CS3;
+ else
+ return FSL_DDR_CS0_CS1;
+ }
+#endif
+ return 0;
+}
+
unsigned int populate_memctl_options(int all_DIMMs_registered,
memctl_options_t *popts,
dimm_params_t *pdimm,
@@ -510,6 +538,14 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
}
} else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) {
switch (pdimm[0].n_ranks) {
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+ case 4:
+ pdodt = single_Q;
+ if (pdimm[1].n_ranks)
+ printf("Error: Quad- and Dual-rank DIMMs "
+ "cannot be used together\n");
+ break;
+#endif
case 2:
switch (pdimm[1].n_ranks) {
case 2:
@@ -900,6 +936,9 @@ done:
else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
"cs0_cs1_cs2_cs3", buf))
popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_CS2_CS3;
+ else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
+ "auto", buf))
+ popts->ba_intlv_ctl = auto_bank_intlv(pdimm);
else
printf("hwconfig has unrecognized parameter for bank_intlv.\n");
switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
@@ -912,6 +951,10 @@ done:
"interleaving disabled!\n", ctrl_num);
}
#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+ if (pdimm[0].n_ranks == 4)
+ break;
+#endif
if ((pdimm[0].n_ranks < 2) && (pdimm[1].n_ranks < 2)) {
popts->ba_intlv_ctl = 0;
printf("Not enough bank(chip-select) for "
@@ -1063,7 +1106,7 @@ void check_interleaving_options(fsl_ddr_info_t *pinfo)
break;
}
debug("%d of %d controllers are interleaving.\n", j, k);
- if (j != k) {
+ if (j && (j != k)) {
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
pinfo->memctl_opts[i].memctl_interleaving = 0;
printf("Not all controllers have compatible "
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
index 664ad09..940ffff 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
@@ -121,6 +121,16 @@ void fsl_ddr_set_intl3r(const unsigned int granule_size)
#endif
}
+u32 fsl_ddr_get_intl3r(void)
+{
+ u32 val = 0;
+#ifdef CONFIG_E6500
+ u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
+ val = *mcintl3r;
+#endif
+ return val;
+}
+
void board_add_ram_info(int use_default)
{
#if defined(CONFIG_MPC83xx)
@@ -140,6 +150,18 @@ void board_add_ram_info(int use_default)
uint32_t sdram_cfg = in_be32(&ddr->sdram_cfg);
int cas_lat;
+#if CONFIG_NUM_DDR_CONTROLLERS >= 2
+ if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
+ ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
+ sdram_cfg = in_be32(&ddr->sdram_cfg);
+ }
+#endif
+#if CONFIG_NUM_DDR_CONTROLLERS >= 3
+ if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
+ ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR3_ADDR;
+ sdram_cfg = in_be32(&ddr->sdram_cfg);
+ }
+#endif
puts(" (DDR");
switch ((sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >>
SDRAM_CFG_SDRAM_TYPE_SHIFT) {
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index 32ab050..68db8e2 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -139,6 +139,8 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
const char *phys[] = { "ulpi", "utmi" };
const char *mode = NULL;
const char *phy_type = NULL;
+ const char *dr_mode_type = NULL;
+ const char *dr_phy_type = NULL;
char usb1_defined = 0;
int usb_mode_off = -1;
int usb_phy_off = -1;
@@ -156,6 +158,7 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
break;
}
}
+
for (j = 0; j < ARRAY_SIZE(phys); j++) {
if (hwconfig_subarg_cmp(str, "phy_type",
phys[j])) {
@@ -163,31 +166,46 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
break;
}
}
- if (mode_idx >= 0) {
- usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
- modes[mode_idx], NULL, usb_mode_off);
- if (usb_mode_off < 0)
- return;
- }
- if (phy_idx >= 0) {
- usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
- NULL, phys[phy_idx], usb_phy_off);
- if (usb_phy_off < 0)
- return;
- }
+
+ dr_mode_type = modes[mode_idx];
+ dr_phy_type = phys[phy_idx];
+
+ /* use usb_dr_mode and usb_phy_type if
+ usb1_defined = 0; these variables are to
+ be deprecated */
if (!strcmp(str, "usb1"))
usb1_defined = 1;
- if (mode_idx < 0 && phy_idx < 0)
+
+ if (mode_idx < 0 && phy_idx < 0) {
printf("WARNING: invalid phy or mode\n");
+ return;
+ }
}
+
+ usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
+ dr_mode_type, NULL, usb_mode_off);
+
+ if (usb_mode_off < 0)
+ return;
+
+ usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
+ NULL, dr_phy_type, usb_phy_off);
+
+ if (usb_phy_off < 0)
+ return;
}
+
if (!usb1_defined) {
int usb_off = -1;
mode = getenv("usb_dr_mode");
phy_type = getenv("usb_phy_type");
- if (!mode && !phy_type)
- return;
- fdt_fixup_usb_mode_phy_type(blob, mode, phy_type, usb_off);
+ if (mode || phy_type) {
+ printf("WARNING: usb_dr_mode and usb_phy_type "
+ "are to be deprecated soon. Use "
+ "hwconfig to set these values instead!!\n");
+ fdt_fixup_usb_mode_phy_type(blob, mode,
+ phy_type, usb_off);
+ }
}
}
#endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */
diff --git a/arch/powerpc/cpu/mpc8xxx/srio.c b/arch/powerpc/cpu/mpc8xxx/srio.c
index 0cb65b3..6e6f7dc 100644
--- a/arch/powerpc/cpu/mpc8xxx/srio.c
+++ b/arch/powerpc/cpu/mpc8xxx/srio.c
@@ -22,7 +22,9 @@
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
#include <asm/fsl_srio.h>
+#include <asm/errno.h>
+#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
#define SRIO_PORT_ACCEPT_ALL 0x10000001
#define SRIO_IB_ATMU_AR 0x80f55000
#define SRIO_OB_ATMU_AR_MAINT 0x80077000
@@ -31,10 +33,16 @@
#define SRIO_MAINT_WIN_SIZE 0x1000000 /* 16M */
#define SRIO_RW_WIN_SIZE 0x100000 /* 1M */
#define SRIO_LCSBA1CSR 0x60000000
+#endif
#if defined(CONFIG_FSL_CORENET)
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ #define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR3_SRIO1
+ #define _DEVDISR_SRIO2 FSL_CORENET_DEVDISR3_SRIO2
+#else
#define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR_SRIO1
#define _DEVDISR_SRIO2 FSL_CORENET_DEVDISR_SRIO2
+#endif
#define _DEVDISR_RMU FSL_CORENET_DEVDISR_RMU
#define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR
#elif defined(CONFIG_MPC85xx)
@@ -52,16 +60,206 @@
#error "No defines for DEVDISR_SRIO"
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+/*
+ * Erratum A-004034
+ * Affects: SRIO
+ * Description: During port initialization, the SRIO port performs
+ * lane synchronization (detecting valid symbols on a lane) and
+ * lane alignment (coordinating multiple lanes to receive valid data
+ * across lanes). Internal errors in lane synchronization and lane
+ * alignment may cause failure to achieve link initialization at
+ * the configured port width.
+ * An SRIO port configured as a 4x port may see one of these scenarios:
+ * 1. One or more lanes fails to achieve lane synchronization. Depending
+ * on which lanes fail, this may result in downtraining from 4x to 1x
+ * on lane 0, 4x to 1x on lane R (redundant lane).
+ * 2. The link may fail to achieve lane alignment as a 4x, even though
+ * all 4 lanes achieve lane synchronization, and downtrain to a 1x.
+ * An SRIO port configured as a 1x port may fail to complete port
+ * initialization (PnESCSR[PU] never deasserts) because of scenario 1.
+ * Impact: SRIO port may downtrain to 1x, or may fail to complete
+ * link initialization. Once a port completes link initialization
+ * successfully, it will operate normally.
+ */
+static int srio_erratum_a004034(u8 port)
+{
+ serdes_corenet_t *srds_regs;
+ u32 conf_lane;
+ u32 init_lane;
+ int idx, first, last;
+ u32 i;
+ unsigned long long end_tick;
+ struct ccsr_rio *srio_regs = (void *)CONFIG_SYS_FSL_SRIO_ADDR;
+
+ srds_regs = (void *)(CONFIG_SYS_FSL_CORENET_SERDES_ADDR);
+ conf_lane = (in_be32((void *)&srds_regs->srdspccr0)
+ >> (12 - port * 4)) & 0x3;
+ init_lane = (in_be32((void *)&srio_regs->lp_serial
+ .port[port].pccsr) >> 27) & 0x7;
+
+ /*
+ * Start a counter set to ~2 ms after the SERDES reset is
+ * complete (SERDES SRDSBnRSTCTL[RST_DONE]=1 for n
+ * corresponding to the SERDES bank/PLL for the SRIO port).
+ */
+ if (in_be32((void *)&srds_regs->bank[0].rstctl)
+ & SRDS_RSTCTL_RSTDONE) {
+ /*
+ * Poll the port uninitialized status (SRIO PnESCSR[PO]) until
+ * PO=1 or the counter expires. If the counter expires, the
+ * port has failed initialization: go to recover steps. If PO=1
+ * and the desired port width is 1x, go to normal steps. If
+ * PO = 1 and the desired port width is 4x, go to recover steps.
+ */
+ end_tick = usec2ticks(2000) + get_ticks();
+ do {
+ if (in_be32((void *)&srio_regs->lp_serial
+ .port[port].pescsr) & 0x2) {
+ if (conf_lane == 0x1)
+ goto host_ok;
+ else {
+ if (init_lane == 0x2)
+ goto host_ok;
+ else
+ break;
+ }
+ }
+ } while (end_tick > get_ticks());
+
+ /* recover at most 3 times */
+ for (i = 0; i < 3; i++) {
+ /* Set SRIO PnCCSR[PD]=1 */
+ setbits_be32((void *)&srio_regs->lp_serial
+ .port[port].pccsr,
+ 0x800000);
+ /*
+ * Set SRIO PnPCR[OBDEN] on the host to
+ * enable the discarding of any pending packets.
+ */
+ setbits_be32((void *)&srio_regs->impl.port[port].pcr,
+ 0x04);
+ /* Wait 50 us */
+ udelay(50);
+ /* Run sync command */
+ isync();
+
+ if (port)
+ first = serdes_get_first_lane(SRIO2);
+ else
+ first = serdes_get_first_lane(SRIO1);
+ if (unlikely(first < 0))
+ return -ENODEV;
+ if (conf_lane == 0x1)
+ last = first;
+ else
+ last = first + 3;
+ /*
+ * Set SERDES BnGCRm0[RRST]=0 for each SRIO
+ * bank n and lane m.
+ */
+ for (idx = first; idx <= last; idx++)
+ clrbits_be32(&srds_regs->lane[idx].gcr0,
+ SRDS_GCR0_RRST);
+ /*
+ * Read SERDES BnGCRm0 for each SRIO
+ * bank n and lane m
+ */
+ for (idx = first; idx <= last; idx++)
+ in_be32(&srds_regs->lane[idx].gcr0);
+ /* Run sync command */
+ isync();
+ /* Wait >= 100 ns */
+ udelay(1);
+ /*
+ * Set SERDES BnGCRm0[RRST]=1 for each SRIO
+ * bank n and lane m.
+ */
+ for (idx = first; idx <= last; idx++)
+ setbits_be32(&srds_regs->lane[idx].gcr0,
+ SRDS_GCR0_RRST);
+ /*
+ * Read SERDES BnGCRm0 for each SRIO
+ * bank n and lane m
+ */
+ for (idx = first; idx <= last; idx++)
+ in_be32(&srds_regs->lane[idx].gcr0);
+ /* Run sync command */
+ isync();
+ /* Wait >= 300 ns */
+ udelay(1);
+
+ /* Write 1 to clear all bits in SRIO PnSLCSR */
+ out_be32((void *)&srio_regs->impl.port[port].slcsr,
+ 0xffffffff);
+ /* Clear SRIO PnPCR[OBDEN] on the host */
+ clrbits_be32((void *)&srio_regs->impl.port[port].pcr,
+ 0x04);
+ /* Set SRIO PnCCSR[PD]=0 */
+ clrbits_be32((void *)&srio_regs->lp_serial
+ .port[port].pccsr,
+ 0x800000);
+ /* Wait >= 24 ms */
+ udelay(24000);
+ /* Poll the state of the port again */
+ init_lane =
+ (in_be32((void *)&srio_regs->lp_serial
+ .port[port].pccsr) >> 27) & 0x7;
+ if (in_be32((void *)&srio_regs->lp_serial
+ .port[port].pescsr) & 0x2) {
+ if (conf_lane == 0x1)
+ goto host_ok;
+ else {
+ if (init_lane == 0x2)
+ goto host_ok;
+ }
+ }
+ if (i == 2)
+ return -ENODEV;
+ }
+ } else
+ return -ENODEV;
+
+host_ok:
+ /* Poll PnESCSR[OES] on the host until it is clear */
+ end_tick = usec2ticks(1000000) + get_ticks();
+ do {
+ if (!(in_be32((void *)&srio_regs->lp_serial.port[port].pescsr)
+ & 0x10000)) {
+ out_be32(((void *)&srio_regs->lp_serial
+ .port[port].pescsr), 0xffffffff);
+ out_be32(((void *)&srio_regs->phys_err
+ .port[port].edcsr), 0);
+ out_be32(((void *)&srio_regs->logical_err.ltledcsr), 0);
+ return 0;
+ }
+ } while (end_tick > get_ticks());
+
+ return -ENODEV;
+}
+#endif
+
void srio_init(void)
{
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR;
int srio1_used = 0, srio2_used = 0;
+ u32 *devdisr;
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ devdisr = &gur->devdisr3;
+#else
+ devdisr = &gur->devdisr;
+#endif
if (is_serdes_configured(SRIO1)) {
set_next_law(CONFIG_SYS_SRIO1_MEM_PHYS,
law_size_bits(CONFIG_SYS_SRIO1_MEM_SIZE),
LAW_TRGT_IF_RIO_1);
srio1_used = 1;
+#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+ if (srio_erratum_a004034(0) < 0)
+ printf("SRIO1: enabled but port error\n");
+ else
+#endif
printf("SRIO1: enabled\n");
} else {
printf("SRIO1: disabled\n");
@@ -73,7 +271,13 @@ void srio_init(void)
law_size_bits(CONFIG_SYS_SRIO2_MEM_SIZE),
LAW_TRGT_IF_RIO_2);
srio2_used = 1;
+#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+ if (srio_erratum_a004034(1) < 0)
+ printf("SRIO2: enabled but port error\n");
+ else
+#endif
printf("SRIO2: enabled\n");
+
} else {
printf("SRIO2: disabled\n");
}
@@ -82,20 +286,20 @@ void srio_init(void)
#ifdef CONFIG_FSL_CORENET
/* On FSL_CORENET devices we can disable individual ports */
if (!srio1_used)
- setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO1);
+ setbits_be32(devdisr, _DEVDISR_SRIO1);
if (!srio2_used)
- setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO2);
+ setbits_be32(devdisr, _DEVDISR_SRIO2);
#endif
/* neither port is used - disable everything */
if (!srio1_used && !srio2_used) {
- setbits_be32(&gur->devdisr, _DEVDISR_SRIO1);
- setbits_be32(&gur->devdisr, _DEVDISR_SRIO2);
- setbits_be32(&gur->devdisr, _DEVDISR_RMU);
+ setbits_be32(devdisr, _DEVDISR_SRIO1);
+ setbits_be32(devdisr, _DEVDISR_SRIO2);
+ setbits_be32(devdisr, _DEVDISR_RMU);
}
}
-#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
void srio_boot_master(int port)
{
struct ccsr_rio *srio = (void *)CONFIG_SYS_FSL_SRIO_ADDR;