summaryrefslogtreecommitdiff
path: root/arch/powerpc/cpu/ppc4xx/cpu_init.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/cpu/ppc4xx/cpu_init.c')
-rw-r--r--arch/powerpc/cpu/ppc4xx/cpu_init.c456
1 files changed, 456 insertions, 0 deletions
diff --git a/arch/powerpc/cpu/ppc4xx/cpu_init.c b/arch/powerpc/cpu/ppc4xx/cpu_init.c
new file mode 100644
index 0000000..8a6e545
--- /dev/null
+++ b/arch/powerpc/cpu/ppc4xx/cpu_init.c
@@ -0,0 +1,456 @@
+/*
+ * (C) Copyright 2000-2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <ppc4xx_enet.h>
+#include <asm/processor.h>
+#include <asm/gpio.h>
+#include <ppc4xx.h>
+
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
+#ifndef CONFIG_SYS_PLL_RECONFIG
+#define CONFIG_SYS_PLL_RECONFIG 0
+#endif
+
+void reconfigure_pll(u32 new_cpu_freq)
+{
+#if defined(CONFIG_440EPX)
+ int reset_needed = 0;
+ u32 reg, temp;
+ u32 prbdv0, target_prbdv0, /* CLK_PRIMBD */
+ fwdva, target_fwdva, fwdvb, target_fwdvb, /* CLK_PLLD */
+ fbdv, target_fbdv, lfbdv, target_lfbdv,
+ perdv0, target_perdv0, /* CLK_PERD */
+ spcid0, target_spcid0; /* CLK_SPCID */
+
+ /* Reconfigure clocks if necessary.
+ * See PPC440EPx User's Manual, sections 8.2 and 14 */
+ if (new_cpu_freq == 667) {
+ target_prbdv0 = 2;
+ target_fwdva = 2;
+ target_fwdvb = 4;
+ target_fbdv = 20;
+ target_lfbdv = 1;
+ target_perdv0 = 4;
+ target_spcid0 = 4;
+
+ mfcpr(CPR0_PRIMBD0, reg);
+ temp = (reg & PRBDV_MASK) >> 24;
+ prbdv0 = temp ? temp : 8;
+ if (prbdv0 != target_prbdv0) {
+ reg &= ~PRBDV_MASK;
+ reg |= ((target_prbdv0 == 8 ? 0 : target_prbdv0) << 24);
+ mtcpr(CPR0_PRIMBD0, reg);
+ reset_needed = 1;
+ }
+
+ mfcpr(CPR0_PLLD, reg);
+
+ temp = (reg & PLLD_FWDVA_MASK) >> 16;
+ fwdva = temp ? temp : 16;
+
+ temp = (reg & PLLD_FWDVB_MASK) >> 8;
+ fwdvb = temp ? temp : 8;
+
+ temp = (reg & PLLD_FBDV_MASK) >> 24;
+ fbdv = temp ? temp : 32;
+
+ temp = (reg & PLLD_LFBDV_MASK);
+ lfbdv = temp ? temp : 64;
+
+ if (fwdva != target_fwdva || fbdv != target_fbdv || lfbdv != target_lfbdv) {
+ reg &= ~(PLLD_FWDVA_MASK | PLLD_FWDVB_MASK |
+ PLLD_FBDV_MASK | PLLD_LFBDV_MASK);
+ reg |= ((target_fwdva == 16 ? 0 : target_fwdva) << 16) |
+ ((target_fwdvb == 8 ? 0 : target_fwdvb) << 8) |
+ ((target_fbdv == 32 ? 0 : target_fbdv) << 24) |
+ (target_lfbdv == 64 ? 0 : target_lfbdv);
+ mtcpr(CPR0_PLLD, reg);
+ reset_needed = 1;
+ }
+
+ mfcpr(CPR0_PERD, reg);
+ perdv0 = (reg & CPR0_PERD_PERDV0_MASK) >> 24;
+ if (perdv0 != target_perdv0) {
+ reg &= ~CPR0_PERD_PERDV0_MASK;
+ reg |= (target_perdv0 << 24);
+ mtcpr(CPR0_PERD, reg);
+ reset_needed = 1;
+ }
+
+ mfcpr(CPR0_SPCID, reg);
+ temp = (reg & CPR0_SPCID_SPCIDV0_MASK) >> 24;
+ spcid0 = temp ? temp : 4;
+ if (spcid0 != target_spcid0) {
+ reg &= ~CPR0_SPCID_SPCIDV0_MASK;
+ reg |= ((target_spcid0 == 4 ? 0 : target_spcid0) << 24);
+ mtcpr(CPR0_SPCID, reg);
+ reset_needed = 1;
+ }
+ }
+
+ /* Get current value of FWDVA.*/
+ mfcpr(CPR0_PLLD, reg);
+ temp = (reg & PLLD_FWDVA_MASK) >> 16;
+
+ /*
+ * Check to see if FWDVA has been set to value of 1. if it has we must
+ * modify it.
+ */
+ if (temp == 1) {
+ mfcpr(CPR0_PLLD, reg);
+ /* Get current value of fbdv. */
+ temp = (reg & PLLD_FBDV_MASK) >> 24;
+ fbdv = temp ? temp : 32;
+ /* Get current value of lfbdv. */
+ temp = (reg & PLLD_LFBDV_MASK);
+ lfbdv = temp ? temp : 64;
+ /*
+ * Load register that contains current boot strapping option.
+ */
+ mfcpr(CPR0_ICFG, reg);
+ /* Shift strapping option into low 3 bits.*/
+ reg = (reg >> 28);
+
+ if ((reg == BOOT_STRAP_OPTION_A) || (reg == BOOT_STRAP_OPTION_B) ||
+ (reg == BOOT_STRAP_OPTION_D) || (reg == BOOT_STRAP_OPTION_E)) {
+ /*
+ * Get current value of FWDVA. Assign current FWDVA to
+ * new FWDVB.
+ */
+ mfcpr(CPR0_PLLD, reg);
+ target_fwdvb = (reg & PLLD_FWDVA_MASK) >> 16;
+ fwdvb = target_fwdvb ? target_fwdvb : 8;
+ /*
+ * Get current value of FWDVB. Assign current FWDVB to
+ * new FWDVA.
+ */
+ target_fwdva = (reg & PLLD_FWDVB_MASK) >> 8;
+ fwdva = target_fwdva ? target_fwdva : 16;
+ /*
+ * Update CPR0_PLLD with switched FWDVA and FWDVB.
+ */
+ reg &= ~(PLLD_FWDVA_MASK | PLLD_FWDVB_MASK |
+ PLLD_FBDV_MASK | PLLD_LFBDV_MASK);
+ reg |= ((fwdva == 16 ? 0 : fwdva) << 16) |
+ ((fwdvb == 8 ? 0 : fwdvb) << 8) |
+ ((fbdv == 32 ? 0 : fbdv) << 24) |
+ (lfbdv == 64 ? 0 : lfbdv);
+ mtcpr(CPR0_PLLD, reg);
+ /* Acknowledge that a reset is required. */
+ reset_needed = 1;
+ }
+ }
+
+ if (reset_needed) {
+ /*
+ * Set reload inhibit so configuration will persist across
+ * processor resets
+ */
+ mfcpr(CPR0_ICFG, reg);
+ reg &= ~CPR0_ICFG_RLI_MASK;
+ reg |= 1 << 31;
+ mtcpr(CPR0_ICFG, reg);
+
+ /* Reset processor if configuration changed */
+ __asm__ __volatile__ ("sync; isync");
+ mtspr(SPRN_DBCR0, 0x20000000);
+ }
+#endif
+}
+
+/*
+ * Breath some life into the CPU...
+ *
+ * Reconfigure PLL if necessary,
+ * set up the memory map,
+ * initialize a bunch of registers
+ */
+void
+cpu_init_f (void)
+{
+#if defined(CONFIG_WATCHDOG) || defined(CONFIG_440GX) || defined(CONFIG_460EX)
+ u32 val;
+#endif
+
+ reconfigure_pll(CONFIG_SYS_PLL_RECONFIG);
+
+#if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CONFIG_SYS_4xx_GPIO_TABLE)
+ /*
+ * GPIO0 setup (select GPIO or alternate function)
+ */
+#if defined(CONFIG_SYS_GPIO0_OR)
+ out32(GPIO0_OR, CONFIG_SYS_GPIO0_OR); /* set initial state of output pins */
+#endif
+#if defined(CONFIG_SYS_GPIO0_ODR)
+ out32(GPIO0_ODR, CONFIG_SYS_GPIO0_ODR); /* open-drain select */
+#endif
+ out32(GPIO0_OSRH, CONFIG_SYS_GPIO0_OSRH); /* output select */
+ out32(GPIO0_OSRL, CONFIG_SYS_GPIO0_OSRL);
+ out32(GPIO0_ISR1H, CONFIG_SYS_GPIO0_ISR1H); /* input select */
+ out32(GPIO0_ISR1L, CONFIG_SYS_GPIO0_ISR1L);
+ out32(GPIO0_TSRH, CONFIG_SYS_GPIO0_TSRH); /* three-state select */
+ out32(GPIO0_TSRL, CONFIG_SYS_GPIO0_TSRL);
+#if defined(CONFIG_SYS_GPIO0_ISR2H)
+ out32(GPIO0_ISR2H, CONFIG_SYS_GPIO0_ISR2H);
+ out32(GPIO0_ISR2L, CONFIG_SYS_GPIO0_ISR2L);
+#endif
+#if defined (CONFIG_SYS_GPIO0_TCR)
+ out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR); /* enable output driver for outputs */
+#endif
+#endif /* CONFIG_405EP ... && !CONFIG_SYS_4xx_GPIO_TABLE */
+
+#if defined (CONFIG_405EP)
+ /*
+ * Set EMAC noise filter bits
+ */
+ mtdcr(CPC0_EPCTL, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE);
+#endif /* CONFIG_405EP */
+
+#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
+ gpio_set_chip_configuration();
+#endif /* CONFIG_SYS_4xx_GPIO_TABLE */
+
+ /*
+ * External Bus Controller (EBC) Setup
+ */
+#if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))
+#if (defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+ defined(CONFIG_405EX) || defined(CONFIG_405))
+ /*
+ * Move the next instructions into icache, since these modify the flash
+ * we are running from!
+ */
+ asm volatile(" bl 0f" ::: "lr");
+ asm volatile("0: mflr 3" ::: "r3");
+ asm volatile(" addi 4, 0, 14" ::: "r4");
+ asm volatile(" mtctr 4" ::: "ctr");
+ asm volatile("1: icbt 0, 3");
+ asm volatile(" addi 3, 3, 32" ::: "r3");
+ asm volatile(" bdnz 1b" ::: "ctr", "cr0");
+ asm volatile(" addis 3, 0, 0x0" ::: "r3");
+ asm volatile(" ori 3, 3, 0xA000" ::: "r3");
+ asm volatile(" mtctr 3" ::: "ctr");
+ asm volatile("2: bdnz 2b" ::: "ctr", "cr0");
+#endif
+
+ mtebc(PB0AP, CONFIG_SYS_EBC_PB0AP);
+ mtebc(PB0CR, CONFIG_SYS_EBC_PB0CR);
+#endif
+
+#if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 1))
+ mtebc(PB1AP, CONFIG_SYS_EBC_PB1AP);
+ mtebc(PB1CR, CONFIG_SYS_EBC_PB1CR);
+#endif
+
+#if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 2))
+ mtebc(PB2AP, CONFIG_SYS_EBC_PB2AP);
+ mtebc(PB2CR, CONFIG_SYS_EBC_PB2CR);
+#endif
+
+#if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 3))
+ mtebc(PB3AP, CONFIG_SYS_EBC_PB3AP);
+ mtebc(PB3CR, CONFIG_SYS_EBC_PB3CR);
+#endif
+
+#if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 4))
+ mtebc(PB4AP, CONFIG_SYS_EBC_PB4AP);
+ mtebc(PB4CR, CONFIG_SYS_EBC_PB4CR);
+#endif
+
+#if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 5))
+ mtebc(PB5AP, CONFIG_SYS_EBC_PB5AP);
+ mtebc(PB5CR, CONFIG_SYS_EBC_PB5CR);
+#endif
+
+#if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 6))
+ mtebc(PB6AP, CONFIG_SYS_EBC_PB6AP);
+ mtebc(PB6CR, CONFIG_SYS_EBC_PB6CR);
+#endif
+
+#if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 7))
+ mtebc(PB7AP, CONFIG_SYS_EBC_PB7AP);
+ mtebc(PB7CR, CONFIG_SYS_EBC_PB7CR);
+#endif
+
+#if defined (CONFIG_SYS_EBC_CFG)
+ mtebc(EBC0_CFG, CONFIG_SYS_EBC_CFG);
+#endif
+
+#if defined(CONFIG_WATCHDOG)
+ val = mfspr(tcr);
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+ val |= 0xb8000000; /* generate system reset after 1.34 seconds */
+#elif defined(CONFIG_440EPX)
+ val |= 0xb0000000; /* generate system reset after 1.34 seconds */
+#else
+ val |= 0xf0000000; /* generate system reset after 2.684 seconds */
+#endif
+#if defined(CONFIG_SYS_4xx_RESET_TYPE)
+ val &= ~0x30000000; /* clear WRC bits */
+ val |= CONFIG_SYS_4xx_RESET_TYPE << 28; /* set board specific WRC type */
+#endif
+ mtspr(tcr, val);
+
+ val = mfspr(tsr);
+ val |= 0x80000000; /* enable watchdog timer */
+ mtspr(tsr, val);
+
+ reset_4xx_watchdog();
+#endif /* CONFIG_WATCHDOG */
+
+#if defined(CONFIG_440GX)
+ /* Take the GX out of compatibility mode
+ * Travis Sawyer, 9 Mar 2004
+ * NOTE: 440gx user manual inconsistency here
+ * Compatibility mode and Ethernet Clock select are not
+ * correct in the manual
+ */
+ mfsdr(SDR0_MFR, val);
+ val &= ~0x10000000;
+ mtsdr(SDR0_MFR,val);
+#endif /* CONFIG_440GX */
+
+#if defined(CONFIG_460EX)
+ /*
+ * Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and
+ * clear SDR0_AHB_CFG[A2P_PROT2] (bit 25) for a new 460EX errata
+ * regarding concurrent use of AHB USB OTG, USB 2.0 host and SATA
+ */
+ mfsdr(SDR0_AHB_CFG, val);
+ val |= 0x80;
+ val &= ~0x40;
+ mtsdr(SDR0_AHB_CFG, val);
+ mfsdr(SDR0_USB2HOST_CFG, val);
+ val &= ~0xf00;
+ val |= 0x400;
+ mtsdr(SDR0_USB2HOST_CFG, val);
+#endif /* CONFIG_460EX */
+
+#if defined(CONFIG_405EX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_460SX)
+ /*
+ * Set PLB4 arbiter (Segment 0 and 1) to 4 deep pipeline read
+ */
+ mtdcr(PLB0_ACR, (mfdcr(PLB0_ACR) & ~PLB0_ACR_RDP_MASK) |
+ PLB0_ACR_RDP_4DEEP);
+ mtdcr(PLB1_ACR, (mfdcr(PLB1_ACR) & ~PLB1_ACR_RDP_MASK) |
+ PLB1_ACR_RDP_4DEEP);
+#endif /* CONFIG_440SP/SPE || CONFIG_460EX/GT || CONFIG_405EX */
+}
+
+/*
+ * initialize higher level parts of CPU like time base and timers
+ */
+int cpu_init_r (void)
+{
+#if defined(CONFIG_405GP)
+ uint pvr = get_pvr();
+
+ /*
+ * Set edge conditioning circuitry on PPC405GPr
+ * for compatibility to existing PPC405GP designs.
+ */
+ if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
+ mtdcr(CPC0_ECR, 0x60606000);
+ }
+#endif /* defined(CONFIG_405GP) */
+
+ return 0;
+}
+
+#if defined(CONFIG_PCI) && \
+ (defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRX))
+/*
+ * 440EP(x)/GR(x) PCI async/sync clocking restriction:
+ *
+ * In asynchronous PCI mode, the synchronous PCI clock must meet
+ * certain requirements. The following equation describes the
+ * relationship that must be maintained between the asynchronous PCI
+ * clock and synchronous PCI clock. Select an appropriate PCI:PLB
+ * ratio to maintain the relationship:
+ *
+ * AsyncPCIClk - 1MHz <= SyncPCIclock <= (2 * AsyncPCIClk) - 1MHz
+ */
+static int ppc4xx_pci_sync_clock_ok(u32 sync, u32 async)
+{
+ if (((async - 1000000) > sync) || (sync > ((2 * async) - 1000000)))
+ return 0;
+ else
+ return 1;
+}
+
+int ppc4xx_pci_sync_clock_config(u32 async)
+{
+ sys_info_t sys_info;
+ u32 sync;
+ int div;
+ u32 reg;
+ u32 spcid_val[] = {
+ CPR0_SPCID_SPCIDV0_DIV1, CPR0_SPCID_SPCIDV0_DIV2,
+ CPR0_SPCID_SPCIDV0_DIV3, CPR0_SPCID_SPCIDV0_DIV4 };
+
+ get_sys_info(&sys_info);
+ sync = sys_info.freqPCI;
+
+ /*
+ * First check if the equation above is met
+ */
+ if (!ppc4xx_pci_sync_clock_ok(sync, async)) {
+ /*
+ * Reconfigure PCI sync clock to meet the equation.
+ * Start with highest possible PCI sync frequency
+ * (divider 1).
+ */
+ for (div = 1; div <= 4; div++) {
+ sync = sys_info.freqPLB / div;
+ if (ppc4xx_pci_sync_clock_ok(sync, async))
+ break;
+ }
+
+ if (div <= 4) {
+ mtcpr(CPR0_SPCID, spcid_val[div]);
+
+ mfcpr(CPR0_ICFG, reg);
+ reg |= CPR0_ICFG_RLI_MASK;
+ mtcpr(CPR0_ICFG, reg);
+
+ /* do chip reset */
+ mtspr(SPRN_DBCR0, 0x20000000);
+ } else {
+ /* Impossible to configure the PCI sync clock */
+ return -1;
+ }
+ }
+
+ return 0;
+}
+#endif