diff options
Diffstat (limited to 'arch/powerpc/cpu/mpc8xx')
-rw-r--r-- | arch/powerpc/cpu/mpc8xx/cpu_init.c | 21 | ||||
-rw-r--r-- | arch/powerpc/cpu/mpc8xx/scc.c | 23 | ||||
-rw-r--r-- | arch/powerpc/cpu/mpc8xx/serial.c | 8 | ||||
-rw-r--r-- | arch/powerpc/cpu/mpc8xx/wlkbd.c | 20 |
4 files changed, 2 insertions, 70 deletions
diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c b/arch/powerpc/cpu/mpc8xx/cpu_init.c index 53f873d..9c3102d 100644 --- a/arch/powerpc/cpu/mpc8xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc8xx/cpu_init.c @@ -29,12 +29,10 @@ void cpm_load_patch (volatile immap_t * immr); */ void cpu_init_f (volatile immap_t * immr) { -#ifndef CONFIG_MBX volatile memctl8xx_t *memctl = &immr->im_memctl; # ifdef CONFIG_SYS_PLPRCR ulong mfmask; # endif -#endif ulong reg; /* SYPCR - contains watchdog control (11-9) */ @@ -74,8 +72,6 @@ void cpu_init_f (volatile immap_t * immr) immr->im_clkrstk.cark_plprcrk = KAPWR_KEY; -#ifndef CONFIG_MBX /* MBX board does things different */ - /* If CONFIG_SYS_PLPRCR (set in the various *_config.h files) tries to * set the MF field, then just copy CONFIG_SYS_PLPRCR over car_plprcr, * otherwise OR in CONFIG_SYS_PLPRCR so we do not change the current MF @@ -142,7 +138,6 @@ void cpu_init_f (volatile immap_t * immr) defined(CONFIG_MHPC) || \ defined(CONFIG_R360MPI) || \ defined(CONFIG_RMU) || \ - defined(CONFIG_RPXCLASSIC) || \ defined(CONFIG_RPXLITE) || \ defined(CONFIG_SPC1920) || \ defined(CONFIG_SPD823TS) @@ -203,8 +198,6 @@ void cpu_init_f (volatile immap_t * immr) memctl->memc_br7 = CONFIG_SYS_BR7_PRELIM; #endif -#endif /* ! CONFIG_MBX */ - /* * Reset CPM */ @@ -213,20 +206,6 @@ void cpu_init_f (volatile immap_t * immr) __asm__ ("eieio"); } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG); -#ifdef CONFIG_MBX - /* - * on the MBX, things are a little bit different: - * - we need to read the VPD to get board information - * - the plprcr is set up dynamically - * - the memory controller is set up dynamically - */ - mbx_init (); -#endif /* CONFIG_MBX */ - -#ifdef CONFIG_RPXCLASSIC - rpxclassic_init (); -#endif - #if defined(CONFIG_RPXLITE) && defined(CONFIG_ENV_IS_IN_NVRAM) rpxlite_init (); #endif diff --git a/arch/powerpc/cpu/mpc8xx/scc.c b/arch/powerpc/cpu/mpc8xx/scc.c index 2ef77b4..5da6973 100644 --- a/arch/powerpc/cpu/mpc8xx/scc.c +++ b/arch/powerpc/cpu/mpc8xx/scc.c @@ -461,23 +461,6 @@ static int scc_init (struct eth_device *dev, bd_t * bis) #error Configuration Error: exactly ONE of PB_ENET_TENA, PC_ENET_TENA must be defined #endif -#if defined(CONFIG_ADS) && defined(CONFIG_MPC860) - /* - * Port C is used to control the PHY,MC68160. - */ - immr->im_ioport.iop_pcdir |= - (PC_ENET_ETHLOOP | PC_ENET_TPFLDL | PC_ENET_TPSQEL); - - immr->im_ioport.iop_pcdat |= PC_ENET_TPFLDL; - immr->im_ioport.iop_pcdat &= ~(PC_ENET_ETHLOOP | PC_ENET_TPSQEL); - *((uint *) BCSR1) &= ~BCSR1_ETHEN; -#endif /* MPC860ADS */ - -#ifdef CONFIG_RPXCLASSIC - *((uchar *) BCSR0) &= ~BCSR0_ETHLPBK; - *((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX); -#endif - #ifdef CONFIG_RPXLITE *((uchar *) BCSR0) |= BCSR0_ETHEN; #endif @@ -492,10 +475,6 @@ static int scc_init (struct eth_device *dev, bd_t * bis) immr->im_cpm.cp_pbdat &= ~0x00000010; #endif /* QS860T */ -#ifdef CONFIG_MBX - board_ether_init (); -#endif - #if defined(CONFIG_NETVIA) #if defined(PA_ENET_PDN) immr->im_ioport.iop_papar &= ~PA_ENET_PDN; @@ -528,8 +507,6 @@ static int scc_init (struct eth_device *dev, bd_t * bis) */ #if defined (CONFIG_FADS) udelay (10000); /* wait 10 ms */ -#elif defined(CONFIG_RPXCLASSIC) - udelay (100000); /* wait 100 ms */ #endif return 1; diff --git a/arch/powerpc/cpu/mpc8xx/serial.c b/arch/powerpc/cpu/mpc8xx/serial.c index 4e84049..9321411 100644 --- a/arch/powerpc/cpu/mpc8xx/serial.c +++ b/arch/powerpc/cpu/mpc8xx/serial.c @@ -173,7 +173,7 @@ static int smc_init (void) # endif #endif -#if defined(CONFIG_FADS) || defined(CONFIG_ADS) +#if defined(CONFIG_FADS) /* Enable RS232 */ #if defined(CONFIG_8xx_CONS_SMC1) *((uint *) BCSR1) &= ~BCSR1_RS232EN_1; @@ -182,7 +182,7 @@ static int smc_init (void) #endif #endif /* CONFIG_FADS */ -#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) +#if defined(CONFIG_RPXLITE) /* Enable Monitor Port Transceiver */ *((uchar *) BCSR0) |= BCSR0_ENMONXCVR ; #endif /* CONFIG_RPXLITE */ @@ -225,10 +225,6 @@ static int smc_init (void) up->smc_tstate = 0; #endif -#if defined(CONFIG_MBX) - board_serial_init(); -#endif /* CONFIG_MBX */ - /* Set UART mode, 8 bit, no parity, one stop. * Enable receive and transmit. */ diff --git a/arch/powerpc/cpu/mpc8xx/wlkbd.c b/arch/powerpc/cpu/mpc8xx/wlkbd.c deleted file mode 100644 index 3a41c2f..0000000 --- a/arch/powerpc/cpu/mpc8xx/wlkbd.c +++ /dev/null @@ -1,20 +0,0 @@ -/* - * (C) Copyright 2000 - * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <config.h> - -#ifdef CONFIG_WL_4PPM_KEYBOARD - -/* WIP: Wireless keyboard on SMC - */ -int drv_wlkbd_init (void) -{ - return 0 ; -} - -#endif /* CONFIG_WL_4PPM_KEYBOARD */ |